Used Mark Andy Xp 5000 / 7+1 Flexo for sale (90,234)

Condition: like new (used), Year of construction: 2025, operating hours: 2,025 h, functionality: fully functional, machine/vehicle number: 25-168-T-402; 25-068-F-100-P, overall weight: 200 kg, Equipment: documentation/manual, A Soco System packaging line is offered, consisting of an F-100-P bottom flap folding machine and a T-402-5-2-9 carton sealing machine. Minimum carton width: 320 mm, maximum carton width: 520 mm, maximum carton length: 900 mm, machine dimensions X/Y: approx. 750 mm/1150 mm. Soco T-402 5-8-7 carton sealing machine, carton length range: 200 mm-750 mm, carton width range: 120 mm-460 mm, carton height range: 95 mm-470 mm, sealing capacity: 18/min, maximum tape roll diameter: 385 mm, weight: approx. 200 kg. Includes safety guard and powered conveyor belt, 500 mm wide. The system is in new condition, was put into operation in January 2026, and has only operated for approximately 75 days in a single-shift operation. Documentation is available. An on-site inspection is possible. Lsdpszvp Uysfx Agtjhk

Condition: good (used), Year of construction: 2007, CNC Long Turning Lathe Manufacturer: Traub Machine Model: TNL 12 Control System: Traub Year of Manufacture: 2007 TECHNICAL DATA Headstock - Max. bar diameter (mm) 12.7 - Quality of round material (DIN 671) (mm) Ø Xh9 - Max. speed (rpm) 12,000 Max. turning length / headstock travel - with fixed guide bushing (mm) 130 - with rotating guide bushing (mm) 80 - with programmable guide bushing (mm) 80 C-axis resolution (degrees) 0.001 Rapid traverse Z1 (m/min) 30 Tool turret 1 - Slide travel X1 (mm) 35 - Slide travel Y1 (mm) 38 (-10 +28) - Rapid traverse X1 / Y1 (m/min) 15 - Chip-to-chip time (s) 0.3 Tool turret 2 - Slide travel X2 (mm) 35 - Slide travel Z2 (mm) 50 - Rapid traverse X2/Z2 (m/min) 15 - Chip-to-chip time (s) 0.3 Tool drive for tool turret 1 and 2 - Max. speed (rpm) 8,000 - Tools max. (number) 2xG - Clamping diameter for drilling tools (mm) 0.5-7 Counter spindle / front tool holder - Max. bar diameter (mm) 12.7 - Max. longitudinal travel 23, 24 / Xg (mm) 140 / 228 - Rapid traverse 23, 24 / X3 (m/min) 30 - Tool holders (number) 4 - Max. speed (rpm) 12,000 - C-axis resolution (GSP) (degrees) 0.001 Rear tool holder, driven / fixed - Z-axis travel with work spindle (mm) 80 - Tool holder diameter (mm) 20 - Tool holders (number) 3 Rear tool holder (X4 axis) - X4-axis travel (mm) 39 - Rapid traverse speed (m/min) 15 - Tool holder diameter (mm) 28 - Tool holders (number) 4 Tool drive for rear tool holder (with X4 axis) - Max. speed (rpm) 10,000 - Driven tools max. (number) 4 - Clamping diameter for drilling tools - Driven (mm) 0.5 - 7 - Non-driven (mm) 0.5 - 10 Coolant system - Pump pressure, single-stage (bar) 3 - Tank capacity (l) 180 - Delivery rate (l/min) 40 Lhodpfszr Uvhsx Agtjk EQUIPMENT FEATURES - Chip conveyor - Bar loader FMB Minimag 18 - High-pressure system - Fire extinguishing system Subject to change and errors in technical data and specifications.

