Used Posch Spaltfix K-600 Vario + Packfix for sale (46,528)

Year of construction: 2000, condition: ready for operation (used), Travel X/Y/Z: 900mm/800mm/1020mm, rapid traverse: 50m/min, speed: 10000rpm, plate dimensions X/Y: 630mm/630mm, max. tool diameter: 300mm, max. swivel diameter: 1000mm, max. table load: 1200kg, tool positions: 300, tool holder: HSK 100, motor power: 35kW, machine weight: approx. 16000kg. Including chip conveyor, compressed air preparation panel, hydraulic-pneumatic system, cooler and various spare parts. Documentation available. On-site inspection is possible. Iodpfjv Rp Tiox Ag Aetn

Condition: used, Weiss   Type: WK111-600   Weiss Climate Testing Chamber, Air-Cooled   Performance data for temperature tests:   Temperature range: -5°C – +90°C Temperature fluctuation over time: ± 0.1 to ± 0.5 K Temperature deviation spatially: ± 0.5 to ± 1 (corresponds to temperature gradient) 1 to 2 Temperature change rate: Heating: 0.5 K/min Cooling: 0.2 K/min   Performance data for climate tests   Temperature range: +10 to +90°C Humidity range: 10 to 98 % RH Temperature fluctuation over time: ± 0.1 to ± 0.3 Temperature deviation spatially: ± 0.5 to ± 1 (corresponds to temperature gradient) 1 to 2 Humidity fluctuation over time: ± 1 to ± 3   Test chamber dimensions: Width 800 mm x Depth 800 mm x Height 950 mm Housing dimensions: Width 1000 mm x Depth 1660 mm x Height 1975 mm Feedthroughs 1 feedthrough ∅ 50 mm, installed on the left 1 feedthrough ∅ 125 mm, installed on the right   Power supply: 1/N/PE AC 230V ±10% 50Hz Rated power: 2.3 KW Rated current: 10.0 A Refrigerant: R 404 A 600 liters Weight: 540 kg   For your safety as a buyer, please note the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run.   Condition: used   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   Iodpfx Aeziyxcjg Ajtn We will gladly answer any further questions you may have on the phone.

Condition: used, Weiss Type: WK11 - 600/70/5 Weiss Climate Chamber, Water-Cooled The Weiss climate chamber WK11-600/70/5, with an approximate usable volume of 600 liters, is suitable for temperature and humidity testing as well as for conditioning samples and materials in the range of -70 °C to +180 °C. Simcon/32 - Net Controller Technical Data: Iedjzimg Hspfx Ag Astn Test chamber designation: WK11-600/70/5 External dimensions with hinges and door closure: Height 1995 mm, Width 1090 mm, Depth 1660 mm External dimensions without hinges and door closure: Height 1995 mm, Width 1000 mm, Depth 800 mm Internal dimensions: Height 950 mm, Width 800 mm, Depth 800 mm Connections: 2x R1 NW 125 mm ∅ 1x L1 NW 50 mm ∅ Test chamber volume: approx. 600 liters Data for temperature tests: Temperature range -70 °C to 180 °C Temporal temperature deviations in the center of the usable space: ± 0.1 to ± 0.5 K Spatial temperature deviations: ± 0.5 to ± 2 K Temperature gradient: 1 to 4 K Temperature change rate: Heating: 6 K/min Cooling: 6 K/min Thermal compensation: at +20 °C: 5000 W at -20 °C: 5000 W Data for climate tests: Temperature range +10 to +95 °C Humidity range 10 to 98 % RH Temporal temperature deviations in the center of the usable space: ± 0.1 to ± 0.3 K Spatial temperature deviations: ± 0.5 to ± 1 K Temperature gradient: 1 to 2 K Temporal humidity fluctuation in the center of the usable space: ± 1 to ± 3 % RH Thermal compensation: 500 W 3/N/PE AC 400V ±10% 50Hz Rated power: 16.5 kW Rated current: 29 A Fuse on customer side: 32 A slow-blow Permissible weight of test specimen: Total load of the shelf supports: 80 kg Test chamber floor: 80 kg, insert shelf: 40 kg Weight: 675 kg Refrigerant: R452A / R23 Important note: "The table shown in the photos is not included in the sale." For your safety as a buyer, please note the following information! The following points will be carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss   Type: WK-600/70 (I)-(II) 2 G EEx /22605147   Weiss Climate Chamber, Water-Cooled   (Test chamber, explosion-proof) INERTING WITH NITROGEN / EXPLOSION-PROOF TEST CHAMBER   Technical Data: Test chamber designation: WK-600/70 (I)-(II) 2 G EEx   External dimensions with hinges and door closure Height 1995 mm, Width 1090 mm, Depth 1660 mm   External dimensions without hinges and door closure Height 1995 mm, Width 1000 mm, Depth 1660 mm   Test chamber volume: approx. 600 liters   Cold / Heat operation -70 to 180°C   Climate operation 10 – 95°C Humidity 10...98 % RH Temperature change per unit of time Cooling approx. 2.5 K/min Heating approx. 4 K/min   3/N/PE AC 400V ±10% 50Hz Rated power: 14 kW Rated current: 25 A Fuse, customer-supplied: 32 A slow-blow Permissible test item weight Total load of the grid supports 80 kg   Test chamber floor 80 kg, insert grid 40 kg   Weight: 800 kg   Refrigerant: R 404A/R 23   (Evaporator of the air conditioning system has been replaced)   For your safety as a buyer, here is the following information!   The following points are carried out on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If necessary, new filling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers are subjected to a documented test run.   Condition: used   Itsdpfx Agezh D Rye Aon Scope of supply: (See picture)   (Changes and errors in the technical data and information are subject to change!)   We will gladly answer any further questions you may have by phone.

