Used Hugo Beck Ta 4415 for sale (11,258)

Condition: used, maximum load weight: 2,110 kg, overall weight: 2,700 kg, axle configuration: 2 axles, first registration: 03/2017, next inspection (TÜV): 04/2028, total width: 2,485 mm, total height: 2,400 mm, * Harbeck 6853 Cable Transport Trailer 2.7 t - 2 axles - new TÜV inspection - * Overall length: 4,466 mm - Width: 2,485 mm - Height: 2,400 mm * Permissible total weight: 2,700 kg - Unladen weight: 590 kg - Payload: 2,110 kg Dcjdpfx Aey Rg R Reipoh * German vehicle - German registration certificate - immediately available - * Please arrange an appointment to view * Contact: Mr. Andreas Vogel * The information provided online serves as a non-binding description. * They do not constitute guaranteed characteristics. * The seller is not liable for typing or data transmission errors. * Subject to change, errors, and prior sale.

Condition: new, Beckhoff AX5203 servo amplifier SN: 000523885, unused in sealed original packaging, 100% functional, delivery as per photos Dcsdpfx Asx Ht Dpjipoh

Condition: new, Beckhoff AX5203 servo amplifier SN: 000523830, unused in sealed original packaging, 100% fully functional, delivery as per photos Dodpfxjx Ht Dij Aipsch

Condition: ready for operation (used), A 3-side sealing packaging machine Beck is available. Processing materials: recyclable mono films/recycled material/bio film, product width range: 20mm-400mm, max. product height: 200mm, max. packaging capacity: 60cycles/min. Including beck heat shrink tunnel. Documentation available. An on-site inspection is possible by appointment. Dcjdpfx Aoxn Aamoipoh

Condition: used, Year of construction: 2014, Speed: 1450 rpm Motor: 2.4 kW Suction capacity / Flow rate: 70 m³/h Suction pressure: 3 mbar Tank: Operating pressure: 0.99 bar Capacity / Liters: 90 Operating temperature: 50°C Year of manufacture: 1989 No. 400 100 Storage location: Supplier Dodpfovvi Nnsx Aipsch

Condition: used, Year of construction: 2000, workpiece weight per basket 250 kg basket dimensions max. mm voltage pneumatisch Dcjdpfx Aisy Ty Dispjh weight of the machine ca. 400 kg dimensions of the machine ca. 1,35 x 1,50 x 2,35 m

Condition: used, Year of construction: 2008, functionality: unexamined, Beck Packautomaten Bundle Packer KV 540 on Year of Manufacture: 2002 Infeed and outfeed conveyor belts, each 2x 200mm belt width Clearance height: max. 250mm Sealing width: max. 540mm Product length: max. 340mm BECK shrink bundling machine with automatic product feed Collective packer type KV 540 HP - online Used machine: Year 2002 Ideal shrink bundling machine suitable for all company sizes. Bundling machine and shrink tunnel form a compact, space-saving unit. Versatile and mobile, can be used at various packing stations. max. sealing width: 540 mm max. product height: 250 mm max. product length: 340 mm Conveyor bar spacing: 38 mm (every 4th rivet fitted) Operating principle The KV 540 HP online easily processes all thermoplastic shrink films such as polyethylene, PVC and polypropylene, whether clear or printed. The system operates with two film rolls at once (upper and lower film). The machine is equipped with a photoelectric control and automatically adjusts the work cycle according to the product length. The product is fed into the machine either manually or automatically via product-specific feeding devices using the infeed conveyor belt, which triggers the closing of the sealing tools. Sealing is done with a continuously heated cutting and sealing blade. A precisely and steplessly adjustable temperature control of the sealing tools prevents unpleasant odours. The advanced film guiding system allows for packaging of items with varying heights and lengths in any sequence without machine adjustments. An integrated shrink tunnel attached to the bundling machine receives the loosely sealed products by means of an outfeed conveyor belt and shrinks the package tightly around the goods with precisely controlled hot air. Operating speed The machine’s hourly throughput in continuous operation is up to 1,000 packs, depending on the article size and feeding type. Standard Features - Pneumatically driven sealing blade - Film guidance for packaging products of different heights without machine changeover - Safety interlock with simultaneous product protection - Simple, adjustable electrics for sealing and shrink process - Thermostat-controlled shrink tunnel with various heat settings and continuously adjustable conveyor speed The machine meets VDE and safety regulations. Product transport: automatic via conveyor infeed and outfeed Power supply: 380 V three-phase, 50 Hz Power rating: 14 kW Heating capacity: adjustable from 4 - 12 kW Colour: Hammer finish, light grey Additional equipment Dcedpjy Ichasfx Aipsh - Hold-down device above the outfeed conveyor belts - Film pressure rollers at tunnel exit

