Used Ima Portal Machining Center for sale (73,441)

Condition: ready for operation (used), Year of construction: 2004, operating hours: 77,374 h, functionality: fully functional, machine/vehicle number: 419-01, travel distance X-axis: 6,000 mm, travel distance Y-axis: 630 mm, controller model: Siemens 840D, spindle speed (max.): 12,000 rpm, The machine spindle was replaced in 2021 (spindle operating hours approx. 7,300 h)! The machine underwent a major overhaul in 2013! The machine has been continuously serviced and repaired annually by the manufacturer and kept up to date with the latest technology (preventive maintenance). The last service was performed in January 2024. TECHNICAL DETAILS 4 axes Travel range X-axis: 6,000 mm Travel range Y-axis: 630 mm Travel range Z-axis: 550 mm Swivel range B-axis: ± 100° Spindle speed: 12,000 rpm Spindle torque: 140 Nm Rapid traverse rate in X/Y/Z: 60 m/min Chip-to-chip time vertical: 3.0 sec. (3.3 sec. DIN) Chip-to-chip time horizontal: 4.7 sec. (5.0 sec. DIN) MACHINE DETAILS Control system: Siemens 840D Power type: 3/N/PE Nwedpfx Abszlnm Hozsi Mains frequency: 50/60 Hz Operating voltage: 400 V Control voltage: 220/24 V Connected load: 52 kVA Rated current: 75 A Fuse rating: 80 A Weight: 19,500 kg Operating hours: 77,374 h EQUIPMENT 5-axis milling package (simultaneous milling on up to 5 axes) Chip conveyor, discharge height: 1,050 mm Coolant through spindle (CTS) preparation Vacuum rotating filter KNOLL VRF250 (steel, cast iron, aluminum, plastic, brass) High pressure 70 bar with HD pump and servo valve Coolant nozzle per swivel field Emulsion mist extraction, 2 extraction fans at 800 m³/h each Rotating viewing window on the left and right (1,400 mm from the center of the machine) Automatic loading doors Center partition for pendulum machining 92 tool positions HSK-A63 (rear magazine) Blow-off air Tool life monitoring Additional V24 RS232 in the control cabinet BDE/MDE interface (states: machine on, machine running, piece counter) Marposs (Brankamp) collision monitoring CMS100 3D machine model for kinematic simulation in the CAM programming system Hydraulic unit 210 bar, 2 clamping circuits, separate system clamping pressure per swivel field, clamping pressure control Linear clamping system KOHN 8 hydraulic clamping cylinders KOHN Multi 2000 MFS 125/680 HD Two-part grating floor for the operator across the entire operating width of 6,000 mm

Condition: ready for operation (used), Year of construction: 2009, machine/vehicle number: 19500648, functionality: fully functional, workpiece length (max.): 3,500 mm, workpiece width (max.): 130 mm, workpiece height (max.): 120 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Max. profile length: 3,500 mm Max. profile width: 130 mm Max. profile height: 120 mm MACHINE DETAILS Number of milling and drilling units: 7 Max. Friedrichs motor speed: 18,000 rpm Max. machine motor speed: 1,500 rpm Electrical operating voltage: 400 V, 50 Hz Required network voltage: 20 kW Cable connections: 400 V NPE Operating height of the control cabinet: 1,050 mm Pneumatic operating pressure: 6 - 7 bar Pressure consumption per cycle: Approx. 3,500 NI Pneumatic line pressure at 70 °C: Approx. 15 bar EQUIPMENT Automatic screw feeder Arrangement of the units: On a wheel, which enables machining at different angles. Nwsdpfozln D Esx Abzsi

Condition: ready for operation (used), Year of construction: 2005, operating hours: 20,729 h, functionality: fully functional, travel distance X-axis: 980 mm, travel distance Y-axis: 630 mm, travel distance Z-axis: 630 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 18,000 rpm, TECHNICAL DETAILS Travel range X-axis: 980 mm Travel range Y-axis: 630 mm Travel range Z-axis: 630 mm Spindle speed range: 0–18,000 rpm Tool holder: HSK 63 MACHINE DETAILS Control system: Heidenhain iTNC 530 Clamping area: 1,250 × 700 mm Operating hours Machine operating hours: 46,922 h Program runtime: 20,279 h Spindle operating hours: 20,746 h EQUIPMENT Fixed angular table 3D measuring probe Heidenhain Tool measurement in the working area with BLUM laser Nwodozmry Tspfx Abzji Vertical tool changer with 32 magazine slots Full protective enclosure with sliding doors and interior lighting Electronic handwheel Operating modes 3 and 4 Chip conveyor Coolant system 3 height-adjustable machine feet Spindle cooler Control cabinet cooler from Rittal Operating manuals

