Used Mez Stroje S.r.o Elektrische Rotorpresse for sale (862)

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 160 kg, 100 kVA Seam Welding Machine for Sheet Metal Fabrication A powerful resistance seam welder for producing continuous, gas-tight welds on stainless and low-carbon steel sheets. Suitable for HVAC ductwork, tanks, containers, drums, and general sheet metal applications. Available in horizontal and vertical configurations; the welding speed is infinitely adjustable, and the water-cooled electrode system supports a 50% duty cycle in production use. Technical data: Rated capacity: 100 kVA Welding capacity, stainless steel: 1.0 + 1.0 mm Welding capacity, low-carbon steel: 1.2 + 1.2 mm Electrode arm length (throat depth): 400 mm Electrode stroke: 120 mm Welding speed: 0 – 2 m/min (continuously adjustable) Kodpfsymc Szjx Ah Aelw Duty cycle: 50% Cooling: water-cooled, flow rate 15 l/min Input voltage: 380 V, 50 Hz Dimensions (L × W × H): horizontal 1.3 × 0.7 × 1.9 m / vertical 1.3 × 0.8 × 1.9 m Weight: horizontal 500 kg / vertical 550 kg

Year of construction: 2025, operating hours: 1 h, condition: new, functionality: fully functional, nominal power: 5.5 kW (7.48 HP), pipe diameter (max.): 1,600 mm, rotational speed (distance/time): 36,000 mm/min, sheet thickness (max.): 2 mm, sheet thickness copper (max.): 1 mm, sheet thickness steel (max.): 1 mm, sheet thickness stainless steel (max.): 1 mm, Equipment: emergency stop, scorer, HVAC – Spiral duct forming machine (SPIRO) for sheet metal, length 120–8000 mm, strip width 137 mm, sheet thickness: galvanized 0.4–1.2 mm / stainless steel 0.4–0.8 mm / aluminium 0.5–1.5 mm / copper 0.5–1.2 mm, speed 1–36 m/min, PLC, cutting with saw blade (4 kW), main drive 5.5 kW. This machine is the heart of production: it feeds the strip and outputs spiral ducts at high speed. Spiro duct diameter 80–1600 mm. Includes spare guide rollers and strip bars for various duct diameters. More information available on our website. Pictured in transport configuration. Kedpfxoykpb Ro Ah Aslw

Condition: repair required (used), Year of construction: 2014, functionality: not functional, machine/vehicle number: OP-2013-019*002, total length: 2,730 mm, total height: 3,192 mm, overall weight: 3,100 kg, total width: 1,752 mm, This is a two-rotor, slow-speed shredder from the manufacturer Automatica s.r.o., equipped with a new electric motor and a Nord gearbox. Unfortunately, the machine has a rotor shaft defect, but it is repairable. It includes new stator and rotor blades. New electrical wiring, including a switchboard. Kjdpfxjzgf R Se Ah Aolw Control via PLC, see photo. The shredder is designed for shredding wood, plastic, cardboard, etc.

Condition: excellent (used), Year of construction: 2012, operating hours: 8,200 h, functionality: fully functional, repeat accuracy: 0.3 mm, table width: 2,200 mm, type of input current: three-phase, workpiece weight (max.): 6,000 kg, table length: 3,200 mm, milling spindle speed (max.): 12,000 rpm, ____RoboMill 2KR240 S20BT40 TT6t TB16 WM1 Collected Next Generation Robotic Stone Processing Complex “NO CONCRETE FOUNDATION REQUIRED” The robotic complex presented here is based on a KUKA KRC2 robot from 2012. The system can also be supplied with: - used KUKA KRC4 robots, - brand-new KUKA KRC4 robots, - next-generation KUKA KRC5 robots. Our company also offers larger robotic configurations based on the KUKA KR360 / KR500 platform, available in both used and new versions. Additional configurations are available with: - fully automatic spindle and wire-frame exchange systems, - additional milling spindles, - wire-saw frames of various widths, - additional technological heads, - rotary tables with payload capacities of: - 10 tons, - 20 tons, - 30 tons, - additional protective safety fencing systems. Introducing RoboMill — an adaptive multifunctional robotic system designed for: - milling, - contour cutting, - wire-saw processing, - stone slab machining. The key feature of the complex is its monobase construction, where all major system components are integrated into a single steel platform. The robot, rotary table, electrical communication, air and water lines, spindle cooling system, positioning systems, tool banks, and auxiliary mechanisms are all mounted on one rigid structure. This engineering approach provides several major advantages: - preservation of system geometry even after transportation - elimination of concrete foundations - rapid deployment at a new location - preservation of CAM-system mathematical accuracy without recalibration Installation requires only: - positioning the platform on the surface - drilling six anchor holes - fixing the structure using chemical anchors - connecting electrical power, compressed air, and water supply After that, the system is ready for operation. Klodpfszawm Hjx Ah Asw - Standard Configuration The complex is equipped with: - industrial KUKA robot - automatic 16-position BT40 tool bank - semi-automatic spindle and wire-frame exchange system - rotary table with payload capacity up to 6 tons - 3200 × 2200 mm slab-cutting platform for disk machining - integrated spindle cooling system - internal routing of electrical, pneumatic, and water communication ____Robot System Functions The robot memory contains: - semi-automatic spindle and wire-frame exchange programs - all 16 spatial tool pickup and return programs - external kinematic models of the rotary table - auxiliary positioning and safe-transition programs Because all components are rigidly fixed to a single monobase structure, the center distances between the robot, table, and technological modules remain unchanged even after transportation. This allows the CAM mathematical model to remain fully valid while minimizing setup and recalibration time after installation. ___RoboMill is not just a robot. It is a mobile industrial platform for modern automated stone processing.

