Used Imet Bs 300 Plus Gh for sale (20,893)

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input current: 50 A, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2017 Control system: IMSNC Oxy-fuel cutting table: 3000 x 1500 mm Extraction duct left / right Plasma source: Kjellberg HiFocus 161i, adjustable 10 - 160 A Power source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process control with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short circuit time during torch ignition, and power source • Operating status and error display via LED and screen • Analog and serial interfaces for adaptation to CNC controllers • Infinitely adjustable cutting current from 10 - 160 A and during marking from 5 - 25 A • Optimal piercing through infinitely variable delay time for the main arc and adjustable current rise • Adjustable current reduction for cornering, start, and end signals of the guidance system • Automatic display of the preset cutting current • Serial data transmission for PC-based diagnostics Plasma cutting technology: Contour Cut Iodpfx Ajy Nd Hyephjih • Further development of HiFocus technology for mild steel • Optimized for cutting fine internal and external contours • High cutting quality and contour accuracy • Holes with angular deviations according to DIN EN ISO 9013 range 2-4 • Minimal angular deviations and smooth cut surfaces • Excellent repeatability and dimensional accuracy • No tedious post-processing – high productivity and low costs • No additional equipment, software, or new consumables required • Standard equipment Plasma torch PerCut 200/210 • PerCut 200 plasma machine torch for standard applications and high-precision bevel cutting • Quick-change PerCut 210 torch with threaded lock for quick and convenient tool swapping • Special torches available for special applications • Higher cutting speeds reduce cost per meter • Long service life of consumables conserves resources • Narrower kerf means fewer emissions and less waste • Significantly lower gas consumption compared to competitors thanks to efficient liquid cooling up to the nozzle tip • Lower noise levels due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Power source HiFocus 161i Power supply: 400 V; 3 Ph; 50 Hz Max. power input: 28 kVA (100% duty cycle) Main fuse, slow-blow: 50 A Protection class: IP22 Open circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range: Max. 50 mm Recommended: 0.5 – 38 mm Max. piercing thickness: 30 mm Weight: 206 kg Plasma machine torch PerCut 200 Quick-change torch PerCut 210 Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, Air, N2/H2 (F5)

Condition: good (used), Year of construction: 2019, functionality: fully functional, Metal band saw EM BS 350 DGHF with base frame Iodswxad Tepfx Aphoih

Condition: new, Year of construction: 2026, LAB 300 PLUS F 16 TERSA - Universal combination machine with aluminum sliding table and three milling speeds for sawing, milling, planing/thicknessing, and optional mortising torsion-resistant steel cast iron construction machine table made of cast iron, hardened and ground easy-running, anodized aluminum sliding table, 10-year warranty on wear of guide rails large fence system with extendable aluminum telescope fence and folding stops with combination saw fence with 45° quick adjustment max. saw blade diameter 315 mm with optional scoring unit, pivotable from 90°-45° helical steel feed roller for consistent wood feed during thicknessing four milling speeds, manually adjustable standard with right/left rotation of the milling spindle three independent motors for each working unit Scope of delivery: Combination fence/parallel fence Arc milling guard Tersa cutterhead Anodized aluminum sliding table Aluminum fence cheeks Folding stops Eccentric clamping arm Model LAB 300 PLUS F 16 Tersa Item No. 5500314 Technical data ---Technical data circular saw--- Fence length 1600 mm max. saw blade diameter with scoring 315 mm max. cutting height at 90° / 45° 100/79 mm max. ripping width to the left of the saw blade 1660 mm Cutting width on the parallel fence 800 mm Saw arbor speed 3500 rpm Saw blade inclination 90° - 45° ---Technical data planer--- Working width 300 mm Planer table length 1260 mm Cutterhead speed Cutterhead diameter / number of planer knives 72 mm / 3 pcs ---Technical data thicknesser--- Table dimensions 300 x 450 mm min. / max. working height 3 mm / 220 mm max. chip removal 4 mm Feed rate 7 m/min ---Technical data table saw--- Usable spindle length 100 mm max. tool diameter 180 mm, can be recessed max. tenon tool diameter 275 mm max. tool diameter, can be recessed 140 mm Spindle speed 3500/600/800 rpm Spindle diameter 30 mm Motor power 400 V / 50 Hz / S6 - 40% 4 kW (5.5 hp) S6 40% Weight 430 kg Dust extraction port diameter 4 x 120 mm Dust extraction port diameter saw blade guard 60 mm Sliding table with ball bearing system equipped with a proven ball bearing system permanently easy-running thanks to hardened and ground guides not susceptible to dust and dirt due to minimal contact point between the ball and the trapezoidal rail 10-year HolzKraft warranty on wear of the carbide guide rails Dust extraction hose connection The dust extraction ports of the planer (1) and thicknesser (2) point in the same direction. The dust extraction hose can therefore be connected to the machine from the same side for both types of planing. You do not need a hose that goes around the machine. Planing units helical steel feed rollers for a constant and even wood feed Isdocnxa Njpfx Aphoih massive anti-kickback devices prevent the workpiece from kicking back 3-knife cutterhead ensures an optimal planing result

