Used Pressure Gauge for sale (16,251)

Condition: new, Year of construction: 2025, Our SAPI "Mammut" pressure blasting unit with a 200-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: Tjdpfewc Rk Esx Ahmec SAPI pressure blasting unit "Mammut 200 L" 1 1/4" pressure regulator, permanently mounted 1 1/4" water separator, permanently mounted SAPI safety shut-off Technical specifications of the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1 1/4" fixed piping inside and outside Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity: 200 l Total height: 1,420 mm Vessel diameter: 600 mm Total diameter: 1,000 mm Weight: approx. 140 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fastest start-up and shutdown times while maintaining compliance the regulations of the professional associations (VBG 48) The pressure setting can be precisely adjusted before blasting – continuously adjustable from 0.1 to 12.0 bar Lower abrasive consumption, as the pressure vessel remains permanently pressurized and there is no unnecessary run-on time Upon restart, full blasting pressure is immediately available at the nozzle – no pressure build-up necessary → lower consumption & less wear on the hose No condensate formation in the vessel, as it remains constantly pressurized → no venting or venting with every start/stop Optimal abrasive dosing with a hardened fine dosing valve Less compressed air required → noticeably lower diesel consumption One-person operation, as the pressure can be displayed and adjusted directly on the pressure gauge – even without starting No failure-prone components such as control valves, diaphragms, or seals → easy to maintain and reliable Only the blasting hose in the safety shut-off device needs to be checked and replaced if necessary

Condition: used, Year of construction: 2011, operating hours: 3,690 h, functionality: fully functional, machine/vehicle number: W09D500THBAD43025, operating pressure: 500 bar, total length: 3,695 mm, high-pressure hose length: 50,000 mm, total height: 2,026 mm, total width: 2,050 mm, pressure: 500 bar, empty load weight: 1,695 kg, input voltage: 12 V, fuel: diesel, heating capacity: 115 kW (156.36 HP), overall weight: 2,900 kg, water tank capacity: 1,000 l, fuel tank capacity: 50 l, power: 32.4 kW (44.05 HP), temperature: 150 °C, DGUV certified until: 11/2028, Dynajet 500TH 28 l/min at cold water Maximum pressure: 500 bar 3695 operating hours Tsdpsz Eg Dhofx Ahmec Recently serviced Imported to Sweden in 2026 WITH HOT WATER UP TO 150°C!!!

Condition: new, Our SAPI "Mammut" pressure blasting unit with a 60-liter tank capacity is suitable for all common blasting media. The blasting pressure can be continuously adjusted from 0.1 to 12 bar using the permanently installed pressure regulator. A water separator is also permanently installed on the blasting unit; this separates moisture from the compressed air and prevents the blasting media from clumping due to excessive moisture. Our safety shut-off device is included for safe operation of the sandblaster. This starts and stops the blasting process by operating the hand lever mounted on the blasting hose. Included in delivery: SAPI pressure blasting unit "Mammut 60 L" 1" pressure regulator, permanently mounted 1" water separator, permanently mounted SAPI safety shut-off Technical specifications for the pressure blasting unit: Precisely adjustable from 0.1 - 12 bar TÜV-tested with certificate 1" fixed piping, internal and external Rubber-coated metal cone with rubber seal Generous hand hole Rubber-coated metal cone with rubber seal Tsdpfxewc Afho Ahmjc Large hand hole Rubber-wheeled chassis Abrasive dosing valve (suitable for all common blasting media) Capacity 60 l Total height 1,130 mm Bowl diameter 360 mm Total diameter 700 mm Weight approx. 60 kg ADVANTAGES OF THE SAPI PRESSURE BLASTING UNIT with safety shut-off Fast shut-off and start-up times, while complying with the regulations of the professional associations (VBG 48) Pressure setting Can be precisely adjusted before the actual blasting process, continuously adjustable from 0.1 to 12.0 bar. Reduced abrasive consumption, as the pressure vessel remains permanently pressurized, thus eliminating unnecessary abrasive run-on. Upon restart, the full blasting pressure is immediately available at the nozzle and does not need to be slowly built up. This significantly reduces abrasive consumption and significantly reduces wear on the blasting hose. No moisture (condensate) builds up in the vessel, as the vessel remains constantly pressurized and is not vented and vented with every start and stop. This process also offers other advantages, such as: Optimal abrasive dosing with a hardened fine dosing valve Lower compressed air consumption, thus significantly reducing fuel consumption (diesel) One-person operation, as the blasting pressure is constantly displayed by the vessel pressure and can be easily adjusted on the pressure gauge without prior start-up. No failure-prone components such as control valves, diaphragms, or seals, making it easy to maintain and reliable. Only the blasting hose needs to be checked in the safety shutoff and replaced if necessary.

