Used Perske 6Dw 10-6 for sale (66,042)

Condition: used, Year of construction: 1997, sheet width 3100 mm plate thickness 6.35 mm thickness at "Niro-steel" 4.00 mm cutting angle 0.5 - 2.5 ° cutting gap adjustment 0.05 - 0.8 mm no. of strokes 12 - 50 Hub/min Djdpfx Aqjy I Dbbocjch back stop - adjustable 1000 mm Control DELEM DAC 360 oil volume 120 ltr. engine output 9.5 kW weight 7000 kg. range L-W-H 3950 x 1950 x 1680 mm well-maintained condition (!!) equipped with new DELEM control unit Equipment: - electro-hydraulic, guided plate shear - DELEM CNC control unit type DAC 360 * front control panel, swiveling front left - Electro-hydraulic cutting angle adjustment - Electro-hydraulic cutting gap adjustment - electro-motorized backgauge, with ball screws - 1x extra-long side fence with T-slot mm scale

Condition: excellent (used), Year of construction: 2006, Carl Zeiss Contura G2 7/10/6 VAST XT Gold Technical data: Measuring range: X=700mm, Y=1000mm, Z=600mm Controller: C99 with BP26_SE control panel Last calibration: 05/2025 Dcjdsy Ia Tajpfx Aqcsh Retrofit Equipment: 8-fold MSR probe changer system Probe changer rack Probe accessories Calibration sphere HP Z4 WIN11 workstation with monitor Calypso software Options: Planner, IGES in/out additional accessories

Condition: ready for operation (used), Year of construction: 2006, weight max. in kg 1000 kg table length 1500 mm table width 1000 mm height over floor 200 mm stroke height 200 - 1200 mm stroke Zeit ca. 15 sek total power requirement 2.3 kW weight 330 kg current new price approx. 5.000 euros special price on request Equipment: - Robust electro-hydraulic scissor lift table - for ergonomic working at an optimum working height - with closed platform Dcedjy Ez Awspfx Aqceh - stepless lifting and lowering - All-round safety rails - Placement: free-standing on the floor or as a pit installation - remote control

Condition: used, We are offering used shelving units here. TECHNICAL DATA Manufacturer: FX Rauscher Type: P30 Condition: Used Frame height: approx. 2,500 mm Shelf dimensions: 1,220 x 400 x 33 mm Shelf load capacity: 100 kg Number of levels: 6 pcs Boltless assembly Use: single-sided Material: galvanized steel PRICE €506.50 net (2 starter bays + 8 extension bays) €602.74 gross incl. VAT Tiered Pricing Starter bays: 1 - 5 pcs: €70.00 net y6 - 20 pcs: €66.63 net 21 - 50 pcs: €63.25 net from 51 pcs: €59.88 net Extension bays: 1 - 5 pcs: €50.00 net 6 - 20 pcs: €47.50 net 21 - 50 pcs: €45.00 net from 51 pcs: €42.50 net Large quantities are available directly from stock. YOUR CONTACT PARTNERS: Oliver Kopp Rainer Nürenberg Tanja Henkelmann TRANSPORT & INSTALLATION We can assist you with transport and assembly of the goods. This item is available for collection. Delivery or shipping is available at an extra charge. Additional costs vary depending on delivery location and order volume and can be individually quoted upon request. PROJECT PLANNING Our sales team will gladly provide you with a non-binding, tailor-made offer according to your requirements. TRANSPORT & INSTALLATION We are happy to assist you with the transport and installation of the goods. Dcodpfx Aqey Hqrkjceh PAYMENT TERMS Payment terms are to be agreed upon in the case of an order. The indicated price is per unit/net price or as stated in the description (plus VAT). You will of course receive an invoice with VAT shown separately. ABOUT US DLK in Nordhorn trades in new and used products from the fields of warehouse logistics, conveyor technology, mezzanine floors, textile storage, as well as machines for commerce, industry, and trade. We continuously offer attractive used equipment from various manufacturers/brands at competitive conditions. If you have any questions, please feel free to contact us. Four wins – The success building blocks of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: good (used), Year of construction: 1997, Adjustable traverse, crane traverse, overhead crane, crane hook traverse, load traverse, heavy load traverse, compensating traverse -Manufacturer: LHS load handling equipment, compensating spreader beam for transporting different loads -Type: TIV 10-6 -Loading capacity: 10 t -Transport dimensions: 6030/410/H930 mm -Empty weight: 720 kg Dcodpfey D Hk Rsx Aqcoh

