Used Pramac Ey 20L for sale (3,403)

Condition: new, Year of construction: 2023, functionality: fully functional, input frequency: 50 Hz, Make: PRAMAC GDW 465 Sound pressure at 7 m DB(A): 67 Sound power LWA DP(A): 96 Continuous power106.15 kVA / 84.92 kW Voltage: 230 / 400 Volt Frequency: 50 Hz Knjdpfjq A U Afex Andea Diesel engine: Perkins 1104D-E44TAG2 Exhaust stage IIIA only stationary operation permitted! Cooling system: Water Cylinders: 4 in series Displacement: 4400 cm³ Intake system: Turbocharged Engine speed: 1500 rpm Engine control: Electronic Consumption 3/4 load: 17.03 l/h Consumption at full load: 24.73 l/h Fuel tank capacity: 209 l Generator: MeccAlte ECP 34-2S or equivalent Type: Brushless Number of poles: 4 Control: Electronic (AVR control) Digital control ACP Terminal board Dimensions and weight: Length: 2400 mm Width: 1000 mm Height: 1685 mm Weight, dry: 1500 kg Oil drip tray Crane eye Engine preheating Can be driven under by forklift

Condition: new, Year of construction: 2023, functionality: fully functional, input frequency: 50 Hz, Make: PRAMAC GDW 65 P FS3A Sound pressure at 7 m dB(A): 62 Sound power LWA dB(A): 91 Continuous power 60.3kVA / 48.2kW Voltage: 230 / 400 Volt Frequency: 50 Hz Diesel engine: Perkins 1104D-44TG3 Exhaust stage: IIIA only approved for stationary operation! Cooling system: Water Cylinders: 4 in series Displacement: 4400 cm³ Intake: Turbo Engine speed: 1500 rpm Engine control: Mechanical Consumption 3/4 load: 11.73 liters Consumption at full load: 15.81 liters Fuel capacity: 300 liters in metal tank Generator: MeccAlte ECP32 2M4 C Type: Brushless Number of poles: 4 Control: Electronic (AVR control) Digital control ACP ComAp IL3 AMF25 3-pole generator switch Terminal strip Dimensions and weight: Length: 2400mm Width: 1040mm Height: 1745mm Weight, dry: 1220kg Stacker can be driven under from two sides Oil drip tray Crane loading eyes Knjdpfsq A U Amsx Andoa Manual battery master switch Engine preheater Manual engine oil suction pump 3-way valve with bayonet quick connector

Condition: new, Title: STOCK CLEARANCE: New Generators & Power Units (1-500 kVA) – Pramac / CGM – Immediately Available Description: Looking for emergency power systems available for instant delivery—no long waiting times? We offer one of the largest stocks of new generators available on-site. Technical Details & Scope: Power Range: 1 kVA to 500 kVA Fuel: Diesel and petrol Categories: Emergency power, continuous duty, site generators, light tower units. Condition: NEW & in original packaging. Thanks to our extensive stock, we can respond promptly to enquiries – ideal for large-scale buyers, resellers, or export to crisis regions (e.g., Ukraine). Your Benefits: No lengthy lead times. On-site inspection of goods possible. Large quantities available for projects. Knodpfx Ajyifn Isndja Interested? Send us your requirements now. We will promptly provide you with an offer for a suitable solution.

