Used Omga Tr2-A for sale (68,534)

Year of construction: 2019, condition: good (used), The mounted PO-335A single-row top harvester is used for automatically filling crates. The machine picks up the fennel with the gripping belts, cuts off the root, removes the foliage and conveys the product via the sorting table and depositing device to the storage crate. The fennel harvester shown stands out for its efficiency and ease of use and was specifically designed to optimize the process of harvesting fennel and filling crates. The Asa-Lift PO-335A is a versatile, mounted single-row gripping-belt harvester originally designed for leeks, but specifically adapted by the manufacturer ASA-LIFT (Grimme Group) for the mechanical harvesting of fennel for the fresh market. - Single-row fennel harvester - Double blades - Long gripping belts, 470 cm - Own hydraulic system with PTO pump and partly via the tractor - Automatic crate filling - Hydraulically driven torpedoes, 100 cm - Row spacing of 50 cm - Root cutting: Two rotating, conical discs float just above the soil to cut through the fennel taproot precisely in the ground. - Gripping-belt pickup: Gripping belts with a large D-profile grasp the foliage to transport the fennel bulbs gently from the ground to the cross conveyor. - Foliage cutting: A double hydraulically driven saw head ensures a clean, even cut of the foliage. - Crate platform with hydraulic chain conveyor for the crates - Row spacing: approximately 50 cm - Track width: 225 cm - Gripping belts: approximately 470 cm long - 2 hydraulically driven torpedoes - Torpedo length: approximately 100 cm - 2 rotating cutting discs at the front for cutting off the root - 2 rotating blades / saw blades for cutting off the foliage - Automatic depth control - 2 sensor arms for depth control - The speed of all rotating parts is adjustable - Indicative working speed: approximately 1.5 - 3.5 km/h - Indicative capacity: approximately 0.15 - 0.20 hectares per hour - Capacity depends on, among other things, product size, planting density, soil conditions and driving speed - Hydraulics: own hydraulic pump unit - 2 hydraulic pumps - 2 separate hydraulic circuits - Oil cooler - PTO drive - Tractor hydraulic connection required - Indicative minimum tractor hydraulics: approximately 35 l/min at 180 bar - Working/sorting platform for 2 people - Sorting table - Hydraulically adjustable product depositor - Automatic crate filling - Hydraulically driven crate system Crate system: - Capacity: 3 + 1 crates - 3 crates in the magazine 1 crate in the filling position - 2 separate chain drives for the crate system - Suitable crate size approximately 1,200 x 1,200 x 760 mm - Alternative crate size approximately 1,200 x 1,200 x 850 mm - Distance between central support points approximately 800 mm - Parts supported through ASA-Lift / GRIMME Laodpfxe Adw Tws Ahaoh The machine was purchased new in 2019, just before Covid, and was ultimately never used. *Collection address is in Zeeland - the Netherlands More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. See all the available machines at our website. - Since 1977 supplier of reliable used agricultural and horticultural equipment - Machines are checked for delivery - Experienced team - We can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: like new (used), Year of construction: 2015, operating hours: 4,530 h, functionality: fully functional, Equipment: chip conveyor, documentation/manual, Manufacturer: Kondia Type: A 10 Year of manufacture: 2015 Operating hours: 4530 h Technical data: X-axis travel: 1000 mm Y-axis travel: 500 mm Z-axis travel: 610 mm Control system: CNC HEIDENHAIN iTNC 530 Coolant system: yes Table length: 1200 mm Table width: 500 mm Workpiece weight: 850 kg Tool changer: 24 Lajdpfx Ahjz S Rpvoaeh Spindle taper: SK 40 Max. spindle speed: 8000 rpm Spindle motor power: 37 kW ----- Length x width x height: 2650.0 × 2100.0 × 2900.0 Weight: 5500 kg

Condition: used, Year of construction: 2003, KOTTE VTR 25, year of manufacture 2003, first registered: 02/27/2003, capacity: 25,000 liters, permissible gross vehicle weight: 32,000 kg, air suspension, K80 lower hitch, JUROP vacuum pump, tires: 750/60R30.5, TRIDEM steering axles, 1st and 3rd axles steered, forced steering, RDA tire pressure control system, hydraulic support legs, compressed air braking system, 40 km/h, sight glass at the front, partial-width shut-off (half of the working width), universal joint shaft, VOGELSANG trailing hose distributor, 15 m, year of manufacture 2010, Kotte control panel, RDA control panel. Offered price includes 19% VAT. The location may change; please inquire about the current location before visiting. Subject to changes, errors and prior sale. Laede Ad Alfepfx Ahaoh

