Used Ico-Systems Laminator for sale (39,238)

Year of construction: 2008, condition: used, functionality: fully functional, Function : Stage 1 is a heated degreasing and phosphating stage. The stage has an external heat exchanger. Water, to compensate for evaporation and adhesion losses, is supplied from Isdpfx Aezpxwdenyjtk stage 2 through a separate circulation pump. An electronic level controller maintains a constant level of the liquid. Pump types 2 x W80 - 11 kW Total pump capacity 4.300 l/min – 18 MVS/ 22 kW Circulation pump 1 x W35 – 2,2 kW Total pump capacity 380 l/min – 10MVS/ 1,96 kW Heat exchanger gas max. 250 kW Spray pressure 1 – 1,5 bar Stage 2 is an unheated rinsing stage with water supply from stage 3. The water is supplied through a separate circulation pump. The stage has overflow to the drain. Pump type W80 – 11 kW Total pump capacity 2.150 l/min – 18 MVS/ 11 kW Spray pressure 1 – 1,5 bar Stage 3 is an unheated fine rinsing stage with demineralised water from the reverse osmosis plant. The demineralised water is supplied direct from the osmosis plant. An electronic level controller maintains a constant level of the liquid. Pump type W80 – 11 kW Total pump capacity 2.150 l/min – 18 MVS/ 11 kW Spray pressure 1 – 1,5 bar Stage 4 is a final fine osmosis rinse direct from the osmosis plant. The plant has cascade rinse technique with automatic level supervision for reducing the wastewater to a minimum. Maintenance and service friendly construction, all electrical elements are accessible from outside.

Condition: ready for operation (used), Year of construction: 2004, machine/vehicle number: 111302, functionality: fully functional, temperature: -75 °C, total length: 1,300 mm, total width: 1,300 mm, total height: 2,000 mm, usable tank capacity: 100 l, The system was professionally dismantled and decommissioned by the manufacturer. The plates were stacked together. TECHNICAL DETAILS Itodpezrfa Djfx Anyjk Ice condenser volume: 100 l Ice condenser capacity: 12 kg Ice condenser output: 8 g/24 h Ice condenser temperature: −75 °C MACHINE DETAILS Platform dimensions: 350 × 450 mm Platform area: 0.48 m² Platform spacing: 111 mm Refrigerant: Isceon 89 Heat transfer fluid: Syltherm HF Electrical equipment: 400 Volt, 3 phases, 50 Hz Dimensions & Weight Space requirement for freeze-drying system: 1,300 × 1,300 × 2,000 mm Space requirement for additional component: 1,800 × 600 × 2,000 mm Weight: approx. 1,500 kg

Year of construction: 2013, condition: excellent (used), functionality: fully functional, REF: MM6423 Complete weighing and bagging system which has previously been used to pack frozen peas and vegetarian products into pillow packs. This system comprises of the following equipment: 1 x Infeed swan-neck conveyor with flighted belt mounted on mobile frame (stored outside). Date of manufacture - 2013. Belt width - 245mm wide. 1 x Yamato Scale Dataweigh (UK) Ltd ADW-514AWCC 14-head multi-head weigher with dimple pans. Manufacturer - Yamato Scale Co., Ltd. Speed - up to 120 drops/minute (depending on product and weight). Weighing range - up to 1000g. Rated to IP66 (waterproof). 1 x Gantry unit with steps. Footprint dimensions - 5.7m long x 2.7m wide x 2.72m high. 1 x Gainsborough Engineering Ltd GV2K3 vertical form, fill and seal bagging machine. Manufacturer - Gainsborough Engineering Ltd. Date of manufacture - 2013. Sealing jaws: Horizontal - 360mm wide / Vertical - 420mm long. Packing speed - up to 60 packs/minute (depending on bag size). Bag size range: Smallest - 80mm wide x 80mm long / Largest - 320mm wide x 350mm long. Supplied with jaws for poly and laminate film, block-bottom and gusseted bags as well as 3 x forming tubes. Forming tubes: for forming pillow/’fin-seal’ packs measuring 130mm, 220mm and 270mm wide. 1 x Outfeed inclined conveyor. Belt dimensions – 2250mm long x 425mm wide. Outfeed height – 1000mmm. Some spare parts are also included. Videos available on request. Itjdpfey Um T Hsx Anyek

