Used Roche Lightcycler Ii Thermal Cycler for sale (3,466)

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include Lsdoz Ai Tpspfx Agrjrt - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: used, Year of construction: 2004, workpiece height (max.): 60 mm, workpiece width (max.): 2,800 mm, workpiece length (max.): 1,300 mm, edge thickness (max.): 20 mm, feed rate X-axis: 40 m/min, The machine has the following configuration: Gluing Gluing system: EVA Adhesive application: single-sided and double-sided Scoring saw Motor power: 2.2 kW Speed: 6,000 min⁻¹ Profiling unit Lrjdpfoz Ekczox Agrjt Motor power: 6.6 kW Speed: 6,000 min⁻¹ Cross-cutting saw unit Number of motors: 2 Edge trimming unit, top and bottom Number of motors: 2 Motor power: 1.85 kW Speed: 12,000 min⁻¹ Edge rounding unit Number of motors: 2 Motor power: 1 kW Speed: 12,000 min⁻¹ Profiling unit with automatic, time-controlled engagement Motor power: 6.6 kW Speed: 6,000 min⁻¹ Profiling unit with automatic, time-controlled engagement Motor power: 6.6 kW Speed: 6,000 min⁻¹ Belt sanding unit Motor power: 2.2 kW Belt sanding unit Motor power: 0.75 kW Brushing unit Motor power: 0.75 kW Brushing unit TECHNICAL DETAILS Workpiece length: 280–1,300 mm Workpiece width: 320–2,800 mm Workpiece thickness: 8–60 mm Edge thickness: max. 20 mm Feed speed: max. 40 m/min MACHINE DETAILS Control system: ICOS OPEN EQUIPMENT Chain conveyor with drive shoes Pressure bar with rubber belt Edge heating lamps Roller magazine Hot-melt adhesive tank Hot-melt adhesive pre-melter Edge pressing unit with 9 pressing rollers CE-compliant The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents with a descriptive character. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 6561

Condition: like new (used), Year of construction: 2020, functionality: fully functional, GMP Roller Laminator EXCELAM-II 355 Q Working width 355 mm, hot lamination Laminator for hot lamination films from 32 - 175 microns Lrsdpfx Aszwwqljgret Infrared-heated silicone rollers, ensuring scratch-free lamination Equipped with an 8-bit microprocessor LCD display and electronic reverse function, standby function Temperature adjustable from 0-160 °C in 1°C increments Temperature and speed settings are pre-programmed for each film thickness The roller pressure can be precisely adjusted for each film thickness using a scale disc Max. passage height: 5 mm Adapter for 25 mm core diameter Working speed: 0-1.6 m/min, adjustable in 9 steps Connection: 220 V / 50 Hz / 1300 Watts Dimensions: W546 x D456 x H285 mm Weight: 25 kg

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 034108905, BOBST 100 II - A2 folding and gluing machine, manufactured in 1999. This efficient machine is designed for the production of straight-line packaging and packaging with a crash-lock bottom, handling cardboard and corrugated board. It features 6 cold glue applicators and one hot glue applicator. It also has a wheel-fed glue system with a container. It glues at 6 points – with various glue application methods. It includes a cassette for gluing envelopes. The HHS system in this version is very good – it can be used to produce envelopes, Advent calendars, and boxes. The machine can be inspected at our printing facility in Szczecin. Lrjdpfx Ajzwmvqsgrot

Condition: good (used), Year of construction: 2006, Capacity 30 - 50 kg/h Diameter of the briquets 50 mm Motor output 5,5 kW Dimensions (L/W/H) 2000 x 1300 x 1400 mm Weight 500 kg 1 m³ Lredpfsz D Iulex Agrjt

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, CNC turning machine Okuma LB 3000 EX II MYW 800 Control system: OSP-300L Year of manufacture: 2014 Internal machine number: 75 Distance between centers or spindle noses: 1085 mm Turning diameter over slide/bed: 340 / 580 mm Travel in X-axis: 260 mm Travel in Y-axis: 115 mm Travel in Z-axis: 1,010 mm Travel in C-axis: 360 mm Travel in W-axis: 895 mm Spindle bore: 72 mm Main spindle speed: 45 - 5,000 rpm Counter spindle speed: 45 - 6,000 rpm Ljdpfx Agezz Ihverjrt Tool holder: BMT Tool turret: V12 (powered) Equipment: Chip conveyor Touch probe Parts catcher Bar feeder IRCO MUK 7012 Bar length: 1250 mm Coolant system TM 24, 8 bar

