Used Linx 7900 for sale (44)

Condition: like new (used), Year of construction: 2001, operating hours: 10,356 h, travel distance X-axis: 1,800 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,100 mm, nominal power (apparent): 44 kVA, controller manufacturer: Heidenhain TNC 430, workpiece weight (max.): 5,000 kg, total height: 4,200 mm, total length: 7,900 mm, total width: 8,800 mm, spindle speed (min.): 10,000 rpm, Year of construction: 2001 CNC controller: Heidenhain TNC 430 Axes X-axis travel mm: 1800 Y-axis travel mm: 2000 Z-axis travel mm: 1100 C-axis degrees: 360º (0,001) B-axis degrees: -7/+187º Feed rates m/min: 60/40/40 Rapid traverse m/min: 60/40/40 Milling/turning table nc: Table dimensions mm: Ø1700x1400 Max. workpiece weight kg: 5000 Table rotation speed rpm: 200 Spindle Spindle speed rpm: 10000 Spindle drive power kW: 44/32(40%ED/cont) Spindle torque Nm: 288/187 (40/100%ED) Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 900 Tool system Tool holder: HSK-A 100 Tool magazine slots: 60 Tool changer: Double gripper Chip-to-chip time s: 13.5 Equipment Electronic Handwheel Chip conveyor Gisdpoyq Rpcjfx Almot Infrared probe Internal cooling lubricant supply Rotating inspection windows Rinsing gun Operating mode 4 Tool breakage probe Machine running times Under power: 132612 Spindle Working: 68009 Basic machine dimensions / weight Length mm: 7900 Width mm: 8800 Height mm: 4200

Condition: used, MULTIHEAD TUBE CUTTING MACHINE MAIR TRA3000/7/8 Scope of supply: 1 Loading table with: - Motorised slings loader, to load the complete bundle - Lateral chain transport conveyor, to introduce the tube 1 by 1 - Top support with vertical adjustment (to avoid loading of 2 tubes when working with small diameters) - Length stop and tube loader 2 Cutting machine TRA3000 with: - 7 independent cutting heads - All cutting heads can be lifted independently - Linear guide with scale for positioning of the cutting heads - Centralised tube transport system with production cycle adjustment 3 Double collecting cradle RA3, with: - Independent cradles, to collect the cut tubes - Lateral separators between cradles, to adapt the cradle length to the tube length - Motorised endless slings for soft tube collection. Gsdpfx Aljymaw Usmsit Note: with the double craddle system, it is possible to make the bundling and strapping in collecting craddle nº1, while production continues, without machine stop. 4 Main electrical cabinet and operator control panel NOTE:  This machine has worked very few hours.  Mechanical condition is very good.  It only requires cleaning & repainting to be “as new” Max. input tube length: 8000 mm Bundle Loader: 3 Tn Max. loading capacity: 3000 Kg Round tubes (outer Ø): 12-60 mm Square tubes (HxW): 12x12-40x40 mm Rectangular tubes (HxW): 12x16-50x30 mm Thickness Min.-Max.: 0.8 - 3.0 mm (depending on yield) Cutting lengths: 330 - 7900 mm Max. straightness tolerance: 1 mm/m Number of cutting heads: 8 Motors power: 2.2 kW Cutting disc diameter: 300 mm

Condition: excellent (used), Year of construction: 2007, Type: KUX750VAC Serial number: 12110 Year of construction: 2007 Bowl capacity: 750 litres Knife speed: variable, 60 - 3300 RPM Mixing speed: 150 RPM Bowl speed: 4, 7, 10, 14 RPM Power: 3 x 380V, 50Hz, 273kW Compressed air: 6 - 10 Bar Giedpfxsw Rfaie Almjt Water: 2 - 6 Bar Dimensions: 4330 x 3700 x 3050 mm (open lid) Weight: 7900 kg With double lifter for 200L tote bins and unloader