Condition: used, Year of construction: 2007, functionality: fully functional, type of input current: three-phase, Glass laminating oven with vacuum mat (bag oven), manufacturer SIMTECH (Belgium), Flexlam series – Glass Laminating Solutions. Manufacturer: SIMTECH (Belgium) Model: Flexlam Laminating Oven Electrical panel: Alfametal / Dynamics, Project No. 0467 Year of manufacture: December 2007 Power supply: 3 x 400V AC + PE, 50Hz Iodpfx Anjzqmhasystk Network: TN-S, Icc < 10kA Control panel: Allen-Bradley PanelView 300 Micro Controls: Cycle Start/Stop, Vacuum Start, Reset, Emergency Stop Vacuum system: Dedicated vacuum pump, vacuum mat/bag Signaling: Signal tower (End of Cycle / Alarm-Fault / In Process)

Condition: ready for operation (used), functionality: fully functional, tank capacity: 73 l, usable tank capacity: 50 l, total length: 1,200 mm, total width: 1,500 mm, total height: 2,000 mm, Process system for the production of creams, ointments, and suppository masses Design for foaming products The heated container is vacuum-resistant up to -1 bar and pressure-resistant up to 2.4 bar. TECHNICAL DETAILS Temperature range, container interior, max.: 95°C Jacket temperature, max.: 140°C Usable volume: 50 L Total volume: 73 L Minimum filling volume: 10 L Homogenizer Model: Brienz RF 112 M-2 Power: 4 kW Speed: max. 2,850 rpm Itodszrfbbepfx Anyok Mixer/Scraper Gearbox: SEW FAF 37 Speed: max. 28 rpm MACHINE DETAILS Space requirement: 1,200 × 1,500 × 2,000 mm

Year of construction: 2007, condition: excellent (used), functionality: fully functional, Specification 360/N Type Manual Laminator 360/N Application Laminating dry-film photoresist onto PCBs Max. panel width 635 mm Material thickness approx. 0.05 – 12.7 mm Laminating rollers 2, both driven Temperature control Thermoregulators for the laminating rollers Iedpszum Afsfx Anyetk Drive Adjustable transport speed Control PLC Compressed air Required for pneumatic functions Film Dry-film photoresist Design Manual laminator Manufacturer/documentation Duesse / Shipley, Rohm & Haas

Condition: excellent (used), Year of construction: 2019, machine/vehicle number: SO-22949/1/19, REF: MM6218 1 X Sparc Systems 8-lane linear weighing combination system. Technical specification⚙️ ✅ Manufacturer - Sparc Systems Ltd. Ijdpfoxd Thmjx Anyetk ✅ Model - LCWS. ✅ Overall dimensions - 1620mm long x 920mm wide x 1620mm high. Note 🗒️ Seller has a quote for service and getting production-ready at cost of £12-15k per unit.

Year of construction: 2019, condition: like new (used), Automated system to laminate reel of chromotography paper between 2 reels of polyester handle material and on to profile the chromotography paper tip and then cut the web of laminated polyester with chromotography paper into single profiled strips. The Matrix 7100 Laminator was developed to meet the demanding requirements of the lateral flow test strip industry for a moderately priced system capable of supplying the membrane lamination needs of the moderate to high volume production facility. The unit was designed to allow process flexibility while at the same time optimizing product yields and throughput. Numerous options are available allowing the system to support a wide variety of material types, lamination configurations and process variables. The Matrix 7100 allows for continuous lamination of membranes onto a plastic backing web and the cutting of the resultant laminate into discrete cards for further processing on other, downstream equipment. Numerous options provide the utmost in process flexibility at a very low overall cost. The integral touch screen operator interface terminal provides for multiple recipe storage and simple and reliable setup and operation while simplifying process validation. Key Features Touch screen operator interface terminal for simple setup and operation Simple web guide adjustment Rapid changeover to support multiple products Flexible to support changing requirements Base configuration supports Backing Web with Release Liner plus 4 membranes Extruded aluminium structural frame Flying shear for continuous card cutting Reel to reel lamination option Itjdpfx Asya H S Sonyek

