Used Multi-Purpose Machine With 3 Functions for sale (109,207)

Condition: good (used), Hang 87F 3-Head Eyeletter with Extraction Manufacturer: Hang Germany Very good condition, recently serviced. The machine is used for setting eyelets. Three eyeletting heads with adjustable spacing and the ability to deactivate a specific head. Installed waste extraction system immediately after eyeletting. Cardboard thickness: 0.2-4 mm Throat depth: 300 mm Head spacing: adjustable from 70-320 mm Cycle time: 0.5 s The machine uses Hang No. 272 ​​rivets. Weight: 570 kg Nwodpfxozvgkxj Alfok Power supply: 380 V The cycle is initiated by a foot pedal. Eyelets included.

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Manufacturer: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other. Njdpfewm Iy Eox Alfjwk Operating Principle The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle. Applications Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.

Condition: excellent (used), functionality: fully functional, Year of construction: 2014, Operating hours: approx. 22,800 h Laser on: approx. 40,100 h Voltage: 400 V Frequency: 50 Hz Nodoyyygkopfx Alfowk Power: 3,200 W

Condition: used, Year of construction: 1988, functionality: fully functional, machine/vehicle number: 49C7264, 8-spindle automatic lathe (90), make Schütte, model AF32, year 1988, SN 49C7264, bar feeder by Pietro Cucchi with integrated chip conveyor, with C-axis and control, make Siemens, model Sinumerik System 3 Nedpjy Drclefx Alfjwk

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, laser type: fiber laser, pipe diameter (max.): 9,000 mm, input voltage: 380 V, input frequency: 50 Hz, type of cooling: water, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, model: GS-HG Maximum length of pipe: Nwedpfxewwqvwe Alfjk

Condition: good (used), Cutter knife, dicer, multi-purpose cutter, slicer and portion cutter, cutter knife, cutter knife, dicer, bacon cutter, gate, cutting gate -Manufacturer: Holac, cutting blade for meat cutter multi-purpose cutter dicer -Type: 3 cutting blades, see photos Nodpfx Aewzhhxolfowk -Hole: Ø 30 mm -Dimensions: 430/310/100 mm -Weight: 22.9 kg

Condition: good (used), Year of construction: 1974, TOYOSK 01BB Fixed 12 Multi Spindle Machine Nwedpfx Aovbcydolfok Manufacturer: TOYOSK Type: 01BB Year of manufacture: 1974 Spindle: 12 Bore: 6mm, 12 points simultaneously Feed: 100mm Speed: 2-speed (2500 / 2850rpm) Spindle diameter: 19-23 mm Table size: 350 x 450 mm Spindle speed: 2200-450 mm Power: 1.5 kW Application: Simultaneous drilling of multiple holes in precise, mass production tasks (e.g. automotive parts, sheet metal, castings)

Condition: ready for operation (used), Machine in good operating condition Nwodpsy Rnnqjfx Alfok

Condition: excellent (used), Year of construction: 2011, The grinding machine is in very good condition and fully operational. Nwodpfx Asyuyucolfok

Condition: good (used), Year of construction: 2003, functionality: fully functional, Bored to Ø 36 mm 6 spindles KADIGO tool monitoring system Njdpfx Ajzdttiolfewk with IEMCA PRA 52/42 F bar loader (4m bars) Accessories

Condition: used, Year of construction: 2019, functionality: fully functional, feed length X-axis: 318 mm, feed length Y-axis: 51 mm, feed length Z-axis: 584 mm, number of spindles: 2, spindle speed (max.): 4,500 rpm, spindle bore: 51 mm, Equipment: cooling unit, documentation/manual, The DS-30Y Y-axis turning center combines turning with two spindles, a Y-axis, a C-axis, and powered tooling to create a powerful “one-hit” solution for any workshop. Milling, drilling, and off-center threading can be enhanced for increased machining capabilities. It comes standard with a 12-station BMT65 turret and a synchronized C-axis for versatile 4-axis capabilities. Counter spindles support fully synchronized rotation and enable workpiece transfer during operation to reduce cycle times. Spindle | CHUCK-10"-A2-6 Nwodpfxszvy D Eo Alfsk 4.8K-20HP-A2-5-DS | CHUCK-8.3"-A2-5 LT-BMT65-12 Live Tooling 4000 rpm CONVEYOR ATP Automatic Tool Presetter PCAT Part Catcher HPC High-Pressure Coolant CABCOOL NGC | 1GB, ETHERNET, WIFI, EPFDM SO, MACRO, RTAP, 8M

Condition: good (used), Year of construction: 2001, functionality: fully functional, 6 spindles KADIGO tool monitoring system with IEMCA PRA 52/42 F bar feeder (4m bar length) Accessories Nodpszdtn Tsfx Alfswk