Condition: like new (used), Year of construction: 2000, operating hours: 33,831 h, travel distance X-axis: 1,250 mm, travel distance Y-axis: 880 mm, travel distance Z-axis: 800 mm, controller model: '3D contouring control Millplus, workpiece weight (max.): 1,000 kg, total length: 7,000 mm, total width: 3,500 mm, overall weight: 3,902 kg, spindle speed (min.): 18,000 rpm, spindle motor power: 15,000 W, Year of construction: 2000 CNC controller: '3D contouring control Millplus Gedjxvrbiepfx Almoit Axes X-axis travel mm: 1250 Y-axis travel mm: 880 Z-axis travel mm: 800 C-axis degrees: 360º (0,001) Feed rates m/min: 40 Rapid traverse m/min: 40 Milling/turning table nc: Number of pallets: 1 Table dimensions mm: Ø1000 Max. workpiece weight kg: 1000 max. torque Nm: 7900 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 15/10 (40%ED/cont) Cooling Tank capacity: 600 Tool system Tool holder: CAT 40 Tool magazine slots: 60 Tool changer: Doeble gripper Equipment Electronic Handwheel Chip conveyor Internal cooling lubricant supply Rotating inspection windows Rinsing gun Preapared for RENISHAW sonde Accuracy package Ready for internal cooling (40/80 bar) Paper band filter Machine running times Under power: 33831 Spindle Working: 6328 Rated power kVA: 55 Basic machine dimensions / weight Length mm: 7000 Width mm: 3500 Height mm: 3902

Condition: used, Year of construction: 1989, Schäfer SVRM 3500/12 - CNC 4-Roller Plate Bending Machine - Siemens CNC control with joystick for roller positioning and digital display (upgraded in 2006) - Hydraulic tilting of the top roller via control panel - Rollers made of hardened material with a strength of 900 N/mm² - Year of manufacture: 1989 Technical Data - Max. sheet width: 3500 mm - Roller barrel length: 3550 mm - Max. sheet thickness (bending): 12 mm - Max. sheet thickness (pre-bending) 4xS/3xS: 8 / 6 mm Gijdpfx Aljylyh Dsmjt - Max. yield limit of sheets at 20% cold work hardening: 380 N/mm² - Top & bottom roller diameter: 360 mm - Side roller diameter: 290 mm - Smallest achievable bending radius: 220 mm - Feed speed, bottom roller: 200 mm/min - Feed speed, side rollers: 700 mm/min - Total installed power: 22 kW - Electrical system: 380 V / 50 Hz / 3 Ph - Space requirements including control, hydraulics & roller conveyor (WxHxD): approx. 7900 x 3300 x 4600 mm - Pit depth: 900 mm - Machine weight: 21,100 kg

Condition: good (used), functionality: fully functional, Year of construction: 2006, operating hours: 435 h, load capacity: 450 kg, lifting height: 7,900 mm, platform length: 2,130 mm, platform width: 1,100 mm, empty load weight: 2,130 kg, transport length: 2,130 mm, transport width: 2,170 mm, fuel type: electric, tire condition: 70 %, Electric scissor lift 9.9m SKYJACK SJ-III 4626 personnel lift Skyjack manufactured personnel lift, scissor lift, lifting platform Electric scissor lift SkyJack SJ III 4626 Year of manufacture:2006 Operating hours: 435 hours Working height: 9900 cm Platform height 7900 mm; Platform length: 2100 mm Platform extended: 3150 Platform width: 1070 mm Gjdpfsvzq Snox Almeit Capacity: 454 kg / 2 people + tools./ Built-in battery charger Battery condition: ca 70% Own weight: 2170 kg Overall length: 2330 mm Overall width 1170 mm Overall height: 2260 mm

Condition: excellent (used), Year of construction: 2005, KM 500/2700C2 Technical Specifications Clamping Side: Clamping Force: 5000 kN Tie Bar Dimensions (H x V): 900 x 800 mm Minimum Installation Height: 480 mm Maximum Platen Distance: 1650 mm Centering: 200 mm Mold Weight: 7900 kg Injection Side: Screw Diameter: 80 mm Displacement: 1433 cc Injection Pressure: 1829 bar Gisdpjx Uqawofx Almet Equipment: MC 4 Control System Core Pulls: 2+2 Machine is sold without robots and peripherals!