Condition: new, Year of construction: 2023, functionality: fully functional, motor manufacturer: FPT, input frequency: 50 Hz, Manufacturer: PRAMAC Sound pressure level at 7m dB(A) : 64 Continuous power: 60.3 kVA / 48.2 kW Voltage: 230 / 400 Volt Frequency: 50 Hz Diesel engine: FPT IVECO F 34 TCA Exhaust stage: STAGE V Cooling system: Water Cylinders: 4 in series Displacement: 3400 cm³ Intake: Turbo/NK Speed: 1500 rpm Starter: 12V Engine control: Electronic Exhaust gas recirculation, particulate filter, catalytic converter, Consumption 3/4 load: 8.32 liters Consumption at full load: 13.99 liters Generator: MeccAlte ECP32-2M4 C Type: Brushless Number of poles: 4 Ksdpfx Anjtq Hccodena Control: Electronic (AVR control) DEEP SEA ACP Digital control DGUV TYPE B Higher-level insulation monitor Sockets with Fi type B 1x 63A 400V /5P 1x 32A 400V /5P 1x 16A 400V /5P 1x Schuko Dimensions and weight: Length: 2,400 mm Width: 1,040 mm Height: 1,745 mm Weight, dry: 1,250 kg Fuel tank: 209 liters Sound insulation hood: RAL 9016 white Main battery switch Oil drip tray Fuel three-way valve WSP water-separating diesel filter Document holder Galvanized base frame with forklift pockets

Year of construction: 2023, condition: new, Continuous power: 20.12 kVA / 16.10 kW Voltage: 230 V / 400 V Frequency: 50 Hz Engine: Perkins 404J-22G Fuel: Diesel Tank capacity: 51 liters Generator type: IP21 protection class, MeccALte Starting mode: electric Generator with AVR control Dimensions and weight: Length (mm):1645 Knjdpomw Ui Rjfx Andja Width (mm):870 Height (mm):1072 Weight, dry: 640 kg

Year of construction: 2000, condition: ready for operation (used), Travel path X/Y/Z: 1670mm/800mm/900mm, Speed: 4000rpm, Tool positions: 16, Tool holder: SK40, Table dimensions X/Y: 2000mm/900mm, Weight: approx. 4500kg, Operating hours: approx. 9680h. According to the error message, the standstill monitoring of the Z-axis is defective. Documentation available. An on-site inspection is possible. Knsdpjymfdajfx Andsa

Condition: ready for operation (used), Year of construction: 1988, A complete beer keg cleaning and filling system Leifeld + Lemke, today IW-Anlagentechnik, is available. Throughput capacity: approx. 120kegs/h, keg/barrel formats: 20l/30l/50l, control system: Siemens S7, control system retrofit: 2008. 1) Keg exterior cleaning machine Schöttiger + Schäfer KHAH 240, max. cleaning capacity: 240kegs/h, operating cleaning capacity: 140kegs/h, drive rollers: 2, transfer rollers infeed/outfeed: 1/1. 2) Keg pre-cleaning machine Leifeld + Lemke KVR 300, year of manufacture: 1988, max. washing capacity: 180kegs/h, operating washing capacity: 120kegs/h, design: stainless steel, process: centering, residual emptying with air purging, mixed water pre-cleaning, waiting and soaking station, caustic cleaning and pre-filling. 3) Keg main cleaning and filling machine Leifeld + Lemke KFR 401, year of manufacture: 1988, filling line capacity: 60kegs/h, design: stainless steel, process: centering, internal cleaning station, 2x sterilization stations, filling process preparation, filling station, waiting station. 4) CIP cleaning station for kegs, max. cleaning capacity: 180kegs/h, cleaning agent tanks: 5, tank volume: 650l, tank contents: caustic 1/caustic 2/acid/hot water/mixed water. Furthermore, the system includes the complete pallet conveyor, keg conveyor and a Kuka robot for depalletizing and palletizing of the kegs. Documentation available. On-site inspection is possible. Knedpjycigkjfx Andoa

Year of construction: 2008, condition: ready for operation (used), Stroke: 100mm, max. electrode distance: 230mm, electrode distance: 20kN, controls: Siemens S7-1500, with documentation, was hardly used. Ksdpfx Anolp N Eysdsna