Condition: excellent (used), Year of construction: 2016, Siemens 840 SL control, twin spindle, 20,000 rpm, HSK 63, 2 x 32 tool positions, internal coolant supply at 30 bar, X 550 mm, Y 400 mm, Z 400 mm, direct measuring system, workpiece changer, laser control, Knoll coolant system, fixture flushing system, central lubrication system, automatic loading doors, year of manufacture 2016. Iijdszb D Rnopfx Apheh

Condition: like new (used), functionality: fully functional, Year of construction: 2019, operating hours: 250 h, machine/vehicle number: 0131, control type: NC control, degree of automation: semi-automatic, actuation type: hydraulic, pipe diameter (max.): 48 mm, pipe length (max.): 3,000 mm, tube wall thickness (max.): 4 mm, bending angle (max.): 180 °, overall weight: 670 kg, input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 1, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, T U B O M A T – simply smart. TUB-C G3001 The tube bending machine is ideally suited for single parts and small series production. The software allows individual tubes to be parameterized, simulated, and saved. Bending data is then transmitted to the machine via network (LAN). Standard bending equipment - Electronic Siemens SIMATIC control system - Function selection and operation via 4.3-inch touch panel - Familiar 4-fold preselection of bending angles or program mode - 80 memory locations for up to 10 sets - Actual/target value display for bending angles Isdsx E Rdwspfx Aphsih - Compact, forward-positioned bending head - Optimized tooling concept - Hydraulic bending drive, operated via proven hand lever - Hydraulic tube clamping - Hydraulic pressure die actuation - Hydraulic mandrel extraction - Mobile use possible - Saw unit for optimal right-angle cuts - Deburring unit for internal and external deburring - Universal base holder as drive unit for assembly attachments Technical Data - Tube capacity up to: 48.3 x 3.25 mm (E235, Rm = 2 x D) - Bending radius up to: 125 mm - Control: electronic - Max. bending angle: 180° (+10° overbend) - Bending accuracy: ±0.2° - Bending speed: 20°/s - Dimensions L/W/H: 3880 / 800 / 1250 mm - Weight: approx. 700 kg - Power: 2.4 kW - Electrical connection: 400 V / 50 Hz / 3 phase - Power supply requirements: CEE 16 A - Colour: RAL 9006 / 7021 / 5015 Software (Windows 11) PIPEFAB 4.0 BE Basic tube bending software package - Oracle Express database for single-user application - Creation of isometries (single tube) - ConCSVImp – import interface for CSV format - Calculation of bending data taking springback, elongation, and spring-in into account - Checking of clamping lengths, start and end lengths - Output of bending data (printout) - BendSim – bending simulation and graphical representation via parametric tool design - BendCon – creation and transfer of NC bending data for TUBOMAT - Data transfer via LAN Tool holders 1 set of adapters for bending rollers with 25 mm bore 1 clamping piece adapter installation space 100 mm 1 support for fixed pressure die installation space 100 mm Tools Bending tools consisting of bending roller, clamping piece, and pressure die (fixed) Tube diameters / Bending radii - Ø8.0 mm R=20 mm - Ø10.0 mm R=20.5 mm - Ø12.0 mm R=24.0 mm - Ø15.0 mm R=30.0 mm - Ø16.0 mm R=32.0 mm - Ø18.0 mm R=36.0 mm - Ø20.0 mm R=40.0 mm - Ø22.0 mm R=44.0 mm Mandrels 3000 mm for steel tubes Design with lubrication channel for minimal quantity lubrication (MQL) - 18.0 mm x wall thickness - 20.0 mm x wall thickness - 22.0 mm x wall thickness Pre-assembly studs for cutting ring fittings (L = light, S = heavy design) Tube Ø - 6 mm L - 6 mm S - 8 mm L - 8 mm S - 10 mm L - 10 mm S - 12 mm L - 12 mm S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Back-up plates for cutting ring pre-assembly with automatic pressure adjustment for steel and stainless steel tubes Tube Ø - 6 mm L + S - 8 mm L + S - 10 mm L + S - 12 mm L + S - 15 mm - 16 mm - 18 mm - 20 mm - 22 mm Other tube diameters and wall thicknesses possible. The machine is used but in like-new condition. The machine can be inspected and demonstrated by prior arrangement. The machine must be collected from our premises but can be loaded by us. Commercial sale. Price plus 19% VAT. Subject to prior sale and errors.