Condition: good (used), Year of construction: 2014, functionality: fully functional, using Stäubli robots Nwsdpfx Alezuc T Tsfsk Specifications, information, price, images, etc. can be found in the PDF documents attached.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, URBAN AKS 6410/4 four-head welding machine, from right to left, maximum welding dimensions: 2,700 × 2,500 mm, Windows control system, weld bead limit of 0.2 mm for coloured profiles, previously operated on a single shift, technically refurbished and fully functional. Nodpfxeznwq Te Alfswk

Condition: used, Multi-spindle drilling machine Maggi BS 35 2/26. Nwsdpfxezkh Rcj Alfok

Condition: ready for operation (used), * Brand: Kleemann Nwjdpsywmncjfx Alfsk * Surface: length 5200 mm, width 2000 mm - 3 decks * Incl.: 18,5 kW E-Motor.

Year of construction: 1995, condition: good (used), 3 drilling heads with 21 spindles each Nwedpfx Aloih H Epjfsk 1 horizontal 21 spindles 2 vertical 21 spindles pneumatic clamps

Condition: used, Year of construction: 2010, - Perfect for surface finishing - Constant working height - Q/L/Q Fine/cross-sanding machine Manufacturer: Weber Type: KSF-3-1350 Year of manufacture: 2010 Technical data - Equipped with 3 sanding belts for high-quality fine, veneer, and high-gloss sanding. - With a constant working height Machine frame - Heavy-duty steel welded construction for mounting 3 sanding units - Constant inlet height of 900 mm - Control and sanding belt change side on the inlet side, on the left - Stepless feed speed of 3-18 m/min, frequency-controlled. - Vacuum version of the conveyor belt / with 1 vacuum blower 5.5 kW, and a vacuum channel up to the upper edge of the machine Unit 1: Cross-belt unit - Pressure pad belt with felt and graphite for long service life - ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blowing device Unit 2: CBF combination unit - One grooved rubber contact roller 0 130 mm, rubber hardness 60 Shore - One cross-running flap band with separate drive 4.0 kw - ISA segmented pressure bar system with 11 mm workpiece detection and 22 mm pressure pad width (counter-rotating) - Workpiece-controlled oscillating sanding belt blowing device Unit 3: Cross-belt unit - ISD segmented pressure bar system with 11 mm workpiece detection and 44 mm pressure pad width - Workpiece-controlled sanding belt blowing device Operator terminal SIEMENS" MP 377 12" Multi-Panel - Graphical user guidance via 12" color display - Program memory with 300 programs - Setting of all parameters via program WEBER i-Touch control Nsdszuzctjpfx Alfswk - One rotary knob for navigating through the most important functions WEBER AWDM - Automatic thickness adjustment at the machine inlet with start switch Overthickness - Selector switch at the machine inlet with the following functions: - Automatic lifting of the contact roller and the segmented pressure bars - Feed stop ISA/ISD control - High-resolution workpiece detection in a 22 mm grid - Free loading of complex part shapes - Multiple loading with a small lateral distance - Sanding intensity individually adjustable at all edges - Sanding pressure adjustable via program ISA segmented pressure bar system (Unit 2) - Pressure pad movable in the longitudinal and transverse direction ISD segmented pressure bar system (Unit 1+3) As ISA, but additionally with - Separate adjustable pressure for the edge area (higher or lower) - Optionally only on the outer edge or outer and inner edges - Longitudinal and transverse edges or only longitudinal edges can be adjusted Workpiece blowing device - with WEBER ES system - Energy-saving, workpiece-controlled workpiece cleaning with single slider control WANDRES-Micro-Cleaning (single brush version) - Power sword brush with integrated micro-humidification of the linear brush (for optimal paint dust removal) Technical data - Working width: 1350 mm - Drive Unit 1 (frequency-controlled-Eco-Drive): 15.0 kW - Drive Unit 2 (frequency-controlled-Eco-Drive): 20.0 kW - Drive Unit 3 (frequency-controlled-Eco-Drive): 15.0 kW - Drive CBF: 3.0 kW - Drive vacuum blower: 5.5 kW - Drive feed (frequency-controlled): 3.0 kW - Drive height adjustment (frequency-controlled): 0.75 kW - Sanding belt speed (frequency-controlled): approx. 3-20 m/s - Sanding belt dimensions cross belts (W x L): 2x150x5100 mm - Sanding belt dimensions wide belt (W x L): 1370x2620 mm - Workpiece thickness (min./max.): 4-140 mm - Working height (constant): 900 mm - S

Condition: repair required (used), Year of construction: 2001, CNC-controlled wood lathe – processes 3 parts simultaneously. No controller included. Control cabinet without a computer; the attractive price without control should be taken into consideration. Technical specifications: Maximum working length: 1200 mm Nwedpfx Alef Ezgqjfsk Maximum square section: 100 x 100 mm 3 parts processed simultaneously Programmable template Fagor control Designed for high productivity.

