Used Nko Pasovec 75 Runner for sale (7,869)

Condition: ready for operation (used), functionality: fully functional, Material thickness: 3 – 35 mm Cutting speed: variable, max. 1.8 m/min Minimum material length at edge: 60 mm Maximum edge width: 12 mm (adjustable) Edge head motor power: 400 W Edge head: resharpenable Edge angles: 30°, 45°, 22.5°, 37.5°, 50° Dimensions: 470 x 294 x 523 mm Machine weight: 30 kg Kdjdjyk U I Ajpfx Ag Aju

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, Heidelberg Speedmaster XL 75 - 4 + L X – 2019 Serial Number : LS001736 Year of Manufacture : 2019 Impression Count : Only 72 mio imp. ! 4 colors + coater offset press of size 53 x 75 cm (C-Size) equipped with: Kedpfx Agoyt H A Ro Aedu • PRINECT PRESS CENTER XL 2 • AXIS CONTROL 2 (Spectrophotometric colour measurement ) • AUTOPLATE PRO (totally automatic plate change) • COATING UNIT with chambered doctor blade and Anilox Roller (13 cm³ per m² cells) • Extended Delivery (X2) • Infra-Red Dryer • SPEED : Option 18.000 Sheets Per Hour • Preset PLUS Feeder & Delivery (full automatic Size Setting) • ALCOLOR dampening with VARIO • Technotrans Central Refrigeration CombiStar with Alcosmart • Ink Temperature Control • ALL Automatic washers (blanket, rollers and impression cylinders) • Air Transfer System • FilterStar • Steel Plate in feeder and delivery (for pallets) • Chromed cylinders • AIRSTAR PRO (Air Supply Cabinet) • Pneumatic compressor • PowderStar Weko AP 500 Powder Spray • Advanced antistatic device in feeder & delivery • Electronic double sheet and side lays control • Powder/process air suction CleanStar Compact • Air Cooled machine • Can print up to 0,8 mm Machine in very good condition… Available immediately Can be seen running, any print test welcome !

Condition: used, Year of construction: 2021, Chamber dryer for recycled plastics. Manufacturer: Creative Machine Building Center Year of manufacture: 2021 Power supply: 400 V Power: 75 kW Capacity: 700 kg/h (soft plastics) 1000 kg/h (hard plastics) External dimensions of the machine: - length: 4,000 mm - width: 1,500 mm Kdsdpfxoztzzgj Ag Aeu - height: 2,600 mm Includes a belt conveyor. Technical condition: used

Condition: new, Year of construction: 2023, functionality: fully functional, overall weight: 17,400 kg, power: 257 kW (349.42 HP), We offer this new Lindner Urraco 75 D twin-shaft shredder, manufactured in 2023. Kodpsz Sqzfofx Ag Aodu Serial number: 8185 Type: Urraco 75 D Year of manufacture: 2023 Power: 257 kW Weight: 17.4 t Magnet: 1.0 t If you have any further questions or require more information, please send us a message or call.

Condition: ready for operation (used), Year of construction: 1999, • Year 1999 • In our possession since 08/2024 • Quinto 4 software Ksdpozcvaqefx Ag Asdu • Electrostatic filter, Elbaron model • Numerous spindles • Recent maintenance performed: external cleaning and repainting, spindle overhaul, spindle belt replacement, brush and front plexiglass replacement, wheel and door rail replacement, machine measurement, offset adjustment, ball reference setting, backlash check, replacement of the air filtration and lubrication adjustment unit, replacement of 4 electric fans.

