Used Puller for sale (185)

Condition: new, Puller 45-4, Spanning diameter 200 mm, Spanning width 250 mm, 9.5 t, KUKKO · Three-arm design Ksdps Ab A Etofx Ahisnc · Equipped with force-multiplied, self-centering puller hooks · Particularly suitable for removing stuck gears, sprockets, ball bearings, pulleys, etc. Application: For removing particularly stuck gears, sprockets, ball bearings, pulleys, etc. · Other technical specifications: Weight: 4.18 kg Spanning depth: max. 200 mm Spanning width: max. 250 mm

Condition: new, Puller 12-3, clamping range 165mm, span 200mm, 10 t, KUKKO · Three-arm design · With pre-adjustable clamping range · Robust puller with excellent clamping action for removing ball bearings, gears, pulleys, etc. Ksdps Ab Iv Rjfx Ahisnc · With slim puller hooks for hard-to-reach areas · The required width is adjusted using the wrench · Slipping of the hooks from the parts to be removed is impossible Application: for removing particularly stubborn ball bearings, gears, pulleys and similar parts · Other technical specifications: Weight: 3.5 kg Clamping depth: max. 165 mm Span: 200 mm

Condition: good (used), Steady rests and puller for a WMW cylindrical grinding machine with a center height of 175 mm 1 x fixed steady rest, inner diameter 220 mm 3 x fixed steady rests 1 x puller with diamond dresser and fine adjustment Only available as a package deal! Knsdpfx Ahswg Rx Doisc Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: new, Puller 110-4, clamping depth 250 mm, clamping width 350 mm, KUKKO · Two-arm design · Pulling hook is continuously straight and consistently slim Ksdj Ab Aydspfx Ahionc · Reversible hook for both external and internal pulling operations · Hooks are secured with a pin to prevent them from falling out; the pin is released by pressing a button, allowing the hooks to be repositioned for internal or external pulling by switching the arms; the puller can also be used as an internal puller · Other technical features: Weight: 6.21 kg Clamping depth: max. 250 mm Clamping width: max. 350 mm

Condition: good (used), overall weight: 10,364 kg, Year of construction: 2019, 2019 GENERAL BROACH 10-30 GBTU VERTICAL TABLE UP BROACH Equipped with: Retriever Shuttle Table Chip Conveyor Auto Load Grayco Lube AB Panelview Coolant Tank & Pump Specifications: Capacity: 10 Ton Stroke: 30" Table Up 1″ Puller / Retriever Kodpfx Asrtrzajhisnc Hydraulic Power Unit Chip Conveyor Machine Dimensions (approx.): 165″ x 48″ x 60″ Machine Weight Total (approx.): 22,800 lbs. Machine Column (approx.) : 13,000 lbs. Base w/ Chip Conveyor (approx.): 4,700 lbs. Electrical Panel (approx.): 600 lbs. Hydraulic Power Unit (approx.): 4,500 lbs.

Condition: new, Pulling device 18-3, nominal size 3, clamping width 80-300 mm, KUKKO · For connection to the separating device, the pull bolts are screwed into the threaded holes of the separating jaws. · Other technical specifications: Weight: 6.38 kg Nominal size: 3 Knodpfxs Ab Izao Ahioc Suitable separating device: Art.-No. 41 57 480 003, 40, 41 57 490 013 Clamping width: 80 - 300 mm Pull bolt length: 300 mm

Condition: new, Puller 20-20+ Clamping distance 150 mm Clamping width 200 mm 6 t KUKKO · Two-arm design Kjdpj Ab Aywofx Ahienc · With quick adjustment · Made of high-quality tool steel · With hand-operated knurled wheel for quick release and adjustment of the puller hooks without a wrench · Optimal adaptation of the spindle to the shaft due to a two-sided spindle tip (ball and point) Application: universally applicable, for removing ball bearings, bearings, gears, etc. · Can be used as an external and internal puller by rotating the puller hooks · Also suitable for removing asymmetrical workpieces · Other technical features: Weight: 3.32 kg · Material: High-quality tool steel Material: Special steel Clamping distance: max. 200 mm Clamping depth: max. 150 mm