Condition: used, Year of construction: 2006, operating hours: 4,803 h, functionality: fully functional, machine/vehicle number: WPUD500H062000449, operating pressure: 500 bar, total length: 3,650 mm, high-pressure hose length: 50,000 mm, total width: 2,080 mm, pressure: 500 bar, type of input current: DC, empty load weight: 1,620 kg, input voltage: 12 V, fuel: diesel, overall weight: 2,900 kg, water tank capacity: 1,000 l, fuel tank capacity: 50 l, power: 32 kW (43.51 HP), DGUV certified until: 09/2026, Dynajet 500TH 30 L/min 500 bar 4800 operating hours Regularly maintained, recently serviced, not operated in winter (only April–October) Tsdpez Egmcofx Ahmoc New engine installed in September 2026, invoice available Imported to Sweden from Germany in 2021.

Condition: used, Year of construction: 2011, operating hours: 8,176 h, functionality: fully functional, machine/vehicle number: WPUD500H0B2000955, operating pressure: 500 bar, total length: 3,650 mm, high-pressure hose length: 50,000 mm, total width: 2,070 mm, pressure: 500 bar, empty load weight: 1,630 kg, input voltage: 12 V, fuel: diesel, overall weight: 2,900 kg, water tank capacity: 1,000 l, fuel tank capacity: 50 l, power: 34.5 kW (46.91 HP), DGUV certified until: 10/2026, Dynajet 500TH 30 l/min Maximum pressure: 500 bar 8176 operating hours Regularly maintained, recently serviced, not in operation during winter (only April–October) Owned by the same operator since new For cold water only; can be retrofitted for heating water. Tjdpfx Aoz Egw Uohmoc

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar. Tedpfofzrapjx Ahmsc

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 68370, SMB Technik Multima 9R/9L/3K automatic beer bottling monobloc for rinsing, counter-pressure filling and crown capping of glass bottles. The machine was previously in operation at a Norwegian brewery. Following the sale and removal of the labelling machine, an electric motor is required to drive the bottling line. The electric motor is not included in the sale. The SMB rinsing, filling and capping monobloc was operational prior to this change and can be inspected at its current location in Norway. CONFIGURATION * 9-station bottle rinser * 9-head counter-pressure filler * 3-head crown capper * Automatic bottle transfer through rinsing, filling and capping sections * Conveyor sections * CO₂ counter-pressure / isobaric filling * Long-tube bottom-up filling * Separate bottle pressurising and return-gas system * Automatic filler bowl level and pressure control * High-pressure injection / jetter before capping * Electrically interlocked safety doors * Automatic bottle presence monitoring FILLING PROCESS The Multima is designed for bottling beer in glass bottles. Bottles are rinsed before being transferred to the filling section. Before filling, the bottles are pressurised, normally using CO₂. Beer is then filled from the bottom through long filling tubes. The system uses separate channels for bottle pressurising gas and return gas and is designed to minimise turbulence, foaming and oxygen uptake. After filling, the bottles pass a high-pressure injection device (jetter), which produces controlled foaming to help displace air from the bottle neck immediately before crown capping. TECHNICAL DATA Manufacturer: SMB Technik GmbH, Mannheim, Germany Model: Multima 9R/9L/3K Year: 2000 Serial number: 68370 Electrical supply: 400 V / 50 Hz Current: 12 A Container: Glass bottles Product: Beer Closure: Crown caps Filling principle: Counter-pressure / isobaric Rinser: 9 stations Filler: 9 filling valves Capper: 3 heads A 400 V to 230 V converter is included in the sale. DOCUMENTATION Extensive original SMB technical documentation is available, including operating instructions, setup and adjustment procedures, bottle changeover information, cleaning and sanitising procedures, maintenance and troubleshooting information, as well as filling-valve technical documentation. IMPORTANT Todpsz Dhrqefx Ahmjc The labelling machine has been sold separately and is NOT included. An electric motor is required to operate the bottling line and is NOT included. Tanks and other brewery equipment visible in the photographs are not included unless specifically agreed. The machine is located in Norway and can be inspected by appointment. Dismantling, loading and transport can be discussed separately.

