Used Mhs Professional for sale (6,228)

Condition: used, Year of construction: 2007, Professional combined painting and drying system with partition wall from Sehon, featuring a large cabin capacity and PLC control. Manufacturer: Sehon Innovative Painting Systems and Technology Model: SE-Professional Futura Year of manufacture: 2007 System type: Combined painting and drying system Cabin internal dimensions: 14,000 x 5,000 x 4,400 mm Cabin external height: approx. 4,900 mm Inlet/outlet gates: 2 units, front and rear Gate opening: 4,000 mm high x 4,500 mm wide Gate construction: insulated steel sandwich panel Gate panel thickness: 54 mm Housing: mineral wool-insulated steel cassettes Cassette thickness: 50 mm Housing color: RAL 9010 Pure White Material: chromated steel sheet Control: Siemens C7 PLC control Operation: Soft-touch panel with touch display Operating modes: Painting, drying, manual operation, timer operation Temperature control: stepless, microprocessor-controlled Filter monitoring: ceiling filter, pre-filter, paint separation mat Operating hour counter: integrated Alarm messages: visual and audible Pressure control: semi-automatic Supply air motor power: 7.5 kW Exhaust air motor power: 7.5 kW Motor power supply: 4 x 400 Volt Total connected load: approx. 37 kW Supply air unit: high-pressure radial fan Exhaust air unit: high-pressure radial fan Airflow rate control: adjustable motor slide Filter system: pocket filters on sliding rails Pre-filter efficiency class: EU3 Fresh air duct: galvanized steel sheet Exhaust air duct: galvanized steel sheet Fresh air duct height: approx. 6 m above floor level Exhaust air duct height: approx. 10 m above floor level Dsdjy Tiaaspfx Akhewa Solvent pipe: available Hot air generator: indirect oil or gas firing Combustion chamber material: chromium steel V4A Combustion chamber material numbers: 1.4828 / 1.4541 Burner system: 4-pass system Oil burner: Elco-Klöckner Vectron L04.480 Duo Oil burner power range: 110 - 350 kW Gas burner: Elco-Klöckner EK04.34 G-ZVT1+QS Gas burner power range: 90 - 330 kW Gas burner design: Low-NOx with Quick-Start Type QS93 Solenoid valve: 1/2 inch Safety functions: safety and after-run thermostat Cabin construction: heat and sound insulated Condition: used Further painting equipment available upon request. System currently still in operation, available from June 2026.

Condition: as good as new (ex-display), functionality: fully functional, power: 4 kW (5.44 HP), input voltage: 400 V, cutting height (max.): 102 mm, cutting width (max.): 800 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, actuation type: manual, Equipment: scorer, Demonstration machine with few operating hours, equipped with 5 special features; 5.5 kW, pre-ripper with its own motor, fine-adjustable circular saw fence, cutting width 800 mm with full table length, angle grid on the outrigger frame... Dedpfezi Dcljx Akhswa Format sliding table, cutting length 2050 mm. Recommended retail price: 7,423,- EUR, plus VAT. Save 2,223 EUR!

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blaster with a 100-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the built-in pressure regulator. A water separator is also permanently installed on the blaster, which separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off system ensures safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. The pressure blaster is delivered fully operational, assembled in a space-saving mesh box. All that's required is to connect the compressed air supply and fill it with blasting media. It can be easily transported by forklift or pallet truck. A lockable aluminum box is installed for storage of protective clothing, spare parts, etc. The scope of delivery includes: SAPI "Mammut 100 L" pressure blaster 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off device Abrasive sieve Cover 10 m blast hose, fully assembled, ø 25x7 mm Silicon carbide Venturi long nozzle, diameter optionally 6 mm, 8 mm, or 10 mm RED 2 sandblasting helmet Nylon/cotton sandblasting overalls 1 pair of leather blasting gloves 10 m breathing air hose, fully assembled SAF breathing air filter/activated carbon filter Wearing parts set consisting of: 100 tear-off films for RED 2 10 inner discs for RED 2 1 blast hose coupling, 25x7 mm nylon 2 rubber seals for blast hose coupling 1 nozzle holder, 25x7 mm Grid box with blast hose holder Aluminum box Lockable Technical specifications of the pressure blaster: Precisely adjustable from 0.1 - 12 bar TÜV-certified with certificate Fixed 1" internal and external piping Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Dwsdpfx Ajwc Ri Ijkhsa Abrasive dosing valve (suitable for all common blasting media) Capacity: 100 l Total height: 1,130 mm Bowl diameter: 490 mm Total diameter: 900 mm Weight: approx. 75 kg Dimensions of the mesh box: Length: 1,460 mm Width: 840 mm Height: 1,400 mm Total weight including all accessories: 260 kg