Condition: ready for operation (used), Manufacturer: Beck -external sizes: 1700x1010x1400mm -Permeable cross section: 540x240mm -The temperature range: 0-400 °C Dodou Nuyiepfx Aipjch

Condition: used, functionality: fully functional, 1 unit conveyor belt Overall length: 1,600 mm Overall width: 800 mm Belt widths: 280 mm and 230 mm Dcsdpfx Aiey H I I Nspjh Working height: approx. 750–950 mm Connected load: 0.37 kW Speed regulated: approx. 19 m/min Mobile on castors with brake

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, Packaging machine Beck Fitpacker Junior FJ 1040 U - Used machine, year of manufacture 1998 - Minor repairs required The Fitpacker Junior offers high packing performance and is capable of processing products of various lengths in random order. A programmable logic controller (PLC) is mounted at the top of the control cabinet and can be easily operated via an intuitive interface. The packer is also equipped with a feed system specially designed for continuous line operation. Machine changeover times are minimized through a digital user interface and an adjustable forming shoulder. The control cabinet can be opened and swung out, ensuring optimal access for maintenance and reducing downtime. The film roll holder is positioned at an ergonomically appropriate working height. Operating speed: The actual production speed and effective net output depend on the format, type, and composition of products and can reach up to 2,000 packs per hour. Dsdpfx Asy H Egisipjch Features: - PLC control - Film overlap for waste-free operation - Ionization at film overlap - Adjustable forming shoulder - Wide seam sealing Technical data: Width adjustment range: 100 – 400 mm, stepless lateral adjustment Max. product pass-through height: 150 mm Connected load: 3 kW Dimensions (LxWxH): 2,700 x 1,800 x 1,700 mm Weight: approx. 750 kg Colour: Hammer finish paint, light grey

Condition: ready for operation (used), Year of construction: 2008, functionality: unexamined, Beck chain conveyor - as a feeding system for packaging machine SX 1750 - adjustable side guides, height 50 mm - pitch: approx. 575 mm - length: approx. 2,400 mm Dcjdpjy H D Tbefx Aipsh - working height: approx. 920–1000 mm - overall width: 680 mm - transport rollers and adjustable spindle feet

Condition: repair required (used), functionality: limited functionality, Packaging Machine Serial Packer S 1732 - Used machine, year of construction approx. 1986 - Inspected, tested, and ready for operation The machine is equipped with a photoelectric control system that adjusts the operating cycle according to the length of the product being packed. This allows for the packaging of items of varying lengths in any sequence. Height and lateral adjustments can be made in seconds using a handwheel. Operating Method The machine operates in cycles, fully automatic with photoelectric control. Products to be packaged are fed into the machine via a special infeed conveyor and are four-side sealed. Oil hydraulics ensure precise operation of the sealing unit. Sealing is performed using the impulse-cut sealing process and can be equipped with additional special sealing elements. By precisely and infinitely adjusting the temperature of the sealing tools, odors are avoided. Operating Speed The actual production speed and effective net throughput depend on the shape, type, and arrangement of the products, and can be up to 1,000 packs per hour. Standard Features - Special film waste rewinding unit - Film waste monitor - Hydraulically operated sealing stamp - Photoelectric package length control - Continuous endless longitudinal sealing - Impulse sealing with adjustable pre-heating for separating seam - Cycle-controlled transverse sealing - Special designs for precise film and product transport - Infinitely adjustable height and side settings - Wide-range adjustable electrics for sealing temperature, sealing impulse, sealing duration, and film control Dcsdpfsy H D Edsx Aipoh - Standard safety devices The machine complies with the VDE and safety regulations of its time. Working width: 170 - 320 mm, infinitely laterally adjustable Product height: max. 80 mm, depending on article, format, film quality and thickness Power supply: 380 V three-phase, 50 Hz Connected load: 3 kW Color: Hammer finish paint, light grey Additional Equipment 1 piece Special Infeed Conveyor integrated into the machine Height- and side-adjustable Conveyor length: 1,500 mm Conveyor width: 150 mm With stop motor and laterally adjustable guide rails