Condition: good (used), functionality: fully functional, Opening: 620 x 350 mm Rotor-diameter x -width: 1.060 x 610 mm feed size hardrock -180 mm feed size limestone -300 mm, complete with E-drive, conveyor and steel-construction Dedpfxjlgzrhe Aqcoch

Condition: used, functionality: fully functional, Year of construction: 2005, lifting height: 3,415 mm, load capacity: 990 kg, power: 0.85 kW (1.16 HP), color: light blue, working width: 6,000 mm, working length: 8,000 mm, Seldom-used freestanding crane system / gantry crane with 4 legs / supports. W=6000, L=8000, H=4110 mm Operation via wired control unit: 2 x lifting, 2 x lowering, emergency stop. Electric chain hoist SiD6F 1000/2, chain hoist speed 4 & 1 m/min, 400V/50 Hz. Complete with original paper documentation. Crane runway is currently still assembled and fully functional, will be handed over to the buyer disassembled at the yard gate. Dsdpoyt Eyhjfx Aqcoch

Condition: ready for operation (used), Year of construction: 2019, total height: 2,797 mm, overall weight: 1,570 kg, This 3-axis ZEISS Contura 7/10/6 RDS was manufactured in 2019 and features a robust motorized CNC drive system with a maximum vector speed of 465 mm/s. It includes the ZEISS RDS-C articulating head and VAST XXT TL3 sensor, capable of scanning speeds up to 150 points/second. Ideal for precise measurements with a maximum workpiece weight of 730 kg. Consider the opportunity to buy this ZEISS Contura 7/10/6 RDS CMM machine. Contact us for more information about this machine. Additional information • Maximum workpiece size: approx. 1344 x 910 x 716 mm • Maximum workpiece weight: 730 kg • Table height: 850 mm • Equipped with vibration damping system • Sensor System: • Articulating head: tilt ±180°, rotation increments 2.5° • Scanning speed: up to 150 points/second • Max. stylus length: 150 mm • Max. stylus weight: 15 g • Min. stylus tip diameter: 0.3 mm • Accuracy (per ISO 10360 standards): • Length measurement error (E₀): 1.7 + L/350 µm (at 18–22°C) • Scanning error (THP): 2.7 µm • Form measurement error (RONt): 1.7 µm • Repeatability (R₀): 1.2 µm Djdpfxox D Ngfs Aqcjch • Controller: ZEISS C99L • Software: ZEISS CALYPSO, ZEISS GEAR PRO, ZEISS HOLOS • Control mode: Motorized / CNC • Interface: Ethernet, USB • Performance: • Drive system: Motorized CNC • Travel speed (axes): 0–70 mm/s • Max. vector speed: 465 mm/s • Max. acceleration: 1.85 m/s² • Scanning speed: up to 125 mm/s • Utilities: • Power supply: 100–240V AC (±10%), 50–60 Hz • Max. power consumption: 800 VA • Typical power usage: 200 W • Compressed air: 6–8 bar, pre-cleaned, dry (ISO 8573-1 Class 4) • Air consumption: max. 120 Nl/min • Environmental Conditions: • Operating temperature: 18°C–22°C • Relative humidity: 30–60% (non-condensing) • Compliance & Certifications: • Conforms to EC Machine Directive 2006/42/EC • EMC Directive 2014/30/EU • Quality management: ISO 9001:2008 • Environmental management: ISO 14001:2004 • Accredited ISO / IEC 17025:2005 Dimensions Machine Depth 1975 mm

Condition: used, Year of construction: 2013, General technical data: Machine type: Flexographic printing press Web width: 530 mm Number of colors: 10 Equipment & Configuration: • 1-side tape cleaner • 1-side corona treatment • Turning bar • Delam/Relam unit – 1 color • Cold foil unit – 1 • Die-cut station – 1 • Master gap unit – 1 Dcodpfx Aqoyplyaoceh • Rewind shaft – 1 • 10 UV GEW lamps • 3 sets of sleeves • 10 anilox rollers • 3 magnetic cylinders

Year of construction: 2021, operating hours: 8,000 h, condition: excellent (used), Real occasion due to automization of the workshop: Edilux 10+6 from 2021 for straight edges from 10 to 100mm thickness with: 10 frontal polishing spindles Dedpfxjyrr Uvj Aqcjch 3 upper bevelling spindles 3 lower bevelling spindles automatic lubrication 2 roller tables of 2mt. each Very good condition

