Used Igus Energy Chain for sale (4,504)

Condition: used, Year of construction: 2019, Second-hand machine Year of manufacture: 2019 Only 110 operating hours! Features and technical specifications: Machining paths: - X = 1800 mm - Y = 900 mm - Z = 80 mm Made from 18 mm Koskisen boards Milling bed made from 19 mm MDF as a sacrificial plate with guide rails and slot blocks, used as a clamping method. Base frame with bracing, cast in polymer concrete, prepared for transport by pallet truck or forklift. Mechanical kit comprising profile guides including guide carriages, as well as ball screws 2010 and 1605 for all axes. Shaft couplings and high-performance grease for lubricating the individual carriages, as well as energy chains including connection sets. Control kit comprising a Triple Beast for controlling 3 axes, with an Ethernet connection. Nwsdjzk Npgspfx Agrsl Leadshine driver board for the fourth motor. Four stepper motors, 5.0 A, 3 Nm, with motor cables, plus a switching power supply rated at 48 V, 6.7 A, LED board for breakout board, ribbon cable and proximity sensors, small parts such as wires, wire end ferrules, control cable, heat-shrink tubing and cable lugs. Fully installed in an aluminium housing, including electrical kit and emergency stop. - 21.5-inch monitor as a built-in display, including a mini PC with Windows 7, Rhino 5.0 CAD software, Estlcam G-code generator, Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic console. Tool length sensor for determining the length and adjusting the active zero-point offset. Optional extras: - High-frequency spindle with 2.2 kW, including union nut, frequency converter, mains filter, braking resistor and collet set. - PC with 8 GB RAM and AMD processor - Rhino 5.0 CAD software for creating both simple 2D data and 3D solid models Availability: at short notice Storage location: Flörsheim

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, working width: 1,350 mm, grinding width: 1,350 mm, overall weight: 4,600 kg, grinding height: 160 mm, height adjustment type: electric, grinding belt length: 2,620 mm, workpiece height (max.): 160 mm, grinding belt width: 1,400 mm, workpiece width (max.): 1,350 mm, Heesemann HSM.3 multi-purpose surface grinding machine with crosshead unit, calibration unit, and DB-S unit. Nedjztafwjpfx Agrowl An all-rounder in a compact space. Calibrating, veneer and lacquer sanding, texturing, polishing, sanding fillers, edge rounding, ... - Automatic workpiece thickness measurement - Adjustable vacuum, integrated into the machine body - Height adjustment not via a chain drive, but via direct drive - Non-driven rollers at the infeed and outfeed (2 each) - Industrial PC 15.6", terminal on the front left - Program memory for up to 1000 programs - Feed rate 3 - 15 m/min - MMI package - Program for remote maintenance - Program for dust extraction flap control - Cross-sanding unit, 15 kW, stepless sanding belt speed, for veneer sanding (longitudinal and transverse), lacquer sanding, saw-rough effect, with sanding belt cleaning, pressure bar with computer-controlled selective pressure control system CSD - Longitudinal sanding unit with pressure lamella belt and calibration function, 15 kW, stepless sanding belt speed, calibrating, fine sanding, and lacquer sanding, with sanding belt cleaning, pressure bar with computer-controlled selective pressure control system CSD - Rotating disc brush unit DB-S, for fine sanding, lacquer sanding, edge rounding, sanding fillers, polishing, texturing - Uninterruptible power supply - Energy Management System EMS - Ionization bar from above - Workpiece extraction system with individually controllable, rotating compressed air nozzles, inside the machine frame, conveyor belt cleaning program - LED lighting in the machine - and much more The machine is available in our showroom for demonstrations. Inspections and trial runs can be arranged by appointment.

Condition: excellent (used), functionality: fully functional, total height: 500 mm, total width: 300 mm, total length: 5,500 mm, overall weight: 2,200 kg, Granite Beam (Öelze) Nedpfxjr Ellre Agrjwl - Dimensions 5500 x 300 x 500mm - Quality class 00 flatness = 11µm (2µm/1000mm) - measuring protocol on demand - incl T-slot on rear side, energy chain on the front side - with granit feet (working height appx. 850mm) incl. air bearing sliders for measurement of straightness and so on. Incl digital readout (2x)