Condition: used, Year of construction: 2015, operating hours: 5,201 h, functionality: fully functional, machine/vehicle number: W09HKF1011SHB8027, operating pressure: 550 bar, total length: 3,950 mm, high-pressure hose length: 50 mm, total height: 1,880 mm, total width: 1,870 mm, empty load weight: 1,200 kg, fuel: diesel, heating capacity: 0 kW (0.00 HP), overall weight: 1,800 kg, water tank capacity: 500 l, noise level: 93 dB, DGUV certified until: 03/2027, Oertzen PT500 Tjdpfx Ahsz Ega Njmoc 30 l/min Maximum pressure: 500 bar 5200 operating hours Regularly maintained, recently serviced, not operated in winter (only April–October) Owned by the same operator since new For cold water only; heating element has been removed.

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation Tsdpjzgq Szsfx Ahmjc

Condition: good (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 1873778, pressure: 4,000 bar, overall weight: 1,055 kg, Manufacturer: Uhde High Pressure Technologies GmbH Type: HPS 4022 Tsdszz Achepfx Ahmec Year of manufacture: 2015 Motor power: 22 kW Stroke length: 182 mm Plunger diameter: 19 mm Maximum flow rate: 2.3 l/min at 4000 bar

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, The filter body is original PENTAS, Czech/EU production. The automation system has been newly built and has never been used. Main data: - Manufacturer: PENTAS Horice a.s. (CZ-EU) - Model / type: AO-9N - Type: vertical pressure leaf filter - Filtration area: approx. 10 m² - Filter body: stainless steel - Vessel volume: 830 l - Max. working pressure: 0.5 MPa - Max. working temperature: 40 °C - Weight: approx. 760 kg - Year of filter vessel: 1999 - Automation: new and unused - Control: PLC control cabinet - Valves: pneumatic valves - Includes piping, fittings, sensors and automation system - Location: Slovakia, EU Suitable for filtration of vegetable oil, rapeseed oil, sunflower oil, soybean oil, technical oils, biodiesel and oleochemical applications. The filter vessel is used, but the automation system is completely new and unused. The unit is designed for automatic operation with pneumatic valves, sensors and PLC control. Fully functional according to seller information. Sold as shown in the photos. Loading possible. Worldwide shipping on request. 7. Nemački dodatak Zu verkaufen: PENTAS AO-9N Edelstahl-Druckblattfilter mit ca. 10 m² Filterfläche. Der Filterbehälter ist original PENTAS, tschechische/EU-Produktion. Die Automatisierung wurde neu aufgebaut und ist unbenutzt. Technische Daten: - Hersteller: PENTAS Horice a.s. (CZ-EU) - Modell / Typ: AO-9N - Vertikaler Druckblattfilter - Filterfläche: ca. 10 m² - Edelstahl-Filtergehäuse Todpfx Aotxc Hpjhmoc - Behältervolumen: 830 l - Max. Betriebsdruck: 0,5 MPa - Max. Betriebstemperatur: 40 °C - Gewicht: ca. 760 kg - Baujahr Filterbehälter: 1999 - Neue, unbenutzte Automatisierung - PLC-Schaltschrank - Pneumatische Ventile - Rohrleitungen, Armaturen, Sensoren und Steuerung inklusive - Standort: Slowakei, EU Geeignet für Pflanzenöl, Rapsöl, Sonnenblumenöl, Sojaöl, technische Öle, Biodiesel und oleochemische Anwendungen. Der Filterbehälter ist gebraucht, die Automatisierung ist neu und unbenutzt. Voll funktionsfähig laut Verkäuferangabe. Verkauf wie auf den Fotos. Verladung möglich. Versand auf Anfrage.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 1,909 h, functionality: fully functional, machine/vehicle number: 08241380, fuel: diesel, DynaJet 500 High-Pressure Cleaner We are offering for sale a professional DynaJet 500 high-pressure washer with a diesel engine and water heating system. Technical Specifications: Tsdpfx Ahjzuaftsmjc • Type: DynaJet 500 • Model: DY Boiler • Fuel: diesel • Power supply: 12 V • Maximum operating pressure: 500 bar • Maximum system pressure: 600 bar • Maximum flow rate: 28 l/min • Maximum temperature at high flow rate: 80 °C at 28 l/min • Maximum temperature at low flow rate: 150 °C at 8 l/min • Power: 115 kW • Year of manufacture: 2009 Machine application: This professional high-pressure cleaner is particularly suitable for: • cleaning industrial equipment and machinery, • removing dirt, grease, and deposits, • cleaning construction and agricultural equipment, • cleaning production and operational areas, • demanding industrial and maintenance cleaning. Machine condition: • The machine is complete, • functional and operational, • diesel system with heating, • high-pressure design up to 500 bar, • the machine is equipped with a chassis for easy handling, • sold as a fully functional unit. The machine is suitable for companies seeking high-performance professional equipment for high-pressure cleaning in industry, construction, agriculture, or service operations.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. Tsdoflpmqspfx Ahmsc The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: like new (used), Year of construction: 2026, operating hours: 40 h, functionality: fully functional, pressure: 2,500 bar, year of last overhaul: 2026, We are selling our IBAK MicroGator with a UHP high-pressure water cleaning system for main pipelines DN 200–DN 800. The robot was only used for one project and has not been used since. * Only 4 months old Tjdpfx Ahoz Aupiomoc * Used for only 5 working days * No signs of wear – like new * Equipped for Ultra High Pressure (600–2500 bar), compatible with Falch and Hammelmann * Original price: €66,000 * Our price: €50,000 (negotiable) The robot is currently located in the Czech Republic. However, after prior arrangement, it can also be made available in the Cham area in Bavaria. Filip Khol rohrsanierung1a.de

