Used Niko Pocket Can Filler for sale (26,472)

Condition: good (used), Vacuum Filler Line Make: Handtmann Model: VF200 Iiodpfx Absznkfdjmsf Complete with loader *With Handtmann Meatball forming attachment*

Condition: ready for operation (used), Vemag vacuum filler, Model Robot 500 With portion control Iiedey N Skaepfx Abmef Twin stainless steel augers Will continuous straight fill With portion weights With PC 878 controls

Condition: ready for operation (used), Used can manufacturing line for the production of 73 mm or 99 mm cans. Several compositions of machines are available. Consisting of: - Krupp Sdvt duplex slitter Iedpfx Ajvy Tyxobmeif - Soudronic FBB400 welding machine - Soudronic inside powder coating system - Outside lacquering system - Frei curing oven - Metalbox 65d spin flanger - FMI A304 beader - FMC 652 seamer

Condition: ready for operation (used), Can diameter range: 50 mm - 100 mm Can height range: 28mm - 120mm Iodpfx Aswnriaobmoif Capacity: up to 200 cans per minute Tooling for approx.: 73mm No. or seaming heads: 6 No. of filling pistons: 16 Single knive member separator Driven lifters Siemens touchscreen

Condition: ready for operation (used), Used can manufacturing line for the production of 153 mm milk powder cans. Optional can be quoted for other can sizes as well or can be set to 153 mm food cans. - Krupp Sdvt duplex slitter - Soudronic SBW150 welder - Free outside lacquer Iisdpfxovy Txzs Abmof - Precision tools gas curing oven - Blema KEBS 160 flanger - Klinghammer SIA 180 beader - Angelus 50p seamer

Condition: good (used), functionality: fully functional, Lubeca LW792 filler and LW303 seamer Diameter range: 50 - 160 mm Height range: 65 - 300 mm Iiodpjtqmwgsfx Abmef Production capacity: up to 70 c.p.m. Tooling for approx.: 160 x 90 mm Lubeca LW792 can filler Lubeca LW303 can seamer

Condition: used, Year of construction: 2008, Overview This NIKO VP11e is a horizontal pneumatic (membrane) press for whole or destemmed grapes, built in 2008 by NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia). The press is made entirely of stainless steel and runs a fully automatic, multi-stage pressing program once started: grapes are loaded through the two perforated cylinder doors or axially, an internal membrane inflates against the load to extract juice at progressively increasing pressure, and the cylinder rotates between stages to break up ("crumble") the pressed cake ahead of the next drain cycle. Juice drains into a wheeled collection pan under the cylinder with a pump connection; pomace is discharged by rotating the open door face-down over the pan. The press is mounted on castors for repositioning and remains still installed and under power at the seller's winery in Spain. It can be inspected in operation on request. Technical data - Manufacturer: NIKO (Nikolaj Šraml s.p., Podnanos, Slovenia) - Model: VP11e - Year of manufacture: 2008 - Machine type: horizontal pneumatic (membrane) press for grapes, mobile on castors - Cylinder volume: 1,100 L (cylinder Ø 920 mm) - Juice drainage pan (tina) volume: 450 L - Loading doors: 2, 640 x 420 mm each - Max. working pressure: 1.7 bar - automatic multi-stage program (pre-press 0.3 bar, then 0.8 / 1.2 / 1.7 bar for whole white grapes; 0.3 bar, then 0.8 / 1.2 bar for destemmed, fermented red grapes) - Integrated blower for membrane aspiration: -0.2 bar vacuum / +0.2 bar pressure - Power: 2.9 kW, single-phase 230 V (1/N/PE), 50 Hz - Mechanical protection: IP55 - Noise level: < 75 dB - Dimensions: approx. 2,520 x 1,270 x H 1,560 mm (with axial loading extension; 2,350 mm long without it) - Weight: approx. 430 kg Equipment - Pneumatic membrane pressing cylinder with integrated aspiration blower - Wheeled juice drainage pan with pump connection - Electric control panel with automatic pressing programs (incl. draining cycle) - Axial loading option - Safety guard on drive elements, door interlock switch and STOP switch Iisdpfjzk Eqmsx Abmsf - OEM operating manual (Spanish) Condition Used - still installed and under power at the seller's winery. No further condition report has been provided by the seller; the machine can be inspected in operation on site. Availability Immediately. Location: Spain. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: as good as new (ex-display), Year of construction: 2024, Fully automatic can seamer for round cans, configured with a can format of your choice. Can be converted to handle different can diameters; additional accessories available upon request. Currently, a machine for 73 mm cans is in stock. Iodpfxetuqb So Abmoif Used, manufactured in 2024. Output of up to 45 cans per minute.