Condition: used, 2x KWB Powerfire TDS 300 Wood Chip Boilers – approx. 600 kW For sale are two KWB Powerfire TDS 300 wood chip boilers, which were operated together in a cascade system. 👉 Total output: approx. 600 kW — Technical Highlights: • Rotary grate combustion system – robust, self-cleaning • Cyclone combustion chamber – clean combustion, low emissions • Lambda control – optimal efficiency • Fully automatic output modulation • Automatic heat exchanger cleaning • KWB Comfort 3 control system • Suitable for both wood chips and pellets — Advantages of the Cascade System: • Flexible performance adjustment as required • Very efficient in partial load operation • Each boiler can be operated independently • Redundancy / operational reliability — Scope of Supply: ✔ Includes feed auger on both boilers (ca. 1 m screw conveyor with drive motor, mounted directly on the boiler – feeds fuel directly into the combustion chamber) ⚠️ Note: No discharge / conveying system (fuel extraction from store) → available on request at additional cost — 📍 Location: Mosonmagyaróvár, Hungary 👉 approx. 80 km from Vienna 👉 approx. 35 km from Parndorf TOP HEATING SYSTEMS – Used heating systems, boilers, heat pumps & accessories direct from stock We are a family business with around 20 years of experience in heating technology. Our 1,500 m² warehouse in Mosonmagyaróvár, Hungary, maintains a permanent stock of approx. 50–60 units. 📍 Location: Our warehouse is located in Mosonmagyaróvár, Hungary – approx. 15 km from the Austrian border and approx. 80 km from Vienna. Mosonmagyaróvár is the first major city after the Austrian-Hungarian border. 🔥 Our product range includes: • Wood chip boilers • Pellet boilers • Log gasification boilers • Log boilers • Biomass boilers • Oil and gas boilers • Heat pumps • Thermoventilators • Hot air blowers • Warm air heating units • Industrial heaters • Buffer tanks • Heat exchangers • Screw conveyors • Fuel extraction systems • Burners • Pumps • A comprehensive range of heating accessories ⚙️ Accessories and Components: We also offer a broad range of accessories, including circulation pumps, plate heat exchangers, and many other components for private to industrial applications. 🏭 Brands in our portfolio: Fröling, Hargassner, KWB, HDG, Binder, ETA, Herz, Guntamatic, Windhager, Viessmann, Buderus, and many more. 🌐 Current offers: Most of our current offers can be found on our website: topheatingsystems.com We also have additional equipment in stock that is not yet listed online. 📅 Inspection: Viewing at our warehouse is possible by appointment. Ijdpfx Agjy A Ewts Astn If interested, please contact us – we look forward to helping you find the right solution.