Condition: used, Year of construction: 2020, operating hours: 555 h, functionality: fully functional, machine/vehicle number: 62006148, operating pressure: 1,000 bar, total length: 1,160 mm, high-pressure hose length: 1,000 mm, total height: 1,300 mm, total width: 800 mm, pressure: 1,000 bar, input voltage: 400 V, fuel: electricity, overall weight: 560 kg, water tank capacity: 20 l, power: 30 kW (40.79 HP), input current: 63 A, noise level: 104 dB, pressure (max.): 500 bar, input frequency: 50 Hz, Equipment: chassis, crane, Used DYNAJET 1000me 400V/50Hz/63A – 1000 Bar High-Pressure Water Jetting System – Only 555 Operating Hours This well-maintained DYNAJET 1000me high-pressure water jetting unit is available for immediate sale. With only 555 operating hours, the machine remains in excellent condition and is ready for demanding industrial cleaning and surface preparation applications. Delivering up to 1000 bar (14,500 PSI) and a flow rate of 17 l/min, the DYNAJET 1000me is designed for professional users who require maximum pressure performance combined with reliable day-to-day operation. The robust four-wheel trolley design ensures easy transportation and flexibility on site, while the industrial-grade construction provides outstanding durability even in harsh working environments. The machine is equipped with a powerful 30 kW electric motor, industrial crankshaft pump, stainless-steel water filtration system, operating-hours meter, automatic motor protection, and DYNAJET's innovative dry-stop pistol technology for improved operator safety and ease of use. Included with the machine: *1 x 1000 bar high-pressure gun *Nozzle holder *Rotating nozzle *High-pressure nozzle *10 m high-pressure hose *Original DYNAJET machine *Only 555 operating hours The DYNAJET 1000me is particularly suitable for: Industrial cleaning Surface preparation Coating and paint removal Concrete renovation work Ship and offshore maintenance Tank and container cleaning Heavy-duty maintenance applications Tedpfxsz Dgt To Ahmec Technical specifications: *Working pressure: 1000 bar (14,500 PSI) *Flow rate: 17 l/min *Electric motor: 30 kW *Voltage: 400V / 50Hz / 63A *Pump type: Triplex plunger pump *Water tank: 20 L *Motor protection: IP54 *Dimensions (L × W × H): 116 × 80 × 130 cm *Weight: approx. 560 kg *Operating hours: 351 h *Key features and advantages: *Only 351 operating hours *1000 bar ultra-high pressure performance *Robust industrial trolley construction *High reliability and long service life *Electric drive with low operating costs *Included 1000 bar gun, nozzle holder, nozzle, and 10 m hose *Immediate availability *Fully functional and ready for operation Please contact us for additional information, photos, pricing, or inspection arrangements.