Condition: used, mileage: 111,211 km, power: 90 kW (122.37 HP), Technical Specifications ID: 01242719 Manufacturer: Renault Model: Maxity Version: 120DXI First registration: 04-2019 Power: 90 kW (122 HP) Nwjdpfx Agexlqlxorol Displacement: 2,488 cm³ Fuel: Diesel Color: White Number of axles: 2 Suspension: Leaf spring Tires: 195/70R15 Transmission: Manual Gross weight: 3,500 kg Mileage: 111,211 km Special Features - ABS - Radio CD - Electric windows - On-board computer - Central locking with remote control - Cruise control - Differential lock - Telephone/CB radio - Storage box - 90 L fuel tank Body Aerial work platform VT-48-NE 16m 250kg - 4 x A-frame outriggers - Telescopic boom with dual extension by hydraulic cylinder and articulating basket arm (135°) - Internal energy chain - Two-person GRP work basket 1350 x 780 x 1150 mm - Automatic basket leveling via hydraulic cylinder + parallelogram linkage on the basket arm - Overload sensor - 2 x 60° basket rotation electrically - Rear platform with aluminum chequer plate - One-hand joystick proportional control for hydraulic movements in the work basket - Dual controls on the vehicle with 5m extension cable - Engine start/stop from the work basket - Outrigger control from the driver’s cabin - Flashing beacons - Emergency hand pump - Working height: 16m - Lateral outreach: 7m - Operation possible without running diesel engine thanks to battery - Sine wave power inverter All functions of the lift are fully operational and have been inspected by our workshop. The vehicle is ready for registration. German documents, TÜV and UVV certificates are included free of charge. Additional equipment such as a tow bar, lighting, shelving and more are available upon request. ACR-Juretzki Nutzfahrzeughandels GmbH – Your reliable partner for used commercial vehicles All vehicles offered by us are the property of ACR-Juretzki Nutzfahrzeughandels GmbH. The presentation is made exclusively with original photos taken directly at our premises, ensuring full transparency regarding the actual condition of the vehicle. Our vehicles undergo thorough reconditioning in our own specialist workshop prior to sale – including mechanics, bodywork and paintwork. This means they are optimally prepared for the next technical inspection. We also guarantee the authenticity of the stated mileage. Trust is good – control is better: On request, the vehicle can be inspected by independent testing organizations such as TÜV, DEKRA or KÜS – also as part of a remote inspection. Our service offer for you: - Delivery of your vehicle to your desired location - Complete handling of export formalities, including export plates - Individual financing and leasing offers - Trade-in of your current vehicle - Installation of custom equipment as requested For technical details, further photos, or a personal consultation, we are at your disposal at any time. All prices quoted are net prices. The contents of our website have been created with the greatest care and are regularly updated. Nevertheless, they are intended solely for general information and do not replace individual advice. Only the details in the purchase contract are binding. Subject to changes, errors, misprints and prior sale.

