Used Keyence Xg-X2800 Ca-E200L for sale (10,232)

Condition: used, functionality: fully functional, Year of construction: 2020, total length: 950 mm, total height: 1,360 mm, total width: 700 mm, overall weight: 188 kg, feed length X-axis: 297 mm, feed length Y-axis: 210 mm, feed length Z-axis: 200 mm, We are offering this ready-to-use Keyence AGILISTA-3200W. All maintenance has been carried out by Keyence. A full service was recently performed by Keyence, and the printer has been in standby mode since. The printer is in excellent condition. Complete accessory set for immediate operation included: - 1x cartridge of print material - 1x cartridge of support material - 3x waste containers - 1x rinse tank for printed parts - Cleaning kit for parts and printer Viewing by appointment possible. On-site introduction/training available upon request. Technical specifications: - Print material: AR-M2 (transparent print material), AR-H1 (heat-resistant print material), AR-G1L (silicone rubber [low hardness]), AR-G1H (silicone rubber [high hardness]) - Support material: AR-S1 (water-soluble support material) - Build volume: 297 × 210 × 200 mm (DIN A4 size × 200 mm) - Resolution: 635 × 400 dpi Nsdpfx Asy Hmhhei Tewn - Layer thickness: High resolution AR-M2: 15 µm, standard resolution AR-M2: 20 µm, AR-H1: 20 µm, AR-G1L/H: 30 µm - Interface: Ethernet 10BASE-T / 100BASE-TX - Operation: color touch panel - Dimensions: 95 x 70 x 136 cm - Weight: 188 kg If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: used, Year of construction: 2021, functionality: fully functional, Equipment: type plate available, We are offering this used Keyence VHX-S750E measuring system, manufactured in 2021. Model: VHX-S750E Serial number: 8B120052 Nodpfoz Hipvox Ai Tewn Country of origin: Japan Features: • VHX-7000 camera head • Motorized stand • Control panel (Remote Console) • Integrated VHX monitor • Specimen stage • Standard lighting unit • Housing in good condition • No obvious damage 1. Software license available, but not accessible; no USB stick included. 2. No written proof of functionality; the microscope can be tested before purchase. 3. No additional lenses available. 4. No calibration certificates. 5. Manufactured around 2021; originally purchased as new. 6. Includes the original PC/controller in the scope of delivery. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2020, operating hours: 450 h, functionality: fully functional, total height: 400 mm, total width: 800 mm, total length: 800 mm, travel distance X-axis: 5,000 mm, travel distance Y-axis: 5,000 mm, travel distance Z-axis: 5,000 mm, overall weight: 50 kg, repeat accuracy: 0.01 mm, Equipment: documentation/manual, KEYENCE WM-3000 Mobile 3D Coordinate Measuring System, Year of Manufacture 2020 For sale is a mobile 3D coordinate measuring system, KEYENCE WM-3000, year of manufacture 2020. The WM-3000 enables flexible and precise 3D measurement of components directly in production or at a testing station. Thanks to the optical tracking technology and the wireless measuring probe, the system is particularly suitable for dimensional accuracy checks and for comparing the actual and target dimensions of complex components. Technical data: Manufacturer: KEYENCE Type: WM-3000 Year of manufacture: 2020 Mobile 3D coordinate measuring system Nedpfxjz Aynks Ai Tswn Measuring range: 5,000 mm Measuring accuracy: approx. ±28 µm Repeatability: up to approx. 10 µm Optical 3D measurement Wireless measuring probe Supply voltage: 220 V Weight: approx. 50 kg External dimensions: approx. 800 × 800 × 400 mm Suitable for: 3D dimensional inspection Quality control Actual vs. target comparisons Measurement of complex components Use directly in production The device is offered as used. Condition and scope of delivery, see photos or upon request. Subject to technical changes and errors.

