Used Microstep Mg 6001 20Prb + Ch800P+Hyperterm Hpr260 for sale (1,042)

Condition: excellent (used), Year of construction: 2001, sheet width 3100 mm plate thickness 6.0 mm ST pre-bending 4.0 mm ST diameter of upper rolls 200 mm side roll diameter 165 mm diameter of lower rolls 190 mm bending speed ca. 5.0 m/min Control DIGI oil volume 80.0 Liter voltage 380 V total power requirement 6.0 kW weight 6000 kg range L-W-H 5250 x 1500 x 1400 mm very good condition (!!) Current new price approx. 80,000 euros Special price on request Features: - Robust electro-hydraulic 4-roll bending machine * 4-roll concept offers a wide range of bending and rounding options - MG swivel control panel * Operation - control of all rolls and machine axes * Digital position display * Manual operation via joysticks - Two central rolls are driven directly by hydraulic motors - Conical rolling possible via inclined position of the rolls - Parallelism of the side rollers via torsion shafts - Bending on both sides - Diameters of up to 1.1 times the upper roller diameter are possible - Forged and hardened rollers with a strength of 53-55 HRC Rjdpjx Sr Dfofx Ankocd - Low-maintenance, stable machine concept - Permanent lubrication of all bearings - Stable steel welded construction - Electro-hydraulic folding bearing for easy pipe removal - Pressure gauge/pressure display for the rollers - Safety device (safety line with switch unit) - Operating instructions (PDF)

Condition: good (used), MicroStep SPL-PA plasma cutting system with extraction and compressor technology Manufacturer: MicroStep Group Model: SPL-PA 4501.15+S50 Current requirement: 120 A Machine type: CNC plasma cutting system CNC control: iMSNC Design: Portal design with linear guides Extraction system: Donaldson Torit DCE Electrical connection for extraction system: 400 volts Motor power of extraction system: 7.5 kW Compressed air generation: Screw compressor Compressor manufacturer: Kaeser Compressor model: TA 8 CE marking: present Location: Waltenhofen, Germany Redeyvd Uiepfx Ankocd Dismantling and loading by the seller included.

Condition: good (used), functionality: fully functional, Year of construction: 2002, control type: manual, degree of automation: manual, actuation type: hydraulic, pipe diameter (max.): 6,090,115 mm, tube wall thickness (max.): 3 mm, number of axes: 3, working height: 700 mm, input voltage: 380 V, input frequency: 50 Hz, type of input current: three-phase, operating pressure: 200 bar, pressure (max.): 200 bar, number of digital displays: 3, Equipment: CE marking, documentation/manual, emergency stop, quick-change device, Limpet coil roller hydraulic to form half round pipe from flat stainless steel strip and bending into wanted radius with spiral continuous. -Shafts output 80 mm -Interchangeable set of rollers on the shafts for the different size of pipe 60 mm , 90 mm , 115 mm -Coil holder for the reel metal strip with guide-way bench uncoiling and alignment the steel strip to the rolling machine -Pinching lower central roll adjustable to form the half pipe -Digital position readout to determine the bending diameter of the coil, the pitch of the coil, the half tube shape forming -hydraulic arm movable in 3 directions to set the pitch of the coil roll -Upper vertical support hydraulic operated to hold in position the formed diameter and collect the coils from diameter 700 to diameter 3000 mm -Operator console electric with push buttons and digital position readouts for the coil length, the bending radius and the forming load. -Service manuals and operation books along with the machine Rcedpfjyik Hcjx Anksd

