Used Mahros Ponte C/S for sale (89,258)

Condition: as good as new (ex-display), Year of construction: 2026, CNC Machining Centers Rover Multi Up M C S Working Area*: X = 3280 mm; Y = from 1580 to 1660 mm, depending on work conditions Z = 200 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 74 mm Z = 245 mm – 5-axis machining unit and drilling unit, with vacuum modules H = 29 mm Workpiece Clearance*: Y = 1900 mm Axis Travel*: X = 3706 mm; Y = 2294 mm; Z1 = 515 mm; Z2 = 371 mm VACUUM SYSTEM Subdivision of the vacuum system into 2 working zones and 2 clamping zones in X. AUXILIARY VACUUM SYSTEM – 2 zones Allows clamping of workpieces using vacuum templates. Remote Control RM850 Rover Multi Up M C S Panel – Multi Purpose Regular Configuration 2 Compatible with the turret tool magazine with 16 positions and the side tool magazine with 12 positions. The tool magazines can also be retrofitted. Uninterruptible Power Supply (UPS) for machine PC. 6 ATS workpiece supports – 18 module carriers Fpedoy Ehrxopfx Afujn — 6 aluminium workpiece supports. The positioning of the workpiece supports is via linear guides with ball bearing slider blocks. Clamping is performed on the front and rear linear guides via pneumatic cylinders. Clamping is released by a push button located at the front of the workpiece support. — 18 module carriers, 132 x 132 x H 41.5 mm, with independent pneumatic clamping. The vacuum modules can be rotated in 15° increments on the module carriers; an ideal solution for shaped parts. — 18 covers for module carriers without template. SA (Set-Up Assistant) working table for tables up to 1550 mm. Supported manual positioning system with motion direction indicator and position indicator. — Sensors on each working table and along the X-axis of the working area. — Display of direction and position achieved for the carriage during positioning phase, mounted on each working table. According to the programmed configuration of the working tables, the system indicates the direction of movement for each working table and carriage, and confirms with a green LED and audible signal when the correct position is reached, with a tolerance of +/- 1.5 mm. Subdivision of the pneumatic system into 2 working areas in X. Machining unit with 5 interpolating axes, 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled – 20,000 rpm Extraction hood with 12 NC-controlled positions for the 5-axis electrospindle. Flange for preparation of a 5-axis interpolating machining unit for mounting aggregates. Coolant system Additional Z-axis carrier for rear machining units, with independent Z-axis. Drilling head BH 24 L Side tool magazine with 12 positions, integrated into the machine bed. Turret tool magazine with 16 positions, installed directly on the X machining unit. HSK F63 tool adapter, equipped with a long integrated flange, for saw blades on the 5-axis head. Saw blade 300 mm, for tool holder. Hi-Tech tool set Complete set of tools for the acceptance test Consisting of the following 9 parts Replacement of standard PC with a high-performance PC. Digital device for measuring tool length up to 130 mm diameter. bSolid NC-HOPS 8 MacroCAM Rover 1. AV NC-HOPS MacroCAM 1. License WorkCenter suction cup proposal 5-Axis Simultaneous Material removal simulation 12-month warranty period Location: ex stock 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2007, 3 x Frech die-casting machines DAW 80F RC, year of manufacture 2003, DAW 125 S DV, year of manufacture 1999, Fpedjz Hkg Aepfx Afusn DAW 125 F, year of manufacture 2007.

Condition: used, mileage: 118,851 km, power: 265 kW (360.30 HP), first registration: 08/2023, fuel type: diesel, number of seats: 52, gearing type: automatic, emission class: euro6, color: red, brakes: retarder, total length: 18,060 mm, total width: 2,550 mm, total height: 3,160 mm, Year of construction: 2023, Equipment: ABS, air conditioning, fog lights, power assisted steering, traction control, = Additional options and accessories = - Autoradio - CD - Climate control - EBS - Electrically operated mirrors - Heater - Hydraulic power steering - Light alloy wheels - Reverse camera - Sun visor - Tachograph = More information = Fodpfx Aez I Nhbofuopn Engine capacity: 9.037 cc Make of engine: MAN Tyre tread remainder on axle 1: 60% Availability: in stock

