Used Por Bricc Junior Rb for sale (5,880)

Condition: excellent (used), Year of construction: 2014, The A 100 N features the same characteristics as the A6 Plus and Junior models; however, it is equipped with a larger motor and hydraulic pump, and a more advanced electrical system. General Features: - Robust construction - Very user-friendly and economical to operate - Easy maintenance - Inspection door with window - Mechanical level probe (rotary paddle switch) - Oil filter in the hydraulic circuit - Pressure gauge for oil pressure monitoring - Oil level switch - Control panel at the front of the machine - Automatic sensor for press start/stop - Emergency stop button - Circuit diagram - CE compliance - Operating manual Technical Data: - Motor power: 7.5 kW, 400 V, 50 Hz connection - Number of press cycles per minute: 14 - Throughput: 60 – 100 kg/h (material-dependent) - Briquette diameter: 65 mm - Number of hydraulic cylinders: 3 - Hydraulic tank capacity: approx. 180 liters - Hopper diameter: approx. 1200 mm Dimensions (L x W x H): 2115 x 1350 x 1700 mm Lrsdswyc H Tspfx Akusl Weight: approx. 1000 kg Including approx. 2 m briquette discharge pipe Note on used machines: - Specifications are subject to change and prior sale. - All prices are ex works – free loading at location. - The machine has been cleaned and tested for functionality. - All machines are sold as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines on site. - Special agreements are only valid if made in writing. (We will only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Vertical belt grinder RB R83 Motor power: 2.2 kW Two belt speeds Abrasive belt rotation to the right and left Belt width: 40 mm Belt length: 1700 mm Year of manufacture: 2008 Weight: 104 kg Lrodpfx Asyzhlwjkusl Technical documentation

Condition: new, maximum load weight: 31,500 kg, overall weight: 42,000 kg, axle configuration: 3 axles, Year of construction: 2025, Equipment: ABS, Wiese 3-axle semi-trailer with lift table and fold-down rear. Ideal for transporting forklift trucks and/or work platforms. Technical data. Lrodpfevw Hmtsx Akusl 3 x 10 to. axles Lift axle Steering axle Smart Steering (steers forwards and backwards) Outer beam chassis with slope 18-tonne neck design suitable for 2- and 3-axle semitrailer tractors Lifting table hydraulically movable in 3 positions Rear in folding rear design incl. hydraulic extensions, can be used as drive-on ramps, drive-over ramps or as a loading area (overall length reduction when rear is raised) Remote control for ramps and lift table Front wall Grid floor Numerous lashing points SmartBoard Central lubrication system Spray-galvanized and painted steel construction Numerous optional extras are available: e.g: Cable winch Storage box on the saddle step aluminum rims Further information on request.

Condition: good (used), Cutting range, internal thread: M 2 - M 12 Lrsdpfxsd D U T Hj Akujl Working radius approx.: 1650 mm

Condition: used, mileage: 922 km, power: 78 kW (106.05 HP), first registration: 05/2025, fuel type: gasoline, empty load weight: 1,285 kg, maximum load weight: 975 kg, overall weight: 2,260 kg, axle configuration: 4x2, next inspection (TÜV): 02/2027, color: red, gearing type: mechanical, emission class: euro6, suspension: other, number of seats: 2, Equipment: ABS, air conditioning, trailer coupling, Rear tipper, non-binding offer—modifications and interim sale reserved—the sale is made with exclusion of any warranty—all information provided without guarantee! Lrjdpfjxc Napex Akujl

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, travel distance X-axis: 2,200 mm, travel distance Y-axis: 1,750 mm, travel distance Z-axis: 750 mm, rapid traverse X-axis: 32 m/min, rapid traverse Y-axis: 32 m/min, rapid traverse Z-axis: 32 m/min, nominal power (apparent): 35 kVA, torque: 154 Nm, controller manufacturer: Heidenhain, controller model: 640, table width: 1,600 mm, table length: 2,100 mm, table load: 6,000 kg, spindle speed (max.): 18,000 rpm, operating hours of spindle: 10 h, coolant supply: 40 bar, Equipment: chip conveyor, rotational speed infinitely variable, Exhibition machine, immediately available, inspection possible near Hanover Lsdpfeylirlox Akujrl