Condition: like new (used), Year of construction: 2005, Retrofitted: 2026 Numerical control: HEIDENHAIN TNC-530 Iisdpjy Az H Dofx Aphsh Technical features Dimensions Table dimensions: 2500 x 2000 mmTable construction: Continuous rotation with a hydraulic breakNumber of T slots: 9T slots dimensions: 22 mm Traverses of axis X axis traverse: 3000 mmY axis traverse: 1500 mmZ axis traverse: 1300 mmVertical capacity (VC): -5 / 1295 Milling head Auto-indexing Orthogonal 90º - Bodies B C (1º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)   /   Pull stud: DIN 69872Speed range: 20 - 5000 rpmSpindle power: 30 kW Feedrates Rapid feedrate (X / Y,Z): 20000 mm/min Weight and dimensions Machine weight approximate: 39000 kgMaximum weight on table: 13000 kgMachine dimensions approximate: 7980 x 8000 x 3750 mm Accessories Guarding: Peripheral without roofAutomatic tool changer: ATC-60Chip conveyor: 1 rear longitudinalElectronic handwheel: HR-410Coolant: External internal high-pressure coolant through spindleCoolant filter: Paper strip filter Sale conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features

Condition: new, Year of construction: 2024, load capacity: 300 kg, Equipment: foot remote control, rotational speed infinitely variable, Protec KT 300 H welding turntable, 170/400 special version Horizontal load 300 kg, tilted 150 kg Isdpsvbrqxefx Aphsih Power consumption 220 V, 50 Hz Table diameter 450mm Hollow shaft diameter 170mm Table height 500mm Welding current transmission 400 A Quick-action chuck diameter 300mm, surcharge 550.-€ Quick-action chuck diameter 400mm, surcharge 750.-€ Crank gear motor 0 - 90° stepless adjustment Infinitely variable speed 0.01 to approx. 5 rpm. incl. foot remote control Digital display with welding time limiter (if required)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, operating hours: 20 h, Well-maintained and fully functional wide belt sander, manufactured in 2020. Manufacturer: Holzkraft Model: LBSM 3005 ESE Year: 2020 Working width: 300 cm. Electric height adjustment. Iedjz S Ufbopfx Apheih The wide belt sander is in perfect condition, both visually and technically, and has been used very little. The machine can, of course, be inspected and thoroughly tested while powered on. The sale is to commercial businesses only and excludes any liability for material defects. No guarantee, warranty, or right of return.

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,700 mm, travel distance Z-axis: 1,500 mm, Heidenhain 530 Diagonal milling head with 2.5° x 2.5° indexing Spindle speed up to 6,000 rpm Tool holder SK50 Iiodpfxex I A Hvs Aphoh Internal cooling with 36 bar Longitudinal chip conveyor + cross conveyor

Condition: used, Year of construction: 2023, functionality: fully functional, We are selling a bandsaw, Berg & Schmid GBS 242 DG HA-I, with a cutting speed of 25-90 m/min. The following equipment is included with the purchase: - Micro-spray system SET GBS 242, including spray nozzle, fluid reservoir, and 24V Plus mounting bracket. Ijdpfsz Dnq Hox Aphoih - Infeed roller conveyor, left side. - Infeed/outfeed adapter for URB 290/400, connection piece for the machine. - URB 290 universal roller conveyor, length 4000 mm. - Roller conveyor extension for miter angles up to 45°, extending to the left (infeed). - Outfeed roller conveyor, right side. - Infeed/outfeed adapter for URB 290/400, connection piece for the machine. - URB 290 universal roller conveyor, length 4000 mm. - Roller conveyor extension for miter angles up to 60°, extending to the right (infeed). - LM 55 DH/manual digital length stop, measuring length 4000 mm, including connection to the saw.