Condition: excellent (used), Year of construction: 2017, Böllhoff Uniquick Vario screw feeding machine UNIQUICK Feeder Type 360 Plastic sorting container, ∅ 360 mm Itjdpfxowbr N Hj Ag Aon Quiet and surface-friendly conveying Optimal helix dimensioning depending on the conveyed material (width and height) Integrated and controlled baffle High wear resistance Consistent conveying performance through amplitude control In a sound-insulated housing on a frame Belt width: 20 mm Head diameter of the fastener up to 20 mm Length of the fastener up to 55 mm Filling volume: 3 l SIM BB-10-C (ws) belt bunker Bunker container, chute: stainless steel Belt: white, FDA-approved Filling volume: 10 liters Max. filling weight: 35 kg Drive: AC gear motor 230V / 50Hz Bunker with innovative drive to ensure a metered, quiet and component-friendly feed of screws and fasteners. UNIQUICK Multi Modular expandable 3-way diverter Distributes the inspected screws to three stationary screwing machines Singulation Adapted outlet chute Precise guidance at the head Modular design Few format-dependent parts Reproducibility of the component Sensor monitoring Maintenance-free Noise reduction Screw conveying in a plastic container Lining with noise-reducing material Airtight injection of screws Compressed air maintenance unit Compressed air connection: 6 bar Power supply: 230 V AC Year of manufacture: 2017 Dimensions: HxWxD 1050 x 650 x 650 mm Technical data You can find more new and used items in our shop! International shipping costs on request!

Condition: excellent (used), Year of construction: 1999, BATTENFELD PE/PP PIPE HEAD PO 250 / 600 SI Type: PO 250/600 SI. Screen basket Ijdpjvy It Tsfx Ag Aotn Year of manufacture: 1999 Little used Condition: Very good, needs cleaning With co-extruder Extrudex EN 25, year of manufacture 1999 For color strips The system is my property Location: Sachal Extrusionsmaschinen Bahnhofstr 6 D-26345 Bockhorn-Grabstede

Condition: excellent (used), Year of construction: 2013, Weinig Powermat 600 automatic profiling machine, net price €68,800. Technical data: Year of manufacture: 2013 Working width (with a cutting circle of 93 - 125 mm): 20 - 230 mm Working height (with a cutting circle of 93 - 125 mm): 10 - 120 mm 7 spindles First lower horizontal spindle: 5.5 kW (7.5 HP) motor First right vertical spindle: Shared motor with the left vertical spindle: 11 kW (15 HP) First left vertical spindle: Shared motor with the 1st right vertical spindle Second right vertical spindle: 5.5 kW (7.5 HP) motor First upper horizontal spindle: 7.5 kW (10 HP) motor Second upper horizontal spindle: 7.5 kW (10 HP) motor Second lower horizontal spindle: 5.5 kW (7.5 HP) motor Electronic feed with brake, steplessly adjustable: 5 - 30 m/min Motor: 4 kW (5.5 HP) Operating voltage: 400 V (voltage range 380 - 420 V), 50 Hz All spindle motors are IE2 rated. Itjdpsytd S Nefx Ag Asn All spindles with high rotational accuracy. Standard equipment for PowerLock. Planing table length: 2 m (including a longitudinal guide) Marathon Coating for the machine table and guides Special coating for protecting the table segments and guides against excessive wear. Recommended for machining abrasive materials (e.g., tropical wood, MDF, chipboard). OPTION TO PURCHASE THE FOLLOWING MACHINES AT INDIVIDUAL PRICES: 1. WEINIG OptiControl 970090 tool measuring station, net price €7,650 Specifications: Tool diameter min. 90 mm Tool diameter max. 300 mm Tool length: 0 - 240 mm Radial measuring range (radius): 150 mm Non-contact measurement of tool dimensions, radius (R), and height (H), with display on electronic digital displays. Electronic digital displays indicating tool radius and height. HSK63 tool holder for PowerLock tools NEW: PowerLock HSK63 adapter, shank D=50 x 260 mm 2. ROUTER HEADS WITH POWERLOCK MOUNTING, price €7,500 Two cabinets full of router heads for various applications, approximately 45 pieces.

Year of construction: 2004, condition: good (used), Composed of: • Weigher/divider/tedder. For all types of masses. Automatic greaising system. Adjustable weight 60 to 600 gr • Pesadora/divisora/heñidora. Para todo tipo de masas. Sistema automático de engrase. Peso ajustable de 60 a 600 gramos. Variador de velocidad. • 40 Kg Hopper for dough, made of stainless Steel and non-stick material • Flour sifter • Digital piece counting Itsdjwcfq Hepfx Ag Ajn • Resting chamber with 400 baskets • Bread loaf former, tape width 600 mm.