Condition: ready for operation (used), Year of construction: 2008, functionality: unexamined, DESCRIPTION Beck-Packautomaten Series Packer S1750 X Fully automatic film packaging machine for four-side product sealing Fully automated, conveyor belt feeding with light barrier control Operation: The Beck series packer operates fully automatically with photoelectric product detection. The goods to be packaged are conveyed on a transport belt into the cross sealing unit and are then sealed on all four sides in a step-by-step process. The film rolls are positioned above and below the transport belt. For the production of tight shrink packs, the packaging machine can be expanded into a complete film packaging line by integrating the proven, energy-saving Beck heat shrink tunnel. Technical data: Standard operator side: right Sealing bar width: 550 mm Sealing bar closure: servo-driven Sealing system: permanently heated Pass-through height: 100 mm Infeed belt width: 140 mm Outfeed belt width: 140 mm Product width: 150–500 mm Product length: 30 mm up to unlimited, with closure of sealing bar gap Speed control: infinitely variable with frequency converter from 19–40 m/min Capacity: up to 50 cycles/min* Longitudinal sealing: continuous operation Film: flat film, printed or plain, from 11 to 80 micron Film width: max. 650 mm Film roll diameter: max. 300 mm Machine length: 2,550 mm Machine width: 1,600 mm Dcedpfxey H Dyno Aipsh Machine height: approx. 1,700 mm Working height: 800–950 mm Electrical connection: 3N400V 50 Hz Connected load: approx. 3 kW Paint finish: cream white / green * Machine output depends on equipment, product, and film. Description: • Machine frame in steel sandwich construction • The sealing system is permanently heated and maintenance-free • With freely-programmable Siemens S7 PLC • Siemens operator panel: digital control unit OP7 • Easy format changeover via central width and height adjustment • Format data storage with simple menu and operator guidance • Inline product feeding, product indexing via light barrier, optionally horizontal or vertical scanning • Hold-down plates at the cross sealer with product scanning • Longitudinal sealing electrically actuated • Film unwind device integrated in the machine frame, without plug-in shaft (allows easy and quick film roll change) • Film rewind device with film break-control, high roll capacity • Film feed motor-driven, including end-of-film detection • Machine hood for optimum accessibility, all safety windows equipped with safety switches • Beck packaging systems meet CE conformity requirements Additional equipment: - Rotary encoder, swing-away side sealing system, needle perforation unit for the top film

Condition: ready for operation (used), Year of construction: 1995, functionality: unexamined, total length: 1,860 mm, total height: 1,500 mm, total width: 800 mm, type of input current: three-phase, input voltage: 400 V, input current: 27 A, power: 12 kW (16.32 HP), input frequency: 50 Hz, nominal power: 13 kW (17.68 HP), Thermal Shrink Tunnel HV 400 - Used machine, built in 1995 - Inspected, tested, and fully operational This high-performance shrink tunnel is designed for energy efficiency. The heating system and adjustable settings are highly variable, allowing for precise shrinking of film-wrapped products with various shapes and contours. Operating principle The thermal shrink tunnel operates with separate blowers for independently adjustable upper and lower heating. The machine is equipped with an electronic temperature controller and is designed for a maximum internal temperature of up to 250 °C. The conveyor speed is infinitely variable. Technical data Passage width: 400 mm Passage height: 130 mm Hood length: 1,000 mm Conveyor length: 1,860 mm Rod conveyor: Rotating rods with silicone coating, every second rivet fitted Power supply: 380 V three-phase, 50 Hz Heating capacity: Selectable from 2 - 10 kW Connected load: 12 kW Color: Hammertone light grey Dcodpoy H Dxksfx Aipoh Additional equipment: Temperature control with electronic regulator and contactless relay for precise temperature consistency Pressure rollers at the discharge end

