Used Mawera Rmo 400 for sale (18,509)

Condition: used, This listing is for a Thermo Fisher Scientific Labofuge 400R refrigerated Centrifuge. The unit is in full working condition and is ready for immidate realese. The Thermo Fisher Scientific Labofuge 400R is an air-cooled, quiet operating centrifuge, with temperature control for sensitive samples. This versatile refrigerated centrifuge has a temperature range between 0-40°C to help ensure low temperatures even during an extended run or when running at high speeds. The microprocessor control then monitors temperatures to prevent sample freezing. The wide range of compatible rotors, available from Thermo, allows users to fit most tubes. Easy Controls: The microprocessor control panel is set up front for easy access, with individual indicators showing temperature, speed, and RCF settings, as well as run time. Users can set their desired parameters quickly through the touchpad controls, choose a quick run for short spins, and engage a soft start/soft break for gentle processing of more sensitive samples. Spins are powered by an induction drive that’s maintenance-free for worry-free operation. Ppjdsxx Awgjpfx Ag Dor Safety Features: The automatic imbalance detector will cut out the drive if the rotor is out of balance to protect components and your work. There is also rotor over speed protection to help reduce wear on components. The steel jacket system and durable construction help the system to comply with IEC 1010. The Labofuge 400R uses a highly effective cooling environmentally friendly technology, using standstill cooling, and R134A refrigerant.

Condition: ready for operation (used), Danaher Motion KT4030-10 high-frequency converter SN: K4030-24003-2 – IN 3 x 230-480V / 32 A / 50-60Hz, used, in good condition, 100% fully functional, delivery scope as shown in the photos. Podpfx Aex Eq Ezjg Dopr

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 2,5 EW20° 3GG Cubitron from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Psdpouayy Tsfx Ag Djpr Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: new, max. width of grinding wheel 145 mm Ppodsuayy Hepfx Ag Dor diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 1,5 EW20° 3GG from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M 2,25 EW20° 3GG from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Pedpouayyyofx Ag Dspr Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: new, max. width of grinding wheel 145 mm diameter / bore of grinding wheel 300 mm Flange taper Reishauer 0 grinding wheel size 300x145x160 mm Beam flange (machine type Reishauer RZ 400/800/1000) + including grinding disc T1SP 300x145x160 M1 EW20° 2GG from the company 3M Ceramic grinding discs for tooth flank grinding - 145 mm wide Dimensions according to machine type Reishauer Profiling according to specification module m, running speed gg, pressure angle EW Advantages: - Grinding burn risk is close to zero - Up to 50% shorter sanding times Podpfxsuayymo Ag Depr - 2-fold reduction in dressing effort - Twice the service life of grinding discs - Continuous, consistent sanding performance - Significantly higher sanding parameters than with standard tools

Condition: used, We are offering used shelving units for sale. TECHNICAL DATA Manufacturer: FX Rauscher Model: P30 Condition: used Frame height: approx. 2,500 mm Shelf dimensions: 1,220 x 400 x 33 mm Shelf load capacity: 100 kg Ppsdpey Hqt Iefx Ag Der Number of levels: 6 Boltless assembly Usage: single-sided Material: galvanized steel PRICE €1,216.25 net (5 starter bays + 20 add-on bays) €1,447.34 gross incl. VAT Tiered pricing Starter bays: 1 - 5 units: €70.00 net 6 - 20 units: €66.63 net 21 - 50 units: €63.25 net from 51 units: €59.88 net Add-on bays: 1 - 5 units: €50.00 net 6 - 20 units: €47.50 net 21 - 50 units: €45.00 net from 51 units: €42.50 net Large quantities available directly from stock. YOUR CONTACT PERSONS AT OUR COMPANY: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is available at an additional charge, depending on the destination and the size of the shipment. Please contact us for a customized quote. PROJECT PLANNING Our sales team will be happy to prepare a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly of the goods. PAYMENT TERMS Payment terms will be agreed upon in case of an order. The price is the unit/net price unless otherwise stated in the description (plus VAT). Of course, you will receive an invoice showing VAT separately. ABOUT US DLK, based in Nordhorn, deals in new and used products in the fields of warehouse logistics, conveyor technology, mezzanines, textile storage systems, as well as machinery for commerce, industry, and trades. We continuously offer attractive second-hand equipment from various manufacturers and brands at competitive conditions. If you have any questions, please feel free to contact us. ‘Four wins’—the four success factors from DLK: Storage Technology | Levelmaker® | Logistics | Solutions