Condition: ready for operation (used), functionality: fully functional, power: 18.39 kW (25.00 HP), overall weight: 650 kg, fuel type: gasoline, color: orange, fuel: super 95, Year of construction: 2009, operating hours: 1,123 h, Remote-controlled caterpillar mower: - Niko - Roboflail One - Year of manufacture 2009 - 1,123 operating hours - 650kg - 170cm x 180cm x 110cm (lxwxh) - max gradient: 70% - 2-sickle mower - 25hp Kawasaki engine - Radio remote control (range 300m) Isdpfxstt N Uco Abmeif - Municipal machine from 1st hand Receive all new vehicles by email - subscribe to our NEWSLETTER! Errors and typing errors possible, subject to prior sale!

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: NVT, type of input current: DC, warranty duration: 24 months, overall weight: 30 kg, filling weight (max.): 30,000 g, input voltage: 220 V, pressure: 2 bar, tank capacity: 30 l, New filling machine that can be used for filling liquids. This includes: Milk Water Alcohol Disinfectant Etc. A very robust machine that operates on air and 220V, plug and play! Ideally suited for filling small batches. A very small compressor is sufficient to get this machine running. This can also be supplied with the machine. For this, we recommend a minimum 12L version. The filling machine has a 1000ml cylinder, allowing it to fill a maximum of 1000ml per stroke. By having the machine perform multiple strokes, multiples of this amount can also be filled easily. For example, 2500ml can be filled by performing two strokes of 1250ml each. The smallest stroke is 100ml, and any amount between 100 and 1000ml can be filled in a single stroke. We also have models with a cylinder that can fill up to 5000ml per stroke. Equipped with a suction hose, allowing the machine to draw directly from a drum or IBC. The machine is equipped with a foot pedal and an automatic mode. In automatic mode, the machine continuously fills, allowing for easy and quick filling of larger quantities. The foot pedal allows filling at your own pace. Depending on the operator and the amount of milliliters, between 15 and 25 units can be filled per minute. This makes it a very fast machine. The machine weighs approximately 15/20kg and can be easily placed on a table. It is entirely made of stainless steel, making it a very high-quality machine. Iiedpforivxcsx Abmjf If you have any questions, please email us, and we will be happy to assist you with this or another machine. We also have a labeling machine that is a very good complement to the filling machine. We strive to respond to you within 24 hours. We are also available by telephone. We are happy to assist you on working days between 08:30 and 17:00.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: CDE:D09C236, CORIS /HERMES 9600 Vial Blower & Filler Line, made in France. Consisting: Iijdpfxsrtnlaj Abmjf - a bottle pack blowing machine, with 2 formats (60ml and 30ml), - a HERMES 2009 filling machine with 2 drive rings 10 slots, - a cap dispenser, - laminar flow, - spare parts, - belt conveyor 2200mm x 40mm, sold without peristaltic pump. YOM 2010 EXCELLENT CONDITION

Condition: excellent (used), For sale: complete German-made measurement kit for diagnostics and machine setup, ideal for service, production, and inspection applications. The kit includes: • ROTUX Pocket Strobe™ stroboscopic lamp • Operating range: 30 – 12,500 FPM (flashes per minute) • Built-in display and adjustment dial Iiodpfxsupuk He Abmjf • Battery powered (ANSMANN charger included) • Original case with foam insert Additionally: • HOLEX dial indicator 0–10 mm, accuracy 0.01 mm • NOGA magnetic base with adjustable arm • Set of adapters and holders • Mounting elements and cables • All components in excellent technical condition, from a working workshop Manufactured in: Germany Condition: very good, complete set, not worn out ⸻ Ideal for service technicians, precision mechanics, or for monitoring rotational movement, shaft alignment, vibration, or synchronization in drive systems. The ROTUX lamp is a professional tool, not a Chinese replica.

