Used Meccanotecnica Folding Machine for sale (66,674)

Condition: new, neu ca. 6 Monate ab Auftragse Taiwan 62000 € 1171.8 € 3100 mm 2 mm Hydraulisch Blodpfxsynnaaj Af Reh 135 ° 5 kW 4370 mm 1770 mm 1790 mm WITH VERTICAL UPPER BEAM MOVEMENT FOR THE USE OF FLAT AND HIGH TOP RAILS hydraulic driven NC control for bending angle manual back gauge 600 mm sharp flat upper rail 45° (in one piece) mechanical crowning adjustment clamping force adjustment upper beam vertical according to CE rules Optionen: sectionet upper rail, height 100 mm motorized back gauge, 800 mm with 2-axis touch control

Condition: good (used), MBO T500F Folding Machine Blsdpfxjzaz Sae Af Reh Machine in very good condition, ready to work. Minimum paper size: 105 x 150 mm Maximum paper size: 520 x 720 mm High stack feeding 4 cassettes with micro-adjustment and cutting Casket and compressor noise reduction Electronic counter with batching Electric delivery Machine in very good condition, ready to work.

Year of construction: 2004, condition: ready for operation (used), Infeed width: 660mm, equipment: pallet feeder PD-66-T, Tremat sheet separation system, six folding plates in the parallel folding section, downstream knife shaft, two folding knives in the cross-fold section, one additional folding plate after the 1st cross fold and pressing station with standing sheet delivery SB-46/MP.D. The system is technically without problems, rollers need to be replaced. An on-site inspection is possible. Bsdsy Ull Iepfx Af Rjlh

Condition: good (used), Year of construction: 1990, Year: 1990 Format max:550x 920mm 6 cassettes 2 electronic crosses compressor Tremat Bsdpsd Dikcjfx Af Rslh New belts Instruction Perforation

Condition: used, Year of construction: 1982, Technical details: sheet width: 1500 mm plate thickness: 1,5 mm distance between columns: 1760 mm knife length: 152 mm bending angle max.: 160 ° total power requirement: 1,3 kW Weight approx.: ca. 800 kg Bsdpfx Aou Ibzwof Relh dimension machine xH: 2,5x0,7x1,5 m - adjustment of the upper cheek 350mm - adjustment of the bending cheek / lower cheek 60/60 motoric - bending edge up to max. 10mm radius - without back gauge - upgrade possible -manual counter - foot pedal (pedal left/right) accessories: - 1 set tools *

Condition: used, Technical details: sheet width: 2004 mm plate thickness: 2,5 mm distance between columns: 2040 mm Total power requirement: 3 kW bending angle max.: 180 ° Weight approx.: 1700 kg Bledpeya Eq Hefx Af Rsh dimension machine xH: 2,7 x 1,3 x 2,0 m

Condition: used, Technical details: plate thickness: 1 mm distance between columns: 2,255 mm bending angle max.: 130 ° Bedpfswq I U Rex Af Relh total power requirement: 2,25 kW Weight approx.: 1400 kg dimension machine xH: 2,7 x 1,15 x 1,3 m Machine without foot switch but this is pre-equipped the upper beam was converted to 60 mm adjustment by the previous owner higher is only possible when dismantling for automatic operation the foot control is missing manual operation O.K. No backgauge *

Condition: used, Year of construction: 1992, Technical details: plate width: 1550 mm Blsdpfsu Ib Anjx Af Rjh plate thickness: 2,5 mm distance between columns: 1630 mm knife length: 1550 mm stroke adjustment: Oberwange: 90manuell / 70hydr. mm stroke adjustment: Unterwanne/Biegewanne: 105 manuell mm stroke adjustment: Biegewage: 40 mm bending angle max.: 93 (L-/Z-biegen) und 180° Zufalten ° back gauge: nein - no total power requirement: 4,5 kW weight of the machine ca.: 1,8 t dimension machine xH: 2,6 x 1,1 x 1,7 m dimensions of hydaulic: 1400 x 700 x 1480 mm This is a hydraulic swing bending machine bending capacity 2,5mm with approx. 400N/mm² strength Hydraulic OILTECH with approx. 200 liters *

Condition: used, Year of construction: 1988, Technical details: plate width: 2050 mm plate thickness: 2 mm distance between columns: 2400 mm knife length: 2050 mm stroke adjustment: oben 250 mm adjustment of stroke: unten 100 mm bending angle max.: 180 ° back gauge - adjustable: mit Aufnahmeschienen mm working pressure: 5,0 MPa total power requirement: 2,2 kVA weight of the machine ca.: 2,3 t dimension machine xH: 3,5 x 1,0 x 2,2 m dimensions of hydaulic: 0,75 x 0,55 x 0,80 mm HYDRAULIC FOLDING MACHINE Bsdpfx Afeu Ib Dfe Rslh operation via control panel with boom as well as via foot switch bending angle: sharp bending = up to 135° with 2mm sheet metal stroke of the upper beam = 250mm stroke of the lower beam = 100mm bending jaw stroke = 100mm bending gap = 7mm with scale display *