Condition: excellent (used), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, variable screw compressor ALMIG COMBI XP 6-270D (5 to 13 bar) include Dryer with time controlled drain include 270 liter tank include controller Air Control Basic Year of construction: 2025 Operatin hours: 1 Technical specifications Type: Combi XP 6-270D Possible operating pressures of the system (continuously adjustable): 5 - 13 bar Delivery quantity at minimum / maximum speed, measured according to ISO 1217 Appendix C. at 5 bar (g): 0.19 to 0.89 m³/min at 6 bar (g): 0.19 to 0.86 m³/min at 7 bar (g) : 0.19 to 0.82 m³/min at 8 bar (g) : 0.18 to 0.78 m³/min at 9 bar (g) : 0.18 to 0.76 m³/min at 10 bar (g) : 0.18 to 0.69 m³/min at 11 bar (g) : 0.18 to 0.67 m³/min at 12 bar (g) : 0.17 to 0.63 m³/min at 13 bar (g) : 0.17 to 0.59 m³/min Nominal power drive motor: 5.5 kW Degree of protection / insulation class drive motor: IP 23 Operating voltage / frequency: 400 V / 73-290 Hz Compressed air connection: 3/4“ G Length: 1530 mm Width: 640 mm Height: 1520 mm Weight: 470 kg Lodpex Uqxgofx Agtshk Visit our store. We always have a large selection of new and used compressors in stock! Available immediately.

Condition: ready for operation (used), Year of construction: 2010, operating hours: 9,000 h, functionality: fully functional, machine/vehicle number: 714000-1, type of input current: three-phase, input voltage: 400 V, table length: 7,000 mm, table width: 2,000 mm, power: 36.77 kW (49.99 HP), Flow Waterjet 714000-1 Flying Bridge 7x2 meters Year of manufacture: 2010 60,000 PSI Lodpoxwtu Tefx Agtjhk 9,000 hours Complete and in good working condition Various wear parts such as pipes and extra nozzles Abrasive hopper Abrasive feeder Immediately available Waterjet cutter Flow Waterjet Flowcut Waterjet cutting OMAX CNC plasma Hypertherm Laser fiber laser bystronic Amada Trumpf Accurl Bodor HSG JQ Nukon

Condition: used, turning diameter 3.200 mm turning diameter modified: 2.400 mm turning diameter over slide 3.000 mm turning length max. 15.000 mm control Sinumerik 840 D Siemens workpiece weight max. 80.000 kg work accuracy (up to) 0,01 mm turning speed range - main spindle max. 50 min/-1 weight of the machine ca. 154,4 t dimensions of the machine ca. 20,7 x 6,0 m Heavy Duty Lathe ZERBST - DXP 5 / W15x15000 - measurement precision: < 0,01 mm Ledpfx Ajwtrz Hegtehk Retrofit 2009 / 2012: - 2009: Control system upgrade to Sinumerik 840D - 2012: - New main gearbox, incl. main spindle drive - Installation of holding brake, incl. electrical integration - Modification and optimization of cylindrical roller bearings/bearings - Modernization: Control and safety technology

Condition: new, Year of construction: 2025, operating hours: 1 h, Screw compressor ALMIG BELT XP 8 - 10 bar (air cooled) include dryer include time drain include 2 filters include 270 liter tank galvanized Year 2025 / IMMEDIATELY AVAILABLE! Technical specifications Type: BELT XP 8 270 RD Operating pressure: 10 bar (ue) Delivery quantity, according to ISO 1217 Annex C: 1.00 m³ / min Degree of protection / insulation class drive motor: IP 55 / ISO F Rated power drive motor: 7,5 kW Operating voltage / frequency: 400/50 V / Hz Sound pressure level (DIN 45635 T.13): 63 dB (A) Length: 1320 mm Width: 695 mm Height: 1898 mm Lhedjx Rb D Sjpfx Agtsk Weight: 447 kg Compressed air connection: G 3/4 "

Condition: excellent (used), Weishaupt G30 gas burner 5000kw 2017 model Lhsdowiqliepfx Agtok

