Used Mk Guf-P 2041 Af/8946/700 for sale (48,569)

Condition: used, This listing is for the Spectrum Labs KrosFlow KR2i TFF System The unit is in full working condition and is ready for immediate release The KR2i TFF System is a versatile tangential flow filtration system, suitable for running volumes from 2 mL up to 10 L. It consists of a pump, tablet controller, scale, module stand, and real-time data collection software. The KR2i can mount up to two pump heads, allowing users to add an additional one if desired. Key Features of KR2i TFF System: Hollow fiber filter for 2 mL to 10 L / Flat sheet cassettes can process 12 mL to 15 L Hnedpoxwc Euefx Agyok Auxiliary pump (900-1893): 600 RPM SAW-KR21 Scale: Capacity up to 20 kg with readability of 0.2 g Scale platform size: 18 x 18 cm Tablet control for ease of operation and real-time monitoring IP33-rated plastic enclosure is easy to clean Assortment of accessories included (see photos) The KR2i pump is designed to handle abrasive slurries, corrosive fluids, and highly viscous fluids with minimal wear. The system ensures that the fluid only comes into contact with the tubing and tube material, eliminating valves that could clog and making the inner surfaces easy to clean. With its compact footprint and versatility, the KR2i is an ideal choice for small-volume, R&D-scale microfiltration and ultrafiltration

Condition: refurbished (used), battery capacity: 620 Ah, battery voltage: 80 V, total height: 784 mm, total length: 1,025 mm, total width: 708 mm, Tested forklift battery for your truck – 80V 4PZS 620Ah – DIN A + 1-year warranty + Complete with aquamatic system + Includes end discharge device & REMA 320 connector (other plug types can be installed upon request) + Capacity: minimum 90–100% (C5 capacity protocol is provided with delivery) + Year of manufacture: 2024 Dimensions: Length: 1,500 mm Width: 708 mm Height: 784 mm Hnodpfswzvy Nsx Agyok Weight: approx. 1,600 kg Suitable for the following models and more: Linde E 20 - 325-00 Linde E 20 / 600 - 387-00 Linde E 20 / 600 H - 1252-01 Linde E 20 / 600 H - 387-00 Linde E 20 / 600 RH - 387-00 Linde E 20 H - 387-00 Linde E 20 HOCH - 325-00 Linde E 20 HOCH - 336-00 Linde E 20 P - 325-00 Linde E 20 Z - 325-00 Linde E 25 - 325-00 Linde E 25 - 336-00 Linde E 25 - 387-00 Linde E 25 / 600 - 387-00 Linde E 25 / 600 H - 1252-01 Linde E 25 / 600 H - 387-00 Linde E 25 / 600 RH - 387-00 Linde E 25 CH - 387-00 Linde E 25 H - 387-00 Linde E 30 CH - 387-00 Linde E 30 H - 387-00 Linde E 30 P - 325-00 Linde E 30 SH - 1276-00 Linde E 35 - 337-00 Linde E 35 - 337- Linde E 35 P - 337-00 Linde E 40 P - 337-00 Linde K - 5231-00 Linde K - 5231-00 – side battery change Linde K 12 - Linde K 15 - Linde P 200 - 370-00 Linde P 250 - 127-00 – vertical battery change Linde P 250 S - 127-05 Linde P 250 SWB - 5007-10 – side battery change Linde P 250 SWB - 5007-10 – vertical battery change Still MX-X Still R. 07-25 Still R 60-20 Still R 60-22 Still R 60-25 Still RX 60-25 Still RX 60-30 Jungheinrich EFG 25 Jungheinrich EFG 425 Jungheinrich EFG 425 K Jungheinrich EFG V 25 Jungheinrich EKX 515 Jungheinrich EKX 515 K Jungheinrich EKX 525 K Jungheinrich ETX Toyota 7FBMF20 Toyota 7FBMF25 Toyota 8FBMKT25 Toyota 8FBMKT30 Toyota FBM25 Toyota FBMF20 Toyota FBMF25 Crown TSP 6000 - B Crown TSP 6000 - C Crown TSP 7000 Atlet EH 25 Balkancar EV715 Balkancar EV720 Clark GEX25 Heli CPD 30 Heli CPD 35 Hubtex MQ 40 Hyster E5XN Hyster J2.0 Hyundai 25BHA7 Mitsubishi FB25CN Nissan 1Q2L25Q Nissan QX25 Common battery sizes available on request. Transport available.