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, total width: 3,100 mm, total length: 11,500 mm, total height: 2,500 mm, overall weight: 2,500 kg, empty load weight: 2,500 kg, We offer this ready-to-use Lanemark Contino 550 SSP box cleaner, manufactured in 2009. Tsdezymicopfx Ahmec Manufacturer: Lanemark Model: Contino 550 SSP Year of manufacture: 2009 Condition: ready to use Category: 32 Type: Box cleaner If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, operating pressure: 70 bar, total length: 920 mm, total height: 1,050 mm, total width: 640 mm, pressure: 70 bar, type of input current: three-phase, overall weight: 105 kg, Fogging device CLENA SANICLEN XL MCM3500 Discontinued model, available at a reduced price! Data for motor-pump unit: • Water pressure 70 bar • Brass cylinder head and ceramic piston, 1450 rpm • 2.2 kW or 3 kW electric motor with 1450 rpm, 400 V, 50 Hz • Flow rate 15 L/min or 21 L/min Data for fogging fan: • Nozzle ring with 410 mm diameter and 30 nozzles • Adjustable tilt angle from 0-40° • Maximum coverage: 150 m² • Power: 2.2 kW, 2800 g/min • Fan jet: 21 m (without wind) • Noise: < 87 Lwa • Droplet size 24 μm Todpfjz Hyh Nox Ahmjc Application areas: • Disinfection of large areas • Dust suppression • Cooling • Pest control • Odor neutralization • Surface cleaning

Condition: used, Year of construction: 2019, operating hours: 3,420 h, functionality: fully functional, machine/vehicle number: W09FAL226KMF14072, operating pressure: 500 bar, total length: 2,700 mm, total height: 2,100 mm, total width: 2,100 mm, pressure: 500 bar, empty load weight: 2,600 kg, input voltage: 12 V, fuel: diesel, heating capacity: 198 kW (269.20 HP), overall weight: 2,600 kg, water tank capacity: 400 l, fuel tank capacity: 220 l, temperature: 100 °C, volume flow: 1.8 m³/h, noise level: 100 dB, pressure (max.): 500 bar, Falch Trail jet 30 500-30-95-d high-pressure cleaner, year of construction 2019. The machine runs at a pressure of 100 - 500 bar and a temperature of 10⁰c - 100⁰c. Its has a remote control feature to remotely control temp, pressure and on and off. Also it comes with the front storage box. The machine has been fully serviced and maintained by falch. It has been well looked after with one owner from new. Manufacturer: Falch Model: Trail jet 30 500-30-95-d Construction year: 2019 Serial number: G57200378 EU type number: e1*2007/46*0386*01 Identification number: W09FAL226KMF14072 Weight: 2600 kg Vertical load: 120 kg Axle 1 load: 1300 kg Axle 2 load: 1300 kg Tedpjy Sazfsfx Ahmec If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2022, filter unit . . make HYDAC type FLND KS 400 DDF 50 C 1.2 /-B7 operating pressure max. 25 bar Receiver 2x 3,10 L make GRUNDFOS type MTR3-27/27 A-W-A-HUUV frequency 50 Hz Power 2,20 kW turning speeds 2.863 U/min Headroom 131 m Headroom max. 179 m feed pressure max. 25 bar Temperature max. 90 °C 0 Counter-Clockwise (CCW) dimensions of the machine ca. 0,6 x 0,6 x 1,2 m High-pressure Cooling Retrofit / Conversion Kit for NLX Machines Filter Pump Combination 15 bar GRUNDFOS / HYDAC Tjdpfx Ahozfqgismec - NEW and in original packaging consisting of: - HYDAC filter unit 15 bar - GRUNDFOS pump 15 bar - Electrical component kit - pre-assembled