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, machine/vehicle number: 3roll 3500x140 mm prepinch, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: MG, controller model: MG, number of rollers: 3, roller (bottom) diameter: 880 mm, roller (top) diameter: 950 mm, side roll diameter: 880 mm, roller length: 3,550 mm, working width: 3,500 mm, working height: 3,950 mm, sheet thickness (max.): 140 mm, sheet thickness steel (max.): 175 mm, overall weight: 200,000 kg, total length: 8,800 mm, total width: 5,100 mm, total height: 5,775 mm, power: 200 kW (271.92 HP), input voltage: 380 V, input frequency: 50 Hz, number of digital displays: 2, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, Hydraulic Plate Bending machine planetary pinch pyramid with prebend. model MG35140V 3 roll capacity 3500x140 mm The machine was overhauled in 2024, Capacity : Plate width mm. 3500 Plate thickness mm. 140 Capacity chart in enclosed Tech data: -3 rolls driven hydraulic motorized with axial gear unit on each roll independent -Synchronized hydraulic rotation of the 3 rolls with variable speed. -Planetary design with pre-pinch fully hydraulic -Conical plate bending with hardened contrast pad -Digital position readouts of the bending rolls -Rolls installed on bearings double crown heavy duty -Overload safety hydraulic operation protection of the 3 rolls -High pressure hydraulic power pack with multi-pumps oil feed -Centralized control panel electric on wheels with joysticks and digital readouts -Emergency stop with safety system around the machine working area Rolls surface length mm. 3550 Top roll mm. 950 Side rolls mm. 880 Electric power on hydraulic unit Hp 100 + Hp 100 Voltage 380 Vac / 50 Hz Configuration & accessories installed with the machine -Hardened surface of the 3 rolls -Conical plate bending attachment , rolls tilt with contrast roller type. -Centralized operator panel with directional joysticks electric. Rjdpfjyzim Aex Ankscd -Digital position readout of the bending rolls. -Emergency and safety installations, certified CE -User manuals and instruction books in English -Dimension see layout drw in enclosed

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: EVO, controller model: EVO 4 AXIS 15", number of rollers: 4, roller (top) diameter: 300 mm, roller diameter: 300 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 1,250 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 25 mm, overall weight: 17,000 kg, total length: 5,500 mm, total width: 2,000 mm, total height: 2,100 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4roll hydraulic plate bending machine rated capacity 3000x35 mm Redpfxsy Tbf Is Ankecd MODEL MG M3035 , used year 2024 machine as new with warranty included Planetary dual pre-pinch Performance Capacity: Plate width 3000 mm plate thickness rolling 30 mm pre-bend 25 mm minimum rolling diameter ID 350 mm max open width plate feed 3100 mm special top roll reduced size 300 mm to achieve rolling ID 350 mm Power electric motor 18.5kw on hydraulic unit Vac 400/50 -480/60 Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted on wheels with joysticks and readout CNC programmable 4 axis controller touch screen 15” Setup virtual infinite rolling programs with teach-in mode and cad/cam operator interface --- Hydraulic motorized driven the central rolls Pre-pinch load adjustable for pre-bend Drop-end top roll front open unloading closed shells Re-rolling system for welded shells calibration. Safety and emergency stop Manuals and schematics machine dimension 5500x2000x2100 mm -weight 17ton --- Additional accessories available with the machine See layout drawing in enclosed nr.1 central support hydraulic 2.2 ton capacity to support large shell dia up to 4,5 meters id nr.1 side support hydraulic left side 2.2 ton double arm nr. 1 side support hydraulic right side 2.2ton double arm

Year of construction: 2004, condition: like new (used), Profile bending machine hydraulic heavy duty -output shafts 360 mm Equipped with traction tooling for H-beam HEB IPE INP rolling on the hard-side Configuration -pyramid dual pinch side rolls independent hydraulic -3 rolls driven hydraulic and gear unit -synchro. -set of rolls for HEB beam – INP beam - flat bar square bar. -Set of heads for traction the HEB – INP beam bending on the hard side -Set of rolls for pipe bending. Pipe 20 inches max capacity. Rjdpoiwa Hcefx Ankocd -Lateral correctors left/right side hydraulic operated in 3 directions -Add-on rollers angle bending & T-section leg-in / leg-out -Control panel console electric joysticks manual use & program automatic -Digital readout screen display 8 axis position reading of the rolls - 8 axis automatic programmable bending works -Electric Vac 400/50 ( rewirable on request ) -weight total of the machine approx. 65 Ton. -Hydraulic reservoir oil 1200 liters -High pressure hydraulic power unit multi pumps run on 100Hp electric motor . -Working speed variable slow-fast. -Emergency shut-down devices in compliance with safety requirement. -CE quality certification, Made in Italy manufacturing. -Service manuals and operation books along with the machine On request we supply additional set of rolls interchangeable to seat and bend the wanted profiles. Capacity table max.: – HEB 500 -INP 600 *-ANGLE 200 MM *-T300 MM *-20″ PIPE SIZE *-UNP 500 MM *-FLATBAR 300X80 MM *-SQUAREBAR 200 MM *-PIPE/TUBE UP TO 508MM see capacity chart in enclosed