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, travel distance X-axis: 762 mm, travel distance Y-axis: 460 mm, travel distance Z-axis: 460 mm, WE OFFER AN VERY GOOD CONDITION OKUMA MU 400 VA WITH NEW SPINDEL ON 2022 INCLUDED COMPLETE EQUIPMENT AND FULL TOOLINGS INSIDE TOOLCHANGER. MACHINE - Okuma MU400VA 5 AXIS CNC Vertical Machining Centre (2006) Description: Main Drive Spindle speed range 15000 RPM Spindle motor power (10min/cont.) 22.5/18.5 kW Tool taper BT40 BIG+ Movement X-Axis Movement 762 mm Y-Axis Movement 460 mm Z-Axis Movement 460 mm 1-AXIS Movement +20/-110 2-AXIS Movement 360 DEGREES Tools Godsvmithopfx Almoit Slots in storage 20 Additional Equipment Automatic tool changer cooling through spindle at 30 bar control OSP200 DIMENSIONS AND WEIGHT Measurements width 2500 Measurements depth 2800 Measurements height 2950 Machine weight 7900 kg

Condition: good (used), Year of construction: 2003, For sale: Fuji Flowwrapper type: FW3410 B year of construction: 2003 all stainless steel Including Linx TT5 printing system - year of construction: 2015 Including de Koningh laser system and an ALTech sticker machine - model ALritma S - year of construction: 2017 It is possible to view the machine here on location. If you have any questions or comments, we would like to hear them! Everything is ready for transport. With kind regards, Giedpfjvkfz Njx Almjt Leo Holland

Condition: good (used), Year of construction: 1995, For sale: Fuji Flowwrapper Giodpfxjvkf Ntj Almst type: FW3400 B year of construction: 1995 including stainless steel infeed belt. (4.50 meters long) Including Linx TT5 printing system - year of construction: 2015 Including de Koningh laser system and an ALTech sticker machine - model ALritma S - year of construction: 2017 It is possible to view the machine here on location. If you have any questions or comments, we would like to hear them! Everything is ready for transport. With kind regards, Leo Holland

Condition: used, mileage: 2,659 km, power: 188 kW (255.61 HP), first registration: 08/1983, overall weight: 7,899 kg, fuel type: diesel, color: orange, axle configuration: 4x4, tire size: 14.5r20, operating hours: 1,488 h, machine/vehicle number: 573, Equipment: all wheel drive, compressor, differential lock, hydraulics, second-hand vehicle warranty, TUV Can be made on request , The Intrac are in good condition directly from the authority (Swiss Army) Super maintained and checkbook maintained, see photo, the body is in good condition , The Intrac 2011 is equipped with: 4 steering positions, all-wheel drive, differential locks, 1 seat plus emergency seat , High off-road capability for extremely heavy winter service. The snow blower can also be set at an angle. Tire size 14.5R20, the drive is fully hydraulic with fast and creep speed, total weight is 7900 kg, displacement 12756cm? , , 24Volt power supply , There are also several defective Intrac 2011 with wheel and chain drive still in stock at a price of 8000,- € net each Gijdpeqx Sz Dsfx Almjt All my vehicles can be seen on my homepage. - You are now rushing back and forth from Flensburg to Berchtesgaden to look at the different cars, but you will find over 150 vehicles of the following types here: - Hanomag AL 28, Magirus Deutz, MAN, Steyr, Dodge WC, Saurer, Unimog, GMC 6x6, Steyr-Puch, Iltis, Willys, G-model, Mowag, DB, etc., all with TUV. - even with TUV. - There are also an unimaginable number of spare parts and accessories. - Why would you settle for anything less? - Give us a callGreetings, Philipp

