Used Kreisel Rotary Valve Dosing Valve for sale (10,189)

Condition: used, Dosing rotary valve, rotary valve, dosing lock, rotary valve for conveyor screw, transport screw, screw conveyor, conveyor technology, pipe conveyor screw -Manufacturer: Torex, 8-blade rotary valve with gear -Inlet opening: Ø 265 mm -Outlet: 250 x 245 mm -Transmission: Motovario i= 50 Klsdpfxjnzpyke Aarst -Drive shaft: see photos for dimensions -Dimensions: 540/410/H360 mm -Weight: 100 kg

Condition: good (used), Dosing rotary valve, rotary valve, dosing valve, rotary valve for screw conveyor, transport screw, screw conveyor, conveyor technology, tubular screw conveyor -Cell wheel lock. 6-blade, without drive -Type: Ecluse 400x400 -Inlet opening: 400 x 390 mm -Outlet: 400 x 280 mm Kodjwnn Aiepfx Aarelt -Shaft: Ø 30 x 105 mm -Dimensions: 620/500/H650 mm -Weight: 89 kg

Condition: used, Valve bag filler, valve filling and dosing machine Filling pipe diameter: 88.9 mm Kedpfxox Nztws Aarolt Motor power: 1.5 kW, 83 rpm Equipped with on/off button and emergency stop See our other listings VMA Wekerom

Condition: used, Stainless steel knife gate valve Diameter 150 mm Kledpfx Aajx Nykborjt Made entirely of stainless steel 2 units in stock See our other listings VMA Wekerom

Condition: new, Year of construction: 2025, Compact design Highest reliability High suction power Integrated pre-separator 100 % air recirculation Residual dust content < 0.1 mg/m³ Low noise emission Longer filter life Easy emptying Supplied ready to plug in With rotary valve Models with rotary valve: AL-KO POWER UNIT® 300 ZRS Intake port: 300 mm Nominal motor power: 7.5 kW / 3 Ph Voltage: 400 V / 50 Hz Maximum volume flow 4,900 m³ / h 6,000 m³ / h Nominal volume flow: 5.089 m³ / h Negative pressure: 2.280 Pa Filter area: 30 m² Filter cleaning: pneumatic Klsdohkzu Ajpfx Aarst Dimensions (L x W x H) in mm: 2,950 x 994 x 3,013 Cellular wheel capacity:15.816 L / h Weight:920 kg Location: ex stock 54634 Bitburg - immediately available - subject to prior sale

Condition: used, Die Flaschen, die durch eine Schraube selktionniert sind, sind dann auf dem rotierenden Karoussel, von einer Sterne geführt. Erster Gang : Degorgier : Die Flaschen sind erst vom Hals angegrifffen und die Körper der Flaschen sind dann von zuführenden Wege auf der schräg Stellung weiter geführt. Jeder Flaschen' Träger ist mit einem regelbaren Degorgier System und einem Daumen um Verlüste vom Wein zu vermeiden usgestattet. Zweiter Gang : Teil absaugen, bis zu 6 Centiliter (stehende Flasche). Dritter Gang : Dosierung der verschließen Flasche, gebracht zu 60 Grad schräg, Dosierung' s Kontrolle hoch und unter. Vierter Gang : Beifüllen (stehende Flaschen) vom Wein mit einer kleinen pneumatischen regelbaren Pompe um eine einwandfrei Füllung zu erleichten. Von starker und gepflegter Aufbau mit Rahmen und Gehäuse aus rostfrei Edelstahl von bester Qualität. Und der oberen Teil besteht aus dursichtigen Polycarbonate. Kjdpfjx Iv Uaex Aarjlt Grund Maschine geeignet für die Zuführung von 0.75 Liter, 0.375 Liter, Magnum (1.5 Liter) Sektflaschen, und auf Anfrage spezielle Flaschen. Leistung : Bis 1 500 Fl/St m.electron. Variator Motor : 0.55 Kw Masse : Tiefe : 1630 mm / Breite : 1600 mm Gewicht : 550 Kg

Year of construction: 2008, condition: new, Type: XZF / QA90L4A Serial number: Kledpfeizz D Tex Aaret Power: 0.33 MPa / 1.5 kW Speed: / 1.390 rpm Diameter top: Weight: 210 kg Dimensions: mm Condition: unused

Condition: used, Year of construction: 2006, functionality: fully functional, 2 pieces rotary valve dosing feeders ! Price per unit ! Manufacturer: Torex Model: RV20 Connection size inlet/outlet: 300 x 300 mm Overall height: 455 mm Sealing strips made of rubber Bolted plastic lining of the individual compartments for improved discharge. Functionality has been checked! Bearings can be relubricated from the outside. Last used for dosing hydrated lime. Drive power: 1.5 kW Kljdpfxexd Dukj Aarjt Speed: 30.9 rpm