Condition: used, Year of construction: 2005, - Automatic infeed table - KFA unit - Return system Used single-sided edge banding machine Manufacturer: IMA Type: Combima Systems / I/R751220/R3 1 single-sided combination machine for trimming, edge gluing and edge finishing of panel-shaped workpieces made of wood and/or wood-based materials. - Automatic infeed table - KFA unit - Return system Technical data "Workpiece": Workpiece length - min.: 238 mm - max.: 2350 mm Workpiece width - min.: 142 mm - max.: 800 mm Workpiece thickness: - min.: 8 - 40 mm Technical data "Strip" (only for longitudinal processing): Roll material: - Paper edge bands & plastic edge bands: 0.3 - 3.0 mm - Veneer edge bands: 0.5 - 3.0 mm Edge height: - min.: 14 mm - max.: 45 mm Technical data "Machine": Variable workpiece overhang from the chain conveyor (including edge with edge thickness 0.3-3 mm): - min.: 40 mm - max.: 80 mm - PC control ICOS open - Feed speed v=5-25 m/min, frequency-controlled drive - Inclined roller table as infeed section NC infeed system for front and carcass parts - for length and width-independent automatic workpiece feed in single-sided edge processing machines. Itedezuyplepfx Anyjk Only for the production of strip material in the 2nd pass - An additional stop rail, adjustable via NC axis. Double milling unit 08.376: - Controllable - Motor 1 operating in the same direction and motor 2 operating in the opposite direction - Reserve space on the unit carrier for a double trimming unit with electrical pre-installation for 2 x 6.6 kW. - Heater 300 lg, 2x1.5 kW, for preheating the workpiece edge. - Gluing unit 04.1570 system for straight edges and adhesive application to the workpiece. The edge thickness depends on the magazine used and is max. 3 mm. - Adhesive application for workpiece thickness max. 50 mm - 2 pre-melting tanks for PU adhesive - 12-position edge magazine for roll material 0.3-3 mm thick. (8 slots up to 3 mm, 4 slots up to 1.3 mm) Vertical roll holder for 12 rolls: - max. roll diameter 850 mm - max. edge height 45 mm - Trimming unit 08.42, for 2 motors mounted on the upper pressure bar - Pre-milling and milling unit with height sensor - with 1 motor 1000 W - Multi-profile / chamfer unit, with 2 motors 1000 W - Contour milling unit KFA 30 - Multi-profile drawing blade unit - Flat drawing blade 08.517 - Copy edging unit 08.604 - Edging unit 08.617-2 - Double milling stand 75.184, 1050 mm high, both stand sides can be used - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 6000 rpm - Milling / profile milling / grooving unit 75.34 with 1 motor, without tool, 100 Hz, 600 rpm - Motor spindle for the use of the Hydro-Format tool system - Return system, manufacturer Meinert Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: excellent (used), Lasermax LX550 Roll Feed System with LX581 Module Roll-fed digital print finishing system Designed for continuous-feed digital printing applications Automatic web feeding and tension control Integrated touchscreen control High-volume production capability Suitable for transactional, direct mail and book production workflows Modular system design Made in Sweden Technical Data LX550 Power supply: 230 V, 1-phase, 50 Hz Power consumption: 1800 W Rated current: 10 A LX581 Power supply: 200–240 V, 1-phase, 50/60 Hz Itjdpfx Ajzaq Rfjnyjk Power consumption: 1200 W Rated current: 10 A Circuit breaker: 15 A Machine Information LX550 Serial No: 09LX550034 LX581 Serial No: 09LX581002

Condition: good (used), D&K Europa System B2 Laminator Ijdpfxszhkhxe Anyotk The machine is 100% operational and ready to use. This advanced, high-performance machine is ideal for commercial laminating. Technical specifications: Max sheet size: 540mm x 740mm Min sheet size: 210mm x 220mm Min weight: 115 gsm Max weight: 400 gsm Operating temperature: 80-145°C Weight: 750 kg 380V power supply Chrome-plated steel cylinder Pneumatic clamping, separation, and automatic high-stack feeding. Sheet feeding accuracy: ±2.0mm. Touchpad for easy operation. Sheet straightening module. Sheet discharge jogger.