Condition: used, Year of construction: 2015, - Feed rate: maximum 40 m/min - Motor power: 5.5 Kw - Working length: 7.35 meters Miter saw Manufacturer: Tigerstop Type: UKA 600 Year of manufacture: 2015 Tiger UKA 600 miter cutting system consisting of: Tiger Stop 7.5 automatic feed and stopper Overall length: 7.95 meters Working length: 7.35 meters Net working length (automatic saw): 6 meters Voltage: 220 volts 50 Hz Motor power: 0.45 Kw Feed rate: maximum 40 m/min (depending on the load) Accuracy: +/- 0.4 mm as a sliding guide. Infeed table for TigerStop 6.8 Overall length: 7.4 meters Table width: 325 mm Upward stroke miter saw model UKA 600 with pneumatic lift and clamping device Saw unit mounted on a rotary table with diameter: 980 mm Diameter of the saw blade: 600 mm Cutting capacity: 165 x 240 mm at 90 degrees Maximum cutting height: 165 mm at the fence and 175 mm diameter (at 90 degrees) for round material Cutting angle: 30 - 90 - 30 degrees 45 - 90 - 45 degrees with automatic function Motor power: 5.5 Kw Voltage: 400 volts 50 Hz Working height: 920 mm The machine is controlled by a push button for semi-automatic operation or fully automatically for 90-degree angles via the TigerStop. The rotary table is controlled by a Tigerstop servo drive TigerDrive. Outfeed/infeed table with side protection Length: 3.7 meters Width: 325 mm PC control with Beamworks program, computer with touch panel and computer cabinet. Cutting list download option for csv file. Extension with 6-strand flipper loading device For automatic loading of material with a length of 500 - 6000 mm. Shorter pieces can be placed directly on the infeed table. Loading device consisting of: 6 flipper beams with tables including the 2 aluminum profiles 80 x 40 mm per beam, the flippers, the connecting tube, 1 pneumatic cylinder with 24-volt valve. The net loading length is approximately 1.38 m. 1 additional support strand without flipper on the outside of the loader 2 extra cylinder set for the loading device Complete electrical control cabinet with PLC, power supply, Itodpfszuyx Hex Ag Aon Emergency stop safety relay, complete wiring etc. (Including additional electrical wiring for the safety fence door) Label printer package for Beamworks Safety fence on the back of the machine, only on the infeed side. Including entrance door with safety lock And additional protective device on the front to prevent intrusion between the loading strands. Product length measurement with sensor in the protective cover, controlled by the Tigerstop control. The length measurement and download with Tigerlink only work with 90-degree cuts. Tigerlink download software for downloading a csv file (cutting list). Note: The technical data and descriptions are a transcript of the order confirmation at the time. Data is for informational purposes only and is not binding.

Condition: reconditioned (used), Year of construction: 1998, functionality: fully functional, Double rotor round log debarker with infeed VK-600, rotor opening 620 cm warranty time 6 month from delivery, delivery time 8-10 weeks from order. Two debarking rotors, speed up to 120 m/min. Currently machine is under renovation Itodpfx Aepbbmleg Aen

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Vertical piston compressor with sound-dampening hood, DK 600Eco UNM STS 660-10-270 - Year of manufacture: 2013 - With mounted refrigeration dryer, 660 l intake capacity, 520 l delivery rate - 10 bar Itodpfx Agsypkr Uo Asn - Weight 245 kg - Sound-dampening hood - Condensate drain 4 kW, 400 Volt - Width 960 mm, Depth 740 mm, Height 1905 mm - Noise level 69 dB (A) - Very few operating hours - ABSOLUTELY LIKE NEW - TÜV inspection valid until August 2026, with corresponding inspection certificates Transportation available for an extra charge!