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, volume flow: 75 m³/h, overall weight: 1,250 kg, inner dimension width: 500 mm, total length: 2,150 mm, total width: 900 mm, total height: 800 mm, type of input current: three-phase, input voltage: 400 V, rotational speed (max.): 14 rpm, torque: 2,750 Nm, 3 pieces of rotary valve Rotary valve Manufacturer Kreisel Type: ADG 630x800-11 LUG Version with explosion protection: Ex II1D /3DGc-20°C / +60°C Inlet and outlet internal dimensions: 500 x 800 mm Height 800 mm, Housing made of material: 1.4571 Rotary valve Ø 630 made of material 1.4571 with side discs and 12 chambers, Wear/sealing strips made of spring steel C60G (0.0601 / hardened), adjustable, reversible and replaceable via inlet and outlet, external roller bearing, sealing of the shaft feedthroughs in the housing using adjustable and relubricable stuffing box packings, shaft protection sleeves, incl. Switching flag with 4 pulses/rev and protective cover, bearing shields with purge air connections, console for flange gear motor (lantern), drive via elastic coupling and gear motor, theoretical delivery capacity at 100% filling and 14 rpm: 1.25 m³/min (75 m³/h) Vibrator: Manufacturer Netter. Drive: electric Power: 0.11 kW Centrifugal force: 627 Newtons Total weight including gear motor: 1250 kg Overall dimensions: Length: 2150 mm Width: 900 mm Height: 800 mm Kjdpfx Aajvzk Sherelt Gear motor Motor data: SEW RF97 AM112 M2BA112M4 Voltage: 400 volts Power: 4.0 kW, Speed: 14 rpm

Year of construction: 2015, condition: excellent (used), Rotary valve: JKF type:B-500S (dosing/mixing unit - 3 Pcs.) Kljdpfjumkm Sex Aarjt Device for dosing/mixing EPS polystyrene granulate and regranulate or other similar products. Rotary valves type B-S are fitted with an 8-bladed rotor with hard-wearing rubber blades bolted to the rotor shaft plate profiles. The rotor is separated from the rotor housing by felt ring. The shaft is suspended on bearings and connected directly to the gear motor. The rotor is made of 2 mm plate. Year of production: 2008, 2008, 2015

Condition: good (used), Table size:1500x1500mm Kjdpfx Aofvqmxjarelt Capacity : 6t Dimension: 1600x2500x2000mm Hydraulic

Condition: good (used), Revent Single Rack Oven Rotary Rack Oven Kedpfx Aaeyw T D Derelt Complete with one mobile oven rack In good working condition

Condition: like new (used), Year of construction: 2022, Reda STERILDOSE aseptic dosing unit Can be used as aseptic doser for dosing of any components into milk, juice and other beverages products Capacity: 3000 l/h New condition Dimensions LxWxH: 2650x1800x2230mm Kodjyil A Sopfx Aarolt

Condition: like new (used), Year of construction: 2013, Manufacturer: Kaeser Kompressoren, Germany YOM 2013 Maximum Pressure: Up to 13 Bar Productivity 8.26 cubic meters/min Energy Efficiency: The direct drive coupled with IE4 efficiency motors (or IE5 on SFC models) ensures superior energy efficiency. Low Maintenance: Components are designed for long service life, with easy access for maintenance. SIGMA Control 2: Ensures efficient monitoring and control of the compressor. Rotary compressor type Screw by lubrication Oil Noise level 70 dB Height 1900 mm Length 1110 mm Klsdoyy U Shepfx Aaret Width 1760 mm Weight 1250 kg Electrical parameters Mains voltage 380~400 V Power consumption 45 W Current frequency 50 Hz User characteristics Compressor cooling system Water cooling is possible, with subsequent use of heat. Complete system ready to use fully automatic extremely effective sound insulation vibration insulation powder-coated housing parts for ambient temperatures up to +45°C easy maintenance: lubrication nipples for motor bearings are located on the outside (also for fan motor).