Condition: new, Year of construction: 2002, MKF Motorized Adjustable Spreader Beam Adjustable spreader beams are used when attachment points and load centers of gravity vary. Features & Highlights: Central suspension point: Solid triangular lifting eye for the crane hook. Electric center-of-gravity adjustment: Electric motor drive (connection via 230V CEE plug) to balance uneven loads directly at the push of a button. Ergonomic control panel: Height-adjustable control unit mounted on a vertical rail guide with a drag chain (energy chain) to protect the cables. Clear controls: Controls for locking pins (Open / Closed / Invalid Position) and center-of-gravity adjustment (incl. LED indicator for the center position), plus a central emergency stop switch. Includes transport frame: Robust, mobile base frame made of square steel tubing for safe and compliant storage. Technical Data Manufacturer: MKF Helmut Möschl GmbH Load capacity: 9,000 kg Dead weight: 550 kg Year of manufacture: 11/2002 Serial number: R 6906 Type: 743 4954 13 Beam dimensions: 1920 x 400 mm Frame dimensions: 2670 x 1250 x 1880 mm Nwjdpfx Agozwmckorol Original price: €10,700 "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—new and used—in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Year of construction: 1982, functionality: unexamined, length of welding knife: 560 mm, passage height: 230 mm, passage width: 430 mm, Equipment: documentation/manual, KALLFASS Compact Shrink Wrapper KC 5040/450 - Used unit, year of manufacture 1982 Description: Nedoy H Evdjpfx Agrowl Easy-to-use L-sealer combined with a shrink tunnel. Exceptionally robust design for industrial use. Sealing frame dimensions: 500 x 400 mm. Proven impulse sealing technology with PTFE-coated sealing wire for absolutely odorless operation. Performance up to approx. 20 cycles/min. Sealing frame can be closed manually with minimal effort. Equipped with a closure mechanism featuring an automatic pressure system for precise compliance with set sealing times and reliable separation, even for thicker films. Product transfer conveyor for automatic feed of sealed packages into the shrink tunnel. Suitable for all standard centerfold shrink films from approx. 12 - 80 µm, e.g. polyethylene or polyolefin films. Standard basic equipment: • Film roll holder for setting film reels • Feed table complete with film separator bar and separator sheet • Air support plate for automatic opening of the centerfold film • Film hold-down plates on the sealing frame • Base heating for the sealing wires to increase packing performance • Automatic product transfer conveyor into the shrink tunnel, height adjustable for seal placement at half product height • 1 transition roller at the tunnel entrance • Adjustable rod-chain transport through the shrink tunnel • Silicone-coated conveyor rods, rod spacing 25 mm, rod diameter 12 mm • Energy-saving 2-stage heating • Highly effective thermal insulation on the tunnel hood for energy saving • Infinitely adjustable tunnel blower power • Temperature control via electronic thermostat • Adjustable tunnel passage height • Adjustable working height • Machine mounted on castors for mobile use Included additional equipment: • Automatic product transport into the shrink tunnel • 300 mm cooling station with ball-bearing aluminium rollers at tunnel exit • Special cooling fan at top of tunnel exit Technical specifications: Sealing frame dimensions: 500 x 400 mm Film: Centerfold film, approx. 12 - 80 µm Max. outer diameter of film rolls: 300 mm Film core diameter approx.: 76 mm Max. film roll width: 550 mm Adjustable working height: 870 - 970 mm Tunnel passage width: 450 mm Adjustable tunnel passage height: 100 - 400 mm Heated tunnel hood length: 900 mm Product transport: Rod-chain conveyor Variable conveyor speed: 2.5 - 12 m/min Drive: AC gear motor 0.25 kW Temperature control: Electronic thermostat Heater blower output: Infinitely adjustable Electrical connection: 400 V 3-phase, 50 Hz, with protective earth Installed heating power, 2-stage switchable: 4.5 + 1.5 kW (continuous operation consumption approx. 40%) Nominal power: 8.5 kW Nominal current: 12.3 A Control cabinet and operator side: Left, in working direction Paint finish: Kallfass green, similar to RAL 6011 Dimensions: L = 2,500 mm x W = 1,050 mm

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2024, DIVISIO 3100 - Inline - Returned from leasing due to factory closure! New price in 2024: €149,000.00 net! 42,680 circuit boards have been milled. - Milling cutter diameter control - DIVISIO wear parts package - Automatic transport width adjustment - SMEMA transport height - Separation module for shank milling cutter, 500W Nodpozpytasfx Agrowl - Camera hardware module - Camera teach function software module - Fiducial mark recognition software module - 8-position tool changer extension - Manual extraction hose - Suction power monitoring - ASYCAM CAD data conversion - A Adrep - Offset main switch - ESD energy chains and P-hoses, standard - Packaging size, Group 3 pallet The dismantling order will only be placed after payment has been received. After that, the machine will have the packaging dimensions as specified by the manufacturer, approximately: No guarantee or warranty approx. 1850 kg and 125x200x190 cm, pallet • The height and weight of the asset must be taken into account when selecting the transport vehicle. • A forklift is available for loading. • If the asset is not collected on time, a storage fee of €20.00 per lot and day (or part thereof) will be charged. This fee must be paid before collection. • The sale is made with the exclusion of any guarantee or warranty. • The specifications are technical data from the original offer. • No liability is accepted for printing or measurement errors. If in doubt, please compare the information with the provided photos or inspect the goods on site before the auction ends.