Condition: ready for operation (used), Siemens 1FT5066-0AF01 - Z Permanent magnet motor SN:E7M92927001002 , Z= G45: Holding brake installed EBD 0,8 M 24V - 18W ,used, normal signs of wear, 100% functional, scope of delivery as per photos Hedpfevgpnfex Agysnk

Condition: new, Rexroth MKD071B-061-GP0-KN 3-Phase Permanent Magnet Motor MNR: R911261314 SN:7260204134623, unused in opened original packaging, 100% functional, scope of delivery as per photos Hodpotplg Tefx Agysnk

Condition: ready for operation (used), Siemens 1FT5064-0AF01-Z permanent magnet motor SN 5G85 9952 07 002, used, normal signs of use, 100% functional, scope of delivery as per photos Hodsk Uy U Eepfx Agyjnk

Condition: ready for operation (used), Siemens 6AF7003-0DA BUS adapter , used, normal signs of wear, 100% functional Hnodpfx Aei Edbyegyjk

Condition: new, Schunk PGS100 stroke 6mm tandem power clamping block 0300670, unused in original packaging, 100% functional, scope of delivery as per photos Hedpfx Asx Eudbsgyjnk

Condition: new, Schunk KSP100-Z tandem power clamping block 400211 9bar, unused in original packaging, 100% functional, delivery as shown in photos Hnedpex Euc Defx Agyek

Condition: new, Gamba & Fiorito Gamfior MKA 30-L spindle , hole spacing of the mounting holes: 82x82 mm, Ø drive shaft: 18/10 mm outside, 5 mm inside, unused, mint condition, 100% functional Hnodji D H T Ijpfx Agysk

Condition: ready for operation (used), Tox Pressotechnik STE 601-007-001 / EPMK 100.101.600.001 screw jack – overall length: 128 cm, used, good condition, 100% fully operational, scope of delivery as per photos. ATTENTION: Please enquire separately for packaging and shipping costs! Hjdox Dxqmepfx Agyonk

Condition: good (used), functionality: fully functional, Year of construction: 1973, machine/vehicle number: NL, Demag P416 H7 4/1 wire rope hoist hoist crane indoor crane overhead crane payload 6300Kg - 6,3t 380V 16A, lift 3,5m, 4 strands ( 2 lifting speeds - 4 / 8 m/min ) Used condition Hnedpfx Agjupw A Sjyjk Collection in 75053 Gondelsheim, forklift available for loading Shipping by forwarding agent possible, please ask for zip code

Year of construction: 1998, condition: excellent (used), Kap Saw Reinchardt NC 700 automatic Manufacturer Reinchardt Model / machine type NC 700 Year of production 1998 Machine category Kapła Kapowa Location Hodod H Hmhjpfx Agyjnk Gorzów Wlkp. Conditions of delivery OWN RECEIPT Cost of delivery Customer cover Start type to be agreed Description Comments CUTTING SAW FOR CUSTOMIZED DIMENSIONS, ACCURACY UP TO 1MM, NEW CONTROLLER, SAW BLADDER BY HYDRAULIC AGREEMENT

Condition: used, suitable for thermal oil heating (= 131 kW) 9 kW with lower and upper belt with Teflon infeed belt 1.200 mm extra product infeed belt outfeed belt suitable for fire protection suitable for CIP-cleaning frying length 3.000 mm belt width 700 mm adjustable speed Hnodpfxoy Alpcj Agysk oil circulation pump oil level control sediment removal system filter lifting unit with hoists dimensions (l x w x h) : ± 6.850 mm x 2.000 x 3.400 mm