Condition: excellent (used), type of input current: AC, input voltage: 230 V, Equipment: compressor, MATRIX MX 530 DP, double-sided thermal laminator, with foiling attachment. Complete with continuous feeder, touch screen controls, miss feed detector, air operated laminating pressure, auto sheet separation drop sheet delivery. It is a pneumatic model with a built-in compressor for high-quality lamination of digital print. Complete with the gilding attachment and second feed roller for double-side laminating. This machine is in good condition, just serviced and ready for work. We can arrange export packing and transportation. (quotation on request) Our price includes packing on a pallet and loading onto your transport. Payment in GBP in full before loading. Preferred payment method, bank transfer. Please do not hesitate to ask if you need further information. Specifications: Max sheet size 510 x 640mm Min sheet size 200 x 300mm, Max speed 10m/min Isdpfxor Ddu Is Anyotk Film unwind shaft 75mm dia Temperature range 80-140 deg C Electrically heated laminating roller Electrical supply 220-240V, 50 Hz, 1 ph, 10A Machine weight 260kgs Machine size 1868L v 910W x1 285mmH

Condition: used, machine/vehicle number: 007668, Max. panel width: 1200 mm Isdpsu Huwcefx Anyjtk Max. panel length: 2400 mm Movement system: suction cups.

Condition: used, Year of construction: 2005, Single-sided edge banding machine Manufacturer: IMA Type: Novimat Systems/I/R75/1000 Year of manufacture: 2005 Technical data PC control - ICOS OPEN control system Feed rate 5-25 m/min, frequency-controlled Fence with electronic positioning control Adhesive application above and below Iedpfx Anezuyhnsyetk Trimming unit with 2 motors, each 4.5 kW, 9,000 rpm, controllable. - Horizontally adjustable via axis Heating element approx. 300 mm long, 2x 1.5 kW Gluing unit - Adhesive application with pneumatic quick-lock system. - Automatic PU melting system Quickmelt for 2 kg cartridges - 32-position edge magazine (8 slots up to 3 mm / 24 slots up to 1.3 mm) Vertical roller holder for 32 rollers, max. diameter 850 mm Cutting unit on the upper pressure roller with 2 motors, each 200 W, 400 V, 12000 rpm. - Horizontal pneumatic swiveling 0-25 - With controllable side contact, for 3 edge thicknesses Trimming unit with 2 motors, each 1000 W, 400 V, 200 Hz, 12000 rpm. - Operating in counter-rotation. Multi-processing unit 08.348 - For chamfering or radius trimming of the upper and lower longitudinal edges, as well as for copying the front and rear workpiece edges. - Program-controlled adjustment for up to 4 profiles - 2 motors, each 660 W, 400 V, 200 Hz, 12000 rpm. Spray nozzles above and below for applying cleaning agents Multi-profile scraper unit - With stepper motor axes for horizontal and vertical positioning. - For 4 profiles. Straight scraper unit - With electro-pneumatic retraction device Copying edge smoothing unit - With 4 smoothing motors, each 250 W - Smoothing unit with 2 lower and 2 upper motors, each 180 W, 50 Hz, 1400 rpm. Smoothing unit - For smoothing and eliminating the white haze on the trimmed PVC/ABS edges - With an upper and lower smoothing zone With workpiece return system LGIMATECH ZHR 05/L/145 - Air cushion table, inclined, 2 return belts with brushing devices from below. Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Year of construction: 2013, condition: used, functionality: fully functional, Equipment: CE marking, "Dual drying system with compressed air expansion + molecular sieve treatment - Weekly timer - Anti-stress system Ijdjzlxq Njpfx Anystk - Compressed air flow rate: 7 - 20 Nm3/h - Maximum temperature: 180 °C - Dew point: -50 °C - Total power: 1 kW - Power supply: 230 V - 50 Hz - Hopper capacity: 50 dm3 - Compressed air pressure: 6-8 bar - Weight: 23 kg"

Condition: used, machine/vehicle number: 007669, Max. panel width: 1200 mm Max. panel length: 2400 mm Movement system: collet Iedpfx Aju Huv Sjnyjtk

Condition: used, For sale is a 3D Systems ProX 500 SLS system, including a post-processing station with powder feed, extraction system, nitrogen generator, and extensive peripherals. The system has been regularly maintained and operated continuously under an Elite Service Plan (full maintenance contract). SLS system: Itedjzuau Ijpfx Anyjk - 3D Systems ProX 500 (build volume: 381 × 330 × 457 mm) - MQC (post-processing station and automatic powder feed) - Donaldson extraction system - Nitrogen generator Extensive peripherals: - Festo ATEX vacuum cleaner - 2x blasting cabinets - Scissor lift table cart Condition & Service: - Year of manufacture: 2014 - Regularly maintained - Operated continuously under Elite Service Plan - Full maintenance contract covering the entire operating period - Well-maintained and technically serviced system The system is ideal for companies that want to take over a complete SLS production solution, including powder handling and the necessary peripherals. Preferably sold as a complete package. If you are interested, we will gladly provide further information, photos, and the available technical documentation.