Condition: used, We offer used shelving racks here. TECHNICAL DATA Manufacturer: FX Rauscher Type: P30 Condition: used Frame height: approx. 2,500 mm Shelf size: 1,220 x 400 x 33 mm Compartment load capacity: 100 kg Number of levels: 6 pcs Boltless assembly Use: single-sided Material: galvanized steel PRICE €85.20 net (1 starter bay) Ppsdpfxey Hqtno Ag Der €101.39 gross, incl. VAT Quantity discounts Starter bays: 1 - 5 units: €70.00 net each 6 - 20 units: €66.63 net each 21 - 50 units: €63.25 net each from 51 units: €59.88 net each Add-on bays: 1 - 5 units: €50.00 net each 6 - 20 units: €47.50 net each 21 - 50 units: €45.00 net each from 51 units: €42.50 net each Large quantities available directly from stock. YOUR DIRECT CONTACTS AT OUR COMPANY: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly. This item is available for collection. Delivery or shipping can be arranged at an additional charge. The extra costs depend on the delivery location and order volume and can be quoted individually on request. PROJECT PLANNING Our sales team will gladly prepare a non-binding, tailored quotation according to your specifications. PAYMENT TERMS Payment terms are to be agreed upon at the time of order. The price is per unit/net price as described above (plus VAT). You will, of course, receive an invoice with VAT shown. ABOUT US The company DLK in Nordhorn trades in new and used products from the areas of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machines for trade, industry, and craft sectors. We continuously offer interesting used equipment from various manufacturers/brands at attractive conditions. Please do not hesitate to contact us with your questions. Vier gewinnt – The Four Success Building Blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: used, We are offering used shelving systems for sale here. TECHNICAL DATA Manufacturer: FX Rauscher Type: P30 Condition: Used Frame height: approx. 2,500 mm Shelf dimensions: 1,220 x 400 x 33 mm Shelf load capacity: 100 kg Number of levels: 6 pcs Boltless assembly Usage: single-sided Material: Galvanized steel PRICE €270.00 net (1 starter bay + 4 add-on bays) €321.30 gross incl. VAT Ppjdpfx Ajy Hqr Rsg Der Tiered pricing Starter bays: 1 - 5 pcs: €70.00 net each 6 - 20 pcs: €66.63 net each 21 - 50 pcs: €63.25 net each from 51 pcs: €59.88 net each Add-on bays: 1 - 5 pcs: €50.00 net each 6 - 20 pcs: €47.50 net each 21 - 50 pcs: €45.00 net each from 51 pcs: €42.50 net each Large quantities available ex-stock. YOUR CONTACT PERSONS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly. This item is available for collection. Delivery or shipping is available at an additional charge. Additional costs depend on the delivery location and shipment size and can be provided upon request. PROJECT PLANNING Our sales team will gladly prepare a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with transport and assembly. PAYMENT TERMS Payment terms are to be agreed upon order placement. Prices are quoted per item/net price or as specified in the description (plus VAT). You will, of course, receive an invoice showing VAT. ABOUT US DLK, based in Nordhorn, deals in new and used products for warehouse logistics, conveyor technology, mezzanine platforms, textile storage, as well as machinery for trade, industry, and crafts. We regularly offer attractive used equipment from various manufacturers/brands at competitive terms. If you have any questions, please feel free to contact us. Four wins – The success modules of DLK – Warehouse technology | Levelmaker® | Logistics | Solutions

