Used Osram X6 Vm for sale (1,806)

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, working width: 200 mm, working height: 40 mm, Equipment: documentation/manual, Impregnation machine / Coating machine Manufacturer: Schiele Type: Impregmat VM Mini Year of manufacture: 2016 Board coating machine with brush application, suitable for coating profiled boards, moldings, and construction timber. Suitable coating systems: Suitable for water-based paints and coatings Suitable for solvent-based paints, stains, and coatings Working width: approx. 30 - 200 mm Workpiece height: approx. 5 - 40 mm Workpiece length: from approx. 800 mm - endless Feed speed: approx. 20 m/min pneumatic double-diaphragm pump Stainless steel machine body for easy cleaning with roller conveyors before and behind the machine, length approx. 2000 mm each Documentation & wiring diagram available Hedpfxozpydrj Ab Aet

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, load capacity: 13 kg, Fully functional Hodpfx Abezvflbj Aet

Condition: new, Year of construction: 2026, Interbake V-MIX 60 planetary mixer 60 liter with 2 bowls. The very solid construction of the device allows you to work with cakes and masses in the baking and confectionery industry. Thanks to the mechanical system of lifting and lowering the bowl, it is possible to work continuously without removing the tool. The innovative solution of the gearbox allowed for multiplication of the torque, which translates into higher efficiency with lower energy consumption. A very precise arrangement between the tool and the cauldron allows you to knead small amounts of masses, creams, cakes. Available in 60,80,100 and 120 liter digital control panel stepless regulation - frequency inverter control programming 20 mix recipes programming the time of mixing automatic lifting of the bowl 3 tools included: dough hook wire whip Hodpfx Abowcx N Aj Aot flat beater

Condition: excellent (used), Year of construction: 2016, operating hours: 13,000 h, functionality: fully functional, Vertical machine center Haas VM 6 with below options 12000 rpm spindle HSS Touch probe Tool setter Through spindle coolant chip auger Hodpfxjyb S U Ue Ab Ast

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 660 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 508 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, controller manufacturer: Hurco, controller model: WinMax, workpiece weight (max.): 681 kg, total height: 2,519 mm, total length: 1,800 mm, total width: 1,671 mm, table width: 406 mm, table length: 762 mm, table load: 681 kg, overall weight: 2,818 kg, spindle speed (max.): 10,000 rpm, distance table to spindle center: 101 mm, distance table center to spindle nose: 610 mm, spindle motor power: 11 W, spindle nose: ISO40, number of spindles: 1, number of slots in tool magazine: 20, tool length: 25 mm, tool diameter: 89 mm, tool weight: 7 g, Equipment: chip conveyor, documentation/manual, Used Hurco VM10i vertical machining center, ideal for companies seeking precision, reliability, and productivity with a reasonable investment. This machine is perfect for mechanical workshops, subcontractors, and manufacturers of components for automation, automotive, hydraulics, and general mechanical applications. It features a robust structure, high precision, and excellent performance in milling, drilling, and tapping operations. The machine is in good working condition and ready for immediate integration into production. Hsdpezcpu Isfx Ab Ajt Available for inspection and testing at our facility. The machine is complete with: * Auger-type chip conveyor with side discharge * High-pressure pump * Digital manuals * CE declaration of conformity

Condition: like new (used), Year of construction: 2014, functionality: fully functional, overall weight: 1,000 kg, Moda Meccanica mixer for material; we used it for LDPE virgin and recycled material. Hedpfxezfikas Ab Ast Capacity: 1 ton

Condition: excellent (used), Year of construction: 2018, operating hours: 13,500 h, functionality: fully functional, machine/vehicle number: 138855-100, Sales only within Europe, including Turkey. Price excludes packaging; delivery condition: FCA (machine location). ===== For technical data, please refer to the handout provided. Any warranty or guarantee is excluded. We do not assume liability for the accuracy of the technical data or year of manufacture, the completeness of accessories and tooling, or compliance with all safety and environmental protection requirements specified in accident prevention regulations. Hedpey Dgl Ujfx Ab Aot No sales to private individuals.