Condition: excellent (used), Year of construction: 2002, Complete system with support/transport table with edge delamination and storage rack for laminated safety glass. Automatic glass stop and glass-rotating device. Itsdpfx Anoxap Axoyjk

Year of construction: 2016, condition: like new (used), functionality: fully functional, BÖHL JUNIOR S 450 VA fully automatic packaging machine / wrapping machine for spirally wrapping long goods with packaging material (typically stretch film) Product dimensions • Width: 15 – 220 mm • Height: 15 – 120 mm • Length: approx. 600* / 800 mm to 6,000 mm Iedpfx Anszn Ipyjystk • Weight: approx. max. 3,000 kg / 6 meters including carriage - maximum cross-sectional diagonal of the product: 220 mm (customer-specific) Note: max. weight only possible if transferred with a powered, in-house conveyor system. (A) 600 mm* without carriage (B) 800 mm with carriage or distance between carriages min. 600 mm Packaging materials • PE stretch film, thickness approx. 17 – 50 μm (recommended 23 μm) • Roll diameter max. 400 mm • Roll width max. 125 mm • Core diameter 76 mm Specifications • Wrapping ring D = 450 mm inner diameter • Speed max. 20 m/min. (frequency-controlled) Technical data • PLC control Siemens S7 with touch panel • Control voltage 24 V DC • Connection voltage 3 x 400 V – 50 Hz • Power consumption approx. 7 kW • Pre-fuse 35 A • Noise level 75 db (A) • Operating pressure 6 bar • Air consumption approx. 20 standard liters per cycle Technical section • Packaging material feed and mechanical pre-stretch system for 125 mm • Automatic clean-cut cutting unit for the packaging material • Electromotoric height adjustment of the wrapping ring • Automatic height detection of the product via light barriers • Packaging material tear and end detection • Pneumatic pressure rollers on the infeed and outfeed sides • Powered transport rollers on the infeed and outfeed sides in the machine • Quick-change device for packaging material rolls • Manually adjustable side guide plates as side centering in the infeed • SIEMENS frequency inverters for wrapping ring drive and feed • Complete electrical control, SIEMENS PLC S7 with touch panel • 2 m powered conveyor system with PU-coated rollers in the infeed area • 2 m powered conveyor system with PU-coated rollers in the outfeed area Packaging program - the following packaging programs are included: Wrapping - the product is wrapped along its entire length. Multiple layers are wrapped at the beginning and end of the product (edge protection). The overlap of the film during wrapping can be adjusted using a frequency inverter. Wrapping with intermediate bandages - the bundling points are activated by means of a timer. The product is wrapped along its entire length. Multiple layers are wrapped at the beginning and end of the product. In addition, stability bandages are wrapped. The transport is stopped after adjustable distances, and layers are wrapped in place for an adjustable time. The overlap of the film during wrapping can be adjusted using a frequency inverter. This program may eliminate the need for strapping bands in some cases. Bundling - the bundling points are activated by means of a timer. The product is not wrapped along its entire length. Film bandages are wrapped, and the number of layers per bundling point is adjustable. The distance between the bundling points can be preset via the timer. Continuous transport without wrapping Machine dimensions (without safety fence): • Length: 1,930 mm • Width: 1,500 mm • Height: 2,200 mm • Conveyor height: 900 mm • Machine weight approx. 1,600 kg Operating side: on the right in the direction of transport Paint: machine RAL 7032, gray The system is in VERY GOOD technical and optical condition.

