Used Linotype Modell I.d for sale (18,903)

Condition: used, Year of construction: 2008, Distance between centres 1500 mm Center height 250 mm Swing over bed 500 mm Swing over cross slide 300 mm Swing in gap 710 mm Length of gap 240 mm Spindle bore 82 mm Spindle speeds 11-1600 rpm Automatic feeding Lasdpfez Szm Ssx Ahajh Rapid feeding Equipped with: 3 quick change tool holders 2 axis dro

Condition: new, TU model cable winch, useful force 800 daN, cable diameter 8.0 mm, with 20 m cable for personnel transport · Heavy-duty design · Universally applicable · For pulling and tensioning · Consisting of a device with a lever tube and a 20 m cable · Cable with a pointed end and a spliced hook, on a hand reel = small basic equipment · The device can be used in any position, for pulling, lifting and tensioning · Smooth, millimeter-precise operation · Compact, easy-to-handle design · Long service life · Other technical features: Force required: 30 kg · Equipment: for personnel transport · Lever tube length, retracted/extended: 510/770 mm · Cable feed: 65 mm · Design: with cable · Subject to mandatory testing: yes Design: with cable Equipment: for personnel transport Total weight: 15.8 kg Cable diameter: 8 mm Force required: 30 kg Cable winch width: 108 mm Useful force: 800 daN Lasdpj Ab Nhnsfx Ahash Cable feed: 65 mm Cable winch length: 527 mm Cable length: 20 m Lever tube length, retracted/extended: 510/770 mm Cable winch height: 265 mm

Condition: new, Wire rope winch, model T, working load 1600 daN, rope diameter 11.5 mm, with 20 m of rope. · Lightweight design Lasdpe Ab Nilsfx Ahajh · Universally applicable · Lightweight and easy to handle · For pulling and tensioning · Housing made of high-strength sheet steel, impact-resistant · With overload protection · With lever tube · With 20 m rope · With tip and crimped hook on hand reel = small basic equipment · Other technical features: Effort required: 40 kg · Lever tube length retracted/extended: 650/1150 mm · Rope feed: 42 mm · Design: with rope · Requires testing: yes Effort required: 40 kg Rope length: 20 m Total weight: 28.9 kg Lever tube length retracted/extended: 650/1150 mm Winch width: 127 mm Working load: 1600 daN Winch length: 650 mm Design: with rope Rope feed: 42 mm Winch height: 315 mm Rope diameter: 11.5 mm

Condition: reconditioned (used), Universal Tool Milling Machine Make: harich (DECKEL) Model: B (FP 2) Aktiv Refurbished with CE certification Geometric inspection with test protocol Lasdpfx Asx A T Evshajh with warranty Accessories: - 3-axis digital readout Heidenhain Positip 8016 - Fixed table or universal table - Vertical milling head SK 40 - Centralized manual lubrication - Coolant system - Operating manual CE and safety equipment: - New machine electrics with control cabinet - Electronically monitored cover on the vertical milling head - Chuck guard with electrical interlock - Drive motor with brake function - Control panel with emergency stop, enable, start and stop buttons, potentiometer for feed rate adjustment - New documentation for machine and control cabinet - CE declaration of conformity

Condition: good (used), Year of construction: 2021, This machine is equipped with adjustable forks, allowing it to place a double row of leeks into the crates. It can easily position two rows of leeks in 160 cm potato boxes. Of course, the machine is also suitable for standard leek racks. Depending on the requirement, it can place either one or two rows in the box, as shown in the video. The machine is currently set up for 160x120x120 cm boxes, but it can be easily adapted to other sizes. The machine was built in 2021 and has been in use since 2022. It is an automatic box filler with hydraulic torpedoes equipped with leaf-cutting blades, a shaker in the digging knife, and another shaker under the clamping belts. It also features peeling brushes and its own hydraulic system with a PTO pump. Technically, the machine is in good condition. The bearings in the shaker and digging knife have recently been replaced. The clamping belts are still in good shape, although the last filling belts are slightly dried out.Year of manufacture 2021 (in use since 2022) Automatic box filler Hydraulic torpedoes with knives for the leaves Shaker in the digging knife Shaker under the clamping belts Cleaning brushes Own hydraulic system with PTO pump More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. Ljdpfxjz Rdale Ahajah See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Hello, we are offering our 2017 Rabolini die-cutting machine/die-cutting system, which has been completely overhauled. The maximum die-cutting format is 100 cm x 140 cm, with a cutting force of 360 tons. Laodpszxufvsfx Ahaeh Die-cutting principle: flat/flat. Weight of the machine: 8,100 kg. The die-cutting machine is located on the ground floor, on a well-accessible industrial concrete floor. Documentation, CE declaration, etc., are all available! The machine can be inspected and tested while in operation. We would be happy to assist with training and instruction on how to operate the machine. The machine is located in D-41751 Viersen and is available for inspection. If you have any questions about the machine, please do not hesitate to contact us.