Condition: good (used), Year of construction: 1999, functionality: fully functional, grinding belt width: 100 mm, grinding belt length: 950 mm, Equipment: CE marking, A used, well-maintained DelNegro belt sanding machine, type: ISS 75/100. The machine is suitable for belt widths of 75 or 100 mm. Sanding can be performed horizontally or vertically. 19 belts, size 100x950, grit 80, are included in the scope of supply. Two belt speeds, dust extraction system. Technical data and dimensions: Subject to change. Kjdpfeywarhox Ag Asdu

Condition: used, Year of construction: 2004, Technical details: x-travel: 750 mm y-travel: 600 mm z-travel: 560 mm switched on hours: 78.328 h spindle hours: 38.073 h control: Heidenhain iTNC 530 tool changer with: 30 Plätze tool taper: HSK-A 63 feed speeds infinitely variable: 90 mm/min rapid traverse:: 90 m/min table-size: 950 x 650 mm table load capacity: 1000 kg Kedjzp Dvrspfx Ag Ajdu total power requirement: 73 kVA Weight approx.: 11,0 t dimension machine approx.LxWxH: 4,9 x 4,3 x 3,15 m The DECKEL MAHO DMC 75 V linear is a highly precise vertical CNC machining center equipped with linear drive technology, making it ideal for 3-axis machining. *

Year of construction: 1984, condition: refurbished (used), functionality: fully functional, drive type: V-snaren, Motor: 55 kW - 1500 RPM Tread die: 85 mm Kodpfx Agjz Arh Ne Ajdu Die diameter: 362 mm Equipped with a cut-off knife on the door Weight: 1440 kg 1 year warranty

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Inline Cutter/Emulsifier Brand: Inotec GmbH Model: I175CDI-75 Machine number: 103-00605 Year of manufacture: 2007 Voltage: 230/400 V, 50 Hz, 152 A Kdjdpfswxza Njx Ag Aju Power: 91 kW, 106 kVA Dimensions: 2000 mm x 900 mm x 850 mm With distribution cabinet Dimensions: 1200 mm x 600 mm x 2100 mm

Condition: excellent (used), Year of construction: 2007, machine/vehicle number: DN1741, Technical specifications: IHF - Quick Lift QLA 75-S-GM manipulator, handling device, lifting aid Load capacity at full reach: 75 kg, at the gripper: 25 kg Overall height: approx. 3.1 m Reach: approx. 2 + 2 m Kjdozv Hxpjpfx Ag Ajdu Lifting height: approx. 0.2 - 1.4 m Total weight: approx. 400 kg Swivel range: 270° + 90° (via articulated arm), connection to 400V 16A With a pneumatic magnetic gripper (16 magnets), you can pick up or position steel workpieces, thereby automating your process. The crane is dismantled and immediately available. The item is located in 75053 Gondelsheim. Other cranes are available, with load capacities of 80-5000 kg; please inquire. See pictures. Shipping via freight forwarder or collection by appointment only.

Condition: ready for operation (used), functionality: fully functional, fuel type: diesel, lifting height: 7,300 mm, Year of construction: 2005, operating hours: 4,655 h, Equipment: cabin, DIECI 30.7 Runner telescopic loader Year of manufacture: 2005 According to the hour meter: 4,655 hours 3-ton lifting capacity 7.3-meter lifting height Iveco engine - Includes bucket - Integrated hydraulic side shift - Joystick control - All-wheel drive - 3 steering modes - Cab with heating - Lighting system with turn signals - Additional circuits at the rear - Ready for immediate use! Kdsdpfoz Ixvbsx Ag Asu Selling price: €21,500 (net) Affordable delivery also possible!

Condition: like new (used), Year of construction: 2013, BLOW EXTRUDER HDPE Model EuroTruder 75 Made by Euro-Stel, Belgium YOM 2013 extruder: diameter 75x28 D - with neck sweder and granulate hopper mold is not included EXCELLENT CONDITION Kdsdpfx Agjwivdko Aeu

Condition: new, functionality: fully functional, machine/vehicle number: S.-Nr,: 20135, Brand new 24-zone hot runner controller, complete with all accessories as shown in the pictures. Kodpfxew N Rd Ds Ag Aodu

Condition: used, Year of construction: 2005, BAZ DMG milling machine cover V75linear (approx. 16,000 spindle hours), year of manufacture 2005. Kdodpfxoz Sn E Is Ag Aeu