Condition: excellent (used), functionality: fully functional, Electric motor 90 KW - 1480 rpm Kodpfsucwu Tox Ah Aslw 380 Volt. Gated motor.

Condition: used, Year of construction: 1989, functionality: fully functional, Available in 3 versions: 1 Electric pallet table -Capacity: 1000kg -Lifting height: 77cm -380v 2 Electric pallet table -Capacity: 500kg -Lifting height: 77cm -380 V Kljdpevwkwiefx Ah Aow 3 -Electric pallet table -Capacity 1000kg -Lifting height 77cm -230V

Condition: new, fuel type: electric, color: white, Year of construction: 2021, Year of manufacture: 2021 Model year: 2021 Klsdpfx Ahouu A Tyj Ajw Usable material: Concrete CE marking: yes Damages: none Price: On request

Condition: new, Year of construction: 2026, PROD-MASZ 2.2 m Electric Sheet Metal Bending Machine for 2 mm Aluminum Sheets ✨ For Sale: Electric sheet metal bending machine from the renowned company PROD-MASZ. Specifications: ✅ Working Length: 2.2 m ✅ Maximum Sheet Thickness: 2.0 mm (Aluminum) ✅ Bending Angle: 15° ✅ Bending Beam: 18 mm ✅ Drive: Electric – simple and convenient operation ✅ Solid and durable construction for precise bending ✅ Machine is fully functional and ready for immediate use ✅ New, from current production ✅ 3-Phase Control 360V ✨ Ideal for sheet metal fabrication shops, roofing companies, and sheet metal processing. ✨ Professional, reliable, and industry-recognized equipment. ✨ Thanks to the electric drive, work becomes significantly easier and faster, leading to greater efficiency and time savings. ✨ Additional equipment: ✅ Roller shear 0.8mm - €350 ✅ Roller shear 1.2mm - €500 Kljdscv S A Espfx Ah Aow ✅ Hand folding machine €75 ✅ Magnetic setting aid up to 36cm (2 pcs) €75 ✅ Magnetic setting aid up to 65cm (2 pieces): €150 ✅ Rotary finger stop 65cm: additional €1250 ✨ Machine is available ✨ Delivery possible every Monday/Tuesday ✨ Delivery costs: € please ask We look forward to hearing from you! -> We issue invoices

Condition: new, Year of construction: 2026, More time saved! More convenience! The RED-3200/1.0/155* electric swing bending machine is ideal for thin sheet metal processing up to 1.00 mm steel sheet, recurring one-off productions, and small-batch manufacturing. The upper beam and bending beam are motorized. The RED-3200/1.0/150* motorized swing bending machine has a working length of 3200 mm and bends steel sheets up to a maximum thickness of 1.00 mm. Prod-Masz's electric sheet metal bending machines now feature an electric pressure lifting device. This is a fully electric sheet metal bending machine. ✔️ Maximum working length: 3200 mm ✔️ Bending capacity: up to 1.0 mm (steel sheet) ✔️ Titanium-zinc sheet: 1.0 mm, aluminum sheet: 1.2 mm, copper sheet: 1.2 mm ✔️ Bending angle of the bending machine: max. 150 degrees ✔️ Bending jaw thickness: 18 mm ✔️ Cutting with the roller shear across the entire working width ✔️ Lifting of the upper beam in three positions ✔️ Upper jaw stroke: 80 mm ✨ Seize this unique opportunity and upgrade your workshop with the best press brake on the market! Trust the manufacturer that has been an industry leader in metalworking for years. -> Rotary shear (max. cutting capacity 1.2 mm / steel) plus €500 -> crusher/ welt press plus €75 Delivery costs: € please ask Additional equipment: Ksdpfx Ahjcri E Ne Aelw - Rotating finger guide 65cm plus €1250 - Measuring gauge 36cm (2 pcs.) €75 - Measuring gauge 65cm (2 pcs.) €150 Delivery date: every Monday/Tuesday Cash on delivery or prepayment We look forward to hearing from you! - We issue invoices