Condition: like new (used), functionality: fully functional, Year of construction: 2025, machine/vehicle number: M3022, control type: manual, degree of automation: manual, actuation type: hydraulic, controller manufacturer: Delsy, controller model: Digital readout, number of rollers: 4, roller (bottom) diameter: 330 mm, roller (top) diameter: 350 mm, side roll diameter: 260 mm, roller diameter: 400 mm, roller length: 3,000 mm, working width: 3,100 mm, working height: 900 mm, sheet thickness (max.): 22 mm, sheet thickness steel (max.): 22 mm, sheet thickness stainless steel (max.): 22 mm, sheet thickness aluminum (max.): 30 mm, overall weight: 13,000 kg, power: 10 kW (13.60 HP), input voltage: 400 V, input frequency: 50 Hz, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, hardened rollers, swiveling upper roller, Bending capacity with dual Initial pinch planetary plate width 3000 mm thickness 22 mm pre-bend 18 mm --- Rcedpjid Al Nsfx Ankod Length on the rolls 3100 mm top roll 350 mm lower roll 330 mm Power electric 20Hp Vac 400/50 Installed configuration Hardened surface of the 4 rolls Driven central rolls rotation hydraulic motorized with gear units Synchronized hydraulic rotation between the rolls Rolls parallelism lifetime set with torsion bar Conical plate bend hydraulic attachment Calibration re-rolling feature for welded shells Front open drop-end to unload the closed rolled plates. Control console electric commands with digital readout Safety and emergency systems installed Manuals and schematics originals

Condition: like new (used), functionality: fully functional, Year of construction: 2024, machine/vehicle number: 4ROLL 3000X 15 MM, roller (bottom) diameter: 270 mm, roller (top) diameter: 290 mm, side roll diameter: 250 mm, roller diameter: 310 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 800 mm, sheet thickness (max.): 15 mm, sheet thickness steel (max.): 15 mm, sheet thickness aluminum (max.): 20 mm, sheet thickness copper (max.): 25 mm, overall weight: 8,500 kg, total length: 5,100 mm, total width: 1,500 mm, total height: 1,800 mm, power: 7.35 kW (9.99 HP), number of digital displays: 2, warranty duration: 12 months, cone diameter: 400 mm, working length: 3,000 mm, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4 ROLL DUAL PRE-PINCH ROLLING MACHINE NEW -Width of plate 3000 mm -Thickness of plate rolling 15 mm -Thickness of plate pre-bend 12 mm minimum bending diameter ID 350 mm Rolls dimensions: -Surface length mm. 3100 -Top roll mm. 290 -pinch roll mm. 270 -Power electric 10 Hp Technical data: -rolls hardened surface high resistance -variable rolling speed -Powered driven hydraulic rolls rotation -conical bending attachment roller type -calibration system re-rolling welded shells -deflection pinch pressure adjustable upon the thickness -overload protect complete safe operation of the machine. -control console on wheels with electric joysticks commands -position readout digital display for rolling memorize and repeat Rjdpfxswfc S Te Ankjcd

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: G90230201, saw blade diameter: 350 mm, total length: 1,500 mm, total width: 970 mm, total height: 1,400 mm, cutting height (max.): 100 mm, overall weight: 350 kg, saw blade speed: 3,000 rpm, input voltage: 400 V, Automatic CNC controlled circular saw for cutting and drilling / tapping aluminium. Tronzadoras MG - GAA-350-90+CNC+TR12 • Automatic cycle. • 700 mm ballscrew feeder. • OMRON controller. • 10 programs with 30 lines. • 20 parts in memory. • Emergency stop. • Adjustable feeding and cutting speeds. • Automatic adjusted cutting length with multiple advances. • Cut to 90º. • Automatic air-oil cooling. Rsdpjvl Eahjfx Ankscd • Semi-automatic or fully automatic operation. The machine is inspected, serviced and ready for work.