Condition: good (used), Year of construction: 1983, functionality: fully functional, Universal Production and Tool Milling Machine Type: UWF 700 PH Machine No.: 5670 Serial No.: 034650 Year of manufacture:1983 Control system: Positioning and path control incl. display HEIDENHAIN TNC 135 3-axis manual input control TECHNICAL DATA Working area X-axis (longitudinal) manual/automatic: 410/390 mm Y-axis (transverse) manual/automatic: 310/290 mm Z-axis (vertical) manual/automatic: 400/380 mm Quill travel vertical: 63 mm Clamping surface, vertical: 830 x 224 mm Number of T-slots: 4 Angular table clamping surface: 700 x 285 mm 6 T-slots: 12 H8/45 mm Hnedox Ry Atspfx Agyjk Workpiece weight: 200 kg Distance table – spindle nose (vertical): 0 – 515 mm Distance table – spindle center (horizontal): 30 – 565 mm Drive power (at 1500 rpm): 2.2 kW Speed range: 45 – 2000 rpm Number of speeds: 12 Speed progression (geometric steps): 1.4 Tool holder (DIN 2079): ISO 40 Feed range (all axes): 2 – 1500 mm/min Rapid traverse (all axes): 1.5 m/min Operating voltage: 380 V/50 Hz Machine dimensions: 1.2 x 1.6 x 1.7 m Space required: 2.1 x 2.1 m Machine weight: 1100 kg EQUIPMENT / ACCESSORIES  Hand operation and CNC program control  Vertical and horizontal machining  Swiveling vertical milling head  Adjustable-angle vertical milling head  Various tool holders  Manual quill feed (vertical)  Angular table 700 x 285 mm  Coolant system  Coolant and chip tray  Electrically secured chip guard in work area  Mounting elements  Machine lamp  Documentation Condition: Control system overhauled, workshop tested

Condition: excellent (used), Lot of HSS Twist Drills; Design: HSS; tip drill – steel drill; 118° point angle, drilling depth. Morse taper shank, depending on diameter: MT2, MT3, MT4. Spiral angle 30°. Diameters: see "Pictures" / table. "Dimensions ø" / "Flute length mm" / Total length MT2 ø21.0 120/220mm ___G10 01 → € MT2 ø22.0 90/170mm ___G15 02 → € Hjdpey An Izefx Agyonk MT2 ø22.5 150/250mm ___G10 03 → € MT3 ø26.5 150/275mm ___G15 04 → € MT3 ø28.0 150/275mm ___G15 05 → € MT3 ø31.0 150/275mm ___G15 06 → € MT4 ø34.0 150/300mm ___G15 07 → € MT4 ø36.0 160/310mm ___G15 08 → € MT4 ø39.0 130/270mm ___G15 09 → € The G10–G15 numbers are internal references. Package price: on request More twist drills will be available soon in my other listings! You will receive an invoice, listed price = Net price incl. 19% VAT. Packaging & shipping within Germany €11.00 International shipping on request. If you have any questions, feel free to contact me: 0171/8082406 The original pictures are part of the item description. Please also check my other offers. Collection, shipping, bank transfer and PayPal possible.

Condition: used, Year of construction: 1995, CNC Gantry Flame Cutting Machine Manufacturer: Messer Model: Omnimat P 7000 Year of manufacture: 1995 CNC control: Global Control Plus Track gauge: 7,000 mm 8 x oxy-fuel torches type ALFA 8 x Omnilift 200 Hsdeyay Dhspfx Agyonk Without rail track Without table Without filter 16426