Condition: used, functionality: fully functional, - Manufacturer: MEZ Frenštát p. Radh. - Type: F200 - Motor power: 30 kW - Single-shaft design - Max. height of processed material: 120 mm - Min. length of processed material: 2 m Kledoxa Evzopfx Ah Aew

Condition: used, Elektrische Exzenterpresse / Electric Eccentric Press Komex Eccentric Die Cutting Machine Kedpfx Ahoyt H Ndo Aslw Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Elektrischer Eckenrunder / Electric Corner Rounder Pescha Round Corner Machine Klsdjyzi Iaepfx Ah Aow Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Elektrischer Hochhubwagen / Eletric Pallet Truck BT LWE200 Baujahr / Year 2010  - Serial-No. 6117163 Tragkraft / forklift lifting capacity max. 2000kg Betriebsstunden / Working Hours 2337 Hubhöhe / Lifting high max. 205mm Kedpoxp H E Njfx Ah Aslw Mit Ladegerät / with Charger Gabellänge / Fork Length 1150mm Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Elektrischer Hochhubwagen / Eletric Forklift Linde L 12 Baujahr / Year 2001 - Serial-No. W4 X379 M 03408 Tragkraft / forklift lifting capacity max. 1200kg Hubhöhe / Lifting high max. 3324mm Mit Ladegerät / with Charger Klsdpfx Ahoxp H E As Ajw Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: new, Year of construction: 2017, * Unladen weight: 1,526 kg * Load capacity: 230 kg * Vehicle length: 1,780 mm * Vehicle width: 760 mm * Working height: 7,800 mm * Platform height: 5,800 mm * Platform length retracted/extended: 1,780 mm / 2,680 mm * Ground clearance (center): 70 mm * Engine power: 3.3 kW * Travel speed: 3.20 km/h * Travel speed when extended: 0.8 km/h * Turning radius (inside/outside): 0.04 m / 1.49 m * Overall height: 1,830 mm * Tire type: SE * Tire size front and rear: 305 x 115 * Aerial work platform, suitable for 2 persons * Year of manufacture: 2017 -----Vehicle number: 4404 Errors and prior sale excepted Kledpfx Ast Hpvfsh Asw WhatsApp support available! If you have questions about the vehicle or need further information, feel free to contact us conveniently via WhatsApp. WhatsApp WhatsApp

Condition: ready for operation (used), Siemens 6FC5211-0AA00 -0AA0 electrical module for CNC NCU terminal block for 8 DMP compact modules Version: A SN:T-K22030154, used, normal signs of wear, 100% fully functional, scope of delivery as shown in the photos Kljdjx Dxazjpfx Ah Asw