Condition: excellent (used), HELMUT FISCHER X-ray fluorescence measuring device / film thickness measuring device Tedpoz Egi Rsfx Ahmec FISCHERSCOPE X-RAY XDL-XYZpT8 Professional X-ray fluorescence measuring system for film thickness and material analysis For sale is a used X-ray fluorescence measuring device from the manufacturer Helmut Fischer GmbH + Co. KG, Germany. The FISCHERSCOPE X-RAY is suitable for non-destructive film thickness measurement and material analysis using X-ray fluorescence (XRF). The system is designed for measurements of functional layers, anti-corrosion layers, and various metallic coatings, and is used in quality assurance, laboratories, research, and manufacturing. Technical data: Manufacturer: Helmut Fischer GmbH + Co. KG Model: FISCHERSCOPE X-RAY Type: XDL-XYZpT8 Serial number: SN010002436 Made in Germany CE marking present Measuring system: X-ray fluorescence measuring device (XRF) For non-destructive film thickness measurement Suitable for functional layers and anti-corrosion layers Large measuring chamber with C-shaped slit Standard X-ray tube Proportional counter Fixed aperture and fixed filter DCM travel 0–80 mm Electrical data: Supply voltage: 230 V AC Frequency: 50–60 Hz Power consumption: 120 W Connections: Power connection Serial interface (Sub-D) Other connections as shown in the pictures Equipment: Helmut Fischer FISCHERSCOPE X-RAY measuring device Measuring chamber with protective cover Software Operating manual Additional accessories as shown in the pictures Areas of application: Film thickness measurement Material analysis X-ray fluorescence analysis (XRF) Quality assurance Electroplating Surface technology Material testing Laboratory Research and development Scope of supply: Helmut Fischer FISCHERSCOPE X-RAY XDL-XYZpT8 Software Operating manual Scope of supply as shown in the pictures Condition: Used The device comes from a warehouse clearance. Optical condition as shown in the pictures. Important note: The device has not been tested by us and is sold explicitly as is and without warranty. The table shown in the photos, as well as other items not explicitly mentioned, are not part of the sale. Due to its size and weight, shipping can be arranged via a freight forwarder. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: like new (used), Year of construction: 2016, functionality: fully functional, operating pressure: 180 bar, high-pressure hose length: 10,000 mm, input voltage: 400 V, overall weight: 230 kg, temperature: 140 °C, The MH-8P 180/2000 model is ideal for medium-sized and large industrial facilities where cleanliness is a top priority. The hot water cleaner is also successfully used in transportation companies, auto repair shops, and agriculture. It is also popular with private customers who value the highest cleaning quality. Hot water cleaners are particularly recommended for areas with grease or oil contamination. Water temperatures above 70°C enable dirt removal up to five times faster than cold water cleaners! Technical Specifications: Model: MH-8P 180/2000 Manufacturer: NILFISK Condition: Display Unit Year of Manufacture: 2016 Power Supply (~/V/Hz): 3 / 400 / 50 Pump Output (l/h): 2000 Operating Pressure (bar): 180 Maximum Pressure (bar): 250 Maximum Water Temperature (°C): 70–140 Connected Load (kW): 12 Power Cable (m): 5 Fuel Tank (l): 32 Chemical Tanks (l): 15+10 Weight (kg): 230 Tjdewqw Tpspfx Ahmec Dimensions (L x W x H) (mm): 1190 x 702 x 1020 Equipment: High-Pressure Gun: Nilfisk Ergo 3000 – 250 bar – 150 °C High-pressure hose: Nilfisk Longlife DN10 – 500 bar – 155 °C Spray lance: Nilfisk Tornado 1120 mm – 300 bar with pressure regulation Nozzle: Flat jet power nozzle. Flat high-pressure jet with high surface coverage and good dirt-removing power. External control panel: Wired Schneider Electric remote control for controlling machine functions without having to go to the machine. Key features: The easily accessible water filter protects the pump from impurities in the water. Water softening system protects the heating coil from limescale deposits. Convenient handles on the housing + integrated nozzle storage Open oil system – no operating time limit Two integrated chemical tanks allow the cleaning fluid to be dosed directly via the machine. Easy-to-read and intuitive control panel The simple design and easy access to the individual components under the housing make the machine user-friendly and easy to maintain.