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4300x1650x2520 mm Weight 7900 kg Gijdpfsv A Hlyox Almst Total power requirement 108 kw

Condition: used, Name: Filter Press Manufacturer: MSE Type: KFP1000-90/60-25 Year built: 2011 Construction form: Side beam press Filter pressure:: 15 bar Press content: Approx. 1177 liters (expandable to 1766 liters) Cycle: Open Filter area: Approx. 101 m2 (expandable to 152 m2) Plate size: 1000 x 1000 mm Number Plates: 60 (expandable to 90) Plate material: Polypropylene Plate Transport: Automatically Filter cloth washer: No Cake thickness: 25 mm Closing pressure: 350 bar Dimensions: L 7900 x W 1950 x H 2000 mm Empty weight: approx. 1400 kg Technical doc.: Yes Accessories: Drip trays, 25 replacement plates, control cabinet, hydraulic system, light curtain Condition: Second hand Gedpjrmmp Isfx Almsit Price: On demand

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 4200x1650x2250 mm Weight 7900 kg Total power requirement 54 kw Gijdev A Hltepfx Almst

Condition: ready for operation (used), Varian 640-IR FT-IR Spectrometer The Varian 640-IR is a high performance spectrometer that makes FT-IR spectroscopy easy. With a range of unique, user-friendly hardware and software features, you can quickly become productive. Spectral range: 7900 - 375 cm-1 Gijdpjry Tqrjfx Almst Spectral resolution of at least 0.25 cm-1 Signal-to-noise ratio (the number of scans is 100, with a standard configuration with a spectral resolution of 4 cm-1): at least 10000 cm-1 The level of pseudo-scattered light is not more than 0.1% Integration time: 5 s Monochromator: High-speed Cerny-Turner No software Description has been adopted. You are welcome to come by for a viewing. We will be happy to arrange a cost-effective forwarding agent for you. organize You will receive a proper invoice. A net invoice can also be issued for foreign customers. Prerequisite is a valid VAT number. Subject to prior sale. Visit our store and have a look at our other offers. Company names and trademarks are the property of their owners and are used only to identify and describe the products. Deviations from technical data and errors in the description of the article may occur and are reserved.

Condition: new, HIGH PERFORMANCE - BUILT FOR PROCESSING SINGLE, DOUBLE, AND HEAVY-DUTY BOARD! Main features: - 40+ pre-installed FEFCO styles, 100+ available box shapes - One-pass operation for seamless box production - Supports single, double-wall, and high-strength board - Works with sheets and concertina board - Integrated die-cutting system - Fast tool changeover - less than 20 seconds - Fully automatic servo drive setup - Large 19" touchscreen HMI with intuitive software - Slotting, creasing, cutting, gluing, and printing in a single operation - Detachable feeder (compatible with manual or vacuum feeding) - Remote diagnostics and updates via integrated VPN connection _____ Optional functions and upgrades: - Gluing system - synchronized cold glue application device - miniFLEXO - compact single-color flexo printer - Flexomat - full-format flexo printer - Vacuum feed system - compensates for sheet curvature - 3D scanner - automatic product scanning and data entry - Automatic box folding system - Fully automatic production line _____ Technical data: - Power supply: 3 x 380/415/480 V - Installed power: 8.5 kW - Production efficiency: Up to 500 boxes per hour - Maximum box size: 2400 mm (94") width x 9999 mm (394") length - Minimum box size: 250 mm (10") width x 750 mm (30") - Slot width: ~7-8 mm (~5/16") - Machine footprint (L x W x H): ~3600 x 1900 x 1750 mm - Machine weight: ~3800 kg (7900 lbs) For further information, contact us, we are happy to help you Gedpfxowrrfcj Almeit