Condition: new, functionality: fully functional, machine/vehicle number: NEW-5, empty load weight: 734 kg, maximum load weight: 2,766 kg, overall weight: 3,500 kg, axle configuration: 2 axles, loading space length: 3,060 mm, loading space width: 1,840 mm, loading space height: 300 mm, suspension: other, tire size: 195 / 50 R 13, maximum speed: 100 km/h, color: silver, trailer brake: trailer braked, Year of construction: 2026, brakes: other, SARIS K1 306 184 3500 2E Rear Tipper NEW VEHICLE Internal dimensions: 306cm x 184cm Side board height: 30cm Load bed height: 68cm Total weight: 3500Kg Payload: 2746Kg braked tandem axle trailer Overrun brake and parking brake by AL-KO largest possible axle and brake low chassis fully welded, hot-dip galvanized steel frame aluminum profile sideboards with tensioning latch can be folded down and removed on all sides 15mm thick, non-slip, and robust screen-printed wood floor additional steel plate on the wood floor automatic support wheel with 400Kg support load 8 noise-reducing lashing eyes with 800Kg tensile force reinforced 13" inch C tires with steel valve M+S tires net/rope hook on the frame 13-pin connector LED side marker lights at the front lights at the rear with reversing light and triangular reflectors upper frame mounted on rubber large tilting angle of 51 degrees backwards electric tipping operation with connector for charging the 12V battery OPTIONAL ACCESSORIES PERMANENTLY REDUCED IN PRICE FROM FEBRUARY 2026 -Equipment for 100km/h (shock absorbers) -Spare wheel with holder -without sideboards (price reduction) -Sideboard height increase to 35cm -Black Edition (powder-coated sideboards and rims in black) -integrated ramps 2800Kg -Charger -Remote control -Bluetooth remote control -Emergency hand pump -Safety support for maintenance work on a tilted vehicle -Folding crank for rear supports -complete LED lighting -Theft protection -net, fine or coarse mesh -H-frame -leaf grid in various heights, also closed -extension sideboards 30cm with tensioning latch -flat cover with or without bow -high cover 160cm - 200cm further accessories on request! Kljdpfx Aeghpc Neh Asw plus. freight to Gera and vehicle registration document 250 € net Pictures are for example purposes and may show optional accessories that incur extra costs. Haven't found the right trailer yet? We have 50-100 vehicles permanently in stock and ready for immediate pickup. The workshop is open on weekdays from 8:00 a.m. to 5:00 p.m. for all kinds of repairs. Specialist in axle repair, also for caravans. In addition, we have a large selection of spare parts and accessories, also for trailers from various manufacturers. With us, you will also find a variety of rental trailers. Visit us online or come by directly!

Condition: used, lifting height: 3,000 mm, fuel type: electric, mast type: duplex, battery voltage: 48 V, fork length: 1,000 mm, Empty weight: 2.848 kg Lifting capacity: 1.000 kg Maximum passing height: 210 cm Supply voltage: 380 V CE mark: yes General condition: average Technical condition: average Klsdpfxoyu T Nas Ah Asw Visual appearance: average Please contact Bas Sindorf for more information

Condition: new, Year of construction: 2026, working width: 4,200 mm, bending angle (max.): 150 °, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 1 mm, total length: 4,500 mm, Hey professionals, we know that you are always looking for the best and most powerful tool. That's why we have the ultimate solution for you: the Prod-Masz electric bending machine RED-4200/0.8/160* with recess! With our bending machine, which is equipped with an advanced electronic control system, precision and ease of use become standard. Now, a push of a button starts the bending process and guarantees flawless results without unnecessary effort. Magnets attached to the bending beam ensure a stable position of the sheet and enable precise dimensional adjustment, which is the key to perfect shapes. In addition, the machine offers a three-stage height adjustment of the upper beam and a number of necessary accessories, including a protractor, an angle limiter, a rear table for supporting the sheet -> quick adjustment with a handwheel. ✔️ Maximum working length: 4200 mm ✔️ Bending capacity: up to 0.8 mm (steel sheet) Kledpfxjbnq U Te Ah Aew ✔️ Titanium-zinc sheet: 0.8 mm, aluminum sheet: 1.2 mm, copper sheet: 1.25 mm ✔️ Bending angle of the bending machine: max. 160 degrees ✔️ Bending beam thickness: 18 mm ✔️ Cutting with the roller shears across the entire working width ✔️ Raising the upper beam in three positions ✔️ Upper beam stroke: 80 mm Seize this unique opportunity and improve your workshop with the best folding machine on the market! Trust the manufacturer who has been the industry leader in metalworking for years. -> The roller shears (max. cutting capacity 0.8 mm / steel) plus 350 euros -> a hand folding machine plus 75 euros Additional equipment: - Stop with scale - Quick adjustment via hand crank plus 1250 euros Delivery date: every week Monday/Tuesday We look forward to hearing from you! -> We issue invoices