Year of construction: 2023, condition: used, Pump speed 2.924 U/min Nominal delivery flow 21 m³/h Rated head 95,1 m Capacity 11 kw In our assessment, the pumps are in good used condition. Accessories, tools, and clamping devices shown are only included if explicitly stated in the additional information. Ljdszbvguopfx Ahaoah Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Technical specifications: Saw blade diameter: 350 mm Lsdpfx Ahezikl Hjaeah Manual feed Max. cutting height: 105 mm Max. cutting width: 140 mm Angle cutting capability Max. cutting height at 45°: 105 mm Max. cutting width at 45°: 100 mm Power supply: 400 V Motor power: 2.2 kW

Condition: good (used), Year of construction: 2007, I sell the automatic pneumatic end cutting saw OMGA T521, year 2007. Lsdevxu Rpepfx Ahasah Input table automatic feeding 5,10m (pusher system) Outut table 1,50m Total length: 8,00m Optimising with automatic cutting sequence modes. Available immediately. CE version. Documentation included.

Year of construction: 2021, condition: used, machine/vehicle number: AT95, Used Posimat bottle unscrambler - year 2021Technical Specifications & Performance DataThis Bottle Unscrambler POSIFLEX-A-20 is a proven solution for high-efficiency bottle handling at the start of a used bottling line. Manufactured by Posimat, it is engineered to orient and feed empty bottles reliably into downstream industrial packaging equipment, supporting beverage production environments that demand consistent uptime and gentle container treatment.Manufacturer: PosimatModel/Type: POSIFLEX-A-20Manufacturing year: 2021Production speed: up to 100 bpm (bottles per minute)Application: Automatic bottle unscrambling and infeed to conveyorsCompliance: CE marked; designed according to 2006/42/CE (Machinery), 2014/30/CE (EMC), 2014/35/CE (Low Voltage)Container handling: Optimized for bottle feeding in beverage production linesUse case: Ideal for second hand installations and upgrades of existing used bottling line layoutsAdvanced Automation & Control SystemsThe POSIFLEX-A-20 is built for automated operation with coordinated control of the hopper, orienting system, and discharge. Operators benefit from intuitive control interfaces and precise speed regulation to match downstream equipment, improving changeover efficiency and minimizing stops.Integrated control panel for speed and function managementAutomated bottle orientation with high repeatabilitySensor-based jam detection and bottle flow monitoringRecipe-friendly setup for rapid format adjustmentDesigned for continuous-duty operation in industrial packaging environmentsProduction Line Integration CapabilitiesThis unscrambler integrates seamlessly at the head of a beverage production line, feeding containers to air or tabletop conveyors leading to rinsing, filling, capping, and labeling machines. It supports standalone or inline operation and can be configured to accommodate a wide range of bottle sizes.Compatible with standard conveyor interfacesFlexible layout options for compact or extended linesFormat change capability for different bottle heights and diametersSuitable for integration into water, juice, wine, beer, and general beverage production processesMachine Condition & Maintenance HistoryBuilt in 2021, this second hand unit presents a modern design life and is offered in ready-for-operation condition. Its contemporary engineering and CE-compliant construction make it a strong candidate for facilities seeking to expand or modernize their used bottling line with minimal risk and reduced commissioning time.Operational Performance & VersatilityEngineered for stable performance at up to 100 bpm, the POSIFLEX-A-20 provides gentle bottle handling, consistent orientation, and smooth discharge to conveyors. This enhances downstream efficiency by reducing starved or blocked infeed conditions at rinsers, fillers, and labelers, improving overall line OEE.Gentle handling for lightweight bottlesConsistent bottle orient... Laodpfxo Adt Nus Ahajh

Condition: used, Technical data: Saw diameter: 500 mm Saw spindle diameter: 30 mm Saw feed manual Max cutting height: 150 mm Max cutting width: 500 mm Lajdpfx Ahsri Skwjajh Table width: 580 mm Table with 6 rollers in the table Diameter of rollers: 60 mm Extraction spigot diameter: 100 mm Power supply: 400 V Motor power: 4 kW Overall dimensions: Length: 4000 mm Width: 1180 mm Height: 1700 mm