Condition: used, New: Yes Attachment suited for: Agricultural machines Reference number: 30 Lodpox S Rz Nofx Akusrl

Condition: new, mileage: 100 km, power: 375 kW (509.86 HP), fuel type: diesel, gearing type: automatic, axle configuration: > 3 axles, overall weight: 32,000 kg, loading space length: 9,000 mm, loading space width: 2,550 mm, emission class: euro6, color: white, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, parking heater, 4-axle Volvo machine/MEWP transporter FH 500 8x2R - Trailing axle, electro-hydraulically steered, single tires - Rear axle suspension with air suspension: 1 drive axle, 1 trailing axle - High-safety long-distance FH cab - Cab auxiliary heater, 2 kW - 33 l refrigerator with freezer compartment, under bunk - Air suspension on front axle(s) - Gearbox/I-Shift operated via driver's seat control unit - I-Shift drive modes: Standard, Performance, and Economy - I-See with map-based topography and traffic information - Eco Cruise Control (cruise control) including brake cruise control - Manual gear selection possible in automatic mode (incl. kickdown) Adaptive traction control - Adaptive cruise control (ACC) with collision warning and emergency braking - Lane keeping assist - Side collision avoidance and turn assist (both sides) - Driver alert system warns of fatigue - VEB Volvo engine brake - etc. WIESE body for MEWP and construction machine transport with hydraulic loading ramps With 2 pairs of wheel recesses including covers Body dimensions: - Length: approx. 9,050 mm usable - External width: 2,550 mm - Loading height top of floor: approx. 1,050 mm unladen - Robust, weight-optimized welded steel construction, box-section design - Short cross member spacing for high point loads - Tapered rear for low ramp angle - Outer frame profile 90° - Front wall in reinforced version Lrsdpfx Akew Itmrsuel - Internal toolbox at the bottom in front of front wall - Grating floor - Designed for 5,000 daN wheel load - Steel sheet boxes above axles and outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 to., recessed into outer frame - Longitudinal members each with Multi-X contour along full length with numerous 2.5 to. lashing points - 4 lashing eyes 8 to. recessed at rear (left/right/center/center) - 4 lashing eyes 8 to. recessed in front wall (left/right/center/center) - Outer frame profile 90° Loading ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramps as 2 individual/extendable units, both ramps laterally adjustable - Ramp can be used as drive-on ramp and as through ramp for warehouse equipment (extension section remains closed), the fixed ramp part is placed on the loading dock - Robust tension bar for transport securing (alternative: strap tensioning) - 2 hydraulic rear supports with pads, with warning buzzer and indicator in cab - Ramp and support operation via electro-hydraulic system - Remote control and emergency control on the control block - Stainless steel control box mounted on frame side - Superwinch 8.2 t with approx. 20 m steel cable - Step access with grab handles left/right for cargo area access - 5 stainless steel drawer-type toolboxes, incl. lighting (option, extra charge) - Side skirting as per sample pictures (green vehicle) optional, extra charge - KTL body coating - Trailer coupling with 3.3 t ball head at rear - 4 LED work lights - 2 LED taillights mounted high on front wall - 4 external LED work lights on frame as area illumination - 2 LED work lights at rear - 1 removable rotating beacon at rear The stock vehicle is supplied with cab in white and body in nova grey (external frame painted in RAL color of your choice on request).