Condition: good (used), Year of construction: 2014, functionality: fully functional, Hurco VM 20 i, Hodpfx Abozc Icwj Ajt Year of manufacture: 2014, Control system: Winmax, Travel range X/Y/Z: 1016/508/400 mm, Tool changer: 24-position, Tool holder: SK 40, Spindle speed: up to 12,000 rpm, Chip conveyor, Approximately 11,000 operating hours.

Condition: excellent (used), Year of construction: 1959, Schaublin 102 VM In very good condition. Hodpfx Aezp Uz Ssb Ajt Includes accessories as shown in the pictures. Transportation can be arranged.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, travel distance X-axis: 1,626 mm, travel distance Y-axis: 813 mm, travel distance Z-axis: 762 mm, rapid traverse X-axis: 15 m/min, rapid traverse Y-axis: 15 m/min, rapid traverse Z-axis: 15 m/min, workpiece length (max.): 406 mm, workpiece weight (max.): 1,814 kg, total height: 3,277 mm, total length: 2,921 mm, total width: 4,521 mm, table width: 711 mm, table length: 1,626 mm, rotational speed (max.): 15,000 rpm, overall weight: 10,887 kg, spindle speed (max.): 15,000 rpm, coolant supply: 70 bar, spindle nose: HSK-A63, number of slots in tool magazine: 51, input voltage: 380 V, type of input current: three-phase, Equipment: chip conveyor, rotational speed infinitely variable, We are offering this excellent Haas VM-6 vertical machining center, manufactured in 2023. Model: VM-6 Serial number: 1280338 Date of manufacture: 04/2023 Voltage: 380 V Phase: 3 Frequency: 50/60 Hz Rated current: 35 A Maximum current: 35 A The machine is in good condition. It has only been used to machine aluminum. All HSK tool holders are included. No work table is included. Additional options: 15K spindle with HSK-A63 interface 50+1 tools Through-spindle coolant, 70 bar Wireless, intuitive measuring probe system by Renishaw. For both the tool and the workpiece. Quadruple lead screw system with conveyor belt for chip removal Coolant maintenance kit External coolant filter Chip drawer filter set If you have any questions or would like more information, please feel free to send us a message or call us. Hsdpfxoza A I As Ab Aet

Condition: used, Year of construction: 2019, product width (max.): 530 mm, roll diameter: 1,000 mm, We offer this used OMET X6 530 flexographic printing press, year of construction 2019. Hjdoyfh Aiopfx Ab Aet Manufacturer: OMET S.r.l. Model: X6 530 Serial Number: 2188 Year of Construction: 2019 Machine Type: web press If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: repair required (used), Year of construction: 1995, machine/vehicle number: VM40067E, travel distance X-axis: 560 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 410 mm, overall weight: 6,000 kg, spindle speed (min.): 8,000 rpm, Brand / Manufacturer: HITACHI Model: SEIKI VM 40 II Year: 1995 Taper: BT40 Serial number: VM40067E Control unit: SEICOS MY II DIMENSIONS Table dimensions: 760 x 400 mm. TRAVEL X-axis traverse: 560 mm. Y-axis traverse: 410 mm. Z-axis traverse: 410 mm. SPINDLE Spindle speed: 8,000 rpm. Spindle power: 5.5 / 7.5 kW. WEIGHT AND DIMENSIONS Machine weight: 6,000 Kg. ACCESSORIES 30-station automatic tool changer / ATC Capacity: 30 Tools Nikken 4th axis CNC rotary table (REQUIRES REPAIR) The machine is complete and includes documentation and manuals. The mechanical part is in good condition. The electronics need repair; likely the power supply. (NEEDS TO BE REPAIRED) The machine is complete. It also has documentation and manuals. The mechanical part is good. The electronics need repair. Probably the power supply. Hsdjzl S I Uopfx Ab Aet