Condition: used, Year of construction: 2011, Perfect binding line Kolbus KM 600 Year: 2011 Consisting of Gathering machine Kolbus ZU 804 Description: - Hand feeding station - Number of gathering stations: 20 - Optical sheet control: Sygna-Lynx - Air center: Becker - Set up element - Reject gate for incomplete products Perfect binder Kolbus KM 600 Product counter: approx. 12.800.000 Description: - Semi automatic setting - Co-Pilot with touch screen - Number of clamps: 21 Iodsy Uvfrjpfx Ag Aetn - Main milling station - 1st spine preparation station - 2nd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375 - Base for side glue system - Hotmelt side glue unit, interchangeable - Cover feeder: RA 49.A - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus - Transport system, length (approx): 20 mtr - Escape delivery Three knife trimmer Kolbus HD 143.P Year: 2011 Product counter: approx. 12.570.000 Description: - Co-Pilot with touchscreen - Infeed conveyor from the right - Automatic hopper feeder for inline production - Cut counter - Product counter - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set) In the photos, you can also see a side stitching unit. This type of side stitching is mainly required for the production of school books in the Middle East. This unit is not included in the offered price but is available at an additional cost on request.

Year of construction: 2018, condition: used, Computer monitor, screen, TFT industrial monitor -Monitor: TFT industrial monitor from CNC milling machine Mikron UME 600 -Type: 12.1" TFT industrial monitor 2363130 -Dimensions: 400/320/100 mm -Weight: 3.1 kg Itedercnmzopfx Ag Ajn

Condition: good (used), Year of construction: 2009, Manufacturer: Audion Elektro Type: AVP 600-2 Year of construction: 2009 Power 0.7kW AUDION Veggiepack is a unique semi-automatic packaging machine for round vegetables, such as lettuce, cabbage, broccoli, cauliflower etc. The product is dense polypropylene or they are wrapped in styrofoam so that no unnecessary foil is left around the product. The product is protected from damage and the round packaging underlines its appearance. Product features: Sealed at the bottom of the product Empty foil and product separately Film positioning with photocell sensor Fast warm-up time No air compressor required Adjustable packing density AVP 600 specifications The size of the machine (HxWxH): 1230x830x960mm Machine weight: 220 kg Sealing bar: heat seal Film: (perforated) CPP, OPP, polystyrene Foil thickness: approx. 15 microns Foil width: 520-600 mm Product Length: Up to 220mm Product Height: Up to 175mm Production capacity: Max. 550 / hour Voltage: 230V / 1ph / 50Hz Power consumption: 700 watts Itsdpsht Hkksfx Ag Aen

Condition: good (used), Year of construction: 2003, operating hours: 15,630 h, Linde H45D-04/600 triplo595 / side shift / fork adjuster / 2003 / 15,630 hours DIESEL A video can be sent via WhatsApp. We have a continuous supply; see our website. Prices are quoted ex Nuland. Isdpfxezyauxo Ag Astn Van de Wert Trading B.V. has a varying stock of machines, trucks, trailers, and attachments. All our deliveries are at trade prices in AS-IS condition without any guarantees (see our general terms and conditions). You can make a non-binding appointment for a viewing and/or test drive. Please call in advance, as we are not always available. Van de Wert Trading B.V. Bedrijfsstraat 3 5391 LR Nuland

Condition: used, Year of construction: 2020, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, cutting height (max.): 150 mm, cutting width (max.): 600 mm, saw blade diameter: 425 mm, chain width: 600 mm, - Operating manual, CE - Year of manufacture: 2020 TECHNICAL SPECIFICATIONS: - Minimum thickness of processed beam: 50mm - Maximum thickness of processed beam: 150mm - Maximum width of processed beam: 600mm Itjdpex Dkyyjfx Ag Asn - Minimum length of beam: 1200mm - Diameter of lower spindle: 70mm - Maximum saw blade diameter: 425mm - Spindle motor power: 30kW - Feed drive motor power: 2.2kW - Infeed roller table dimensions (width/length): 700 x 3000mm, roller length 640mm - Outfeed roller table dimensions (width/length): 700 x 3000mm, roller length 640mm - Spindle motor speed: 1420 rpm - Feed motor speed: 1420 rpm - Upper sawdust outlet diameter: 200mm - Lower sawdust outlet diameter: 200mm - Supply voltage: 3x400V, 50Hz Overall dimensions: - Length: 2980mm - Width: 1250mm - Height: 1670mm

Condition: like new (used), Year of construction: 2022, 600 kg load capacity, height-adjustable welding rotary table with through-hole, 100–200 mm Plate diameter: 700 mm Horizontal height: min. 0.65 m, max. 1.25 m Tilted height: min. 0.45 m, max. 0.95 m Speed: 0.01–1.1 rpm Tilt angle up to 135° Hand and foot remote control with speed display Very robust Itedpfxjd Anz Ro Ag Aon