Condition: good (used), Franz Haas Wafer Stick Baking Oven, Model EWB 1/1, completely refurbished. The machine is constructed from ASIS 304 stainless steel (with the main frame made of carbon steel). The oven is equipped with a rotating ring, which has adjustable speed control to achieve the desired baking characteristics for the wafer sticks. The ring has been cleaned and checked (re-aligned), and the supports/bearings are brand new. Fans have been replaced with new units. The exhaust outlet and flange have been replaced for quick installation. The machine comes with two extruders with bushings for ribbon forming and tube diameter shaping. Equipped with a cutting knife featuring a pneumatic actuator and photoelectric sensor for precise cutting (tube length adjustment is possible). The oven includes a stainless steel batter tank mounted on a frame with a trolley. Fitted with pumps that feed batter from the tank onto the ring surface. Comes with a new control panel and a new gas pressure regulator. Speeds of the ring and pumps are adjustable via frequency inverters. Dimensions: length 3200 mm, width 1400 mm, height 1700 mm. The machine is powered by natural gas, high-methane type, symbol E (previously GZ 50). Ljdpfxsywgaxo Ahajah Electrical requirements: 3x400V / 16A, consumption approx. 2.5/3 kWh. The machine has undergone a complete overhaul. All thermal elements have been replaced with new, environmentally-friendly components—resulting in lower gas consumption and enhanced efficiency. Output: approx. 120-150 kg per 8 hours.

Year of construction: 2012, condition: reconditioned (used), functionality: fully functional, CALENDER SUITABLE FOR CONTINUOUS FABRICS: • Transfer printing. • Reactivation of direct inks. • Heat setting. • HEATED CYLINDER DIAMETER: 200 mm Lodsz Dh Tbjpfx Ahaoah • HEATED CYLINDER WIDTH: 2000 mm • Working width: 1,850 mm • Total width: 3300 mm • Total length: 2300 mm • Total height: 2100 mm

Year of construction: 2015, condition: good (used), functionality: fully functional, machine/vehicle number: P-000003, Zum Verkauf steht ein professionelles industrielles Hochdrucksystem ECOROLL HGL3.01, Baujahr 2015, hergestellt von ECOROLL AG Werkzeugtechnik, Celle, Deutschland. Die Anlage verfügt über ein integriertes Hochdruck-Speichersystem, eine Siemens SIMATIC Steuerung, Drucküberwachung, Hochdruckarmaturen sowie ein Bedienpanel. Die Anlage wurde vor dem Verkauf angeschlossen und auf Funktion geprüft. Sie lässt sich ordnungsgemäß starten, die Steuerung funktioniert und das System baut Druck auf. Verkauft wird die komplette, auf den aktuellen Fotos dargestellte Anlage. TECHNISCHE DATEN Hersteller: ECOROLL AG Werkzeugtechnik, Celle, Deutschland Typ: HGL3.01 Baujahr: 2015 Seriennummer: P-000003 Max. zulässiger Druck (PS): 300 / 245 bar Leistung: 5,5 kW Spannung: 400 / 690 V Frequenz: 50 Hz Eigengewicht: 786 kg Zulässiger Temperaturbereich: +5 bis +45 °C Kennzeichnung: CE 0045 HOCHDRUCK-SPEICHERSYSTEM Die Anlage ist mit Hochdruckbehältern der Firma Hochdrucktechnik Leimpek ausgestattet. Technische Daten laut Typenschild: Betriebsdruck PS: 300 bar Prüfdruck PT: 450 bar Volumen: 150 Liter CE-Kennzeichnung: 1637 STEUERUNG UND AUSSTATTUNG * Siemens SIMATIC Bedienpanel * drei Manometer zur Drucküberwachung: Speicherdruck, Systemdruck und Primärdruck * Not-Aus * Hauptschalter * Kompressorsteuerung * Steuerung der Hochdruckventile * Hochdruckarmaturen * Rohrleitungen und Verbindungsschläuche * integriertes Druckspeichersystem TECHNISCHER ZUSTAND Laodjzv Rmdspfx Ahajh Die Anlage ist funktionsfähig und wurde vor dem Verkauf getestet. Das System wurde angeschlossen und in Betrieb genommen. Bedienpanel und Steuerung funktionieren ordnungsgemäß. Die Anlage lässt sich problemlos starten und baut Druck auf. Der optische Zustand entspricht den aktuellen Fotos. Normale, dem Alter und industriellen Einsatz entsprechende Gebrauchsspuren. Eine Besichtigung der Anlage ist nach vorheriger Terminvereinbarung möglich. PREIS: 12.900 € netto – Verhandlungsbasis Gewicht: 786 kg. Abholung und Organisation des Transports können mit dem Käufer abgestimmt werden. Bei Interesse können weitere Detailaufnahmen der Anlage und der Typenschilder zur Verfügung gestellt werden. Anlage sofort verfügbar.