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, total length: 4,200 mm, total width: 1,300 mm, total height: 1,800 mm, overall weight: 1,150 kg, input voltage: 400 V, Cup filling and sealing machine Kedpfx Ajvz H N Nearslt Brand: Food Dosing Packing Machines SP. Z.O.O. Type: DOSOWNIK 2G, Number: 439, Year of construction: 2014, Voltage: 400 V, 3 Ph, Power: 2.5 kW, Pressure: 6-8 bar, Weight: 1150 kg, Dimensions: 4200 mm x 1300 mm x 1800 mm.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, total length: 4,900 mm, total width: 1,500 mm, total height: 2,300 mm, overall weight: 1,500 kg, input voltage: 400 V, Cup filling and sealing machine Brand: Food Dosing Packing Machines SP. Z.O.O., Type: PAK 5.0, Machine number: 457, Year of construction: 2015, Voltage 400 V, 3 Ph, Power 7.5 kW, Pressure 6-8 bar, Weight: 1500 kg, 2-track cup denester, Kodpfx Asv Abm Eearelt Dimensions: 4900 mm x 1500 mm x 2300 mm.

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD - SPA - class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine   Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weigher   Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and - tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Kodex R Dh Hspfx Aarelt Maximum dose (estimate): 500 g   Memory for 800 different dosing recipes Trigger: foot pedal Results retrieved on USB key, and analysed in Excel. Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V - single-phase Doser / control box connection: direct   Materials in contact with the ingredient : 304L electro-polished stainless steel. Construction according to GMP rules Machine dimensions: 95 x 75 x H 170 cm Documentation available

Condition: used, Year of construction: 2014, Manufacturer : MCPI Fine dosing Model: OPTI-FEEDER FD - SPA - class 2A Year : 2014 Type : Micro dosing machine / Precision dosing machine   Type of product : powder / granules, dry form Type of dosing : weight by batch in gravimetric mode Weight measurement chain : Weighing scale / Precision weigher   Hopper: 2 litres Filling of doser storage hopper: Manual Electronic weighing control and management Extractor outlet cross-section: 80 mm Dosing sequence: 3 dosing speeds (coarse, medium and fine) to optimise the precision / dosing speed ratio Dosing quality monitoring (+ and - tolerance interval) Scale measurement resolution: 10 mg (0.01 g) Minimum dose (estimate): 250 mg Maximum dose (estimate): 500 g   Memory for 800 different dosing recipes Trigger: hand sensor Results retrieved on USB key, and analysed in Excel. Kjdsx R Df Sspfx Aarjlt Control unit: Unit built to CE standards. All control and command elements are integrated into this box (controller, PLC, drive, safety devices, switches, etc.). Power supply: 220V - single-phase Doser / control box connection: direct   Materials in contact with the ingredient : 304L electro-polished stainless steel. Construction according to GMP rules   Manual electric screwdriver Machine dimensions: 95 x 75 x H 170 cm Documentation available

Condition: new, Year of construction: 2026, functionality: fully functional, power: 11 kW (14.96 HP), A triple pass rotary drum dryer is a type of industrial dryer that is used to reduce or remove moisture from a material. It gets its name from the three rotating drums through which the material passes, each with a different purpose in the drying process. This type of dryer is commonly used in the production of various bulk solids, including minerals, agricultural products, and biomass. Here are the key features and components of a triple pass rotary drum dryer: 1. Triple Pass Design: - The material being dried passes through three rotating drums or cylinders, hence the term "triple pass." Each drum serves a specific purpose in the drying process. 2. Material Flow: - The material enters the dryer and first passes through the innermost drum. After the initial drying phase, it moves to the middle drum and then to the outer drum, undergoing additional drying in each pass. 3. Heat Source: - Heat is typically provided by a combustion system, such as a burner or furnace, located at one end of the drum dryer. The hot gases generated by the combustion process flow through the rotating drums, transferring heat to the material. 4. Air Flow: - The dryer is designed to optimize air flow through the drums, ensuring efficient drying. In a triple pass design, the material and hot gases move counter-currently through the three drums, enhancing heat transfer and drying efficiency. 5. Lifting Flights or Lifters: - Lifters are internal components inside the drums designed to lift and cascade the material as it rotates. This movement promotes good heat transfer and uniform drying. 6. Retention Time: - The triple pass configuration allows for an extended retention time of the material in the drying system. This longer exposure to heat enhances the drying efficiency, making the triple pass rotary drum dryer suitable for materials with high moisture content. 7. Cooling Section: - After the material completes the three passes and reaches the end of the drum dryer, a cooling section may be included to reduce the temperature of the dried material before it is discharged. 8. Applications: - Triple pass rotary drum dryers are used in various industries, including agriculture (drying crops like grains), minerals (drying ores or concentrates), and biomass (drying wood chips or other organic materials). 9. Efficiency and Energy Consumption: - Triple pass rotary drum dryers are known for their high efficiency due to the extended drying time and effective heat transfer. However, they may have higher energy consumption compared to single or double pass dryers. When selecting a triple pass rotary drum dryer, it's essential to consider factors such as the type of material to be dried, required moisture reduction, and overall processing requirements. Proper design and operation are crucial to achieving optimal drying performance. Technical details Klsdpfx Aaeq Nfuzsrjt We have different options for different requirements, please contact our team for more info.

