Used Mcm Tour Apprentissage Teach-In Cnc Lathe for sale (26,629)

Condition: excellent (used), Year of construction: 2004, operating hours: 1,000 h, functionality: fully functional, turning diameter over cross slide: 380 mm, turning length: 350 mm, turning diameter: 200 mm, travel distance X-axis: 240 mm, rapid traverse X-axis: 12 m/min, Hembrug Mill-Turn Machine Model: Slantbed Mikroturn 100 CNC Siemens 840D Control Approximate Actual Run Time Hours: 1,000 Hydeostatic Spindle Hydrostatic Ways Scale Feedback Suspended Granite Bed Garnite Spindle Housing Coolant Pump Coolant Circulation Pump Pneumatic Bearing Purge Hydraulic Temperature Control Coolant Temperature Control Return Oil Pump and Reservoir for Remote Location of Hydraulic / Cooling Unit. Options & Additional Purchased Features: Tailstock Vacuum Pump for Vacuum Chucking Programable Controlled Spray Mist C-Axis Milling / Drilling Renishaw Tool Touch Probe Non-Contact Tool Incoming Air Dryer / Filter Thousands of Dollars of Brand New Tooling: Live Center Tailstock Taper Adapter 8” Micro-Centric Pneumatic Chuck 3 Sauter Straight Live tooling heads 2 Sauter 90 degree Live tooling heads 1 Special VDI offset Tooling holder 16 VDI Tool Holders for Turning, boring, and on center drilling. Tool Pick-up Video System Additional Backup Hard Drive with Software Fully Loaded and Tested. Extra Siemens Control Pannel Complete Set of Manuals Machine Upgrades I added at additional cost. New Digital Hard Drive New Backup Hard Drive with software already loaded, plug and play ready, no downtime. New Z-Axis Heidenhain Scale Kjdpfxewcfgbs Am Nelr Rewound Hydraulic Pump Motor, factory motor was running too hot for my liking. Replaced Operator Panel, back light on monitor went out, have the original, back light needs replacing. 50 Foot Extended Wiring Harness For Remote Location of Hydraulic / Cooling Unit.

Condition: good (used), Year of construction: 2013, control Siemens 840D sl turning length 2000 mm turning speeds max. 3100 1/min Torque 1200 Nm diameter of quill 140 mm quill power 5-30 kN total power requirement 125 kW weight of the machine ca. 20 t The machine can still be inspected under power at the seller's factory. It is in good condition, the precision of the turning operation is very good. The milling drive is not functional. An offer from Niles for the repair of the milling drive is available on request. Hydraulic steady rest included. Technical details: Turning length 2000 mm Control Siemens 840 D sl Main spindle: Speed max.3800 1/min Main spindle: Torque max. 1200 Nm Pinole diameter 140 mm Center point MK6 Quill force 5 - 30 kN Feed speed Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Kedpfx Amov Nw Npo Nelr Total power requirement 125 kW Machine weight approx. 20 tons

Condition: used, Year of construction: 2007, turning length 2500 mm control Sinumerik 840 D spindle head A 11 Kedpfxswwarue Am Nolr tool numbers 48 swing diameter over bed slide 750 mm swing over bed 780 mm c-axis 0,1-30 1/min diameter of quill 160 mm taper bore MK 5 tool length - max. 500 mm weight of tools max. 15 kg weight of the machine ca. 27 t dimensions of the machine ca. 8,4 x 4,0 x 2,5 m Technical details: Nominal turning length: 2,500 mm Swing diameter over bed slide: 750 mm Swing diameter over bed: 780 mm Working height: 1,300 mm Spindle head to DIN 55026: A 11 Bore through: 123 mm Diameter in front bearing: 200 mm Oriented spindle stop: 0-359 degrees Drive power at 100/60 % duty cycle: 37/45 kW Total speed range: 10-2,500 1/min Number of speed ranges: 2 Speed range I: 10-775 1/min Speed range II: 20-2,500 1/min Max. torque at 60 % duty cycle: 2,500 rpm. Torque at 60 % ED: 2,083 Nm (up to 186 rpm)

Condition: used, Year of construction: 2008, control 840 D Sinumerik weight of the machine ca. 25 t dimensions of the machine ca. 5100 x 3034 x 4500 mm Technical Details: Largest workpiece diameter Ø 1000 mm Kodowwar Ijpfx Am Nolr Internal workpiece diameter Ø 100-500 mm Largest workpiece length 500 mm Largest oscillation diameter 1250 mm Workpiece spindle flange diameter 520 mm Through-hole of the workpiece spindle Ø 45 mm Workpiece spindle speeds NC - programmable 0-440 rpm Table strokes: Z1/Z2 axis 1000 mm, X1/X2 axis approx. 1300 mm Table speed infinitely variable: Z axis 0-30 m/min, X axis 0-50 m/min Infeed speed infinitely variable 0.01-15 mm/min Infeed stroke-dependent 0.0005-0.1 mm Workpiece spindle positioning C-axis Operating voltage 3~400 VAC/50 Hz SINUMERIK 840 D control Machine connected load approx. 75 kW