Condition: new, Year of construction: 2025, INJECTOR Sandblasting Cabinets The Benefits and Applications of Injector Sandblasting Cabinets Injector sandblasting cabinets use an air-driven venturi system to create a vacuum that draws abrasive media into the airstream. The abrasive media is then propelled at high velocity from the blast nozzle, where it impacts the surface to be cleaned or prepared. Injector sandblasting is typically used for lighter applications. Our SAPI injector sandblasting cabinets—including the Elk, Ram, and Buffalo models—use an air-driven vacuum system that draws the media to the front of the nozzle, where it meets the airstream and then "shoots" the mixture onto the workpiece. These cabinets are ideal for lighter applications and offer efficient and cost-effective solutions. ----- The Widder 70/100 injector sandblasting cabinet is a robust and reliable solution for demanding surface preparation requirements. Featuring a large work surface, a right-hand side door, and an efficient dust control system, this cabinet is designed for use with various types of abrasives and can accommodate small to medium-sized parts. It is ideal for industrial applications such as metal fabrication shops and workshops. ----- Dwedpswf Dwwefx Akhoa The Elch 100/130 injector sandblasting cabinet from SAPI is a compact and versatile solution for medium to large parts. Equipped with a large viewing window, two side doors, and an efficient filtration system, this cabinet allows for easy monitoring of the blasting process and ensures a clean and safe working environment. The Elch is designed for use with a wide variety of abrasives. Its user-friendly design and efficient blasting process make it an ideal choice for lighter applications in industries such as automotive, aerospace, and manufacturing. ----- The Büffel 140/180 injector sandblasting cabinet is a robust blasting machine designed for demanding applications. It features an air-driven venturi system that draws abrasive into the airstream and expels it at high speed from the blast nozzle. The Büffel cabinet is also available with an integrated filtration system that helps reduce dust and improve air quality during the sandblasting process. Loading heavy parts is also easily possible thanks to the front door using a forklift or crane. With its robust construction and efficient blasting performance, the Büffel 140/180 injector sandblasting cabinet is an ideal choice for industrial applications requiring high throughput and minimal downtime.

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Djdpswc Rk Ejfx Akhjwa Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: Djdpjwc Afhefx Akhowa SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: used, Just Normlicht Color-Control Professional ist ein Farbprüftisch für ein präzises Farbmanagement-System. Just Normlicht Color-Control Professional is a color testing table for a precise color management system. Farbprüftisch / Ink Proof Table Just Normlicht Color-Control Professional  Dwedpfx Akjyuzf Ashoa Tischabmessungen / Table Sizes 940 x 680mm 5 Schubladen L/B/H 90 x 70 x 12cm / 5 drawers W/L/H 90 x 70 x 12cm Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Die Palettenwaage von SOEHNE Professional S20-2761 kann von 4kg bis 1500kg wiegen. The SOEHNE Professional S20-2761 pallet scale can weigh from 4kg to 1500kg. Dedjxbn Aaspfx Akhjwa Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, Year of construction: 2015, functionality: fully functional, power: 38 kW (51.67 HP), • Year of manufacture: 2015 • Max. trunk diameter: 1.5 m • Automatic, hydraulic belt tensioning • Automatic pre-cutter • Automatic board guiding system • Max. trunk length: 8 m • 8 hydraulic clamps • 3 trunk turning devices with left-right positioning • Automatic control • Automatic lifting belt conveyor for boards • Dust extraction system • 38 kW motor Price: 40,000 euros Dwjdpfjzl Stwox Akhea

Condition: used, Year of construction: 2017, Used Yaskawa industrial robot, model MH-50-35, in good condition, with DX100 controller. Dedpfszia Hgsx Akhewa

Condition: used, Year of construction: 2018, Used Yaskawa industrial robot, model MH-24, in good condition, with DX100 controller. Djdpfxjzia Ecj Akhswa

Condition: used, Year of construction: 2019, Used Yaskawa industrial robot MH-50 in good condition, including DX100 controller. Dsdpfxjziaz Do Akhswa

Condition: used, MIG/MAG hose package, MIG/MAG welding torch -MIG/MAG hose package: Holch MHS 501-Super water-cooled Dwjdpfxsuahx Dj Akhea -Length: 6.35 m -Weight: 5.1 kg

Condition: new, Year of construction: 2024, New Electrolux washing machines and tumble dryers. Models available: - TD6-6 professional tumble dryers, dimensions: 600x730x850 mm. 230V, 2023, 3 units in stock. - TE 1120 washing machine, 3 units in stock, dimensions: 600x630x850 mm, 230V, 2024. - WE170V washing machine, dimensions: 600x630x850 mm. Dedpfxjzg H D He Akhowa - WE1100P washing machine, dimensions: 690x770x1100 mm.