Condition: used, sheet width 3200 mm Bedpfx Afor Ngtfs Relh plate thickness 2,5 mm weight of the machine ca. 3,5 t Tools recentely grounded. Bending angle preselection via potentiometer

Condition: used, Year of construction: 2003, Format: 520 mm Equipment: Flat stack investors Station 1: 4 Bags Blodpfx Afey T Rbro Roh Station 2: 4 Bags

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 53600 € 1013.04 € 2050 mm 3 mm 2 mm 4 mm Motorisch 3350 mm 2200 mm 1900 mm 3800 kg 1000 mm CNC control with tabular programming - 15,6" touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length Bljdpfx Aswiq E Nsf Rjh - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in the sheet metal inserts Upper beam opening 220 mm (without tools) Manual bending beam adjustment 35 mm Upper beam with 45° geometry Upper tool 20° with R1, undivided 2 pcs. Bending beam rail (7 or 10 mm, 15 or 25 mm) Front light barrier protection 3-way foot pedal Options: Secstioned goose neck upper tool Pneumatic tool clamping Sectioned lower and bending tool Servo drive for the bending beam Manual crowning system Second foot pedal Side stop Rear light barrier protection 2D or 3D graphic control PC software Special Omega geometry for lower and bending tool Conical back stop Back stop extension Vacuum holder

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 57100 € 1079.19 € 3200 mm 2 mm 1.2 mm 3 mm Motorisch 4450 mm 2200 mm 1900 mm 4500 kg 1000 mm CNC control with tabular programming - 15,6" touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball rollers in the sheet metal inserts Upper beam opening 220 mm (without tools) Manual bending beam adjustment 35 mm Upper beam with 45° geometry Upper tool 20° with R1, undivided 2 pcs. Bending beam rail (7 or 10 mm, 15 or 25 mm) Front light barrier protection 3-way foot pedal Options: Secstioned goose neck upper tool Pneumatic tool clamping Sectioned lower and bending tool Servo drive for the bending beam Manual crowning system Second foot pedal Side stop Rear light barrier protection Blsdpfx Aowiq A Isf Roh 2D or 3D graphic control PC software Special Omega geometry for lower and bending tool Conical back stop Back stop extension Vacuum holder

Year of construction: 2010, condition: ready for operation (used), A Thalmann long folding machine with a touchscreen control system renewed in 2025 is available. Working width: 8200mm, usable width: 8000mm, max. sheet thickness: 3mm, max. upper beam opening: 150mm, bending beam width: 12mm, feed rail: 12mm. Documentation available. An on-site inspection is possible. Bledpfx Asy Tn N Hsf Roh

Condition: ready for operation (used), Year of construction: 2007, Additional Machine Details: Automatic buckles and roller Navigator control 1st unit : 6 motorized buckles Batch counter Noise hood Bedsza Ugdjpfx Af Rjlh Round Pile Feeder Till 230 meter per minute

Condition: used, Year of construction: 2009, Format: 660 x 1040 mm Blodpfx Afsy Tacre Roh Equipment: Feeder: Feeder Mode: Palet feeder Type: PFH-66 Control Unit: MCT control panel Air Stream Table Folding Units: 1st unit Type: BCUH-66 Year: 2009 Pockets: 4x Pocket Type: Combi folding plates Pocket Configuration: manual setting Rollers Configuration: manual setting Roller condition: used condition Cross fold unit with 2x knives Second Knife aligned to: Left & right Noise Protection Hood Monitor Screen Delivery: Delivery mode: Horizontal stack press delivery Type: SBP-M 46.D Technical Details: Sheet size max: 660 x 1,040 mm Pallet feeder max capacity: 800 mm height Sheet size min: 140 x 180 mm Max. mechanical speed: 200 / 230 m/min