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, controller manufacturer: KIMLA, laser type: fiber laser, laser source manufacturer: IPG, laser power: 6,000 W, sheet thickness (max.): 25 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 14 mm, sheet thickness aluminum (max.): 12 mm, sheet thickness brass (max.): 12 mm, sheet thickness copper (max.): 12 mm, table length: 3,100 mm, table width: 1,600 mm, working length: 3,100 mm, working width: 1,600 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,600 mm, travel distance Z-axis: 120 mm, cutting speed: 10,800 mm/min, type of cooling: water, overall weight: 10,000 kg, total length: 8,200 mm, total width: 2,800 mm, total height: 2,400 mm, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, * Dual automatic shuttle tables ensure continuous operation: while cutting on one pallet, the operator can load or unload the other. * Beam-shaping module for adjusting the laser beam profile. * The optical delivery fibre includes a safety circuit preventing operation with a damaged fibre or connector. * Automatic oxygen/nitrogen assist gas distribution with pressure control, low-pressure protection and real-time adjustment. * Compressed-air cutting capability. * Automatic cutting head height control with collision protection and nozzle height calibration. * Automatic sheet position detection aligns the toolpath with the sheet and supports automated loading. * X- and Y-axis linear motors with a 20 kHz control loop provide high dynamics on complex contours. * Dual-sided linear motor gantry drive enables high acceleration without loss of geometric accuracy. Nedpfx Agozu Nm Horswl * Renishaw absolute position measurement ensures precise positioning, straight cut edges and gantry skew correction. * Monolithic, FEM-optimised frame with composite-concrete-filled chambers; no special foundations or anchoring required. * Linear guide and actuator mounting surfaces are machined in a single setup for high rigidity and accuracy. * Automatically locked front doors with laser-protection windows and protective glazing. * Integrated cooling unit with digital temperature stabilisation. * Steel slat-bed pallets with precision mechanical locking. * Servo-controlled chain-driven pallet changer; table changeover speed: 1 m/s. * Automatic diagnostics, diagnostic reports and free remote internet diagnostics after warranty. * Common DC Bus technology recovers braking energy and reduces power consumption. * Integrated CAD, CAM, CNC nesting and control software with DXF/DWG editing, process selection and toolpath generation. * Software can be installed on additional workstations for offline cutting-plan preparation. * Ethernet connectivity enables integration with IT and production systems. * Parts, sheets and reusable remnants libraries support nesting on partially used sheets. * Project-specific process parameters can be adjusted without changing subsystem settings. * Automatic trim-cut generation for partially used sheets. * Multifunction control panel with keyboard, mouse, USB and gas-pressure controls. * Patented Dynamic Vector Analysis with real-time Ethernet drive communication. * Zoned fume extraction, pulse-cleaned dust collector and laser safety barriers around the pallet exchange area. * PC-CAM imports DXF/DWG files and automatically generates G-code, allowing job preparation at the machine. * Dynamic Vector Analysis maintains high speed on complex contours and shortens cutting times. * High-power-density linear motors provide high acceleration and dynamics. * The compact monolithic frame is welded and machined in a single setup for high rigidity and geometric accuracy. * The electrical cabinet is mounted above the machine, reducing its footprint. Side doors provide easy access to the cutting table.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations Nwodpfefz U S Eox Agrel The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: ready for operation (used), Year of construction: 2025, number of axes: 7, This 7-axis FRONIUS TransSteel 4000 Pulse Welding Cell was manufactured in 2025. It features advanced Steel Transfer Technology and Pulse MIG/MAG capabilities. The system includes a Universal Robots UR10e cobot, a Siegmund welding table, and a Fumator Minivac 200D extraction unit. If you are looking to get high-quality welding capabilities, consider the FRONIUS TransSteel 4000 Pulse Welding Cell we have for sale. Contact us for further details. Nwjdpfx Aozic Eljgrsl - Technology: Steel Transfer Technology / Pulse MIG/MAG- Cobot / Robot Brand: Universal Robots- Cobot / Robot Model: UR10e- Cobot Year of Manufacture: 2025- Welding Table Brand: Siegmund (Extreme 8.7 series, perforated grid pattern)- Extraction Unit Brand/Model: Fumator Absaugtechnik / Minivac 200D- Extraction Unit Controls: Start, Stop, Filter Reset, Suction Power Regulation- Included Documentation: German User Manual (UR10e) and Heidenbluth documentation binders- System Configuration: Robot mounted on a linear 7th-axis track system running alongside the welding table- Additional Equipment: Welding torch, hose packages, integrated cable carrier chain (energy chain), control cabinet with main switch, teach pendant, shielding gas cylinder rack