Condition: ready for operation (used), Year of construction: 1998, functionality: unexamined, total length: 1,860 mm, total height: 1,400 mm, total width: 950 mm, Thermal Shrink Tunnel HV 401 LD - Used unit, year of manufacture approx. 1998 - Tested and operational The high-performance shrink tunnel is built in an energy-saving design. Thanks to its flexible heating system and adjustable settings, the machine can reliably shrink-wrap products of various contours with film. Operating principle The thermal shrink tunnel operates with separate blowers for independently adjustable top and bottom heat. It is equipped with an electronic temperature control system and is designed for a maximum internal temperature of up to 250°C. The conveyor speed is infinitely adjustable. Technical data Dodpfx Ajy H Dtusipech Passage width: 400 mm Passage height: 150 mm Hood length: 1,700 mm Conveyor length: 2,100 mm Rod conveyor: covered with Teflon mesh (as shown in the photos) Power supply: 380 V three-phase, 50 Hz Heating capacity: adjustable from 2 – 10 kW Rated connected load: 12 kW Color: light grey hammer finish Additional equipment: Temperature control with electronic controller and contactless relay for precise temperature stability

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, total length: 3,200 mm, total height: 1,500 mm, total width: 1,020 mm, type of input current: three-phase, product height (max.): 80 mm, product length (min.): 50 mm, product length (max.): 5,000 mm, product width (max.): 320 mm, product width (min.): 150 mm, input voltage: 400 V, input current: 5 A, working height: 800 mm, width of welding knife: 12 mm, length of welding knife: 360 mm, passage height: 100 mm, overall weight: 800 kg, power: 3 kW (4.08 HP), Packaging Machine Series Wrapper S 1732 with Conveyor Belt - Used equipment, year of manufacture: 2009 The machine is equipped with a photoelectric control system that adjusts the working cycle according to the length of the product to be packed. This allows products of varying lengths to be packed in any sequence. The machine's height and side adjustments can be made in seconds via a handwheel. Operating Principle: The machine operates in cycles, fully automatic, with photoelectric control. Products to be packed are fed into the machine via a special infeed conveyor and are sealed on all four sides. Oil-hydraulics ensure precise operation of the sealing unit. The sealing process uses an impulse-separation welding method and can be fitted with additional specialized sealing elements. An accurately adjustable, stepless temperature control of the sealing tools prevents unwanted odors. Operating Speed: The actual production speed and effective net output depend on the format, type, and composition of the products and can reach up to 1,500 packages per hour. Standard Features: - Special rewinding unit for film waste - Film waste monitoring - Hydraulically operated sealing plungers - Photoelectric control of product length - Continuous longitudinal sealing (endless) - Impulse sealing with adjustable pre-heating for separation seams - Cycle-controlled cross sealing - Special configurations for precise film and product conveyance - Stepless height and side adjustment - Broadly designed and adjustable electrical controls for sealing temperature, sealing impulse, sealing time, and film control - Standard safety equipment The machine complies with VDE and all safety regulations. Working width: 170 - 320 mm, stepless side adjustment Product height: max. 80 mm, depending on product, format, film quality, and thickness Power supply: 380 V three-phase, 50 Hz Connected load: 3 kW Colour: cream-white Additional Equipment: - 1 special infeed conveyor integrated into the machine • Height and side adjustable Dodpfxoy H Dqte Aipsch • Belt length: 1,500 mm • Belt width: 150 mm • With stop motor and laterally adjustable guide rails - 1 plug-in axle film supply rack • Expanding mandrel with mechanical clamping device for upper and lower film • For smooth film feed, suitable for film thicknesses from 12 µm • Max. roll diameter: 300 mm • Min. core inner diameter: 76 mm