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Hsdsua Tbwspfx Agyenk Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: used, mileage: 243,600 km, power: 353 kW (479.95 HP), first registration: 12/2023, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 02/2027, brakes: retarder, color: grey, gearing type: automatic, Year of construction: 2023, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, IVECO S-WAY long-haul tractor unit with prepared PTO, Long Distance Driver's Cab with one bed, ZF Intarder, automatic climate control, stationary air conditioning, auxiliary heater, external sun visor, luxury air-sprung driver's seat (heated and ventilated), electric windows (double), electrically adjustable and heated exterior mirrors, side sun blinds for driver and passenger, roof and side spoilers, ABS, disc brakes with EBS, adaptive cruise control with collision warning and emergency braking function, lane departure warning system, traction control, ESP, central lubrication, 12-speed transmission type 12 TX 2210 TD, PTO prepared (hydraulic system available on request at extra cost), 640 + 480 litre aluminium fuel tanks, 135 litre AdBlue tank, digital tachograph, full LED headlights with LED taillights, work lights, battery master switch, on-board computer, IVECO-Connect fleet management with navigation system, multifunction steering wheel, central locking with remote control, refrigerator, reverse warning system, external storage compartments left and right, rear axle load indicator, air-suspended rear axle, rear axle diff-lock, wheelbase 3790 mm, gross combination weight 44,000 kg, first owner, well-maintained workshop condition, good overall condition, ORIGINAL MILEAGE (verifiable), NOT a rental vehicle, Euro 6E engine, low noise, German vehicle with German documents, not a low-liner or mega tractor unit! Sale to business customers only! All information without guarantee! Subject to errors and prior sale! Hsdpoyk N Aujfx Agyenk

Condition: new, Year of construction: 2026, functionality: fully functional, type of input current: three-phase, total length: 950 mm, total height: 930 mm, table width: 180 mm, input voltage: 400 V, total width: 560 mm, table length: 700 mm, stroke length: 52 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 50 rpm, Equipment: documentation/manual, Features Equipped as standard with forward and reverse rotation enabling thread cutting Tilting milling head on both sides for angled drilling, bevel milling, etc. Universal application, e.g. milling, drilling, tapping, etc. Large cross table with scale Infinitely variable speed control 2-speed gearbox for optimal power transmission High concentricity thanks to precision bearings Ergonomically designed control panel Digital display of feed and spindle speed Hnjdpfx Aoytpl Ujgyjk Drill chuck B-16 Arbor Table length 700 mm Digital spindle feed display Digital spindle speed display EMC filter according to CE standard Safety guard Service tools Base / stand Technical data Drilling capacity in steel: 25 mm Maximum face mill diameter: 80 mm Maximum end mill diameter: 25 mm Distance between spindle and column: 170 mm Minimum distance between spindle and table: 45 mm Maximum distance between spindle and table: 325 mm Spindle travel: 52 mm Spindle speed range, variable: 50 – 3000 rpm Spindle taper: MT3 Table size: 700 x 180 mm Maximum X-axis travel: 490 mm Maximum Y-axis travel: 160 mm Tilting milling head: -90° / +90° Milling head height adjustment: 275 mm T-slot size: 12 mm Motor power: 1 kW Dimensions (L x W x H): 950 x 560 x 930 mm Weight: 160 kg Delivery to the customer is possible. Delivery cost according to the individual quotation of the transport company. If you are interested in other machines, please visit our website.

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system expansion available optionally External dimensions: Height 8,700 mm Width 3,500 mm Depth 1,580 mm 51 supports with a payload of 350 kg each In the clear usable dimensions: H = 255 mm W = 3,050 mm D = 520 mm Chain pitch 305 mm 51 galvanized intermediate shelves Total payload up to 19,000 kg Storage table at 990 mm above floor level with stainless steel worktop, 315 mm deep Color: gray Drive motor power: 1 x 3.8 kW / 400 volts Subject to errors and technical changes, Surfaces cleaned, signs of wear and minor deformations possible Hsdped Spf Rjfx Agyenk Delivery & installation currently mainly in Germany, Austria and other neighboring countries