Condition: refurbished (used), Year of construction: 2015, machine/vehicle number: R-00631, load capacity: 20 kg, arm reach: 3,110 mm, controller manufacturer: R-30iB A-Size, teach pendant manufacturer: A05B-2518-C202#EGN, Refurbished FANUC M-710iC/20L manufactured in 2015.11. The robot comes with an R-30iB A-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC Model: M-710iC/20L Model Number: A05B-1125-B205 Year of Manufacture Robot: 2015.11 Warranty term (months): 12   Payload (kg): 20 Reach (mm): 3110 Repeatability (mm): ± 0.11 Controlled Axes: 6-axis Installation Type: Floor, Upside-down, Wall, Angle Mount Weight (kg): 540   Controller: R-30iB A-Size Year of Manufacture Cabinet: 2015.10 RCC Length (m): 7   Teach Pendant: A05B-2518-C202#EGN Teach Pendant Cable Length (m): 10 Kodpfx Aezrz Dfondsna

Condition: new, Year of construction: 2026, functionality: fully functional, MP160 Pressure Parts Washer – Precision Cleaning with a Closed-Loop System The MP160 pressure parts washer is a professional machine designed for intensive cleaning of industrial, workshop, and automotive components. The enclosed working cabinet, operating pressure of 5–8 bar, and the ability to heat the detergent to 70°C ensure effective removal of oils, grease, carbon deposits, process residues, and other stubborn contaminants. The closed-loop system allows the cleaning solution to be reused, reducing detergent consumption and helping maintain a cleaner, more organized workplace. The MP160 is ideal for cleaning components with complex shapes, narrow channels, recesses, and other hard-to-reach surfaces. Key Advantages of the MP160 Parts Washer 5–8 bar operating pressure – enables effective removal of stubborn contaminants from components with complex geometries. Detergent heating up to 70°C – improves the effectiveness of the cleaning solution and helps reduce cleaning time. Closed-loop cleaning solution system – reduces detergent consumption and the amount of waste generated during operation. Dual-function cleaning gun – allows the application of cleaning solution with compressed air or blow-off cleaning using compressed air alone. Component drying function – after cleaning, components can be blown dry using compressed air. Operating pressure gauge – allows continuous monitoring of operating pressure. Clear control panel – provides independent control of the power supply and heating system. Steel cabinet construction – designed for regular use in workshops and industrial facilities. Adjustable leveling feet – ensure stable positioning and proper leveling of the workstation. Parts Cleaning Concentrate Included The MP160 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. For the best cleaning results, it is recommended to use an aqueous solution at a temperature of between 40 and 70°C. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 Effective Cleaning of Hard-to-Reach Surfaces The pressure spray system allows the cleaning solution to be directed precisely onto contaminated areas. This makes the MP160 suitable for cleaning gaps, recesses, openings, channels, and components with irregular shapes. After cleaning, the operator can switch the gun to compressed-air-only mode. This makes it easier to remove residual cleaning solution from the component's surface and prepare parts for further servicing, inspection, assembly, or refurbishment. Standard Equipment Dual-function gun for spraying cleaning solution and blow-off cleaning with compressed air Cleaning solution heating system Control panel Operating pressure gauge Adjustable stabilizing feet 2 liters of concentrate for workshop parts washers Technical Specifications Specification Value Cabinet capacity 160 l Knjdpfsztwkdjx Andea Maximum detergent temperature 70°C Cleaning solution tank capacity 8–14 l Operating pressure 5–8 bar Overall dimensions 770 × 600 × 1,330 mm Weight 47 kg