Condition: used, The MG TLG single-head up-cut saw is equipped with a Ø 350 mm blade and a rotating table for cuts at 45°, 90°, and intermediate angles. The machine offers a maximum cutting height of 125 mm. Technical Specifications Blade diameter: 350 mm Table rotation: 45° – 0° – 90° Pneumatic clamps Three-phase motor 220/380 V or single-phase 220 V Motor power: 2 HP (three-phase) / 1.5 HP (single-phase) Cutting speed: 42 m/s Built-in automatic lubrication system Rcodpfx Anezcfdxjksd Maximum cutting height: 125 mm Movable support turret Dimensions Length: 800 mm Width: 700 mm Height: 1,225 mm Weight: 150 kg

Condition: ready for operation (used), Year of construction: 2018, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,000 mm, controller manufacturer: MicroStep, controller model: iMSNC, number of axes: 3, This 3-axis MicroStep AquaCut-W 4001.20 was manufactured in 2018. It features a working range of 4,000 x 2,000 mm and is equipped with a high-pressure pump system capable of 400 MPa. The machine includes automatic height control for the cutting head and a waterjet cutting table with grid support. If you are looking to get high-quality waterjet cutting capabilities, consider the MicroStep AquaCut-W 4001.20 machine we have for sale. Contact us for further details. - CNC Control Unit: MicroStep iMSNC with MMI console, 24" touchscreen, and two LCD operator units on the gantry- Working Range / Processing Area: 4,000 x 2,000 mm- Laser Pointer: Laserpointer with automatic offset transmission- Control Modules: Expert system, Service & Maintenance wizard, CNC program loading wizard, Automatic mechanical scanning calibration, Cutting program management (MRP), EcoInfo, MachineInfo, User-Management- CAM Software: AsperWin Basic, AsperWin Select macro library, AsperWin NC-Sim simulator- Connectivity: USB 3.0 port, MicroStep Remote Diagnostics, TeamViewer access, GSM Modem for SMS error notifications- Cutting Table: Waterjet cutting table with grid support- Height Control: Automatic height control for the waterjet cutting head- High-Pressure Pump System: BFT ECOTRON 40.37- Pump Permissible Working Pressure: 400 MPa (4,000 bar)- Pump Max Flow Rate: 3.8 l/min- Pump Tank Capacity: 140 liters- Pump Power Consumption: 39 kW (at 3*400 V, 50 Hz) / 46 kW (at 3*480 V, 60 Hz)- Pump Gross Weight: 1,110 kg- Pump Serial Number: 16414- Pump Drawing Number: 120343- Cutting Head: Allfi Cutting Head Type IV (1 unit)- Abrasive Head: Allfi Abrasive Head CENTERLINE Typ II "Long Life" (1 unit)- Abrasive Systems: Allfi Abrasive Dosing system, Allfi Abrasive Conveying System Type II, Automatic abrasive dosing via CNC- Sludge Removal: Desludging system (scraper conveyor) for 4,000 mm length, including sedimentation tank- Water Conditioning: Water stabilization dosing unit using WIN2054Si water chemistry- Safety Equipment: Double-sided cable pull safety mechanism (collision protection) via Emergency Stop- Total System Layout Footprint Dimensions: Approx. 7,122 mm (Length) x 4,200 mm (Width) (Main machine footprint alone is 7,122 mm x 3,476 mm)- Required Flooring Base: Concrete min. B20, thickness min. 200 mm, surface evenness ±5 mm Rcsdpfx Anoy Ui Hpokjd