Condition: reconditioned (used), empty glas/jar cleaner Make: Niko Iisdpsicnp Rjfx Abmef Typ: 036/38 Diameter container: 60 - 165mm Hight container: 50-300 mm Capacity: 12.000 container/Hr Frame: Stainless steel 1.4301 (AISI 304) in/outfeed conveyor Hight: 900 mm + 50 mm Dimensions: L x W x H = ca. 4.400 x 1.450 x 2.300 mm Features: In/ outfeed conveyor option to clean with air or water Electric cabinet with Siemens S7 SPS and Siemens Touch-panel Safety housing as-is or tested and adjusted to customer needs

Condition: used, power: 7.35 kW (9.99 HP), fuel type: diesel, overall weight: 800 kg, empty load weight: 700 kg, Year of construction: 2008, operating hours: 70 h, Equipment: additional headlights, Tracked chassis manufacturer: NIKO Max. speed: 4.8 km/h forwards, 4.8 km/h reverse Year of manufacture: 12/2008 Operating hours: 70 Hatz 1B50 T-4 air-cooled four-stroke diesel engine, 7.6 kW ≙ 10.36 HP (Separate) generator for power generation integrated into the chassis, making stand-alone operation possible even without the box body (decontamination module), 230/400 V power supply Generator manufacturer: GTS, 400/230 V, At 400 V = 6.4 – 8 kW; 11.6 A; 8 KVA At 230 V = 4 – 5 kW; 21.7 A; 5 KVA Single-lever control for driving and steering Hydrostatic drive Electric starter Hand winch Headlights Iodpfx Abjx Edckemsif Folding driver’s platform Parking brake Chassis operating voltage: 24 V Decontamination module 4 (box body): Kärcher HY 10/8; equipment: TEP90, fresh and waste water tanks, spray and suction pump, electric tank heater (water heating) Box body can be tilted and removed using spring bolts and 380 V plug The vehicle was intended for the Bundeswehr to decontaminate vehicle interiors. Only used for training purposes. Unladen weight: 700 kg Gross weight: 800 kg Body weight: 240 kg Length: 1.85 m Width: 0.80 m Height: 1.40 m (with pallet) Further attachments possible: stake frame, skip body, flatbed, etc. Operating hours as per display Vehicle preferably sold to commercial users or for export, private sale conditional. Sold without warranty. Net price for export Net: 6,800 EUR + (19% VAT) 1,292 EUR = Gross: 8,092 EUR The above information is non-binding; errors, changes, and prior sale reserved! Export license required. Tel: 08026/2188

Condition: used, power: 7.35 kW (9.99 HP), fuel type: diesel, overall weight: 800 kg, empty load weight: 700 kg, Year of construction: 2008, operating hours: 70 h, Equipment: additional headlights, Crawler chassis manufacturer: NIKO Maximum speed: 4.8 km/h forward, 4.8 km/h reverse Iodex Edcdopfx Abmsif Year of manufacture: 12/2008 Operating hours: 70 Hatz 1B50 T-4 air-cooled four-stroke diesel engine, 7.6 kW (approx. 10.36 HP) (Separate) generator for power supply, integrated into chassis, therefore can be used autonomously without superstructure (decontamination module); 230/400 V Generator manufacturer: GTS, 400/230 V At 400 V: 6.4 – 8 kW; 11.6 A; 8 KVA At 230 V: 4 – 5 kW; 21.7 A; 5 KVA Single-lever control for drive and steering Hydrostatic drive Electric starter Manual rope winch Headlights Folding driver platform Parking brake Operating voltage chassis: 24 V Decontamination module 4 (superstructure): Kärcher HY 10/8; Features: TEP90, fresh and wastewater tank, spray and suction pump, electric tank heater (water heating) Superstructure can be tilted and removed using spring bolts and 380 V connector The vehicle was intended for the Bundeswehr for decontaminating vehicle interiors. Only used for training purposes. Unladen weight: 700 kg Gross weight: 800 kg Superstructure weight: 240 kg Length: 1.85 m Width: 0.80 m Height: 1.40 m (with pallet) Further attachments possible: stake frame, skip container, flatbed, … Operating hours as per display Vehicle preferably sold to businesses or for export, private buyers subject to conditions Sold without warranty Net price for export Net: 6,800 EURO + (19% VAT) 1,292 EURO = Gross: 8,092 EURO The above information is non-binding. Errors, changes and prior sale reserved! Export approval required Tel: 08026/2188