Condition: excellent (used), We offer a professional optical 3D measurement system, KEYENCE VL series, designed for fast and precise scanning of technical components. Nwjdpjz Sllyjfx Ai Ton This set is ideal for quality control, reverse engineering, and non-contact measurements in industrial environments. Set includes: – Scanning head VL-370 Condition: Very good, well-maintained equipment Note: Set is sold without monitor / PC unit (option to equip according to your needs) Manufactured: Made in Japan

Year of construction: 2018, condition: ready for operation (used), This KEYENCE IM-7030T optical measurement machine was manufactured in 2018. It features a 10.4" LCD monitor, a double telecentric lens, and motorized XY and Z stages with a movement range of 200 × 100 mm and 75 mm respectively. It supports both wide-field and high-precision measurement modes, ensuring detailed and accurate measurements. Consider the opportunity to buy this KEYENCE IM-7030T optical measurement machine. Contact us for more information about this machine. • Controller: IM-7000 • Image pickup device: 1" 6.6 megapixel monochrome CMOS • Display: 10.4" LCD monitor (XGA 1024×768) • Light receiving lens: Double telecentric lens • Illumination system: Telecentric transmissive, top light, four-division multi-angle illumination (motorized), slit ring illumination (motorized) • Measurement modes: Wide-field, High-precision • Wide-field measurement area: 300 × 200 mm (quadangle R50) • High-precision measurement area: 225 × 125 mm • Minimum display unit: 0.1 µm • Measurement accuracy (wide-field, without stage move): ±1 µm • Measurement accuracy (high-precision, without stage move): ±0.5 µm • Measurement accuracy (wide-field, with stage move): ±2 µm • Measurement accuracy (high-precision, with stage move): ±1.5 µm • Linked measurement accuracy: ±(7 + 0.02L) µm (wide-field), ±(4 + 0.02L) µm (high-precision) • Measurable area (XY, stage): 90 × 90 mm • Maximum measurement depth: 30 mm • Light probe diameter: 3 mm • Measuring force: 0.015 N (light probe), 0.3 N (height measurement) • Repetition accuracy: ±2 µm • Measurement range (Z): 0–75 mm • Measuring position accuracy (XY): ±0.2 mm • Minimum display unit (height): 1 µm • Measurable area (XY) wide-field mode: 145 × 95 mm • Measurable area (XY) high-precision mode: 107.5 × 95 mm • XY stage: Motorized, movement range 200 × 100 mm, max load 5 kg • Z stage: Motorized, movement range 75 mm • External remote input: Non-voltage input (contact/solid-state) • External output: PhotoMOS, OK/NG/FAIL/MEAS, rated load 24 VDC, 0.5 A • Interface: LAN RJ-45 (10/100/1000BASE-T), USB 2.0 Series A (6 ports) Njdpfxex D E Nps Ai Tewn • Record storage: HDD 500 GB • Ambient temperature: +10 to +35°C • Relative humidity: 20–80% RH (no condensation) • Pollution degree: 2 • Over-voltage category: II • Power supply voltage: 100–240 V, 50/60 Hz • Weight head: 31 kg • Controller weight: ~8 kg

