Used Rotina Fertilizer Spreader for sale (609)

Condition: used, Year of construction: 2022, Documentation in German Spr Type plate PTO shaft 910 mm with / friction clutch Container attachment L 3200 swivel mounted ex works Mud flaps L / and ladders LED lighting to the rear for road travel Roll-up tarpaulin L / with manual operation Hedpfx Aerxr R Sjaiefk

Condition: used, Electric tank volume measurement Centrifugal pump 785 l/min Fresh water tank 600 l / High-performance pump system 600 Autom. Opti-Flow flow Self-priming pump / Independent wheel suspension with hydraulic height and axle adjustment LED / Working headlight Hyd Hfodpfouccr Dex Aaijk

Condition: used, Year of construction: 2023, Spreading vane set TS30 right ISOBUS operator terminal AmaTron4 ArgusTwin for / ZA-TS WindControl for ZA-TS Hydro GPS-Switch basic for AmaTron4 SpreaderConnect / for ZA-TS Drive Hydro left with AutoTS Drive Hydro right with AutoTS / main disc left Hodpfx Aaot Nf Dqeiefk

Condition: used, Year of construction: 2024, Basic hopper / ZA-V Easy spreader unit / warning sign foiling / 910 mm PTO shaft / with friction clutch / S 1400 hopper extension, welded / factory-fitted / S mud flap / LED lighting to rear / Easy operating computer Hodpfxeuhp Ehe Aaijfk

Condition: used, Year of construction: 2014, Equipment: compressed air brake, Spray nozzle up to compartment Nozzle holder axis rigid / Hfsdpfx Aet A A Srjaijk

Condition: used, Year of construction: 2024, ArgusTwin + WindControl Spreader Connect Hydro drive left and right with / AutoTS and FlowControl Profis Pro main screen left and right with AutoTS / Rolling and parking device s Tilt sensor EasyCheck mats, 16 pieces / Device control unit Hfsderxr U Depfx Aaijk

Condition: used, Year of construction: 2004, Quantron P Terminal 3000L hopper approx. 12000ha spread tarpaulin working width / 27m mud flap hyd. Drive Lighting / Hjdpfx Astgqfdeaijfk

Condition: used, Year of construction: 2011, 5 boom sections, 15m , induction bowl / HC 5500 Computer + Spray II flow control / rinse water tank single nozzle holder / / Hfsdpfxst Dx Urj Aaijk

Condition: used, Year of construction: 1990, Hydraul. Folding to the front Electric control panel Hydraulic lift / PTO shaft / Hjdpjuambdjfx Aaiefk

Condition: used, Year of construction: 2003, for MB Unimog 3000 l capacity Isobus Without terminal 24 m working width / Hodpfotrft Ssx Aaiefk

Condition: like new (used), Year of construction: 2020, operating hours: 1,647 h, load capacity: 3,500 kg, lifting height: 220 mm, fuel type: electric, mast type: simplex, Manufacturer + model: JUNGHEINRICH EJK 335 Drum forks / Spreader!!! ID: 26062.6948 Category: Used Mast: 1F220 Forks: 1150 mm Capacity: 3500 kg Year: 2020 Hours: 1649 hours Battery: 24v / 375Ah Options: SPECIAL build!!! Drum roll / Spreader - forks!!! Distance between support legs: 1400 mm Hedpfx Aezuug Eeaisfk Truck width over support legs: 1740 mm Power steering

