Used Oriental Motors Engine Control for sale (70,239)

Year of construction: 2022, condition: new, functionality: fully functional, machine/vehicle number: Q230213, For sale is an unused system for flameless explosion pressure relief, manufactured by REMBE. The device is in absolutely new condition, still packaged in its original wooden transport crate, and will be delivered including original documentation and accessories. Technical data (according to the nameplate): Manufacturer: REMBE GmbH Safety+Control Type: Q-Rohr-3-G-24 Nominal size: DN 600 / 24" Relief area: 2700 cm² Material: Stainless steel Seal: Graphite Burst pressure (at 22 °C): nominal 0.700 bar g (min. 0.595 / max. 0.805) Certification: ATEX (IBExU 16 ATEX 2029 X) Signal unit: ROSE Systemtechnik (Type 15.061003, max. temperature 200 °C) Scope of delivery: 1x REMBE Q-Rohr-3-G-24 (in original wooden crate) 1x Original operating manual 1x PHOENIX CONTACT isolation amplifier (MACX MCR-EX-SL-2NAM-T-SP, original packaging) The system is ideal for industrial and process plants that require the highest ATEX safety standards. An on-site inspection is possible by arrangement. Blodjzxgtfjpfx Aqwel

Condition: good (used), functionality: fully functional, Main motor and two hydraulic pumps for a BOA hydraulic press, in good condition, for sale. The machine was taken out of service due to an electrical fault in the control system. Afterwards, the components mentioned above were removed, as they are still fully functional. Please contact me privately for further information. Bsdpfozxzcbex Aqwsll

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: SEH-80X, power: 2.79 kW (3.79 HP), fuel type: gasoline, number of cylinders: 1, cubic capacity: 133 cm³, nominal power: 4.04 kW (5.49 HP), rotational speed (min.): 1,400 rpm, rotational speed (max.): 3,900 rpm, overall weight: 33 kg, total length: 600 mm, total width: 600 mm, total height: 600 mm, torque: 10 Nm, type of cooling: air, The Koshin SEH-80X is a high-quality, professional 3-inch (80 mm) gasoline-powered water pump, driven by a reliable Honda GX160 four-stroke engine. This self-priming centrifugal pump is specifically designed for the rapid transfer of large volumes of clean to slightly contaminated water, making it widely used in construction, agriculture, shipping, and emergency drainage applications. Key specifications: • Capacity: Maximum 930 to 1,100 liters per minute (approx. 54 m³/hour free discharge). Bodpfx Aqszw U Nlswell • Head: Maximum 26 to 30 meters. • Suction lift: Maximum 7 to 8 meters. • Engine: Air-cooled Honda GX160 (163 cc / approx. 3.9 to 5.5 HP). • Connection: 3" external thread (80 mm) for both inlet and outlet. • Solids passage: Suitable for solids up to a maximum of 3 mm. • Fuel tank capacity & runtime: 3.1 liters, providing approximately 2 hours and 10 minutes of continuous operation. • Weight & Dimensions: 30 kg with a compact size of 52.5 × 38.9 × 45.8 cm. Construction & Durability • Robust pump housing: Made of lightweight and exceptionally strong die-cast aluminum. • Cast iron internals: The impeller and impeller housing are made of cast iron for excellent wear resistance against abrasive particles (such as sludge). • Mechanical shaft seal: Features a high-quality carbon-ceramic seal that prevents leaks and significantly extends the service life. • Protective frame: The entire unit is mounted in a sturdy steel rollover frame with rubber vibration dampers to reduce mechanical stress. • Oil Alert: The engine automatically shuts off when the oil level drops too low to prevent engine damage. Performance at different heights The pump delivers less water as the head increases: • Free discharge: 54,000 liters per hour • At 5 meters: 49,500 liters per hour • At 10 meters: 42,000 liters per hour • At 20 meters: 27,000 liters per hour The SEH series uses the more expensive and high-quality Honda engine. Heavy-duty ballast pump for shipping, construction, etc. Type: SE Color: black Pump type: self-priming centrifugal pump Impeller type: open impeller Engine type: 4-stroke HONDA gasoline engine Shaft seal: mechanical seal of ceramic on carbon Impeller material: cast iron Impeller housing material: cast iron Pump housing material: aluminum Pump shaft material: stainless steel Liquids: slightly contaminated water At 10 meters: 42,000 liters per hour At 15 meters: 36,000 liters per hour At 20 meters: 27,000 liters per hour At 25 meters: 9,000 liters per hour Dimensions: lxbxh = 525 x 399 x 476 mm Weight: 34 kg Engine type: HONDA, GX160, 4-stroke engine, E5 gasoline Shaft power: 2.79 kW, 3.8 hp at 3600 rpm Shaft power: 4.04 kW, 5.5 hp at 4000 rpm Fuel tank capacity: 3.1 liters, approx. 2 hours and 10 minutes