Condition: new, Year of construction: 2026, power: 11 kW (14.96 HP), Rotary drum dryer for drying various kinds of materials like sand, biomass, sawdust, red mud, bentonite, coal Diameter: 1200mm Length: 10000mm Power: 11-13KW Gradient: 3% Capacity: 1.5-3 t/h Weight: 14Tons Besides this model, we also have the other models of rotary drum dryer 1500x12000mm, 2400x20000mm, and complete drying system for various materials, welcome to contact us for more details Our factory can design suitable solution according to your specific requirements. Rotary drum dryers are highly efficient machines used extensively in the processing of wood chips, sawdust, and biomass. They operate by utilizing a rotating drum that heats and dries the materials as they are transported through the cylinder. The design of these dryers allows them to handle a wide range of particle sizes and moisture levels, making them suitable for various types of biomass. They can also tolerate high-temperature exhaust gases, which contributes to their efficiency and versatility in industrial applications. Rotary Drum Dryer for Wood Chip, Sawdust, Biomass 🌳 Introduction to Rotary Drum Dryers In the realm of biomass processing, moisture control is key. Enter the Rotary Drum Dryer, an indispensable machine designed to efficiently reduce the moisture content of wood chips, sawdust, and biomass. This essential tool enhances productivity, improves fuel quality, and is pivotal in biomass energy production. Let’s explore its functionality and benefits! 💡 💼 Key Benefits of Using a Rotary Drum Dryer 1. Energy Efficiency: Designed to optimize energy use, Rotary Drum Dryers consume less power while delivering high drying efficiency. 🌿💡 2. High Capacity: Capable of handling large volumes of biomass, these dryers are perfect for industrial applications where large-scale drying is needed. 🏭 3. Improved Product Quality: By achieving the optimal moisture content, the dryer enhances the quality of biomass for fuel, pellets, and other applications. 🔥 4. Versatility: Suitable for a wide range of materials including wood chips, sawdust, and various types of biomass, making it a versatile tool in any biomass processing plant. 🌳 # Application Fields and Materials of Rotary Drum Dryer Kledpsq Igyvjfx Aarst II. Application Fields A. Agriculture - Drying of grains, seeds, and forage. - Processing of agricultural by-products like straw and husks. B. Food Industry - Dehydration of food products such as fruits, vegetables, and spices. - Preservation of food quality during drying. C. Chemical Industry - Drying of chemical powders, granules, and crystals. - Application in the production of fertilizers and detergents. D. Mining and Minerals - Drying of ores, coal, and mineral concentrates. - Reduction of moisture content for easier handling and processing. E. Construction Materials - Drying of sand, cement, and other construction aggregates. - Preparation of materials for manufacturing processes. F. Pharmaceuticals - Drying of pharmaceutical powders and active ingredients. III. Materials Processed by Rotary Drum Dryer A. Organic Materials - Biomass, wood chips, sawdust, and animal feed. B. Inorganic Materials - Sand, clay, limestone, and gypsum. C. Waste Products - Sludge from wastewater treatment plants. - Industrial by-products for recycling or reuse.

Condition: excellent (used), Year of construction: 2006, machine/vehicle number: 06.2431.771, functionality: fully functional, We are delighted to present this Revent 724 O/G IOC Rotary Oven, built in 2012 and maintained in very good condition. The oven comes complete with five working racks, all in good condition and ready for immediate use. For further details, specifications, or to arrange a viewing, please feel free to contact us by phone or message — we will be happy to assist you Kljdpfxsyi D Amj Aaret