Condition: good (used), Year of construction: 2013, Vibratory finishing machine, vibratory finishing system, vibratory finishing machine, vibratory finishing rotary vibrator, vibratory finishing system, continuous vibrator, vibratory conveyor, vibratory feeder, conveyor trough, spiral conveyor -Round vibrator: with soundproof hood and spray device -Manufacturer: KAYAKOCVIB, Round vibrator type KVM 600 -Work container: elastically mounted Itjdpfxjzhxduj Ag Aon -Total volume: 600 liters -Outer diameter: 1360 mm -Work basin width: 430 mm -Work basin height: 570 mm -Accessories: Soundproof hood, spray device, speed controlled, pneumatic separator flap -Machine for: Deburring, polishing, edge rounding -Machine dimensions: 1650/2230/H1330 mm -Dimensions of the control box: 780/1070/H280 mm -Weight: 1395 kg

Condition: used, mileage: 171,821 km, power: 100 kW (135.96 HP), first registration: 12/2003, fuel type: diesel, brakes: retarder, color: white, gearing type: mechanical, emission class: euro3, number of seats: 8, Year of construction: 2003, Equipment: ABS, air conditioning, parking heater, Refurbished and newly painted MB Vario 814D from government/federal police ownership. Equipped as a bus (group vehicle) MR / high-roof with full air conditioning and auxiliary heater, ABS, driver airbag, and differential lock on the rear axle, as well as a retarder, which is an electrically operated, wear-free eddy current brake for speed adjustment. We completely refurbished the body in our own workshop and professionally repainted it in two colors. Only the center section of the roof is still original. For such work, we employ a qualified body builder as well as a qualified vehicle painter. In the area of body repair, we are able to manufacture sheet metal in any form and weld it in professionally using a low-distortion welding process at low temperatures. In our special 18-meter long and 6-meter high paint booth, we can also professionally powder-coat such large vehicles at 80°C. This ensures high quality and a vehicle that retains its value, and you will enjoy it for a long time. Iedpsz Nuhwefx Ag Astn We have replaced the windshield and the crank windows in the cab with real glass. Thanks to its good insulation properties, the plastic glazing on the side windows and in the rear of the vehicle can remain. Technically, this Vario has been recently serviced and is in good condition, with no pending repairs - it has been consistently maintained according to the service schedule. The last inspection was carried out in 09/2025 at 171,635 km, the last engine oil change in 10/2024 at 169,714 km. Currently, the front brake pads have been replaced, the tires have been renewed (M+S as steering profile), the chassis has been lubricated, and the cartridge of the air dryer has been replaced. The tires on the rear axle (M+S) have a tread depth of 8.0mm. All components such as the engine, transmission, and rear axle are dry. The air conditioning and auxiliary heater are functional and very effective: 1.) The air conditioning has two evaporators and vents above each seat in the passenger compartment. 2.) The auxiliary heater is a hot water circulating heater with convectors in the passenger compartment for draft-free heating. Maximum speed Vmax according to registration certificate: 120 km/h. A total of 11 seats, the seats in the passenger compartment are designed as reclining seats - with adjustable backrests and armrests; furthermore, the left inner seats can be moved inwards on the console by approximately 10cm to provide more room. A total of three effective roof hatches. Interior dimensions from the driver's seat: 4000 x 1850 x 1900 mm (LxWxH). For an additional cost of 750 €, we can carry out a technical modification to convert it into a motorhome. Due to space constraints, up to 8 seats are possible. In this context, the Vario will also receive a 220V external power connection. We will provide the Vario with a new TÜV/AU (technical inspection/emission test) certificate upon delivery - it drives well and the transmission can be shifted precisely. +++Errors, changes, and prior sale are subject to change.