Condition: used, power: 7.35 kW (9.99 HP), fuel type: diesel, overall weight: 800 kg, empty load weight: 700 kg, Year of construction: 2008, operating hours: 70 h, Equipment: additional headlights, Tracked Undercarriage Manufacturer: NIKO Max. speed: 4.8 km/h forward, 4.8 km/h reverse Year of manufacture: 12/2008 Operating hours: 70 Hatz 1B50 T-4 Air-cooled Four-stroke Diesel Engine, 7.6 kW ≙ 10.36 HP (Separate) generator for power supply, installed within the undercarriage, making autonomous operation possible even without the body structure (decontamination module); 230/400 V Generator Manufacturer: GTS, 400/230 V At 400 V: 6.4–8 kW; 11.6 A; 8 KVA At 230 V: 4–5 kW; 21.7 A; 5 KVA Single-lever control for driving and steering movements Hydrostatic drive Electric starter Hand-operated cable winch Headlights Foldable driving platform Parking brake Operating voltage undercarriage: 24 V Decontamination Module 4 (enclosed body): Kärcher HY 10/8; Equipment: TEP90, Fresh and waste water tanks, spray and suction pump, electric tank heater (water heating) Body structure tiltable and removable by spring bolts and 380 V plug The vehicle was intended for the German Armed Forces (Bundeswehr) for decontaminating vehicle interiors. It was only used for training purposes. Unladen weight: 700 kg Iijdpfxox Edb Ho Abmef Gross weight: 800 kg Body weight: 240 kg Length: 1.85 m Width: 0.80 m Height: 1.40 m (with pallet) Additional attachments possible: stake body frame, tipper body, flatbed, etc. Indicated operating hours as per display. Vehicle preferably sold to businesses or for export; private sales subject to reservation. Sale without warranty. Net price for export: Net: €6,800 + (19% VAT) €1,292 = Gross: €8,092 The above information is non-binding. Errors, changes and prior sale reserved. Export license required. Tel: 08026/2188

Condition: excellent (used), Year of construction: 2016, BAG-IN-BOX SEMI AUTO FILLING MACHINE Smurfit Kappa Vitop, ITALY, 2016 Bag filling volume from 1L to 28L Iodpfjyr Awbjx Abmjif Pouch-up filling volume from 1L to 3L Touch screen control panel The semi-automatic filling machine Vitop has been designed to fill liquid and semi-liquid products in bags and pouches. Improved shelf-life of liquid thanks to revolutionary filling valve that separates vacuum and nitrogen circuits Easy to operate and maintain Precise electromagnetic flowmeter for filling accuracy Hygienic: Equipped with a cleaning a sanitizing program Suitable for Vitop® Original and Vitop® Compact Simple to adjust between sizes Optional laminar air flow for filling in ultra clean conditions Especially well-suited to medium and Pouch-Up® fillers, the semiautomatic filling machine Vitop offers excellent performances and reliability. The filler uncaps the tap, inhales air from the bag before filling, fills the bag/pouch with the required quantity of liquid and recaps the tap. Nitrogen is inflated at the end of the cycle in order to better preserve the product inside and help to clean the valve neck. An airflow hood (option) provides mechanical decontamination around the filling body area through overpressure.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, 1 x Cimec America Rinser, 8-Head Filler and Capper. Iiodpsy Um Anofx Abmsf This is a compact, automatic monoblock bottling system equipped with 9 x rinsing nozzles, 8 x isobaric (counter-pressure) filling valves, and 1 x capping head. It is highly engineered for rinsing, filling, and crowning still and carbonated beverages. Manufacturer – Cimec S.r.l. Type - AM/DPS 9/8/IC/IVA. Date of manufacture - 2004. Equipment Included: • Rinser, filler and ROPP capper integrated. Crown capper is currently disabled. • All conveyors and drive motors – both ends. • Various change parts including 200ml and 330ml (currently installed). Output speed - Capable of up to 1,800 bph, depending on the bottle volume and product type. Overall dimensions - 3.5 m long x 1.4 m wide x 2.6 m high (approx.). Last in production in August 2025.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,100 mm, total width: 1,100 mm, total length: 1,300 mm, overall weight: 800 kg, REF: MM5446 Borelli Group S.r.L. inline rotary filling machine suitable for filling glass bottles. Iodpfxox Dbkcj Abmoif This is a standard 10-head rotary filler with complete CIP kit for cleaning, including dummy bottles and washing spray system. Also supplied with filler in-feed scroll and bottle handling parts for Bordeaux glass bottles. Technical specification: ✅ Manufacturer - Borelli Group S.r.L ✅ Model - RMC10. ✅ Date of manufacture - 2018. ✅ Speed - up to 1500 bottles/hour (for 750ml bottles). ✅ Throughput - 1300 litres/hour. ✅ Filling system - Pure gravity. ✅ Speed variator - Inverter. ✅ Voltage - 415 V / 50 hz / 3 phase. ✅ Pneumatic supply - 3-6 bar.