Condition: excellent (used), Price per unit. For sale: a professional glue roller / glue applicator from Tünkers GmbH, designed for precise application of glue onto paper, cardboard, corrugated board, leather, fabrics, and other flat materials. This device is suitable for bookbinding shops, printing houses, production facilities, and anywhere where uniform glue distribution is required. The machine is equipped with a system of working rollers ensuring even glue application and adjustment of the amount of material dispensed. The robust, cast iron construction guarantees high durability and stable operation for many years. Technical specifications: Manufacturer: Tünkers GmbH Type: Glue roller / glue applicator Machine number: 12/30274/22 Electric drive Rotation direction switch (left / stop / right) Adjustment of the amount of glue applied Two dispensing rollers Metal glue tank Adjustable work table Robust cast iron construction Made in Germany This device is ideal for working with glues used in bookbinding and packaging production. The visual condition corresponds to the photos. Dodpeziwunjfx Akhowa

Condition: good (used), Year of construction: 2001, For sale is a Felder KF-700 SP circular saw/milling machine with a cutting length of 3200 mm. The machine has been inspected and refurbished by our service team and is in good condition. Technical data: - Cutting length 3200 mm - Cutting width 850 mm - Cutting height 103 mm - Max. saw blade diameter 315 mm - 4 milling speeds - Direction of rotation switch - 3 motors, each with 3 kW / 4.1 hp - Year of manufacture 2001 Dwodpfx Ajzichyskhsa The machine is located in A-5431 Kuchl and can be inspected at any time during our opening hours. Subject to prior sale! Related terms: circular saw, milling machine, combined machine Reference: R-B17MP

Condition: excellent (used), - Type: REBDC Dsdpfx Ajwyb Tfekhjwa - Power: Electric - 5 Rotating Arms - Voltage: 220 V - Power Output: 11 kW - Serial Number: FEG03170007 - Structure: Stainless steel, with tempered glass panels - Electronic controls: On the left side - Lower part: Warming display for keeping food hot

Condition: used, -Dimensions: 800x875x1400mm -Serial No.: 3215621 -Refrigerant Gas: 22R -Water-cooled compressor -Maximum gas pressure: 2000 KPa -Absorption resistance: 2.55 kW -Maximum motor power: 1.90 kW -Protection: IP22 -Class: N -Minimum/Maximum water pressure: 200 (2atm) - 400 (4atm) Min.KPa -Voltage: 380V -Power: 5.60 kW -Weight: 252kg Djdpjxyh Igofx Akhjwa Used Bravo Trittico 305 Professional Ice Cream Machine: Unleash Your Creative Craft The used Bravo Trittico 305 Professional Ice Cream Machine is much more than a simple ice cream maker. It is a true tool for creative artisans, enabling you to produce a wide range of sweet treats—from smooth custards and refreshing sorbets to rich chocolate ganaches. This versatile machine is engineered to handle all your patisserie and frozen dessert needs. -The Trittico Exécutive Evo is the ultimate multifunctional machine, bringing together high-end craftsmanship and advanced technology. -The workshop you’ve always dreamed of, contained in less than one square meter! The Trittico® Exécutive Evo embodies the art of artisan gelato, fine pastry, international gastronomy, and chocolate-making. It is equipped with an electronic control system that automatically manages numerous standard programs and allows for full customization according to each artisan’s needs. An indispensable collaborator: precise, reliable, tireless, and consistent! FEATURES: -Ionic System® evaluates the texture and volume of ice cream by detecting—the amount of crystallized water in the mixture, thanks to sensors positioned in the freezing cylinder. -Dual inverter for the upper tank and multi-speed agitator -Option to work with the Ionic System®: software-controlled speed guarantees the best results for ice cream and sorbet, as well as optimal mixing for pastry products. -Option to operate with adjustable extraction temperature -Multiple recipes for gelato, chocolate, and pastries Outstanding Versatility

