Used Ikegai Component for sale (8,242)

Condition: ready for operation (used), Indramat DDS02.2-W050-B, serial number: 263406-04551, professionally and completely overhauled and tested, with a 12-month warranty. 100% functional. Scope of delivery as shown in the photos. Iiodpfez R Ikhox Amgsh

Condition: ready for operation (used), Heidenhain. 293 890-04 A2 communication board, 293881 03, serial number 10193264, used, shows normal signs of wear, 100% functional, scope of delivery as shown in the photos. Ijdpfx Amoz Syy Regjih

Condition: ready for operation (used), Indramat KDS 1.1-50-300-W1 / 220 AC servo controller, serial number 6059, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iijdpfxoz R Ikuj Amgjh

Condition: ready for operation (used), Philips PE 1870/03 power supply unit, model NC 9415 L, serial number SN: W113310887, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iodez R Ilfspfx Amgjih

Condition: ready for operation (used), Heidenhain 337 558-04 servo card 00, used, in good condition, 100% functional, scope of delivery as shown in the photos. Isdpfx Amez Syy Dsgeih

Condition: ready for operation (used), Hydac SB0 140-1.4 E1 / 112A-140FT 080, membrane accumulator, PB 140 bar, 1.4L, -10 / +80°C, serial number 106036, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iiodpfjz Tbf Djx Amgsh

Condition: ready for operation (used), IKEGAI tool turret, 12-station, outer diameter: 3700 mm (without tool holders), flange diameter: 240 mm, bore diameter: 60 mm, from IKEGAI TURN 25, used, with normal signs of wear, 100% functional. NOTE: Please request a separate quote for packaging and shipping costs! Iiodji Ea Ucspfx Amgsh

Condition: used, DYEMANSION Type: POWERSHOT C 2.0 This system has never been put into operation. (like new!!) Dyemansion Powershot C blasting cabinet Gentle cleaning of powder-based plastic components DYEMANSION POWERSHOT C 2.0, Year of manufacture: 2021 The industry standard for simple and efficient powder removal Automated powder removal increases your production capacity With the Powershot C, a medium-sized build volume can be depowdered in just ten minutes. The time required for part cleaning and the personnel in your production can be significantly reduced. This increases your efficiency. By investing in automated powder removal with the Powershot C, up to four manual blasting systems can be replaced. Gentle surface treatment thanks to intelligent hardware functions The blasting cabinet of our Powershot C is equipped with a rotating basket and lined with stainless steel. Different blasting nozzles and ionization ensure reproducible results. A basket with a soft, replaceable lining protects the parts from damage during the process. Two simultaneously operating blasting nozzles are arranged perpendicular to the rotating basket and the parts contained within. This configuration guarantees efficient powder removal. High user comfort with improved ergonomics and process control Experience a new level of process control with a touchscreen and integrated control panel. The Powershot C is operated via a user-friendly interface and pre-installed programs can be started. Individual programs can be easily configured and saved. The user-centered design makes everything easily accessible and safe to operate. Continuous monitoring enables an efficient and reproducible process. Technical data: POWERSHOT C AUTOMATION Individual programming, control and monitoring of process parameters via control panel and touchscreen. PERFORMANCE: Cycle time: Variable from 1 to 40 minutes, typical cycle time 3 to 10 minutes Iijdpozgr T Tjfx Amgoh Capacity per cycle: Up to 3/4 EOS P396, 1x HP Jet Fusion 4200/5200 or almost 1.5x full Stratasys H350 build volume Effective volume of the basket 26 liters DIMENSIONS: System (L x W x H) 1700mm x 1310mm x 2030mm Recommended space required in operation (L x W x H) 2500mm x 2915mm x 2300mm WEIGHT: System 480 kg Power: 1kW Requirements 3x400V > 1kW 50Hz 2.5A COMPRESSED AIR: Consumption Minimum: 1.4 m³/min at 2.2 bar Maximum: 1.8 m³/min at 5 bar NOISE EMISSION: Sound level < 80dB(A) Condition: used Scope of delivery: (See image) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions for you by telephone.