Condition: used, Year of construction: 1994, Overview This Ortmann + Herbst Hansa B 100/20 is a rotary filler-capper monoblock for glass bottles, originally built in 1994 and completely refurbished in Germany in 2013. It combines 100 filling valves with a 20-head aluminium screw capper in a single machine and reaches up to 30,000 bottles per hour with 750 ml glass bottles. The 2013 refurbishment covered the machine's controls, drive and guarding: a new electrical system with Siemens S7 control and a Siemens SIMATIC MP377 12" touch panel, a new main bearing, and a new safety housing around the machine. Two change part sets are included, for 250 ml and 750 ml bottles. The machine is still installed and under power, so it can be inspected in its production environment. Iijdezu Iaxepfx Abmsf Technical data - Manufacturer: Ortmann + Herbst - Model: Hansa B 100/20 - Year of manufacture: 1994, completely refurbished 2013 - Machine type: rotary filler with screw capper, glass bottles - Filling valves: 100 - Capping heads: 20, for aluminium screw caps - Pitch: 115 mm - Capacity: up to 30,000 bph with 750 ml glass bottles - Control: Siemens S7 with SIMATIC MP377 12" touch panel (2013) - Change parts: two sets, for 250 ml and 750 ml bottles Equipment - New electrical system with Siemens S7 control and touch panel (2013) - New main bearing (2013) - New safety housing around the machine (2013) - Cap sorter with feed chute for aluminium screw caps - Two change part sets: 250 ml and 750 ml bottles Condition Used - refurbished. Built in 1994 and completely refurbished in 2013, including the electrical system, the main bearing and the safety guarding. Still installed and under power; the machine can be visited and inspected on site. Availability From 2 November 2026. Location: Germany. Preparation, dismantling and truck loading by the seller (EXW loaded). The machine can be visited on request.

Condition: used, Year of construction: 2011, Overview This isobaric filler was manufactured in 2011 by the German company ICS (Industrial Control Systems). The multiFILL-VST (EP) 960-24-240-6KK-6SV-125.6 model is a high-precision filling system equipped with 24 electro-pneumatic filling valves featuring double pre-evacuation, ensuring low oxygen pickup and optimal filling performance for beer and other carbonated beverages. The monobloc system includes both a 6-head crown capper and a 6-head screw capper, offering flexible closure options. The machine has 7,200 operating hours, is in very good condition, and offers a maximum capacity of 6,000 bottles per hour. Technical data - Application: Beer and other carbonated beverages - Capacity: 6,000 bph - Filling Valves: 24, electro-pneumatic with double pre-evacuation (VK-EP-2V) Iiedpfsyb Silox Abmjf - Ring Bowl Diameter: 960 mm - Capping Heads: 6 × crown cork (KK) + 6 × screw cap (SV) - Pitch: 125 mm - Operating Hours: 7,200 h

Condition: ready for operation (used), Year of construction: 1968, A mechanical Karges-Hammer eccentric press for series production in can manufacturing is available. Ram stroke: 75mm, flywheel speed: 80rpm, motor power: 3HP, speed: 294rpm. An on-site inspection is possible. Iodpey Ndfpefx Abmjif

Year of construction: 1973, condition: ready for operation (used), An FMI separating machine for can production is available. Production capacity: approx. 500cans/min, diameter range: 52mm-99mm, height range: 40mm-85mm. An on-site inspection is possible. Iiodpey I Adzsfx Abmsf

Condition: ready for operation (used), Year of construction: 2012, A large-format can filling and closing machine JBT FoodTech from the food industry is available. Can weight: 750g/1000g, can content: sweetened condensed milk, max. throughput capacity: 600cans/min, filling heads: 22, closing heads: 5, design: monoblock, control system: Siemens. Documentation available. An on-site inspection is possible. Iodpfx Aboy N Uv Someif

Condition: ready for operation (used), Year of construction: 1987, A fully automatic Ferrum can filling and sealing machine is available. Can weight: 397g, can content: sweetened condensed milk, sealing heads: 6, throughput capacity: approx. 250cans/min, machine dimensions X/Y/Z: approx. 2300mm/1550mm/2300mm, weight: approx. 3500kg. The filling bowl has been repaired several times. Documentation available. An on-site inspection is possible. Expected to be available around September 2026. Iijdey N Uvxjpfx Abmsf