Condition: excellent (used), DOPPSTADT MECHANICAL ROLLER SHREDDER mod: DW 3060 E1 COMPLETE WITH ENGINE, HYDRAULIC CONTROL BOX, EXTRACTION BELT AND ELECTRICAL PANELS Year: 2005 Dimensions: Total length: mm 7900 Overall width without catwalk: mm 2950 Gedpfxsun Sx Se Almoit Total height: mm 5600 Loading width: mm 1900 Loading length: mm 3060 Total weight: kg 30,000 approx. With motor: kw 315 Rotation speed: 2000 rpm With hydraulic power unit: kw 7.5 Cutting roller dimensions: Length: mm 3000 Rotor diameter: mm 600 Speed: 31 rpm Rotor: 1 Number of rotor teeth: 21 Teeth width: mm 60 Teeth height: mm 150 Rotor protection wear band material: Hardox 400 Comb: 1 Number of comb teeth: 22 Comb teeth width: mm 60 Useful extraction belt width: mm 1000 Installed power: kw 5.5

Condition: excellent (used), Year of construction: 2019, Roland SolJet PRO 4 XR-640 Eco-solvent and cut-to-length printer - 1,63 cm wide CISS ink system - ink is about 40% cheaper. The equipment is very little used, is in production and can be viewed / tested. Printing speed up to 49,1m2/hour. It has been designed for high production yet combines all of Roland's unique and innovative applications plus some new ones. Among its main features are quality and speed as well as the ability to achieve metallic shades, printing on transparent materials and a significant colour tone enhancement, making it the world's first utility to use Light Black outdoor ink. The Roland SolJet Pro XR-640 provides quality prints with EcoSol Max2 inks, strong colours with high durability. The ink has a very low odour. Best quality for indoor and outdoor at the most common width. Very high productivity with low maintenance. Giedpfjmcw Twox Almjt Maximum material width:1.625 mm; - Maximum print resolution: 1440 dpi; - Variable Droplet with 7 different droplet sizes; - A new generation of EcoSol Max 2, Nickel-free, eco-friendly inks; - Banding-free printing even at high speeds; - Evolved roll feed system; - Take up roll rewind system (works for printing and cutting); - Automatic maintenance & head cleaning system; - Built-in Heater/Dryer; - VersaWorks RIP Roland; - Variable data printing; - Print time and cost calculation; - New Light Black colour; White and silver ink; - Metallic Colours; Printing & Cutting; - Four different colour compositions; EXW old price 9900 euro - new price 7900 (without VAT in EU)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, number of ink cartridges: 5, total width: 1,600 mm, year of last overhaul: 2024, input voltage: 220 V, working width: 1,600 mm, product width (max.): 1,600 mm, roll diameter: 1,600 mm, roll width: 1,600 mm, tank capacity: 3 l, HP Latex Printer 375 - 3 liter ink cartridges Only 4500 sqm Last complete service, including change of print heads - July 2024 Average maximum width - 1,63 cm; Soft RIP Caldera (without PC). Stand, media feed roller, media take-up roller and tension adjustment kit; High precision for material movement; Registration - automatic control of the fit on the sheet, including front/side; Maximum resolution 1200 X 1200 dpi; Automatic double-sided banner printing; 6 print heads - 2 for cyan and black, 2 for magenta and yellow, 1 for light cyan and light magenta and 1 for latex optimizer; Defective nozzle detection and replacement system. Banding elimination solution; Latex-based ink. Barrels of 3 liters; Resistance to scratching; Built-in spectrophotometer for ICC profiling and automatic calibration; Optimized solution for banding removal; Complete drying right inside the printer so that the product is delivered dry and ready for lamination or packaging; Low warm-up time 90 seconds; Automatic feed adjustment; Giodpfx Aemcw Tljlmet Ink collector for printing on porous textiles. EXW - old price 9900 euro - new price 7900 euro without VAT