Condition: used, Year of construction: 1979, workpiece diameter 320 mm Iiedpfx Ast Hwnpsphjh threading length 300 mm thread pitch mm total power requirement 90 kW weight of the machine ca. 12000 kg dimensions of the machine ca. m Thread and worm grinder for steering worms

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m • Cut detector Isdpfx Aexz Dqmspheih • Swivelling control panel • Micro-spray device • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), Description - DOCUMENTS AND MANUALS INCLUDED WE ORGANIZE SHIPPING AS WELL Max. concentricity errors at 300 mm: 0.008 mm RS232 / USB : interface Specifications Manufacturer TRIMOS Model Optima 300 Condition Used Stock Number 0071 Measuring range diameter (x) 310 mm Application range height (z) 320 mm Weight 90 Kg Max. tolerated errors (mechanical) 0.003 mm Max. tolerated errors (vision system) 0.005 mm Ijdpfovkplrex Aphsih Max. radius measurements < 5% - Max. angle measurements errors < 0.2° Max. concentricity errors adapter 0.002 mm Max. resolution 0.001 mm Max. manual moving speed 1 m/s

Year of construction: 2018, condition: excellent (used), bestehend aus zwei Stück Zahnriemenachsen EGC-80-1300-BS-10P-KF-0H-ML-GK und vier Stück Linearführungsschienen HGR 20C 1705V9-10A00 mit HIWIM Linearblock HGW CCC 170 3W3-10200 Iijdpeg Ixumefx Apheh Zwei Unimotore 075E3C300BACAA075140 mit Zwei EMERSON UNIDRIVE M 701-3200050A

Condition: used, Year of construction: 2008, x-travel 500 mm y-travel 560 mm z-travel 500 mm Control Matsuura G-Tech 30i max. turning speeds 20.000 min/-1 number of tool places 210 Pos. total power requirement 52 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features: - 5-pallet changer - new spindle including ceramic ball bearings - new spindle cooler Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved. Iisdpfeyigalsx Aphjh

Condition: excellent (used), Year of construction: 2007, ILAPAK DELTA 3000 LDR B SX | Flowpack packaging machine (Horizontal packaging line) Manufacturer: ILAPAK International S.A. Model / Type: DELTA 3000 LDR B SX Serial number: D.230.04.061 Year of manufacture: 09/2007 Power supply: 400 V / 50/60 Hz / 3 phases Power: 7500 W Width of infeed belt: 300 mm Dimensions of sealing area: Iodpfx Apey Umlvshsih Seal length: 400 mm Seal width: 400 mm Overall dimensions: 4000 x 1450 x 1950 mm Markem-Imaje laser printer FUME EXTRACTION AND FILTRATION SYSTEM Brand: BOFA International Ltd Model / Type: ES400i Serial number: 06/07/ES400i-771 Year of manufacture: 06/2007 Power supply: 220-240 V / 50/60 Hz Rated current: 6.20 A Dimensions: 720 x 440 x 800 mm Compatible filter cartridges: 0695916 & 10001304 Machine is incomplete The Ilapak Delta 3000 industrial flowpack is one of the most highly regarded horizontal HFFS (Horizontal Form Fill Seal) packaging machines on the market, designed for continuous operation at high production rates. Machines in the Delta 3000 series are characterized by a design based on multi-axis servo drive technology, which allows for precise control of the film feeding process, product positioning, and cutting of finished packages. The LDR version with bottom film feeding is an ideal solution for packaging products with irregular shapes, sticky or easily deformable products (e.g., fresh meat, cheeses, bakery products with or without trays, medical products). The unit presented here was factory-integrated with an advanced laser marking system from Markem-Imaje. The use of a laser coder allows for contactless, permanent and extremely aesthetic application of expiration dates, batch numbers or barcodes directly onto the packaging film during its unwinding, without the need for costly thermal transfer ribbons or ink. To ensure complete operator safety and a clean working environment, the set includes a dedicated, high-performance BOFA ES400i extraction system. The task of this device is to immediately suck up and neutralize the smoke and microscopic particles generated during laser ablation of the film structure, protecting the operators' lungs and the laser optics from contamination.