Condition: new, mileage: 100 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 9,000 mm, loading space width: 2,550 mm, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, parking heater, 4-Axle Volvo Machine/Platform Transporter FH 500 8x2R - Tag axle, electro-hydraulically steered, single tires - Rear axle suspension with air suspension: 1 drive axle, 1 tag axle - Safety long-distance driver cab FH - Cab autonomous heater, 2 kW - 33 l refrigerator with freezer compartment, under bunk - Air suspension on front axle(s) - Transmission / I-Shift control via driver's seat control unit - I-Shift driving modes: Standard, Performance, and Economy - I-See with map-based topography and traffic information - Eco cruise control (cruise control), including braking cruise control - Manual shifting possible in automatic mode (incl. Kickdown, adaptive traction control) - Adaptive cruise control (ACC) with collision warning and emergency braking - Lane keeping assist - Side collision avoidance and turn assist (on both sides) - Driver alert system for fatigue warning - VEB Volvo Engine Brake - Etc. WIESE body for platform and construction machine transport with hydraulic loading ramps Lsdpfx Akow Itl Uousrl - With 2 pairs of wheel recesses incl. covers Body dimensions: - Length approx. 9,050 mm usable length - External width 2,550 mm - Loading height to upper edge of floor approx. 1,050 mm unladen - Sturdy, weight-optimized welded steel construction, volume design - Short cross member spacings for high point loads - Rear tapered for low approach angle - Outer frame profile 90° - Front wall, reinforced version - Storage box inside, below the front wall - Grating floor - Designed for 5,000 daN wheel load - Above the axles: steel sheet boxes and outer frame with anti-slip coating Load securing: - 9 pairs of heavy-duty lashing rings, 8 t, recessed into the outer frame - Longitudinal beams with continuous Multi-X contour along the full length with numerous 2.5 t lashing points - 4 lashing eyes, 8 t, recessed at the rear (left/right/center/center) - 4 lashing eyes, 8 t, recessed in front of the front wall (left/right/center/center) - Outer frame profile 90° Loading ramps: Type: WFB 20 S-2 Load capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramps as two individual/extendable pieces, both laterally adjustable - Ramps can be used as approach ramps or as drive-through ramps for material handling equipment (extension section remains closed), fixed section placed onto the building ramp - Sturdy locking bar for transport security (alternative with belt tension) - 2 hydraulic rear supports with pads, buzzer and control light in cab - Ramp and support operation via electro-hydraulics - Control via radio remote control and emergency operation at the control block - Control block mounted in stainless steel tool box at side of frame - Superwinch 8.2 t cable winch with approx. 20 m steel cable - Access steps with handrails right and left for access to load area - 5 stainless steel toolboxes in drawer design, incl. lighting as option (surcharge) - Side panels as per sample pictures (green vehicle) optional (surcharge) - Body coating KTL - Ball hitch at rear, 3.3 t - 4 LED work lights - 2 LED rear lights mounted high at the front wall - 4 LED work lights on frame sides as ambient lighting - 2 LED work lights at the rear - 1 removable rotating beacon at rear The stock vehicle comes with white cab and superstructure in Novagrau (outer frame paintwork according to RAL color of your choice upon request, price on application).