Condition: good (used), Year of construction: 2015, machine/vehicle number: 190630, turning length: 150 mm, turning diameter: 200 mm, spindle bore: 42 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 50 rpm, travel distance X-axis: 150 mm, travel distance Z-axis: 155 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, turning diameter over bed slide: 220 mm, overall weight: 5,000 kg, spindle nose: 140 Flat, bar diameter (max.): 51 mm, power: 0.015 kW (0.02 HP), The innovative front-facing spindle of the 2SP-150H helps create an automation-friendly lathe for small parts production. By moving the spindle off the side and incorporating the Okuma Gantry Loader (OGL) into the production line, parts can be loaded and unloaded automatically. An extremely compact footprint improves floor space utilization, while the popular dual spindle option significantly reduces cycle time. Equipped with: Ksdjrtrlzspfx Am Nolr Okuma OSP-P300L CNC Control 8" 3-Jaw Chuck Expanding Mandrel Turret Tooling Gantry Loader Pendant Controller Chip Auger Stack Light

Condition: ready for operation (used), Year of construction: 2014, turning diameter over cross slide: 370 mm, turning length: 2,000 mm, spindle bore: 104 mm, spindle speed (max.): 2,000 rpm, Model: Alpha 1550 XS Year: 2014 Control: FANUC Oi-TD Swing Over Bed: 554mm Swing Over Cross Slide: 370mm Swing in Gap: 830mm Distance Between Centres: 2000mm Spindle Bore: 104mm dia. Spindle Speeds: 1 to 2000 RPM Machine with: 3 - jaw chuck Kodpfx Amoy Dubwo Njlr 4 - jaw chuck Fixed Steady Quick Change Toolpost

Condition: excellent (used), Year of construction: 2006, Doosan Puma 700L Turning Centre with Fanuc Series 21i-TB CNC Control, 600mm Diameter Powered 3 Jaw Chuck, 3000mm Between Centres, Swing 1030 mm Turning dia 900 mm Fixed steady included Chip conveyor Spindle motor 45 kw Power requirements 62.2 kva Dims 7.1 x 2.2 x 2.2 m 10 Position Tool Turret, Tailstock, Machine Weight 21500kg. S/No. P60L0377 (2006) Machine is in excellent used condition Kodpfxey Akdls Am Nelr Videos can be sent on request

Condition: used, 4 Axis Year Of Manufacture: 1998 8” Chuck 2 Turrets – Turret 1 – 12 Stations Turret 2 – 8 Stations Kljdpfx Amsy Drune Nor Programable Tailstock 750mm Between Centres Live Tooling C Axis Touch setter Y axis Swarf Conveyor Okuma OSP 7000L Control

Condition: used, Year of construction: 1995, functionality: fully functional, Equipment: documentation/manual, rotational speed infinitely variable, Mori Seiki Lathe 3 Axes X, Z, C Model SL-45 MC Year 1995 Fanuc CNC Ksdpfxjy Emz Ee Am Nolr Without jaw chuck With tooling With chip conveyor With documentation Complete machine

Condition: used, Year of construction: 2001, turning diameter 550 mm turning length 900 mm Ksdpfxox Sr Eio Am Nelr control Fanuc O-TC weight of the machine ca. 8165 kg

Condition: used, Year of construction: 2006, spindle speed (max.): 5,000 rpm, total width: 45,000 mm, total length: 19,900 mm, total height: 23,000 mm, travel distance X-axis: 165 mm, travel distance Y-axis: 80 mm, bar length: 600 mm, CNC Lathe (with 2nd spindle, 3 turrets and Y-axis) Spindle bore diameter 65 mm Spindle speed 5.000 R/min Spindle motor 25/20 kW Spindle speed counter spindle 5.000 R/min X-axis movement 165 / 165 / 165 Y-axis movement 80 mm Kljdpjy Egpijfx Am Nsr Z-axis movement 220 / 150 / 650 mm W-axis movement (subspindle to mainspindle) 690 mm C-axis indexing 0,0001° Number of turret 3 Number of tools on turret 12 (3x 12) Tool taper VDI 30 Bar feeder LNS Quick Load Servo 65 If you have any questions concerning the machine, please do not hesitate to contact us by phone or e-mail. Feel free to view our other advertisements for a complete overview of our stock.