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Lodpjuxfu Nofx Agtohk Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: not inspected (used), Year of construction: 1991, Power connection 400V / 11kW Dust extraction connection Ø 1x100 mm Compressed air connection 6 bar Weight approx. 980 kg Width min/max 760 / 1605 mm, length 4425 mm, height 1720 mm Workpiece thickness min. 6 mm, max. 45 mm Workpiece length min. 180 mm Workpiece width min. 60 mm Feed rate 13 m/min Edge thickness max. 5 mm, strip material 3 mm Edge magazine 1301 with DAZ 11 Gluing station 1906 Pressure unit 1914 Lhjdsiw D Udopfx Agtek Cutting unit 1976 Flush trimming unit 1942 Radius R2 trimming unit 1943 Scraper blade 1927 Smoothing unit 1944

Condition: used, Year of construction: 2006, Stamping Press Manufacturer: Schuler Pressen GmbH & Co. KG, Göppingen, Germany Type: SAL 250-1.9 Mark II Serial number: A/260156 (Machine No. 2006-260156) Year of manufacture: 2006 Press force: 2,500 kN (250 tons) Stroke rate: 80–400 strokes/min Drive power: 51 kW at 2,000 rpm Ram stroke: 30 mm Ram adjustment: 100 mm Ram lift: 75 mm Installation height (table plate to ram, ram stroke bottom, ram adjustment top): 550 mm Lhodpfx Aszil S Iegtok Table dimensions: 1,950 x 1,060 mm (as per drawing) Ram face: 1,950 x 800 mm (as per drawing) Compressed air: 5.5 bar Total weight (excl. feed): 48,000 kg Control system: SYS PACO 8000 Sound-insulating enclosure (orange) Strip Feed Unit Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Type: KRS 18.260/19-2000.2H-BF1 Serial number: 40 871 Year of manufacture: 2006 Connected load: 15.5 kW Supply voltage: 400 V, 50 Hz Decoiler Manufacturer: Kohler Maschinenbau GmbH, Friesenheim, Germany Model: 18 260-1000.2 Serial number: 40 466 Year of manufacture: 1984 Connected load: 8 kW Supply voltage: 380 V, 50 Hz

Year of construction: 2015, condition: like new (used), I sell the screw compressor: MARK MSB 30/10 Motor - 30kW, Power - 3540 l/min., 212 m3/hr. Lodpfx Agsiu Icvotehk Pressed air max.10 bar Year 2015. All working, like new.

Condition: excellent (used), fuel type: diesel, color: other, first registration: 06/1999, Year of construction: 1999, operating hours: 5,001 h, Dutch Manitou MT 1337 SLT Turbo, with only 5,000 hours and pallet forks = More information = CE mark: yes Technical condition: very good Visual appearance: very good Registration number: TNR-76-N = Dealer information = We do not charge delivery costs. All trade-ins and financing are possible. Lsdpfx Agozuc Spetshk Although we take great care in preparing our advertisements, it is possible that some of the options described may or may not be present on the car. Please check before purchasing that all the options described that are important to you are actually present. We are RDW certified. You can opt for an extended warranty; see our website for the packages. All our cars have a clear maintenance history and mileage registration. Our opening hours are: Monday to Friday from 9:00 a.m. to 5:00 p.m. and evenings by appointment. Saturday from 9:00 a.m. to 3:00 p.m. You can find us at: Middelingenseweg 22 5321 JH Hedel The Netherlands And reach us at: Trucks: Passenger cars: Website: Email:

Condition: excellent (used), Year of construction: 2015, operating hours: 1,884 h, PROD. BRAND TYPE MSA 15 500AD2000 S/N CAI857781 YEAR 2015 POWER (kW) 15 Ljdpoyi A Arsfx Agtehk CAPACITY (m3/min) 1.79 PRESSURE (bar) 10 HOURS (LOAD/TOTAL) 1884/8665 FREQUENCY INVERTER no BUILT-IN DRYER yes HEAT EXCHANGER no COOLING (AIR/WATER) air ON TANK yes, 500 l DOCUMENTATION yes NEW/USED USED