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain TNC 410, rotational speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 800 mm Travel range Y-axis: 500 mm Travel range Z-axis: 500 mm Spindle speed range: 0–10,000 rpm Spindle speed control: stepless Tool holder: SK 40 Magazine capacity: 20 MACHINE DETAILS Control system: Heidenhain TNC 410 Clamping area: 1,000 × 500 mm EQUIPMENT Fixed angular table Vertical tool changer Full enclosure with sliding doors and interior lighting Various tool holders SK 40 Electronic handwheel Njdpfxszmryyj Abzewi Coolant system with enhanced pump Coolant pressure: 20 bar Chip conveyor Operating manual

Condition: ready for operation (used), Year of construction: 2002, operating hours: 20,377 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 500 mm, controller model: Heidenhain iTNC 530, rotational speed (max.): 20,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 650 mm Travel range, Z-axis: 500 mm Speed range: 0–20,000 rpm Speed control: stepless Magazine capacity: 30 Tool holder: HSK 63 MACHINE DETAILS Njdpfozmrpusx Abzowi Control system: Heidenhain iTNC 530 Clamping area: 900 × 600 mm Operating hours Machine operating hours: 54,796 h Spindle operating hours: 23,462 h Program run time: 20,377 h EQUIPMENT Fixed tilting table Vertical tool changer Full enclosure with sliding doors and interior lighting Electronic handwheel Tool measurement in the working area with BLUM laser 3D infrared probe Renishaw Chip conveyor Coolant system 4 height-adjustable machine feet Operating manuals

Year of construction: 2007, condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 280 mm, travel distance Z-axis: 300 mm, spindle speed (max.): 21,000 rpm, working length: 3,750 mm, TECHNICAL DETAILS Nwedpfx Abjznczkszji Machining length with bar support: 3,750 mm Machining length without bar support: 3,500 mm Travel range X-axis: 3,500 mm Travel range Y-axis: 280 mm Travel range Z-axis: 300 mm Positioning speed: 30 m/min Positioning accuracy: ±0.1 mm Spindle power: 6 kW Spindle speed: 21,000 rpm Spindle interface: HSK F63 Tool positions: 5 Max. tool diameter (manual): 200 mm Max. tool diameter (automatic): 92 mm Max. saw blade diameter: 500 mm MACHINE DETAILS Air consumption: approx. 50 l/cycle Compressed air requirement: > 7 bar Power supply: 400 V, 3-phase Note: The machine's operating hour counter is defective and cannot be read. The machine was only used in a single-shift operation.