Condition: like new (used), Year of construction: 2023, operating hours: 800 h, functionality: fully functional, HAMMELMANN® Aquajet 50™, HDP503™, manufactured in 2023, approximately 800 operating hours. Installed in a 20´ soundproof container. Scania® diesel engine, 566kW, Stage V, AdBlue™. ES4™ control unit. 1600 bar / 166 liters. Fully inspected. Ideal for hydrodemolition robot applications and industrial cleaning (TRG 1600 XL). Trailer not included. Todpfezy Hahex Ahmoc

Year of construction: 1993, condition: excellent (used), functionality: fully functional, For sale: original Amafilter B.V. stainless steel pressure leaf filter with approx. 5 m² filtration area. Complete automatic filtration unit with PLC control cabinet, pneumatic valves, sensors, piping, fittings and support frame/platform. Main data: - Manufacturer: Amafilter B.V., Alkmaar, Holland - Type: vertical pressure leaf filter - Filtration area: approx. 5 m² - Filter vessel: stainless steel - Vessel volume: approx. 450 L - Max. working pressure: 6 bar - Max. working temperature: 150 °C - Year of filter vessel: 1993 - Automation: included - Control: PLC control cabinet - Valves: pneumatic valves - Includes sensors, piping, fittings, hoses and support frame/platform - Condition: used, fully functional according to seller information - Location: Serbia Suitable for filtration of vegetable oil, rapeseed oil, sunflower oil, soybean oil, technical oils, biodiesel and oleochemical applications. The filter can be used for crude oil clarification, post-degumming filtration, bleaching earth filtration and general liquid-solid separation in oil processing. The unit is sold as shown in the photos. Tjdpfezfyafjx Ahmec Inspection possible. Loading possible. Zum Verkauf steht ein originaler Amafilter B.V. Edelstahl-Druckblattfilter mit ca. 5 m² Filterfläche. Komplette automatische Filteranlage mit PLC-Schaltschrank, pneumatischen Ventilen, Sensoren, Rohrleitungen, Armaturen und Tragrahmen/Plattform. Technische Daten: - Hersteller: Amafilter B.V., Alkmaar, Holland - Typ: vertikaler Druckblattfilter - Filterfläche: ca. 5 m² - Filterbehälter: Edelstahl - Behältervolumen: ca. 450 L - Max. Betriebsdruck: 6 bar - Max. Betriebstemperatur: 150 °C - Baujahr Filterbehälter: 1993 - Automatisierung: inklusive - Steuerung: PLC-Schaltschrank - Ventile: pneumatische Ventile - Sensoren, Rohrleitungen, Armaturen, Schläuche und Tragrahmen/Plattform inklusive - Zustand: gebraucht, laut Verkäuferangabe voll funktionsfähig - Standort: Serbia Geeignet für Pflanzenöl, Rapsöl, Sonnenblumenöl, Sojaöl, technische Öle, Biodiesel und oleochemische Anwendungen. Einsetzbar für Rohölklärung, Filtration nach Entschleimung, Bleicherdefiltration und allgemeine Fest-Flüssig-Trennung in der Ölverarbeitung. Verkauf wie auf den Fotos. Besichtigung möglich.

Condition: good (used), Year of construction: 2016, High-pressure cleaner, hot water high-pressure cleaner -Manufacturer: Ehrle, Hot water high-pressure cleaner -Type: HD 1140 Electronic II -Operating pressure: 30-230 bar -Spray flow rate: 16 l/min / Steam setting: 7 l/min -Hot water output: 30-98°C / Steam setting: 150°C -Power connection: 3/PE/AC/50Hz/400V Tedpez Duf Rjfx Ahmsc -Cleaning agent: High-pressure jet application and quantity control -Dimensions: 1200/800/H1000 mm -Weight: 225 kg

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions Tedpfx Aefz Ax Sehmoc The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.