Condition: used, This listing is for the LABCOLD RLDF1520 Climatic Class 4 Refrigerator The unit is in full working condition and is ready for immediate use The LABCOLD RLDF1510 is a pharmacy / vaccine‑grade refrigerator designed for storage of temperature‑sensitive medicines, vaccines, or biological materials Some of its key specs and features: Feature Specification / Detail Capacity ~ 430 litres External Dimensions (H × W × D) 1860 mm × 600 mm × 700 mm Nwodsxhdthopfx Agrjl Temperature Operating Range +2 °C to +8 °C (nominal operating ~5 °C) Control / Monitoring “IntelliCold™” controller, 24/7 temperature logging, alarms (high/low temp, door open, power failure) Insulation / Construction Enamelled steel exterior, corrosion‑resistant painted aluminium interior; fan‑assisted cooling; off‑cycle auto defrost Door Type Solid door (non‑glass) version Other Features Door lock with keys, access port for probe, remote alarm contacts, data storage (13 months) Power / Energy Use Often quoted ~ 5.52 kWh/24h (for a 440 L variant/related model) In short: this is a robust, regulated refrigerator intended for cold chain use (i.e. storage of medicines, vaccines, biologics) rather than for general domestic or food us

Condition: good (used), Year of construction: 2001, 4 electric chain hoists, Fanr. CHAIN MASTER STAGE CONSTRUCTION Type: VBG 70 LIFTKET, built in 2001. Lifting height: 20 m. Load capacity: 1000 kg without control block. Nwodewd Tgfjpfx Agrjl

Year of construction: 2021, condition: excellent (used), functionality: fully functional, controller model: PLC Siemens S7, production capacity: 4,000 unit/h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Capacity: 4,000 bottles/hour Dimensions of screw cap: 30 × 10 mm Dimensions of PET bottle (20 ml): 26.05 × 48.38 mm MACHINE DETAILS Control system: PLC Siemens S7 Sorting hopper Height of transport chains: approx. 1,000 mm ± 50 mm Power consumption: 2.5 kW Voltage supply: 380/400 V Fuse rating: 16 A EQUIPMENT Centrifugal cap sorter made of stainless steel AISI 304 with cap level sensor Cap feed chute made of stainless steel AISI 304 with electronic cap jam detector Manual device for removing misaligned caps Pick-and-place system Capping heads with magnetic clutch and cap cone Bottle neck ring centering with spikes Frequency-controlled geared motor Special design of the height adjustment range for handling bottles outside the height adjustment range Anti-rotation device Protective device to cover the bottles Electric height adjustment of the capping head Axially adjustable worm Control cabinet Machine drive via Danfoss VLT 2800 frequency inverter Touch panel for operation FESTO pneumatics Diameter of the feed table: 800 mm Feed table with frequency inverter and separate drive Conveyor extension at the machine inlet: 500 mm Conveyor extension at the machine outlet: 200 mm Sensor control Mechanical cap feeding system with floor-mounted storage container Nsdpfezyihhox Agrswl Vertical conveyor made of stainless steel AISI 304 with cap conveyor belt

Condition: as good as new (ex-display), Year of construction: 2024, Axolox 3021 CNC wood router - display machine available immediately - in 19mm Forescolor, consisting of a router table (X-axis), gantry (Y-axis), Z-axis unit made of compact board, and a base frame, with adjustable machine feet. Router bed as a sacrificial board made of 19mm MDF. Table openings pre-prepared lengthwise and crosswise. Mechanical set consisting of profile guides including profile guide carriages, recirculating ball screws, and precision racks. All elements assembled, pre-lubricated, including a test run, and immediately ready for operation. The control set consists of control cables, energy chains, planetary gears, stepper motors, high-performance power amplifiers, power supply, and toroidal transformer, fully pre-assembled in the control cabinet, as well as sensors for each axis. Switching relays for automatic control of the existing extraction system. Brush seals for dust protection, as well as CE-compliant safety devices with a mobile extraction system and a laser scanner mounted on one side for monitoring the work area, with a 275° and 5.5 m field range (positioning the machine in a corner of the room). A handheld control unit is equipped with all the necessary functions for operating the machine, including an emergency stop button and a deadman's switch. A tool length sensor is used to determine the tool length and change the active zero offset. A 2.2 kW high-frequency spindle includes a union nut, frequency converter, line filter, brake resistor, and collet set. A built-in monitor includes a mini PC with Windows 10 and Beamicon2 control software, as well as a mouse and keyboard, pre-installed in an ergonomic desk. A Rhino 7.0 CAD license and an Estlcam V11 CAM license, as well as all necessary documentation, will be sent by email prior to delivery. - Milling bed designed as a vacuum table consisting of six adjustable sub-elements. Cross table made of PE with an MDF cover plate. Vacuum pump from Becker with an output of 160 m³/h, with an oil-driven rotor. A 16 amp, 400 V AC plug is required for the vacuum pump's power connection. The customer must provide 3 mm HDF raw on both sides for the entire vacuum table (3000 x 2100 mm) as a sacrificial plate. (Recommended use: machining coated chipboard) - Tool set: 10 pieces 2 x 5 mm TAC double-flute cutters 8 x 4 mm solid carbide single-flute cutters - Maintenance package: Including a 150 ml grease gun, a 400 g cartridge of high-performance grease, a 500 ml can of silicone spray grease, and a grease nipple - Clamping device as an attachment for the existing high-frequency spindle. Suitable for slightly curved and particularly thin materials. Njdpfx Agowdny Tjrswl Location: From stock, 54634 Bitburg - Available immediately - Subject to prior sale