Condition: new, Year of construction: 2026, functionality: fully functional, 140L Parts Washer The 140L parts washer is a professional workshop cleaning machine designed for the effective removal of oil, grease, deposits, and other stubborn contaminants from mechanical parts and components. The closed-loop cleaning solution system allows for efficient use of the cleaning fluid while reducing consumption. The large tank capacity, robust construction, and convenient working area make the 140L workshop parts washer an excellent choice for mechanical workshops, automotive service centers, manufacturing facilities, and maintenance departments. Key Advantages of the 140L Workshop Parts Washer 140-liter tank capacity – provides ample space for cleaning larger parts and components. Up to 90 liters of cleaning solution – the large working fluid capacity allows for longer operation without frequent refilling. Efficient 2.7–3.6 l/min pump – enables precise application of the cleaning solution to the components being cleaned. Closed-loop system – allows the cleaning solution to be reused and helps reduce consumption. Automatic lid lock – improves operator safety and convenience. Stable four-leg construction – provides excellent stability during operation. Practical work surface – provides a convenient place to put tools, parts, and accessories. Knodpfx Aneztwh Aedja Parts Cleaning Concentrate Included The MP140 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 Parts Washer Construction and Operating Principle The 140L parts washer is equipped with a flexible hose fitted with a spray nozzle. The cleaning solution is drawn from the tank and delivered through the pump to the hose, allowing the operator to precisely direct the stream onto contaminated surfaces. For proper operation, the pump inlet must be completely submerged in the cleaning solution. This ensures an adequate flow of cleaning fluid during operation. The tank lid opens conveniently and automatically locks in the raised position, improving operator safety. The entire unit is mounted on a robust steel frame with four legs, providing stability even during intensive use. With dimensions of 1,130 × 540 × 885 mm, the parts washer can be installed in most workshop environments while still providing a large and practical working area. Standard Equipment Working tank with automatically locking lid Pump with flexible hose and spray nozzle Steel frame with four legs Work surface beneath the tank Assembly and operating instructions 2 liters of concentrate for workshop parts washers Technical Specifications Specification Value Tank capacity 140 l Maximum cleaning solution capacity 90 l Pump flow rate 2.7–3.6 l/min Power supply 230 V Overall dimensions 1,130 × 540 × 885 mm Working tray dimensions 800 × 500 mm Weight 43 kg

Condition: new, Year of construction: 2026, functionality: fully functional, AURORA MP150 Pressure Parts Washer The AURORA MP150 pressure parts washer is a compact workshop cleaning machine designed for cleaning mechanical parts, tools, and components. The enclosed working cabinet helps reduce liquid splashing, while the operating pressure of 5–8 bar makes it easier to remove oil, grease, carbon deposits, and other stubborn contaminants. The parts washer uses a closed-loop cleaning solution system, allowing the cleaning fluid to be reused during ongoing work. The dual-function pneumatic gun enables both cleaning with a mixture of cleaning solution and compressed air and subsequent blow-off and drying of cleaned components. AURORA MP150 Workshop Parts Washer – Key Advantages 5–8 bar operating pressure – effectively removes oil, grease, carbon deposits, and other contaminants, including from hard-to-reach areas. Dual-function pneumatic gun – enables cleaning with cleaning solution and compressed air, as well as blow-off cleaning using compressed air alone. Closed-loop cleaning solution system – helps reduce cleaning agent consumption during regular operation. Working cabinet lighting – provides better visibility of cleaned surfaces, openings, and hard-to-reach areas. Integrated work gloves – make it easier to handle components without opening the cabinet. Lid support cylinders – make opening and closing the working chamber easier. Cabinet ventilation – supports air circulation while the machine is operating. Compact benchtop design – the parts washer can be placed on a stable and sufficiently strong table or workbench. Parts Cleaning Concentrate Included The MP150 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% Kedpfsztwg Sox Andsna High-pressure cleaning: 2–5% Concentrate pH value: 12.8 Parts Washer with Dual-Function Pneumatic Gun The AURORA MP150 is equipped with a pneumatic gun featuring two operating modes, allowing a single device to perform both thorough cleaning and blow-off drying of components. In cleaning mode, a mixture of cleaning solution and compressed air is discharged from the nozzle. The pressurized stream helps remove contaminants from openings, channels, recesses, and surfaces with complex shapes. After cleaning, the gun can be switched to blow-off mode. Compressed air removes residual cleaning solution from surfaces and hard-to-reach areas, making it easier to prepare components for further use, inspection, repair, or assembly. The AURORA MP150 Parts Washer Comes as Standard With Dual-function pneumatic gun Integrated work gloves Interior cabinet lighting Ventilation system Lid support cylinders Compressed air supply adjustment 2 liters of concentrate for workshop parts washers Technical Specifications Specification Value Cabinet capacity 150 l Cleaning solution tank capacity 8–14 l Operating pressure 5–8 bar Dimensions 770 × 610 × 700 mm Weight 29 kg Gun Dual-function pneumatic Cabinet lighting Yes Ventilation Yes