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT23202019236, empty load weight: 5,675 kg, overall weight: 31,000 kg, axle configuration: 2 axles, first registration: 10/2026, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,030 mm, suspension: air, tire size: 435/50 R19,5", color: yellow, Year of construction: 2016, Fine-grain steel welded construction, fifth-wheel coupling plate with replaceable 2" kingpin - Slightly inclined outer frame with "Load-Lock-Profil" for securing straps - Note: When securing straps in conjunction with side boards, the side boards must be opened! - Single-side operation of landing legs, straight lower section, without thrust compensation - Side-mounted door retainers, aluminium side underrun protection, galvanised steel rear underrun protection - Heavy-duty pallet stop on both sides, approx. 20–25 mm high, lashing points every 200 mm; loading height reduced by approx. 20–25 mm - Spare wheel, same make as standard tyres - Plastic toolbox with drawer and shelf, W=650 / H=520 / D=670 mm, lockable with a padlock (padlock not included) # Axles and suspension - BPW disc-brake axles - Air suspension # Braking system - Dual-line compressed-air braking system - Spring-loaded parking brake - 2 misconnection-proof coupling heads at the front, without connecting lines Kdjdpfj Aay Sbjx Ag Aju - EBS electronic braking system with front EBS socket, without connecting cable - Warning: This trailer may only be towed by tractor units that ensure the effective operation of the ABS! - With raise/lower valve - Vehicle driving stability system # Wheels and tyres - 435/50 R19.5", make at manufacturer's discretion # Electrical system - 24 V, multi-chamber lights, yellow LED side lighting - Yellow LED side lighting with 20 LEDs per lamp - 2 white front position lights - 2 white/red rear outline marker lights - 2 x 7-pin and 1 x 15-pin misconnection-proof sockets at the front, without connecting cable - LED safety light, mounted at the top of the rear corner posts - Approx. 30 mm thick screen-printed floor panels, cross joints with Omega inserts, on longitudinal bearers for high point loads; maximum forklift axle load 7,100 kg # Front bulkhead / corner posts - 2,580 mm high, steel corner posts in high-volume design # Centre posts - Pair of sliding posts, movable along the full length, with four-way sockets and a long lower socket - Pair of post positions # Insert boards - 4 rows of aluminium V-shaped insert boards # Rear wall / corner posts # Curtain - Curtain with welded-in horizontal and vertical tensioning straps # Roof - Sliding roof, rear end lift-up section; roof can be slid from rear to front; L-shaped roof rail for the automotive industry; internal width between roof rails approx. 2,490 mm; curtain colour: white - EcoLift lifting roof, raises by approx. 380 mm, assisted by gas struts - Front with 2 driving positions: - Front internal height approx. 2,900 mm / 3,000 mm # Operating instructions - If the overall height exceeds 4,000 mm, please note the following: - The transport operator is solely liable for any resulting damage. - The driver transporting the vehicle must obtain a permit under Section 29 of the German Road Traffic Regulations (StVO). - We accept no liability for transporting the vehicles. - Note: The specified gross weight is technically possible; depending on the load, it may not be achievable while complying with the permitted axle and fifth-wheel loads. # Registration / plates - Germany - With DEKRA inspection and report - Load securing certificate to EN 12642 XL (valid only in conjunction with 4 rows of aluminium boards) - Additional DC 9.5 certificate, pallet stops on both sides, approx. 25 mm high; loading height reduced by approx. 25 mm; warning panel to ECE Regulation 70

Condition: good (used), Year of construction: 1997, For sale are 2 identical Atlas Copco screw compressors. Manufacturer: Atlas Copco Type: ZR 75 / 10 Serial Number: AIF 042705 = Compressor 1 Serial Number: AIF 053082 = Compressor 2 Operating Hours: 94620 h = Compressor 1 Operating Hours: 96461 h = Compressor 2 Voltage: 400 V Power (kW): 76 Air flow rate in m³/min: 10.4 Max. air pressure in bar: 10 Kdsdpfx Agez Rntis Asu Both compressors have been maintained by the manufacturer according to the maintenance schedule (reports available). After approximately 60,000 operating hours, a stage replacement was carried out on both units. The motor was also replaced on both compressors. The units are in good condition. Price: €6,900 per compressor Inspection is possible and encouraged (93499 Zandt).