Condition: ready for operation (used), Philips control panel for MAHO CNC 432 / 27.073757, serial number: 93.434, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iijdpfoz R Ik Uex Amgeh

Condition: used, Kübrich   Kübrich Test Systems 48V Belt Starter Generator - Component Test Bench   Details of the test bench: (See Figure 13) Frame with (1) Mounting device for a belt starter generator (2) Load machine (3) Belt (4) MP1: Control cabinet (5) MP3: Control cabinet for control, interface panel with main switch, I/O (6) MP2: Control cabinet with Simotion (7) MP4: Control cabinet with DC-DC converter (8) H3: Measuring technology box (9) H4: Interface box   Intended use: The test bench is used for carrying out tests on belt starter generators during development.   Technical data: Electrical connection data Power supply: 400 V / 32 A Battery simulation: 0 - 60 V Current: 0 - 250 A (continuous) Current: 330 A (short-term, less than 1 s) Control voltage 24 V   Mechanical performance data according to the data sheet of the load machine A gear ratio of 1:2 to the test specimen shaft must be considered. Speeds: Load machine: Manual operation: 0 - 50 rpm Automatic operation: min Test specimen motor: Manual operation: 0 - 0 rpm Automatic operation: 0 - rpm   Dimensions and weight Width: 850 mm Height: 1386 mm Length: 1687 mm   Weight: approx. 1.2 t   Condition: used   Scope of delivery: (See Figure)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone. Iodpfx Aezhkb Somgsih

Condition: ready for operation (used), Control panel for Maho MH 800 C machine + key, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iiodpsz Tbdgofx Amgoh

Condition: ready for operation (used), Siemens 1FU1050-6GF tachometer for 1FT series, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Ijdpfx Amez Sy Axegoih

Condition: ready for operation (used), Heidenhain ROD 800 36000 / K7 angle measuring device. 219 845 21, serial number: 2829928B. Professionally and completely overhauled and tested, with a 6-month warranty. 100% functional. Scope of delivery as shown in the photos. Iiedpfx Askxh Dhjmgoh

Condition: ready for operation (used), Siemens 6FC5357-0BA21-1AE1 NCU 572.2 Version: B, Serial No.: T-K32026206, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Iedpfx Amei Envxjgeih

Condition: ready for operation (used), Bosch VM 60/EB / supply module serial number: 368321, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please price separately Iedpfotvctiox Amgeih

Condition: ready for operation (used), Heidenhain. 329 660-02 drive, serial number 8351036 + Seagate ST32122A hard drive, DCT3.02 XKV27823, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iisdpoz Tbfdjfx Amgoh

Condition: ready for operation (used), GMN TSE 100scg - 16 000 / 3.7 Spindle SP: 16000 rpm, used, normal signs of wear, 100% functional, scope of delivery as per photos Iodpfx Amjqfub Rogeih

Condition: ready for operation (used), Indramat KDA 3.2-100-3-A0S-W1 AC-Mainspindle Drive SN230902774878005, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos. The agreed sales discounts do not apply to this article. Please ask for price separately! Iijdpfx Amotvctxegjh

Condition: ready for operation (used), Heidenhain LS 704 ML 720 ID 237 133 05 SN 4061337E + LS 704 read head SN 3225259E, professionally completely overhauled and tested with 6 months warranty, good condition, 100% functional, scope of delivery as per photos Isdpfx Ajrv R Nhemgoih

Condition: ready for operation (used), Siemens 6SN1123-1AA00-0JA1 LT module SN:ST-MO2003829, professionally completely overhauled and tested with 24 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Isdoxahflopfx Amgsih

Condition: ready for operation (used), Siemens 6SL3120-1TE26-0AA3 Single Motor Module SN:ST-K46110183, professionally completely overhauled and tested with 24 months warranty, 100% functional, scope of delivery as per photos, the agreed sales discounts do not apply to this article. Please ask for price separately! Iijdpfexahacjx Amgjh

Condition: ready for operation (used), Heidenhain ECN 223 2048 rotary encoder . 377 749-03 SN:14526893X , professionally completely overhauled and tested with 6 months warranty, 100% functional, scope of delivery as per photos Iodpfx Aom A Rpijmgsih

Condition: ready for operation (used), Bellows for Maho MH 800 C machine, width: 45.5 cm, length: 85 cm, used, in good condition, 100% functional, scope of delivery as shown in the photos. Iiodoz Tbdmspfx Amgsh

Condition: ready for operation (used), Siemens 6AV7611-0AB22-0AJ0 SIMATIC PANEL PC 670 / PANELSLSYSTEM QF 10" TFT Version E, SN: T-N72064241, used, normal signs of wear, 100% functional, scope of delivery as shown in the photos. Iiodpfx Asi Edc Tsmgjh

Condition: ready for operation (used), Indramat RAC 2.3-150-380-A-00-W1 spindle drive, serial number as shown in the photo, used, fan missing, minor signs of wear, 100% functional, scope of delivery as shown in the photos. ATTENTION: Please request the costs for packaging and shipping separately! Iedsi Ebllepfx Amgeih