Condition: used, We are offering used shelving units here. TECHNICAL DATA Manufacturer: FX Rauscher Type: P30 Condition: Used Frame height: approx. 2,500 mm Shelf dimensions: 1,220 x 400 x 33 mm Shelf load capacity: 100 kg Number of levels: 6 pcs Boltless assembly Use: single-sided Material: galvanized steel PRICE €506.50 net (2 starter bays + 8 extension bays) €602.74 gross incl. VAT Tiered Pricing Starter bays: 1 - 5 pcs: €70.00 net y6 - 20 pcs: €66.63 net Pedoy Hqrkepfx Ag Dspr 21 - 50 pcs: €63.25 net from 51 pcs: €59.88 net Extension bays: 1 - 5 pcs: €50.00 net 6 - 20 pcs: €47.50 net 21 - 50 pcs: €45.00 net from 51 pcs: €42.50 net Large quantities are available directly from stock. YOUR CONTACT PARTNERS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION We can assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is available at an extra charge. Additional costs vary depending on delivery location and order volume and can be individually quoted upon request. PROJECT PLANNING Our sales team will gladly provide you with a non-binding, tailor-made offer according to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the goods. PAYMENT TERMS Payment terms are to be agreed upon in the case of an order. The indicated price is per unit/net price or as stated in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK in Nordhorn trades in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machines for commerce, industry, and trade. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please feel free to contact us. Four wins – The success building blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: used, empty load weight: 1 kg, maximum load weight: 38,999 kg, overall weight: 39,000 kg, axle configuration: > 3 axles, first registration: 12/2022, loading space length: 13,340 mm, loading space width: 2,500 mm, loading space height: 2,650 mm, loading space volume: 88 m³, total length: 13,340 mm, suspension: air, tire size: 385/65 22,5, tire condition: 50 %, color: white, Year of construction: 2022, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference number for inquiries: 405141 Koegel, refrigerated deep-freeze trailer * Year of manufacture: 2022 * ABS, Anti-lock Braking System * EBS, Electronic Braking System * Air suspension * Lift axle * Fixed roof Pjdpfx Asy E E Evsg Djpr * Load securing certificate DIN EN 12642 Code XL * Cargo securing rail * Portal doors * Complete double-deck system incl. support beams * Pallet box * Air connection coupling head (red + yellow) * Connection plug 2x 7-pin * Connection plug 15-pin * Storage/toolbox * Document box * Deep-freeze capability * Aluminum floor * Floral width * Cooling unit: Thermoking * Diesel + electric operation * Suspension: Air * Gross vehicle weight: 39,000 kg * Unladen weight: 1 kg * Payload: 38,999 kg * Permissible total weight: 39,000 kg * Tire condition, 1st axle: 40% -- 20% - Tire size: 385/65 R22.5 * Tire condition, 2nd axle: 80% -- 80% - Tire size: 385/65 R22.5 * Tire condition, 3rd axle: 50% -- 50% - Tire size: 385/65 R22.5 * Tire sizes: 385/65 R22.5 * Internal dimensions: L = 13,340 mm, W = 2,500 mm, H = 2,650 mm * Internal volume*: 88 m³ * Pallet slots: 33 * Refrigeration unit: Thermoking A 400 * Operating hours: Diesel = 3,744, Electric = 3,440 * Refrigeration unit tested for functionality Disclaimer: Subject to change, prior sale, and errors. More pictures and videos available on our homepage. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles * Fast, straightforward financing * Procurement of all (export) documents * Arrangement of export / customs license plates * Vehicle reconditioning: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained professional staff, we are happy to provide advice.

Condition: good (used), Year of construction: 2015, type of input current: AC, input voltage: 400 V, Equipment: documentation/manual, Cheops Tray shrink packer Made By CHEOPS spol. s r.o. TERMOPAK 400TP – upto 400 Trays per hour Ability to pack tray+ film, Film only or pad+film For use with pop-lock or pre made trays – existing cardboard supplier details can be provided, along with existing cutters. Lifters and frames for the following formats : Psdpfsx Dantsx Ag Djpr 200ml bottles – 24 pack 250ml bottles – 24 pack 330ml bottles – 12/24 pack 500ml 1914 style tall bottles – 12 pack 750ml bottles – 12 pack Lifting heads for: 500ml stumpy bottles – 8/12 pack In use till end of January 2026 We used on glass but with different heads could pack PET / Cans. Selling as increased production capacity.

Condition: used, total length: 1,220 mm, total width: 400 mm, total height: 2,000 mm, load capacity per storage section: 150 kg, We are offering used shelving racks here. TECHNICAL DATA Manufacturer: Nedocn Model: Shelf N Frame height: 2,000 mm (new) Shelf dimensions: 1,220 x 400 mm (used) Load capacity per level: 150 kg Number of shelf levels: 5 pieces Boltless assembly Diagonal bracing Tiered net prices per unit plus VAT: Starter Bays: 1 - 5 units: €69.50 net each 6 - 20 units: €66.03 net each 21 - 50 units: €62.55 net each from 51 units: €59.08 net each Add-on Bays: 1 - 5 units: €47.50 net each 6 - 20 units: €45.13 net each 21 - 50 units: €42.75 net each from 51 units: €40.38 net each PLANNING Our sales team will be happy to provide you with a non-binding quotation tailored to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the equipment. PAYMENT TERMS Payment terms are to be agreed upon at the time of order. All prices are per unit/net prices or as specified in the description (plus VAT). You will, of course, receive an invoice showing VAT separately. Ppedpfx Ajy Dggljg Dor ABOUT US DLK, based in Nordhorn, trades in new and used products in the areas of warehouse logistics, conveyor technology, mezzanine floors, textile storage systems as well as machinery for commerce, industry, and skilled trades. We continuously offer attractive deals on used equipment from various manufacturers at competitive conditions. Please do not hesitate to contact us if you have any questions. Four wins – The four success factors of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions.