Condition: used, Year of construction: 1988, turning diameter over bed 2000 mm turning diameter over slide rest / mm turning length / mm - Type 1 K 671 320 F3 - Year of manufacture 1988 (first commissioned in 1998) - Turning length 10,000 mm Ledpfxoxn Tz Ie Agtohk - Turning diameter over bed 2,000 mm (modified) - Faceplate diameter 1,950 mm - Faceplate clamping range 400 - 1,350 mm - Speeds 1.00 - 140 rpm - Torque 125,000 Nm - Main cutting force 130 kN max. - Automatic swiveling tailstock - Max. workpiece weight 70 tonnes - Max. workpiece weight with steady rest 100 tonnes - Drive power 100 kW - Number of bed ways 4 - Dimensions 22,000 x 6,200 x 2,900 mm - CNC control SIEMENS 840D (2010 for €220,000.00) - Support feed X-Z 0.3 - 4,000 mm/min. - Support rapid traverse X-Z 4,000 mm/min. - Inner cone dimensions 140 x 1:7 - The machine complies with CE guidelines - Includes 2 steady rests, 1 roller block, 4 jaws, boring device - Condition: very good condition

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 300 kg, volume flow: 60 m³/h, pressure (max.): 10 bar, tank capacity: 500 l, Equipment: documentation/manual, refrigerant dryer, type plate available, PROD. MARK TYPE MSM7.5D TM500 S/N ITJ874643 YEAR 2024 CAPACITY (kW) 7.5 OUTPUT (m3/min) 1 m3/min CIS (bar) 10 BUILT-IN DEHUMIDIFIER YES ON 500L TANK DOCUMENTS YES Lodjvrcucopfx Agtohk NEW/USED NEW

Condition: good (used), Heating fan, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 2-stage 157000573036 -Power: 53.5/64.9 kW -Fan: Ziehl-Abegg -Operating pressure: max 16 bar Quantity: 1 piece available -Dimensions: 800/390/H880 mm -Weight: 49 kg Lsdpfx Agou N Sibstjhk

Year of construction: 1999, condition: ready for operation (used), Max. bar length: 1400mm, bar diameter: 6.35-80mm, weight: 450kg, accessories: cabling, servo amp, bar pusher 52D=12, bar pusher 52D=15, bar pusher 52D=21, with delivery note, copy of the invoice, various manuals, operating and maintenance instructions. An on-site inspection is possible. Lhodpfszrn Htjx Agtok

Condition: used, Year of construction: 2005, machine/vehicle number: 25748, Equipped with: Central Lubrication Machine Flushing Coolant Filtering Equipment 480V, 60 Hz Electrics Headstock W/Center Tailstock W/Center Auto Loading Hydraulic System Pneumatic System Central Lubrication Coolant Filtering Equipment Specifications: Working Range of the Machine: -Centering Width: 600 - 1250 mm -Maximum Workpiece Diameter: 320 mm -Oscillation Stroke: +/-1 mm in relation to the oscillation frequency -Oscillation Frequency: 0-200 double strokes/min infinitely adjustable -Spindle Rotation Speed: 0-150 min -1 infinitely adjustable Lhodezn Az Dspfx Agtek -Loading Height Above Floor: 1,050 mm Horizontal Axis Machine Column Travel: 1650 mm Headstock - Rotation: -Workpiece Rotational Speed: n2= 0-200 min-1 limited to n2=0-150 min -1 Headstock - Oscillation: -Oscillation Frequency: n2 = 800 double strokes/min -Oscillation Amplitude: =/- 1 mm Tailstock - Hydraulic Axis: -Stroke: 250 mm -Analog Transducer: Measuring length 300 mm Machine Weight: Approximate 8 Tons Approximate Space Requirements (Width x depth x height): -Machine: 3,6 x 3,3 x 3,3 meters -Switch Cabinet: 2,4 x 0,6 x 2,1 meters -Hydraulic Aggregate: 0,9 x 1,3 x 1,9 meters -Coolant Filtering Equipment: 1,3 x 1,0 x 2,0 meters Approximate Total Space Requirements: 35,5 meters