Condition: new, mileage: 100 km, power: 375 kW (509.86 HP), fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 9,000 mm, loading space width: 2,550 mm, Year of construction: 2026, Equipment: ABS, air conditioning, navigation system, parking heater, 4-axle Volvo machine transporter/platform lift transporter - FH 500 8x2R - Tag axle, electro-hydraulically steered, single tires - Rear axle suspension with air suspension: 1 drive axle, 1 tag axle - FH high safety long-distance cab - Cab auxiliary heater, 2 kW - 33 l refrigerator with freezer compartment under the bunk - Air suspension on front axle(s) - Transmission/I-Shift operation via control unit on driver's seat - I-Shift driving modes: Standard, Performance, and Economy - I-See with map-based topography and traffic data - Eco cruise control (cruise control) including brake cruise - Manual shifting in automatic mode possible (incl. Kickdown) Adaptive Traction Control - Adaptive Cruise Control (ACC) with collision warning and emergency braking - Lane keep assist - Side collision avoidance and turning assistant (both sides) - Driver alert system warns of fatigue - VEB Volvo Engine Brake - etc. WIESE body for platform lift and construction machinery transport with hydraulic loading ramps Includes 2 pairs of wheel recesses incl. wheel recess covers Body dimensions: - Length approx. 9,050 mm useable length - External width 2,550 mm - Loading height top of floor approx. 1,050 mm unladen - Sturdy, weight-optimized welded steel construction, box section design - Short crossmember spacing for high point loads - Rear end tapered for low approach angle - Outer frame profile 90° - Front bulkhead reinforced version - Storage box inside front lower area - Grated floor - Designed for 5,000 daN wheel load - Steel toolboxes above the axles and outer frame with anti-slip coating Load securing: - 9 pairs heavy-duty lashing rings, 8 t, recessed into outer frame - Side rails each with Multi-X contour along entire length with multiple lashing points 2.5 t - 4 lashing points 8 t recessed at rear (left/right/center/center) - 4 lashing points 8 t recessed at front/bulkhead (left/right/center/center) - Outer frame profile 90° Loading ramps: Type: WFB 20 S-2 Lrjdew Itmlepfx Akusl Capacity: 18,000 kg per pair Platform length approx.: 4,360 mm (2,725 mm + 1,635 mm) Platform width approx.: 850 mm per ramp - Ramps as 2 individual/extendable ramps, both ramps laterally adjustable - Ramp can be used as loading ramp or as cross-over ramp for warehouse use (extension part remains closed), fixed ramp section lays onto loading bay - Sturdy locking bar as transport security (optionally with belt system) - 2 hydraulic rear stabilizers with support plate, warning tone, and indicator light in cab - Ramp and support operation by electro-hydraulic system - Control via wireless remote and emergency controls on manifold - Control manifold mounted in stainless steel toolbox on chassis side - Superwinch winch 8.2 t with approx. 20 m steel cable - Access steps with handrail right and left for deck access - 5 stainless steel toolboxes in drawer version, with lighting as optional extra - Side skirts as per sample photos (green vehicle) as optional extra - Body coating KTL - Ball-type trailer hitch at rear, 3.3 t - 4 LED work lights - 2 LED rear lights mounted at top of bulkhead - 4 LED work lights on outer chassis as perimeter lighting - 2 LED work lights at rear - 1 removable beacon at rear The stock vehicle is finished with a white cab and 'Novagrau' body (outer frame coated in RAL color of your choice on request).

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 30,000 kg, Equipment: foot remote control, 30 tons lifting capacity, self-centering, new 380V Hand and foot remote control Rotational speed 100 - 1000 mm/min. Ljdpfxjwrpfge Akusrl Diameter range 600-4500mm Drive wheel diameter 350mm x width 180 Material heat-resistant PU, non-slip Dimensions: 2350 x1460 x 1050 Double drive synchronous

Condition: new, Year of construction: 2024, load capacity: 3,000 kg, container turning device, welding table, welding turntable, roller stand Lrodpfx Akogu Edyoujl 3000 Kg load capacity with foot remote control Speed infinitely variable 80 to 1600 mm / min. diameter 40mm to 1400mm Roller diameter 200mm L: 800 x W:370 x H:450 Model or color deviation possible

Condition: excellent (used), functionality: fully functional, motor power 7.5 kW hydraulic pressing drawer hydraulic pump motor power 1.5 kW hopper dimensions 870x425 mm screen 15 mm container with opening sensor CE marking technical documentation year of manufacture 1996 Lrodoyhdm Ajpfx Akuel