Condition: new, Year of construction: 2026, functionality: fully functional, shaft length: 1,070 mm, input voltage: 230 V, type of input current: AC, laser power: 20 W, type of cooling: air, total width: 920 mm, total height: 940 mm, total length: 1,760 mm, door opening width: 670 mm, door opening height: 500 mm, scan area length: 175 mm, scan area width: 175 mm, travel distance Z-axis: 400 mm, table height: 710 mm, table length: 710 mm, table width: 400 mm, space requirement width: 920 mm, space requirement height: 940 mm, laser wavelength: 1,070 nm, space requirement length: 1,760 mm, ambient temperature (min.): 15 °C, ambient temperature (max.): 35 °C, input frequency: 50 Hz, extraction nozzle diameter: 50 mm, working width: 175 mm, Equipment: cabin, Fiber Laser System for Professional Marking and Engraving of Metals and Plastics. Equipped with SK-LASER Workstation, Laser Class 1, and automatic lifting door. Laser Class 1 · CE · Made in Germany System & Lifting Door: - Complete system: IPG fiber laser + workstation + electric lifting door Process Sequence: - Start → Door closes → Laser process → Door opens automatically - Door opening approx. H 500 × W 670 mm - Access protection via safety control Laser – IPG (Made in Germany): - Power: 20 W - Pulse energy: 1.0 mJ - Pulse duration: 100 ns - Frequency: 20–80 kHz - Wavelength: 1060–1070 nm - Beam quality M² < 1.2 - Air-cooled, < 400 W Optics & Scanner: - F-Theta lens f = 254 mm - Marking field 175 × 175 mm - Pilot laser + 2 distance lasers - Manually adjustable laser head (Y-axis) Control: - Windows 11 Pro, SSD, 23" monitor - Interfaces: Ethernet / USB / RS232 - SK CONTROL: texts, logos, QR codes, variable data, parameter management Workstation 1 – Laser Class 1: - Seated/standing workstation, aluminum housing - Work surface 710 × 400 mm, 25 mm hole grid - Dimensions 1760 × 920 × 940 mm Motorized Z-Axis (400 mm) - Extraction port DN50 - Safety (PL4) - Emergency stop - 2-channel interlock Safety relay - Rear service door (when open: Laser Class 4) Operation: 230 V / 50 Hz 15–35 °C Condition: - New machine Kjdpfxoyimpaj Ah Aslw - CE · Made in Germany

Condition: new, Year of construction: 2025, bending angle (max.): 150 °, sheet thickness steel (max.): 1 mm, sheet thickness copper (max.): 1 mm, ❗❗ Electric sheet metal bending machine RED-3200/1.0/150* with recess ❗❗ Discover a new era in metalworking with our revolutionary sheet metal bending machine that harmoniously combines craftsmanship heritage with the latest technological developments. We present a machine that not only meets but exceeds your wildest expectations. Don't miss the chance to equip your workshop with a groundbreaking tool that eliminates the traditional difficulties of manual bending and offers unprecedented comfort and efficiency. Bending machine / bending machine / roofing machine Polish manufacturer PROD-MASZ / brand new directly from the manufacturer With our bending machine, equipped with an advanced electronic control system, precision and ease of use become standard. Now one push of a button starts the bending process and guarantees flawless results without unnecessary effort. Kljdpfecv R Dkex Ah Ajw Magnets attached to the bending beam ensure a stable position of the sheet metal and enable precise dimensional adjustment, which is the key to perfect shapes. The RED 3200/1.0 mm/150* offers an impressive maximum working width of 3,200 mm and the ability to bend steel sheets up to 1.0 mm thick, with non-ferrous metals achieving an additional 30% capacity. The maximum bending angle of 150 degrees and the ability to cut sheets across the entire working width push the boundaries of precision and efficiency. In addition, the machine offers a three-stage height adjustment of the upper beam and a number of necessary accessories, including a protractor, an angle limiter, a rear table for supporting the sheet -> quick adjustment with a handwheel. We look forward to hearing from you! -> We issue invoices

Condition: new, pressure: 150bending length: 3050column width: 3050daylight: 590stroke lenght (max.): 300messurements (LxWxH): 4740x2000x2680weight approx.: 9500motor power: 22CNC crowning system by control: jaCNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Klsdpfed Etf Eox Ah Aow

Condition: new, pressure: 20bending length: 900column width: 900daylight: 325stroke lenght (max.): 150messurements (LxWxH): 1760 x 1280 x 2190 mmweight approx.: 1950motor power: 3,8 Kedpsd H Hh Dofx Ah Aslw

Condition: new, pressure: 80bending length: 2550column width: 2550daylight: 590stroke lenght (max.): 300messurements (LxWxH): 3680x1960x2500weight approx.: 6100motor power: 11CNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Kljdod Etfwspfx Ah Asw

Condition: new, pressure: 40bending length: 1300column width: 1300daylight: 375stroke lenght (max.): 150messurements (LxWxH): 1880 x 2435 x 2320 mmweight approx.: 3400motor power: 2 x 3,8 Kedpfx Aed H Hh Hjh Ajlw