Condition: used, Inverter, Emerson Please note: This is a used item. The housing is damaged. Bodpsy Ugyaefx Aqwell

Condition: new, Year of construction: 2022, functionality: fully functional, Manufacturer: Schneider Electric Model: EF593816 Type: Power Connector Block Configuration: 3-Pole (3P) Mounting Type: Front-connected, fixed installation Series: Ecofit Condition: New Availability: In stock 16 pc Product Overview: The Schneider Electric EF593816 is a 3-pole Ecofit power connector designed for front-connected fixed breakers. This compact and robust unit is ideal for integration into low-voltage power distribution systems, particularly in industrial switchboards and control panels. Features: Bljdpfx Aqow I Twqswsl Compact 3-pole connector block Designed for fixed circuit breaker applications Front terminal access for easy installation Engineered for compatibility with Schneider Electric low-voltage breakers Suitable for panel building and retrofit projects Complies with industrial safety and quality standards

Condition: excellent (used), Different Heidelberg CTP Servo-controller for Suprasetter PL.570.3000-02 BERGER-LAHR Servo Controller for M3 drive motor for Suprasetter 74/75/105 Classic & A105 PL.572.3100-0x SCHNEIDER Servo Controller for Suprasetter A52/74/75 GEN. 1+2 PJ.105.100F/0x SCHNEIDER Servo Controller for Suprasetter A52/75 GEN. 3+4 (>2009) second-hand, tested Blsdozwfzxepfx Aqwjl All offer subject to prior sale

Condition: new, Year of construction: 2022, fuel type: diesel, number of cylinders: 6, cubic capacity: 12,816 cm³, rotational speed (min.): 1,800 rpm, overall weight: 1,015 kg, type of cooling: water, Industrial type Date of manufacture: 12/2022 Condition: new Type of engine: OM460LA Serial number: 458.991 Please contact for more information Worldwide delivery Bjdpoyymp Eofx Aqwsll

Condition: used, Year of construction: 2006, centre distance 1000 mm Blsdpozgigdjfx Aqwjl turning diameter over bed 420 mm turning diameter over bed slide 235 turning length 1000 mm spindle taper DIN 55027 Gr. 6 control MANUALPlus 4110 spindle bore 51 mm turning speed range 3 - 3000 U/min feed: 5.000/10.000 mm / min drive capacity - spindle motor 11 kW taper in tailstock-quill MK 4 dia. of quill 70 mm quill stroke 110 mm coolant ja/yes voltage 400 V Number of working hours 6.908 h weight of the machine ca. 3 t dimensions of the machine ca. 3,4 x 2 x 2,2 m BOEHRINGER DUS 400 ti CNC cycle-controlled lathe, built in 2006 -Control system: Heidenhain ManualPlus 4110 -11 kW AC main drive with 2-stage gearbox -Work area cover with chip guard door -Control panel mounted on the support, moves with the machine -Holding brake -Programmable cycles -4-position quick-change turret -Size 2 tool holder on fixed base -With 1 WD ‘/25’ tool holder -Tailstock -Rapid traverse -Coolant system -Machine lamp Condition: Machine runs perfectly, no known faults, ready for immediate use. Accessories: 1 three-jaw chuck 250 mm, bore 62 mm 1 set of hard jaws 4 sets of soft jaws including jaw holders 23 tool holders including tools Translated with (free version)