Condition: excellent (used), functionality: fully functional, turning diameter over cross slide: 700 mm, turning length: 5,500 mm, turning diameter: 1,000 mm, spindle bore: 105 mm, spindle speed (max.): 1,000 rpm, GURUTZPE AT 600 PLUS LATHE WITH GROUND BED, AUTOMATIC TURRET, AND NEW FAGOR 8058 CNC Kedpsyivadsfx Am Nolr

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, turning diameter over cross slide: 740 mm, turning length: 6,000 mm, turning diameter: 1,100 mm, spindle bore: 162 mm, spindle speed (max.): 800 rpm, travel distance X-axis: 680 mm, travel distance Z-axis: 1,200 mm, spindle motor power: 42 W, rapid traverse X-axis: 8 m/min, rapid traverse Z-axis: 8 m/min, overall weight: 15,000 kg, spindle nose: 162, GEMINIS CNC 7 PLUS 1100x6000 lathe Kodpfeyiu S Esx Am Nslr Equipped with: 4-jaw chuck 1000 mm 4-jaw chuck 600 mm 2 fixed steadies Chip conveyor

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Nice Microcut Challenger lathe turning over bed 550 mm in gap 770 mm Klodsy D Talspfx Am Nor over slide 320 mm Center length 1500 mm Control Siemens 810D Chip conveyor Coolant equipment Multifix toolpost with 10 holders Fixed steady Travelling steady 3 jaw chuck manual All manuals present

Condition: like new (used), Year of construction: 2021, operating hours: 1,200 h, functionality: fully functional, turning length: 2,000 mm, turning diameter: 1,100 mm, power: 46 kW (62.54 HP), distance between centers: 2,000 mm, load hours: 1,200 h, Equipment: rotational speed infinitely variable, A DMT CD1100 lathe with Heidenhain control and only 1,200 operating hours is available. The working area offers a swing diameter of approx. 1,100 mm over the bed and approx. 800 mm over the cross-slide. The tool holder is a Multifix D1. The distance between centers is 2,000 mm. The main spindle drive is a motor with 46 kW output at 60% duty cycle and two gearbox stages. Tailstock: Kljdpfx Aexlza Hjm Njr - Quill diameter: 125 mm - Taper: 6 Morse taper Delivery: Collection by the buyer Payment: 100% via bank transfer immediately upon invoicing, prior to collection All information is non-binding. Subject to prior sale. The machine is sold without any guarantee or warranty claims and remains our property until full payment is received.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, CNC Turning and Milling Center Okuma LT 2000 EX -MY 2ST Control: OSP-P300L Year of manufacture: 2013 Internal machine no. 24 Swing diameter over bed: 400 mm Centre distance: 960 mm Turning diameter: 210 mm Spindle speed: 50 – 6,000 rpm Sub spindle speed: 50 – 6,000 rpm Travel paths: W-axis: 730 mm X-axis: 205 mm Kedsyvfhdspfx Am Nolr C-axis: 360 degrees (0.001°) 2 tool turrets, each with 16 stations (all stations driven) Equipment: - Chip conveyor - Paper band filtration system with high-pressure pump - 2x 3-jaw chucks Kitagawa - OGL gantry loader, approx. 5 kg load capacity - 20-station stacking magazine - Touch setter - Renishaw probe - Extraction unit - Various accessories

Condition: excellent (used), Year of construction: 2021, CNC Lathe Okuma Genos L3000 e MYW Control: OSP-P300LA-e Year of manufacture: 2021 Internal machine no.: 15 Max. machining diameter: 390 mm Swing diameter over cross slide: 260 mm Max. turning length: 500 mm Travel paths: X-axis: 235 mm Z-axis: 450 mm Y-axis: ±50 C-axis: 360° / 0.001° Turret: 12 stations – all driven Spindle speed: 38 - 3,800 rpm Tool holder: VDI 40 Accessories/Equipment: - Chip conveyor - Touch setter - One Touch IGF - Parts catcher - Reinforced coolant system 8 bar - Extraction unit Kljdpfxsyt E A Ns Am Njr

Condition: used, Year of construction: 2000, max. 800 mm turning length max. 800 mm chuck ohne documentation inkl. control Okuma OSP turning speed range 10-2800 U/min bar material dia. ca. 91 mm spindle nose A2-8 output 44 kw chucking diameter ca. 450 mm 12 Fach tail stock ca 150 mm weight of the machine ca. 8 t +++++ Please note: Kljdpfoh D Anaox Am Ner The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. +++++