Condition: like new (used), total length: 1,220 mm, total width: 400 mm, total height: 2,200 mm, load capacity per storage section: 150 kg, We offer used boltless shelving racks here. TECHNICAL DATA Manufacturer: Nedocn Type: Shelf N Frame height: 2,000 mm (new) Shelf size: 1,220 x 400 mm (used) Shelf load capacity: 150 kg Number of levels: 6 Boltless assembly Diagonal bracing Tiered pricing net per unit plus VAT. Starter bays: 1 - 5 bays: €79.20 net per unit 6 - 20 bays: €75.24 net per unit 21 - 50 bays: €71.28 net per unit Ppsdpsy Dgf Iefx Ag Der from 51 bays: €67.32 net per unit Extension bays: 1 - 5 bays: €55.00 net per unit 6 - 20 bays: €52.25 net per unit 21 - 50 bays: €49.50 net per unit from 51 bays: €46.75 net per unit PROJECT PLANNING Our sales team will be happy to provide you with a non-binding offer tailored to your requirements. TRANSPORT & ASSEMBLY We are happy to assist you with transport and installation of the goods. TERMS OF PAYMENT Terms of payment are to be agreed upon in the event of an order. The indicated price is per unit/net price as specified in the description (plus VAT). You will of course receive an invoice with VAT separately indicated. ABOUT US DLK, located in Nordhorn, specializes in new and used products in the fields of warehouse logistics, conveyor technology, mezzanine systems, textile storage as well as machinery for trade, industry, and crafts. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please feel free to contact us. Connect Four – The Four Success Modules of DLK – Storage Technology | Levelmaker® | Logistics | Solutions

Condition: used, mileage: 199,800 km, power: 95 kW (129.16 HP), first registration: 10/2019, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 7,250 mm, total width: 2,200 mm, total height: 3,230 mm, loading space length: 4,480 mm, loading space width: 2,130 mm, loading space height: 2,190 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, No. 36 – You can find this and many other inspected Mercedes-Benz vans on our website: ----Mercedes-Benz Sprinter 316 CDI MAXI, refrigerated box with Thermo King V300 Max refrigeration unit, suitable for fresh goods transport down to 0°C. Both on-the-road and stationary cooling (400 Volt power connection) are available. The vehicle comes from one previous owner and has a complete Mercedes-Benz service history. Vehicle inspection (HU / AU, TÜV) valid until 11/2027.----All services were performed exclusively at Mercedes-Benz at 53 km, 94, 137, and 190 km.---- - Permissible total weight: 3,500 kg - Unladen weight: 3 kg - Payload: 500 kg - Cargo area (LxWxH in cm): 448 x 213 x 219 - Emissions standard: EURO 6 - Long wheelbase: 4325 mm - VIN: WDB9071351N061499 - All-season tires - 2 keys ----* Mercedes-Benz Sprinter 316 CDI MAXI * Fresh goods refrigerated box * Thermo King V300 Max cooling unit * Road and stationary cooling * Air conditioning * Heated windshield * Reinforced front axle Psdjy Ebdhepfx Ag Dopr * MBUX * Navigation system * Electric windows * Electrically adjustable exterior mirrors * Airbag * Central locking ----Errors, changes, and prior sale reserved. Special equipment: - Second battery (auxiliary battery) in cabin - Extended exterior mirror mounts left/right - Chassis: Stabilization level II - Electrical connection terminal (driver's seat base) - Fuel filter with water separator - Front engine power take-off with carrier for additional refrigerant compressor - MBUX multimedia system (7" touchscreen) - Navigation system for MBUX multimedia system - Smoker's package - Tire pressure monitoring system - Spare wheel in driving condition - Spare wheel mount under end of frame incl. jack - Front mud flaps - Driver’s cab seats: Comfort driver seat - Engine start/stop system - 230V socket in driver’s cab - Cut-off relay for additional battery - Fleece battery 92 Ah - Reinforced front axle - Jack - Heat-insulating glazing (windshield with upper band filter) Additional features: - Overhead storage compartment above windshield - Storage compartment under dashboard, passenger side - Rear tow hook - Adaptive brake lights - Driver’s airbag - Traction control system (ASR) - Washer fluid level indicator - Electrically adjustable and heated exterior mirrors, both sides - Outside temperature display - Brake assist - Driver’s cab roof lining - Automatic headlight activation - Electronic brake-force distribution (EBV) - Driver assistance system: Crosswind Assist - Body/Construction: Standard platform - Keyless Start - Communication module (LTE) for digital services - Main fuel tank: 71 liters - Steering wheel (mechanically adjustable steering column) - Headlight range control - Truck registration - Side marker lights - Mercedes-Benz emergency call system - Engine 2.1L – 120 kW CDI CAT - Wheelbase 4325 mm - Low emissions per Euro 6 standard - Seat belt system with warning device (driver’s side) - Upholstery/seats: Fabric - Driver’s cab seats: Adjustable passenger seat - Maintenance interval display Assyst - Permissible total weight: 3.5 t