Condition: used, mileage: 638,000 km, power: 355 kW (482.67 HP), first registration: 05/2023, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, next inspection (TÜV): 05/2027, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total length: 11,000 mm, total width: 2,600 mm, total height: 4,000 mm, loading space length: 8,150 mm, loading space width: 2,500 mm, loading space height: 2,750 mm, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, soot filter, tail-lift, Information in English: DAF XG 480 FAR 6x2 50 cm³ Combination TRS Refrigeration, 2 rear doors, 6,000 km, in excellent condition. Body: Refrigerated and freezer unit, Ebo Rhoon Tail lift: 2,000 kg Dhollandia under-ride platform Refrigeration: TRS Carrier Iceland, electric, temperatures from -30 to +30 Date of first registration: ? 2023 TÜV (technical inspection): Mileage: 6,000 km Engine power: 355 kW (483 hp) 13-liter Transmission: AS-Tronic Wheelbase: 670 cm (axle 1 to 3), 530 cm (axle 1 to axle 2) Loading area dimensions (L x W x H): 815 x 250 x 275 cm (internal) Truck dimensions (L x W x H): 1110 x 260 x 400 cm (external) Unladen weight: 13,812 kg Payload: 14,188 kg Permissible total weight: 28,000 kg Maximum front axle load: 9,000 kg GCW (Gross Combination Weight): 50,000 kg Emission standard: Euro 6 E Suspension: Front - parabolic, rear - air suspension Axle configuration: 6x2 (FAR) Front tires: 385/65 R22.5 L50% R50% Continental Axle 2 tires: 295/80 R22.5 L80% R80% Continental Axle 3 tires: 385/65 R22.5 L40% R40% Continental Cab type: XG Extras: MX engine brake, auxiliary drive, climate control system, auxiliary air conditioning, auxiliary heater, 9-ton front axle, refrigerator, luxury radio, 2 air-suspended seats, 2 beds, 2 x 600-liter tanks, 130-liter AdBlue tank, lift axle (not a steering axle), predictive cruise control, B3 alarm system, wheelbase 530 mm (axle 1 to axle 2), rear overhang 2.90 m, 360° camera, 45° cooling, fully insulated body from Ebo Rhoon, 5 rails on ceiling and floor, 1 horizontal load securing rail, stainless steel bumper on body, LED lighting in body, TRS Iceland refrigeration with EcoDrive and start-stop function, 2,000 kg Dhollandia sliding rear door, pneumatic drawbar coupling, light and air connections, immediately available and ready for operation, complete maintenance history, etc. Can be delivered in combination with the following products: DRACO TIPPER EBO RHOON BOX TRS REFRIGERATED TRAILER 24 CC Body: Refrigerated/freezer unit, Martini EBO Rhoon Manufacturer and type of chassis: Draco MZS 218 Refrigeration: TRS Carrier Iceland including EcoDrive and start-stop system Date of first registration: 09 ? 2023 TÜV (technical inspection): - Dimensions (L x W x H): 760 x 250 x 290 cm (internal) Adjustable drawbar length: 40 cm Unladen weight: 6,930 kg Payload: 11,070 kg Permissible total weight: 18,000 kg Suspension: Air suspension Axle types: SAF axles with disc brakes Tail lift: Dhollandia 2,000 kg under-ride platform Tire size: 445/45 R19.5 Axle 1: L30% R30% Axle 2: L30% R30% Spare wheel for tipper trailer: 40% Additional equipment: Length-adjustable drawbar (40 cm), Dhollandia 2-ton tail lift, ABS, EBS, SAF axles with disc brakes, chassis with mount, wheel chocks, fully insulated EBO Rhoon, 5 stainless steel rails in floor and ceiling, 1 horizontal lashing rail in the side walls, TRS Iceland refrigeration with EcoDrive and start-stop system, temperatures from -30 °C to +30 °C (operation with 380 V or via the refrigeration unit of the tractor), attractive flat evaporator, various LED reversing lights, roadworthy, immediately available and ready for operation, suitable for 24-CC, 14-block or 18-Euro pallets, etc. Further information: * Payload: 14288 kg * Type | First axle: Continental R * Tire size | First axle: 385/65 R22.5 * Tire tread depth inner left | First axle: 50% * Tire tread depth inner right | First axle: 50% * Maximum axle load | First axle: 9000 kg Nwedpfx Aezuitgei Ton * Type | Second axle: Continent

Condition: good (used), Year of construction: 2022, Keyence VL-500 measuring head, VL-570 control unit, VL-500 device base, VL-550 optical 3D coordinate system scanner. Used, from a business liquidation. First purchased 03/2022. Technical data and information according to the manufacturer: 3D coordinate system control unit VL-500 Device base Keyence VL-550 3D measuring head Keyence 570 Measuring accuracy: ± 10µm according to VDI/VDE 2634 Part 3 Standard measuring mode: 4 million measuring points Fine measuring mode: 16 million measuring points Motorized rotary table: XY and 360° rotation Repeatability: 0.002mm Nedpfx Aioz H Sa Dj Tjwn Measuring accuracy: +- 0.01mm Max. workpiece weight: 50kg 3D scanner / laser scanner Without Keyence computer with Windows 11 and extensive evaluation software (GD&T) Without dongle Without monitor, keyboard and mouse Without manuals We recommend an inspection to avoid misunderstandings. Information without guarantee Information, details and technical data from the manufacturer. To prevent any misunderstandings regarding the condition of the item and the scope of the auction, we generally recommend an inspection BEFORE placing a bid! Further technical data can be requested from the manufacturer. Our business hours are from Monday to Friday between 8:30 am and 12:00 pm and 1:00 pm to 4:30 pm. During this time, inspections and collections are possible and desired AFTER prior appointment. Subject to prior sale, changes, errors and printing errors.