Condition: new, machine/vehicle number: eca976917d325d4adc41b69e8, empty load weight: 7,200 kg, maximum load weight: 27,800 kg, overall weight: 35,000 kg, axle configuration: 3 axles, tire size: 385/65 r 22,5, Further information Chassis semitrailer forwarding Fine-grained steel welded construction in lightweight design, fifth wheel plate with replaceable 2 king pins, main frame reinforcement for 25 tons in the centre of gravity on 3 m loading length when pushed together. 13 pairs of hooks for lashing strap attachment welded onto the cross members 23 pairs of lashing eyes embedded in the outer frame, 3.5 tons each Outer frame with Load-Lock profile for lashing strap attachment Please note! Cannot be used with drop sides! 24 t. 2-speed support winch in reinforced design for loaded trailer, single-sided operation, with semicircular lower section and straight connecting plate, with thrust compensation Wheel chocks with holder Aluminum side bumper Underride guard Half-shell mudguards with anti-spray flaps according to EG 1 spare wheel holder for 1 electric wheel, with wheel mounting kit 1 closed stanchion stowage box, open at the top, below loading area, doors on both sides, w=450 mm/H=400/420 mm/t=2460 mm Lodpfx Aei Ri Szokuerl 6 pairs of extendable stanchion pockets, for 80x80 mm tubular stanchions, extendable from loading width 2000 mm to 3100 mm 4 pairs of stanchion pockets embedded in the outer frame, for 80x80 mm shaped tubes 11 stake pockets centrally recessed in the floor, for 80x80 mm shaped tubes, with reinforcement beam, each installed between the outer stake pockets 5 x 3 pairs of stanchion pockets recessed on the outside of the longitudinal beams, for 80x80 mm shaped pipes, including reinforcement beams - for securing loads to the front and rear when transporting 2x5000 mm or 2x 6000 mm construction steel mats 6 lightweight stanchions W=80/ D=80/, usable height approx. 1850 mm, hot-dip galvanized, top with cable guide for belt tensioning 12 lightweight stanchions W=80/ D=80/, usable height approx. 1850 mm, hot-dip galvanized, with lashing eyes welded to the bottom on both sides Note: stanchion pockets / stanchions are not designed for securing long materials, pipes etc. on their own without looping around them 2 plastic toolboxes, with drawer and shelf, w=650 / h=520 / d=670 mm, lockable with a padlock (lock not included) 6 construction steel winches with wire rope and counter hooks, with rope feed-through through the outer frame, 1 removable slip-on gear for construction steel winches - supplied loose (without bracket on the frame) Telescoping Main frame can be telescoped Extendable by max. 4,000 mm and can be arranged approx. every 500 mm Locking with pneumatic bolt locking + display Frame locking on both sides, actuation via hand knob, operation for brake/locking and suspension in FR-left in front of the axles Storage compartment between the side members when extended Axles + suspension SAF disc brake axles with 430 mm disc diameter Last axle self-steering, with automatic reversing lock via reversing light, and additional locking function on the vehicle via hand button, as well as manually via switch in the towing vehicle (pin 10), without truck installation. Offset axle spacing mm Air suspension 1st axle automatic lift axle, can also be operated electrically from the truck, with starting aid, without truck installation (starting aid is functional up to an axle load exceeding 30% and up to a speed of max. 25 km/h) Brake system 2-line compressed air brake system Colored cable routing for easy servicing Spring-loaded parking brake 2 swap-proof coupling heads at the front, without connecting line EBS make of the manufacturer's choice, electronic brake syst