Condition: used, Year of construction: 2008, For sale is a vertical CNC machining center, MAZAK VCN-510C-II, manufactured in 2008. The machine comes from an industrial facility and is offered including the accessories and tool holders shown in the pictures. Technical data: Manufacturer: MAZAK / Yamazaki Mazak Model: Vertical Center Nexus VCN-510C-II Year of manufacture: 2008 Serial/Part No.: C22U5630050 Control: Mazatrol Matrix Nexus Travel distances X/Y/Z: approx. 1,050 / 510 / 510 mm Table size: approx. 1,300 × 550 mm Tool magazine: 30 positions Spindle speed: up to approx. 12,000 rpm Tool holder: SK40 Lrodoz D Dg Depfx Agret Power supply: 3-phase, 400 V / 50 Hz Control circuit: AC 100 V / DC 24 V Rated connected power according to the nameplate: 33.1 kVA Weight: approx. 7,100 kg Dimensions: approx. 2,750 × 2,800 × 3,800 mm (W × H × L) Various tool holders and other accessories shown in the photos are included. Please refer to the pictures to determine the scope and exact assignment of the accessories, or check during an inspection. The machine shows signs of wear and tear due to age and use. Inspection is possible by arrangement. Loading, transport, and disassembly must be coordinated with the buyer in advance. Sale preferably to commercial enterprises. Subject to errors and prior sale.

Condition: reconditioned (used), Year of construction: 2008, functionality: fully functional, MAZAK QUICK TURN NEXUS 200-II 500U Max. machining diameter: 350 mm Max. machining length: 511 mm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Machine is equipped with: - CNC control: Mazatrol Matrix - KITAGAWA 3-jaw chuck BB-208, diameter 210 mm - Tool Eye - Automatic parts catcher - NC tailstock - Reinforced coolant pump - CROMAR chip conveyor - 1 set of tool holders Lodpfx Agoz Ea Akerert

Condition: excellent (used), Year of construction: 1998, Equipment: CE marking, documentation/manual, saw blade guard, scorer, Sled length: 3400 mm Cutting width at the rip fence: 1350 mm Cutting width at the crosscut fence: 3200 mm Cutting depth: 145 mm Scoring saw: yes With electromotive height and lateral adjustment Rapido scoring system for stepless cutting width adjustment Adjustment range 2.8 - 3.8 mm including scoring saw blade Height adjustment of saw blade: electric Swivel adjustment of saw blade: electric Adjustment of rip fence: manual Adjustment of crosscut fence: manual Display of saw blade angle: digital display Display of rip fence: scale Display of crosscut line: scale Ljdpfxjzq Srko Agrjrt Saw blade diameter: 450 mm Speeds: 4 Motor power: 5.5 kW Palin parallel cutting device as an add-on unit with miter adjustment with display on the sliding table Dust extraction connection: 80 and 120 mm Machine length: 3400 mm Machine width: 2200 mm Weight: 1200 kg Location: in stock at 54634 Bitburg - immediately available -

Year of construction: 1993, condition: used, functionality: fully functional, We offer this used ALMORE Mini calo cutting line for thermal insulation, built in 1993, with a double unwinding unit from Jouanel, in very good working condition. These machines are specialized in sheet metal processing and are particularly suitable for thermal insulation, industrial thermal insulation, and ventilation workshops. Functions include: length cutting, deburring, punching, and profiling. Machine weight: 2 tons. Lredpfxoz Dtmao Agrot If you have any questions or need further information, please do not hesitate to send us a message or call us.