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: 308, Technical characteristics: ⚙️ Core Specifications Attribute Value Thread Diameter Range: 3 mm to 75 mm Rolling Pressure: 0.5 to 20 tons Max Thread Length (Plunge): 160 mm Max Thread Length (Through): 2000 mm Speed Range: 24 to 114 rpm (8-step gearbox) Tool Diameter: 145 mm to 200 mm Roll Spindle Diameter: 54 mm Shaft Distance: 130 mm to 200 mm Machine Dimensions (L×W×H): 1880 (INCLUDING HYDRAULIC UNIT) × 991 × 1270 mm Weight: ~1.6 tons 🧰 Features & Capabilities Kdsdpfjxx Nuxjx Ag Aou Variable Rolling Pressure: Adjustable to suit different materials and thread profiles. Heavy-Duty Construction: Built for long-term industrial use with high repeatability. Manual or Semi-Automatic Operation: Depending on configuration and accessories. Machine status: WORKING

Condition: like new (used), Year of construction: 2026, functionality: fully functional, working width: 460 mm, area performance: 1,840 m²/h, overall weight: 25 kg, tank capacity: 4 l, total height: 1,154 mm, total width: 551 mm, total length: 446 mm, water tank capacity: 4 l,

Condition: good (used), functionality: fully functional, 6 PSG hot runner controllers for sale 3 individual units: €880 each Kjdpfjz Ndhlsx Ag Aodu 1 station with 3 units on a mobile frame: €2,400 for the complete station The three units of the station can be used together as a 24-channel control system or individually.

Condition: used, Year of construction: 2011, Various hot runner controllers, some with Harding connectors and cables. Some of the devices originate from a cleanroom environment in the medical technology sector. Kdodpfewqmqwex Ag Asu

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT23202020752, empty load weight: 5,545 kg, maximum load weight: 26,455 kg, overall weight: 32,000 kg, axle configuration: 2 axles, permissible axle load (axle 1): 10,000 kg, permissible axle load (axle 2): 10,000 kg, next inspection (TÜV): 02/2027, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,050 mm, suspension: air, tire size: 435/50R19,5*, tire condition: 56 %, color: yellow, Fine-grain steel welded frame; fifth-wheel plate with replaceable 2" kingpin Slightly angled outer frame with "Load-Lock-Profil" for lashing straps. Note: open sideboards to attach straps. 24 t two-speed landing gear, single-side operation, semicircular base, straight mounting plate, push compensation Without support legs Rear ladder Side door retainer Kodps Aaznkefx Ag Ajdu Galvanised steel rear underrun guard Quarter mudguards; separate rear corner impact guard Heavy-duty pallet stop both sides, approx. 20–25 mm high; lashing points every 200 mm; loading height reduced by approx. 20–25 mm Plastic toolbox with drawer and shelf, padlockable (padlock not supplied) # Axles and suspension BPW drum brakes Axle spacing 1810 mm; technical axle load 10 t Air suspension Without lift axle # Braking system Dual-line compressed-air brakes Spring-operated parking brake 2 non-interchangeable coupling heads at front EBS with front socket, without connecting cable Warning: tow only with tractor units ensuring ABS effectiveness! Raise/lower valve Trailer electronic stability system # Wheels and tyres 435/50 R19.5" Steel rims # Electrical system 24 V, multi-chamber lights, yellow side LEDs Number plate lights both sides 2 white front position lights 2 white/red rear outline marker lights Front: 2 x 7-pin and 1 x 15-pin non-interchangeable sockets; no connecting cable # Floor Approx. 30 mm anti-slip panels, transverse joints with omega inserts, on longitudinal bearers; forklift axle load up to 7100 kg 2580 mm steel high-volume corner posts; side-curtain release on headboard Removable centre posts 3 pairs of sliding posts along full length, four-way sockets and long lower pocket 3 pairs of post positions # Insertion boards 4 rows of aluminium V-shaped boards # Rear wall / corner posts Steel rear corner posts to roof underside; two-leaf rear portal doors, each with 2 internal locking rods # Curtain Curtain with welded horizontal and vertical straps # Roof Sliding roof, rear end lifts; slides rear to front; L-shaped roof rail for car transport; internal width between rails approx. 2490 mm; white curtain EcoLift lifting roof, raises approx. 380 mm on both sides, gas-strut assisted; 3 front driving positions: internal height approx. 2900/2950/3000 mm; set to 2900 mm # Registration / signs Germany EN 12642 XL load-securing certificate (valid only with 4 rows of aluminium boards) Additional DC 9.5 certificate; pallet stop both sides, approx. 25 mm high; loading height reduced by approx. 25 mm Yellow reflective strips continuously along bottom of side curtains Red reflective strips around rear portal Archive images! Vehicle may still be in use!