Condition: used, operating hours: 32,574 h, Ingersoll Rand SSR MH-55 Rotary Screw Air Compressor – Used Industrial Compressor Description: Ingersoll Rand SSR MH-55 industrial rotary screw air compressor, suitable for workshop, manufacturing, fabrication or general factory compressed-air supply. Ksdey Ry E Uepfx Aarolt This is a heavy-duty industrial compressor with integrated control panel, air pressure and temperature gauges, hour meter, electrical cabinet and internal compressor/motor assembly. The machine is currently in used condition and has been removed from regular service / stored on site. The hour meter show approximately 32,574 hours. Key features: Manufacturer: Ingersoll Rand Model: SSR MH-55 Type: Rotary screw air compressor Integrated control panel Air pressure gauge Temperature gauge Hour meter fitted Internal compressor and drive motor present Industrial cabinet-mounted unit Suitable for production or workshop air supply Good candidate for recommissioning, refurbishment, spares or export Condition: It is offered sold as seen. Buyer should inspect the compressor and satisfy themselves as to running condition, electrical requirements, service history, capacity, pressure rating and suitability before purchase. Important note: Professional inspection, lifting, loading, transport and recommissioning will be the buyer’s responsibility unless otherwise agreed. Electrical and pressure-system checks should be carried out before use. Ideal for: Engineering workshops Manufacturing sites Fabrication shops Spray shops Industrial air systems Compressor refurbishment specialists Spares or parts use Viewing recommended. Loading / removal: Buyer to arrange, unless agreed separately

Condition: used, - Brand / Model: Bongard 8.60 - Energy: Gas - Type: Rotating convection oven - Trolley included: Yes - Tray dimensions: 600 × 800 mm - Number of levels: up to 18 levels (depending on trolley configuration) - Approx. external dimensions: L 220 cm × D 210 cm × H 260 cm - Steam extraction: integrated, with adjustable flaps Kjdpfow Dt Dwsx Aarjlt - Control panel: mechanical, easy to use - Estimated weight: 1,500 kg

Condition: used, Year of construction: 2016, Manufacturer : Thimonnier Model : THD 400 Year: 2016 Application: Filling pre-formed pouches or doypacks 4-station rotary turret · Solids & liquids · Atmospheric or vacuum Cycle machine – 4 stations Station 1 – Loading of sachets using a suction arm Station 2 – Opening of sachets (internal forceps + air blast) Station 3 – Filling (solid and liquid dosing) Station 4 – Sealing / closing (atmospheric or vacuum) Product discharge via flat belt conveyor Pouch sizes Max: 300 × 350 × 80 mm Min: 200 × 250 × 50 mm Other sizes available (requires replacement parts) Speed and dosage 100 kg/h (solid product) 4 to 10 bags/min depending on size Solid dosing: bowl/hopper + weighing unit 0.3–2.5 kg Liquid dosing: flow meter Submersible filling available Klodpfoy Tp D Eox Aarst Supply Electrical: 400 V 3-phase + N + T, 50 Hz, 8 kVA Pneumatic: 6–9 bar, 35 m³/h Water: 1–3 kg/cm², 250 L/h, free return General specifications Dimensions: 311 × 302 × 260 cm Weight: approx. 1,000 kg Material in contact with the product: 316 stainless steel Vacuum pump or venturi (vacuum option) Documentation available Video of workshop tests (on request) Full technical dossier (digital version) Spare parts

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: nvt, overall weight: 25 kg, Brand new filling machine / filling machine / Dosing machine which can be used for filling liquids, pastes, creams, oils, etc. Suitable for almost all liquids but also thicker substances. At this point you could think of: Shampoos Creams Honey Jam Milk Yogurt Water Alcohol Pesto Disinfection Etc. Very solid machine made from high-quality stainless steel that runs on air and 220v, Plug and Play! Extremely suitable for filling small batches. A very small compressor is enough to get this machine working. This can be supplied if necessary. For this we recommend at least a 12L version. Kedperivv Ejfx Aarjlt The filling machine has a 500ml cylinder so that it can fill a maximum of 500ml per stroke. By allowing the machine to deliver multiple strokes, a multiple of these is also fine. This also applies to 750ml by giving 2 x 375ml. The smallest stroke is 50ml, everything between 50 and 500ml can be lost in 1 stroke. We also have a model that has a cylinder of 100ml and can therefore fill between 5ml and 100ml per stroke. We would like to inform you further about this. It has a large 25L funnel, and it is also possible to connect the IBC or a 200L barrel to work even faster with large filling quantities. The machine is equipped with a foot pedal and auto mode. In the auto mode, the machine continues to fill continuously and larger quantities can be filled easily and quickly. The speed between fillings can be adjusted. The foot pedal allows you to fill at your own pace. Depending on the operator and number of ML, between 15-25 units per minute can be filled. Which makes this a very fast machine. The machine weighs approximately 15/20kg and can easily be placed on a table. Made entirely from stainless steel, a very high-quality machine. If you have any questions, please email us and we will be happy to help you with this or another machine. We also have a label machine which forms a very good combination with the filling machine. We aim to respond to you within 24 hours. Of course we can also be reached by telephone. We are happy to assist you on working days between 9:00 AM and 5:00 PM