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK MP180 Pressure Parts Washer The CORMAK MP180 pressure parts washer is a professional industrial cleaning machine designed for the effective removal of heavy dirt from mechanical, metal, and industrial components. The combination of high pressure, heated cleaning solution, and a stainless steel construction ensures excellent cleaning performance, durability, and convenience in everyday operation. The closed-loop cleaning solution system allows for economical use of the cleaning agent, while the ability to heat the liquid to a temperature of up to 70°C increases the effectiveness of removing stubborn contaminants such as oils, grease, fats, carbon deposits, and other residues. The MP180 parts washer has been designed for professional workshops, service centers, and industrial facilities where precision, durability, and cleaning efficiency are essential. Key Advantages of the MP180 Parts Washer Closed-loop cleaning system with heated cleaning solution – effective removal of stubborn contaminants thanks to an operating temperature of up to 70°C. High operating pressure of up to 8 bar – enables thorough cleaning of hard-to-reach surfaces and heavily soiled components. Stainless steel construction – provides excellent resistance to corrosion, moisture, and intensive use. Dual-function cleaning gun – allows operation using compressed air alone or a mixture of air and cleaning solution, as well as drying components after washing. Adjustable leveling feet – ensure stable positioning of the machine even on uneven surfaces. Parts Cleaning Concentrate Included The MP180 parts washer comes with 2 liters of concentrate for workshop parts washers. When preparing a 10% solution, the concentrate is sufficient to produce up to 20 liters of ready-to-use cleaning solution. For the best cleaning results, it is recommended to use an aqueous solution at a temperature of between 40 and 70°C. The appropriate concentration should be selected according to the type of surface, the nature of the contamination, and the cleaning method used. Recommended Solution Concentration Immersion cleaning: 5–10% Low-pressure cleaning: 2–10% High-pressure cleaning: 2–5% Concentrate pH value: 12.8 MP180 Construction and Technology The MP180 parts washer is equipped with a spacious working chamber and a cleaning solution heating system. The elevated liquid temperature increases the effectiveness of the cleaning process and helps remove stubborn contaminants more quickly. The robust stainless steel construction provides excellent resistance to moisture, dirt, and demanding working conditions. This makes the machine suitable for regular use in workshops, service centers, and industrial facilities. Standard Equipment Dual-function gun – air / liquid + air Cleaning solution heating system 180-liter working chamber Stainless steel construction Adjustable leveling feet Kedpfx Asztwa Sendena 2 liters of concentrate for workshop parts washers Technical Specifications Parts washer capacity 180 l Voltage 230 V Frequency 50 Hz Weight 56 kg Height with legs 1,450 mm Height without legs 920 mm Internal width 740 mm Internal height to open lid 410 mm Internal depth 500 mm Loading height 360 mm Loading width 700 mm