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. Nodpfxsfz I D Ds Agrowl This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: used, Year of construction: 2015, axis stroke (X,Y,Z) 6175x1550x300 mm Number of spindle head vertical 20 St. Number of spindles head horizontal 10 St. Number of milling agregates 1 St. Speed 24.000 U/min. Capacity 300 kg/h Sawing unit ja_yes 0 Control Homag PC85 CNC powerTouch HOMAG BMG 511 /60/12/F/K Profi ----- Machine already professionally dismantled and stored at our warehouse in Oberkochen: - 5-axis CNC processing center - Moving gantry machine (dual-drive gantry system) - 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm - 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° - 1 Chain tool changer, 30-position - Includes SL laser projector - Includes vacuum suction cups (as available) - Spare parts and accessories as shown in photos - Last HOMAG 5-axis service: 2024 - Last HOMAG service: 2025 - Price includes professional dismantling and loading onto customer's truck - Costs for loading frames/transport securing devices NOT included; see note at the end of the description Technical Data ----- Max. workpiece lengths: All aggregates: Single 6,000 mm; Pendulum min. 1,550 mm, max. 3,200 mm Tool dia. 25 mm: Single 6,175 mm; Pendulum min. 1,550 mm, max. 3,200 mm Max. workpiece width: All aggregates, front stop 1,100 mm Milling operation tool dia. 25 mm: Front stop 1,325 mm, rear stop 1,550 mm Workpiece thickness: Max. 300 mm including clamping devices Nwjdpfx Aozqggvegrsl Routing spindle and drilling head ----- 2 independent Z-axes 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm Liquid-cooled routing spindle, DRIVE5C+ aggregate interface with 3-point torque support 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° "MPU" MultiProcessingUnit with C-axis +/- 185° for drilling and sawing operations at any angle 1 motor 2.3 kW, frequency-controlled, max. speed 7,500 rpm selectable via program for rapid processing even with small diameters 20 vertical HIGH-SPEED spindles 10 horizontal spindles 1 grooving and parting saw Includes Z-axis module Includes extraction hood Tool changer: ----- 1 Pick-up station for 350 mm saw blade for DRIVE5(C)+ 1 Chain tool changer, 30-position, D=80 For tools and aggregates with HSK-F63 Chain changer with 30 tool/aggregate positions for use with machines featuring 1 main spindle 1 upstream double gripper for rapid tool changing Console table with ----- 12 consoles, Y=1,500 mm for K-table 6 lifting rails (HPL), lift 100 mm Additional accessories: ----- SPEED PACK: Increase in... Max. traverse speed of X-axis: 80 m/min; vector speed = 110 m/min Contour laser positioning aid 1 vacuum pump (300 m³/h) Chip conveyor belt with extension Vacuum clamping system SL-Laser Energy-efficient 5-axis extraction hood Safety equipment: ----- Laser, bumper SAFESCAN for Speed ??Pack CE mark HOMAG Speed ??Pack HOMAG Quality Package Enclosed energy chain Control system ----- PowerControl PC85 HOMAG powerTouch Handheld terminal HOMAG IPC Powerpack Software ----- HOMAG woodWOP 7.1 WoodScout diagnostic system MMR B...