Condition: used, mileage: 199,800 km, power: 95 kW (129.16 HP), first registration: 10/2019, fuel type: diesel, overall weight: 3,500 kg, next inspection (TÜV): 11/2027, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 7,250 mm, total width: 2,200 mm, total height: 3,230 mm, loading space length: 4,480 mm, loading space width: 2,130 mm, loading space height: 2,190 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, No. 36 – You will find this and many more inspected Mercedes Benz commercial vehicles on our homepage: ---- Mercedes-Benz Sprinter 316 CDI MAXI, refrigerated box body equipped with the Thermo King V300 Max refrigeration unit, suitable for fresh goods service down to 0°C. Both in-transit and stationary cooling (400 Volt power connection) are available. The vehicle is single-owner and has a full, uninterrupted Mercedes-Benz service history. TÜV/roadworthiness valid until 11/2027. ----All maintenance services were carried out exclusively by Mercedes-Benz at 53, 94, 137, and 190 km. ---- Permissible total weight: 3,500 kg Unladen weight: 3,000 kg Payload: 500 kg Cargo area (LxWxH in cm): 448 x 213 x 219 Emissions class: EURO 6 Long wheelbase: 4,325 mm VIN: WDB9071351N061499 All-season tires 2 keys Equipment highlights: * Mercedes-Benz Sprinter 316 CDI MAXI * Fresh service refrigerated box * Thermo King V300 Max refrigeration unit * In-transit and stationary cooling * Air conditioning * Heated windscreen * Reinforced front axle * MBUX multimedia system * Navigation system * Power windows * Electrically adjustable exterior mirrors * Airbag * Central locking --- Subject to errors, changes, and prior sale. --- Pedpfx Aey Ebdnjg Dspr Special equipment: 2nd battery (auxiliary), extended exterior mirror arms left/right, suspension: Stabilization Level II, terminal strip for electrical connections (under driver seat), fuel filter with water separator, engine PTO front with bracket for additional refrigerant compressor, MBUX multimedia system (7" touchscreen), navigation system for MBUX multimedia system, smoker package, tire pressure monitoring system, spare wheel in drive configuration, spare wheel carrier under chassis end incl. jack, front mud flaps, comfort driver's seat, start/stop system, 230V socket in cab, separating relay for additional battery, fleece battery 92 Ah, reinforced front axle, jack, heat-insulated glass (windscreen with upper strip filter). Additional equipment: Overhead storage above windscreen, compartment below dashboard on passenger side, rear tow hook, adaptive brake light, driver's airbag, traction control (ASR), washer fluid level indicator, electrically adjustable and heated exterior mirrors (both sides), outside temperature display, brake assist, cab roof lining, automatic driving light activation, electronic brake force distribution (EBV), side wind assist, body/configuration: standard platform, keyless start, communication module (LTE) for digital services, main fuel tank 71 L, mechanically adjustable steering column, headlight leveling control, truck registration, side marker lights, Mercedes-Benz emergency call system, engine: 2.1 L – 120 kW CDI with catalytic converter, wheelbase 4,325 mm, low-emission according to Euro 6, seat belt system with warning on driver’s side, fabric seat trim/upholstery, adjustable passenger seat in cab, service interval indicator ASSYST, permissible gross weight 3.5 t.