Condition: used, Year of construction: 2023, load capacity: 2,000 kg, lifting height: 4,240 mm, fork length: 1,000 mm, total length: 3,080 mm, - Bedienung: Sitz - Lastschwerpunkt: 500 mm - Lastabstand 388 mm - Achslast mit Last vorn/hinten: 4860/623 kg - Achslast ohne Last vorn/hinten 1689/1794kg Ksdpfxjzrp Hnj Andsna - Spurweite vorn/hinten 942/172 mm - Neigung Hubgerüst/Gabelträger vor/zurück α/β 5/6 ° - Höhe über Schutzdach (niedrige Variante) 2035 (1949) mm - Sitzhöhe/Standhöhe 965 mm - Kupplunghöhe 473 mm - Gabelträger DIN 15173, Klasse/Form A, B: ISO II A - Arbeitsgangbreite bei Palette 1000 x 1200 quer 3390 mm - Arbeitsgangbreite bei Palette 800 x 1200 längs 3516 mm - Wenderadius 1678 mm - Fahrgeschwindigkeit (Blue-Q/Normal/Sprint) mit Last 16/16/20 km/h - Fahrgeschwindigkeit (Blue-Q/Normal/Sprint) ohne Last km/h 16/16/20 - Hubgeschwindigkeit mit Last 0,45 m/s - Hubgeschwindigkeit ohne Last m/s 0,63 - Senkgeschwindigkeit mit/ohne Last 0,48/0,41 m/s - Zugkraft mit/ohne Last N 4800/5000 - Max. Zugkraft mit/ohne Last N 11900/8700 - Steigfähigkeit mit/ohne Last 15/18,1 % - Max. Steigfähigkeit mit/ohne Last 23/27 % Beschleunigungszeit/15 m (Blue-Q/Normal/Sprint) mit Last 5,8/5,5/5,3 s - Beschleunigungszeit/15 m (Blue-Q/Normal/Sprint) ohne Last 5,4/5,1/4,8 s - Betriebsbremse Elektrisch/mechanisch - Fahrmotor, Leistung S2 60 min kW 2 x 6,5 - Hubmotor, Leistung bei S3 15 % kW 11 - Batterie nach DIN 43531/35/36 A, B, C, nein DIN 43531 - Batteriespannung V 48 - Energieverbrauch nach EN 16796 kWh/h 4,6 - Umschlagleistung t/h 155 - Energieverbrauch bei Umschlagleistung kWh/h 6,2 - Arbeitsdruck für Anbaugeräte bar 240 - Ölmenge für Anbaugeräte l/min 26,5 - Schallpegel, Fahrerohr dB(A)

Condition: new, Year of construction: 2026, color: grey, loading space volume: 11 m³, loading space width: 2,380 mm, loading space length: 6,000 mm, loading space height: 750 mm, Roll-off container, 11 cubic meters, with a foldable and traversable swing gate Dimensions L/W/H in mm: 6000/2380/750 Swing gate can be folded down and driven over Reinforced floor with U-profile as a support profile 2 tie-down points, 3.15 tons, on the front wall 10 tie-down points on the side wall Front wall trapezoidal up to the hook height Locking dimension according to DIN 3540 mm Kodpfx Ajzru Tasndsna End profile on the sides in the form of a thick-walled tube Color RAL 7023 concrete gray

Condition: used, functionality: fully functional, Year of construction: 2021, load capacity: 2,000 kg, lifting height: 4,750 mm, free lift: 1,200 mm, fuel type: electric, mast type: triplex, construction height: 2,110 mm, fork carriage width: 920 mm, fork length: 1,200 mm, empty load weight: 3,984 kg, total length: 2,045 mm, drive type: Elektro, construction width: 1,125 mm, 3-wheel electric forklift Load centre: 500 mm Fork width: 100 mm Fork thickness: 40 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: New Front tyre type: Superelastic Front tyre size: 200/50-10 Rear tyre type: Superelastic Rear tyre size: 140/55-9 Battery voltage: 48V Battery capacity: 750Ah Battery manufacturer: Hawker Battery year: 2021 Knedozrcwaepfx Andoa Sideshift, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, load guard, full cab,

Condition: excellent (used), Year of construction: 2019, operating hours: 13,865 h, lifting height: 6,880 mm, free lift: 2,260 mm, fuel type: electric, mast type: triplex, fork length: 1,200 mm, fork width: 120 mm, total height: 2,860 mm, color: other, GVW: 3.910 kg Kedozna N Sopfx Andona Lifting capacity: 2.000 kg BATTERY 48V 6PzS 750Ah 2026!!! 380V high-frequency charger, Cabin, Sideshift Fork Positioner, Non-marking SE tires 85%, NEW Forks 1200 x 120 mm, Work lights,

Condition: used, Year of construction: 2021, Canon CX-1 system, including computer, packed in its original manufacturer’s boxes. Kjdpezmxqrsfx Andena Serial number: 210141 – Year of purchase: 2022 The system was purchased for a brief clinical study and has seen very limited use; it is in excellent condition.

