Used Linear Cylinder Machine for sale (69,772)

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 2,550 mm, sheet thickness (max.): 10 mm, STANDARD EQUIPMENT - Steel construction main frame - Hydraulic top roll opening head - Movable control panel - Motor-driven central rolls - Hydraulic up-down movement for rear and lower rolls - Precision bending with braked main motor - Cone bending and pre-bending system - Lower and upper rolls driven by planetary gearbox - Rear roll ball system facilitating sheet movement - Compliance with EU safety directives - High-strength forged steel rolls manufactured from SAE 1050 (CK45) certified steel - Hardened shafts - Digital indicators (2 units) - User manual OPTIONAL EQUIPMENT - Overhead crane (elevator) for supporting large diameter bending - Hydraulic side supports for large diameter bending - Ground and polished rolls - Wire grooves at roll ends - NC control unit - Dual speed operation - Infinitely variable speed adjustment - Ejector system Fjdpfx Adjw Slcgo Nspg - Hydro-motor option TECHNICAL SPECIFICATIONS Bending length: 2550 mm Pre-bending: 6/8 mm Bending: 8/10 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 l Length: 4500 mm Width: 1200 mm Height: 1370 mm Weight: 4800 kg

Condition: new, Year of construction: 2025, control type: NC control, actuation type: hydraulic, number of rollers: 3, roller (bottom) diameter: 250 mm, roller (top) diameter: 250 mm, side roll diameter: 200 mm, roller length: 3,100 mm, sheet thickness (max.): 9 mm, overall weight: 5,400 kg, STANDARD EQUIPMENT Steel construction main frames Hydraulic upper roll opening head Movable control panel Motor-driven central rolls Hydraulic up/down movement for rear and bottom rolls Precision bending with braked main motor Cone bending and pre-bending system Fpsdpsw Slbvofx Ad Neg Upper and bottom rolls driven by planetary gearbox Rear roll ball support system for easier sheet movement Compliance with EU safety directives High-strength, forged steel rolls manufactured from SAE 1050 (CK45) certified steel Hardened shafts Digital readouts (2 units) Operator's manual OPTIONAL EQUIPMENT Overhead crane (elevator) for support in large diameter bending Hydraulic side supports for support in large diameter bending Ground and polished rolls Wire grooves on roll ends NC control unit Dual-speed operation Infinitely variable speed adjustment Ejector system Hydraulic motor option TECHNICAL DATA Bending Length: 3050 mm Pre-bending: 5/7 mm Bending: 7/9 mm Top & Bottom Roll Diameter: 250 mm Side Roll Diameter: 200 mm Min. Bending Diameter: 375 / 1250 mm Motor Power: 7.5 + 1.5 kW Bending Speed: 5 m/min Tank Capacity: 25 L Length: 5000 mm Width: 1200 mm Height: 1370 mm Weight: 5400 kg

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Ball and cylinder forming machine Fedpfev Ihd Uex Ad Nopg Brand Vemag Model BallControl XXL Year of production 2021 ⁃ For forming meat balls and cylinders ⁃ Capacity up to 200 strokes per minute depending on portion size for unfilled products ⁃ For connection to the main VEMAG HP-E series filling machine Flow distributor ⁃ Base unit, flow distributor pipes, connecting pipes in a stainless steel housing, ⁃ The distributor is mounted on a movable slider, which facilitates assembly and disassembly, ⁃ Servo drive of the cut-off plates - with full control via the VEMAG filling computer, ⁃ Metal safety guards, ⁃ Mobile design, ⁃ Frame made of stainless steel, ⁃ Dosing directly onto a 1 x 1 m tray, ⁃ Dosing onto a 1 x 1 m tray ⁃ Belt width 1000 mm, ⁃ With metal tray dispenser 1m x 1m ⁃ Trolley for dismantled parts for washing and hooks for hanging molding sets x 2pcs.

Year of construction: 2016, condition: excellent (used), Polish machine built to a high standard, full touchscreen controls. 4 lane linear pot filling and sealing line. Has been filling foil pots of pate. Perfect for pate, animal foods, meat paste etc. In nearly new condition. Fjdpfx Aeht Hlled Nepg

Condition: as good as new (ex-display), 20 pcs Cylinder arm machine for leather Fpodpfoikqpkjx Ad Njg -1 needle -Thread trimmer -3 transport -220v -Efka motor

Condition: excellent (used), Year of construction: 2004, I sell the 1-cylinder roller coater BURKLE SLC1300. Year 2004 Fpsdpfx Adjwun Hbs Nog Working width 1300mm Very good condition. Fully working. Available immediately.