Condition: new, Puller 20-10+ with tensioning screw, 100 mm tensioning depth, 120 mm tensioning width, 4.5 t, KUKKO · Two-arm design · With quick adjustment · Made of high-quality tool steel · With a knurled handwheel for quick loosening and adjustment of the puller hook without a wrench · Optimal adaptation of the spindle to the shaft through a 2-sided spindle tip (ball and point) Application: Universally applicable, for removing ball bearings, bearings, gears, etc. · Can be used as an external and internal puller by reversing the puller hooks · Also suitable for removing asymmetrical workpieces · Other technical features: Weight: 1.44 kg · Material: High-quality tool steel Material: Special steel Knjdo Ab Aykepfx Ahioc Tensioning depth: max. 100 mm Tensioning width: max. 120 mm

Condition: new, Puller 20-2+ with tensioning bolt, 150 mm clamping depth, 160 mm clamping width, 6 t, KUKKO · Two-arm design · With quick adjustment · Made of high-quality tool steel · With a knurled handwheel for quick release and adjustment of the puller hooks without a wrench · Optimal adjustment of the spindle to the shaft through a two-sided spindle tip (ball and point) Application: universally applicable, for removing ball bearings, bearings, gears, etc. · Can be used as an internal and external puller by reversing the puller hooks · Also suitable for removing asymmetrical workpieces · Other technical features: Weight: 3.05 kg · Material: High-quality tool steel Kodpfx Aj Ab Ayqjhionc Clamping depth: max. 150 mm Material: Special steel Clamping width: max. 160 mm

Condition: new, Puller 30-2, clamping range 150 mm, clamping width 160 mm, 7 tons, KUKKO · Three-arm design · Made of special steel · Robust design · Three-arm pullers guarantee a particularly secure grip on the parts to be removed due to the even load distribution and enable centric pulling · The puller can also be used as an internal puller by repositioning the puller arms. Knodps Ab Iwnefx Ahisc Application: for removing ball bearings, bearings, gears, etc. · Can be used as an internal and external puller by rotating the puller arms · Also suitable for removing asymmetrical workpieces · Other technical specifications: Weight: 3.82 kg · Material: Special steel Clamping range: 160 mm Material: Special steel Clamping depth: max. 150 mm

Condition: new, Puller 30-1, clamping depth 100 mm, clamping width 90 mm, 6 tons, KUKKO · Three-arm design · Made of special steel Knjdpfxo Ab Iwbo Ahioc · Robust construction · Three-arm pullers guarantee a particularly secure grip on the parts to be removed due to the even load distribution and ensure centric pulling · The puller can also be used as an internal puller by repositioning the pulling hooks. Application: for removing ball bearings, bearings, gears, etc. · Can be used as an internal and external puller by rotating the pulling hooks · Also suitable for removing asymmetrical workpieces · Other technical features: Weight: 1.53 kg · Material: Special steel Clamping depth: max. 100 mm Clamping width: 90 mm Material: Special steel

Condition: new, Puller 30-10, clamping range 100 mm, clamping width 120 mm, 6 t, KUKKO · Three-arm design · Made of special steel · Robust construction · Three-arm pullers guarantee a particularly secure grip on the parts to be removed and a centric removal due to the even load distribution · The puller can also be used as an internal puller by repositioning the pulling hooks Application: for removing ball bearings, bearings, gears, etc. · Can be used as an internal and external puller by rotating the pulling hooks · Also suitable for removing asymmetrical workpieces · Other technical features: Weight: 1.59 kg · Material: Special steel Knods Ab Iwhepfx Ahiec Material: Special steel Clamping depth: max. 100 mm Clamping width: 120 mm