Condition: excellent (used), Year of construction: 2010, operating hours: 2,125 h, functionality: fully functional, MG Recycling – Copper Cable Granulation Line Manufacturer: MG Recycling Type: Matrix400 Complete cable granulation line Condition: Very good – In perfect working order Availability: Immediate Technical description: Cable granulation line including: • Pre-shredder, completely overhauled recently o All rotor bearings are new o Gearbox bearings are new • Conveyor with magnetic rollers for scrap separation • Metering hopper • Feeding conveyor • Blade mill with 3 / 4 / 5 mm sizing screens • Separation by cyclone and zig-zag separator • Finishing turbo • Density separation table • Dust extraction with bag filter Spare parts: • Pre-shredder: 1 set of knives + counter knives • Blade mill: 3 sets of blades and counter blades Capacity: ≈ 200 kg/h of finished product Application: Processing and recycling of copper cables Rcodjx It N Uspfx Ankod Price: €95,000 (Complete processing line) Spare parts: €20,000 Additional information: • Photos and further information available upon request 📩 Contact us for more information.

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: 403/05, table length: 3,000 mm, power of the servo motor: 1,500 W, table width: 1,500 mm, Equipment: double-sided, With plasma cutting system HyperTherm Powermax 1100 and air drier M.T.A. DE009 Machine was used in the production of ventilation ducts and fittings. AsperWin (base program for operating CNC machine for Windows. Dxf-files can be imported) Rodpfsw I D Iasx Ankscd Asper Nesting (enables effective creation of nests with a big number of different cut parts to achieve best possible utilization of material with minimum waste) and Air Select (for ductwork manufacturers enables fast and comfortable design of HVAC components).

Condition: used, Year of construction: 2019, Cable granulation plant MG Recycling 380VZT Year of manufacture: 2019, little used, approximately 1,500 operating hours immediately available The cable granulation plant consists of: - Cutting mill - Zig-zag separator - Balling mill Rcjdpfx Anjxz Utroked - Separation table - Pneumatic conveying system with filter unit - Feed hopper 1.2 m² with feed belt

Condition: new, Year of construction: 2023, functionality: fully functional, Cable Granulation Plant MG Recycling 220VZT with Pre-Shredder Tritronic 845i Original packaging, immediately available Throughput approx. 400–500 kg/h (depending on material) Cable granulation system power: 60.5 kW Rodpfxexz Ur Is Ankscd Comprising: - Cutting mill - Zig-zag separator - Pelletizing mill - Separation table - Pneumatic conveying system with filtration unit Pre-shredder Tritronic 845i Power: 45 kW Rotor length: 800 mm With conveyor belt and intermediate bunker Automatic integration with the cable granulation plant

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 2815, sheet thickness (max.): 100 mm, overall weight: 1,100 kg, total width: 3,500 mm, cutting current: 154 A, TECHNICAL DETAILS Working area: 9,000 mm Sheet thickness (max.): 100 mm MACHINE DETAILS Overall width: 3,500 mm Overall weight: 1,100 kg Type of input current: Three-phase Redpfx Ansy Tkkyokecd Input voltage: 400 V Cutting current: 154 A Input frequency: 50 Hz Short-circuit current: 6 kA IP protection rating: 43/20 Power supply: 3L+N+PE AC 400/230 V, 50 Hz