Condition: good (used), Code: 0318 Brand: BIESSE Model: F 39 E - CE Standard Electronic multiple boring machine with 39 spindles for furniture, carpentry, custom-made furnishings, panels, kitchens, bathroom furniture, doors,window frames, and various - CE Standard Suitable for horizontal and vertical drilling, any intermediate drilling between 0 and 90° can be performed thanks to a gear motor and handwheel. Electronic control Technical data: N° 39 spindles Spindle rotation speed 4000 rpm Center distance between spindles 32 mm Max drilling center distance 1216 mm Drilling depth 65 mm Drilling head motor power 2,3 + 2,3 Hp Air operating pressure 6 bar Nedpfx Ajy Tt Rpelfswk Installed electrical power 4,1 Kw Overall dimensions mm 1800 x 1140 x 1600 h Weight kg 700 MACHINE SOLD UNDER THE CONDITIONS IN WHICH IT IS FOUND NOT RECONDITIONED

Condition: ready for operation (used), Machine in good operating condition Nwjdpfx Alsy Rnl Aefsk

Condition: ready for operation (used), Machine in good operating condition Nsdpsy Rnkrofx Alfewk

Condition: good (used), Year of construction: 1997, functionality: fully functional, Stürtz horizontal 4-head welding machine for welding plastic components. Welding dimensions: 2600 x 3000 mm Weld bead height limit: 2.0 mm (adjustable to 0.2 mm) Suitable for welding entrance doors. Penetration depth: 6.0 mm Nwsdpfszfky Njx Alfsk Operation via PC Jetter (Dell PC conversion kit)

Condition: used, machine/vehicle number: 7F001-7, Optical multi-sensor measuring machine HEXAGON OPTIV CLASSIC 321 GL tp Year of manufacture: probably 2015 Machine number: 7F001-7 Availability: Immediately (by arrangement) Payment terms: Prepayment - by bank transfer Internal No.: OCU2 Can be inspected while powered on: YES Technical data: Metrology software: PC-DMIS Vision Vision sensor for non-contact measurement of smallest and precise components CCD camera with 6.5x motorized CNC zoom DC servo motors Modular probe changer: TESASTAR Linear guides in all axes Coaxial LED top light (white LED) LED back light (green LED + diffuser) Multi-segment LED ring light Maximum feed rate in the X, Y, Z axis: 160 mm/s Maximum workpiece weight: 20 kg Measuring resolution: 0.05 µm Measuring accuracy in the X, Y axis (optical sensor): Ex, Ey = (1.6 + L/250) µm Measuring accuracy in the XY axis (optical sensor): Exy = (2.0 + L/250) µm Measuring accuracy in the Z axis (optical sensor): Ez = (3.9 + L/200) µm Measuring accuracy in the X, Y axis (scanning probe system): Ex, Ey = (2.0 + L/250) µm Measuring accuracy in the XY axis (scanning probe system): Exy = (2.5 + L/250) µm Measuring accuracy in the Z axis (scanning probe system): Ez = (2.9 + L/200) µm Measuring volume optical sensor X 300 mm Y 200 mm Z 150 mm Measuring volume tactile sensor X 230 mm Y 200 mm Z 150 mm Scope of supply: - As shown in the pictures Note: The rolling shutter cabinet on which the PC is placed is not included in the scope of supply. Dimensions & weights: Installation dimensions L x W x H approx.: 705 x 986 x 890 mm Weight approx.: 170 kg ⚠️Additional notes: ►The goods are sold with exclusion of any warranty ►Technical data without guarantee Nwodpfxozk I T Rs Alfok ►Subject to prior sale ❗The sale of the goods is exclusively to business customers❗

Condition: used, Year of construction: 1998, functionality: fully functional, machine/vehicle number: 23109, CNC 6-Spindle Lathe Index MS42C Year of manufacture: 1998, Serial number 23109 Nwjdpsyzicwsfx Alfjk Control: Index Bar loader: Index/Hydag Maximum bar diameter: 42 mm Chip conveyor and fleece filtration system: Knoll CO2 extinguishing system: Kraft & Bauer ----- Attractive Offer – Flexible & Worry-Free We not only offer you a high-quality product, but also tailor-made financing solutions that suit your needs. Whether you prefer a down payment, installment plan, or custom financing model – together we will find the right solution. Upon request, we will also handle the entire transportation logistics for you. From planning to reliable delivery, we ensure a smooth and timely process so that you don’t have to worry about a thing. 📞 Please contact us for further information or a non-binding quote. We offer you professional and personalized advice.