Condition: used, Year of construction: 2016, Overview This tray former and case sealer packaging module was manufactured in 2016 by Denmark SOCO SYSTEM A/S. The system consists of an automatic tray former and a case sealer designed for fully automated carton handling in packaging lines. The tray former erects flat carton blanks into trays, which are transferred via conveyor to downstream processes, while the case sealer applies self-adhesive tape to close cartons after filling. Technical data  - Capacity: 12 – 14 cycles/min (tray former) - Application: Carton forming and sealing - Configuration: Automatic tray former with pneumatic forming system and automatic case sealer with tape sealing - Utilities: - Voltage: 3 × 400 V - Frequency: 50 / 60 Hz (tray former), 50 Hz (case sealer) - Air consumption: approx. 31.3 Nl/cycle (tray former), approx. 0.6 Nl/cycle (case sealer) - Air pressure: 0.6 – 1.0 MPa - Rated current: 2 A (tray former), 3 A (case sealer) Scope of Delivery  Fodpfsyxxxvsx Afuopn - Tray former | SOCO SYSTEM A/S | BE 2200 ATS R | 2016 | Automatic tray former with pneumatic forming system and HMI control - Case sealer | SOCO SYSTEM A/S | T-402 | 2016 | Automatic tape case sealer with conveyor integration

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, overall weight: 7,990 kg, CHIRON FZ 18 S MAGNUM HIGH SPEED – 1998 – after a comprehensive factory overhaul by CHIRON For sale is a CHIRON FZ 18 S MAGNUM High Speed vertical CNC machining center manufactured in 1998. The machine is equipped with Siemens SINUMERIK control, an automatic tool changer, and a high-speed spindle designed for efficient and precise machining. It also has an oil mist extraction system with a filter. The most important advantage of the offered machine is the comprehensive inspection and overhaul carried out in 2020 by CHIRON. As part of the work, key machine components were replaced, including: spindle, control computer, pumps, systems, and other components included in the modernization program. Complete service documentation is available for the work performed, confirming the scope of the overhaul. Technical data: Manufacturer: CHIRON Model: FZ 18 S MAGNUM High Speed Year of manufacture: 1998 Control: Siemens SINUMERIK Machine number: 493-01 Weight: approx. 7,990 kg Fjdpfszdkhqsx Afuopn Power supply: 400 V Connected power: 27 kVA Automatic tool changer Vertical CNC machining center The machine is complete and ready for further operation. Thanks to the comprehensive overhaul carried out by the manufacturer, it represents an attractive alternative to much more expensive, newer machining centers. Complete CHIRON overhaul documentation from 2020 is available. Inspection and verification of the machine's condition on-site are possible.

Condition: used, machine/vehicle number: 008288, Position 1: Panel Feeding and Loading SCM-MAHROS - STEFANI - CELASCHI Position 2: Double Sided Squaring/Edgebanding Machines SCM-MAHROS - STEFANI - CELASCHI Position 3: Panel Turning Device SCM-MAHROS - STEFANI - CELASCHI Position 4: Double Sided Squaring/Edgebanding Machines SCM-MAHROS - STEFANI - CELASCHI Position 5: Panel Turning Device SCM-MAHROS - STEFANI - CELASCHI Fedpfx Aex Nv S Uofuopn Position 6: Splitters SCM-MAHROS - STEFANI - CELASCHI Position 7: Panel Stacking and Offloading SCM-MAHROS - STEFANI - CELASCHI