Year of construction: 2016, condition: ready for operation (used), This KEYENCE IM-6025 optical measurement machine was manufactured in 2016. It features a comprehensive set of components including a measuring head, control unit, glass plates, software, clamping device, glass scale, barcode scanner, lighting, and styli. Consider the opportunity to buy this KEYENCE IM-6025 optical measurement machine. Contact us for more information about this machine. Additional information • Measuring head with 200 × 200 mm measuring field • Multi-angle illumination with photoelectric sensor • Digital measuring projector • Control unit • AC power cable • Mouse and keyboard • Rotary unit (for IM-8000) • Glass plates • Clamping device Nsdpeyf Du Uofx Ai Town • Glass scale • Barcode scanner • Lighting • StyliOptional Accessories: • Test probe sets: 80 pcs, range 0.3–0.99 mm • Test probe sets with handles: 350 pcs, range 0.4–4 mm • Gauge sets: 800 pcs, range 4–12 mm • Limit plug gauges: 265 pcs, range 1–43 mm • Setting rings: 50 pcs, range 0.6–47 mm • Thread plug gauges: 170 pcs, range M1–M24 and various inch threads • Thread ring gauges: 265 pcs, range M1–M63 and various inch threads • Micrometers: 70 pcs, range 0–150 mm (analog and digital)Availability: • 2 units availableOptional: Comprehensive package of measuring instruments