Condition: new, Year of construction: 2022, I sell the new widebelt sanding machine Casadei Libra 45 RCT 110 Year 2022. Configuration: Steel moulding cylinder with spiral knives Combi unit hard rubber cylinder + segmented pneumatic jumping pad. Working width 1100mm Elektronic working height adjustment with digital readout 3-160mm 1 Motor 2 Feeding speeds. Programming of in/out jump of the pad. Sensitive adjustment of pad position. Sensitive adjustment of cylinders position. Pneumatic adjustment of pad and cylinders pressure position. Pressure rollers for short elements. Air-blow for cleaning the sanding band. Condition NEW ! The machine was not working before. Available immediately. Including full documentation and CE. Fpsdpfxjrddh Ij Ad Nsg

Year of construction: 2025, condition: new, Gas Cylinder Shot Blasting Machine is a specialized industrial surface-treatment system used to clean, descale, and prepare gas cylinders (like LPG, industrial gas bottles) before repainting, refurbishing, or further processing. ✅ What It Does It propels steel shots at high velocity onto the cylinder’s surface inside an enclosed chamber. This process: Removes rust, old paint, and surface contaminants Provides a uniform roughened profile for better paint adhesion (surface preparation) Improves structural inspection accuracy (detecting dents, cracks, corrosion) Restores cylinders to safe working condition for reuse Fjdpfjxun T Ssx Ad Nspg Typical configuration includes: Component Function Blast Chamber Containment of blasting process Blast Wheels / Turbines Propel abrasive media at high speed Work Handling System Conveyor, roller, or rotation devices for cylinders Abrasive Recovery System Collects used shots for recycling Dust Collector Removes blasting dust for environmental compliance Control Panel Automation & process monitoring

Condition: good (used), Year of construction: 2004, Sakurai Front Pick up Automatic Suction Feeder Fpjdpfx Asww Eilod Nog Sakurai Aktiprint SK UV Dryer Sakurai Automatic Stacker Fully Cleaned

Condition: good (used), Jones and Shipman Suprema 650 M Easy Universal OD/ID Cylindrical Grinder s/n SO19131, w/ J&S PLC Control, 12" Swing x 25" Centers, Swivel Wheelhead w/ OD & ID Capability, Internal Spindle, Hydromation Coolant System, Heidenhain DRO, Workholding NOT Included Fsdpfx Ajywfyqsd Nopg

Condition: used, Year of construction: 2001, 2001 Kellenberger CNC Grinder KEL-VARIA RS175/1000 Fpedpfjywftdsx Ad Neg

Condition: good (used), Year of construction: 2013, TOYODA (JTEKT) GL32M-63 CNC UNIVERSAL CYLINDRICAL GRINDER Fpsdpfx Adsrtrzpj Neg Equipped with: CBN Grinding Wheel Flagging Steady Rest Workhead Mounted Rotary Dresser Marposs P3SE System Monitoring Toyoda In Process Gaging Marposs E20N Acoustic Controller Air Gap Eliminator Workpiece Collision Control Coolant Pumps W/Magnetic Separator Pendant Control RH Workhead with Center LH Workhead with Center Work Rests Worklight Light Curtains Stacklight Extra Wheels Specifications: -Grind Center to Floor: 1,000 mm -Swing Over Table: 320 mm -Distance Between Centers: 630 mm -Grinding Diameter Range: 10 - 150 mm -Floor Space (Base machine w/auxiliary equipment): 3,400 x 5,000 mm -Net Machine Mass (approx.): 10,500 kg Grinding Wheel: -Type: CBN Wheel -Wheel Size (OD): 350 mm -Maximum Wheel Width: 60 mm -Surface Speed: 120 m/s Wheelhead: -Spindle Bearing: TOYODA STAT Bearing -Slide: V and Flat -Feed System: Ballscrew -Rapid Feed (on diameter): 30 m/min -Minimum Incsrement (on diameter): 0.0001 mm Workhead: -Type: Dead Spindle -Work Speed (Max): 500 rpm -Center Taper: MT #4 Footstock: -Type: Hydraulic -Taper Compensation: Manual -Maximum Center Retraction: 60 mm -Center Taper: MT #4 Motors: -Wheel Drive Motor: 15 kW, Belt-Drive -Wheelhead Feed Servomotor: 1.3 kW Tank Capacities: -Wheel Spindle Lubrication Oil: 80 L -Hydraulic/Lubrication Oil: 20 L