Condition: excellent (used), Year of construction: 2019, operating hours: 6,195 h, lifting height: 5,680 mm, free lift: 1,800 mm, fuel type: electric, mast type: triplex, fork length: 1,200 mm, fork width: 100 mm, total height: 2,480 mm, color: other, GVW: 3.830 kg Lifting capacity: 2.000 kg Knjdpfxjzldyps Andja LOW HOURS! BATTERY 48V 6PzS 750Ah 2025, 380V high-frequency charger, Half-cabin, Integrated Sideshift, NEW non-marking SE-tires, NEW Forks 1200 x 100 mm, Joysticks and 1 pedal, Work lamps,

Condition: new, 🧰 Product Features • Condition: new • Material: steel sheet • Color: traffic red RAL3000, zinc yellow RAL1018 • Volume: 20 l • Width: 165 mm • Length: 345 mm • Height: 470 mm • Net weight: 4.3 kg • TÜV approved: yes • Fuel types: suitable for all • Incl. lifting closure and securing device • Fuel resistant: inside and outside • Spout: not included 💰 Price: €15.00 net, excl. VAT per piece • Quantity discount: available upon request • Shipping costs: available upon request throughout Europe • Delivery time: immediately available • Inspection and collection: possible at any time by appointment Constantly over 5000 linear meters of pallet racking from numerous manufacturers in stock (Changes and errors in technical data, specifications and prices, as well as prior sale, are reserved! See our terms and conditions, all prices excl. VAT, ex warehouse.) Knsdpfx Anjuw Swzsdsa Lenox Trading – Top warehouse technology & used & new heavy-duty racking Description: Are you looking for high-quality warehouse racking to buy? With approximately 100 employees, Lenox Trading is one of the largest dealers of new and used warehouse technology in the entire DACH region (Austria, Germany, Switzerland). ⚡ IMMEDIATELY AVAILABLE: • Over 10,000 linear meters of racking immediately available • 20,000 m² of storage platforms & steel construction platforms immediately available • 30–50 semi-trailer loads of goods turnover weekly for maximum selection 📦 OUR RANGE (BUY CHEAP ONLINE): Whether you want to buy pallet racking, heavy-duty racking, high-bay racking, shelf racking, tire racking or racking for IBC containers – we deliver and install throughout Europe with our OWN team! Including CAD planning, transport, dismantling and assembly. 🏭 TOP BRANDS USED & FROM INSOLVENCY / BANKRUPTCY LIQUIDATION: • SSI Schäfer (Schäfer warehouse technology, R 3000, PR 600, PR 300) • Jungheinrich (Type MPB, Type E, heavy-duty racking Jungheinrich) • Wezsuisse Euronorm, Bito RK 4209, Schäfer EK 113, Schäfer RK 521, Schäfer LF 533, Familog SP 6428, R-KLT 4315, RL-KLT 6147, Schäfer KLT 3214, UTZ SILAFIX 3Z, EF 3120, EF 6420 • Cantilever racking (Elvedi cantilever racking, Schäfer, Ohra) • Stow, Meta, Bito, Galler, Nedcon, Voest, SLP, Palflex, Ramada, Bauer, Ohrner 🔨 OUR SECOND BUSINESS AREA: ONLINE AUCTIONS & LIQUIDATION For dismantling and clearance orders, we offer a complete all-round package: 1. Lump-sum purchase: Purchase of merchandise, equipment & entire stock including complete clearance. 2. Commission-based auction: Conducting auctions on behalf of clients. Our full service provided by our own employees: cataloging, office preparation, inspection, goods issue, logistics, dismantling and complete handover. Whether you became aware of us through heavy-duty racking or are looking for galvanized heavy-duty racking / heavy-duty racking system, we guarantee the best conditions. Contact us for a non-binding offer!