Year of construction: 2022, condition: ready for operation (used), Compressed air station manufactured in 2018. This Ingersoll Rand D480EC-A is part of a complete turnkey industrial system, featuring a primary rotary screw compressor, air treatment dryers, and buffer tanks. It includes a 2,000-litre pressure vessel and multiple refrigeration air dryers. If you are looking to get high-quality compressed air capabilities, consider the Ingersoll Rand D480EC-A machine we have for sale. Contact us for further details. Lasdpj Adrpaofx Ahaeh INGERSOLL RAND RS30i-A9.6-TAS- Machine Type: Oil-Flooded Rotary Screw Air Compressor (Total Air System / TAS Configuration)- Nominal Power / Input Shaft Power: 30 kW (40 HP)- Maximum Allowable Working Pressure: 9.6 bar (138 psi)- Flow Rate / Air Capacity (FAD): ~4.7 - 5.2 m³/min (164 - 184 CFM)- Motor Speed: 2970 rpm- Electrical Supply: 400 V / 3 Phase / 50 Hz- Gross Mass / Package Weight: 1150 kg- Sound Level: 69 dB(A)- Integrated Features: Xe-70M Microprocessor Controller, Integrated Refrigerated Air Dryer, Moisture Separator, Dual-Stage Coalescing Air Filters, Heavy-Duty Pre-Filters, High-Efficiency TEFC IP55 Main Motor- Piping Connections: 1.5" NPT DischargeINGERSOLL RAND RSE37n-A13- Machine Type: Rotary Screw Air Compressor- Installed Motor Capacity: 37 kW- Stage Pressure: 13 bar- Debit Volume / Air Flow Capacity: 6,90 m³/min- Suction Pressure: 1,0 bar- Full Load Current: 81 A- Motor Speed: 3600 rpm- Air End Model: EK140NK- Version: V4- Voltage / Phase / Frequency: 400V / 3 Ph / 50 Hz- Compression Medium: Luft- Total Weight: 952 kgINGERSOLL RAND D600EC-A- Machine Type: Compressed Air Refrigeration Dryer- Electrical Power: 1,77 kW- Power Supply: 230V / 1 Ph / 50 Hz- Coolant / Refrigerant: R407C (1,70 kg)- CO2 Equivalent: 3,016 t- Ambient Temperature Range (TS): +2 / +50 °C- Compressed Air Operating Temperature Range (TS): +5 / +60 °C- Compressed Air Maximum Operating Pressure (PS): 16 barg- Low Pressure Range (LP): -15 / 52 °C (20 barg)- High Pressure Range (HP): -10 / 120 °C (30 barg)INGERSOLL RAND D480EC-A- Machine Type: Compressed Air Refrigeration Dryer- Electrical Power: 1,77 kW- Power Supply: 230V / 1 Ph / 50 Hz- Coolant / Refrigerant: R407C (1,20 Kg)- CO2 Equivalent: 2,129 t- Ambient Temperature Range (TS): +2 / +50 °C- Compressed Air Operating Temperature Range (TS): +5 / +60 °C- Compressed Air Maximum Operating Pressure (PS): 16 barg- Low Pressure Range (LP): -15 / 52 °C (20 barg)- High Pressure Range (HP): -10 / 120 °C (30 barg)INGERSOLL RAND D240EC-A- Machine Type: Compressed Air Refrigeration Dryer- Electrical Power: 0,84 kW- Power Supply: 230V / 1 Ph / 50 Hz- Coolant / Refrigerant: R407C (0,40 Kg)- CO2 Equivalent: 0,710 t- Ambient Temperature Range (TS): +2 / +50 °C- Compressed Air Operating Temperature Range (TS): +5 / +60 °C- Compressed Air Maximum Operating Pressure (PS): 16 barg- Low Pressure Range (LP): -15 / 52 °C (20 barg)- High Pressure Range (HP): -10 / 120 °C (30 barg)STIA DRUCKBEHÄLTER 2000L- Machine Type: Vertical Compressed Air Storage Vessel / Receiver Tank- Volume: 2000 Litres- Maximum Allowable Pressure (PS): 10 bar- Test Pressure (PT): 14.3 bar- Minimum / Maximum Allowable Temperature (TS): 0 / 50 °CW+Z ROHRSYSTEM-TECHNIK DTS-40-HPI- Machine Type: High-Temperature Pressure Vessel / Buffer Tank- Maximum Allowable Pressure (PS): 16 bar- Minimum Allowable Pressure (PS): 0 bar- Minimum Allowable Temperature (TS): -10 °C- Maximum Allowable Temperature (TS): 250 °C- Volume (V): 71 L- Test Pressure (PT): 28.