Condition: used, mileage: 638,000 km, power: 355 kW (482.67 HP), first registration: 03/2023, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, next inspection (TÜV): 03/2027, color: white, gearing type: automatic, emission class: euro6, total length: 11,100 mm, total width: 2,600 mm, total height: 4,000 mm, loading space length: 8,150 mm, loading space width: 2,500 mm, loading space height: 2,750 mm, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, Information in English: DAF XG 480 FAR 6X2 50 CC COMBI TRS COOLING 2x VALVES CAMERAS EXCELLENT CONDITION Superstructure: Refrigerated/Freezer, Ebo Rhoon Tail lift: 2,000 kg Dhollandia under-mount tail lift Refrigeration: TRS Carrier Iceland, Electric, temperatures from -30 to +30 Date of first registration: 2026 APK (roadworthiness test): Mileage: 638,000 km Engine power: 355 kW (483 hp) 13 liters Transmission: AS-Tronic Wheelbase: 670 cm (axle 1 to 3), 530 cm (axle 1 to axle 2) Cargo box dimensions (lxbxh): 815 x 250 x 275 cm internal Truck dimensions (lxbxh): 1110 x 260 x 400 cm external Unladen weight: 13.9 kg Payload: 14,107 kg GVW (Gross Vehicle Weight): 28,000 kg Max. weight on front axle: 9,000 kg GCW (Gross Combination Weight): 50,000 kg Color: H3279 Emission standard: Euro 6 E Suspension: Front parabolic, rear air Axle configuration: 6X2 Front tires: 385/65 R22.5 L90% R90% Michelin Tires on axle 2: 295/80 R22.5 L70% R70% Michelin Tires on axle 3: 385/65 R22.5 L30% R30% Michelin Cab type: XG Extras: MX Engine Brake, Motor PTO, Air conditioning with climate control, Auxiliary air conditioning, Auxiliary heater, 9-ton front axle, Refrigerator, Luxury radio, 2x air-suspended seats, 2 beds, 2x 600-liter tanks, 130-liter AdBlue tank, Last axle is a lift axle (no steering axle), Predictive Cruise Control, Alarm B3, Wheelbase is 530 (axle 1 to axle 2), Rear overhang of 2.90 m, Side view camera, Rear view camera on the rear of the cargo box, Connection for camera on the trailer, 45-degree cooling, Fully insulated superstructure built by Ebo Rhoon, 5x rails against the ceiling and in the floor, 1x horizontal load-lock rail, Stainless steel bumper in the box, LED lighting in the box, TRS Iceland cooling with EcoDrive and start-stop, 2,000 kg Dhollandia under-mount tail lift, Pneumatic fifth wheel coupling, Light and air connections, Immediately available and ready for use, Truck has always had a maintenance contract with DAF dealer Blom Katwijk, Complete maintenance history available, etc., etc. Can be supplied in combination with: DRACO TRAILER EBO RHOON BODY TRS COOLING TAIL LIFT 24 CC Superstructure: Refrigerated/Freezer Martini EBO Rhoon Make and type of chassis: Draco MZS 218 Refrigeration: TRS Carrier Iceland incl. EcoDrive and start-stop system Date of first registration: 11-2022 APK (roadworthiness test): 11-2026 Dimensions (lxbxh): 760 x 250 x 290 cm internal Adjustable length of the triangle: 40 cm Unladen weight: 6,930 kg Payload: 11,070 kg GVW (Gross Vehicle Weight): 18,000 kg Suspension: Air suspension Types of axles: SAF axles with disc brakes Tail lift: Dhollandia 2,000 kg under-mount tail lift Tire size: 445/45 R19.5 Axle 1: L80% R80% Axle 2: L80% R80% Spare wheel for trailer: 100% Extras: Adjustable length triangle (40 cm), Dhollandia 2-ton tail lift, ABS, EBS, SAF axles with disc brakes, Chassis with crossmember reinforcement, Wheel chocks, Fully insulated EBO Rhoon, 5x stainless steel rails in floor and ceiling, 1x Horizontal securing rail in the side walls, TRS Iceland cooling with EcoDrive and start-stop system, temperatures from -30 to +30 (runs on 380V or on the truck's cooling system), Nice flat evaporator, Various LED reversing lights, Ferry-compatible, Immediately available and ready for use, Suitable for 24 CC, 14 pallet spaces Further information: * Payload: 14107 kg * Type | First axle: Michelin R * Tire size | First axle: 385/65 R22.5 * Tire tread depth inside left | First axle: 90% * Tire tread depth Nodozr Dfljpfx Ai Tjwn

Condition: used, functionality: fully functional, In this listing, you are purchasing a ‘Keyence XM-1200’ coordinate measuring machine Item for sale: 1x Keyence XM-1200 with the following accessories including the accessories shown in the photos Nodpfx Aijyrcx Ss Tewn Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). Packaging and dispatch: You are welcome to view the device during our business hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Year of construction: 2024, condition: ready for operation (used), Optical measurement machine manufactured in 2024. This KEYENCE VL 700 & VL770 features a blue LED measurement light source and operates on a power supply voltage of 100 to 240 VAC ±10%, 50/60 Hz. If you are looking to get high-quality optical measurement capabilities, consider the KEYENCE VL 700 & VL770 machine we have for sale. Contact us for further details. Nwjdpfezzxi Rjx Ai Ten - Measurement Unit Model: VL-770- Controller Model: VL-700- Year of Manufacture: 2024- Power Supply Voltage: 100 to 240 VAC ±10%, 50/60 Hz- Measurement Light Source: Blue LED

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, type of input current: AC, input voltage: 230 V, Equipment: documentation/manual, Keyence XM-C1000 Portable Coordinate Measuring Machine / Measurement System Manufacturer: Keyence Model: XM-C1000 Condition: Used, fully functional For sale is a used Keyence XM-C1000 measurement system for precise 3D coordinate measurement of components and assemblies. The system enables fast and reproducible measurements without complex programming and is ideal for quality assurance, incoming goods inspection, first article inspection, and production monitoring. The XM-C1000 impresses with its ease of use, high measurement accuracy, and flexible application possibilities. Measurements of distances, diameters, positions, angles, and geometric tolerances can be performed and documented efficiently. Technical features: Portable optical coordinate measuring system Precise 3D measurements Intuitive user interface Fast inspection processes Automatic measurement reports Ideal for production and quality assurance Condition: Used Fully functional Good optical condition Normal signs of wear and tear Inspection and functional testing possible by appointment Nwsdpjztzm Nofx Ai Ton Scope of delivery: Keyence XM-C1000 measurement system Existing accessories as shown in the picture Documentation