Condition: ready for operation (used), Year of construction: 2016, operating hours: 11,147 h, functionality: fully functional, machine/vehicle number: 4417, travel distance X-axis: 2,320 mm, travel distance Y-axis: 1,980 mm, travel distance Z-axis: 860 mm, controller model: Siemens Sinumerik 840D sl, spindle speed (max.): 40,000 rpm, No minimum price – guaranteed sale to the highest bidder! The new price of the machine was €425,000 plus VAT! TECHNICAL DETAILS Travel range X1/X2 axis: 2,320 mm Travel range X3/X4 axis: 2,320 mm Travel range Y1/Y2 axis: 1,980 mm Travel range Z1/Z2 axis: 860 mm Rotational range B1 axis: ±181° Rotational range B2 axis: ±181° Rotational range C1 axis: ±361° Rotational range C2 axis: ±361° Spindle speed: 40,000 rpm Tool interface: HSK-E40 Spindle power: 7 kW Number of spindles: 2 Travel speed in X direction: 90 m/min Travel speed in Y direction: 45 m/min Travel speed in Z direction: 90 m/min Nsdjzl T U Aopfx Abzswi Number of tools: max. 6 Tool diameter with 4 tools: max. 40 mm Tool diameter with 2 tools: max. 240 mm Tool length from reference plane: max. 270 mm Tool weight: max. 2 kg Total weight of all tools: max. 24 kg MACHINE DETAILS Control system: Siemens Sinumerik 840D sl Compressed air supply Compressed air quality: according to DIN ISO 8573-1 Pressure: min. 7 bar Air volume flow: approx. 1,000 Nl/min Voltage: 400 V (±5 %) Frequency: 50 Hz Power connection: 3 phases, neutral conductor, and protective conductor Short-circuit strength Ic: 17 kA Dimensions & Weight Dimensions (X x Y x Z): approx. 5,800 x 3,600 x 3,000 mm Machine weight: approx. 15.0 t Operating hours Spindle hours, Spindle 1: 7,827 h Spindle hours, Spindle 2: 7,315 h EQUIPMENT Chip conveyor Hexagon 3D measuring probe Note: Further technical details can be found in the attached offer. Clamping devices and tools are not included in the offer.

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 420 mm, travel distance Z-axis: 480 mm, controller model: Heidenhain TNC 407, rotational speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 3,000 mm Travel range Y-axis: 420 mm Travel range Z-axis: 480 mm Table size: approx. 3,000 × 500 mm Spindle connection: SK40 Maximum speed: 6,000 rpm Nsdjzncnqepfx Abzowi Tool changer: 22-position MACHINE DETAILS CNC control: Heidenhain TNC 407 EQUIPMENT Additional angular/universal milling head Coolant system Documentation/manual 4/5-axis machining: possible Machining of complex workpieces: possible

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 800 mm, controller model: Siemens 840D, spindle speed (max.): 12,500 rpm, TECHNICAL DETAILS Travel range, X-axis: 800 mm Travel range, Y-axis: 800 mm Travel range, Z-axis: 800 mm Spindle speed: 12,500 rpm Number of axes: 4 Nwodpfx Aszncnksbzsi Pallet size: 630 × 630 mm Max. tool length: 600 mm MACHINE DETAILS Control system: Siemens 840D

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 1,100 mm, controller model: Siemens 840D, spindle speed (max.): 8,000 rpm, TECHNICAL DETAILS Travel range, X-axis: 1,000 mm Nwsdpfjzncndjx Abzoi Travel range, Y-axis: 1,200 mm Travel range, Z-axis: 1,100 mm Spindle speed: 8,000 rpm Pallet size: 630 × 630 mm Rotary table: 360,000 × 0.001° Tool positions: 400 Tool interface: HSK 100 Number of machining axes: 5 MACHINE DETAILS Control system: Siemens 840D

Condition: ready for operation (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: KMM 540.1196, travel distance X-axis: 3,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 550 mm, controller model: Fanuc 15 M, TECHNICAL DETAILS Travel range, X-axis: 3,000 mm Travel range, Y-axis: 550 mm Travel range, Z-axis: 550 mm MACHINE DETAILS Control system: Fanuc 15 M Nwjdpfjzlfqcox Abzei Rotary axis: Fibro NC1

Condition: ready for operation (used), Year of construction: 2023, operating hours: 2,403 h, functionality: fully functional, machine/vehicle number: 1201414, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range X-axis: 1,270 mm Nedpfx Ajzl Rzysbzjwi Travel range Y-axis: 508 mm Travel range Z-axis: 635 mm Spindle speed: 12,000 rpm Tool interface: CAT40 Tool positions: 30 MACHINE DETAILS Operating time: 11,136 hours (as of July 26, 2026) Machining hours: 2,403 hours (as of July 26, 2026) Cycle hours: 3,364 hours (as of July 26, 2026) EQUIPMENT Internal coolant supply Renishaw intuitive wireless probe system Mist collector Chip conveyor Approx. 15 tool holders