Condition: used, Servo Motor, Electric Motor, DC Motor, Stepper Motor, Stepper Motor, Stepping Motor Blodpfx Aqem Ui Idewjl -Manufacturer: Oriental Motor, Vexta Stepping Motor stepper motor unused original packaging -Type PK268-02B -Shaft: Ø 6 x 18 mm -Dimensions cardboard: 140/80/H70 mm -Weight: 1.1 kg/pc.

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor Blsdpfx Aoq Dr Scsqwsl -Manufacturer: Oriental Motor, Vexta Stepping Motor stepper motor -Type C7219-9012K -Shaft: Ø 5 x 18 mm -Dimension: 67/42/H42 mm -Weight: 0.3 kg

Condition: good (used), Servo motor, electric motor, DC motor, stepper motor, stepper motor Bodehwgdxepfx Aqwoll -Manufacturer: Oriental Motor, Vexta servomotor stepper motor from Tiromat 3000/430 vacuum packaging system -Type PH268-E1.6-A1 -Shaft: Ø 6 x 20 mm -Number: 3x stepper motors available -Price: per piece -Dimensions: 97/57/H57 mm -Weight: 0.2 kg/pc.

Condition: used, volt / V ampere / A weight / kg total power requirement / kW For sale is a hydraulic pump incl. hydraulic unit DUTCHI MOTORS Bljdpfx Aqoywnzkowel Type: DMA2 100LX4 No.: 2909432027 Power: 3kW - 3;3kW Rotation: 1425 1/min - 1720 1/min

Year of construction: 2023, condition: excellent (used), functionality: fully functional, machine/vehicle number: TC00041790, The full description can be found in the two attached documents. The MHP 1200 automatic combination weigher provides the optimal mix of individual fruits, vegetables, meat, and cheese to achieve the preset target weight. This is an automatic combination system equipped with 10 scales, each with a capacity/division of 3 kg/1 g. The MHP 1200 is manually loaded by an operator and enables automatic weight optimization, offering a significant increase in packaging efficiency. The optimal combination of products minimizes giveaway and, at the same time, increases the packaging speed with minimal staff requirements. In conjunction with the Top Control software, model Statistics Weights, all data relating to weighings and personnel are recorded and analyzed. Statistics Weights Software is a data collection solution for production, statistical management of production results, and productivity monitoring in the food sector. The system offers numerous functions and statistics, including: Blodpfxoykq T Uj Aqwol - Production progress - Production times - Weighing statuses - Preparation times - Downtime - Productivity efficiency on the lines - Optimization of weighing losses.

Year of construction: 2022, condition: excellent (used), functionality: fully functional, machine/vehicle number: TC00040812, The full description can be found in the two attached documents. The MHP 1200 automatic combination weigher provides the optimal mix of individual fruits, vegetables, meat, and cheese to achieve the preset target weight. This is an automatic combination system equipped with 10 scales, each with a capacity/division of 3 kg/1 g. The MHP 1200 is manually loaded by an operator and enables automatic weight optimization, offering a significant increase in packaging efficiency. The optimal combination of products minimizes giveaway and, at the same time, increases the packaging speed with minimal staff requirements. Bodpfxoykq D Hj Aqwsll In conjunction with the Top Control software, model Statistics Weights, all data relating to weighings and personnel are recorded and analyzed. Statistics Weights Software is a data collection solution for production, statistical management of production results, and productivity monitoring in the food sector. The system offers numerous functions and statistics, including: - Production progress - Production times - Weighing statuses - Preparation times - Downtime - Productivity efficiency on the lines - Optimization of weighing losses.