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 2202, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, type of input current: three-phase, input voltage: 400 V, input current: 50 A, Microstep Mastercut Eco Plus 3001.15 Year of manufacture: 2017 Control system: IMSNC Oxy-fuel cutting table: 3000 x 1500 mm Extraction duct left / right Plasma source: Kjellberg HiFocus 161i, adjustable 10 - 160 A Power source HiFocus 161i PLUS • Flexible adaptation of the cutting process to required conditions thanks to soft-switch inverter and microprocessor control • Optimal process control with ultra-fast regulation of cutting current • Process monitoring for torch cooling, ignition time, pilot arc time, short circuit time during torch ignition, and power source • Operating status and error display via LED and screen • Analog and serial interfaces for adaptation to CNC controllers • Infinitely adjustable cutting current from 10 - 160 A and during marking from 5 - 25 A • Optimal piercing through infinitely variable delay time for the main arc and adjustable current rise • Adjustable current reduction for cornering, start, and end signals of the guidance system • Automatic display of the preset cutting current • Serial data transmission for PC-based diagnostics Plasma cutting technology: Contour Cut • Further development of HiFocus technology for mild steel • Optimized for cutting fine internal and external contours • High cutting quality and contour accuracy • Holes with angular deviations according to DIN EN ISO 9013 range 2-4 • Minimal angular deviations and smooth cut surfaces • Excellent repeatability and dimensional accuracy • No tedious post-processing – high productivity and low costs • No additional equipment, software, or new consumables required • Standard equipment Plasma torch PerCut 200/210 • PerCut 200 plasma machine torch for standard applications and high-precision bevel cutting • Quick-change PerCut 210 torch with threaded lock for quick and convenient tool swapping • Special torches available for special applications • Higher cutting speeds reduce cost per meter • Long service life of consumables conserves resources • Narrower kerf means fewer emissions and less waste • Significantly lower gas consumption compared to competitors thanks to efficient liquid cooling up to the nozzle tip • Lower noise levels due to reduced gas consumption • Bevel cutting up to 50 degrees with standard consumables • Cutting and marking possible with the same consumables Power source HiFocus 161i Power supply: 400 V; 3 Ph; 50 Hz Max. power input: 28 kVA (100% duty cycle) Main fuse, slow-blow: 50 A Protection class: IP22 Open circuit voltage: 330 V Cutting current: 10 – 160 A (100% duty cycle) Marking current: 5 – 25 A (100% duty cycle) Cutting range: Max. 50 mm Recommended: 0.5 – 38 mm Max. piercing thickness: 30 mm Weight: 206 kg Plasma machine torch PerCut 200 Quick-change torch PerCut 210 Rcodpfoy Nd Hyex Ankod Clamping diameter: 50.8 mm Plasma gases: O2, N2, Ar/H2 Marking gases: Ar Swirl gases: O2, N2, Air, N2/H2 (F5)

Year of construction: 2021, condition: ready for operation (used), overall weight: 4,920 kg, total width: 1,460 mm, total height: 1,520 mm, product length (max.): 2,925 mm, Roll bending machine manufactured in 2021. This MG MG4R1520C features a working width of 1,550 mm and a bending capacity of 20.0 mm. It includes a CNC TouchCommand EVO control for enhanced precision and efficiency. If you are looking to get high-quality bending capabilities, consider the MG MG4R1520C machine we have for sale. Contact us for further details. • working width: 1,550 mm • Bending / pre-bending capacity: 20.0 / 16.0 mm • Top roll diameter: 270 mm • Bottom roll diameter: 260 mm • Side roll diameter: 220 mm • Drive power (central hydraulics): 7.5 kW (15 A) • Control: CNC TouchCommand EVO • Electrical supply: 400 V, 50 Hz, 3Ph + PE Rcedpey Ifrzefx Anksd Additional equipment • Crowning of rolls • Inductive hardened rolls • Calibration device • Cone bending device • Hydraulic brake for top roll • Additional roll (1,550 x 230 mm)

Condition: repair required (used), functionality: limited functionality, Year of construction: 2017, control type: CNC control, degree of automation: automatic, actuation type: electric, laser type: fiber laser, laser source manufacturer: IPG, laser source model: YLS-4000-CUT, We offer this repair-required VIRS MSF 3001.15L laser cutting machine, year 2017. Manufacturer: Microstep / VIRS Model: MSF 3001.15L Year of manufacture: 2017 Modules 1, 4, and 5 automatically lock immediately after cutting and require unlocking by IPG. Half of the 2 kW power is available. Rjdpey Ri Tuefx Ankscd If you have any additional questions or need more information, please send us a message or call us.