Condition: ready for operation (used), Year of construction: 2013, Available immediately from university: L & Z Eagle Lathe Type LC 340 Year of manufacture: 2013 Center height: 170 mm Swing over bed: 340 mm Kledpfx Amoy Emh Ee Njr Swing over cross slide: 205 mm Turning length: 1000 mm Spindle bore: 38 mm Drive: 1.5 kW Spindle speeds: 60 – 2000 rpm Tailstock quill: 40 mm Chuck: 160 mm Faceplate: 200 mm Four-way tool post Weight: 2 t Price: EUR 2,000 – plus VAT, ex location

Condition: good (used), Year of construction: 2023, Cycle-controlled lathe Machine type: Kern CD 402 x 1000 Control: Heidenhain Manual Plus 620 HSCI Year of manufacture: 2023 Available from: immediately / now TECHNICAL DATA: Max. turning length: 810 mm Distance between centers: 1,000 mm Turning diameter: 230 mm Max. swing over bed: 400 mm Spindle bore: 64 mm Speed range: 1 - 3,000 rpm Drive power: 16 kW C-axis Kodpfxjy Ec Stj Am Nelr Number of turrets: Tool stations: 8 Tool holder: Multifix B Speed of driven tools: 4,000 rpm Tailstock: MT4 Quill stroke: 140 mm Quill diameter: 60 mm Features: 3-jaw chuck: 255 mm Forkardt F+ 255 mm High-pressure pump: 15 bar Coolant gun

Year of construction: 2014, condition: used, Empty weight: 4.050 kg Dimensions (LxBxH): 299 x 178 x 275 cm Serial number: ML0032-000444 Swing diameter above bed: 651 mm Swing diameter above slide: 461 mm Recommended swivel diameter: 254 mm Max. Turning diameter: 370 mm Max. Turning length: 712 mm Hollow spindle: 76 mm X-axis displacement: 255 mm ( 185 + 70) Z-axis displacement: 790 mm Spindle speed: 3500 rpm Tool changer: 12 positions Rapid traverse (X/Z axis): 30 / 24 m/min Control system: Siemens Sinumerik 828D Weight: 4050 kg Dimensions (LxWxH): 2993x1785x2750 mm Kedpfoy D Ex Tex Am Nslr Equipped with: tool setting device, parts catcher, chip removal, oil mist extraction and documentation Online auction of well maintained metalworking machines (a.o. 2015 DOOSAN LYNX, 2015 DOOSAN DNM500-II, UNISIGN, GILDEMEISTER, MORI SEIKI, KELLENBERGER, OKUMA, SUNNEN etc.), grinders, (overhead) cranes and rolling stock (a.o. 2x HYSTER forklifts) originating from the recent bankruptcy of NPL Machinefabriek BV, manufacturer of gears and technical components for machine building, in Hengelo, The Netherlands. The online auction opens Wednesday 1 April and closes Thursday 23 April. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Viewing day is on: - Friday 17 April Pickup days are on: - Monday 4 May - Tuesday 5 May Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: used, Empty weight: 4.980 kg Dimensions (LxBxH): 285 x 170 x 174 cm Serial number: 2021 Swing diameter over the bed: 530mm Swing diameter over the carriage: 340mm Distance between centers: 520mm Maximum turning diameter: 340mm Maximum turning length: 500mm Number of axes: 2 X-axis displacement: 520mm Z-axis displacement: 260mm Spindle type: JIS A2-6 Spindle speeds from/to: 45-4500rpm Hole spindle: 62mm Number of places on turret: 12 Control system: Okuma OPS7000L Equipped with: tool presetter, counter center, workpiece catcher preparation, 205mm 3-jaw kitagawa chuck, mayfran chip discharge, documentation. Dimensions LxWxH: 2850x1700x1745mm Machine weight: 4980kg Online auction of well maintained metalworking machines (a.o. 2015 DOOSAN LYNX, 2015 DOOSAN DNM500-II, UNISIGN, GILDEMEISTER, MORI SEIKI, KELLENBERGER, OKUMA, SUNNEN etc.), grinders, (overhead) cranes and rolling stock (a.o. 2x HYSTER forklifts) originating from the recent bankruptcy of NPL Machinefabriek BV, manufacturer of gears and technical components for machine building, in Hengelo, The Netherlands. The online auction opens Wednesday 1 April and closes Thursday 23 April. Register your account via our website and place your bid. For viewings and inspections check the auction information on the website. Klodpfoy D Exyjx Am Ner Viewing day is on: - Friday 17 April Pickup days are on: - Monday 4 May - Tuesday 5 May Dome Auctions is an innovative auction platform dedicated exclusively to the industrial sector. By focusing on machinery sales from business closures, restructurings, and bankruptcies, we provide a trusted marketplace where buyers and sellers connect with confidence. Unlike general auction houses, Dome Auctions specializes in selling complete industrial assets directly from factories, ensuring quality and reliability. With a commitment to transparency, industry expertise, and tailored service, we streamline the sales process and maximize value for all parties. As online auctions continue to grow in the European industrial market, Dome Auctions offers a professional and efficient solution for companies seeking high-quality machinery at competitive prices.