Condition: excellent (used), Jones & Shipman 1076 Universal Cylindrical Grinder Capacity 10" x 27" Hydraulic Feeds Swivel Wheelhead Variable Speed Swivel Workhead Fpodoy Nzxyopfx Ad Nsg Serial Number BO 94944 Plunge & Intermittent Feeds Internal Grinding Spindle Low Volt Light Coolant Note: External Guards and Extraction not included

Condition: used, MYFORD MG 12 HM UNIVERSAL CYLINDRICAL GRINDING MACHINE MAKE MYFORD, MADE IN ENGLAND MODEL MG 12 HM YEAR MID 90s SWING 127.0 mm LENGTH 305.0 mm PLUS Fjdpfxoy Nmg Ao Ad Nopg HYDRAULIC MOVEMENT DROP DOWN INTERNAL INFINITELY VARIABLE SPEED CONTROL ON THE WORK HEAD SPARE SWIVELLING WORK HEAD RANGE OF TOOLING

Condition: ready for operation (used), Year of construction: 1994, Studer S30-1 Fpedpoy Rmxujfx Ad Neg Year of manufacture: 1994

Condition: good (used), Scharringhausen round bending machine Type: UDR-X1-3 Capacity: 3000 x 30 mm Tube length: 3100 mm Upper tube diameter: 470 mm Lower tube diameter: 410 mm Engine power: 70 HP Dimensions: 830x245x295 cm LxWxH Fodpjimmb Iofx Ad Nspg Weight: ca 55000 KG Included documentation Movie available!

Condition: good (used), Tos Hostivar cylindrical grinding machine Type: 1U X-path: 900 mm bed: 900 x 140 mm Turning diameter bed: 260 mm Fpedpfsq H Ap Nox Ad Njg Chuck diameter: 120 mm Diameter grinding stone max: 320 mm Dimensions: 150x105x140 cm LxWxH

Condition: used, Technical details: grinding diameter: 250 mm grinding length: 1000 mm max. workpiece weight: 300 kg grinding wheel width: 150 mm Grinding wheel/diameter x bore x width: 600 x 305 x 80 mm folded disc width: 200 mm spindle taper: MK 5 tailstock taper MT: 5 sanding headstock rotation: 45° speeds:: 1050/1240 U/min longitudinal feed of the table: mind. 1 mm table speeds: 0,05-5 m/min traverse movement of the grinding headstock : 415 mm traverse movement of the grinding headstock with aut. infeed: 2 mm For grinding : 0,15 mm aut. infeed at table dead center: 0,005-0,05 mm for grinding : 0,0005-0,01 Self-infeed at grooving : 0,01-5 mm/min Quick adjustment of the grinding headstock : 60 mm grinding wheel motor: 19 kW total power requirement: 22 kW weight of the machine ca.: 5 t Fpjdjyzptispfx Ad Nsg

Condition: used, Year of construction: 2003, Technical details: grinding length: 1500 mm centre height: 325 mm weight of the machine ca.: 12 t Karstens EMAG H310 Universal Grinding Machine Year of manufacture: 2004 Center distance: 1500 mm Center height: 325 mm Reinforced workpiece spindle, load capacity up to 250 kg Driven C-axis for polygon, thread, and eccentric grinding. 3 individually mounted grinding spindles. Siemens 840D control system Fpjdpfex Hgiljx Ad Nsg *