Condition: used, Year of construction: 2012, Cutting length: 5300 mm Cutting height: 2100 mm Lodpfx Agoy A Hkuerert Cutting depth: 80 mm Scoring unit: no Feed: manual Horizontal cut indicator: Scale Vertical cut indicator: Scale Saw blade diameter: 300 mm Tilting material support: yes Saw blade speed: approx. 4000 rpm Motor power: 4 kW Machine length: 5500 mm Machine depth: 1500 mm Machine height: 2800 mm Weight: 800 kg

Condition: good (used), Year of construction: 2006, functionality: fully functional, Internal article number: 26098 Centrifuge Rösler Z 1000 ASS-2 Turbo Year of manufacture: 2006 Last maintenance performed with service report from 02/2026 The system is fully functional and in good condition. Operating hours according to the maintenance report: approx. 32,000 hours (as of 02/2026) Lodpfx Aez Dg T Hsgrjrt Dimensions (L x W x H): Centrifuge: 110 x 150 x 230 cm Lift pump: 50 x 70 x 80 cm Demineralized water tank: 120 x 240 x 210 cm Please note that you can find the suitable vibratory finishing system among the other offers.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, turning length: 760 mm, turning diameter over cross slide: 630 mm, turning diameter: 376 mm, spindle motor power: 18 W, spindle speed (min.): 40 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 81 mm, travel distance X-axis: 260 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 10 m/min, rapid traverse Z-axis: 30 m/min, type of input current: three-phase, bar passage: 81 mm, total height: 2,170 mm, total length: 4,400 mm, total width: 2,100 mm, overall weight: 6,650 kg, spindle diameter: 254 mm, Equipment: documentation/manual, rotational speed infinitely variable, USED ​​6-axis CNC lathe with counter spindle, live tools and Y-axis and FANUC 0i-TF PLUS CNC Ledozrmiaepfx Agrert

Condition: used, This listing is for Roche GS Junior 454 Sequencer Genome Sequencing Unit Lredpoxzh Szofx Agrst

Condition: used, Year of construction: 2014, x-travel 1740 mm y-travel 760 mm z-travel 660 mm Control PC-Fusion-640M spindle taper SK 40 spindle turning speed range 40 - 12.000 U/min spindle motor 30 kW distance spindle centre table top edge 180 - 840 mm table load 1400 Kg distance spindle center to column 830 mm rapid travel x/y/z 36 m/min table width 760 mm table length 2000 mm 5-T-slots - width x distance 18 x 125 mm table height over floor 825 mm tool change unit 30 tool changing time 4,7 sec wotkpiece diameter with 2 vacant positions 110 mm workpiece diameter at full load 80 mm max. tool weight 8 kg tool length - max. 350 mm air pressure - required 5 - 9 bar Air volume 140 l/min electrics - voltage/frequency 400 / 50 V/Hz coolant tank 360 l high-performance coolant system 15 bar total power requirement 22 kW weight of the machine ca. 11 t dimensions of the machine ca. 4,5 x 3,5 x 3,1 m Standard Equipment / Included Accessories - Through-Spindle High-Pressure Coolant System (15 bar) - Manual Pulse Generator (MPG) - Hinged Belt Chip Conveyor, Right-Hand Side Discharge - Torque-Controlled Chip Breaking Drilling Cycle - Performance Software Package Performance Software Package Includes - 600 User Variables Lodpfx Agszz Afierjrt - MAZAK Tornado Boring & Tapping Cycle (EIA/ISO) - Synchronous Tapping - EIA/ISO Program Input - Extended EIA/ISO Functions - G93 Inverse Time Feed - G37 Automatic Tool Length Measurement - Sequence Number Comparison Stop Function - G0 Inclination Constant - Additional Work Coordinate Systems (G54.1) - Thread Cutting Function General Machine Features Adaptive Feed Control (AFC) The Adaptive Feed Control system continuously monitors spindle motor load and feed axis servo load. If a significant deviation from the programmed load is detected, the feed rate is automatically adjusted to maintain optimum cutting conditions, improve productivity and protect the cutting tool. - MAZAK Standard Machine Colour Safety Equipment - Operator Safety Door with Interlock Switch - Fully Enclosed Splash Guard - Integrated Work Area Lighting - CE Conforming Machine Coolant System Through-Spindle Coolant (TSC) - Through-spindle coolant system - Pump pressure: 5 bar Complete coolant system including pumps, valves, piping and coolant nozzles for efficient machining and reliable chip evacuation. Measuring System Automatic Tool Length Measurement Automatic measurement of small-diameter tools without operator intervention. Chip Disposal Machine prepared for side-mounted chip conveyor CNC Control - MAZATROL PC Fusion CNC 640M - 10.4" Colour LCD Display - Relocation Detector MAZAK Tornado Boring & Tapping Cycle (MAZATROL) Helical interpolation allows boring and tapping operations over a wide range of diameters using a single tool, significantly reducing programming time and machining time while increasing flexibility. Background Tool Path Verification Tool paths can be verified in the background while another NC program is being executed in automatic mode. Machining Navigation – Prediction Prior to machining, the control predicts machining time, spindle load and other operating parameters, allowing programs to be optimized for maximum productivity. Machining Navigation – Monitoring Real-time display of machining conditions and machine loads with continuous feedback for process optimisation. Machining Navig...