Condition: new, Puller 20-1, clamping depth 100 mm, clamping width 90 mm, 4.5 tons, KUKKO · Two-arm design · With sliding puller hooks that remain parallel at all times · Made of special steel · With a robust spindle for high pulling force and a crossbeam with high bending strength · Puller hooks with large contact surfaces for gentle pulling · Optimal adaptation of the spindle to the shaft thanks to the two-sided spindle tip (ball and point); by repositioning the arms, the puller can also be used as an internal puller Application: universally applicable, for removing ball bearings, bearings, gears, etc. · Can be used as an internal and external puller by rotating the puller hooks · Also suitable for removing asymmetrical workpieces Kedj Ab Aznopfx Ahienc · Further technical features: weight: 1.31 kg · Material: special steel Clamping depth: max. 100 mm Material: special steel Clamping width: max. 90 mm

Condition: new, Puller 20-10, clamping depth 100 mm, clamping width 120 mm, 4.5 t, KUKKO · Two-arm design · With sliding puller hooks that remain parallel · Made of special steel · With a robust spindle for high pulling force and a crossbeam with high bending strength · Puller hooks with large contact surfaces for gentle removal · Optimal adaptation of the spindle to the shaft via a two-sided spindle tip (ball and point); by repositioning the arms, the puller can also be used as an internal puller. Application: universally applicable, for removing ball bearings, bearings, gears, etc. · Can be used as an internal and external puller by inverting the puller hooks · Also suitable for removing asymmetrical workpieces · Other technical features: weight: 1.42 kg · Material: special steel Kodo Ab Azuopfx Ahienc Clamping depth: max. 100 mm Material: special steel Clamping width: max. 120 mm

Condition: new, Puller 20-20, clamping depth 150 mm, clamping width 200 mm, 6 tons, KUKKO · Two-arm design · With sliding puller hooks that remain parallel Knede Ab Az Uepfx Ahioc · Made of special steel · With a robust spindle for high clamping force and a crossbeam with high bending strength · Puller hooks with large contact surfaces for gentle removal · Optimal adaptation of the spindle to the shaft through a two-sided spindle tip (ball and point); by repositioning the arms, the puller can also be used as an internal puller. Application: universally applicable for removing ball bearings, bearings, gears, etc. · Can be used as an internal and external puller by reversing the puller hooks · Also suitable for removing asymmetrical workpieces · Other technical features: weight: 3.22 kg · Material: special steel Clamping depth: max. 150 mm Clamping width: max. 200 mm Material: special steel

Condition: new, Puller 20-2, Spanning range 150 mm, Spanning width 160 mm, 6 t, KUKKO · Two-arm design · With sliding, always parallel puller hooks · Special steel · With a robust spindle for high clamping force and a crossbar with high bending strength · Puller hooks with large contact surfaces for gentle removal · Optimal adaptation of the spindle to the shaft by means of a two-sided spindle tip (ball and point); by repositioning the arms, the puller can also be used as an internal puller. Application: universally applicable, for removing ball bearings, bearings, gears, etc. · Can be used as an external and internal puller by rotating the puller hooks · Also suitable for removing asymmetrical workpieces · Other technical features: Weight: 3.01 kg · Material: Special steel Ksdpfx Ahe Ab Azzsionc Spanning range: max. 160 mm Material: Special steel Spanning depth: max. 150 mm

Year of construction: 2014, condition: excellent (used), ANKELE 2 BAND CATERPILLAR BAP 375-70 1A Knodpfx Ahsu Skmwsiec

Condition: good (used), Year of construction: 2008, Two identical machines in stock Brand: GRAEWE GMBH Type of machine: Winder Model: EW 2700 Year of manufacturing: 2008 Kedoy N Sx Dopfx Ahienc Weight (kg): 2030 Voltage (V): 400V/50Hz