Condition: good (used), Collet head, pressure collet, collet sleeves, collet, tool holder, tool holder, milling chuck, milling tool, collets -Clamping sleeves: Ø23 x 33 mm, 81 pieces Sizes: Ø 4/5/6/8/10/12 mm, see photos / parts list -Price/Fee: complete -Transport dimensions: 555/205/H190 mm -Weight: 15.2 kg Dcjdoyknlhopfx Aqcsh

Condition: excellent (used), Microbox Simatic PC 420 Dedpfxsim H Sho Aqcjch 6 A G 4040-OAE 10-OA BO S VPTN 00 1726

Condition: like new (used), functionality: fully functional, machine/vehicle number: SBO 6/10, Sidel Stretch Blow Moulding Machine Max. output: 6.000 bottles/hour. Max. bottle size: 3.000 cc. Blow stations: 6. Dedeg Ailcopfx Aqcoch Machine is in very good conditioning and well maintained. GENERAL INFORMATION The SBO 6/10 has 6 molds and 10 heating modules. Will work with a wide range of bottle sizes and styles from 0.25 to 3 liters. Sidel 2-step ^PET stretch-blow molders require previously manufactured preforms be supplied to the machine. Separating the bottle manufacturing and preform manufacturing processes allow production to be optimized, provide greater flexibility of operation and use, and provide higher production output rates and yield. MAXIMUM PREFORM DIMENSIONS Neck height 9 – 41 mm (measured from bottom of support ring) Minimum inside diameter of neck 19 mm Maximum outside diameter of neck 34 mm Preform support ring diameter 29 – 51 mm Maximum preform length 210 mm MAXIMUM BOTTLE DIMENSIONS Maximum bottle diameter 130 mm Maximum bottle height 380 mm Bottle capacity 0.25 – 3 liters AVERAGE PREFORM WEIGHTS (non carbonated and carbonated liquids) 0.25 liter bottle 14-20 grams 0.50 liter bottle 20-33 grams 1.00 liter bottle 26-40 grams 1.50 liter bottle 35-51 grams 2.00 liter bottle 44-58 grams 3.00 liter bottle 68-84 grams BLOW WHEEL Height 3.5 meters Number of molds 6 Closing force 10 tons Item height (under neck) at outfeed 1.4 meters approximately Machine DC drive motor power 4 KW HEAT CONDITIONING Height 2 meters Number of oven heating units 10 Number of heating zones per unit 8 Maximum power 170 KW ELECTRICAL USAGE Maximum supplied power 200 KW Average consumption 100-150 KW/hr (varies per bottle being produced) COMPRESSED AIR Supplied power from 7-35 bar Pressure 7 bar Flow rate 50-100 Nm3/hr (varies per bottle being produced) Blow pressure – champagne base up to 25 bar Blow flow rate – champagne base 110-550 Nm3/hr Blow pressure – petaloid base up to 35 bar Blow flow rate – petaloid base 155-770 Nm3/hr CHILLED WATER Temperature 10-12 degrees Centigrade Pressure 5-6 bar Flow rate up to 6 cubic meters/hour Kcal to be removed up to 16,000 Kcal/hour WEIGHT Blow wheel with molds 8 tons Heat conditioning unit 2.2 tons Preform feeder 0.65 tons Electrical cabinet 0.85 tons PREFORM HEAT CONDITONING The preforms are transferred neck up to the heat conditioning device. This unit continuously insures the preforms are inverted before passing, neck down, in front of the heating units and then inverts them again. During the heating phase, the preforms are rotated and their necks protected from the heat in order to optimize the distribution of heat without deforming the neck. Heating is insured by 10 heat modules. Each unit can accommodate up to 8 infrared lamps stacked horizontally whose ends are air cooled. The heating power of 8 zones, corresponding to the 8 rows of lamps, can be controlled in order to optimize the heat profile. These zones are regulated on all SBO Models. After heating, a control by infra-red camera of preform temperature enables regulation of the zones under control, thus insuring maintenance of the required temperature.