Condition: used, Year of construction: 1988, operating hours: 14,890 h, Equipment: all wheel drive, Manufacturer: EDER Hydraulikbagger GmbH, 8359 Eging Njdoynfkpspfx Agrowl Model: M 835 Year of manufacture: 1988 Chassis No.: 61588 Permissible total weight: 21,000 kg Permissible front axle load: 12,000 kg Permissible rear axle load: 12,000 kg Made in Germany The machine runs well.

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: E-1579, total length: 3,000 mm, total height: 2,450 mm, overall weight: 5,400 kg, total width: 1,800 mm, rotational speed (max.): 900 rpm, THM TQZ1200 Shredder – Year 2017 THM TQZ1200 shredder for recycling and material processing applications. The machine performs the shredding process using rotating accelerating elements and is designed for integration into processing and recycling plants. Key technical features: Manufacturer: THM Recycling Solutions Model: TQZ1200 Year of manufacture: 2017 Machine number: E-1579 Main motor power: 90 kW Electrical supply: 400 V / 50 Hz Impact head speed: 900 rpm Internal diameter of the working chamber: 1,200 mm Height of the working chamber: 1,210 mm Accelerating elements: chains Approximate dimensions: 3,000 × 1,800 × 2,450 mm Approximate weight: 5,400 kg Working hydraulic pressure: approx. 130 bar Hydraulic tank capacity: approx. 100 l Robust industrial machine designed for integration into processing and recycling lines. Technical documentation available. For more information, photographs, or technical documentation, please contact us. Njdpjz Erxwofx Agrjwl

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. Nwsdpeflmdwefx Agrol - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: used, Year of construction: 2013, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, power of the milling unit: 5,000 W, input current: 200 A, chain width: 70 mm, input frequency: 50 Hz, Double-sided profiling milling machine for producing tenons, with a slot width, minimum processing width of 70 mm, length of 2500 mm, and 5 machining units per side, with belt-type clamping. Cutting tools not included. Nsdpfezy I Tcjx Agrewl

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. Nwsdpfx Agjfz Nb Torel The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Condition: used, Year of construction: 2006, operating hours: 10,010 h, Equipment: all wheel drive, MAKE: NEW HOLLAND KOBELCO TYPE: E135SR-1E YEAR: 2006 CE: YES Nwsdjyzliyopfx Agrol WORKING HOURS: 10,010 HOURS TYRES/UNDERCARRIAGE: 60% POWER: 63 KW ENGINE: ISUZU BB-4BG WEIGHT: 14,100 KG OPTIONS: 14,100 KG MACHINE HYDRAULIC QUICK COUPLER CLIMATE CONTROL FULL PIPING (HAMMER LINES) SORTING FUNCTION TRACKS 60% GOOD GOOD CONDITION Price is Ex VAT.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Nwjdefz Dt Nopfx Agrol Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Nwedpfsfz Dubox Agrol Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.

Year of construction: 2020, condition: new, Transport systems Depending on the customer's requirements, transport systems can move on the floor or be suspended on poles. - For comfortable solutions for manual installations, we recommend suspended cross traverses (cross transport). - For automated systems, chain conveyors are most often used that do not stop and are a great solution for companies that focus on quality and repeatability of the process. Nwodpfx Aofz I Edjgrel - For companies that make different items at once and have e.g. several cabins with different colors, flexible solutions with the use of the power-and-free conveyor are used. This is the most expensive solution. All installations are made to measure, depending on the customer's requirements. Continuous suspended chain transport systems are designed and manufactured to individual customer orders. In this system, it is also possible to make bottom conveyor systems on which details are placed, e.g. flower pots, rims (photo). ROMER also manufactures suspended transport systems. Crossbeams (cross transports) are designed and made for the needs of specific installations The use of one photocell The use of one photocell in the space of the detail allows you to measure its length and, consequently, gives the option of switching on the guns when the detail appears in their range, and switching off the guns immediately after painting the detail. The photocell is standard equipment. Identification of details by means of special markers. Above the sling there are plates with identification holes. Based on them, the PLC controller in conjunction with the photocell recognizes the painted detail, turns the guns on and off in good time - thus saving energy and powder paint. Vertical shape detection. The use of light gates with horizontal detectors allows the PLC controller to analyze the shape of a detail vertically. The PLC controller counts the time in which the detail should appear in the gun space - thanks to this it is possible to selectively turn the guns on or off. Using light gates with multiple sensors horizontally and vertically. This solution allows precise measurement of workpiece dimensions, thanks to which it is also possible to control manipulators.