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 4010 mm 1.5 mm 2 mm 1.5 mm 5 5 1130 mm 180 mm 915 mm 3 kW 4550 mm 5200 mm 1435 mm 1980 mm 2700 kg 145 ° hydraulic drive standard control additional rail on the bending beam 2x foot pedal removeable material support safety equipment accoring to the control rules BG Germany OPTIONS AS ROTARY SHEAR, CNC CONTROL, BACKGAUGES … ON REQUEST Bledsyrhtuspfx Af Roh Prices ex works Germany. Transport and commissioningat customers place on request.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 5020 mm 1.5 mm 2 mm 1.5 mm 6 6 1130 mm 180 mm 915 mm Blodpfx Asyrhthof Reh 4 kW 6200 mm 1435 mm 1980 mm 3200 kg 145 ° hydraulic drive standard control additional rail on the bending beam 2x foot pedal removeable material support safety equipment accoring to the control rules BG Germany OPTIONS AS ROTARY SHEAR, CNC CONTROL, BACKGAUGES … ON REQUEST Prices ex works Germany. Transport and commissioningat customers place on request.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 6200 mm 1.5 mm 2 mm 1.5 mm 7 Blodpfsyrhtbex Af Rjh 7 1130 mm 180 mm 915 mm 4 kW 7380 mm 1435 mm 1980 mm 3700 kg 145 ° hydraulic drive standard control additional rail on the bending beam 2x foot pedal removeable material support safety equipment accoring to the control rules BG Germany OPTIONS AS ROTARY SHEAR, CNC CONTROL, BACKGAUGES … ON REQUEST Prices ex works Germany. Transport and commissioningat customers place on request.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 1 6200 mm 1.25 mm 2 mm 5 5 1130 mm 180 mm 915 mm 3 kW 7380 mm 1435 mm 1980 mm 3200 kg 145 ° hydraulic drive standard control additional rail on the bending beam 2x foot pedal removeable material support safety equipment accoring to the control rules BG Germany OPTIONS AS ROTARY SHEAR, CNC CONTROL, BACKGAUGES … ON REQUEST Prices ex works Germany. Transport and commissioningat customers place on request. Bodpfx Afeyrhr Rj Rolh

Condition: new, neu ca. 12 - 14 Wochen ab Auf Deutschland 5020 mm 1.25 mm 2 mm 1.25 mm 5 5 1130 mm 180 mm 915 mm 3 kW 6200 mm 1435 mm 1980 mm Bledpfx Afoyrhqas Reh 3000 kg 145 ° hydraulic drive standard control additional rail on the bending beam 2x foot pedal removeable material support safety equipment accoring to the control rules BG Germany OPTIONS AS ROTARY SHEAR, CNC CONTROL, BACKGAUGES … ON REQUEST Prices ex works Germany. Transport and commissioningat customers place on request.

Condition: used, Year of construction: 2014, Folding machine MBO Navigator K8 S-KTL/6 Year: 2014 Description: - 16 page folder - MBO Navigator Feeder Bodpfx Aoy Rlv Sjf Rjlh - Pallet feeder: FP 120 - Pump Folding unit MBO K8 S-KTL/6 - Parallel fold unit with 6 buckle plates: 78 cm - Slitter shaft cassette - First cross fold - Buckle fold underneath first cross fold - Second cross fold to the left - Noise hood over the entire folding section Delivery Palamides Alpha 500 Plus

Condition: used, Year of construction: 2018, gebraucht 2018 080197 prompt, Zwischenverkauf v Deutschland Bsdpsyvvmfsfx Af Rolh 1 4010 mm 1.25 mm 2 mm 1.25 mm 4 4 1130 mm 915 mm 2.2 kW 5240 mm 1435 mm 1950 mm 2600 kg hydraulic drive standard control additional rail on the bending beam 2x foot pedal removeable material support safety equipment accoring to the control rules BG Germany operating manual in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: used, Year of construction: 2010, gebraucht 2010 080065 prompt, Zwischenverkauf v Deutschland 29800 € 1 2040 mm 3 mm 2 mm 4.5 mm Motorisch 1.5 kW 1.1 kW 3060 mm 1650 mm 1500 mm 2730 kg 750 mm 140 mm 50 °/sek CNC control ECT (Schneider Magelis) - Input of bending angle, depth stop dimension, lifting height, folding, precut - max. 36 bending angles can be saved per set - max. 510 sets can be saved - comfortable 7.5" color touch TFT monitor - Power mode for material-friendly operation - Soft start of the bending beam and the depth stop - Visual user guidance in the event of faults (diagnosis center) - Selection of different languages ??such as German, English ... CNC back gauge - Back gauge range 6 - 750 mm - Drive via belt - 6 stop fingers - support plates with brushes Sectioned goose neck rail height 75 mm Additional 10 mm rail on the bening beam Flat rail R 1 mm Flat rail R 2 mm Mechanical drive via gear brake motor Upper beam drive via double eccentric Foot pedal Operating instructions in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility Blodpfjwiri Ajx Af Rjh • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: excellent (used), Year of construction: 2011, Swivel bending machine Make: Schröder model: SPB EVO 3200//4.0 DU used year of construction: 2011 useful length 3240 mm max. sheet thickness 4,0 mm lowering bending beam 200mm stroke upper beam 650 mm bending center adjustment 80 mm max. speed 100/100 mm up/down max. bending speed 90 Blsdpfxslnixio Af Roh max. bending speed DU 150 mm max. bending angle 150 Ø min. bending inner radius 1,5 x t, mm motor power upper beam 2x4,24 kW dimension: Lx6332 mm x W 2380 mm weight 12260 kg.