Condition: used, Year of construction: 2017, operating hours: 854 h, total width: 2,450 mm, total height: 1,100 mm, total length: 1,900 mm, Empty weight: 800 kg Price: On request - Year: 2017 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 5037411-000150 - Operating hours: 854 - Transport dimensions: 1900mm x 2450mm x 1100mm (l x w x h) - Transport weight [kg]: 800kg Hnjdpfx Agexan Utoysk - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2005, operating hours: 9,959 h, Type of fuel: Diesel Empty weight: 2.950 kg Dimensions (LxBxH): 220 x 105 x 212 cm Hodpfx Ageyu Rmijysnk Lifting capacity: 1.600 kg Lift height: 486 cm Clearance lift height: 163 cm Fork dimensions: 1.200 x 970 mm - Year: 2005 - Documentation available: Yes - └ Type Documentation: User manual - CE marking present: Yes - CE certificate present: No - Serial number: B810B05342C - Operating hours: 9959 - Lifting capacity: 1600kg - Lifting height: 4860mm - Overhead clearance: 2120mm - Free lift: 1630mm - Fork length: 1200mm - Maximum fork width: 970mm - Minimum fork width: 210mm - Number of wheels: 4 Wheels - Attachment: Side-shift - Options: Work lights, Free-lift, Half cabin - Mast: Triplex - Drive: Diesel - Motor brand: Mazda - Transport dimensions: 2200mm x 1050mm x 2120mm (l x w x h) - Transport weight [kg]: 2950kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: used, Year of construction: 2022, operating hours: 700 h, Lightly used and well-maintained Komatsu PC 20 R-5 mini excavator Technical data: * Operating weight incl. attachments approx. 2,000 kg * Komatsu 3D67E-2A engine with 11.8 kW * Overall length: 3,845 mm * Overall height: 2,370 mm * Overall width (minimum): 1,280 mm (990 mm) * Track width: 230 mm * Tail swing radius: 1,120 mm * Track length: 1,570 mm * Max. digging reach: 4,100 mm * Max. digging depth: 2,370 mm * Minimum swing radius: 1,515 mm Equipment included: * 2 travel speeds with auto shift-down * Servo control * Long dipper arm * 2-way auxiliary hydraulics to the boom (switchable for hammer operation) * Protective cover on the boom lift cylinder * Work light on the boom * Dozer blade * Travel alarm (acoustic) Hnodporwvvysfx Agyok * Tool kit * CE conformity * Cab with heater * 1x standard hydraulic circuit (with pedal) * Suspension driver's seat with fixed 2-point safety belt * Rubber tracks * Mechanical quick coupler LEHNHOFF MS01 + load hook Other: * Attachments are NOT included - sale on request

Condition: excellent (used), Year of construction: 2013, Airpress piston compressor model K 500 - 700 Super Motor power (HP/kW): 5.5 HP / 4.0 kW Compressed air tank volume (l): 500 Maximum pressure (bar): 15 Intake capacity (L/min): 700 L/min Hnjdpjyy U S Usfx Agyek Output capacity l/min*: 450 L/min Sound level dB(A) (0 m): 99 Voltage (V): 400 V / 50 Hz / 3 phase Location: ex stock 54634 Bitburg - immediately available - Prior sale reserved

Condition: used, mileage: 601,000 km, power: 316 kW (429.64 HP), first registration: 03/2008, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: white, gearing type: mechanical, loading space length: 6,100 mm, loading space width: 2,460 mm, Year of construction: 2008, Equipment: ABS, air conditioning, crane, MAN TGA 35.430 / 8x2 Platform 6,10 m + CRANE + REMOTE CONTROL Accident-FREE IN GOOD CONDITION! ? YEAR OF PRODUCTION: 2008 ? MILAGE: 601 000 km EQUIPMENT: ? ABS ? C. LOCKING ? EL. WINDOWS ? EL. MIRRORS ? POWER STEERING ? TACHOGRAPH PLATFORM: 610 x 246 cm (L x W) CAPACITY: 13 000 kg TOTAL WEIGHT: 32 000 kg WHEELBASE: 185/350/136 cm TIRE SIZE: 315/80R22,5 SUSPENSION: FRONT: SPRING BACK: AIR CRANE: HIAB 700 E - 6 + REMOTE CONTROL Hnedpfew Ruf Isx Agyek TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? Ref. nr: 42138