Used Pressure Sensor for sale (20,752)

Condition: used, Year of construction: 2011, operating hours: 3,690 h, functionality: fully functional, machine/vehicle number: W09D500THBAD43025, operating pressure: 500 bar, total length: 3,695 mm, high-pressure hose length: 50,000 mm, total height: 2,026 mm, total width: 2,050 mm, pressure: 500 bar, empty load weight: 1,695 kg, input voltage: 12 V, fuel: diesel, heating capacity: 115 kW (156.36 HP), overall weight: 2,900 kg, water tank capacity: 1,000 l, fuel tank capacity: 50 l, power: 32.4 kW (44.05 HP), temperature: 150 °C, DGUV certified until: 11/2028, Dynajet 500TH Lodpoz Eg Dhefx Amzshn 28 l/min at cold water Maximum pressure: 500 bar 3695 operating hours Recently serviced Imported to Sweden in 2026 WITH HOT WATER UP TO 150°C!!!

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology Lodpfx Aefzrapsmzehn User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: like new (used), Year of construction: 2026, operating hours: 1 h, functionality: fully functional, machine/vehicle number: GP1000-GE1065BD, operating pressure: 220 bar, total length: 1,900 mm, high-pressure hose length: 20 mm, total height: 1,300 mm, total width: 1,200 mm, pressure: 220 bar, empty load weight: 160 kg, fuel: super 95, overall weight: 170 kg, water tank capacity: 1,000 l, warranty duration: 24 months, fuel tank capacity: 6 l, The Gaspper GP1000 high pressure washer is designed for the most demanding cleaning jobs in different areas of our economy. Mainly targeted areas are construction, agriculture, industry of any kind, as well as various public services. Depending on the specific requirements, the possibilities of use are almost endless. Key Features Petrol Engine: Briggs&Stratton XR950, 4-stroke, OHV Power: 6.5 HP / 4.7 kW Water pressure: 220 bar / 3.200 PSI Flow rate: 14 l/m The water tank with a capacity of 1000L and the 15L detergent tank, combined with a 4-stroke heat engine mounted on a solid metal frame, gives enviable independence from the running water and electricity cables. The machine can be used in the most isolated areas. The device is moved from one place to another with the help of a forklift or front loader. Package contents: High-pressure washer Pressure gun 20m high-pressure rubber hose Stainless Steel Extension Lance Nozzle 0 ̊ Nozzle 15 ̊ Nozzle 25 ̊ Nozzle 40 ̊ Soap nozzle Waspper engine oil Operation manual Lodj Aayaropfx Amzohn Water Tank – 1000L

Condition: used, Year of construction: 2011, operating hours: 8,176 h, functionality: fully functional, machine/vehicle number: WPUD500H0B2000955, operating pressure: 500 bar, total length: 3,650 mm, high-pressure hose length: 50,000 mm, total width: 2,070 mm, pressure: 500 bar, empty load weight: 1,630 kg, input voltage: 12 V, fuel: diesel, overall weight: 2,900 kg, water tank capacity: 1,000 l, fuel tank capacity: 50 l, power: 34.5 kW (46.91 HP), DGUV certified until: 10/2026, Dynajet 500TH 30 l/min Maximum pressure: 500 bar 8176 operating hours Regularly maintained, recently serviced, not in operation during winter (only April–October) Owned by the same operator since new For cold water only; can be retrofitted for heating water. Lhedpfx Aez Egw Uemzjn

Condition: like new (used), Year of construction: 2019, functionality: fully functional, overall weight: 2,500 kg, rotational speed (min.): 4,500 rpm, screw diameter: 305 mm, year of last overhaul: 2026, temperature: 80 °C, empty load weight: 2,500 kg, power: 22 kW (29.91 HP), Equipment: documentation/manual, rotational speed infinitely variable, Complete Technical Data (GEA OCE 305-01-32)Technical ParameterSpecification and ValuesManufacturer & ModelGEA Westfalia Separator Group GmbH – OCE 305 SeriesEquipment TypeHigh-performance 2-phase decanter centrifuge (Solid-Liquid)Bowl Inner Diameter305 mmBowl DesignFlat-cone design with an extended length (Extended L/D ratio)Maximum Hydraulic CapacityUp to 5 m³/h (varies depending on solid concentration)Maximum Solids Density 2.6 kg/dm³Drive Type2-Gear Drive (System with 2 independent motors, no magnetic brake)Differential Speed ControlAutomatic via dedicated Variable Frequency Drives (VFD)Overall DimensionsLength: 3000 mm | Width: 1000 mm | Height: 1150 mmTotal Weight (Complete Skid)Approx. 2500 kgLubrication SystemAutomatic centralized grease lubrication for main bearingsConstruction MaterialsHigh-grade duplex stainless steel (all product-contact areas)Scroll Wear ProtectionSintered tungsten carbide tiles welded onto the flight edgesII. Liquid Discharge Under Pressure SystemUnlike standard models with gravity discharge (where the liquid falls freely into acollection tank), your model retains the clarified liquid phase inside a hydro-hermetic tripetal Pump (Paring Disk): The separated liquid flows toward the cylindrical end of the bowl, entering a special chamber where a stationary disk with spiral internal channels (a reverse turbine) is etic-to-Pressure Energy Conversion: The kinetic energy of the rapidly rotating liquid is instantly transformed into hydrostatic pressure when it hits the channels of the stationary cess Advantages: The liquid leaves the decanter directly under pressure (without requiring an external transfer pump). This prevents product foaming (highly critical for oils, chemical products, or food-grade applications) and eliminates contact with atmospheric oxygen Ledpfxozgq Sze Amzohn Electrical cabinet with frequency inverters ant PLC (Siemens ) with acces code for modify the parameters , including factory documentation

Condition: good (used), DHI PPCH-G High Pressure Gas Controller/Calibrator 100MPa / 15,000psi With Carry Case Lhodpfo Ad D Nlox Amzjn Pressure control to 100MPa (15,000 psi). AutoRange feature. One of two Q-RPT’s in each controller with 10:1 turndown. Supports external reference pressure transducers. FLASH memory for simple and free embedded software upgrades.

Condition: used, Year of construction: 2006, operating hours: 4,803 h, functionality: fully functional, machine/vehicle number: WPUD500H062000449, operating pressure: 500 bar, total length: 3,650 mm, high-pressure hose length: 50,000 mm, total width: 2,080 mm, pressure: 500 bar, type of input current: DC, empty load weight: 1,620 kg, input voltage: 12 V, fuel: diesel, overall weight: 2,900 kg, water tank capacity: 1,000 l, fuel tank capacity: 50 l, power: 32 kW (43.51 HP), DGUV certified until: 09/2026, Dynajet 500TH 30 L/min 500 bar 4800 operating hours Regularly maintained, recently serviced, not operated in winter (only April–October) New engine installed in September 2026, invoice available Lhodpfx Amjz Egmcezsn Imported to Sweden from Germany in 2021.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total length: 1,100 mm, total height: 1,805 mm, total width: 650 mm, pressure: 60 bar, type of input current: three-phase, empty load weight: 140 kg, input voltage: 400 V, fuel: electricity, heating capacity: 3 kW (4.08 HP), overall weight: 240 kg, water tank capacity: 100 l, temperature: 45 °C, input current: 16 A, The enclosed cabinet, made of stainless steel, delivers a high-pressure solution (up to 60 bars) for precise and optimal cleaning or degreasing of mechanical parts. This compact washing station operates in a closed-loop system, making it highly economical in terms of product usage and suitable for any maintenance workshop. STANDARD FEATURES: • Adjustable high-pressure washing pump, up to 60 bars • Foot pedal control • 60-micron filter • High-pressure spray gun • Compressed air blower inside the cabinet • Air blower for cleaning the window • LED lighting • Heating element controlled by an adjustable thermostat • Low-level control and safety cut-off • New gloves • Year: 2020 • Weight (kg): 140 Lsdpfx Amez Tfbcezohn • Dimensions (L x W x H mm): 1100 x 650 x 1805 • Work surface (mm): 850 x 650 • Payload (kg): 50 • Usable washing height (mm): 600 • Tank volume (L): 100 • Operating pressure (bar): 30 to 60 • Pump flow rate (l/min): 14 • Heating power (kW): 3 • Electrical supply: 400V Three-phase – 16A • Pneumatic supply: 6 - 7 bars

Condition: like new (used), Year of construction: 2026, operating hours: 40 h, functionality: fully functional, pressure: 2,500 bar, year of last overhaul: 2026, We are selling our IBAK MicroGator with a UHP high-pressure water cleaning system for main pipelines DN 200–DN 800. The robot was only used for one project and has not been used since. * Only 4 months old * Used for only 5 working days * No signs of wear – like new Lhodpfx Amjz Aupiozon * Equipped for Ultra High Pressure (600–2500 bar), compatible with Falch and Hammelmann * Original price: €66,000 * Our price: €50,000 (negotiable) The robot is currently located in the Czech Republic. However, after prior arrangement, it can also be made available in the Cham area in Bavaria. Filip Khol rohrsanierung1a.de

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 68370, SMB Technik Multima 9R/9L/3K automatic beer bottling monobloc for rinsing, counter-pressure filling and crown capping of glass bottles. The machine was previously in operation at a Norwegian brewery. Following the sale and removal of the labelling machine, an electric motor is required to drive the bottling line. The electric motor is not included in the sale. The SMB rinsing, filling and capping monobloc was operational prior to this change and can be inspected at its current location in Norway. CONFIGURATION * 9-station bottle rinser * 9-head counter-pressure filler * 3-head crown capper * Automatic bottle transfer through rinsing, filling and capping sections * Conveyor sections * CO₂ counter-pressure / isobaric filling * Long-tube bottom-up filling * Separate bottle pressurising and return-gas system * Automatic filler bowl level and pressure control * High-pressure injection / jetter before capping * Electrically interlocked safety doors * Automatic bottle presence monitoring FILLING PROCESS The Multima is designed for bottling beer in glass bottles. Bottles are rinsed before being transferred to the filling section. Before filling, the bottles are pressurised, normally using CO₂. Beer is then filled from the bottom through long filling tubes. The system uses separate channels for bottle pressurising gas and return gas and is designed to minimise turbulence, foaming and oxygen uptake. After filling, the bottles pass a high-pressure injection device (jetter), which produces controlled foaming to help displace air from the bottle neck immediately before crown capping. TECHNICAL DATA Manufacturer: SMB Technik GmbH, Mannheim, Germany Model: Multima 9R/9L/3K Year: 2000 Serial number: 68370 Electrical supply: 400 V / 50 Hz Current: 12 A Container: Glass bottles Product: Beer Closure: Crown caps Filling principle: Counter-pressure / isobaric Rinser: 9 stations Filler: 9 filling valves Capper: 3 heads A 400 V to 230 V converter is included in the sale. Lhodpfx Aez Dhrqemzon DOCUMENTATION Extensive original SMB technical documentation is available, including operating instructions, setup and adjustment procedures, bottle changeover information, cleaning and sanitising procedures, maintenance and troubleshooting information, as well as filling-valve technical documentation. IMPORTANT The labelling machine has been sold separately and is NOT included. An electric motor is required to operate the bottling line and is NOT included. Tanks and other brewery equipment visible in the photographs are not included unless specifically agreed. The machine is located in Norway and can be inspected by appointment. Dismantling, loading and transport can be discussed separately.

Condition: used, Year of construction: 2020, general refurbished, very good condition Ledpfxjz S Rb Sj Amzjhn with preevacuation filling valves: 16 working direction: right-left (CCW)

Condition: used, Year of construction: 2019, operating hours: 196 h, functionality: fully functional, machine/vehicle number: W09D013KWKAD43636, operating pressure: 500 bar, total length: 2,910 mm, high-pressure hose length: 500 mm, total height: 1,770 mm, total width: 1,720 mm, pressure: 500 bar, empty load weight: 760 kg, fuel: diesel, heating capacity: 115 kW (156.36 HP), overall weight: 760 kg, water tank capacity: 300 l, fuel tank capacity: 70 l, power: 13 kW (17.68 HP), temperature: 95 °C, volume flow: 0.9 m³/h, noise level: 104 dB, pressure (max.): 500 bar, Equipment: chassis, crane, This well-maintained DYNAJET 500th 15 HELI hot and cold water high-pressure unit is available for immediate delivery. Manufactured in 2019 and having only 196 operating hours, the machine is in excellent condition and is being delivered fully serviced, fully functional, and ready for operation. Designed for demanding industrial cleaning applications, the DYNAJET 500th 15 HELI combines powerful cleaning performance with compact dimensions, low weight, and excellent mobility. With an operating pressure of up to 500 bar and hot water temperatures up to 95°C, the machine is ideally suited for removing heavy contamination, coatings, grease, and industrial residues. The unit is equipped with a reliable Kubota diesel engine, integrated hot water system, and a large 300-litre water tank for independent operation even where external water supply is limited. The trailer-mounted design ensures maximum flexibility and easy transportation between jobsites. To ensure many years of reliable operation, the machine will be supplied with a brand-new 50 m high-pressure hose. A turbo nozzle and standard flat-jet nozzle are included in the sale. Key features and advantages: * Year of manufacture: 2019 * Only 196 operating hours Ljdpfx Aez Nd Ndemzshn * Fully serviced before delivery * Fully functional and ready for operation * Maximum operating pressure: 500 bar * Flow rate: up to 15 l/min * Hot water temperature up to 95°C * Powerful Kubota 3-cylinder diesel engine * Integrated hot water system with high-performance burners * 300-litre integrated water tank * Approx. 70-litre fuel tank * Trailer-mounted unit with overrun brake * New 50 m high-pressure hose included * Turbo nozzle included * Standard nozzle included * Compact, robust and easy to transport *Ideal for industrial cleaning, surface preparation and professional service applications Please contact us if you are interested or would like to receive further information, pricing details, additional photos, or arrange a viewing of the machine. We will be pleased to assist you.

Condition: good (used), Well-maintained Falch Trail Jet 15 500 bar 490 operating hours Lhedpfsuvd N Sox Amzjn Year of manufacture 2021 Hot water Regularly serviced by Falch Various accessories available as options

Condition: used, Year of construction: 2015, operating hours: 5,201 h, functionality: fully functional, machine/vehicle number: W09HKF1011SHB8027, operating pressure: 550 bar, total length: 3,950 mm, high-pressure hose length: 50 mm, total height: 1,880 mm, total width: 1,870 mm, empty load weight: 1,200 kg, fuel: diesel, overall weight: 1,800 kg, water tank capacity: 500 l, noise level: 93 dB, DGUV certified until: 03/2027, Oertzen PT500 30 l/min Maximum pressure: 500 bar Lsdpfx Ajz Ega Nemzshn 5200 operating hours Regularly maintained, recently serviced, not operated in winter (only April–October) Owned by the same operator since new For cold water only; heating element has been removed.

Condition: ready for operation (used), functionality: fully functional, Description: A complete compression testing station, consisting of a 20T hydraulic press from RYS and a professional measuring system from AXIS, including a ZEMIC strain gauge. The equipment comes from a SHILOH production plant that is being decommissioned in Bielsko-Biała. It was used for force insertion tests, strength tests, and quality control. The set includes: RYS FR-5019 hydraulic press – 20T AXIS force meter – PEAK, PRINT functions, units in kg/N/lbs ZEMIC load cell (strain gauge) – range 2000 kg Blocks, fixtures, and tools as shown in the pictures Analog pressure gauge Hydraulics and hoses Table height adjustment on bolts Applications: Force insertion tests Laboratory testing Quality control and R&D Assembly and disassembly of components Design workshop / toolroom Ljdpfx Amez Rvywszehn

Condition: new, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 15-8922-1-2, Vertical SS304L stainless steel high-pressure tank with torispherical heads, 3900-gallon capacity, BRAND RICSA, temperature range -20 to 212 °F, pressure 19.5 kg/cm2; ASME certification, YEAR 2016, SERIAL NO. 15-8922-1-2, dimensions: 75" diameter, 228" length; flanged inlets and outlets of various diameters. Tanque vertical en acero inoxidable SS304L con tapas toriesfericas para alta presión con capacidad de 3900 galones, Marca RICSA, Temperatura desde -20 a 212 °F, con presión de 19.5 kg/cm2; Certificación ASME, Año 2016, Serie 15-8922-1-2, Medidas diámetro 75", Largo 228", cuenta con entradas y salidas de brida en diferentes diámetros. Lhsdpsz Svcnjfx Amzon

Condition: new, Year of construction: 2016, functionality: fully functional, machine/vehicle number: 15-8922-3-1, Vertical SS304L stainless steel high-pressure tank with torispherical heads, 10,000-gallon capacity, BRAND RICSA, temperature range -20 to 212 °F, pressure 19.5 kg/cm2; ASME certification, YEAR 2016, SERIAL NO. 15-8922-3-1, dimensions: 120" diameter, 216" length; flanged inlets and outlets of various diameters. Ledpfxjz Svche Amzehn Tanque vertical en acero inoxidable SS304L con tapas toriesfericas para alta presion con capacidad de 10,000 galones, Marca RICSA, Temperatura desde -20 a 212 °F, con presion de 19.5 kg/cm2; Certificacion ASME, Año 2016, Serie 15-8922-3-1, Medidas diametro 120", Largo 216", cuenta con entradas y salidas de brida en diferentes diametros.

Condition: good (used), Year of construction: 2016, High-pressure cleaner, hot water high-pressure cleaner -Manufacturer: Ehrle, Hot water high-pressure cleaner -Type: HD 1140 Electronic II -Operating pressure: 30-230 bar -Spray flow rate: 16 l/min / Steam setting: 7 l/min -Hot water output: 30-98°C / Steam setting: 150°C Lhsdpfxoz Duf Ro Amzjn -Power connection: 3/PE/AC/50Hz/400V -Cleaning agent: High-pressure jet application and quantity control -Dimensions: 1200/800/H1000 mm -Weight: 225 kg

Year of construction: 2024, condition: like new (used), functionality: fully functional, Stainless steel steam sterilization autoclave Pass-through autoclave, GXMQ-KK.13.8JS Model: STAU-26.3 Serial No.: G2310 Power: 11 kW Voltage: 380V/50Hz & 230V/50Hz Ledoz Td Alopfx Amzjhn Operating pressure: +0.5 bar / -0.88 bar Weight: 20,000 kg Self-dismantling and removal included.

Year of construction: 2020, condition: new, PLC microprocessor control • HMI operator panel • Phases changed manually or automatically - temporarily Ledeflpmqopfx Amzehn • Two separate circuits for water and chemistry, closed circuit • Intelligent control - in the event of a power cut / sudden shutdown, no mixing of liquids possible The control box is made of IP54 technology User manual, Declaration of conformity, 12 months warranty. ROMER pressure washers use metal sheet that provides protection against chemicals. The washer walls protect against splashing, thanks to the closed chemistry loop, the process can be carried out with small amounts of chemistry. Due to the small amount of refrigerant required, it is easy to heat and cheaper to buy, it also allows you to wash large dimensions impossible to wash in bath tubs. Filtration system Thanks to the filtration system, the chemistry works in a closed circuit, 3 filters of different thickness are used, which prevent garbage and grease from entering the circulation. The chemistry is stored in heated stainless steel tanks from where it is fed by a pump under pressure to the lance Washing of dimensions The pressure washer allows washing of large elements, optionally has a rotating platform that allows rotation of the cleaned element, elements can be applied to it with a forklift or crane. High pressure pumps The car wash has two preparation phases, both treatments have separate sets of pipes, pumps, wires and guns to minimize mixing of these agents during phase change. Drains have separate valves that manage the return of funds. The carwash is equipped with a logic controller that controls all components. The chemistry is pumped up to 20 bar using a very durable, acid-resistant AISI304 pump with several stages, 3 kW. The rinsing phase uses a high pressure piston pump with ceramic pistons with a capacity of 3kW and provides 160 - 200 bar.

Condition: used, functionality: unexamined, For sale: an industrial Nilfisk ALTO SOLAR BOOSTER 7-58E18H high-pressure washer with electric water heating, 18 kW. This stationary unit is designed for cleaning machines, equipment, floors, and industrial fixtures. Technical specifications according to the nameplate: Manufacturer: Nilfisk ALTO Model: SOLAR BOOSTER 7-58E18H Product number: 107370270 Serial number: 3520122200419 Working pressure: 170 bar Maximum permissible pressure: 250 bar Flow rate: 18.5 l/min – 1110 l/h Maximum temperature (according to nameplate): 85°C Electric heating power: 18 kW Total rated power: 25.5 kW Power supply: 400 V, three-phase, 50 Hz Lods Ad Nkbopfx Amzshn Rated current: 39 A Protection rating: IPX5 Weight: 155 kg Country of manufacture: Hungary Equipment visible in the photos: High-pressure hose Nilfisk high-pressure gun Spray lance Pressure gauge Water temperature adjustment Control panel with START/STOP buttons and a main switch The unit has an additional marking on the housing: “MAXIMAL 70 Grad,” indicating a temperature limit of 70°C. The unit is used and shows visible signs of wear.

Condition: ready for operation (used), Year of construction: 1994, operating hours: 1,620 h, functionality: fully functional, machine/vehicle number: 00676/1, rotational speed (max.): 2,880 rpm, type of input current: three-phase, pressing: 16,000 Pa, input voltage: 380 V, power: 7.5 kW (10.20 HP), input frequency: 50 Hz, input current: 14 A, Gray machine, used very little, but tested. Identical model in red, but older, tested, runs perfectly, price negotiable. Other high-pressure fans with lower capacity are available, all tested, prices negotiable. Lodpfxez Ig N Aj Amzohn

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, warranty duration: 1 months, Equipment: documentation/manual, type plate available, ZEISS LineScan 2-50 optical laser line scanner, manufactured May 2019. Ljdpfx Aozvrmxomzehn Manufacturer: Carl Zeiss MT GmbH Order No.: 600780-9441-000 Serial No.: 21901006 CE compliant, Laser Notice No. 50 (2007) Complete with case as pictured

Condition: used, Year of construction: 1985, machine/vehicle number: 324-016, filling valves: 24 capacity / hour ca.: 4500 working direction: left-right filling system: vacuum filling Ljdpfxjz S Rd Hs Amzohn Dim. L x W x H [m]: 1,8 x 2 x 2,4 Details: zentrale Höhenverstellung 1,80 Breit, 1,80 Tief, 2,50 Höhe

Condition: excellent (used), functionality: fully functional, overall weight: 60 kg, total height: 175 mm, jaw width: 200 mm, total length: 615 mm, total width: 200 mm, jaw height: 60 mm, clamping width: 200 mm, clamping range: 435 mm, Equipment: type plate available, Allmatic-NC machine vice, high-pressure clamping device Type LC 200 including a second pair of clamping jaws, width 200 mm Jaw width 200 mm Base body, type LC 160/200 (for jaw widths of 160 and 200) Base body width 164 mm Clamping force adjustable, max. 60 kN Level 0: direct Level 1: 15 kN Level 2: 30 kN Level 3: 45 kN Level 4: 60 kN Lsdpfxszfimuj Amzjhn Clamping range a: 0-250 mm Clamping range b: 189 – 435 mm Jaw height 60 mm Base body length 530 mm Overall length 615 mm Base body height 115 mm Weight 60 kg Used, in good condition optional: Clamping jaws, width 160 mm, height 50 mm, new € 200.00 Aluminum jaws, width 200, height 60 mm, height 80 mm, new € 200.00 Worm gear € 100.00