Condition: new, Internal puller 21-6 for bores D. 36-46 mm, KUKKO · For removing ball bearings, ball bearing outer rings, and bushings · Made of special steel · Even bearings that are seated very tightly against the rear wall are securely gripped and quickly tightened due to the excellent clamping action · Application: for removing ball bearings, ball bearing outer rings, and bushings that are closely fitted · Other technical features: Weight: 0.68 kg · Material: Special steel Kjdpfx Ahs Ab A E Hoisnc Material: Special steel for bores Ø: 36 - 46 mm

Condition: new, Puller 44-5, Spanning range 250 mm, Spanning width 300 mm, 9.5 t, KUKKO · Two-arm design · Equipped with force-multiplied, self-centering puller hooks · Particularly suitable for removing stuck gears, sprockets, ball bearings, pulleys, etc. · Optimal adaptation of the spindle to the shaft through a 2-sided spindle tip (ball and point) Application: for removing stuck gears, sprockets, ball bearings, pulleys, etc. · Further technical specifications: Weight: 4.18 kg Spanning depth: max. 250 mm Knedpo Ab A A Ejfx Ahijc Spanning width: max. 300 mm

Condition: new, Puller with claw feet 14-2, clamping range 125mm, clamping width 10-140mm, 3.5 t, KUKKO Knjdpfo Ab A D Nex Ahiec · Adjustable · With self-locking retaining pins for individual adjustment of the clamping range and clamping depth · Self-clamping · Easy to use. Application: for removing sprockets, bearings and similar parts in confined spaces. · Other technical specifications: Weight: 1.06 kg Clamping depth: max. 125 mm Clamping range: min. 10 mm, max. 140 mm

Condition: new, Puller tool 204-3, clamping width 140 mm, clamping range 150 mm, lateral clamping jaw, KUKKO Knedpfx Ahj Ab I Akeiec · With lateral clamping jaw · Indispensable for removing flush-fitting ball bearings, gears, sprockets, steering levers and similar parts · The clamping jaw presses the puller hooks firmly against the part to be removed · Other technical specifications: weight: 3.16 kg · Design: lateral clamping jaw Clamping depth: max. 140 mm Clamping range: max. 150 mm

Condition: new, Puller 44-4, clamping range 200 mm, arm span 250 mm, 7 tons, KUKKO · Two-arm design · Equipped with force-amplified, self-centering puller hooks Kedpfj Ab A Axsx Ahijnc · Particularly suitable for removing stuck gears, sprockets, ball bearings, pulleys, etc. · Optimal adaptation of the spindle to the shaft due to the two-sided spindle tip (ball and point) Application: for removing stuck gears, sprockets, ball bearings, pulleys, etc. · Other technical features: Weight: 3.28 kg Clamping depth: max. 200 mm Arm span: max. 250 mm

Condition: new, Puller 45-3, clamping range 160 mm, clamping width 160 mm, 8 tons, KUKKO · Three-arm design Kedpfxj Ab A Ems Ahienc · Equipped with force-multiplied, self-centering puller hooks · Particularly suitable for removing tightly fitted gears, sprockets, ball bearings, pulleys, etc. Application: For removing gears, sprockets, ball bearings, pulleys, etc. that are particularly difficult to remove. · Other technical specifications: Weight: 2.45 kg Clamping depth: max. 160 mm Clamping width: max. 160 mm

Condition: new, Puller tool 204-02, clamping diameter 100 mm, clamping width 90 mm, lateral clamping jaw, KUKKO · With lateral clamping jaw · Indispensable for removing flush-mounted ball bearings, bearing rings and similar parts in precision mechanics, electrical workshops, and for pneumatic maintenance, etc. · The claws of the puller hook engage under the part to be pulled when the clamping jaw is tightened, releasing it even before the actual pulling process begins. · Other technical features: Weight: 1.99 kg · Design: lateral clamping jaw Clamping depth: max. 100 mm Clamping width: max. 90 mm Knsdpfx As Ab Iz Hohioc