Condition: used, axle configuration: 2 axles, first registration: 12/2021, loading space length: 13,400 mm, loading space width: 2,490 mm, loading space height: 2,690 mm, Year of construction: 2021, Operating hours Diesel 4,460, mains 489, body strength certified according to DIN EN 12642 Code XL ("TÜV load securing certificate"). International customs closure for body with rear wall door, with customs lock approval. Customs sealability to be ensured by customer when external KG mounting is carried out. 1 E-bike rack in basket design for 2 E-bikes behind the aggregate, SKO COOL. 4 pairs of Ferrylashings according to DIN/ISO 9367 for SKO COOL, with support bracket. Model SKO 24/L - 13.4 FP COOL V7. Manufacturing date 07.12.2021. Body length 13,403 mm. Body width 2,490 mm. Body height 2,650 mm. Usable body length 13,315 mm. Usable body height 2,550 mm. Total height unladen 4,008 mm. Total height front unladen 4,021 mm. Total height rear unladen 4,005 mm. Loading height rear unladen 1,274 mm. Tire size 385/65R22.5. Total weight (permitted/technical) 36,000/39,000 kg. Axle load (permitted/technical) 24,000/27,000 kg. Fifth wheel load (permitted/technical) 12,000/15,000 kg. Unladen weight complete 7,965 kg. Saddle height unladen 1,150 mm. Reference length outside 13,550 mm. Body width 2,600 mm. Rear door height 2,640 mm. Rear door width 2,490 mm. ROTOS SCB running gear system (disc brake). Axle SCB 9 t, SP2040, FM1300, ET 120 disc brake 430 mm. Wheel mounting by centering according to DIN 74 361 part 3. Analog hubodometer, center right. Two-line compressed air brake system with standard couplings. EBS 2S/2M with stability program. EBS power supply via ISO 7638 + CAN. Double membrane spring-loaded cylinder. Lifting and lowering device with AUTO-RESET function. Rotary switch for box interior lighting. Holder arrangement for light and brake connection. Power supply for box interior lighting via parking light. 2 sockets 7-pin: 1xDIN ISO3731 / 1xDIN ISO1185 and 1 socket ISO12098. 2 separate reversing lights. LED surround lighting right and left, installed in area of support winch. Tire brands SCB "SELECTION" Continental/Goodyear/Dunlop/Hankook/Pirelli/Bridgestone. 6x 385/65R22.5 (11.75x22.5). Extendable folding ladder installed on the right side in driving direction, partially under corner bumper. Plastic toolbox with lid holder, tray, and drawer behind the pallet box for 36 Euro/24 ISO pallets. Pallet box ground clearance 291 mm. Dynamic Ramp Protection DRP 3.0. Inside layer galvanized, coil-coated fine sheet, plastic-coated. Front wall insulated, NX17 foam, reinforced to accommodate refrigeration units. FP side wall insulated, COOL 45, NX17 foam. Pair of load securing rails, perforated rail at side wall STD-M recessed (13,400). Floor with center anchor rail 730 mm. Circulation wall approx. 1,890 mm high, made of aluminum hollow profiles. FP roof insulated, NX17 foam. Hat profile spacer as pallet stop for circulation wall V7. Double-winged rear door insulated, NX17 foam, with simple stainless steel lock. Base scuff plate – extruded profile 300 mm on rear door. Rubber door protector strips at rear bottom. Additional impact protection on rear door frame, lower crosspiece. Multifunction floor, MFF, test load 5,500 kg V7 (13,400). Height-adjustable DOST system type B1650 for 11x3 EURO pallets with 22 aluminum carrier bars. SKO V7 interior box lighting, extra bright (Plus). Cover for temperature recorder/printer. SCHMITZ plastic fuel tank black 245 l, 1 filler neck, suitable for biodiesel. TrailerConnect temperature recorder according to EU directive 12830. Air duct with tension band mounting 10,200 mm long, with openings in front of bulkhead po Ppedpfx Ajyumk Dsg Djr

Condition: good (used), Year of construction: 2000, power: 200 kW (271.92 HP), Heat exchanger from hot water to air, ideal for drying. Size approx. 3 m x 1.5 m. Estimated thermal output 200 - 300 kW, possibly more. One fan is missing. Pedey D E Rpjpfx Ag Depr

Condition: used, For sale: MAWERA 470 kW Biomass Boiler – Robust Industrial Woodchip Heating System The MAWERA biomass boiler with a nominal heat output of 470 kW is ideally suited for industrial and agricultural heating applications with a consistently high heat demand. Austrian quality, durable construction, and efficient heat transfer are hallmarks of this boiler. --- Technical Specifications: • Fuel types: Woodchips, sawdust, planing shavings • Nominal heat output: 470 kW • Combustion system:   ◦ Feed auger for fuel transport   ◦ Combustion chamber with heat-resistant fireclay lining • Control & air supply:   ◦ Primary and secondary air controlled via motorized dampers and blowers   ◦ Temperature-based control featuring flue gas and combustion chamber sensors • Boiler design:   ◦ Water-bearing boiler with generously sized heat exchanger surface   ◦ Front and rear firebox doors for easy access and maintenance --- Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) TOP HEATING SYSTEMS – Used heating equipment, boilers, heat pumps & accessories direct from stock We are a family-run business with around 20 years of experience in heating technology. Our 1,500 m² warehouse in Mosonmagyaróvár, Hungary, maintains a constantly available stock of approximately 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – about 15 km from the Austrian border and 80 km from Vienna. Mosonmagyaróvár is the first major city on the Hungarian side after the Austrian border. 🔥 Our product range includes: • Woodchip boilers • Pellet boilers • Wood gasification boilers • Log wood boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermo ventilators • Hot air blowers • Warm air heaters • Industrial heating systems • Buffer tanks • Heat exchangers • Conveyor augers • Automatic fuel extraction systems • Burners • Pumps • Comprehensive heating accessories ⚙️ Accessories and components: We also stock a wide selection of accessories, including circulation pumps, plate heat exchangers, and many other components—from domestic to industrial specifications. 🏭 Brands in our portfolio: Podpfx Agsmuzq Ee Dspr Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current offers: Most of our current offers can be found on our website: topheatingsystems.com We also have additional equipment not yet listed online. 📅 Inspection: Viewing is available by appointment at our warehouse. If interested, please contact us—we are happy to assist you in finding the right solution.