Condition: used, functionality: fully functional, CNC Machining Center MAHO MH 600 C – working, under power For sale CNC machining center MAHO MH 600 C, manufactured by MAHO AG (Germany). The machine was used in production and was operating until recently. It is fully functional and can be demonstrated under power. Control system: Grundig / Philips CNC 532 Serial number: 661999 Equipment: • Philips / Grundig CNC 532 control • automatic tool magazine (30 positions) • rotary table (4th axis) • coolant system • full machine enclosure Technical data: • X travel: 600 mm • Y travel: 450 mm • Z travel: 450 mm • spindle taper: SK40 • spindle speed: up to approx. 6300 rpm • tool magazine: 30 positions • machine weight: approx. 3.6 t Condition: • fully operational • used in production until decommission • available for inspection under power Technical Condition Information The machine is currently still in occasional use in our production facility and remains operational. However, we believe in complete transparency and would like to point out that the CNC control software occasionally freezes. Therefore, the machine should be considered as potentially requiring troubleshooting or repairs. Dodpfx Aozgcifjkhowa For this reason, we believe it is best suited for buyers with experience in servicing CNC machine tools, maintenance companies, or businesses looking for a valuable source of spare parts. This technical condition is also reflected in the attractive asking price. The machine is sold as is, in its current condition. We strongly encourage all interested buyers to inspect the machine personally and see it operating in our facility before making a purchase. We will be happy to demonstrate its operation and answer any questions. The machine is being sold not because it has reached the end of its useful life, but because we are upgrading our production equipment and purchasing a new machining center.

Condition: excellent (used), For sale: Professional setting device for internal micrometers SUBITO – Schwenk ESU. Very good condition, complete set in original wooden case with manual. • Model: SUBITO Einstellgerät ESU • Manufacturer: Oskar Schwenk GmbH, Germany • Complete equipment • Stable cast iron base • Precise adjustment and micrometric feed • Ideal for setting SUBITO, ESS, ESU internal micrometers • The whole set is in as-new condition Djdpfxsx A Ia Io Akhjwa

Condition: used, Year of construction: 1985, For sale: MAHO MH 1000C milling machine Dedpfxjzgu Iys Akhswa Factory number 11429 BKW GmbH, model S.05ES Year of manufacture: 1985 18 bar; Volume: 1.6 m3/h; 3000 1/min; kW 0.36; 50/60 Hz; V 190-240; A 2.85; Net price: 700 EUR.

Condition: used, functionality: fully functional, Year of construction: 2022, operating hours: 10 h, load capacity: 1,500 kg, lifting height: 115 mm, fuel type: electric, fork length: 1,150 mm, drive type: Elektro, Low lift pallet truck Mast type: None Technical condition: very good Front tyres type: Solid rubber (bandages) Front tyres size: 210x70 Rear tyres type: Solid rubber (bandages) Rear tyres size: 78x60 Dedpfx Aeymt Dzokhowa Battery voltage: 12V Battery capacity: 85Ah Description: new UVV inspection & maintenance, new batteries

Condition: used, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 06/2015, Year of construction: 2015, Equipment: ABS, Equipment: Air suspension Dwodpfoy N Rrcsx Akhsa Safety: ABS

Year of construction: 2021, condition: new, Approx. 9 professional espresso machines, LaMacatec, Capri II Black – New: Price ex works: only €1,500 (net)! Manufacturer: LaMacatec Type: Capri II Black Art. No.: LM 721 black Year of manufacture: 2021 – but still in original packaging! Groups: 2 Power: 3050 watts, 230V Boiler water: 11.5 liters Dimensions (W x H x D): 66 x 48 x 54 cm Steam: 1 Hot water: 1 Weight: 48 kg Automatic coffee dispensing via volume programming Steel body Low drip tray for “coffee-to-go” Stainless steel steam and water wand, thermosiphon system water circuit Copper boiler (Cu 99.5) with anti-oxidation treatment Former new price in 2021: €3,400, current price: €4,119 Condition: New, in original packaging Dwedpfx Ajzbyhcekhja Available: immediately Location: 88448 Attenweiler

Condition: used, Used Brogli model MH-5 stainless steel vacuum process vessel. - Manufacturer: Brogli - Model: MH-5 Dwedpfx Ajzbuibjkhoa Vessel: - Total capacity of vessel: 6,8 litre - Working capacity of vessel: 5 litre - Vessel rated: -1/0,5 bar - Jacket rated: 1 bar Mixing system "Multi-homo": - (1) anchor agitator with scrappers - (1) ribbon agitator - (1) homogenizer system Includes: - control panel - heating unit - lowering/raising the vessel using a hand-operated wheel Specifications: Vacuum (Y/N): Y Capacity: 5 Material Of Construction: AISI 304 Jacket (Y/N): Y