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Kellenberger URS175/800 (2 units) Year of manufacture: 2013 and 2014. Capacity: Centre height 175 mm; Centre distance 1000 mm; Grinding length 800 mm Accessories: Coolant system, internal coolant supply (IKZ), paper filter, MARPOSS probe, MOVOMATIC measurement control, internal grinding attachment, balancing unit, RS‑232 interface. Based on the documentation (2012 offer), I have summarised the technical data for the KEL-VISTA URS 2-3 175 / 800 GE FANUC 21i: Key Data · Centre height: 175 mm · Centre distance: 800 mm (note: 1000 mm in price list) · Grinding length: 400 mm (note: 800 mm in another table) Connection Data Fpodpfsy Nz E Hox Ad Neg · Supply voltage: 3x400 VAC / 50 Hz or 3x460 VAC / 60 Hz · Power consumption: max. 25 A · Compressed air requirement: min. 6 bar / approx. 2.5 m³/h · Coolant system: 80 l/min at max. 3 bar / 160 l/min at max. 1 bar Ambient Conditions · Room temperature: max. 40 °C · Air humidity: max. 75 % Weights & Floor Load · Weight (centre distance 800 mm): approx. 3,500 kg · Floor load: 8,000 N/m² Axes · X-axis (grinding slide): AC drive Fanuc, direct ball screw, resolution 0.1 µm · Z-axis (table): AC drive Fanuc, resolution 0.1 µm · Swivel range (table): 6° for 175/800 Grinding Head (Type URS) · Wheel dimensions: 450 x 63 x 203.2 mm (right) · Tool holder taper: 1:10, Ø 63 mm · Drive power: 6.0 kW · Speed range: 875 – 1,900 rpm · Peripheral speed: max. 40 m/s (T2: v constant) · Swivel system: Hirth toothing (1° indexing), swivel range -210° / +10° · Internal grinding device: belt-driven, own water-cooled motor (stepless) Workpiece Spindle (Standard) · Mount: MK 5 / external taper DIN 55026 size 5 · Roundness (plunge grinding): Delta R < 0.4 µm · Capacity in overhung position: 100 Nm, max. 80 kg · Capacity between centres: max. 100 kg · Speed range: 1 – 800 rpm (AC drive, programmable) · Positioning accuracy: < +/-0.5° · Swivel range: -10° / +100° Tailstock (Note) · Quill riveted, in preloaded ball guides · Hydraulic or pneumatic tailstock pressure selectable Control · Type: GE FANUC 21i (3-axis CNC, conversational support)

Condition: used, JONES SHIPMAN 1305 EIU CYLINDRICAL GRINDING MACHINE MAKE JONES AND SHIPMAN, MADE IN ENGLAND MODEL 1305 EIU CENTRE HEIGHT 185.0 mm Fedpfxsy Hi Eps Ad Nspg MAX DIAMETER 370.0 mm MAX GRINDING LENGTH 1016.0 mm MAX GRINDING WHEEL 350.0 mm x 40.0 mm GRINDING SPEED 40 – 320 RPM TABLE ROTATION 16 DEGREE TO – 12 DEGREE MAX INTENAL SPINDLE SPEED 24,000 RPM PLUS HEIDENHAIN DRO INTERNAL SPINDLE ATTACHMENT EXTENSIVE RAGE OF TOOLING AND ACCESSORIES RANGE OF MAGNETIC CHUCKS PENDANT CONTROL HYDRAULIC PACK CLEAN

Condition: good (used), Year of construction: 2008, functionality: fully functional, center height: 180 mm, grinding length: 1,000 mm, grinding wheel diameter: 508 mm, grinding diameter: 350 mm, !!!ATTENTION: ON-SITE SALE IN 74219 MÖCKMÜHL!!! External cylindrical grinding machine TACCELLA ELEKTRA Evo 1018 MPC Year of manufacture: 2008 Control: Fanuc 21i Grinding diameter: max. 350mm Grinding length: max. 1,000mm Equipment: - 2 grinding spindles for straight and angular plunge grinding on one shaft - Grinding spindle head manually swivellable - Prepared for internal grinding - Tailstock - Automatic balancing system - Probing system for length and diameter of workpiece - Structure-borne noise sensor - Coolant system (KSS) - Oil mist extraction unit Fpjdoy N S Hnjpfx Ad Neg Many grinding wheels and accessories included

Condition: used, Year of construction: 1992, Technical details: Fodpfx Aoy Nk Hyod Nspg grinding diameter: 50 mm grinding length: 100 mm centre height: 100 mm centre distance: 200 mm

Condition: used, Year of construction: 1989, Technical details: grinding diameter: 300 mm Fedpfx Ajy Nk Hmsd Nspg grinding length: 540 mm centre height: 175 mm total power requirement: 20 kVA centre distance: 1000 mm

Condition: used, Year of construction: 2014, grinding diameter 100 mm grinding length 400 mm centre height 100 mm z-axis 425 mm table speed -stepless- 0,05 - 5,00 m/min workpiece spindle head rotation speed 90 - 1.000 U / min. grinding head swivelling -2 - +30 Grad tailstock quill taper MT 3 grinding wheel speeds 1.800 / 2.000 U/min grinding motor 3,70 kW dimensions of grinding wheel 350 x 50 x 127 mm total power requirement 7,00 kW weight of the machine ca. 2,50 t Fpsdpfx Asy Rah Asd Njg dimensions of the machine ca. 3,00 x 2,50 x H2,20 m With 2-axis digital display FAGOR, coolant device