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 250 mm, measuring range Z-axis: 150 mm, Keyence XM-T2000 coordinate measuring system from 2021, in excellent and fully functional condition. Keyence XMM-1600 controller included. Additional accessories: Keyence case, dongle, user manual, and certificates. Measuring range: 300 mm × 250 mm × 150 mm Smallest display unit: Distance: 1 μm, Angle: 0.0001 degrees Nsdpsx H T H Dsfx Ai Town Measuring accuracy: Repeatability: ±3 μm, Measurement deviation: ±8 μm Maximum load capacity: 25 kg #8406

Condition: used, Year of construction: 2020, functionality: fully functional, Equipment: documentation/manual, type plate available, We are offering this used Keyence VL-500 optical 3D coordinate measuring machine, manufactured in 2020. Manufacturer: Keyence Corporation Model: VL-500 Country of origin: Japan Year of manufacture: 2020 Serial number: CC910026 System consists of: Control unit: VL-500 Base/object table: VL-530 Measuring head: VL-570 Nodpfx Aey Uw Dvsi Tewn Calibration plate Manuals Dongle PC Last calibration performed by the manufacturer in 11/2024. If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 2023, input voltage: 240 V, overall weight: 35 kg, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, Equipment: documentation/manual, We offer this used Keyence IM8030 measuring system, year of manufacture 2023. Manufacturer: Keyence Model: IM8030 Construction year: 2023 Nedpezzyaqefx Ai Town Condition: used Category ID: 404 Type ID: 2224 Type: measuring system If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand “Keyence VL-500” 3D co-ordinate measuring machine Items for sale: 1x Keyence VL-500 with the following features incl. software incl. VL-H2P add-on software incl. VL-H2G add-on software incl. laptop for operation incl. calibration plate Njdpfxez N Akgs Ai Tswn Ready for immediate use Condition: This listing is for a second-hand unit, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the unit during our opening hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Year of construction: 2021, condition: like new (used), Mobile 3D coordinate measuring machine Keyence WM-3000 Like new machine, sold because of new purchase Nedpfomrrb Sjx Ai Tewn Technical data available at manufacturers website Visit possible in 47877, Willich GERMANY

Condition: ready for operation (used), Year of construction: 2020, travel distance X-axis: 25,000 mm, CMM machine manufactured in 2020. This KEYENCE WM c3000 includes a measuring range of up to 25 m and operates within a temperature range of 0 to 40°C. The delivery scope features a camera tripod, laser scanner, handheld tactile probe unit, and various measuring tips. If you are looking to get high-quality measurement capabilities, consider the KEYENCE WM c3000 machine we have for sale. Contact us for further details. • Input Voltage: 24 V DC • Input Current: 1.7 A • Measuring Range: Up to 25 m • Operating Temperature Range: 0 to 40°C • Interface Ports: USB, Power Input • X-axis Travel: 25,000 mm • Y-axis Travel: 12,500 mm • Z-axis Travel: 12,500 mm • Measurement Volume: 25 m × 12.5 m × 12.5 m • Calibration Date: March 03, 2022 Scope of Delivery / Included Components: • Camera tripod with black carrying bag Nwjdpfx Ajzggw Toi Tsn • Stand / Base • Laser scanner (WM-P6200 compatible series) and handheld tactile probe unit in a heavy-duty rolling hard-shell transport case • Component accessory box with various measuring tips/styli • Position-tracking magnets for reference points and calibration • Power supply units (AC adapters) and connection cables • Calibration Certificate (2022) • Operating Manual – Short Version • Operating Manual – Full Version • Printed technical documentation / instruction manuals