Condition: excellent (used), Model: M-710iC/20L Serial number: R17103731 Kodewvgfropfx Andena Year of production: 2017 Power supply: 380–480 V AC, 50/60 Hz, 7.5 kVA Weight: 540 kg

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Fanuc M710iC/20L robot, R30iA complete (R12600463) Year of manufacture: 06/2012 Controller: R30iA Number of axes: 6 max. Payload: 20 kg max. Working range: approx. 3110 mm Profibus Knodjzl Afqepfx Andea Serial number: R12600463 Scope of delivery: Robot, controller, cables, teach pendant, operating manual, wiring diagrams Used item – normal signs of wear and tear. Further details, article numbers and images available upon request. Two weeks commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the value-added tax shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight and desired delivery conditions. Shipping costs to foreign countries upon request – please specify country, city and postal code. Freight costs upon request – please specify the delivery address.

Condition: used, machine/vehicle number: 008495, X axis working area: 3050 mm Y axis working area: 1400 mm Knjdpsy Edqqefx Andea Working Table: Pod and Rail Main Electrospindle power: 11 KW Number of controlled axes: 4 axes Maximum edge height: 45 mm Total number of drilling spindles: 21 Total number of tool changer positions: 12

Year of construction: 2011, condition: used, functionality: unexamined, US welding system with UPS 20L - Ultrasonic generator Martin Walter MW 2000 WMI - The previously installed printer is missing - One or two air hoses are leaking Knodjzlnb Rjpfx Andja - A test camera is missing - Shipping is possible for an additional charge.

Condition: used, Year of construction: 2023, load capacity: 2,000 kg, lifting height: 4,830 mm, total length: 3,350 mm, - Bedienung: Sitz - Lastschwerpunkt: 500 mm - Lastabstand 388 mm - Achslast mit Last vorn/hinten: 4860/623 kg - Achslast ohne Last vorn/hinten 1689/1794kg - Spurweite vorn/hinten 942/172 mm - Neigung Hubgerüst/Gabelträger vor/zurück α/β 5/6 ° - Höhe über Schutzdach (niedrige Variante) 2035 (1949) mm - Sitzhöhe/Standhöhe 965 mm - Kupplunghöhe 473 mm - Gabelträger DIN 15173, Klasse/Form A, B: ISO II A - Arbeitsgangbreite bei Palette 1000 x 1200 quer 3390 mm - Arbeitsgangbreite bei Palette 800 x 1200 längs 3516 mm - Wenderadius 1678 mm - Fahrgeschwindigkeit (Blue-Q/Normal/Sprint) mit Last 16/16/20 km/h - Fahrgeschwindigkeit (Blue-Q/Normal/Sprint) ohne Last km/h 16/16/20 - Hubgeschwindigkeit mit Last 0,45 m/s - Hubgeschwindigkeit ohne Last m/s 0,63 - Senkgeschwindigkeit mit/ohne Last 0,48/0,41 m/s - Zugkraft mit/ohne Last N 4800/5000 - Max. Zugkraft mit/ohne Last N 11900/8700 - Steigfähigkeit mit/ohne Last 15/18,1 % - Max. Steigfähigkeit mit/ohne Last 23/27 % - Beschleunigungszeit/15 m (Blue-Q/Normal/Sprint) mit Last 5,8/5,5/5,3 s Kodpfx Ajzlk Tcjndona - Beschleunigungszeit/15 m (Blue-Q/Normal/Sprint) ohne Last 5,4/5,1/4,8 s - Betriebsbremse Elektrisch/mechanisch - Fahrmotor, Leistung S2 60 min kW 2 x 6,5 - Hubmotor, Leistung bei S3 15 % kW 11 - Batterie nach DIN 43531/35/36 A, B, C, nein DIN 43531 - Batteriespannung V 48 - Energieverbrauch nach EN 16796 kWh/h 4,6 - Umschlagleistung t/h 155 - Energieverbrauch bei Umschlagleistung kWh/h 6,2 - Arbeitsdruck für Anbaugeräte bar 240 - Ölmenge für Anbaugeräte l/min 26,5 - Schallpegel, Fahrerohr dB(A)