Condition: excellent (used), functionality: fully functional, sheet thickness (max.): 4 mm, SOMO SHEARING MACHINE 4050 X 4 MODEL: SC 40/4 MOTORIZED GAUGE GULLET: 500 HYDRAULIC PRE-CLAMPING DEVICES INSPECTED USED MACHINE, IN WORKING CONDITION INTERNAL CODE: SVR 439 Lsdpozz Siwjfx Ahaeah

Condition: good (used), Year of construction: 2005, Year of manufacture 20051 pot dispenserSuitable for pot sizes 9 to 19 cm24 pot positionsIdeal machine for planting with several peopleIncluding pneumatic ejectionIn very neat conditionWater unit with sensor (only gives water when a pot passes) More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. Lajdpsz Rdt Esfx Ahaeh Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: used, Atlas Type: CI3000 F Atlas CI3000 Xenon Fade-Ometer The Ci3000+ Weather-Ometer and the Fade-Ometer, with their advanced digital control systems, represent significant advancements in the application of digital and optical technologies in easy-to-use laboratory weathering equipment. The 3000 series has been approved by many OEMs in the textile, paint, and coatings industries, as well as in the plastics industry, as an exclusive platform for precise, reproducible, and repeatable results for predicting service life. Features: Climate type Test type: Sunlight simulation Light source: Xenon arc lamp Applications: Additives and dyes Adhesives and sealants Architecture and construction Automotive industry Food and beverages Graphics Packaging Paints and coatings Photovoltaics Plastics Textiles Wind and solar Consumer electronics Compressed air supply The CI3000's humidification system uses a compressed air ultrasonic spray nozzle. Before entering the system, the compressed air must pass through a water/oil separator. The small air regulator in the CI3000 contains a second water-oil filter and a 5-micron solid particle filter. Ensure that a separate oil-water separator is installed and do not rely on the air regulator filter, as it is designed only as an additional device. Compressed air specifications Pressure: 80-100 PSI (552-689 kPa) Flow rate: 4 CFM (0.11 m³/min) Dimensions: Overall dimensions of the CI3000 Lsdpfozg Tmhox Ahasah 37.5" Width x 29" Depth x 72" Height (95 cm Width x 73 cm Depth x 183 cm Height) Required footprint: 41.5" Width x 80" Depth (105 cm Width x 203 cm Depth) Total weight: 404 kg Voltage: 380-220 V 38 A 50 Hz ~3/N/PE 8 kW 404 kg Condition: used Scope of supply: (See image) (Subject to changes and errors in technical data and information!) We would be happy to answer any further questions you may have by telephone.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 5,000 h, functionality: fully functional, machine/vehicle number: 01113, total width: 2,180 mm, total length: 12,200 mm, bale length: 500 mm, bale height: 400 mm, pressing force: 350 t, overall weight: 34,000 kg, Ecotecnica shear baler mod. 2535, year 2013, with approximately 5,000 operating hours, in good working condition and complete with documentation. Machine suitable for compressing and shearing ferrous scrap, including sections, sheet metal, and mixed scrap. Technical data: Shear force: 350 tons Operating hours: 5,000 Compression box length: 5.0 m Box width with wings open: 1.70 m Bale size: 500 x 400 mm Total length: 12.20 m Width: 2.18 m Weight: 34,000 kg Equipment: Iveco diesel engine, 172 HP Radio remote control Lajdpfx Asy Ibw Tjhash Complete documentation Machine is fully functional and ready to use. Inspection and testing possible.