Condition: used, Year of construction: 1998, Overview This machine was built in 1998 by French manufacturer Sidel. The machine is in very good working condition, is already professionally dismantled and stored in a warehouse. Techn. Details Capacity: 7.200 bph in 1,5L Number of moulds:  6 (molds not included) Equipped with quick change for shell molds Number of heating modules: 10 modules Neck personalization: 29/25      Working hours: 47.000 only         Machine was regularily maintained       Machine equipped with:            Sidel preforms elevator to unscrambler Sidel preforms unscrambler & feeder Sidel oven & blowing wheel for 6 molds Sidel electrical cabinet Sidel PCC drive & control panel Big set of spare parts list upon request Dcsdpfxorkgy Uj Aqcsh

Condition: good (used), Burner nozzles, cutting nozzles, flame cutting system, burner, oxyfuel cutting system -Designation: HSD cutting nozzle 6 - 10 mm Acetylene 6 bar -Cutting range: 6 - 10 mm -Pressure: 5 bar -Diameter: 19 mm -Length: 47 mm -Quantity: 22 pieces available -Price/Sale: complete -Total weight: 1.1 kg Dcodeh Uhkwjpfx Aqcoh

Condition: good (used), Dissolver Vollrath Loher EC 10-6 Ex-protected version Dsdpfx Ajk Dz R Njqcsch Power 5,2 kW

Condition: excellent (used), Dissolver Loher EC 10-6 Dedjiu H S Tepfx Aqcsch Ex-protected version Power 5,2 kW

Condition: used, Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system Dedpfx Aqsh Uhk Tocech -Designation: HSD cutting nozzle 6 - 10 mm acetylene 6 bar -Cutting range: 6 - 10 mm -Pressure: 4 bars -Diameter: 19mm -Length: 47mm -Number: 43 pieces available -Total Cost -Total weight: 2.15 kg

Condition: used, Torch nozzles, cutting nozzles, flame cutting system, torches, oxyfuel cutting system -Designation: HSD PM -Cutting nozzle 6 - 10 mm 5 bar -Cutting range: 6 - 10 mm Dedpfxsh Uhlqs Aqcech -Gas: propane methane -Pressure: 5 bars -Diameter: 19mm -Length: 47mm -Number: 5 pieces available -Total Cost -Total weight: 0.25kg

Condition: used, Transformer, transformer, converter, three-phase autotransformer, three-phase transformer Dcodpjgqg H Uefx Aqcsh -Manufacturer: TAE, Transformer -Type: 6 D 130/50-10 -Number: 4 pieces available -Price: per piece -Dimensions: 110/105/H145 mm -Weight: 6,0 kg

Condition: used, Year of construction: 2008, machine/vehicle number: M301, Used CFT Oil Filling Monoblock – Comaco 6000 bph – Overview This second-hand CFT–COMACO RVAR 6/10 + TA/3 is a volumetric piston filling and press-on capping monoblock engineered for edible oil. Built in 2008 and currently in production, it is a proven asset for industrial packaging environments looking to expand or upgrade a used bottling line. We can sell it as-is (see and like) or with revamping and preventive maintenance operations to prepare the monoblock for production. Revamping & Preventive Maintenance Activities If required, the following revamping activities can be carried out to ensure reliability and readiness for production: Djdpfx Ajyhbtgeqcsch Assembly of machine parts at KBB workshop General machine cleaning General lubrication (greasing, oil level check and possible replacement) Inspection of rubber parts (belts and gaskets) with replacement if necessary Machine start-up: check of circuit integrity and correct functioning in manual/automatic modes Verification of format change equipment availability and integrity Technical Specifications & Performance Data Filler – CFT/COMACO RVAR 6/10 (volumetric) Product: Edible oil (filling temperature 10–30 °C) Filling system: 6 volumetric dosing groups (cylinders & pistons, plug valves), out-of-neck filling; max dose 10,500 cc Nozzles: 6 + 6 + 6 patented nozzles dedicated to edible oils Accuracy: 1σ = 0.6 g Mechanical data: filler pitch 377 mm; pitch circle diameter 720 mm; max container diagonal 220 mm; max height 460 mm Construction: painted steel base fully clad in AISI 304 stainless steel; AISI 304 product hopper with convex bottom and float level control Capper – TA/3 (press-on) 3 capping heads with PP320 press-on heads and positive pick (vacuum-assisted) Rated capacity: up to 6000 cph for PET press-on caps Pitch circle diameter 360 mm; machine pitch 377 mm Pick & place cap transfer; hardened steel cam for head pistons Automatic electric turret height adjustment; centralized lubrication shared with filler Two cap elevators, each with 300 L covered hopper, cleated belts, and low-level control; mobile stainless steel frames on wheels Formats, closures and indicative speeds PET: 1 L (Ø20), 2 L (Ø28), 3 L (Ø40), 5 L (Ø40), 10 L (Ø40) Tinplate: 1 L (Ø32), 3 L (Ø32), 3 L/Gallon/5 L (Ø32) Press-on caps: 31/17 (1 L PET), 38/24 (2 L PET), 51/24 (3–5–10 L PET); flex-spout common to all tinplate formats Approx. filler outputs: up to 3500 bph (1 L PET Ø20), 3000 bph (2 L PET Ø28), 2500 bph (3 L tinplate Ø32), 2500 bph (5 L PET Ø40), 2200 bph (5 L tinplate Ø32), 1100 bph (10 L PET Ø40) Advanced Automation & Control Systems Siemens PLC: SIEMENS S7 E300 with operator controls for automatic and manual modes; inverter-driven main motion with increased power to drive the capper via gears Automatic turret height adjustment (filler and capper) Micrometric volume adjustment via cam reducer; adjustable even during machine motion Volume compensation versus product temperature (automatic correction for ±2 °C delta) Per-doser volume fine correction NO CAN–NO FILL device prevents valve opening without a container