Condition: ready for operation (used), Year of construction: 2019, operating hours: 4,456 h, functionality: fully functional, machine/vehicle number: 1163744, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, workpiece weight (max.): 1,814 kg, spindle speed (max.): 10,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel, X-axis: 1,016 mm Travel, Y-axis: 660 mm Travel, Z-axis: 635 mm Nodpfx Aezlxnhjbzjwi Spindle speed: 10,000 rpm Rapid traverse rate, X-axis: 18,000 mm/min Rapid traverse rate, Y-axis: 18,000 mm/min Rapid traverse rate, Z-axis: 18,000 mm/min Feed length, X-axis: 1,016 mm Feed length, Y-axis: 660 mm Feed length, Z-axis: 630 mm Feed rate, X-axis: 12,700 mm/min Feed rate, Y-axis: 12,700 mm/min Feed rate, Z-axis: 12,700 mm/min Workpiece length (max.): 1,370 mm Workpiece width (max.): 610 mm Workpiece height (max.): 630 mm Workpiece weight (max.): 1,814 kg Table width: 610 mm Table height: 630 mm Table length: 1,372 mm Table load capacity: 1,814 kg Number of tool positions in the tool magazine: 30 MACHINE DETAILS Operating hours: 20,865 h (as of July 26, 2026) Machining hours: 4,456 h (as of July 26, 2026) Cycle hours: 6,745 h (as of July 26, 2026) Control system manufacturer: Haas Rated power: 45 kVA Torque: 460 Nm Spindle motor power: 44.7 kW Dimensions (L x W x H): 1,370 x 660 x 630 mm EQUIPMENT Chip conveyor with 4 additional feed screws ISO 50 tool holder 30-position automatic tool changer (ATC) RTAP-3 synchronized thread cutting TSC 300 psi (21 bar) Coolant cooler Programmable coolant nozzle MIN QTY LUBE (minimum quantity lubrication) Automatic air nozzle Air cooling through the spindle Renishaw WIPS High Speed Machining ACF 25-micron filter Control cabinet cooler Mist separator 4th axis pre-wired DWO/TCPC WIFI connection to the local network WIFI camera Automatic door 15 tool holders

Condition: good (used), Year of construction: 2009, Horizontal machining center Machine type: DMG DMC 65 H duoBlock Control: Siemens 840D Solutionline Year: 2009 new spindle: 2026 Nwjdpjzi Dz Ijfx Abzsi SPECIFICATIONS Travel X-Axis: 700 mm Y-Axis: 700 mm Z-Axis: 700 mm Spindle speeds: 12.000 rpm Tool: CAT 40 Toolchanger Tool capacity: 45 Amount of paletts: 2 Palett size: 500 x 500 mm Equipment Chip conveyor Chip rinsing pistol Internal cooling: 40 bar Cooling tank: 960 l Caliper: Renishaw Tool setter: Blumlaser 3D Quickset Electronical handwheel New in 2026 Spindle bearing Rotary union All pneumatic lines All oil and air filters All oils and fats Laser serviced Various wearing parts

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 540 mm, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rapid traverse Z-axis: 32 m/min, feed rate X-axis: 32 m/min, feed rate Y-axis: 32 m/min, feed rate Z-axis: 32 m/min, controller manufacturer: Okuma, controller model: OSP P200M-H, rotary table diameter: 500 mm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Okuma MU500VA CNC Vertical Machining Centre (2007) Equipped with OKUMA OSP P200M-H CNC CONTROL 20" ROTARY PLATEN 4TH AND 5TH AXIS BUILT IN TRUNION Nwjdpfxoyf Ncqs Abzoi 32 POSITION AUTOMATIC TOOL CHANGER COOLANT THRU SPINDLE TOOL LENGTH MEASURING Travels X-axis (saddle left/right) – 1250mm, Y-axis (pallet front/back) – 660mm, Z-axis (spindle up/down) – 540mm, A-axis – +20~-110 deg., C-axis – 360 deg., Table surface to spindle nose – 127~667mm Table Table size – ø500mm, Max work size – ø730xh500, Floor to table top – 1073mm, Max load capacity – 500kg Spindle Spindle speed – 15000rpm, Turning specification – C-axis table 1000rpm , No. of spindle ranges – Infinitely variable, Tapered bore – 7/24 taper No.40, Bearing dia – ø70mm Feed Rapid traverse – X-Y: 40m/min, Z:32m/min, Rapid traverse (A-C) – 18,000 deg/min, Cutting feed rate – X-Y-Z: 32m/min Motors Spindle (10min/cont) – 11/7.5kW ATC Tool shank type – MAS BT40 Big plus, Retention knob type – MAS 2, Tool capacity – 32, Max. tool dia (w/ adjacent tool) – ø90mm, Max. tool dia (w/o adjacent tool) – ø125mm, Max. tool length – 400mm, Max. tool mass – 8kg, Tool selection – Memory random ATC Retention knob type – MAS 2, Tool capacity – 32, Max. tool dia (w/ adjacent tool) – ø90mm, Max. tool dia (w/o adjacent tool) – ø125mm, Max. tool length – 400mm, Max. tool mass – 8kg, Tool selection – Memory random