Condition: like new (used), Year of construction: 2023, operating hours: 1,400 h, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,000 mm, For sale: MicroStep WaterCut 2001.30W waterjet cutting machine in perfect condition, manufactured in 2023. The machine is equipped with a BFT Ecotron 40.37 high-pressure pump – 4000 bar and 37kW – one of the top-performing and most reliable pumps on the market. Key specifications: - Working area: 2000 x 3000 mm Rjdpfx Aey Ecr Hjnkjcd - Cutting head: 3-axis with anti-collision sensor - Total working hours: approx. 1400 h The machine is sold as a complete, ready-to-run package, including: - 1-ton abrasive feeder (Allfi) - Automatic sludge removal system (tank cleaning system) This configuration allows you to begin production immediately without additional investment. The machine is available for immediate delivery.

Condition: good (used), Year of construction: 2018, MG Tech Leanbox Case former Rodpfx Aswxlm Henkscd Serial: HO2859 2018, Leanbox case former, 1250mm loading height, 600mm capacity cardboard, currently set for 385mm x 385mm form punch, up to 20 boxes per min, touch screen controls, max blanks 750mm x 750mm, 3Ph

Condition: ready for operation (used), Year of construction: 2014, saw blade diameter 350 x Ø 32.0 mm capacity degrees: flat 175 x 75 mm capacity degrees: square 110 x 110 mm capacity degrees: flat 100 x 80 mm capacity degrees: square 85 x 85 mm turning speeds 3000 U/min total power requirement 1.5 kW weight of the machine ca. 180 kg dimensions of the machine ca. 870 x 710 x 1435 mm Equipment : - semi-automatic circular saw for cutting PVC and aluminum profiles - two-hand safety operation - Miter adjustment : * left * right 0 / / - Large protective hood, covers entire working area - Saw blade - 2x vertical pneumatic clamping cylinders - Adjustable blade and cutting feed - Air dust gun Rcodpfxsyu U Dfs Anked Work sequence 1) Setting the cutting angle 2) Inserting the material 3) Adjusting the stroke speed 4) Bring the clamping cylinder up to 20 mm of material 5) Clamp the material 6) The machine is ready for operation by pressing the start button. 7) Press and hold the two SAW buttons, the material is sawn. 8) At the end of the cycle, release both SAW buttons and press the STOP button 9) Open the vice and remove or push the material forward * Special accessories included : - ALU chip extractor

Condition: used, Year of construction: 2004, High-capacity band saw with roller feed MG model BMSO 320L Used semi-automatic band saw - High-capacity band saw with roller feed - Progressive hydraulic feed Rjdpex Ng Sxefx Ankocd - Chip cleaning brush - Saw speed adjustable via electronic frequency inverter from 20 to 100 m/min - Front millimeter stop of 500mm with electric limit switch Serial number: 41021 - Blade dimensions: 4160x27x0.9mm - Motor: 1.5kW - Round cutting capacity at 90°: 320mm - Rectangular cutting capacity at 90°: 500x320mm - Square cutting capacity at 90°: 320mm

Condition: good (used), Year of construction: 2015, functionality: fully functional, saw blade diameter: 600 mm, cutting range round steel at 90°: 220 mm, For sale: 1 used CNC fully automatic aluminum circular saw incl. suction unit Manufacturer: Tronzadoras MG Rodpfx Aouyyhasnkocd Model: GAA-600 - CNC YEAR OF MANUFACTURE: 2015 TECHNICAL DATA - Cutting range round: 220mm, box: 300 x 90mm, square: 175mm - Drive power 4.1 KW / 400 V / 50 Hz - Speed 3000 rpm. - Cutting speed 55 m/sec. - Blade dimensions 600 x 50 mm - max. cutting height 220 mm - Dimension 2020 x 1510 x 975 mm - Weight 650 kg Machine comes incl. 6m infeed roller conveyor and the appropriate extraction system. The saw can be inspected in our warehouse in 09599 Freiberg.

Year of construction: 2017, condition: ready for operation (used), An asymmetrical three-roll plate bending machine MG is available. Working width: 2000mm, roller diameter: 130mm, max. plate thickness: 3mm, power: 6kW, weight: approx. 2000kg. An on-site inspection is possible. Rcodpfxsyttwbj Anked