Condition: excellent (used), Year of construction: 1998, HIRON FZ 18 S MAGNUM HIGH SPEED – 1998 – after a major factory overhaul by CHIRON For sale: a vertical CNC machining center, CHIRON FZ 18 S MAGNUM High Speed, manufactured in 1998. The machine is equipped with a Siemens SINUMERIK control system, an automatic tool changer, and a high-speed spindle designed for efficient and precise machining. It also features an oil mist extraction system with a filter, plus air conditioning for the control system. The most important advantage of the offered machine is the major inspection and overhaul carried out by CHIRON in 2020. As part of the work, key machine components were replaced, including: spindle, Fpodpjzdklpefx Afusn control computer, pumps, systems, and other components included in the modernization program. Complete service documentation is available, confirming the scope of the overhaul. Technical specifications: Manufacturer: CHIRON Model: FZ 18 S MAGNUM High Speed Year of manufacture: 1998 Control system: Siemens SINUMERIK Machine number: 493-01 Weight: approx. 7,990 kg Power supply: 400 V Connected power: 27 kVA Automatic tool changer Vertical CNC machining center The machine is complete and ready for further operation. Thanks to the major overhaul performed by the manufacturer, it represents an attractive alternative to much more expensive, newer machining centers. Complete CHIRON overhaul documentation from 2020 is available. Inspection and verification of the machine's condition on-site are possible.

Year of construction: 2014, condition: ready for operation (used), A T-S-I mixing and dosing system for adhesives is available. System type: two-component gear pump dosing system, material type: 2K silicone, swivel arm length: 1200mm, hose length: 2500mm, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1800mm, weight: approx. 650kg. Documentation available. On-site inspection is possible. Fpjdpfjwfg E Dsx Afuon

Condition: used, Year of construction: 1989, With sanding units consisting of: - 1 calibration roller - 1 combination unit with rigid pad Used Manufacturer: SCM Model: UNO C-CS Fpjdpfx Asy H N Tajfusn Year of manufacture: 1989 Machine no.: AE005036 REF.: 030514 Sanding width: approx. 920 mm Pass-through height: approx. 3-160 mm Number of units: 2 pcs., 1x15 kW Units from above: 2 pcs Belt dimensions (L x W): 1525 x 930 mm 2x feed speed: 4.5 / 9.0 m/min 1 pc calibration roller - grooved / rubber-coated 1 pc combination unit with rigid sanding pad - rubber-coated roller Extraction connection: D 2 x 160 mm Required space: approx. 1600 x 1500 x 1800 mm Weight: approx. 1200 kg Location: 97447 Gerolzhofen, free loaded, unpacked Transfer in as-is condition as inspected, without warranty or guarantee

Condition: ready for operation (used), Year of construction: 2010, RHV-C&V GmbH & Co. KG glass jar capper type: LW560 serial number: 10172/4184 Fsdpfxoyxgxws Afuepn year of construction: 09/2010 stainless steel conveyor belt, belt width: 120 mm

Condition: used, Double picking station feeder. Designed to serve production lines of drilling, squaring, edging, squaring, pantographing, sanding and painting without operator supervision. Fully automatic not need for manual adjustments during the manufacturing process Fpedsqvt Ecepfx Afusn Working dimensions: * Maximum length: 3000 mm * Maximum width: 1300 mm * Automatic double station panel unloading system. * Work capacity 13 minute cycles * Panel gripping system via motorized arm with suction cups with vacuum drive system TECHNICAL DETAILS TO BE CHECKED

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, New machine warranty, in-stock item, original packaging, available for immediate delivery. Equipped with a safety system for solvent-based substances according to DIN 1539. Matching loading carts in stock (see photo). Contact us! - Internal dimensions (W x D x H): 1000 x 1000 x 1500 mm - External dimensions (W x D x H): 1900 x 1430 x 2315 mm - Capacity: 1500 liters - Max temperature: 260°C - Controller: P570 / 50 programs, each with 40 freely programmable segments - NtLog for data logging via USB stick - Air circulation: 3600 m³/h - Exhaust air flow: 390 m³/h - Additional features: drive-in rails - Connected load: 39 kW - Net weight: 1150 kg - Including documentation, CE declaration Installation and commissioning available upon request. Inspection at our warehouse possible by appointment. We offer new and used industrial ovens. Contact us! Fsdel Dw T Aspfx Afuspn Keywords: Oven, Ovens, Drying oven, Firing kiln, Heat oven, Heating cabinet, Industrial oven, Convection oven, Convection chamber dryer, Tempering oven, Preheating oven, Temperature oven, Drying cabinet, Chamber kiln, Curing oven, Forced-air drying cabinet, Forced-air oven, Solvent oven, Chamber dryer, Paint dryer.