Condition: good (used), Year of construction: 2016, functionality: fully functional, Controller MAX5 DSM (2 x 19" screens) Table size 762 x 406 mm X-axis travel 660 mm Y-axis travel 406 mm Z-axis travel 508 mm Spindle speed 10 – 12000 rpm Tool magazine 20 positions Tool holder SK40 Rapid traverse X/Y/Z 28 m/min Power 9,4/11 kW Footprint 2000 x 1800 x 2600 mm Machine weight 2850 kgs Hjdpfx Aey Du I Rjb Ast Accessories - Software options: 3D, DXF, AVG (realistic graphics), pockets/islands, ramp function, rigid tapping, cutting, tool and material database, NCPP and ISNC (macro ISO code programming), Ultimotion - MPG - Coolant water system - Chip auger - Signal light - Machine feet

Condition: refurbished (used), Year of construction: 2010, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 30,000 m/min, controller manufacturer: HEIDENHAIN iTNC-530, controller model: iTNC-530, spindle speed (max.): 10,000 rpm, spindle motor power: 22 W, BRAND: DOOSAN MODEL: VM-640 CATEGORY: VERTICAL MACHINING CENTERS YEAR OF MANUFACTURE: 11/2010 CNC CONTROL: HEIDENHAIN ITNC-530 MACHINE WEIGHT: 9,000 kg MACHINE DIMENSIONS: Length: 4,200 mm; Depth: 2,800 mm; Height: 2,900 mm Spindle Taper size: ISO-40 Spindle speed: 12,000 rpm Spindle motor power (cont./30 min.): 18.5/22 kW Working Capacity X axis: 1,300 mm Y axis: 650 mm Z axis: 625 mm Distance spindle nose – table surface: 150 ÷ 775 mm Table Table dimensions: 1,400 x 650 mm Maximum table load: 1,000 kg Feed Rates Rapid traverse (X / Y axes): 36,000 mm/min Rapid traverse (Z axis): 30,000 mm/min Working feedrates (X / Y / Z axes): 1 ÷ 15,000 mm/min Tool Changer Tool taper: DIN 69871 – A40 Shank: DIN 69872 – A40 Tool magazine capacity: 30 stations Max. tool diameter (adjacent stations full/empty): Ø 90 / Ø 150 mm Max. tool width: 300 mm Max. tool weight: 8 kg Other Equipment Hjdpfx Aexxlfyeb Ajt Chip conveyor Coolant tank with wash pumps High-pressure coolant pump through spindle Spindle line air conditioning unit Transformer Manuals, Electrical Schematics, and CE Declaration The following maintenance has been performed on the machine: - X axis ballscrew overhauled and bearings replaced - Geometry recovered with hand-scraping of Turcite on X/Y axes - Complete internal repaint and Lexan replacement - Complete overhaul of X/Y/Z axis telescopic covers - Lubrication system overhauled

Condition: good (used), Year of construction: 1993, functionality: fully functional, Schaublin 102 N - VM, Machine number BL 330699, Year of manufacture approx. 1993, Hedpezlc Apofx Ab Ast Machine with leadscrew, Centre height 102 mm, Leadscrew: diameter 40 mm, hardened and thread ground. Leadscrew pitch: 4 mm. Feeds: 8 longitudinal feeds from 0.02 to 0.3 mm/rev. Threading range: Metric: 20 pitches from 0.25 to 4 mm. Imperial (inch): 25 pitches from 80 to 6 tpi. Centre distance 450 mm, max. turning diameter over bed 200 mm, max. turning diameter over cross slide 120 mm, Spindle speed up to 2,800 rpm, Tailstock, Accessories,

Condition: excellent (used), Year of construction: 2017, Traverses X Y Z: 1016mm x 508mm x 508mm, table size 1168mm x 508mm, 10000rpm spindle, 20 station ATC, BT40 spindle taper, Hodpfjzh Hw Nsx Ab Ajt input 15kW, Hurco WINMAX 5 control, coolant, swarf auger.