Condition: excellent (used), For sale: Professional KEYENCE IM-7500 measuring system with IM-7020 head. The device is designed for fast and highly precise measurement of components in production and quality control. The equipment enables automatic measurement of multiple dimensions simultaneously using a camera. Ideal for CNC workshops, tool rooms, and industrial applications. Technical data Manufacturer: KEYENCE Nwedpoz Slu Iefx Ai Ton Model: IM-7500 Head: IM-7020 Type: Optical measuring system Country of origin: Japan Automatic measurement by camera High measurement accuracy Condition Used Fully functional Normal signs of use Included in the set KEYENCE IM-7500 unit IM-7020 head Monitor Control unit Keyboard and mouse Wiring

Condition: used, functionality: unexamined, Dear Sir or Madam, We hereby offer the following machine for sale: Keyence WM-6025 coordinate measuring machine. The machine is being sold with the equipment shown in the photographs and specified in the advertisement text. Nsdpfx Aijz Sxr Se Tewn Location: 40764 Langenfeld PLEASE NOTE! This equipment originates from an insolvency. We are auctioning it off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information regarding the current highest bid. Your bid becomes binding upon receipt by email. Please submit your binding bid by 10.00 on 3 November 2026. Once the auction has ended, you will be informed of the outcome within 72 hours.

Condition: used, functionality: fully functional, With this offer, you are purchasing a used “Keyence VHX-970F” digital microscope Items for sale: 1x Keyence VHX-970F with We can easily configure the machine to meet your specific needs. Please feel free to contact us! Condition: This listing is for a used device, which may show signs of use (minor scratches or discoloration). The unit has been tested to ensure it is in working order Packaging and Shipping: Nsdozpvdbspfx Ai Tjwn You are welcome to view the unit during our business hours. Please schedule an appointment! Seaworthy packaging and worldwide shipping are available upon request! A functional test will be recorded on video for you prior to shipping or pickup. For more information, please feel free to contact us directly.

Condition: used, functionality: fully functional, With this offer, you are purchasing a second-hand KEYENCE VL 350 3D measuring system. Item for sale: 1 x KEYENCE VL 350 We can easily configure the machine to your requirements. Please feel free to contact us! Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The unit has been tested to ensure it is in working order Nedpfxjzxqxfe Ai Tewn Packaging and dispatch: You are welcome to view the unit during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: used, functionality: fully functional, Dear Sir or Madam, We are pleased to offer the following piece of equipment for sale: Keyence IM-8010 coordinate measuring machine. The machine is being sold with the equipment shown in the photographs and specified in the advertisement text. Location: 40764 Langenfeld PLEASE NOTE! This equipment originates from an insolvency. We are auctioning it off to the highest bidder on behalf of the creditor/bank. Nodpjz Sxr Esfx Ai Tewn This is a closed auction. We do not provide any information regarding the current highest bid. Your bid becomes binding upon receipt by email. Please submit your binding bid by 10.00 on 3 November 2026. Once the auction has ended, you will be informed of the outcome within 72 hours.

Condition: excellent (used), Year of construction: 2020, Very well-maintained measuring system from Keyence. Nwsdpfxjxgq Amo Ai Ten Type: XM-M1200 (XM-C1000) with PC XM-1500 Year of manufacture: approx. 2020 #8385

Condition: used, functionality: unexamined, Dear Sir or Madam, We are pleased to offer the following piece of equipment for sale: Keyence VL-700 coordinate measuring machine. The machine is being sold with the equipment shown in the photographs and specified in the advertisement text. Location: 40764 Langenfeld PLEASE NOTE! This equipment originates from an insolvency. We are auctioning it off to the highest bidder on behalf of the creditor/bank. This is a closed auction. We do not provide any information regarding the current highest bid. Nwjdpfx Ajz Sxq Uei Tsn Your bid becomes binding upon receipt by email. Please submit your binding bid by 10.00 on 3 November 2026. Once the auction has ended, you will be informed of the outcome within 72 hours.