Condition: good (used), Year of construction: 1988, functionality: limited functionality, outer diameter: 2,000 mm, total height: 2,500 mm, total length: 5,200 mm, total width: 1,800 mm, inner diameter: 560 mm, overall weight: 5,000 kg, Equipment: documentation/manual, Max. load capacity – 10 t Fpedpfx Afoz Ri Arousn Strip width – max. 1600 mm Spreading – hydraulic, with adjustable pressure Spreading range – 460 – 520 mm; with extension jaws, expandable to 560 – 620 mm Unwinding speed – 30 m/min Strip guide rods – adjustable up to 2000 mm passage width Braking system – pneumatic; brake for mandrel and brake disc (Snout-Stop) with 3 brake pistons Hydraulic pressure roller – can be moved forwards and backwards Unwinding unit – can be moved by 2300 mm (for positioning) Travel path – limit switch on the reel and adjustable cams on the frame Lifting table – 400 mm stroke; with inclined supports for coil and tilting operations Coil material (tensile strength) – max. 470 N/mm² Sheet thickness – 0.5 – 3 mm Dimensions (L x W x H) – 5.2 x 1.8 x 2.5 m Documents/drawings – winding machine, unwinder, pressure roller unit, lifting table More information available upon request.

Condition: excellent (used), Year of construction: 2008, operating hours: 282 h, Calibration and finishing machine, wide belt sanding machine with electronic segmented sanding pad and finish sanding Ideal sanding machine for interior construction companies, also suitable for intermediate sanding of coated surfaces. Bookbinding machine with combined unit and electronic articulated pressure bar, edge segments can be switched on and off Segment width of the pressure bar 35mm Contact roller can be pneumatically adjusted, low wear due to corrugated steel roller Grain compensation Drive motor 7.5kW with automatic motor brake, stepless belt speed controlled by frequency inverter from 2 - 18 m/s Belt feed steplessly adjustable via frequency inverter from 2.5 - 13m/min Pneumatic workpiece-controlled belt blowing device Cleaning brush at the outlet Constant working height 900mm by adjusting the upper part of the machine, thus also integrable into sanding lines Feed belt still has good grip and is in very good condition Maximum sanding width approx. 1340mm Workpiece height approx. 3 to 150mm Common sanding belt dimension 1360 x 1900mm 3 rubberized pressure rollers Infeed roller table and foldable outlet table Preparation for vacuum blower. The belt is perforated and plugs for optional blower are available. Alternatively, the belt can also be connected to the extraction system. Extraction connection 1 x 200mm, 1 x 140mm and 2 x 100mm Terminal control with 50 programmable sanding programs for automated machine control. Parameters: Belt speed, feed speed, workpiece height, pressure bar engagement points at the front and rear as well as edge segments, belt blowing nozzle, optional vacuum blower, pneumatic adjustment of the calibration roller CE marking Operating manual without the illustrated connection cable Original paint, only touched up in places Approx. 282 operating hours, i.e. approx. 20 minutes per week. Dimensions approx. 1800 (with table 2600) x 2050 x 2150mm (LxWxH). Weight approx. 2400kg. Fedpfxszqvmro Afuopn The machine can be demonstrated on site by appointment. We only offer machines that are ready for demonstration and are in our warehouse, see "other offers from this provider".