Condition: ready for operation (used), Year of construction: 2015, operating hours: 14,870 h, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, controller manufacturer: HAAS, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 40, number of axes: 3, This 3-axis HAAS VM-3 was manufactured in 2015. It features an impressive X-axis travel of 1,016 mm, Y-axis travel of 660 mm, and Z-axis travel of 635 mm. The machine includes a maximum spindle speed of 12,000 rpm and an automatic tool changer with 24 positions. If you are looking to get high-quality machining capabilities, consider the HAAS VM-3 vertical machining centre we have for sale. Contact us for further details. • Software version: M18.24B • Spindle taper: 40 taper • Power supply: 354–488 V, 3-phase, 50–60 Hz Hjdjzv T Ukspfx Ab Ast • Options/features: • Through-Spindle Coolant (TSC) • High-Speed Machining (HSM) • Programmable coolant • Coolant system with filtration • Operating data: • Run time: 14,870 h • Tool changes: 117,359 • Power-ons: 2,608 Additional equipment • Renishaw workpiece probing system • Tool measurement and setting system • Chip removal system

Condition: excellent (used), Year of construction: 2017, Vacuum lifting device, vacuum lifter from Schmalz for heavy plates with new suction cup rubber. Lifting capacity: 150 kg horizontally and vertically. Suction cup can be pivoted 90 degrees by motor. Suction box: 1000 x 675 mm. Audible warning signal for too low vacuum. 400 V, 1.5 kW. Can be attached to an existing chain hoist. CE marking. No inspection book available. Suction cup rubber replaced. As new condition. Hedpfxjv S Syne Ab Ast The machine can be demonstrated on-site by appointment. We only offer machines that are readily available for demonstration in our warehouse; see "other offers from this supplier."

Condition: excellent (used), Year of construction: 2015, Battenfeld VM 150/525 R1280 Servo Power / Vertical Injection Molding Machine with Rotating Table Year of manufacture: 2015 Injection unit: Screw diameter: 35 mm Injection weight: 175.6 g Injection pressure: 2743 bar Dosing volume: 193 cc Clamping unit: Clamping force: 150 t Type distance: 0 x 0 mm Clamping platen size: 1280 mm Ejector: hydraulic Clamping unit: hydraulic Control system: UNILOG B6 Additional equipment: Vertical injection molding machine with rotating table Hybrid machine: high-speed, energy-efficient, and very quiet Air valve x 5 Hydraulic core pull x 1 Control system with hot runners x 12 Injection unit is wear-resistant and corrosion-resistant Rotating table diameter: 1500 mm Rotary table, driven by a servo motor and controlled by an inverter Dimensions: Weight: 11300 kg Length/Width/Height: 3.83 x 1.50 x 4.07 m Hsdpezc Nubofx Ab Aet All machines offered are started up by our service technicians before sale. You can receive a video of the technical tests of the selected machine or participate in live technical tests at our facility in Łódź. Price: Upon request

Condition: used, Year of construction: 2022, surface area 1321 x 610 mm max. table load 1800 kg travel -x axis 1270 mm travel -y axis 508 mm travel -z axis 508 mm spindle cone SK40 number of spindle speeds 12000 U/min spindle capacity 15 kW spindle torque max. 82 Nm rapid traverse y/x/z axis 28 m/min control HURCO MAX5 total power requirement 21 kW weight of the machine ca. 4,25 t dimensions of the machine ca. 4,1 x 3,35 x 2,6 m the machine is like new!!!, only 136 spindle hours Tool changer: - Magazine capacity: 24 positions - Max. tool diameter: 80 mm - Max. tool length: 250 mm - Max. tool weight: 7 kg Hsdpfxsza Hque Ab Ajt Accessories: documentation

Condition: used, Year of construction: 2023, surface area 1168 x 508 mm max. table load 1800 kg travel -x axis 1016 mm travel -y axis 508 mm travel -z axis 508 mm spindle taper SK40 spindle speed 10000 U/min spindle capacity 15 kW spindle torque max. 99 Nm rapid traverse y/x/z axis 28 m/min control HURCO MAX5 total power requirement 20 kW weight of the machine ca. 4,15 t dimensions of the machine ca. 3,7 x 3,3 x 2,5 m The machine is like new !!!, only 61 spindle hours Tool changer: - Magazine capacity: 24 positions - Max. tool diameter: 80 mm - Max. tool length: 360 mm Hodsza Hqnjpfx Ab Aet - Max. tool weight: 7 kg Accessories: documentation