Year of construction: 2014, condition: good (used), High-performance fan, Zenner, type VTZ 710/63/1 Special, year of manufacture 2014, consisting of a control cabinet, frequency converter, and cell gate. Technical data Manufacturer: Zenner Ventilatoren Type: VTZ 710/63/1 Special Year of manufacture: 2014 Volume: 4.72 m³/s Maximum temperature: 80°C Density: 1.2 kg/m³ Total pressure: 5,000 Pa Speed: 2900 1/min Motor: 55 kW Lsdpfx Aszt Imcjgtehk Voltage: 400/690 V / 50 Hz Weight: approx. 800 kg The fan is designed for the transport of paper/cardboard, during which the material is also shredded. The machine is in good condition. It has been inspected and tested by us in 28816 Stuhr. You can find the video on our website or our YouTube channel. Inspections, including with the machine running, are possible at any time by arrangement. Video calls are possible upon request. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, prior sale, and may be revoked at any time. Inspections are possible by arrangement. The sale takes place from our location, without any warranty.

Condition: used, mileage: 263,069 km, power: 154 kW (209.38 HP), gearing type: mechanical, fuel type: diesel, color: orange, overall weight: 16,000 kg, empty load weight: 9,840 kg, number of seats: 3, first registration: 06/2002, Year of construction: 2002, operating hours: 10,533 h, Equipment: additional headlights, cabin, hydraulics, Road marking machine: + Hofmann + H75-1000 + Thermoplastic + Electric heater (400V) + Thermoplastic tank with gas heater and hydraulic agitator Lhedpfx Agoxal A Uetjk + Paint and bead spray left / right + Line segment computer + Rear and front warning system + CompAir DLT 0404 compressor with Deutz diesel engine (9,513 operating hours) + Kubota Diesel V1505 drive engine (22,975 operating hours) + Renault Midlum 210 chassis + First registered: 10.06.2002 + 263,069 km; 10,533 operating hours + 3-seater + Manual transmission with reduction gear + Hand throttle Unladen weight: 9,840 kg; permissible total weight: 16,000 kg + 813 cm x 250 cm x 325 cm (LxWxH) Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and omissions excepted, subject to prior sale!

Condition: good (used), Year of construction: 2021, S015464 MANUFACTURER: MARK MODEL: MSM 15 SERIAL NO.: ITJ514259 YEAR: 2021 POWER (kW): 15 CAPACITY (m³/min): 1.68 PRESSURE (bar): 10 OPERATING HOURS (LOAD/TOTAL): 948/1868 FREQUENCY INVERTER: no Lsdpfxoyh Rx No Agtohk BUILT-IN DRYER: no

Year of construction: 2007, condition: ready for operation (used), A heavy-duty pre-screening unit ABR for the mining industry for separating aggregates is available. Inclination: 15°, screen area X/Y: 5000mm/2000mm, number of decks: 1, screen area: 10m², machine dimensions X/Y/Z: approx. 5500mm/2400mm/1500mm, weight: approx. 10000kg. Without a screen. An on-site inspection is possible. Lodpjy R Dtpjfx Agtshk

Condition: good (used), Height: max 1,800 mm Pallet format: max 1,000 x 1,200 mm Speed: max 30 pallets/h Electrical system: 380 VAC Electrical system: 50 Hz Lsdpfx Agoqqkx Notohk Electrics: 3 PH Clamping force: max 5,500 N Equipment - Strapping machine: XP-112 MV - Sealing head CFH-1 - Stretch wrapper: GL-215 - Control system: S7

Condition: excellent (used), Year of construction: 2013, volume flow: 2 m³/h, pressure (min.): 8 bar, MARK MSA 15 screw compressor 15 kW motor Capacity: 2.00 m3/min Pressure: 8 bar Year of manufacture: 2013 Net price: 8,500,- Lhjdpfjy Uwi Eox Agtsk Gross price: 10,455,- Compressor is in fully working condition.

Condition: good (used), Year of construction: 2006, Screw compressor MARK Type: MAS 7,5KW Year 2006 Power 7,5KW Pressure : 10 Bar Lhjdpfx Aotx Aknogtsk Dimensions: L100cm X W 62 cm X H 105 cm Weight: 215 KG Ready to use condition.