Condition: ready for operation (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: SA13E94180, input voltage: 380 V, Nordson Problue 10 suitable for up to 6 hose connections with an automatic filling system. Fully cleaned and serviced, thoroughly tested for operation, both electrically and mechanically. The filling lance, hose, and raw material container are not included in this offer but can be provided as additional items upon request. Dcedpfxjw Rd Sdj Aqcsh

Condition: used, Year of construction: 2008, power: 292 kW (397.01 HP), gearing type: other, fuel type: diesel, first registration: 01/2008, color: black, mileage: 1,001 km, driver cabin: other, emission class: euro3, Vehicle location: Bovenden, yellow environmental sticker Complete Iveco-Stralis engine with attachments. Engine number: HG 5397 Dcodevhiawopfx Aqceh The engine has run approx. 2000 operating hours! ACCESSORIES WITHOUT WARRANTY, changes, prior sale and errors excepted! - .

Condition: used, mileage: 110,313 km, power: 75 kW (101.97 HP), first registration: 09/2016, fuel type: diesel, empty load weight: 1,699 kg, maximum load weight: 600 kg, overall weight: 2,299 kg, wheelbase: 3,000 mm, color: white, gearing type: mechanical, number of seats: 2, loading space length: 2,060 mm, loading space width: 1,320 mm, loading space height: 1,090 mm, Equipment: ABS, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, Emission class: Euro 6. Engine/Power: 1,968 cm³, with turbocharger. Transmission: 5-speed. Brakes/Safety: ASR. Version: maxi, sliding door on the right. Interior features: audio system, Blaupunkt radio, tinted windows, electric windows, electric exterior mirrors, outside temperature display. Cooling body: deep freeze. Refrigeration unit: compressor/electric-powered, cooling down to -20 °C. Other equipment: power steering. ID: 118031. Engine and 220V electric drive (operation day and night). Deep freeze unit to -10°C. Sliding door on the right. Driver airbag. Electric exterior mirrors. Heated exterior mirrors. Smoker’s package (non-smoker vehicle). Electric windows. ABS. ASR. ESP. Cruise control. Wheelbase 3,000 mm. Euro 6. Radio Blaupunkt. We always have a wide selection of used refrigerated and deep-freeze vehicles in stock. More vehicles from our range can be found at [website]. Non-binding offer, sale to commercial customers only, errors and interim sale excepted. Dcsdpfx Aow H Equoqceh

Condition: used, mileage: 127,099 km, power: 75 kW (101.97 HP), first registration: 10/2016, fuel type: diesel, empty load weight: 1,699 kg, maximum load weight: 600 kg, overall weight: 2,299 kg, wheelbase: 3,000 mm, color: white, gearing type: mechanical, number of seats: 2, loading space length: 2,060 mm, loading space width: 1,320 mm, loading space height: 1,090 mm, Equipment: ABS, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, Emission standard: Euro 6 Engine/Power: 1,968 cm³, turbocharged Transmission: 5-speed manual Brakes/Safety: ASR (traction control) Version: Maxi, right-side sliding door Interior features: Audio system, tinted windows, electric windows, electric exterior mirrors, outside temperature display Refrigerated body: deep-freeze Refrigeration unit: compressor/electric drive, cooling down to -20°C Other equipment: power steering ID: 118048 Engine + electric Refrigeration unit up to -10°C Right sliding door Driver’s airbag Electric exterior mirrors Heated exterior mirrors Smoker’s package (non-smoker) Electric windows ABS ASR ESP Cruise control Wheelbase: 3,000 mm Euro 6 YouTube video link: We always have a large selection of used refrigerated and freezer vehicles in stock. More from our range can be found at Non-binding offer, sale to business customers only, subject to errors and prior sale Advertising and company logos on vehicles may have been digitally edited in photos. Dsdpfx Aqsw H T Sxjcsch