Year of construction: 2021, condition: used, functionality: fully functional, We offer this used Schmalz VM-MULTI-H-CON manipulator, manufactured in 2021. Model: VM-MULTI-H-CON Article number: 12.01.99 10001 Order number: 22144181 Serial number: 0DE0082732 Date of manufacture: 02.2021 Machine group: M275 Load capacity: 275.00 kg Own weight: 80.30 kg Voltage: 400 V Hsdpszmrhqofx Ab Aot If you have any questions or require further information, please do not hesitate to send us a message or contact us by phone.

Condition: good (used), Year of construction: 2016, OMET X6 Year of manufacture: 2016 Web width: 430 mm Condition: Very good – well maintained, in production Availability: End of 2026 Location: Europe Technical Configuration – 6 x Flexo printing units (servo-driven, sleeve system) – Printing on self-adhesive materials – 6 x UV curing lamps – Extended varnishing on last printing unit – Turn bar (web turning device) – 2 x Die-cutting units – 1 x GapMaster system – 3 x Sheet-off die-cutting stations with delivery belt – Sheet delivery with evacuation conveyor Equipment – 3 x Sleeve sets – 6 x Anilox rollers – 3 x Magnetic cylinders Application and Advantages The OMET X6 is a high-performance flexographic press combining state-of-the-art servo technology with the flexibility of sleeve systems. It offers: – Fast job changes with minimal downtime Hodpfsyyn U Ajx Ab Aet – High register accuracy and consistent print quality – Versatility for both roll-to-roll and sheeted label production – Efficient inline finishing capabilities (die-cutting, varnishing, sheeting) – Ideal for medium to long runs and frequent job changes General Condition The machine is in very good condition, professionally maintained, and currently in operation. Inspection and test runs can be arranged at any time by appointment.

Condition: good (used), OSRAM 890 9211 151 6358 LS 64xEIGA Plug-In Card We have three pcs in stock, price is for one pc only. Hjdpfx Abjvx T Sxe Aet

Condition: used, Year of construction: 2018, travel distance X-axis: 2,300 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 1,000 mm, table length: 2,300 mm, table width: 1,600 mm, spindle speed (max.): 10,000 rpm, spindle nose: SK 50, Used CNC portal milling machine KRAFT VM-2018B with Heidenhain TNC 620 Year of manufacture: 2018 Storage location: Germany Delivery time: short term Payment: 100% before loading Warranty: none Hedpowkg T Sofx Ab Aot Machine description The KRAFT VM-2018B is a precise and powerful CNC portal milling machine with HEIDENHAIN TNC 620 control, ideal for heavy-duty and high-precision machining processes. Thanks to its robust design and high-quality components, it is ideal for demanding milling tasks in tool and mold making as well as in series production. Highlights & features Monoblock cast iron bed and cross beam for maximum rigidity and precision FEM-optimized machine design BF gearbox with 26 kW motor for high torque (662 Nm) Feed roller linear guides P-class (very low coefficient of friction 0.003-0.006) C3 ball screws with double nut - high load capacity & accuracy Spindle: SK50, 10. 000 rpm, direct drive Heidenhain TNC 620 control Spindle cooling & IKZ 20 bar Coolant system, oil separator, air conditioning for control cabinet Full enclosure, TÜV-approved, CE-compliant Technical data Travel (X/Y/Z): 2,300 / 2,000 / 1,000 mm Table size: 2,300 × 1,600 mm T-slots: 8 × 22 × 180 mm Max. Table load: 8 t Distance spindle nose - table: 180-1,180 mm Rapid traverse X/Y: 20,000 mm/min Rapid traverse Z: 15,000 mm/min Feed range: 1-10,000 mm/min Positioning accuracy (VDI/DGQ3441): 0.020