Condition: used, mileage: 230,870 km, power: 120 kW (163.15 HP), first registration: 05/2013, fuel type: diesel, empty load weight: 4,285 kg, maximum load weight: 715 kg, overall weight: 5,000 kg, axle configuration: 4x2, wheelbase: 3,665 mm, fuel: diesel, CO₂ emissions: 262 g/km, fuel consumption (urban): 11.3 l/100km, fuel consumption (extra-urban): 9.1 l/100km, fuel consumption (combined): 9.9 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 4, total length: 6,450 mm, loading space length: 2,600 mm, loading space width: 1,500 mm, loading space height: 1,800 mm, Year of construction: 2013, construction height: 2,980 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), immobilizer system, soot filter, traction control, The Mercedes-Benz Sprinter II 516 CDI is a used ambulance with automatic transmission and Euro 5 emissions standard. The vehicle was first registered on May 30, 2013 and has a mileage of 230,870 km. The diesel engine with a displacement of 2,143 cc produces 120 kW (163 hp). The car stands out in terms of color with its yellow-red daylight fluorescent color. Special features include air conditioning, Eberspächer auxiliary heating and bi-xenon headlights with cornering lights. The Sprinter offers reinforced front and rear axles, a 75-liter fuel tank and twin tires on the rear axle for greater stability. In the interior it is equipped with an Audio 20 radio, adjustable exterior mirrors with integrated indicators and a heat-insulated driver's cabin. The vehicle has a combined fuel consumption of 9.9 l/100 km and CO2 emissions of 262 g/km. It has 4 seats, 4 doors and measures a total of 6,450 mm in length, 2,150 mm in width Lsdpor Uznysfx Agrjrt and 2,980 mm in height. Special equipment: 1 DIN slot at the front under the roof liner, passenger side airbag, starting aid (hill start assist), Audio 20 audio system (radio with CD player), exhaust in front of the left rear axle, outside temperature display, additional battery (reinforced), bi-xenon headlights with cornering light, 220 A generator, steering wheel (steering column mechanically adjustable), parameterizable special module, inside rear view mirror, rear wall with window, front mud flaps, reinforced rear stabilizer, reinforced front stabilizer, fuel level sensor for additional heating, cut-off relay for additional battery, rear wall paneling, fleece battery 95 Ah, preparation for mobile phone/cell phone/comfort telephony, reinforced front axle, thermal insulation in driver's compartment, additional heating (hot water) Other equipment: Adaptive brake light, driver's side airbag, washer fluid level display, electric outside mirror. adjustable and heated, both, exterior mirrors with integrated indicator light, battery 74 Ah, brake assistant, braking system with ABS+ASR, roof paneling in the driver's cab, lockable glove compartment, body/structure: flatbed, fuel tank: main tank 75 litres, headlight range control, truck registration, engine 2.1 litres - 120 kW CDI KAT, wheelbase 3665 mm, smoker's package, tire repair kit with compressor, low emissions according to Euro 5 emissions standard, seat belt system with warning system (driver's side), seat cover/upholstery: Lima fabric, Assyst maintenance interval display, heat-insulating glazing, permissible total weight 5.00 t, twin tires on 2nd axle/rear axle. CoC available Equipment was determined using a VIN query, errors can occur here for technical reasons Sale only to commercial operators (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Condition: used, Year of construction: 2003, Max. cutting width: 4300 mm Max. cutting height (horizontal): 2100 mm Max. cutting height (vertical): 2200 mm Lrsdpozx E T Rsfx Agrst Max. processing thickness: 80 mm Saw blade diameter: 300 mm Saw blade bore: 30 mm Support below: fixed rollers Material support: aluminum slat grid with plastic supports Small parts support: Yes Measuring system: scale Swiveling saw head: manual Weight (approx.): 750 kg Motor power: 5.5 kW Dust extraction diameter: 160 mm Location:

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total length: 7,800 mm, total width: 2,200 mm, overall weight: 2,100 kg, 2020 HEBBECKER VERSAJET II VJ-II-2-9090-4180 – Industrial Gas-Heated Textile Tunnel Dryer Professional industrial HEBBECKER VERSAJET II gas-heated textile tunnel dryer, manufactured in 2020 and designed for continuous, high-volume textile screen-printing production. The machine is equipped with a dual conveyor belt system (2 × 850 mm), allowing two production lanes to be used simultaneously. The touchscreen control panel provides convenient adjustment of the conveyor settings and drying temperature. The direct gas-heating system provides fast heat-up, high efficiency and uniform curing, while keeping electrical energy consumption very low compared with conventional electrically heated dryers. Key Features Manufacturer: HEBBECKER GmbH Model: VERSAJET II VJ-II-2-9090-4180 Year of manufacture: 2020 Serial No.: 2001948 Machine type: Industrial textile tunnel dryer Heating system: Direct gas heating Gas heating capacity: 40 kW Dual conveyor belt: 2 × 850 mm Heating zone length: 5,565 mm Electronic temperature control Temperature stability: ±2°C Fast heat-up time Designed for continuous industrial production Suitable for textile screen-printing curing and drying Heavy-duty industrial construction Low electrical energy requirement Quiet operation Dual Conveyor System Lrodpfx Asy Ty Sgjgret The VERSAJET II is equipped with two separate conveyor belts, providing two parallel production lanes. The touchscreen interface provides individual conveyor settings, making the dual-belt configuration particularly useful when processing different garments, print types or production batches simultaneously. Energy Efficiency The dryer uses direct gas heating without a heat exchanger, allowing the gas energy to be transferred efficiently into the drying process. According to the manufacturer's specifications, the system can provide more than 50% energy savings compared with electrically heated dryers, depending on operating conditions and configuration. Technical Data Electrical supply: 400 V / 3-phase / 50 Hz Electrical power: 3.2 kW Current: 5.1 A Fuse: 16 A Gas heating capacity: 40 kW Gas pressure: 30 mbar Conveyor configuration: Dual belt Belt width: 2 × 850 mm Heating zone length: 5,565 mm Machine weight: approx. 2,100 kg The HEBBECKER VERSAJET II is an excellent solution for professional textile printing companies looking for a high-capacity, energy-efficient gas dryer with a dual conveyor system. Machine available for inspection.

Condition: ready for operation (used), Year of construction: 1996, Immediately available ex location: CNC universal milling machine Reckermann Type: Primo II Ledpfx Agjzwudvorjrt Year of manufacture: 1996 Heidenhain TNC 430 control Spindle taper SK 50 Infinitely variable spindle speeds: 20 – 2,000 rpm Table load capacity: 1,000 kg Stepless feed rates: 20 – 6,000 mm/min Travel (X / Y / Z): 1,000 / 400 / 350 mm Drive: 7.5 kW Weight: 4 t Price: EUR 2,500 plus VAT, ex location

Condition: excellent (used), Year of construction: 2009, 348 USED Heuft thermal oil ovens. Year of manufacture: 2009 EQUIPMENT: - 2 x Heuft trolley ovens for 60x100mm sheets, - 1 x 15 m² deck oven (the oven has a 3+3-deck temperature control), - HK 200 heating boiler, Lrodpfxezxp Dys Agret - trolleys. The price is a net price. Pais options available: transport. Our languages: ENGLISH, GERMAN, FRENCH, RUSSIAN, UKRAINIAN.