Condition: good (used), functionality: fully functional, tested machine : Power 75 tons Stroke rate 90 strokes Kedpszq Sp Asfx Ag Asdu throat depth 300 mm ram stroke 16 - 140 mm ram adjustment 80 mm with shield , . new UVV-tested .

Condition: used, Year of construction: 1974, pressure 075 t throat 380 mm stroke 16- 140 mm number of strokes - idle run 105 /min Kjdpfx Aez N Hu Neg Ajdu shut height (stroke down, adjustm. up) 260 mm ram adjustment 80 mm table surface area 750 x 640 mm ram surface 500 x 200 mm hole in the table 150 mm table height over floor 800 - 920 mm total power requirement 7 kW weight of the machine ca. 4 t dimensions of the machine ca. 1,7 x 0,85 x 2,4 m Machine has an adjustable table and air operated clutch and brake.

Condition: good (used), Year of construction: 2005, Ref. no.: 16369 Manufacturer: BATTENFELD Type: EM 75-120 Unilog B4 All-electric Year of construction: 2005 Clamping unit Clamping force: 75 ton Opening stroke: 800 mm Distance between tie bars: 405 x 405 mm Mould height min.: 150 mm Mould height max.: 480 mm Injection unit Screw diameter: 18 mm Injection volume: 30 cm³ Shot weight: 27 g Injection pressure: 2440 bar Measurements and weight Dimensions: 4,5 x 1,7 x 2,0 m Machine weight: 4500 kg Further information: BATTENFELD EM 75/120 UNILOG B4 All-Electric Precision Injection Moulding Machine The BATTENFELD EM 75/120 UNILOG B4 is a high-quality Austrian-made all-electric injection moulding machine. The BATTENFELD EM series was considered one of the most advanced servo-electric machine concepts of its time and was specifically designed for energy-efficient and highly precise production processes. All major machine movements are driven by modern servo motors, providing: * very low energy consumption * high repeatability and precision * smooth and quiet machine operation * low maintenance requirements * stable and accurate production performance The machine is especially suitable for: * technical plastic components * electronic parts * precision moulded products * small and medium-sized production runs Compared to conventional hydraulic machines, the all-electric technology offers significantly improved energy efficiency and process stability. Equipped with the reliable BATTENFELD UNILOG B4 control system, the machine provides: Kjdpfewl Rucex Ag Aedu * user-friendly operation * precise process control * stable cycle times * accurate servo axis management The machine has approximately 69,094 operating hours and appears to be in clean and well-maintained condition. The photos clearly show: * a clean electrical cabinet * well-maintained mechanical components * properly kept servo-electric units * a clean injection unit The BATTENFELD EM 75/120 UNILOG B4 is a reliable and energy-efficient solution for demanding plastic injection moulding applications.

Condition: excellent (used), Year of construction: 1999, Arburg 221KS 250-75 / Universal machine Year of manufacture: 1999 injection unit: Screw diameter: 20 mm injection weight: 26 g Injection pressure: 2350 bar Metering volume: 31 ccm Clamping unit: Clamping force: 25 t tie bar distance: 221 mm size of clamping platens: 342x250 mm ejector: hydraulic clamping unit: toggle lever Control system: SELOGICA Additional equipment: Universal machine - injection unit can run both vertically and horizontally Kjdpfx Aez Iqqqeg Aedu Control with air valve Core pull control injection unit hardened - bimetal Clamp for fixing the injection unit vertical Dimensions: Weight: 1150 kg Length/width/height: 2.63x1.34x1.93 m Drive: Pump/motor: 5.5 kW Heating power: 4,6 kW Total power: 10,1 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request