Condition: used, Technical specifications: Maximum cutting height: 130 mm Maximum saw blade diameter: 350 mm Bevel cutting: YES Power supply: 400 V Main motor power: 2.2 kW Overall dimensions: Height: 890 mm Lsdpfjzikk Nex Ahasah Width: 750 mm Length: 800 mm

Condition: used, New: Yes Ledpfx Ajz S Daujhaoah Year of construction: 2024 Attachment suited for: Agricultural machines

Condition: used, Technical specifications: Saw blade diameter: 300 mm Manual feed Angle cutting capability Power supply: 400 V Motor speed: 2800 rpm Motor power: 1.5 kW Overall dimensions: Lsdpfx Aszikm Rehaeah Length: 530 mm Width: 530 mm Height: 520 mm

Condition: used, Technical specifications: Saw blade diameter: 300 mm Manual blade feed Ljdpfx Ahozikmqeaeah Angle cutting capability Power supply: 400 V Motor speed: 2800 rpm Motor power: 1.1 kW Overall dimensions: Length: 530 mm Width: 530 mm Height: 520 mm

Condition: good (used), Year of construction: 1993, Omga Pneumatic Corner Frame Assembly Machine Model: Joint 502 For assembling popular types of frames. During the stapling process, the machine operator has a clear view of the frames and can, if necessary, make required positional adjustments. The two frame components are placed into the stop and locked in position by a pneumatically actuated clamp equipped with a special rubber pad to prevent damage to delicate frames. The stop is adjustable, allowing for the insertion of two staples at the desired distance. The Joint 502 allows for two different staples, even of different sizes, to be inserted at the required axial spacing, with the two staple units positioned accordingly. Ledpfx Ahoyy S Uaeaoah Location: Available from stock, 54634 Bitburg - available immediately -

Condition: used, Year of construction: 2009,

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 26-291510 R 1368710, Rod-type magazine for bar feeders, FMB TURBO 5-55/3200"A" Magazine for bar feeders, FMB TURBO 5-55/3200"A" Laedpfx Aoznl Uashaoh

Condition: used, functionality: fully functional, Year of construction: 1995, working width: 1,850 mm, Equipment: lighting, Beach Cleaning Trailer: + Kässbohrer + BeachTech STR 2000 + Year of manufacture: 1995 + PTO drive (540 rpm) + Working width: 185 cm + Dimensions: 543 cm x 230 cm x 210 cm + Unladen weight: 1,800 kg; permissible total weight: 2,800 kg + Area performance: 22,200 m³/h + Max. working depth: 30 cm + Collecting hopper 1.5 m³, tipper to the rear + Rake / Sieve + Leveller + Working speed: 12 km/h Receive all newly listed vehicles by email – sign up for our NEWSLETTER! Errors and typos possible, subject to prior sale! Lasdsxxkyvjpfx Ahajh

Condition: used, travel distance X-axis: 300 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 400 mm, spindle speed (max.): 4,000 rpm, spindle speed (min.): 40 rpm, quill stroke: 80 mm, Milling Machine Manufacturer: DECKEL Model: FP 2 A Control: Dialog 11 Laodpjzq Hlfofx Ahajh Technical Data: - X-travel: 300 mm - Y-travel: 300 mm - Z-travel: 400 mm - Speed ​​range: 40 – 4,000 rpm - Tool holder: SK 40 - Swivel range: +/- 90° - Quill stroke: 80 mm Equipment & Accessories: - Enclosure In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools shown, and clamping devices are included in the scope of delivery only if noted in the additional information.

Condition: good (used), Year of construction: 1997, I sell the double mitre saw OMGA TI2500 Super. Cutting length 230 - 2500mm Lasdjxtxh Dopfx Ahaeh Cutting width max. 1500mm Cutting height max. 115mm Saw cutting aggregate main blade + scoring blade each side. Fully tilting - 45 up to + 45 ° 2 Motors x 4,0kW (5,5 HP) Good condition. Available immediately.