Condition: good (used), Just Normlicht Proof Control Station Ideal as a control desk for a printing machine. 230V power supply 3 drawers + opening cabinet. Keyboard drawer. Bedpoztn Uasfx Aqwoll Electronic light control (luminous intensity).

Condition: used, CNC Milling Machine DECKEL Type FP 3 A Tool-tool milling machine with handwheels, also for conventional operation Serial No. 2206 - Built in 1982 GRUNDIG CNC 2101 CNC control system Travel paths X: 490 mm, Y: 300 mm, Z: 340 mm Table size 705 x 425 mm Spindle mount SK 40 Bljdpfx Aev R E Rdsqwsl Quill stroke 100 mm Spindle speed 25 - 2500 rpm, 21 steps Feed rate 5 - 500 mm/min, continuously variable Rapid traverse speed 1200 mm/min Spindle motor power: 2/4 kW, pole-changing Power supply: 380 V, 50 Hz - GRUNDIG CNC 2101 CNC control system - Mechanical handwheels for all three axes - Universal tilt-and-turn table - Vertical milling head tilts and is manually adjustable by 200 mm - Hydro-mechanical tool clamping - Coolant system in the machine base - Protective enclosure at the front and sides with three hinged doors - Control cabinet adjacent (L x W = 600 x 430 mm) Space requirement: L x W x H: 1900 x 1700 x 1950 mm Weight: 1700 kg (machine 1540 kg + electrical cabinet 160 kg) Very good condition

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 01013115, overall weight: 15 kg, color: green, output voltage: 250 V, type of output current: DC, number of cylinders: 24, ambient temperature (min.): 18 °C, ambient temperature (max.): 65 °C, The MIC950 version C is a state-of-the-art ignition controller designed to optimize the performance of Jenbacher gas engines in the most demanding industrial applications. Thanks to its advanced architecture, this unit ensures precise ignition control, improving energy efficiency and reducing emissions. Additional uncategorized technical details: Minimum input voltage: 18 V DC Maximum input voltage: 32 V DC Nominal power: 24 V nom. Output voltage: 250 V DC Minimum temperature: -13°F Maximum temperature: +149°F Bljdpfjwtmltox Aqwol Compatibility: Jenbacher series 2, 3, 4, and 6 Availability: 173 units in stock

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control unit, converter, controller -Manufacturer: Control Techniques, Servo Drive -Type: MAXAX 100/3000 -Input: 1.5 kVA -Output: 1 kW -Number: 2x Servo Drive available -Price: per piece -Dimensions: 275/110/H235 mm -Weight: 2.8 kg/pc. Blsdszrlixepfx Aqwol

Condition: used, Used Vale Engineering Services approximately 12,000 litre working capacity (13,110 litre total capacity) 316L stainless steel vertical reactor / hydrogenation vessel. Unit measures approximately 1,750mm diameter x 5,000mm straight side (tan to tan). Unit has welded dished top and bottom heads. Internal rated 18 bar / full vacuum design pressure at -10 to 180 deg.c. External 304L stainless steel coil jacket rated 11 bar design pressure at -10 to 180 deg.c. Unit has top entry 316L stainless steel 4-tier, 6-blade agitator driven by 15kW, 1465rpm, 50hz electric motor with mechanical seal and reduction gearbox. Unit is mounted on (4) side support lugs. Specifications: Bljdpfxezun D Dj Aqwsl Capacity: 12,000 L Type of stainless: 316L Contact Parts Internal Pressure: 18 bar Internal Temperature: -10,180°C Jacket Pressure: 11 bar Diameter: 1,750 mm Straight Side: 5,000 mm Type Of Heads: Dished Legs/Lugs: 4 Lugs