Condition: used, axle configuration: 2 axles, first registration: 12/2021, loading space length: 13,403 mm, loading space width: 2,490 mm, loading space height: 2,650 mm, Year of construction: 2021, Operating hours Diesel: 5,468 / Mains: 296 Body strength certified according to DIN EN 12642 Code XL ("TÜV Load Securing Certificate") 2 rear markings 565x200 ECE-R70 mounted horizontally on rear wall Vehicle complies with EC type approval and supplied with Certificate of Conformity (CoC) Body certified according to HACCP guidelines, incl. HACCP certificate and sticker on STW Ppodsyumkwjpfx Ag Der International customs seal for body with rear door, with customs seal acceptance Customs seal capability guaranteed by customer when external KG is fitted 10-year anti-corrosion warranty (see warranty conditions) E-bike holder, basket design for 2 e-bikes behind the unit, SKO COOL 4 pairs of ferrylashings to DIN/ISO 9367 for SKO COOL, with support stand Model SKO 24/L - 13.4 FP COOL V7 Manufacturing Date 07.12.2021 Body length 13,403 mm Body width 2,490 mm Body height 2,650 mm Usable body length 13,315 mm Usable body height 2,550 mm Overall height unladen 4,008 mm Overall height front unladen 4,021 mm Overall height rear unladen 4,005 mm Loading height rear unladen 1,274 mm Tyre size 385/65R22.5 GVW (perm./ technical) 36,000 / 39,000 kg Axle load (perm./ technical) 24,000 / 27,000 kg King pin load (perm./ technical) 12,000 / 15,000 kg Tare weight complete 7,965 kg Fifth wheel height unladen 1,150 mm Reference length outside 13,550 mm Body width 2,600 mm Rear door height 2,640 mm Rear door width 2,490 mm ROTOS SCB running gear system (disc brake) SCB axle 9 t, SP2040, FM1300, ET 120, disc brake 430 mm Wheel fixation via hub centering to DIN 74 361 Part 3 Hubodometer analog, centre right Two-line compressed air braking system with standard couplings EBS 2S/2M with stability program EBS power supply via ISO 7638 + CAN Lift and lowering device with AUTO-RESET function 24V lighting system with double round 3-chamber lights and 1 rear fog lamp Rotary switch for interior lighting, holder arrangement for light and brake connections 2 sockets 7-pin (1x DIN ISO 3731 / 1x DIN ISO 1185) and 1 socket ISO 12098 LED side marker lights connected to indicators 2 outline marker lights front (white), 2 rear (red) 2 position lights and corner marker bottom 2 separate reversing lights LED perimeter lighting right and left, mounted near landing leg Tyre brand SCB "SELECTION" - Continental/Goodyear/Dunlop/Hankook/Pirelli/Bridgestone Plastic toolbox with lid holder, shelf and drawer behind 2 large vertical rubber bumpers on lamp bracket Pallet box for 36 Euro / 24 ISO pallets Ground clearance pallet box 291 mm Dynamic Ramp Protection DRP 3.0 Polyurethane rigid foam panels thermal bridge free - vapor diffusion tight Inner skin galvanized coil-coated steel, plastic coated Front wall insulated, NX17 foam, reinforced to accommodate cooling unit FP side wall insulated, COOL 45, NX17 foam Pair of load securing rails slot-perforated at side wall, STD-M, built-in (13,400 mm) Floor with centre 1 anchor rail 730 mm Circulation wall approx. 1,890 mm high, aluminium hollow profiles FP roof insulated, NX17 foam Hat profile distance as pallet stop for circulation wall V7 Double rear door, insulated NX17 foam, simple stainless steel locking Scuff rail extrusion 300mm at rear door Additional underrun protection on lower rear frame Multifunction floor MFF, test load 5,500 kg V7 (13,400)

Condition: good (used), Year of construction: 2001, Wood chip heating system, feed-in with underfeed screw. Was only used during the transitional period. Heating capacity up to 550 kW. New parts such as grate, underfeed trough, and feed screw have been replaced. Dismantling has already been carried out. Location: Passau area, but on the Austrian side. Ppedpsyhl Dcofx Ag Dsr