Condition: used, Year of construction: 2013, 2013 SMC Group Routech Accord 30FX CNC machining center, high performance multi-function work table, 400V, 3 phase, X-axis 20' 10", Y-axis 5' 4.7", dual machining heads, rotation speed 6-18,000 RPM, onboard Rapid 12-tool changer, Rapid 16 rear tool changer, work table, pod, and rail, gantry type, has SMC Group CNC control with remote pendant control, 480V, 3 phase, Becker, model 271407, rotary vane vacuum pump, and (1) Texa, model SAW50RBSBCC000, chilling unit with transformer, winning bidder responsible for proper removal. Nodpfoxdc T Sjx Abzowi

Condition: excellent (used), Year of construction: 1998, Mori Seiki SH630 Horizontal Machining Centre Nwedpfxszp Rfto Abzoi Year 1998 Spindle speed - 10,000rpm CNC Control - Fanuc drives / Mori Seiki MSC control 4 Axis Table Length 630mm Table Load 1000kg Table Width 630mm Y axis travel - 760mm Z axis travel - 840mm X axis travel - 840mm Tool magazine with capacity for 60 tools 2 Tombstones Comes with Metal standing frame

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, travel distance X-axis: 1,450 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, DAHLIH VERTICAL MACHINING CENTRE MODEL MCV 1450 CONTROL FANUC 50 TAPER SPINDLE TABLE SIZE 1600 X 800 Nwodpfxsznm Uuj Abzsi TRAVELS - 1450 X 750 X 750 MM TABLE LOAD 2000 KGS GEARED HEAD SPINDLE MOTOR 15 KW ATC MACHINE WEIGHT 14.5 TON

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 610 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 450 mm, table width: 450 mm, table length: 800 mm, spindle speed (max.): 8,000 rpm, Model: 610L Control: Fanuc Series Oi-MC Year: 2012 Table Area: 800 x 450mm ‘X’ Axis: 610mm Nedpfx Ajy N Uh Ujbzjwi ‘Y’ Axis: 460mm ‘Z’ Axis: 450mm Spindle Taper: BT 40 Spindle Speeds: 8000 RPM Carosel 12 Station Tool Changer Dimensions: 2200 x 2300 x 2300mm high Weight: 3400 KGS

Condition: excellent (used), Year of construction: 2016, 2016 Hurco VM10Ui CNC 5-Axis Integrated Trunnion Vertical Machining Centre Nwjdpozn Nu Dsfx Abzji Table Ø200mm (6 'T' Slots). Maximum Table Load 150kg. Axis Travel 'X'=530mm, 'Y'=410mm, 'Z'=480mm, 'A'=+30°/-110°, 'C'=360°. Rapid Traverse 'X,Y,Z'=28m/min, 'A & C'=25rpm. Spindle Nose to Table Min/Max 36mm/520mm. Maximum Spindle Speed 12,000RPM. Spindle Power 7.5kW.Spindle Taper BT40. 24 Position ATC. Maximum Tool Ø89mm, Maximum Tool Length 250mm, Maximum Tool Weight 7kg. S/No. H-VU0284 (2016/11). With Coolant System, Auger Conveyor, Renishaw Laser Tool Setter, Signal Tower & Handwheel. Weight 3,360kg.