Condition: used, cools with ambient temperature all stainless steel adjustable speed total length ± 5.000 mm Ijdpez Ry N Asfx Ag Aetn nett belt length ± 4.000 mm nett belt width ± 600 mm stainless steel mesh wire belt outside dimensions (l x w x h) : ± 5.000 x 1.000 x 1.500 mm

Condition: used, mileage: 60,784 km, power: 100 kW (135.96 HP), first registration: 12/2002, fuel type: diesel, brakes: retarder, color: white, gearing type: mechanical, emission class: euro3, number of seats: 11, Year of construction: 2002, Equipment: ABS, parking heater, Beautiful MB Vario 814D from official ownership / state police: Iedpfoyxuv Dex Ag Ajtn +++ Bodywork thoroughly refurbished and partially repainted on the lower sections +++ Version configured as a bus (group transport vehicle) MR / high-roof with auxiliary heating, driver airbag, ABS, and differential lock on the rear axle, as well as a retarder. The retarder is an electric, wear-free eddy current brake for speed adjustment. The bodywork was professionally repaired and then the rear section was partially repainted in our own workshop. We disassemble the vehicles beforehand and, for example, permanently seal the body seams with elastic material after painting. The chassis/frame of this Vario was also partially de-rusted and painted by us, and finally protected with wax for long-term preservation. Additionally, this Vario received a fresh inspection, including engine oil and brake fluid change, all four batteries replaced, and a new air dryer for the braking system. Furthermore, the plastic glazing in the cab was replaced with genuine glass. Due to their good insulating properties, the plastic windows were retained in the rear section. An ideal base for a spacious motorhome — the technical conversion to "So-KFZ Wohnmobil" registration (special-purpose vehicle/motorhome) can be carried out for you for an extra charge of €600. In this context, the vehicle would also receive an exterior 220V power connection with RCD/FI circuit breaker and two interior sockets. General information about the MB Vario 814D: The auxiliary heating works very efficiently: This is a hot water circulation heating system with convectors in the passenger compartment for draft-free heating. Top speed thanks to long axle ratio: according to paperwork, vmax 120 km/h. Total of 11 seats; the passenger compartment seats are comfortable recliners — with adjustable backrests and armrests. In addition, the left inner seats can be shifted about 10 cm into the aisle for more freedom of movement. There are three effective roof hatches in total. Interior dimensions from the driver’s seat: 4000 x 1850 x 1900 mm (L x W x H) +++ Subject to error, changes, and prior sale +++

Year of construction: 1988, condition: used, Wagner EKG 1.000/600 Electric forklift Year of manufacture: 1988 Load capacity: 1,000 kg Weight: 2,190 kg Availability: short notice Itjdpfx Ajx Tkgzeg Aon Location: Flörsheim

Year of construction: 1995, condition: good (used), 600 mm rotor width Itsdpofxg Dlofx Ag Aen 7.5 kW motor 650 rpm

Condition: used, mileage: 150,351 km, power: 100 kW (135.96 HP), first registration: 01/2003, fuel type: diesel, brakes: retarder, color: white, gearing type: mechanical, emission class: euro3, number of seats: 11, Year of construction: 2003, Equipment: ABS, air conditioning, parking heater, Well-maintained MB Vario 814D, previously owned by a government agency/federal police. Equipped as a bus (group transport vehicle) with a raised roof, full air conditioning, auxiliary heater, ABS, driver airbag, and a differential lock on the rear axle, as well as a retarder – an electrically powered, wear-free eddy current brake for speed adjustment. The body only has minor surface rust on the lower edges of the sills – no holes are present. There is a slight bulge on the rear wheel arch, but this is not relevant for the TÜV (technical inspection). Technically, this Vario is in excellent condition and does not require any immediate repairs – it has been consistently maintained according to the service schedule. We have already replaced both starter batteries, and before the sale, we will replace the windshield with a real glass one, making it suitable for private registration. Thanks to its good insulation properties, the plastic glazing on the side windows and in the rear of the vehicle can remain. The air conditioning and auxiliary heater are functional and very effective: 1) The air conditioning system has two evaporators and vents above each seat in the passenger compartment. 2) The auxiliary heater is a hot water circulation heater with convectors in the passenger compartment for draft-free heating. Maximum speed according to documentation: 120 km/h. A total of 11 seats, with the seats in the passenger compartment designed as reclining armchairs – with adjustable backrests and armrests. Furthermore, the left inner seats can be moved forward by approximately 10 cm on the console for more freedom of movement. A total of three effective roof hatches. Interior dimensions from the driver's seat: 4000 x 1850 x 1900 mm (LxWxH). Ijdpfxezmqnps Ag Astn For an additional charge of €750, we can carry out a technical modification to convert it into a camper van by removing some seats. Due to space constraints, a maximum of 8 seats are possible. In this context, the Vario will also receive a 220V external power connection. +++Errors, changes, and prior sale are subject to change.