Condition: new, 300 mm Iiedpfxoxfwbts Apheh 300 mm 300 x 260 mm saw band length 3920 x 34 x 1,1 mm table height 780 mm band speed 20 - 100 m/min total power requirement 3,7 kW weight of the machine ca. 1,65 t dimensions 2,0 x 2,05 x 1,7 m Unused display machine!!!! 2-column high-performance automatic band saw from the SBS series • Modern SNC 20 control system for CNC models • Frequency-controlled saw drive • Work light • Powered chip brush • Hydraulic band tensioning • Clamping pressure adjustment • Double vise (before and after the band) • Creep speed for positioning • Bundle tensioning, electrically and hydraulically prepared • Chip conveyor The SNC 20 control system allows for convenient and uncomplicated input of up to 20 different sawing tasks (length and quantity). When the target dimension is entered, the control system automatically calculates the saw waste and the number of feeds. In addition, the error code display system provides quick analysis for troubleshooting. Including band path detection (1800 EUR)

Condition: ready for operation (used), Year of construction: 1997, operating hours: 19,000 h, travel distance X-axis: 500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 480 mm, controller manufacturer: MATSUURA, controller model: G-Tech 18i, spindle speed (max.): 15,000 rpm, number of slots in tool magazine: 80, number of axes: 3, This 3-axis Matsuura H.PLUS-300 was manufactured in 1997. It features a maximum spindle speed of 15,000 rpm and impressive travels of 500 mm in both the X and Y axes, with a Z-axis travel of 480 mm. The machine is equipped with an automatic tool changer that holds 80 tools and includes coolant in the spindle. If you are looking to get high-quality machining capabilities, consider the Matsuura H.PLUS-300 horizontal machining centre. Contact us for further details. Iedpfxoz Tzrwj Aphoih • Through-spindle coolant • Tool setter Technical Specification Taper Size ISO 40

Condition: ready for operation (used), Festo 559342 / EGSL-BS-75-300-20P mini slide, used, in good condition, 100% fully functional, delivery as shown in the photos. Iodpsx Erlpofx Aphoih

Condition: used, Year of construction: 2005, functionality: fully functional, overall weight: 250 kg, volume flow: 300 m³/h, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Vacuum pump, Rietschle SMV 300m3/h, 0.2bar /ct1928/ Manufacture: Rietschle Thomas (DE) Type: SMV 300 Year of manufacture: 1998 Operating pressure: 200Mbar Motor: 7.5 KW Capacity: 300 m3/h Iijdpfxst A Ukas Aphjh Power: 7.5 KW, 690/400 Volt Inlet: diameter 60mm Spout opening: diameter 38mm

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, travel distance X-axis: 2,000 mm, travel distance Y-axis: 685 mm, travel distance Z-axis: 630 mm, controller model: Siemens 840D, rotational speed (max.): 20,000 rpm, The machine spindle was replaced in 2022! The original purchase price of the machine was EUR 600,000! TECHNICAL DETAILS Travel range X-axis: 2000 mm Travel range Y-axis: 685 mm Iedpfjymnykjx Aphjih Travel range Z-axis: 630 mm Rapid traverse on all axes: 40 m/min Axis acceleration: 0.25 g Max. spindle speed: 20,000 rpm Max. rotary table speed: 1,000 rpm Tool changer positions: 92 Tool holder: HSK 63 NC swiveling axis: ± 100° MACHINE DETAILS Control: Siemens 840D EQUIPMENT Remote diagnostics and teleservice Maintenance instructions displayed on screen 5-axis milling package Fixed table with integrated rotary table Kessler milling rotary table DTE 520 NC swiveling head with spindle stock Direct measuring systems Chip conveyor (hinged belt) Coolant system HL 450 / 900 (IKZ) Full-flow cleaning via paper band hydrostatic filter HL450 Coolant filtration 50 µm nominal Chip blow gun Coolant recooling unit Additional tray rinsing Machine preparation for air through spindle Work area extraction system Safety package MILL 2000 with reinforced cabin and safety glass Zero point clamping system NSL tur 570-5-Z for DTE 520 Tool breakage monitoring Measuring probe Renishaw OMP 40-2LS Rotating inspection window Chiron Power Service Siemens CNC control with OP019 19" color display Operating mode: 4 MCIS DNC for sending and receiving CNC programs in network operation Siemens tool life monitoring Measurement in JOG (zero point determination during setup in jog mode) Loading and unloading station for tools for main time parallel tool change on background magazine Additional window for background magazine Swiveling control panel for optimal visibility of the work area during setup Note: The two vices on the NC rotary table as well as the tool holders in the tool changer are not included in the offer.