Condition: used, mileage: 414,220 km, power: 290 kW (394.29 HP), first registration: 07/2021, fuel type: diesel, number of seats: 69, gearing type: automatic, next inspection (TÜV): 07/2027, emission class: euro6, color: red, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, soot filter, In accordance with our "General Terms and Conditions," without any guarantee or warranty, we can offer you the following vehicle, subject to finalization, errors, typos, and prior sale: Setra S419 UL, 69+2+1 seats, kitchen, WC (Vehicle 666) First registration: 22.07.2021 414,220 km Engine: 10,677 km Euro 6, D, M, N MOT valid until 07/2027, next inspection due 01/2027 Permissible total weight 24,000 kg Unladen weight 16,000 kg Payload 12,000 kg Overall length 14,980 mm, overall width 2,550 mm, overall height 3,355 mm 2 doors Additional headlights Trailer coupling 69+2 seats Fully automatic transmission Automatic climate control, auxiliary heater On-board kitchen WC with washbasin ALCOA alloy wheels Tires 295/80R22.5, 1st approx. 80/50%, 2nd approx. 80/80%, 3rd approx. 60/90% 3rd axle steerable + liftable, relief axle Fabric seats with leather cushions and red seat edging Large screen Bledpfx Aszwazgsqwsl Radio/CD Microphone Multi-function steering wheel Vehicle is currently being prepared Price: €219,000.00 (net) All information without any guarantee or warranty. Our "General Terms and Conditions" apply. The place of jurisdiction for both parties for disputes up to €5,000.00 is the local court of Ludwigslust; for disputes exceeding this amount, it is the regional court of Schwerin. Subject to errors, typos, and prior sale.

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 100 h, !! Parts in mint condition with warranty!! Price between €300-1000 each. Bledpfeucwzasx Aqwol Over 40 motors and controllers available. A list of the items is available upon request. We would be happy to advise you!

Condition: used, CNC control, control panel, machining center, server cabinet Bedpfx Asfkq T Teqwjll -I/O Control: control panel -Dell: Desktop KXGVD -Dell: Optiplex 390 Tower -Dimensions: 505/640/H1600 mm -Weight: 72 kg

Condition: used, mileage: 355,000 km, power: 96 kW (130.52 HP), first registration: 05/2009, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, gearing type: mechanical, emission class: euro4, suspension: steel, Year of construction: 2009, ENGINE SEIZED DOES NOT RUN Bodjy Az Ibspfx Aqwsll = Further information = Front axle: Steered Rear axle: Twin tyres; Suspension: Leaf spring suspension Engine displacement: 2,488 cc Unladen weight: 2,568 kg Payload: 920 kg Gross vehicle weight: 3,500 kg Technical condition: poor

Condition: used, Universal temperature control unit WEINREICH, Type WTD 4 Temperature control unit with electric heating and connections for external cooling Manufacturer's serial number: 11932217, Year of manufacture: 1993 Temperature: max. 140°C Operating overpressure: max. 6 bar Pump capacity: 30 l/min Tank volume: 4 liters Heating capacity: 4 kW Cooling capacity (heat exchanger): 15 kW Pump motor power: 0.37 kW Circulating water, supply + return: G 3/8" Cooling water, supply + return: G 3/8" Total power: 4.4 kW Mains connection: 380 volts, 50 Hz, CEE plug - Temperature control medium: water - Temperature control with actual and setpoint display: STÖRK-TRONIC, Type ST 96-35.02K - Water circulation pump: SPECK Bjdpfsg Rhx Uex Aqwell - An external cooling unit is required for cooling (the cooled water is fed to the temperature control unit) - Movable on 4 rollers Dimensions L x W x H: 620 x 260 x 670 mm Weight: 55 kg Good condition

Condition: used, CNC control, control panel, machining center, server cabinet -I/O: Control panel Bljdpfsfkq T Usx Aqwel -Dell: Desktop KXGVD -Dell: Precision T1650 Tower -with: scanner -Dimensions: 505/640/H1600 mm -Weight: 74 kg