Condition: refurbished (used), functionality: fully functional, total length: 3,200 mm, total height: 1,500 mm, total width: 1,020 mm, type of input current: three-phase, product height (max.): 80 mm, product length (min.): 50 mm, product length (max.): 5,000 mm, product width (max.): 320 mm, product width (min.): 150 mm, input voltage: 400 V, input current: 5 A, working height: 800 mm, width of welding knife: 12 mm, length of welding knife: 360 mm, passage height: 100 mm, overall weight: 800 kg, power: 3 kW (4.08 HP), Packaging Machine Serial Packer S 1732 - Used machine, year of manufacture: overhauled The machine is equipped with a photoelectric control system that regulates the operating cycle according to the length of the product to be packed. This allows items of varying lengths to be packaged in any sequence. Height and side adjustments can be made in seconds via a handwheel. Operating principle: The machine operates in cycles, fully automatic, with photoelectric control. Products to be packaged are fed into the machine via a special infeed conveyor and are four-sided sealed. An oil-hydraulic system ensures precise function of the sealing unit. Sealing is done using the impulse/tape-sealing process and can be equipped with additional special sealing elements. With precise, infinitely variable temperature control of the sealing tools, odor emissions are avoided. Working speed: Actual production speed and effective net output depend on the format, type, and arrangement of the products, and can reach up to 1,500 packs per hour. Standard features: - Special take-up device for film waste - Film waste monitor Dsdjy H Dhfjpfx Aipoch - Hydraulically operated sealing pistons - Photoelectric product length control - Continuous endless longitudinal sealing - Impulse sealing with adjustable preheating for separating seam - Cycle-controlled cross sealing - Special designs for precise film and product transport - Infinitely adjustable height and side settings - Broadly designed, adjustable electrical controls for sealing temperature, sealing impulse, sealing time, and film control - Standard safety features The machine complies with VDE and safety regulations. Working width: 170 - 320 mm, infinitely adjustable sideways Product height: max. 80 mm, depending on article, format, film quality, and thickness Power supply: 380 V three-phase, 50 Hz Connection rating: 3 kW Color: hammer-tone paint, light grey Additional equipment: - 1 piece special infeed conveyor built into the machine, height and side adjustable Belt length: 1,500 mm Belt width: 150 mm with stop motor and laterally adjustable guide rails - 1 piece plug-in axle film roll holder Expanding shaft with mechanical clamping device for top and bottom film For smooth film feed, suitable for films from 12 μm thickness Max. roll diameter: 300 mm Min. core inside diameter: 76 mm

Condition: ready for operation (used), Year of construction: 2008, functionality: unexamined, type of input current: three-phase, input voltage: 400 V, input current: 27 A, power: 19 kW (25.83 HP), input frequency: 50 Hz, nominal power: 19 kW (25.83 HP), heating capacity: 18 kW (24.47 HP), Beck Packautomaten HV601 HPLS Year of manufacture: 2008 Pass-through width: 600 mm Pass-through height: 420 mm with pressure rollers at the outfeed Dodey H Ddaepfx Aipoch Transport rods: 15 mm with 19 mm silicone coating Rod pitch (center to center): 38 mm Hood length: 1700 mm Overall length: approx. 2100 mm Conveyor speed: infinitely adjustable Connected load: 19 kW As shown in the photos

Condition: used, Year of construction: 2008, functionality: unexamined, Beck Packautomaten V800 Banding Machine Infeed and outfeed conveyor belt, belt width 700 mm Maximum clearance height 400 mm Frequency inverter controlled Heated sealing stamp, 800 mm wide Maximum film width 800 mm Dodpoy Hmadefx Aipsch With Siemens SP control system and operator panel Year of manufacture: 2008

Condition: used, Year of construction: 1998, Multi-level gluing press Used, good condition, little used Machine will be cleaned, partially overhauled Gas pressure dampers renewed Manufacturer: Beck Model: Kontra 8D Year of construction: 1998 Machine no. 405 CE type-tested Multi-level press with 5 levels Hold-down device per level: 2 with handwheel Counterbearing: 3 pcs per level – pendulum bearing for angled gluing Press beam pneumatically operated Working length approx. 1500 mm Working height/depth: 1050 mm Dodpfx Aey H N Tysipsch Max. material thickness approx. 60 mm Mobile Original price approx. 14,000 EUR Space requirement approx. 1700 x 1500 x 1600 mm Location: 97447 Gerolzhofen, loaded free on truck, unpacked Delivery as-is, as inspected Without warranty or guarantee

Condition: good (used), functionality: fully functional, price starts from 2.800 EUR gluing press 42000 x 450 x 60 mm press Djdpfxog Uk Eio Aipech 15 pieces press cylinder ( Membrane cylinder ) with press stroke per cylinder 70 mm, press force per cylinder 6800 N 16 hold-down devices Loading dimensions L 4.5 x W 1.1 x H 0.5 m Own weight 600 kg Price on request 2 press frames to turn 3 press frames as gluing star 4 press frames