Condition: as good as new (ex-display), Year of construction: 2019, functionality: fully functional, turning diameter over cross slide: 415 mm, turning length: 850 mm, turning diameter: 390 mm, spindle bore: 105 mm, spindle speed (max.): 2,000 rpm, travel distance X-axis: 225 mm, travel distance Z-axis: 950 mm, rapid traverse X-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, total height: 1,980 mm, total length: 4,600 mm, total width: 1,900 mm, quill diameter: 100 mm, quill stroke: 120 mm, overall weight: 7,000 kg, bar passage: 90 mm, chuck outer diameter: 300 mm, controller manufacturer: Siemens, controller model: 828D + Shopturn, Equipment: documentation/manual, max. turning diameter 390 mm Z-axis travel: 950 mm max. spindle speed: 2000 rpm AC spindle motor SIEMENS (cont./15min) 25/33 kW bar capacity: 90 mm spindle nose: A2-11 Including accessories a. o: SAUTER 12-station turret VDI-40 Trifix holder for driven tools C-axis with spindle clamping and stabilization Wide and stable flat guides 45° inclined bed for optimum chip fall Hinged belt chip conveyor with chip bucket 3-jaw Kitagawa power chuck ø 300 mm Klodefk Et Aspfx Am Njr Tool measurement can be swiveled in manually Hydraulic tailstock manually adjustable with programmable tailstock quill Coolant unit with powerful pump (4 bar) Rittal filter fan on the control cabinet

Condition: good (used), Year of construction: 1999, 4-axis CNC lathe with sub spindle and 2 turrets Control: Fanuc 18iTA Upper turret: 12 driven stations Lower turret: 12 driven stations C-axis: 0.001° on both spindles Main spindle: 11 / 7.5 kW Sub spindle: 7.5 / 5.5 kW Spindle speed: 50 - 5,000 rpm on both spindles Bar capacity: 45 mm Spindle nose: ASA A2-5 Turning diameter: 440 mm Turning length: 360 mm Chip conveyor Parts catcher Bar feeder interface Kodpfx Ajy Enhmom Njlr Bar feeder: LNS Mini-Sprint S2 42/3M

Condition: good (used), Year of construction: 2008, functionality: fully functional, turning length: 1,240 mm, turning diameter: 380 mm, Machine Type: CNC Lathe Manufacturer: Hwacheon Model: Hi-Tech 300 Kedpfxjy D Tigj Am Nslr Year of Manufacture: 2008 Control: Fanuc 18i-TB Country of Origin: Korea Delivery Time: available from stock >> Extended turning length configuration >> Driven tools >> Includes tailstock with quill >> Includes bar loading magazine >> Includes additional accessories This horizontal CNC lathe is in very good condition. The machine comes with a comprehensive equipment package, including a full-featured C-axis, touch setter, 3 spindle reduction sleeves, driven tools, tailstock with quill, 3-jaw hydraulic chuck, extended turning length (1240 mm), among others. The extensive features enhance machining capabilities and ensure tool break monitoring. The additional bar loading magazine further increases production productivity. Machine Equipment > Chip conveyor > Bar loading magazine > 3 spindle reduction sleeves > Turning and milling spindle > Driven tools (4 holders available) > Tailstock with quill > Boxways > 3-jaw hydraulic chuck 250 mm (Seoam ACE CAH-10) > Full-featured C-axis > Touch setter Technical Data Performance Swing diameter over bed: 600 mm Max. turning diameter: 380 mm Max. turning length: 1240 mm Spindle Main spindle power: 22 kW Main spindle torque: 1030 Nm Main spindle speed: 3200 rpm Main spindle chuck diameter: 254 mm Bar capacity: 76 mm Rapid traverse X/Z-axis travel speed: 20 / – / 20 m/min Turret Number of tool stations: 12 positions Driven tool speed: 3000 rpm Drive power: 3.7 kW Tool system (type): BMT Direct drive: 6 powered stations C-axis: 0.001° Tailstock Quill diameter: 100 mm Quill stroke: 120 mm Taper: MT5 Bar feed magazine Type: Samsys Multisam 2000 Bar length: max. 1550 mm