Year of construction: 2016, condition: good (used), functionality: fully functional, Storage System Itjdpfx Aexdtv Rsnyek Machine Designation Vacuum Stacking Device Machine Number: 150.138 Type: VS 16 Length of Carrier Track (Travel Path): 28.5 m Bridge Span (Travel Path): 16 m Overall Height: 3600 mm Clearance Height: 2700 mm Maximum Stacking Height (incl. supports): 2000 mm Stack Gap: 100 mm Positioning Accuracy: ±5 mm Support Height: 60 mm Input Stack Height: 1900 mm Length Adjustment Vacuum Load Handling Length: 2000 – 4200 mm Vacuum Suction Capacity: 2 x 40 m³/h Table: Panel Sizes for laminated chipboard, laminated MDF boards, laminated HDF boards, solid wood and composite panels, blockboards, honeycomb panels Length: 1250 - 4100 mm Width: 330 - 2100 mm Thickness: 4 - 100 mm

Year of construction: 2015, condition: excellent (used), Microglass FLY 600 Glass Lamination Furnace – a professional machine for the production of laminated glass. For sale is a professional Microglass FLY 600 lamination furnace designed for the production of laminated glass using the vacuum method. The machine is ideally suited for glassworks producing safety glass (VSG), decorative glass, glass with EVA film, and for drying coatings. The unit is equipped with a modern heating system based on infrared (IR) emitters and forced hot air circulation, which ensures uniform temperature and high lamination quality. (mitindustrial.it) Technical specifications: ● Model: FLY 600 ● Manufacturer: Microglass / MIT ● Application: glass lamination, drying of paints/coatings ● Working area: ● 1 platform 1800 × 3200 mm ● Working chamber height: 600 mm ● Number of working drawers: 1 ● External machine dimensions (closed): ● approx. 2450 × 4230 × 1350 mm ● Length with open drawers: approx. 8500 mm ● Machine weight: approx. 3100 kg ● Installed power: 45 kW ● Power supply: 400 V, 3 phases, 50 Hz ● Average energy consumption per standard cycle: approx. 27 kWh ● Lamination temperature: 130°C ● Drying temperature: 150°C ● Vacuum pump: ● two-stage ● power approx. 1.5 kW ● Control: ● touch panel ● digital vacuum gauge ● Programs: ● up to 256 programmable recipes ● possibility to set time cycles ● Heating system: ● tubular IR emitters ● hot air circulation ● Forced cooling: YES ● High-strength silicone membrane ● PTFE mesh to improve vacuum parameters ● Possibility to use an additional drawer to increase productivity (mitindustrial.it) Machine advantages: ✔ large production format ✔ high lamination quality without air bubbles ✔ economical operation for serial and single production ✔ intuitive operation via touch screen ✔ solid industrial construction ✔ ideal for VSG, decorative glass, and custom projects Itodpfxezga H Io Anyek The machine is ready for operation. An excellent solution for professional glassworks looking for an efficient lamination furnace.

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, type of input current: three-phase, working width: 760 mm, Mamy przyjemność zaoferować Państwu profesjonalny laminator termiczny ECOSYSTEM COMPACT 76, idealny do zastosowań przemysłowych w zakresie uszlachetniania druku. Urządzenie zostało zaprojektowane z myślą o wysokiej wydajności, niezawodności i precyzji laminacji różnorodnych materiałów. Itsdpfx Aneypd Szjyok DANE TECHNICZNE • Maks. format arkusza (szer. x dł.): 760 x 1060 mm • Minimalny format arkusza: 210 x 250 mm • Maks. prędkość mechaniczna: 60 m/min* • Wydajność podajnika: do 10 000 arkuszy/godz.* • Gramatura papieru: 115 – 600 g/m² • Maks. szerokość folii: 750 mm • Średnica rolki z folią (maks.): 350 mm • Średnica wewnętrzna rolki z folią: 3” • Wysokość robocza (z paletą): 900 mm • Maks. waga stosu (z paletą): 750 kg *Wydajność zależna od materiałów i doświadczenia operatora. ZASILANIE I INSTALACJE TECHNICZNE • Zasilanie: 400 V, 3-fazowe + PE, 50 Hz • Moc zainstalowana: 31 kW • Sprężone powietrze: 700–900 nl/min przy 8 bar (Sprężarka nie wchodzi w zakres dostawy.) ZESTAW ZAWIERA • Automatyczny podajnik z elektronicznie sterowanym stołem ssącym (system PIAB) • Odwijak folii z przycinaniem bezpośrednim • Zespół laminujący z chromowanym kalandrem i gumowym wałkiem dociskowym • Zewnętrzny podgrzewacz wody z armaturą i zaworami • Grupa separacyjna z systemem nacinania folii • Gorący nóż z laserem korekcyjnym Scatec – do cięcia folii metalizowanych PET, nylonowych, tłoczonych i specjalnych. Opis funkcji: System gorącego noża umożliwia precyzyjne i czyste oddzielenie folii od krawędzi arkusza po laminacji, niezależnie od rodzaju materiału. Zintegrowany laser korekcyjny Scatec odpowiada za bieżącą kontrolę położenia arkusza oraz automatyczne dostosowanie pozycji cięcia, co zapewnia idealne wyrównanie folii względem krawędzi druku. To rozwiązanie minimalizuje błędy i zwiększa powtarzalność procesu, nawet przy dużych prędkościach produkcyjnych. • Automatyczna sztaplarka • Panel dotykowy sterowania • System zdalnej pomocy (Ethernet – po stronie klienta) • Instrukcja obsługi zgodna z normami CE • Zapasowa rolka dociskowa z łożyskami i specjalnym wózkiem