Condition: new, machine/vehicle number: 087c7b6bc0c6118a84279fb46, empty load weight: 4,100 kg, Further information Frame Welded steel construction made of fine-grained steel, hot-dip galvanized, flat plateau without raised edges, Loading area slanted downwards by approx. 8° after the rear axle. Side members made of steel profiles, Hot-dip galvanized steel frame, with stainless steel plate at the kink as cable guide - flush with the floor. For trucks with Wheelbase: 2nd axle 5,100 mm / 2nd to 3rd axle 1350 mm Trailer coupling Towing hitch ball head D24.8: (height from floor to top edge approx. 480 mm), towing capacity 2,800 kg, incl. assembly and electrics with 7-pin socket Accessories/conversions 2 holders for wheel chocks, aluminum side bumpers, foldable - are taken from the truck! Steel underride guard, quarter-shell mudguards with mud flaps - will be taken from the truck! Storage box Plastic tool box, with drawer and shelf, w=650 Incl. / h=520 / d=670 mm, lockable with a padlock (lock not included). not included) 1 holder for 3 pcs. petrol cans 1 stainless steel storage box, w=600/h=400/t=500 mm, with polished door, incl. lockable, includes control valve. lockable, includes control valve and electro-hydraulic pump unit. pump unit. Control box with circumferential door seal and sealing sleeves on the back (splash-proof according to techn. technical possibility) Electrics Adaptation of the existing rear lights, 2 additional LED work lights, recessed in the bulkhead recessed switched via parking light with switch on front wall outside in FR-left, 1 LED work light, at the rear, with integrated reversing camera Incl. with color flat screen monitor, screen with suction cup mount and power supply via 24 volts, Voltage divider 24/12V, 1 socket 7-pin 12V = plug-in adapter Base Mega Grip made of toothed galvanized grating, steel grating 50/4 Incl. with mesh width 50 mm. Top side with anti-slip serration, laid continuously over the entire main frame plateau Lashing eyes 12 pairs of lashing rings suspended freely pivoting in the outer frame - 10 tons each. 1 x at the front and the last one at the rear. 1 piece Lashing eyelet at the very rear in the center for fastening the winch cable 12 lashing eyes centrally embedded in the floor, 5 tons each, (not included in Incl. rear sloping) Front wall Sheet steel bulkhead, height 1,500 mm. Fixed with corner pillars at front wall height. In each case 2 x 12 pcs. Suspension brackets for lashing chains mounted on the left and right of the front wall Lrodoi Riytspfx Akusl Cable winch Electric cable winch, 24 volt, pulling force approx. 6350 kg, mounted in the center of the bulkhead (recessed with loading bridge), operation with radio remote control, cable length min. 35 m x 9.5 mm, with roller rope window, with cable pressure plate, incl. overload protection, cable freewheel clutch, manual switch with approx. 5 m control lever, acceptance of the cable winch, civil engineer test report, test book, operating instructions Drive-on ramps Length 3,500 mm - 2-part (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair (also for ramp loading), electric for ramp loading), electro-hydraulically foldable and laterally movable - incl. Electro-hydraulic pump unit. Drive-on angle approx. 8° with lowered rear axle Ramp support made of hot-dip galvanized steel grating (like the floor of the loading bridge), with with anti-skid toothing. Ramps can be pushed together to approx. 170 mm, Hydraulic ramp extension. Ramp prepared for operation on loading ramp with full load capacity. Ramp locking with 2 tension belts. Ramp tip offs

Condition: new, machine/vehicle number: c78894767223a51dd199030f3, empty load weight: 4,600 kg, Further information Frame Welded steel construction made of fine-grained steel, hot-dip galvanized, flat plateau without raised edges, Loading area slanted downwards by approx. 8° after the rear axle. Side members made of steel profiles, Hot-dip galvanized steel frame, with stainless steel plate at the kink as cable guide - flush with the floor. For trucks with Wheelbase: 2nd axle 1,795 mm / 2nd to 3rd axle 4105 mm and 3rd to 4th axle 1350 mm Trailer coupling Towing hitch ball head D24.8: (height from floor to top edge approx. 480 mm), towing capacity 2,800 kg, incl. assembly and electrics with 7-pin socket Accessories/conversions 2 holders for wheel chocks, aluminum side bumpers, foldable - are taken from the truck! Steel underride guard, quarter-shell mudguards with mud flaps - will be taken from the truck! Storage box Plastic tool box, with drawer and shelf, w=650 Incl. / h=520 / d=670 mm, lockable with a padlock (lock not included). not included) 1 holder for 3 pcs. petrol cans 1 stainless steel storage box, w=600/h=400/t=500 mm, with polished door, incl. lockable, includes control valve. lockable, includes control valve and electro-hydraulic pump unit. pump unit. Control box with circumferential door seal and sealing sleeves on the back (splash-proof according to techn. technical possibility) Electrics Adaptation of the existing rear lights, 2 additional LED work lights, recessed in the bulkhead recessed switched via parking light with switch on front wall outside in FR-left, 1 LED work light, at the rear, with integrated reversing camera Incl. with color flat screen monitor, screen with suction cup mount and power supply via 24 volts, Voltage divider 24/12V, 1 socket 7-pin 12V = plug-in adapter Base Mega Grip made of toothed galvanized grating, steel grating 50/4 Incl. with mesh width 50 mm. Top side with anti-slip serration, laid continuously over the entire main frame plateau Lashing eyes 12 pairs of lashing rings suspended freely pivoting in the outer frame - 10 tons each. 1 x at the front and the last one at the rear. 1 piece Lashing eyelet at the very rear in the middle for fastening the winch cable 12 lashing eyes centrally embedded in the floor, each 5 to. (not included in Inkl. rear slope) Front wall Sheet steel bulkhead, height 1,500 mm. Fixed with corner pillars at front wall height. Each with 2 x 12 pcs. Suspension brackets for lashing chains mounted on the left and right of the front wall Cable winch Electric cable winch, 24 volt, pulling force approx. 6350 kg, mounted in the center of the bulkhead (recessed with loading bridge), operation with radio remote control, cable length min. 35 m x 9.5 mm, with roller rope window, with cable pressure plate, incl. overload protection, cable freewheel clutch, manual switch with approx. 5 m control lever, acceptance of the cable winch, civil engineer test report, test book, operating instructions Drive-on ramps Length 3,500 mm - 2-part (2,000 mm + 1,500 mm), width 850 mm, load capacity 20,000 kg / pair (also for ramp loading), electric for ramp loading), electro-hydraulically foldable and laterally movable - incl. Lodpfx Aok Unitskuerl Electro-hydraulic pump unit. Drive-on angle approx. 8° with lowered rear axle Ramp support made of hot-dip galvanized steel grating (like the floor of the loading bridge), with with anti-skid toothing. Ramps can be pushed together to approx. 170 mm, Hydraulic ramp extension. Ramp prepared for operation on loading ramp with full load capacity. Ramp locking with 2 tension