Condition: excellent (used), Year of construction: 2019, Sawblade tiltable 45 ° Length of the rolling table 2500 mm cutting width 1250 mm Fpodpfoz E Sv Njx Afuon Motor output 4,0 kW Cutting height 90 mm Speed 4000 / 6000 U/min. weight of the machine ca. 650 kg

Year of construction: 2010, condition: excellent (used), Here, we offer a Heraeus Vötsch temperature testing chamber. Vötsch temperature testing chamber, test cabinet VLM 3068/S, air-cooled (top-loading test chambers for construction materials) Control panel The control panel is mounted on a console on the temperature testing chamber. All control and operating commands can be initiated by simply touching the function symbols. The operating manual for the control panel is included. Main switch The main switch is located at the front of the temperature testing chamber. Air handling unit The air handling unit is located in the test chamber and contains the components necessary for temperature control. In the air handling unit, the air is conditioned (cooled/heated) and circulated through the test chamber by the test chamber fan. The air is drawn in at the center of the side wall and re-enters the test chamber via the air guide plates on the long sides. Feedthroughs The temperature testing chamber can optionally be equipped with feedthroughs. These allow cables and testing equipment to be placed in the test chamber. Fpedpfxozgbmis Afujn Feedthrough at the front: 2 x 82 mm diameter, at the rear: 1 x 85 mm diameter Internal dimensions: width 2000 mm, depth 570 mm, height 600 mm External dimensions: width 3000 mm, depth 870 mm, height 1060 mm Technical data: Data for mechanical load: max. load with test specimen Test chamber floor (evenly distributed over the area) 600 kg Point load 50 kg Data for temperature tests: Temperature range -30 °C to +125 °C Temperature deviation over time in the center of the usable space ±1 K Temperature change rate Heating approx. 1 K/min Cooling approx. 2 K/min Data for operation: Rated voltage 3/N / PE AC 400 V ±10% 50 Hz Rated power 3 kW, rated current 9 A Fuse on customer side: 16A, slow-blow Temperature testing chamber VLM 3068/S Test chamber volume approx. 680 l Weight approx. 700 kg Refrigerant: R-404A Noise measurement: sound pressure level approx. 68 dB(A) Type: VLM 3068/S Condition: used Scope of supply: (See picture) (Changes and errors in the technical data and information are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, actuation type: hydraulic, cutting angle (min.): 0.5 °, cutting angle (max.): 2 °, sheet thickness (max.): 13 mm, back gauge: 1,000 mm, power: 18.5 kW (25.15 HP), overall weight: 17,000 kg, Equipment: CE marking, documentation/manual, finger protection, foot remote control, type plate available, Hydraulic shear LVD HST-C 40/13 Year of manufacture: 1995 Serial number: 22764 Technical specifications: Max. sheet thickness: 13 mm Cutting length: 4050 mm Back gauge range: 1000 mm Cutting angle: 0.5° - 2° Blade clearance: 0.1 - 2.2 mm Number of strokes per minute: 7 - 28 Number of holding points: 21 Motor: 18.5 kW Fpedpfx Afsz D Dnboujn Weight: 17000 kg Oil capacity: 300 l Voltage: 3 x 380 V Included options: Safety standards: CE 1 square arm support, length 1500 mm 2 additional supports, length 1500 mm

Condition: used, used, top condition, hardly used many equipment cleaned, function checked, manufactured by Hapfo-Columbus type C-S SINUS Fpsdpfxevwgfcs Afujn - vacuum enineering for individual form glueing and form veneering - C-S SINUS are suitable for easy and safe form glueing of round furniture parts per only one basic template (without contra template) - used outstanding for form veneering from easy profiles and roundings with commercial veneers or plastic covers - can be easy and rationally extensive form parts like bar desks, bars and counters completely without template building form-glued - with C-S SINUS bars, bar desks, ceiling panels partitions, doorway arches etc. can be manufactured without templates in layer glue procedure. C-S SINUS is suitable for arches with a radius starting from 250 mm up to straight elements for vacuum-layer glue procedure without template inclusive: - 20 piece C-S SINUS arch stands solid arch stand for screwing on to workshop ground, inclusive holding device for the inserted workpiece - C-S SINUS Vacuum bag (effective surface 4000 x 600 mm) original price ca. 5.500,-- located in 97447 Gerolzhofen sale in current condition - free on truck -