Condition: ready for operation (used), Year of construction: 2016, A complete Hymmen laminating line for the woodworking industry is available. Main components: Transport modules (stacking roller conveyors, lifting units, gantries and platforms), surface cleaning machines, roller glue application machines, various calenders, cutting stations, press roller, film unwinding station, sawing machine, X-ray sensor system and a stack turner for double-sided coating. Nominal width: 2200mm, product width: 2200mm, line working height range: 1170mm-1270mm, line speed: 10m-30m/min, max. product speed: 25m/min, passage height: 80mm, min. panel length: 1300mm, min. panel width: 1200mm, product material: sandwich material, tolerance: +/-3mm, total line space requirement: 2 halls (590m²/347m²). Documentation available. On-site inspection is possible. This is a complete production line with peripheral equipment, pre- and post-processing stations and conveyor belts in between. The entire line has been dismantled and stored. Videos on request. Itodpfx Anowzx Tfoysk

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, machine/vehicle number: X7QP000006, paper width (max.): 1,620 mm, Epson SureColor SC-R5010L wide-format resin inkjet printer in good working condition, available for immediate sale. Key Details (from machine label & display): Model: SC-R5010L / K391A Serial No.: X7QP000006 Power: 200–240V / 50–60Hz (European spec, CE certified) Operation Report (as shown on screen): Total Print Area: 38,231.59 m² Total Media Feed Length: 33,162.7 m Total Carriage Pass: 4,060,051 Printer Features: UltraChrome RS resin ink system (6 colours + Optimizer + Maintenance Liquid) Dual bulk ink unit (2 × 1.5L pouches with hot-swap function) PrecisionCore Micro TFP printhead 64" (162 cm) print width Odourless, water-based resin ink – suitable for vinyl, banner, textile, canvas, wallpaper, film Immediate lamination capability LCD touchscreen control panel Nozzle check printed on date of listing (11.03.2026) – all colour channels firing Included: Printer main unit with bulk ink system Auto take-up reel system All ink channels present Iodpfx Anjytrfdsystk Extra inks that we have in-house The printer is located on a pallet. Inspection welcome. Suitable for signage, wide-format print shops, wallpaper and production environments.

Condition: used, functionality: fully functional, Type: Automatic sheet-to-sheet laminating machine Manufacturer: Lamina system AB, Sweden Model: Laminating 1420 FA Technical Specifications Max. sheet size: Width 1420 mm Min. sheet size: Width 200 mm /Length 350 mm Top sheet: 130 - 450 gm/m2, 1 pts = 28.25 g/m2 Bottom sheet: from 250 gm/m2 Thickness: 0.6 - 10mm (0,016 - 0,39*) Glue: PVA type or as specified Feeder height: Top: 500 mm Bottom: 800 mm Registration accuracy:* < +/- 0.50 mm Operating speed:* Up to 3000 sheets/hour Itodexnzmfopfx Anysk Total installed power: 4.0 kW Electrics: 400 V, 3-Phase, neutral, 50/60 Air requirements: 6 bar; 0.6 MPa or 80 psi Approximately 500 lpm* Oil- and water free air