Condition: new, Chain hoist, model VS///, lifting capacity 5000 kg, lifting height 3 m, with load hook · Robust steel sheet housing · Easy operation and smooth chain movement thanks to precise chain guidance · Galvanized and yellow-chromated brake parts increase corrosion protection · High-strength, galvanized round steel chain · Other technical features: Design: device with chain (for standard lifting height) · Subject to mandatory testing: yes Design: device with chain (for standard lifting height) Lifting height: 3 m Lifting capacity: 5000 kg Laodpfxs Ab I Iao Ahash Lifting force at rated load: 44 daN Equipment: with load hook Overall height (inner edge of device/load hook): 644 mm Weight at standard lifting height: 38.7 kg Number of chain strands: 2

Condition: new, Chain hoist, model VS///, lifting capacity 3000 kg, lifting height 3 m, with lifting hook · Robust steel sheet housing · Easy handling and smooth operation of the load chain due to precise chain guidance · Galvanized and yellow-chromated brake parts increase corrosion protection · High-strength, galvanized round steel chain · Further technical features: Design: Device with chain (for standard lifting height) · Subject to mandatory testing: yes Ljdpfxo Ab I H Ae Ahaeah Lifting height: 3 m Design: Device with chain (for standard lifting height) Overall height (inner edge of device/lifting hook): 644 mm Weight at standard lifting height: 28 kg Number of chain strands: 1 Equipment: with lifting hook Lifting force at rated load: 52 daN Load capacity: 3000 kg

Condition: used, Labotek Type: FMD-M-M-15-15-V, Model 101134 The Labotek FMD-M-M-15-15-V model belongs to the FMD-M series from Labotek, a leading manufacturer of systems for material drying, dosing, and conveying in the plastics industry. The FMD-M series includes modular dryers designed for processing plastic granules. Technical specifications of the FMD-M series: Type designation: FMD-M 15/15 Dimensions: 80 x 120 x 120 cm Net weight: 88 kg Shipping weight: 113 kg Shipping dimensions: 80 x 120 x 120 cm Laodszii Dbepfx Ahaeh Shipping volume: 1.15 m³ These dryers are designed for processing plastic granules and are characterized by their modular design, which allows for flexible adaptation to various production requirements. Volts: 3x400 Vac+PE Amps: 10.4 Amps Overcurrent protection: 16 Amps kW: 2.6 kW HZ: 50/60HZ The Labotek AVR3G is an industrial vacuum conveyor with a capacity of 1 liter, designed for the automatic conveying of free-flowing plastic granules. It is particularly suitable for small to medium-sized production facilities where space and weight are critical. Technical data of the Labotek AVR3G (1 liter): Capacity: 1 liter Conveying capacity: Up to 15 kg/h Conveyed medium: Free-flowing, granular raw material (minimum grain size of 3 mm) Operating noise level: Below 69 dB Material contact surfaces: Stainless steel AISI 304 Maximum material temperature: 80 °C Alarm function: In case of material shortage Power supply: Compatible with 50/60 Hz Weight: 88 kg Condition: used Scope of delivery: (See picture) (Subject to changes and errors in technical data and specifications!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), functionality: fully functional, Infinitely variable speed: 150 – 2000 rpm Spindle taper: ISO 30 Feed on X-axis, infinitely variable: 15 – 250 mm/min Lsdpfxsz Ilibj Ahaoah Travels: X = 280 mm, Y = 170 mm, Z = 250 mm • Universal swivel and tilting table

Condition: new, Lever hoist, model AL, lifting capacity 3000 kg, lifting height 1.5 m, housing made of aluminum alloy. * Compact design * Housing and hand lever made of lightweight alloy * Precise gearbox and high-quality needle bearing * User-friendly * Universally applicable * Low maintenance * Low weight * High-strength, galvanized round steel chain according to EN 818-7 * Short hand lever * Chain disengagement Lsdpfxs Ab Nfys Ahaoah * Further technical features require testing: yes Weight with chain: 18 kg Number of load strands: 1 Material: Housing made of lightweight alloy Lifting height: 1.5 m Lifting capacity: 3000 kg