Condition: used, Year of construction: 2002, DOUBLE MITRE SAW (GLASS BEAD SAW) OMGA TRF 527 NC incl. star stop Year of manufacture: 2002 Min. & max. distance between units: 158 mm, 2800 mm Cutting capacity at 90 degrees: 55 mm Cutting capacity at 45 degrees: 40 mm Max. cutting height: 40 mm Motor power: 2 x 1.18 kW Saw blade bore: 30 mm Ledpfx Ahjxwumqeaeah Saw blade diameter: 220 mm Spindle speed: 5000 rpm

Condition: excellent (used), Year of construction: 2012, ARBURG A 375 V 500-170 Turntable (S&P 3773) Manufacture year: 2012 Operating hours: 36,900 Stunden Screw: 25 HVF mm Injection pressure: 2500 bar Lodpfxoz Tzy Ij Ahaeah Stroke volume: 59 cm³ Clamping Force: 50 t Mould installation height min.: 170 mm Plate distance max.: 520 mm Dimensions: 3300 x 1700 x 2100 mm Eeight: 3740 kg Connected load: 11 + 11 = 22 kW Vertical injectionmoldingmachine with a 900mm turntable, 2 station 180°, incl. Option for horizontal injection into parting line incl. lifting table, Robot Interface EM67, Airvalve, EM73, Hotrunner etc...price when new approx. 170.000,- Euro Price: on request contact: Mr. Ralf Schulz

Condition: used, Year of construction: 1982, machine/vehicle number: 82/MA/7, functionality: fully functional, cutting height (max.): 180 mm, cutting width (max.): 350 mm, saw blade diameter: 350 mm, saw blade bore: 80 mm, Equipment: documentation/manual, Year of manufacture Lajdpezhh Uvefx Ahaeh 1986 Fully functional Cutting height (max.) 180 mm Cutting width (max.) 350 mm Saw blade diameter 350 mm Saw blade bore 80 mm Disc diameter 350 mm Description A.COSTA LEOPARD / S Cutting width: 350 mm Cutting height: 180 mm Main motors: 2 x 55 kW Feed motor: 5.5 kW Height adjustment motor: 0.37 kW Total power: 0.37 kW Max. disc diameter: 350 mm Spindle diameter: 2 x 80 mm Sleeve diameter: 2 x 100 mm Minimum element length: 800 mm Electric feed adjustment Automatic central lubrication Electric height adjustment Adjustment Electric disc height adjustment Six upper pressure rollers Pneumatic clamps Anti-ejection latches Weight: ± 6.000 kg Spare sleeves, spacers, saw blades Total length: 400 cm Number of rollers: 2 straight, 14 angled. TOTAL: 16 lower rollers + 2 upper rollers Pneumatic clamping of upper rollers

Condition: excellent (used), Year of construction: 2016, ARBURG A 370 H 600-170 Integralpicker V (S&P 3801) Manufacture year: 2016 Operating hours: 45,447 Stunden Screw: 25 HVF mm Laodpfoz Tzyhex Ahajh Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 60 t Tie bar distance: 370 x 370 mm Mould installation height min.: 200 mm Plate distance max.: 650 mm Dimensions: 4000 x 1700 x 2300 mm Eeight: 3700 kg Connected load: 5,5 / 26 kW incl. Integralpicker V, EM67, Interface color, Airvalve, Corepuller, electric Convejorbelt, Sorter Unit, price when new machine 104.200,- Euro + picker 10.500,- Euro Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2015, ARBURG A 520 H 1500-170 e² HIDRIVE (25.008 h) (S&P 3794) Laedoz Tzzrjpfx Ahaeh Manufacture year: 2015 Operating hours: 25,008 Stunden Screw: 25 mm Injection pressure: 2500 bar Stroke volume: 59 cm³ Clamping Force: 150 t Tie bar distance: 520 x 520 mm Mould installation height min.: 250 mm Plate distance max.: 950 mm Dimensions: 4800 x 1700 x 2400 mm Eeight: 6000 kg Connected load: 29 kW Robot interface EM67, Accumulator, Airvale etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Circular saw in very good condition Lodjt Uk Rmopfx Ahasah