Condition: good (used), Year of construction: 1977, HERA UM2 folding machine Brand: HERA Year of manufacture: 1977 Type: UM 2 Control type: Conventional Sheet thickness (mm): 2 mm Working width (mm): 3000 mm Machine weight (kg): 3000 kg Ledpfezupxcsx Agrjrt Length (mm): 3820 mm Width (mm): 800 mm Height (mm): 1850 mm

Condition: used, total width: 762 mm, total length: 1,448 mm, total height: 1,800 mm, For sale is a used Capsugel ULTRA 8 II, a semi-automatic capsule filling machine for powders in hard capsules. The machine is suitable for applications in the dietary supplement, pharmaceutical, and powder processing industries. The ULTRA 8 II is a production machine with a stainless steel design in the product and work areas, powder hopper, capsule feeder, rotating processing unit, and separate control cabinet. The machine shown is offered in its current condition and with the existing scope of supply. Technical data: Manufacturer: Capsugel / Lonza Capsugel Model: ULTRA 8 II Machine type: semi-automatic capsule filling machine / capsule filler Filling material: powder Processing: hard capsules; the actually installed capsule or format part must be checked on-site Production capacity: up to approximately 33,000 capsules/hour according to the manufacturer; the actually achievable capacity depends, among other things, on capsule size, product, dosage, format parts, operation, and machine condition. Format ranges specific to the series: depending on the format part, sizes from 000 to 5 are mentioned in comparable offers; the specific scope of supply of this machine must be checked based on the available format/change parts. Dimensions according to the manufacturer: approx. 1,448 × 762 × 1,800 mm (L × W × H) Installation area according to the manufacturer: approx. 1,448 × 762 mm Weight according to the manufacturer: approx. 680 kg Closing system: integrated, horizontal hydraulic closing system; according to the manufacturer, no compressed air is required for the closing process. Drives: variable speed drives for capsule alignment, dosing screw, and rotary table Vacuum: integrated vacuum pump Capsule feeder: large-capacity capsule hopper and automatic ring spinner Format change: "pinned" change parts for quick and reproducible setup Operation/control: digital displays and separate control cabinet Design: stainless steel table top, ring carrier, powder hopper, and enclosure Equipment and visible components: Stainless steel powder hopper Lrsdpfx Aezvmnwegrst Capsule feeder and rotating capsule holder Dosing and filling area Integrated drives and gearboxes Hydraulic assembly with pressure gauge Integrated vacuum unit Separate control cabinet with control, protection, and regulation components Emergency stop switch Stainless steel machine frame and enclosure

Condition: excellent (used), Year of construction: 2022, Turning diameter 376mm, turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees on both spindles, 24 station turret, Ledpfx Aozt Spnjgrsrt 22KW Motor, Main spindle 4000rpm, sub-spindle 4500rpm, Fanuc I series, 3 jaw chucks, swarf conveyor, tool setter, LNS barfeed unit.

Condition: excellent (used), Year of construction: 2003, 526 USED Industrial line for the production of rolls, Kaiser rolls, hamburgers, and hot dogs. EQUIPMENT: - KOENIG INDUSTRIE II divider-rounder - 6 rows - pre-proofer - bun marking station - final proofer TECHNICAL DATA: - year of production: 2003 - capacity 3000-12,000 rolls/h - weight 50-130 g - marking: 3 roll markings: Kaiser roll, Portuguese roll - final proofer equipped with temperature and humidity control EXTERNAL DIMENSIONS (in cm): LINE: - W: 180 cm - L: 900 cm - H: 376 cm FINAL PROOFER: - W: 340 cm Lredpfxszwxr Ro Agrjt - L: 460 cm - H: 380 cm The price is a net price. Paid options available: transport. Our languages: ENGLISH, FRENCH, GERMAN, RUSSIAN, UKRAINIAN.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, The used QUASER MV 204 CV vertical machining center is a medium-to-large-sized CNC machine with a cast iron structure, featuring 4 sliding guides (roller type) for the table. It has travels of X 1270, Y 700, and Z 610 mm, a table size of 1400×700 mm, and a maximum load capacity of 1,800 kg. It is equipped with a BT40 spindle operating at 12,000 rpm (max. 15 kW), cooled by a dedicated chiller. High-pressure coolant is supplied through the spindle. It features a RANDOM tool changer with a 30-position exchange arm, RENISHAW TS27 tool presetter, and a chip conveyor for chip evacuation. Lrodpfx Aozu At Tjgret Year of manufacture: July 2010 (installed in 2012). It includes a FANUC 21i-MB CNC control with manual guide i, card port, serial RS 232 connection, and Ethernet network. Complete with manuals and CE certificate.