Condition: used, functionality: fully functional, Year of construction: 2013, operating hours: 80,087 h, machine/vehicle number: S2321M0007, control type: CNC control, controller manufacturer: SIEMENS, controller model: SINUMERIK, laser type: fiber laser, laser source manufacturer: TRUMPF, laser source model: TruFiber, laser power: 400 W, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, TECHNICAL DETAILS General Information Model: TruLaser Cell 3000 Machine type: highly dynamic and precise CNC laser machine Machine bed: polymer concrete Axis concept: cantilever system Travel ranges and axes Travel ranges X/Y/Z: 800 × 600 × 400 mm X/Y axes: linear motors Measuring system: direct, absolute measuring system Z axis: linear guides and ball screw drive Control and operation Control system: TRUMPF based on Siemens Sinumerik 840D sl Operation: panel PC for process monitoring Cooling and electrical system Control cabinet: integrated Water cooler: water-air Laser unit Laser unit: TruFiber 400 (G2) Laser type: single-mode fiber laser Application area: welding and cutting Laser power: 400 W at the fiber end Beam quality M²: 1.1 Fiber optic cable: 6 m LLK-B Operating mode: CW / modulated Modulation frequency: max. 50 kHz Pilot laser: standard Coil feeder Ledpfx Asz R Dz Aohaeah Manufacturer: TRUMPF Design: for strip material Material length: max. 800 mm Material thickness: 0.1–1.9 mm Material width: 40–250 mm Width adjustment: by handwheel Pneumatic coil feed: 50 mm stroke, right EQUIPMENT Tensioning and guiding module for coil material Guided workpiece removal, selectable as box or funnel system Pneumatic coil feed Coil feed control Panel PC for process monitoring Integrated control cabinet Water-air cooler Commissioning and training

Condition: reconditioned (used), Universal Tool Milling Machine Brand: harich (DECKEL) Model: B (FP 2) stepless Refurbished with CE Geometric acceptance with inspection protocol Laodpfx Asvfdatjhaeh With warranty Accessories: - 3-axis digital readout FAGOR Innova 30i-M - Fixed table or universal table - Vertical milling head SK 40 - Centralized lubrication, manually operated - Coolant system - Operating manual CE and Safety Equipment: - New machine electrics with control cabinet - Electronically monitored cover on vertical milling head - Chuck guard with electrical interlock - Drive motor with brake function - Control panel with emergency stop, release, start, and stop buttons, potentiometer for feed rate adjustment - New documentation for machine and control cabinet - CE declaration of conformity

Condition: new, Chain hoist, model VS///, lifting capacity 2000 kg, lifting height 3 m, with lifting hook * Robust steel sheet housing * Easy handling and smooth chain operation thanks to precise chain guidance * Galvanized and yellow-chromated brake parts increase corrosion protection * High-strength, galvanized round steel chain * Other technical features: Design: Unit with chain (for standard lifting height) * Subject to mandatory testing: yes Lifting capacity at rated load: 54 daN Design: Unit with chain (for standard lifting height) Overall height (inner edge of unit/lifting hook): 576 mm Lifting height: 3 m Number of chain strands: 1 Load capacity: 2000 kg Lodpfx As Ab I Hvehaoah Weight at standard lifting height: 18 kg Equipment: with lifting hook

Condition: new, Chain hoist, model VS///, lifting capacity 3000 kg, lifting height 3 m, with load chain * Robust steel sheet metal housing * Easy handling and smooth load chain operation due to precise chain guidance * Zinc-plated and yellow-chromated brake parts increase corrosion protection * High-strength, zinc-plated round steel chain * Further technical features: Design: Device with chain (for normal lifting height) * Subject to mandatory testing: yes Weight at normal lifting height: 24.7 kg Ljdpfxs Ab I H Nj Ahajah Overall height (inner edge of device/load hook): 596 mm Lifting height: 3 m Lifting capacity: 3000 kg Number of chain strands: 2 Lifting force at rated load: 41 daN Equipment: with load chain Design: Device with chain (for normal lifting height)

Condition: used, Used Zanchetta container mixer, type C.T. 500 FS, stainless steel pharmaceutical mixer with 2 pcs stainless steel polished containers, approx. 500 litres. Lodpfx Aexld Hpshasah

Condition: good (used), Year of construction: 2019, operating hours: 12,150 h, load capacity: 1,600 kg, lifting height: 5,200 mm, fuel type: electric, mast type: triplex, construction height: 2,270 mm, Year of construction: 2019 Laedpfxjz Rvhbo Ahash Field of application: Internal logistics

Condition: used, Ifsys Type: 114100 Type: VL 13 Servo press Hopper system with 2 x Vibroliner and 2 x Vibrohopper 1 x Return conveyor 2 x Control unit FC 1000 Condition: used Scope of delivery: (See picture) Lodpfx Aszd Rk Eshaoah (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone.