Used Prominent Cip for sale (427)

Condition: used, functionality: fully functional, first registration: 11/2011, fuel type: diesel, color: orange, fuel: diesel, gearing type: automatic, suspension: steel, Year of construction: 2011, operating hours: 2,024 h, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, navigation system, trailer coupling, Holder C270 Drive system 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four wheels of equal size, Stepless speed selection with a total of four pre-selectable driving ranges Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, can be switched on simultaneously electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heating High roof Heat-insulating glazing and sliding windows on the sides Multifunction display (tachometer, operating hour counter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Mechanically adjustable steering column 3 storage compartments, sunshade film, interior cab light with door contact switch Hydraulics Multifunction arm console with driving program and differential lock switch Hydrostatic articulated steering with 2 double-acting steering cylinders Additional equipment Mounting frame for tool-free switching between platform and attachments Locking rail at the front for adjusting the upper link Electrical system: AC alternator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Radio: wiring harness, antenna, speaker covers Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Wiring prepared for rear marker light via Super-Seal plug Biodegradable hydraulic oil Stainless steel support pad Standard paint finish: orange RAL 2004 and gray RAL 7021 Front linkage Front linkage including safety hook, CAT II/CAT I with passive tilt adjustment Rotating beacon Locking bracket Hydraulic flow divider 1 Flow divider, circuit 1, adjustable from 0–25 l/min with line set to the front and rear Return line to the front and rear Hydraulic set, attachment control pump Attachment control pump, 0–80 l/min, variable Line set to the front and rear Return line to the front and rear Leakage oil line to the front and rear Hydraulic tipping device for implement arms Hydraulic set 2 3 double-acting control valves 2 with floating position 6 quick-release couplings 2 quick-release couplings at the rear, connected to the front via a T-piece with quick-release couplings Active hydraulic tilt adjustment 1 multifunction joystick for 5 double-acting functions including direction switch and speed control Comfort package Driver's seat with air suspension, armrest, air conditioning Hydraulic tipping device for cab Rear view camera 2 work lights at the rear Ball head, permanently mounted 1 NEW DIESEL ENGINE KUBOTA WITH 12 MONTHS FACTORY WARRANTY!!! In addition, the following options are available at an extra charge: 1. PRICE INCREASE PLATFORM, DEMO UNIT Platform 1250 x 1060 x 300 mm (can be retrofitted at any time) – currently installed €2,750 plus VAT 2. PRICE INCREASE TOWING HITCH, NOT SELF-ADJUSTING, HEIGHT ADJUSTABLE, DEMO UNIT Isdpfx Aozdkc Ujn Iebc €470 plus VAT 3. PRICE INCREASE Retrofitting manual central lubrication system €1,600 plus VAT 4. PRICE INCREASE HYDRAULIC REAR PTO €1,990 plus VAT Subject to change, typing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: good (used), Perfecta 168 TS paper guillotine The machine is in very good condition and ready for production. Year of manufacture: 2010. Available immediately from stock. The guillotine can be used as a standalone unit or integrated into cutting systems. Program creation is handled via the menu and covers a wide range of cutting tasks, such as single cuts, custom programming, multiple cuts, clamping without cutting, and automatic transfer of actual values. Perfecta premium-class paper cutters are manufactured in Bautzen, Germany. Distinguishing features of Perfecta machines: – Interactive user interface Ibsdpfxjz S Uy Ee An Isc – 18.4” touchscreen – USB interface – Ethernet interface – Windows CE operating system – CIP data module – Positioning via an electronic handwheel – Optimized cutting cycle – Programmable clamp pressure – Automatic adjustment of clamp pressure based on cutting width – Automated front-access knife change – Quick-change knife system – New, single-piece cast machine frame for increased stability – Maintenance-free electromagnetic clutch Technical specifications: Cutting length: 1680 mm Maximum pile height: 165 mm Insertion depth: 1680 mm Minimum cut with false clamp plate: 77 mm Minimum cut without false clamp plate: 26 mm Maximum backgauge speed: 300 mm/s Backgauge guidance: above the work table Main motor power: 7.5 kW Net weight: 6900 kg The machine comes equipped with a spare knife, a paper jogger, a false clamp plate, documentation, and a set of tools.

Year of construction: 2020, condition: new, functionality: fully functional, Equipment: documentation/manual, Package 14 PP6713 – CS6713 Brinox LEP 11 – GMP Chromatography System with CIP Skid New – unused – in original packaging Manufacturer: Brinox Model: LEP 11 Version: PP6713 with CIP System CS6713 Condition: New – in original packaging – never installed Description Offered is a pharmaceutical chromatography system LEP 11, consisting of the chromatography panel PP6713 and the corresponding CIP skid CS6713. The system is completely new, unused, and remains in the manufacturer’s original condition. The unit was designed for GMP-grade protein purification as part of C1-INH chromatography. System Features Cleanroom panel for wall integration Transfer lines to sieve-bottom tanks Precipitation vessel connection Gel waste disposal line Complete utility/process piping Technical Specifications Design pressure: –0.9 to +6 bar Design temperature: +2 to +95 °C Electropolished surfaces Ra ≤ 0.8 µm Material: 1.4435 stainless steel Fully drainable GMP-compliant design CIP System CS6713 Stainless steel frame construction Centrifugal pump Shell-and-tube heat exchanger Ijdsyl Rnnjpfx An Iobc Conductivity, pressure, and temperature monitoring Adjustable CIP supply flow The system is brand new and has never been in operation.

Condition: used, Year of construction: 2000, Insulated, steam-heated V4A stainless steel tanks, most recently used as CIP cleaning tanks. Ibsdszty H Iopfx An Ijc Additional title: vertical, conical stainless steel tanks Capacity: 3000 l/tank Width: 1,55 m Height: 3 m Weight: 600 kg Material: V4A stainless steel Position: vertical, standing on feet Base construction: cylindrical tanks with dished top and conical bottom Features: 2 stainless steel tanks 30 hl each, insulated, heatable by steam

Condition: used, Year of construction: 1997, Automatic in-line filling machine: Model: Bosch FLK 6040 CIP Year : 1997 Power: 5 kW Speed: 30-40 bottles/min Conveyor width: 8 cm Transporting bottles from right to left Linear dosing system with 6 stainless steel pistons Filling point: 6 heads Plunger filling head: yes Volume: from 15 to 500 ml Pistons replaced in 2012. Filling accuracy: +/- 0.5% depending on the product Product: liquid/semi-liquid for bottles, flasks, cans Ibsdpoyfw H Rofx An Ijc Formats : ⌀ 41 to 115 mm Hauteur max : 320 mm Minimum internal diameter of opening: 5 mm Closed hopper Clean-in-place (CIP) module Maximum temperature: 60°C Dimension : 400 x 150 x 320 cm Weight : 2100 kg Several formats and spare parts available.   Capping/screwing machine: Model : VLM 7010 Year : 1997 Power : 10 kW Transporting bottles by conveyor belt. Direction from right to left. Screw, pressure or push-fit sealing system Capacity : 60 units / min Bottle dimensions: Width: 16 to 90 mm Length: 16 to 135 mm Height: 40 to 280 mm Diameter: 16 to 100 mm Cap dimensions: screw cap: Diameter : 16 à 60 mm Height : 13 à 50 mm Width: 16 to 60 mm Length: 16 to 60 mm pressure cap: Diameter : 16 à 60 mm Height : 13 à 50 mm Width: 16 to 60 mm Length : 16 à 70 mm Machine dimensions: 400 x 130 x 200 cm (+ electrical cabinet 160 x 50 x 170 cm) Weight : 2050 kg  

Condition: used, "Cleaning-in-place" system consisting of 4 vertical stainless steel tanks for acid, fresh water, alkaline solution, and rinsing water. Most recently used for cleaning a filter room. The system is heated via a heat exchanger using steam. The feed pump circulates the media through the process. Machine (additional information): 4-tank system with feed pump and heat exchanger. Material: Stainless steel Iodpfx Aozi Ampsn Iebc Location/Position: Tanks standing on pipe supports. Basic design: Cylindrical, open tanks with hinged lids. Equipment: 4 x CIP tanks; feed pump; heat exchanger; control cabinet with digital control panel; various pipes and valves.

Condition: used, Year of construction: 2014, Overview Complete 10 hl craft brewery around an Eco Brew Tech 10-20 HL steam-heated two-vessel brewhouse from 2014. One package from milling to bottling: malt mill, brewhouse with wort cooling and oxygenation, hot and cold water tanks, steam generator, three 20 hl unitanks, filtration, an atmospheric filler-capper monoblock, a self-adhesive labeller and a microchiller. 10 hl of cast wort per brew at 12.5 °P, up to 4 brews in 24 hours. Ibedpoz Sk Aqofx An Isc Technical data - Brew length: 10 hl cast wort at 12.5 °P; 20 hl in 12 hours, up to 4 x 10 hl per 24 hours - Brewhouse: 2 vessels, AISI 304, steam-heated, PLC with touchscreen and recipe memory - Fermentation: 3 x 20 hl unitanks, AISI 304, 0.49 bar - Bottling: 800-1,000 bottles/h, crown cap - Year: 2014 (microchiller 2018) Scope of Delivery - Malt mill | Robix | ROPPI-1100 | two fluted rollers, adjustable and lockable gap, protective magnets, 1,100 kg/h, 4.8 kW, 400 V / 50 Hz - Brewhouse | Eco Brew Tech | 10-20 HL | mash/lauter tun 1,557 L gross with false bottom, grant, sparging and 1.1 kW bidirectional rake with variable speed; kettle/whirlpool 1,890 L gross with tangential inlet and bottom steam jacket; rock wool insulation, platform and stairs | 2014 - Wort pumps | 2 sanitary pumps for hot and cold wort, 2 kW and 3 kW - Water mixing station | hot and mains water, flow meter and in-line thermometer - Plate heat exchanger | AISI 316 plates, NBR gaskets, wort cooling with hot-water recovery - Wort oxygenation | in-line, porous stone, flow control valve, outlet thermometer - Hot water tank | Eco Brew Tech | HWT | 20 hl working (2,869 L gross), steam jacket, PT100 thermostat, 0.75 kW pump 80 L/min, 24 L expansion vessel | 2014 - Cold water tank | Eco Brew Tech | CWT | 20 hl working (2,869 L gross), glycol jacket, PT100 thermostat, 0.75 kW pump 80 L/min | 2014 - Steam generator | Thermindus | GV INSIEME | 150 kg steam/h, diesel burner, feed-water unit and boiler control panel | 2014 - Unitanks, 3 units | Eco Brew Tech | 20 hl working (2,731 L gross) each, AISI 304, 0.49 bar, 2 independent cooling jackets (side and cone), PT100, pressure gauge, safety valve, CIP spray ball | 2014 - Mixing tank | Eco Brew Tech | 2,200 L, AISI 304 | 2014 - Mobile pump on trolley | 1.5 kW, 200 L/min at approx. 15 m, AISI 316 pump, AISI 304 trolley, for CIP and beer transfer - Cartridge filter | AISI 304 housing, up to 2,000 L/h, cartridges not included - Process pump | EP MINI | 0.37 kW, 3/4" connection - Filler-capper monoblock | Idrotecnica | I8C | atmospheric filling, crown capping, 800-1,000 bottles/h | 2014 - Self-adhesive labeller | STS | S2/Z | automatic, 1,000 bottles/h, batch coder | 2014 - Microchiller | Keyter | KWF2009 | process cooling | 2018 Condition Used, still installed. Inspection on site is possible. Availability Immediately. Location: Spain.

Condition: used, Cleaning-in-place system, completely mounted on a frame. The system consists of the following components: - 2 rectangular CIP tanks with hinged lids, each equipped with a heating coil. Gross capacity approx. 750 l and 500 l respectively. - Self-priming centrifugal pump (INOXPA, 2001, 3 kW, 15 m³/h) as CIP feed pump. - Control cabinet in housing with button panel - Various pipes, valves, actuators and sensors Additional title: Cleaning system with 2 containers Volume container 1 appr.: 750 l Volume container 2 appr.: 500 l Ibsdpsztywmofx An Ioc Length: 2,20 m Width: 1,60 m Height: 1,60 m Material: CIP containers from stainless steel Base construction: mounted on frame Features: 2 CIP containers, each with heating coil; CIP feed pump; various piping; actuators; sensors; control cabinet; frame

Condition: used, Year of construction: 2009, upright, insulated stainless steel CIP tank with 6 containers arranged one above the other. The total capacity is 500 hl. Additional title: vertical stainless steel tank Contents 2 zones each: 10000 l Content 1 zone: 14000 l Width: 3000 mm Height: 12087 mm Material: stainless steel Ibjdpfxjxwxy Ue An Iec Position: free standing Base construction: 6 cylindrical tanks arranged one above the other with conical bottoms, Features: ladders and platforms with guard rails, manhole in the covers, shell insulation with welded stainless steel cladding, collecting overflow,

Year of construction: 2003, condition: excellent (used), Ilpra fillseal 4000CIP rotating cup-filling machine Rotating cup-filling machine - Up to 4,000 cups per hour - Two heads - 75 mm - Two types of filling heads - CIP cleanable - Complete manual and drawing documentation available - Some spare parts included - Year of manufacture: 2003 - Service and spare parts available from Ilpra Process steps: 1. Cup picking Ibodpoy I A Hpofx An Ijc 2. Filling 3. Sealing 4. Seal stamping/heating 5. Date stamping 6. Cup discharge to conveyor belt Excellent working condition. Videos with operating cups available.

Condition: used, functionality: fully functional, power: 36.5 kW (49.63 HP), first registration: 10/2013, fuel type: diesel, fuel: diesel, operating hours: 3,574 h, Equipment: air conditioning, all wheel drive, car registration, differential lock, hydraulics, * 4-cylinder, 4-stroke diesel engine with 36.5 kW / 50 hp or 49.2 kW / 67 hp, water-cooled * 2,600 cc displacement * Permanent all-wheel drive via hydraulic wheel motors on each wheel Special paint finish RAL 9010 white Work package 1 Front lift including tow hitch CAT II / CAT I with passive tilt adjustment Rotating beacon Stabilizer bar Hydraulic set, flow divider 1 Flow divider, first circuit adjustable from 0–25 l/min with line set to the front and rear Return line to the front and rear Hydraulic set, flow divider 2 with tandem pump Flow divider, second circuit with tandem pump adjustable from 40–60 l/min line set to the front and rear return line to the front and rear leakage oil line to the front and rear Hydraulic tilting mechanism for superstructure frame Hydraulic set 1 consisting of: - 2 double-acting control valves with floating position - 4 quick couplings at the front - 2 quick couplings at the rear, connected via a T-piece with quick couplings at the front - Small joystick including floating position for front lift TIRE 31x10.5 R15 Overall outer width 120 cm, narrow, 140 cm wide when mounted Fender kit, narrow Multifunction joystick Flat roof Ibjdpfxjzd Rius An Iec Cabin mounted in the center Hydr. tilting mechanism for cabin Holder flatbed, complete with substructure Internal dimensions approx. 1250 x 1060 x 400 mm Flow divider automatic Rotating beacon, LED Work light, LED Red/white warning markings The following winter attachments can be purchased separately: Roller spreader with hydraulic drive RA-C 06/42, 940 mm tipping flatbed, combined (NEW), for sand, gravel, possibly salt rear light design as on the vehicle paint RAL 2011 roller width: approx. 940 mm spreading width: approx. 1250 mm weight (empty): approx. 220 kg Spreading rate regulation adjustable via rotary knob in the cab proportional oil flow regulator, complete with cable and plug mounted on the spreader Semi-automatic, speed-dependent only applies in conjunction with item 2 deactivation of the roller when the vehicle stops Cable sets Control for spreader fill level Hummel front sweeper 145 cm working width hydraulic central drive – serial no. 980 Hummel MS-M1450HO front sweeper front lift CAT 1 central drive hydraulically via 3/4" chain dirt brush roller support feet 1 adjustable heavy-duty wheel in the center horizontal adjustment hydraulic pivoting hoses and couplings Subject to changes, printing errors, mistakes and prior sale. All information is provided without guarantee. The sale is made with the exclusion of any guarantee or warranty.

Condition: used, CIP system comprising a total of 7 tanks, of which: - 1 tank with a capacity of 60 hl, used as a buffer water tank - 5 tanks, each with a capacity of 30 hl (built in 1992), for acid, buffer water, Desi and 2 x lye - 1 tank with a capacity of 20 hl (built in 1992) for fresh water Other system components: - 2 centrifugal pumps - Heat exchanger - Conductivity measurement - Various pipework and valves Additional title: 7-tank CIP system with pumps and heat exchanger Volume stacked water tank: 6000 l Volume 5 x tanks for cleaning solutions: 3000 l Ibsdpfezi Anajx An Ioc Volume fresh water tank: 2000 l Material: stainless steel Position: vertical vessels each on 3 feet Features: 7 x CIP tanks (comprising 1 x 60 hl, 5 x 30 hl and 1 x 20 hl); 2 x centrifugal pumps; heat exchanger; conductivity measurement; various pipework and valves

Condition: good (used), functionality: fully functional, For sale is a robust and reliable Pfeiffer Piccolo oscillating circular saw, designed for professional use in carpentry shops, timber construction companies, and woodworking businesses. The machine is equipped with a total of approximately 4,000 mm long roller table, pneumatic workpiece clamping, and two-hand operation. The cutting feed rate is continuously adjustable. Technical data / Features: Manufacturer: Pfeiffer Model: Piccolo Machine type: Oscillating circular saw / Miter saw Cutting height: max. approx. 125 mm Total roller table length: approx. 4,000 mm Pneumatic workpiece clamping device Two-hand operation Continuously adjustable cutting feed rate Ibodpfxjzx U E As An Isc Length stop Roller track for workpiece feed and removal Dust extraction connection Separate control panel with emergency stop Robust industrial design The machine is in used condition, as shown in the photos. Transport is possible for an additional charge! The machine is currently still at the customer's premises. The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and features may vary. Errors, prior sales, and changes are subject to alteration. All information is without guarantee.

Condition: excellent (used), Year of construction: 2017, operating hours: 400 h, functionality: fully functional, Equipment: compressor, documentation/manual, High-end (!) Austrian Brewery, newly purchased in 2017 directly from the owner. It has been used less than 100 times ever since because it is positioned at a remote location away from the main brewery. It has been maintained very well, ready for inspection. Ideally for brew-pubs. It is 5HL machine but can do 2 brews simultaneously, so effectively it can be considered a 10HL machine. It has 4 Uni-tanks of 12 HL and all the necessary equipment, such as cooling, to make it a turn-key brew installation of a premium quality. Also all necessary hoses plus a mobile pump for CIP of the Unitanks, etc. Original documentation available, in German, showing that all equipment was purchased at the Labu factory. This whole set would currently cost approx. 240.000€ (ex VAT, ex works). Delivery possible per direct after dismantling. We could provide a proper instruction / training by one of our senior brewers. Current asking price is approx. 135K€, ex VAT ex work but including instruction. The brewery is located in the Amsterdam area, the Netherlands Ibodpfezz Rlwsx An Ijc

Condition: used, CIP system with 5 tanks (one of which is insulated). Additional components: - Each tank is fitted with sampling taps, a ladder frame, a manhole on the top, pneumatic valves and level probes - Shell-and-tube heat exchanger for heating water, which is then fed into the CIP tanks - 3 x dosing pumps (Grundfos) - CIP feed pump (Hilge) - In-line measurement of temperature and conductivity - Pipe panels as well as various pipes, valves and fittings Additional title: Cleaning system with 5 vessels Material: vessels from stainless steel Position: vessels standing on 3 feet each Base construction: flatconical vessels Features: 5 CIP tanks (1 of which is insulated); feed pump; 3 chemical dosing pumps; tube bundle heat exchanger; level probes; temperature measurement; conductivity measurement; pneumatic butterfly valves; pipe panels various other valves, pipework and fittings Iedpfoy Tizwex An Iobc

Condition: new, ProMinent DGMA330T010 Flow sensor, serial number: 2011115558, unused, in open original packaging, 100% functional, scope of delivery as shown in the photos. Ibodozp Tphjpfx An Ijc

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, total height: 2,100 mm, total width: 1,100 mm, total length: 1,300 mm, overall weight: 800 kg, REF: MM5446 Isdpfjx Dbkcox An Isbc Borelli Group S.r.L. inline rotary filling machine suitable for filling glass bottles. This is a standard 10-head rotary filler with complete CIP kit for cleaning, including dummy bottles and washing spray system. Also supplied with filler in-feed scroll and bottle handling parts for Bordeaux glass bottles. Technical specification: ✅ Manufacturer - Borelli Group S.r.L ✅ Model - RMC10. ✅ Date of manufacture - 2018. ✅ Speed - up to 1500 bottles/hour (for 750ml bottles). ✅ Throughput - 1300 litres/hour. ✅ Filling system - Pure gravity. ✅ Speed variator - Inverter. ✅ Voltage - 415 V / 50 hz / 3 phase. ✅ Pneumatic supply - 3-6 bar.

Condition: used, completely stainless steel Suitable for direct steam injection (4 points at the bottom of the conical base) Operating temperature 125°C Operating pressure 2.5 bar Ibjdjz S Hvlspfx An Ijc Insulated (bottom + walls) Manhole DN500 Internal diameter 2,000 mm Boiler height with closed lid ± 3.000 mm Boiler height with open lid ± 4.150 mm Suitable for CIP Total volume of contents 4,840L Total dimensions: (L x W x H): ± 3.000 x 2.400 x 3.200 mm Hydraulically operated lid + Hydraulic unit in good condition electric control box not included

Year of construction: 2023, condition: used, functionality: fully functional, For sale: 300-liter vacuum concentrator – in almost new condition! Hagyo Vacuum Universal 300, an industrial vacuum concentrator manufactured in 2023, used only 10-12 times. Regularly serviced and ready for immediate operation. Ijdpfx Asz Iwxnsn Ijbc Vacuum concentration is an extremely gentle process: the water evaporates at a temperature below 50 °C, thus preserving the color, aroma, and nutritional values of the raw material, and the final product becomes much more enjoyable. Ideal for: concentrating pressed fruit juices to a jam-like consistency with a high refractive index, at low temperatures, without damaging the fiber and aroma characteristics, concentrating vegetable juices to a jam-like consistency (e.g., pumpkin, carrot, beetroot), extracting spices and herbs at low temperatures. Unique modifications made to this machine (not found on other machines in the series): high-performance defoaming unit, a 300-liter collection tank with a cleaning opening instead of the standard 100-liter tank, so the machine does not need to be stopped for emptying, new silicone elements on the mixing blade. Key features: 300-liter filling volume stainless steel construction, double-walled, with heating jacket mixing and vacuum system with automatic temperature control stainless steel final cooler (condenser) built-in CIP cleaning system, each unit can be cleaned separately evaporation capacity: 30 l/hour (at 50 °C) electrical connection: 400 V, 38 kW (3×63 A) overall dimensions: 2000 × 1550 × 2550 mm Hungarian-language operating manual and machine documentation included Price: 12,000,000 HUF Viewings can be arranged in Szenna (Somogy County) by prior appointment. Reason for sale: change of business profile. Write a message, and I will send you more details!

Condition: new, ProMinent beta/4 dosing pump BT4B1601PPE2000UA00000, serial number: 2021381345 - cable length: 1.50 m, unused, 100% functional, scope of delivery as shown in the photos. Ibsdpfjzg Sb Rsx An Isc

Condition: repair required (used), functionality: limited functionality, power: 49 kW (66.62 HP), first registration: 07/2011, fuel type: diesel, color: orange, fuel: diesel, Year of construction: 2011, Equipment: air conditioning, all wheel drive, car registration, cruise control, differential lock, hydraulics, Holder C 270 Drive System 4-cylinder, 4-stroke Kubota diesel engine, Type 2607, 49.2 kW / 67 hp in the C 270 Hydrostatic all-wheel drive via four equal-sized wheels Infinitely variable speed selection with a total of four pre-selectable gear stages Hydraulic wheel load compensation (combined independently and dependently) Mechanical differential lock, front and rear, simultaneously switchable electrohydraulically Hydraulic service brake and electric parking brake as a drum brake Suspended front and rear axles Cab including heater Heat-protective glazing and sliding side windows Multi-function display (tachometer, operating hour meter, speed indicator, remote thermometer for engine and hydraulic oil, fuel level indicator) Mechanically adjustable steering column 3 storage compartments, sunshade film, interior cab light with door contact switch Hydraulics Multi-function arm console with driving program and differential lock switch Hydrostatic articulated steering with 2 double-acting steering cylinders Additional Equipment Mounting frame for tool-free changing of platforms and attachments Locking rail at the front for adjusting the top link Electrical system: AC generator 12 V / 90 A – 1080 W Battery 12 V / 88 Ah Battery disconnect switch Radio preparation: wiring harness, antenna, speaker grilles Lighting system according to StVZO (German Road Traffic Licensing Regulations) 7-pin socket at the rear Path signal prepared via Super-Seal plug connector Biodegradable hydraulic oil Stainless steel support pad Standard paint color: Orange RAL 2004 Front linkage Front linkage incl. safety hook CAT IN / CAT I with passive tilt adjustment Rotating beacon Locking block Mechanical PTO shaft, front 1000 rpm at the front Hydraulic flow divider 1 Flow divider, 1st circuit adjustable from 0–25 l/min with line set to the front and rear Return line at the front and rear Hydraulic kit, attachment adjustment pump Attachment adjustment pump 0–80 l/min, variable Line set to the front and rear Return line at the front and rear Leakage oil line at the front and rear Ijdpfjzfbu Rsx An Isbc Hydraulic tilting device for superstructure arms Hydraulic set 2 3 double-acting control valves 2 with floating position 4 quick-release couplings 2 quick-release couplings at the rear, angled connected via a T-piece with quick-release couplings at the front Active hydraulic tilt adjustment 1 joystick incl. direction of travel switch and speed control Electro-hydraulic attachment relief Comfort package Driver's seat with air suspension, armrest 2 work lights at the front 2 work lights at the rear WITH THE FOLLOWING DAMAGES: - Articulated joint worn out - Age-related and usage-related wear on the vehicle - Rust damage corresponding to the age Changes, typing errors, mistakes and prior sale are subject to change. All information is provided without guarantee. The sale is made with the exclusion of any warranty or guarantee.

Condition: not inspected (used), Year of construction: 2012, operating hours: 9,910 h, functionality: unexamined, working height: 45 mm, working length: 2,600 mm, TECHNICAL DETAILS Max. working length: 2,600 mm Max. working height: 45 mm MACHINE DETAILS Total connected load: 6.5 kW Operating hours: 9,910 h The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods prior to collection and assumes responsibility for the installation, securing, and operation of the machine at the destination. Iedpfx Aoyq Ez Hjn Ijbc External reference: 6063

Condition: like new (used), Year of construction: 2014, Pilot Crystallizer Mini pilot plant for margarine, shortening, puff pastry, and other products that require mixing and cooling. A complete mini laboratory plant for research and development. Including: 2 tanks, 5 liters each, for water and fat-phase ingredients. 1 buffer tank, 20 liters. High-pressure pump, up to 75 bar. 3 crystallization cylinders, named A1 + A2 + A3. 2 pin mixers, named C75 + C150. 1 rework melter, C heat. 1 resting tube, named B200. The above-mentioned units can be positioned in any possible way, for example, A1-A2-B or A1-C75-A2-A3-C150, by switching pre-assembled high-pressure piping. The crystallizer cylinders, which are scraped surface heat exchangers (SSHE), are cooled by direct evaporation using an integrated Freon cooling compressor. The tubes have a diameter of 30 mm and a length of 80 mm; the rotor is equipped with 2 scrapers, providing a surface area of 0.113 m² per tube. A temperature sensor is located after each unit. The capacity is variably adjustable, up to 50 liters per hour. Cooling system manufactured by GEA, with an integrated compressor and water-cooled condenser. There are 3 independent cooling circuits (for each crystallizer). The tanks are double-jacketed, with an agitator and temperature sensors. The entire unit is built on a frame and is mobile. The controls are integrated and tested using an HMI touch screen control panel with ‘SpecView Inc.’ software, and the controllers are from RKC systems. The unit can be controlled from the HMI by simply starting and stopping the individual components, but a recipe can also be created for controlling the motor speed, temperatures, and valves. All motors are equipped with frequency converters, Siemens micromasters and 1 x Danfoss. Ibjdpfx Anez Iy Hzo Isc An integrated CIP system, with CIP circulation and a CIP concentrate hose dosing pump.

Condition: used, CIP system comprising three 20 hl stainless steel tanks for acid, lye and caustic soda. The two lye tanks are thermally insulated. Ibodpfx Aszizfdsn Ijc Additional title: 3-tank system for cleaning the brewhouse Vessel volume each: 2000 l Length: 5,8 m Material: vessels from stainless steel Position: vessels standing on 3 feet each Features: 3 CIP tanks (2 of which are insulated); feed pump; chemical dosing system; 2 filter cartridges in the pipeline; conductivity measurement; pneumatic valves; control cabinet; pipework

Condition: good (used), functionality: fully functional, Year of construction: 2019, operating hours: 880 h, power: 55.16 kW (75.00 HP), fuel type: diesel, gearing type: hydrostat, fuel: diesel, Equipment: all wheel drive, hydraulics, MULTIHOG CX-75 Municipal Tool Carrier This MULTIHOG CX-75 was first commissioned in 2019, has only 880 total operating hours according to the meter, and is in a well-maintained overall condition with normal signs of use and wear. The sale is carried out as a used machine, with returns, warranty, and guarantee excluded. - Net price: €28,900 // Gross price: €34,391 - Inspection / test drive possible by appointment - Nationwide shipping can be arranged; shipping costs depend on distance! - We are happy to provide you with an attractive leasing or financing offer through our leasing partner! Ibsdpfx Aeyh Izujn Ijc