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, Lift table with a built-in chain conveyor. Load capacity 3 tons. Platform size approx. 3200 x1200mm. Technical description : Single scissor lift table type TT3000Bsp. - 3000Kg load - useful stroke 1600mm - Height 350mm - platform approx. 3200 x1200mm - Hydraulic unit drive with 2.2 KW motor - Switch up / down with manual switch Chain conveyor with 3 conveyor chains installed on the lifting table. - Length about 3200mm - Distance of the outer chains is 1100mm. - Drive gear motor SEW 1.1 KW Dsdpfx Aiefhbupopjch - Drive is installed under the lifting platform. - Conveyor chains 3 x 1½ "roller chain German quality - conveyor speed approx. 7m / min - Stable cover plates between the conveyor chains, accessible, closed form. - Electrical switching manually via manual button dead man's switch, with function forwards / backwards. - Construction height about 300mm. Base frame substructure with adjustable feet can therefore be driven under with forklift forks. Overall height: approx. 750 mm 1 pc = Lifting table + chain conveyor + floor frame.

Condition: refurbished (used), - Longitudinal/transverse with manual and automatic control - Pick-up of the Euro pallet in longitudinal and transversal direction - load capacity 1300 kg - Basic dimensions: 1430 mm wide 1670 mm long 1854 mm high Dedpsiyyvhsfx Aipech - Execution: mobile - Stroke: min. height 80mm, max. height 1030mm, stroke 950mm - Color: light gray RAL 7035 complete - power supply: 440 V - 50 Hz 1,5 or 2,2 kW - own weight: 490 kg

Condition: new, Year of construction: 2024, functionality: fully functional, total height: 1,950 mm, construction height: 300 mm, lifting height: 1,650 mm, load capacity: 1,500 kg, overall weight: 450 kg, total length: 2,500 mm, total width: 800 mm, table width: 800 mm, table height: 1,950 mm, table length: 2,500 mm, transport length: 2,500 mm, transport width: 1,200 mm, platform width: 1,200 mm, platform length: 2,500 mm, space requirement length: 2,500 mm, space requirement height: 1,950 mm, space requirement width: 1,200 mm, power: 1.1 kW (1.50 HP), Equipment: documentation/manual, Technical description with the following main data: Load capacity 1500 kg static line load effective stroke 1650 mm Overall height 300 mm Total height 1950 mm Platform length 2500 mm Platform width 1200 mm Material smooth sheet metal Dcsdpfx Aieuhphvspoh Lifting time approx. 35 sec. for the full effective stroke Lowering time load-dependent Electrical connection 3 x 400 V/ 50 Hz + protective earthing, with 16 A CEE plug and 3 meter cable Motor 1.1 kW, 1,400 rpm. Valve voltage 24 V DC Sealing degree IP 54 general, solenoid valve and switch IP 65 Paintwork dust gray RAL 7037 Power unit position integrated in the lift table Control box dead man's control incl. 2 m cable Total weight approx. 450 kg

Condition: new, Year of construction: 2025, - Mobile scissor lift table with sturdy platform upper frame and a bolted-on workbench top - Lifting up/down is operated via a hydraulic foot pump - Load capacity: 350 kg - Base height: 540 mm - Usable lift: 610 mm - Maximum height: 1150 mm - Stable platform upper frame, 970 x 590 mm, located beneath the workbench top - Robust lifting scissor construction with finger guards - Total weight: approx. 160 kg - Steering castors: 2 with brake, 2 without brake - Wheel diameter: 125 mm - Each narrow side features 2 integrated support feet with rotating footplate and rubberized foot surface, allowing the lift table to be used as either a stationary or mobile work station - Powder-coated finish: base frame and platform frame in light grey RAL 7035, scissor elements in violet blue RAL 5000 * Includes widened foot lever for easy operation with the workbench top installed even when the lift table is fully lowered Product data — Workbench: Workbench made of solid beech (50 mm thick), load capacity 200 kg on the workbench Front vice approx. 520 x 70 mm Front and rear vices equipped with spindles ensuring highly precise and stable clamping jaw guidance Rear vice and workbench top equipped with holes for bench dogs Front edge of the workbench top is 130 mm high Dodpfsrr Twmox Aipjch Workbench drawer runs along the entire rear length for tool storage, includes 4 matching round bench dogs Usable top length: 1,490 mm Usable top width: 620 mm Overall length: 1,700 mm Overall width: 790 mm Workbench top thickness: 50 mm Front edge of bench top: 130 mm high Weight of workbench top: approx. 90 kg