Condition: used, Year of construction: 2012, number of axes: 5, working width: 1,240 mm, working length: 3,060 mm, Equipment: CE marking, TECHNICAL DETAILS Machining process: Drilling, Milling Working area X-axis: 3,060 mm Working area Y-axis: 1,240 mm Max. panel thickness: 200 mm Number of working areas: 2 Table type: Flat table Table design: Nesting Table length: 3,060 mm Table width: 1,240 mm Number of controlled axes: 5 Drilling unit Number of drilling units: 1 Installation position: Top Vertical drilling spindles: 12 Horizontal drilling spindles X-direction: 4 Horizontal drilling spindles Y-direction: 2 Total number of drilling spindles: 18 Milling spindle Number of milling spindles: 1 Installation position: Top Controlled axes: 5 Spindle cooling: Liquid cooling Nwsdjzmvqvjpfx Abzoi Grooving unit Number of grooving units: 1 Installation position: Top Design: Fixed grooving unit Grooving direction: X-direction MACHINE DETAILS Power of main electrospindle: 8.5 kW Power of milling spindle motor: 8.5 kW Control system: PC Control Programming software: Xylog Plus Number of vacuum pumps: 1 Suction capacity per pump: 250 m³/h EQUIPMENT CE marking Front safety mats 16-position tool magazine on the machining head Automatic tool changer Vacuum suction cups for workpiece fixing The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photo documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6487

Condition: excellent (used), Year of construction: 2001, functionality: limited functionality, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 510 mm, input voltage: 400 V, Equipment: documentation/manual, kONDIA B 640 4-axis machining center Table: 800 x 400 X-axis travel: 600 mm Y-axis travel: 400 mm Z-axis travel: 510 mm Spindle speed: 6000 rpm 4th axis: SPIRSIN, 170 Ø Control: FAGOR 8055 Tool capacity: 22 Tool holder: ISO 40 Electronic handwheel Nwsdpszp Hfvsfx Abzoi Through-tool coolant Machine dimensions (width x length x height): 1950 x 2123 x 2875 Weight: 3600 kg

Condition: used, Year of construction: 1999, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Machining Center Njdozp E E Ijpfx Abzowi 3-Axis X, Y, Z Mori Seiki Model MV-653/50 Year 1999 CNC Fanuc MSG-803 Phase 3

Condition: good (used), Year of construction: 2004, For sale CNC Horizontal Machining Center HELLER MCH 250 with Robot (YASKAWA GP50 Robot) – Siemens 840D 4-axis For sale, a high-productivity production cell / robotic island including a HELLER MCH 250 horizontal machining center with pallet changer, fully automated with a YASKAWA Motoman GP50 loading/handling robot and its secure loading cell. Complete set, ideal for high-volume production, intensive machining of automotive, aerospace, or precision mechanical parts with automated operation / without human presence. 1. Specifications of the HELLER MCH 250 Machining Center: Brand: HELLER (Gebr. Heller Maschinenfabrik GmbH) Model: MCH 250 Year of manufacture: 2004 Numerical Control (CNC): SIEMENS Sinumerik 840D Order / serial number: 32-46258 Power supply: 400 V / 50 Hz / 123 A Included equipment: 4 axes Automatic pallet changer Large capacity tool magazine (chain / upper matrix type) Chip conveyor with KNOLL high-pressure filtration / coolant unit 2. Specifications of the YASKAWA Loading Robot: Brand: YASKAWA Electric Corporation Robot Model: MOTOMAN-GP50 Type: YR-106VX50-A00 Year of manufacture: August 2018 Load capacity (Payload): 50 kg Robot weight: 570 kg Robot cell equipment: Specific gripper / clamp Gravity-fed / drawer part station / storage unit Complete protective enclosure with housing and CE safety grilles Machines disconnected and sold as is. Nodpfx Abozpzyzszewi

Condition: excellent (used), Year of construction: 2015, Mikron HPM 800U HD 5 axis Vertical Machining Centre, with 7 pallet changer (2015) Traverses XYZ: 800 x 800 x 550mm, 500 x 500mm table, A axis -91 / + 121 degrees, Nwjdpfx Aezm Ticebzoi C axis, 360 degrees, Heidenhain TNC530, Spindle Speed 20,000rpm, 36kW Spindle Motor, HSK A63 Spindle Taper, 165 tools, swarf conveyor, through spindle coolant,