Condition: new, Catalog number: H0561 – new machine, in stock – CE certificate – Austrian production – professional – trolley on steel bars TECHNICAL DATA engine power S1 5500W (/750) voltage 400V / 50Hz table height 890mm extraction connector 100mm sliding table 3200x435mm extension table 1200x550mm max. cutting width with gauge 1300mm disc diameter 250-400mm (30) scoring blade diameter 120 x 20 x 3.2-4.2/2.2 mm rotational speed I: 3000; II: 4000; III: 5000 rpm Rotation speed of the scoring saw 8000 rpm Motor power of the scoring saw 750 W Blade tilt 0-45 ° Acoustic power level 90 dB (A) Acoustic pressure level 88.2 dB (A) Overall dimensions of the machine when unfolded L / W / H 3350 x 3600 x 900 mm Shipping dimensions 1350 x 2200 x 1170 mm Net/gross weight 930 / 1110 kg Features: - solid construction Podpfx Ageyg Iu Ij Depr - with a large aluminum sliding table and boom, ideal for machining large elements and cutting large, heavy boards to size - cast iron work table (1100 x 700 mm) with table extension (900 x 830 mm) and table extension (610 x 600 mm) with solid steel construction – extension table (1200 x 550 mm) + cutting fence (1950 – 3300 mm) – scoring saw with separate motor – manually adjustable main saw blade angle 0°-45° (using angle indicator) – electric height adjustment of main saw blade and scoring saw Scope of delivery: LEUCO TCT main blade (Ø300 x 30 x 3.2 mm T72) LEUCO scoring saw blade (Ø120 x 20 x 3-3.8 T=2*12ES) Pressure beam – option Net price: PLN 24,300 Net price: EUR 5,750 depending on price EUR 4.20 (Prices may vary with higher fluctuations)

Condition: excellent (used), Catalogue number 7259 TECHNICAL DATA - Infeed width: 400 mm - Infeed height: 200 mm - Shaft width: 530 mm - Shaft diameter: 550 mm - Knife length: 530 mm - Number of knives: 2 pcs - Screen dimensions: 50x50 mm - 2 lower toothed feed shafts - Lower shaft motor: 2.2 kW - Upper toothed feed shaft - Upper shaft motor: 2.2 kW Pjdpoyka E Tefx Ag Dspr - Conveyor belt feeder: 0.55 kW - Feeder belt length: 3000 mm - Feeder belt width: 410 mm - Main motor: 45 kW - Auto-reverse - Reverse operation - Machine dimensions (L/W/H): 2900x1600x1600 mm - Feeder dimensions (L/W/H): 3070x720x670 mm - Weight approx. 3500 kg ADVANTAGES – German manufacture – Auto-reverse (adjustable) – Reverse function – Used shredder in very good condition Net price: 85,900 PLN Net price: 20,450 EUR depending on exchange rate 4.2 EUR (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7374 TECHNICAL DATA - Upper feed hopper dimensions (L/W): 840x620 mm - Lower feed hopper dimensions (L/W): 300x300 mm - Rotor width: 340 mm - Motor: 22 kW - Screen: 15 mm - Number of knives: 6 pcs - Discharge for shredded wood: Ø 160 mm Ppjdpfx Agsy At Nqs Djr - Dimensions (L/W/H): 1400x800x2000 mm - Weight: 840 kg ADVANTAGES – German-made – Very good condition – Used wood chipper Net price: 23,900 PLN Net price: 5,690 EUR based on an exchange rate of 4.2 EUR (Prices may vary significantly with currency fluctuations)

Condition: excellent (used), CATALOG NUMBER 72133 TECHNICAL DATA - Maximum cutting height: 180 mm - Track width: 400 mm - Shaft width: 370 mm - Shaft diameter: 60 mm - Maximum blade diameter: 300 mm - Blade bore diameter: 80 mm - Minimum workpiece length: 630 mm - Maximum workpiece width: 600 mm From above: - Pneumatic hold-down - Pawls - 2 metal pressure rollers - Pawls - Saw shaft - Smooth pressure roller - Pawls - Smooth pressure roller From below: - 2 metal, toothed feed rollers - Pawls - Track - Saw shaft Podpfx Agoyr Rmqs Dspr - Track - Stepless feed speed adjustment via inverter - Main motors 2x55 kW - Feed motor 4 kW - Hydraulic lifting of the top/bottom frame - Hydraulic adjustment of saw shafts - Pump motor 0.37 kW - Central lubrication - Suction connector diameter: 1x300 mm, 1x380 mm - Dimensions (LxWxH): 3200x2350x2000 mm - Weight approx. 5500 kg ADVANTAGES – Italian manufacture – Double-shaft – Used multi-blade saw, in very good condition Net price: PLN 238,900 Net price: EUR 56,880 Net price calculated at an exchange rate of 4.2 PLN/EUR (Price may change with significant exchange rate fluctuations)