Condition: used, machine/vehicle number: 005608, Position 1: Roller Conveyors STEFANI + MAHROS-EVOLUTION SB ONE Position 2: Single Edgebanders STEFANI + MAHROS-EVOLUTION SB ONE Fpsdpfjiii Izex Afuon Position 3: Roller Conveyors STEFANI + MAHROS-EVOLUTION SB ONE Position 4: Single Edgebanders STEFANI + MAHROS-EVOLUTION SB ONE Position 5: Roller Conveyors STEFANI + MAHROS-EVOLUTION SB ONE

Year of construction: 2021, condition: like new (used), For sale: ANEST IWATA brand professional spray gun washing machine, models IWK SOL-B and IWK SOL-C (Model SLB/SLC), in perfect working condition. This equipment is designed for automatic and manual cleaning of spray guns and small components, using thinner, water, or water-based detergents. It is the ideal solution for paint shops, automotive repair shops, metalworking shops, or any industry that requires quick, safe, and efficient cleaning of spraying equipment. It includes complete technical documentation and CE certification. Key technical specifications: - Brand: ANEST IWATA (ANEST IWATA Europe S.r.l.) - Model: IWK SOL-B / IWK SOL-C (Model SLB / SLC) - Function: Automatic/manual washing of spray guns and containers up to 5 L. Fpodpsz Rivxefx Afujn - Washing products: Thinner, clean water, or water-based detergents (pH 6.5 - 12). - Tank capacity: 25 liters per container (2 containers: clean and dirty). - Weight: 42 kg - Dimensions: 1100 mm (height) x 450 mm (width) x 660 mm (depth). - Maximum operating pressure: 10 bar. - Operating pressure: 6 - 10 bar (recommended: 8 bar). - Air consumption: 15.7 Nm³/h (at 8 bar). - Sound level: 77.7 dB (A) - Equivalent average level. - Certification: CE marking, CE declaration of conformity. - ATEX compliance: Group II, Category 2 G (Zone 1), suitable for potentially explosive atmospheres. - Applicable standards: Directive 98/37/EC (Machinery Safety), Directive 94/9/EC (ATEX), EN 12921-1/2/3, EN 13463-1, among others. Features and advantages: - Efficient washing system: Includes a pneumatic membrane pump for clean and dirty detergents, a programmable timer, and vapor extraction nozzles. - Integrated safety: Safety valve that locks the pump when the door is opened, preventing splashing. External grounding to prevent electrostatic charges. - Easy maintenance: Robust design in stainless steel and galvanized steel. Accessible air and detergent inlet filters. - Versatility: Compatible with suction-feed and gravity-feed guns, with cup mounted or detached. - Model IWK SOL-C: Includes an automatic final wash function activated by a control button. Condition and maintenance: - Condition: New (never used) - Maintenance: Preventive maintenance has been performed according to the manufacturer's instructions (filter cleaning, lubrication of the pneumatic system, pump inspection). Includes: Original documentation (User and Maintenance Manual, CE Declaration of Conformity).

Year of construction: 1998, condition: good (used), Vötsch VTR 7033/S Temperature Test Chamber Manufacturer: Vötsch Type: VTR 7033/S Fjdpfeuuin Rox Afuspn Article No.: 60885637 Temperature chamber Temperature range: -70°C to +180°C Supply voltage: 400V Rated current: 24A Rated power: 9.5 kW Refrigerant (refrigeration): R 404 A Refrigerant (low-temperature): R 23 Year of manufacture: 1998 Chamber: W x D x H 670 x 640 x 750 mm TK 09 You can find more new and used items in our shop! International shipping costs available upon request!