Condition: excellent (used), functionality: fully functional, motor power 7.5 kW hydraulic pressing drawer Ljdpeydpwrefx Akujrl hydraulic pump motor power 1.5 kW hopper dimensions 870x425 mm screen 15 mm container with opening sensor CE marking technical documentation year of manufacture 1996

Condition: new, mileage: 100 km, power: 324 kW (440.52 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, loading space length: 8,900 mm, loading space width: 2,550 mm, loading space height: 1,050 mm, Year of construction: 2025, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, Brand new MAN 26.440 TGX 6x2-4 LL as a construction machinery and aerial platform transporter. Truck equipment: - Long-distance driver cab - Auxiliary heater - Safety package - Driver comfort package - Storage package - Trailer package - Steerable trailing axle - LED tail lights - Euro 6e emission standard - Automatic transmission - Sun visor - Rotating beacons - Reversing camera - Multifunction steering wheel - 1 sleeper berth - Refrigerator - Media/navigation system - Flatbed – 100 km – 324 kW (441 HP) - Internal combustion engine - Diesel, automatic - Euro 6e – 4 (Green environmental badge) - 26,000 kg gross vehicle weight - Automatic climate control - White – Long distance – etc. Superstructure: - Body constructed from laser-cut and bent special profiles in low-bed design - Superstructure length approx. 8,850 mm - Frame height unloaded approx. 1,050 mm - Frame width approx. 2,550 mm - 2 loading ramps, each ramp consists of 1 fixed section and 1 extension section, ramps laterally adjustable; ramp surface made from grating; mechanical locking of ramps including mounting bracket on the outer frame for storage when not in use (optional securing with straps) - Ramp operation via electro-hydraulic unit, including emergency control on the control block as well as hand pump in case of total failure - Hydraulic rear supports - All hydraulic functions operated by radio remote control - Grated floor with increased load capacity - Rear end with taper; front wall approx. 2,000 mm high with inward-flanged profiles - Stainless steel tool box inside in front of the front wall - 2 stainless steel tool boxes mounted to the side of the frame for lashing equipment (1 left, 1 right) - 1 stainless steel tool box at the rear right (for hydraulic unit and control block) - Work lights: 1 pair on rear of cab, 2 pairs on each side of the frame, 2 pairs at the rear - 2 step ladders for accessing the load area Load securing: - Longitudinal beams incl. Multi-X contour with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the longitudinal beams - Outer frame, perforated version, with 2.5 t lashing points - 6 pairs of 6 t lashing points integrated into the outer frame - 4 x 6 t lashing points at the rear - 4 x 6 t lashing points at the front, below the tool box in front of the front wall Paintwork: - Superstructure cataphoretic dip primed and powder-coated in RAL 9005 black Lredpfxet T H Sks Akuel - Front wall painted in RAL 9005 black - Ramps and grating are hot-dip galvanized Markings: - Reflective tape applied on the sides and rear in accordance with EU regulations. Further information available on request.