Condition: used, Year of construction: 2007, functionality: limited functionality, saw blade diameter: 370 mm, total length: 810 mm, total height: 1,850 mm, total width: 1,020 mm, overall weight: 390 kg, saw blade speed: 15 rpm, working height: 925 mm, For sale is a professional vertical circular saw, IMET Sirio 370. Ideal for daily use in workshops and metalworking shops. Important note regarding the condition: The saw runs and cuts perfectly at the first speed setting (15 RPM). The second speed setting is currently not functioning (presumably a problem with the switch or motor). Iijdpfoz D Slnex Apheh A used saw blade and a new saw blade are included.

Condition: excellent (used), For sale: a professional Telestream PRISM MPS-300, designed for monitoring, analyzing, and controlling SDI/IP video signals in broadcast applications and professional AV systems. The unit has been inspected and is in working condition. It powers on correctly, and the touchscreen functions properly. The condition of the unit is visible in the photos. The photos show, among other things, a functioning 12G UHD SDI generator during testing – 3840 × 2160 / 59.94 Hz. Model: Telestream PRISM MPS-300 Serial number: MPS-300 S011149 Software version: 3.5.2 Selected connectors and features: SDI inputs: SDI1 / SDI2 SDI I/O: SDI3 / SDI4 10/25GE interface REF IN / REF OUT AUX OUT DisplayPort GPIO Ethernet LAN USB Headphone output Support for professional UHD/12G SDI signals Built-in touchscreen Portable design with handle Power supply: 100–240 V AC, 50/60 Hz. The set also includes the professional RF/SDI cables shown in the photos, including Amphenol RF cables. The equipment comes from a professional application. The housing may have normal signs of use and storage. Iedpjz Snx Uofx Aphsih The scope of sale is exactly as shown in the photos.

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 3214, functionality: fully functional, workpiece height (max.): 40 mm, feed rate X-axis: 10 m/min, total height: 1,600 mm, total length: 3,700 mm, total width: 1,445 mm, overall weight: 1,080 kg, TECHNICAL DETAILS Feed speed: 10 m/min Panel thickness: 8 - 40 mm Max. edge thickness: 3 mm MACHINE DETAILS Operating length: approx. 100,000 m Dimensions & Weight Dimensions (L x W x H): 3,700 x 1,445 x 1,600 mm Weight: 1,080 kg EQUIPMENT/FEATURES PLC control including touchscreen Power stop/trimming knife Jointing unit with DIA milling tools Application of hot melt adhesive to workpiece Robust chain drive Upper operator panel, rapid adjustment from operator side Double roller pressure Signal lamp for workpiece feed Quick-heating glue pot, maintenance-free Pneumatic end trimming for edge thicknesses up to 3 mm High-frequency crosscut saw High-frequency milling unit with replaceable cutter heads Iodpey Hih Rjfx Apheih For radius, straight and chamfer milling Workpiece air blower Integrated collection container for edge material offcuts Extendable support arm on the front side Note: The machine can still be inspected under power until the middle of calendar week 19.

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Overhauled BRUDERER BSTA300 automatic punching press incl. new press control unit Technical data: ----- Tonnage 300KN Die installation opening 750mm Iisdpfjtvnlbox Apheh Stroke rate 80-1400 (depending on selected stroke) Adjustment stroke 13, 16,19,25,32,38,44,47 Plunger adjustment range 51mm Tool installation height 171-239 mm (depending on the selected stroke) Clamping plate 740x480mm Ram area 630x360mm Belt passage width 206mm Base plate opening 710x160mm Belt infeed height 50-120mm Belt direction left to right Feed Servo feed Machine weight approx. 5150 kg Machine color RAL 1013 pearl white Color attachments RAL 7016 anthracite Control cabinet color RAL 7035 light grey