Year of construction: 2006, condition: used, We offer this used Unigraphica Unicut 740 and S-74-3 Unigraphica Unicut 740 cutting machine, manufactured in 2006. Type: S-74-3 Version: S-74-3 Number: 006 Year of manufacture: 2007 Fuse: 16 A Rated current: 5.0 A Power consumption: 3.0 kW Power supply: 3 x 400/230 V 50/60 Hz Formats: 7"-27" Format divisions: 1/6" and 1/8" Paper weight: 60-250 g/m2 Maximum paper width: 740 mm. GUK K72/4 KTL-F4 folding machine Year of manufacture: 1996. Equipment: 4 standard cassettes (pockets), 1 blanking cassette, 1 electric cassette for performing special folds, cassette stand. The machine is operational but incomplete. Missing the controller and optical sensor for triggering the electric cassette, missing the reciprocating knife section. Modified sheet feed control. Fpsdpey N Rcbjfx Afuen The machine can be switched on and tested. If you have any questions or require additional information, please send us a message.

Condition: good (used), Year of construction: 1999, Nema NCG 4390 S Temperature Shock Chamber -40°C to +180°C Manufacturer: Nema Type: NCG 4390 S Temperature Range: -40 °C to +180 °C Dew Point Range: +5 °C to +89 °C Supply Voltage: 400 V Rated Current: 32 A Rated Power: 15 kW Refrigerant: R 404 A Year of Manufacture: 1999 Weight: 2720 kg External Dimensions: W 3950 x D 1700 x H 2280 mm Internal Dimensions: W 3000 x D 1300 x H 1170 mm WLG STEAM-O-MAT Electrically-controlled automatic steam humidifier and generator for mineral- and odor-free steam Manufacturer: WLG STEAM-O-MAT Type: EDB 8 Heating Voltage: 400 V Power: 6 kW Steam Output: 8 kg/h Water-cooled Condenser Fsdpsuzgt Esfx Afujpn Manufacturer: Bitzer Water-cooled Supply Voltage: 400 V Rated Current: 13 A Rated Power: 4 kW Refrigerant: R 404 A Weight: 145 kg KK-08 You can find more items – new and used – in our shop! International shipping costs available upon request!

Condition: used, machine/vehicle number: 007234, Max. panel width: 900 mm Fpodewlpnnepfx Afuen Max. panel length: 1200 mm Length of conveyor: 8000 mm Introduction system: with grippers

Condition: used, Year of construction: 2016, x-axis 6.800 mm y-axis 4.000 mm z-axis 1.500 mm Control iTNC 530 HSCI Heidenhain distance between columns max. 5.090 mm distance spindle center to table 1.825 mm type 175149A-0007 turning speed range - main spindle max. 19.800 min/-1 power capacity - main spindel 20 kW tool taper HSK-A63 swivellable B: +115° / -115 ° rotatable C: +/- 200 ° type 178099-0005 turning speed range - main spindle max. 10.020 min/-1 power capacity - main spindel 20 kW tool taper HSK-A100 swivellable B: +115° / -115 ° rotatable C: +/- 200 ° table surface area 6.000 x 3.000 mm max. table load 50,0 t height over floor 100 mm number of T-slots 12 T-slot - width 28H12 mm T-slot - distance 250 mm number of toolpositions 62 (38+24) pos. number of toolpositions HSK A63: 37+1 pos. number of toolpositions HSK A100: 23+1 pos. max. tool diameter HSK A63: 52 mm max. tool length HSK A63: 250 mm max. tool weight HSK A63: - kg max. tool diameter HSK A100: 80 mm max. tool length HSK A100: 450 mm max. tool weight HSK A100: - kg rapid traverse ( X / Y / Z ) 40.000 mm/min rapid traverse B/C: 4.320 °/min feed speeds X/Y/Z: 30.000 mm/min Working speed B/C: 2.160 °/min Accelaration max. 3,2 m/s² x-axis 6.800 mm y-axis 4.000 mm z-axis 1.500 mm b-axis +115° / -115 ° c-axis +/- 200 ° total power requirement 180 kVA Fjdpfx Afjzf Nn Souepn dimensions of the machine ca. 12,5 x 15,0 x 7,0 m 5-Axis-High-Speed-Gantry-Big-Machining-Center DROOP & REIN - FOGS 40 60 C - Fork head