Condition: excellent (used), Briquetting machine POR Oscar 9kW Average briquette output: 130-180 kg Briquette diameter: 70 mm Motor power: 9 kW Feeding hopper diameter: 1170 mm Technical documentation CE mark Lsdpfx Asxdahyekuorl Machine weight approx. 800 kg

Condition: like new (used), Year of construction: 2017, functionality: fully functional, travel distance X-axis: 2,120 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 800 mm, controller manufacturer: Heidenhain, table width: 1,100 mm, table length: 2,000 mm, spindle speed (max.): 10,000 rpm, DOUBLE COLUMN MACHINING CENTER WELW TECHNICAL SPECIFICATIONS Brand: Wele Model: RB-212 Year: 2016 CNC: Heidenhain iTNC 530 Table: 2000 x 1100 mm Travel X / Y / Z: 2120 x 1200 x 800 mm Table load: 3500 Kg Taper ISO 50 - 10,000 rpm Internal air / coolant cooling: 40/80 Bar Distance between columns: 1,300 mm - External air and coolant cooling (40/80 bar) - Head power control module Lsdjy Rqduopfx Akujrl - Preventive maintenance current: oil, filters, coolant replaced as specified by manufacturer or depending on usage - Blum TC50 probe - Spindle and X, Y axis bearings replaced at 9,108 hours - Coolant gun - Spindle-to-table distance 150mm / 950mm - Distance between columns: 1,300mm - Air conditioning instead of heat exchanger - Manual handwheel - Centralized lubrication with oil collector

Condition: good (used), Technical data: Briquetting press RUF RB 440 Press capacity when pressing wood: up to a maximum of 440 kg/hour Material moisture: maximum 15 % Motor power: approx. 30 kW Briquette size; rectangular: 150 x 60 mm Lredpfx Aot H D Ezokuol Length: 40 - 110 mm Dimensions approx. 1680 x 1800 x 2000 mm Weight: 3000 kg

Condition: good (used), Year of construction: 2001, Good, used condition Low operating hours (1,675 h) Motor: 11 kW Pressure: adjustable up to a maximum of 250 bar Throughput: up to max. 220 kg/h Briquette size: 150x60 mm Press dimensions: approx. 2200x3000x1920 mm (LxWxH) Control cabinet dimensions: 500x1250x2120 mm (LxWxH) Weight approx. 3,000 kg Lredpfx Akswcc D Reusl

Condition: excellent (used), functionality: fully functional, next inspection (TÜV): 08/2027, Year of construction: 2018, Equipment: UVV, Roofer lift – furniture lift – special model by Böcker Junior 24K/0-7 This special model can be operated electrically with standard power or by petrol engine. Ljdsy Swalspfx Akujrl The lift has very few operating hours and was almost always stored in a dry warehouse. UVV inspection was passed without issues in April 2026. TÜV inspection was completed last year. VAT is deductible.

Condition: used, Year of construction: 1989, Used machine Ledpfswkba Hex Akusrl Year of manufacture: 1989 Equipment and technical data: - 2-jaw drill chuck for up to 20 mm shank diameter - Pneumatic position adjustment on 2 levels, 0-100 mm - Max. drilling depth 150 mm - Precision indexing rail 12 mm - Central locking and cross adjustment - 2 pneumatic safety clamping cylinders - Motor 1.5 kW - Speed 2800 rpm Dimensions (without stop): 1100 x 1100 x 1500 mm Weight: approx. 310 kg Availability: short-term Storage location: Röllbach

Condition: used, Used machine Used row drilling machine of the company Ganner type RB 107 serial no.: 121627 Motor power: 1,5 kW Motor speed: 2800 rpm 1 drill beam with 26 spindles, center distance 32 mm 3 hold-down devices Ljdpfsw I Unwjx Akujrl 1 foot switch Availability: short term Location: Röllbach