Condition: good (used), mileage: 99,747 km, power: 169 kW (229.78 HP), first registration: 12/2005, fuel type: diesel, tire size: 315 / 80 / R22.5, axle configuration: 6x2, wheelbase: 4,900 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 4, emission class: euro3, suspension: steel-air, number of seats: 2, total length: 8,300 mm, total width: 2,500 mm, total height: 3,500 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 7,500 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2005, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, power mirror, Technical information Number of cylinders: 5 Engine capacity: 8.867 cc Transmission Transmission: Allison, 4 gears, Automatic Axle configuration Tyre size: 315 / 80 / R22.5 Make axles: Scania Brakes: disc brakes Front axle: Max. axle load: 7500 kg; Steering; Tyre profile left: 30%; Tyre profile right: 30%; Suspension: leaf suspension Rear axle 1: Lift axle; Max. axle load: 7500 kg; Steering; Tyre profile left: 60%; Tyre profile right: 60%; Suspension: air suspension Rear axle 2: Double wheels; Differential lock; Max. axle load: 11500 kg; Tyre profile left inner: 40%; Tyre profile left outer: 40%; Tyre profile right outer: 40%; Tyre profile right outer: 40%; Reduction: single reduction; Suspension: air suspension Weights Empty weight: 11.075 kg Carrying capacity: 15.425 kg GVW: 26.500 kg Functional Make of bodywork: Nido Stratos B50-42 VAXN Stratos B50-42 VAXN Pump: Yes Interior Interior: grey History Number of owners: 1 Condition Technical condition: good Visual appearance: good Number of keys: 2 (2 hand transmitters) Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL = Additional options and accessories = - 12 volt socket - Car kit - Heavy duty engine brake - Power take-off (PTO) - Radio/CD player - Remote central locking Hfodpozrtuijfx Aaiok - Speed limiter - Stability control - Toolbox - Visor

Condition: used, Year of construction: 2004, functionality: fully functional, type of input current: three-phase, total width: 1,800 mm, total length: 16,500 mm, input voltage: 400 V, input current: 10 A, 21 C – GERBER Spreader SY 101 Fabric Spreading System – Complete Cutting Room Line Description Hsdpey Avqdofx Aaisfk For sale is a GERBER Spreader SY 101 industrial fabric spreading system, including the spreading unit and full table infrastructure. This system is designed for efficient and precise spreading of fabric layers across long cutting tables in high-volume garment production. It ensures consistent material handling, accurate layer control, and significantly improves cutting room productivity. The system has been operated as part of a complete production line together with a Gerber automatic fabric loader (unit 31 C) and a Lectra VT-FA-MH-71 CNC cutting system (unit 29 C). This setup enables a continuous workflow from roll loading to spreading and cutting, reducing manual labor and increasing overall throughput. The machine was used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video recorded in operation on 05.03.2026. Includes • GERBER Spreader SY 101 • Rail-mounted motorized drive system • Integrated control panel • Full-length spreading tables (approx. 16.5 m) • Fabric roll holder system • Conveyor-based / air flotation table structure • Integration capability with loader and cutter systems Technical Specifications • Manufacturer: Gerber Technology • Model: SY 101 • Type: Fabric spreading system • Application: Cutting room / spreading line Capacity • Max roll width: approx. 1800 mm • Max roll weight: approx. 100 kg • Max roll diameter: approx. 500 mm • Max lay height: approx. 230 mm Performance • Max spreading speed: up to 100 m/min • Length accuracy: ±2 mm Electrical • Voltage: 230 V / 400 V, 50/60 Hz • Power: approx. 2.5 kW • Compressed air: approx. 6 bar System Features • Air flotation table for low-friction material handling • Tension-free fabric feeding system • Precise length control for minimal material waste • Compatible with automated loaders and CNC cutting systems Advantages • High-precision spreading reduces material waste • Continuous production flow • Reduced manual handling • Suitable for denim, workwear, and technical textiles • Modular system adaptable to different layouts Condition Used industrial condition Operational prior to shutdown Typical signs of industrial use Inspection possible prior to dismantling Sold as-is, where-is, without warranty Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 20082, type of input current: three-phase, total width: 2,000 mm, total length: 6,700 mm, input voltage: 400 V, input current: 10 A, 32 C – GERBER XLS-125-180-L Automatic Fabric Spreader – Industrial Spreading System Description For sale is a GERBER XLS-125-180-L automatic fabric spreading machine designed for high-volume textile and garment production. This industrial spreading system enables precise and efficient multi-layer fabric spreading directly onto a conveyor table. The motorized spreading carriage ensures consistent material handling, alignment, and production speed, making it suitable for demanding production environments. The machine is known as a reliable industry workhorse, capable of handling a wide range of materials from heavy denim to lightweight fabrics. The system has been operated as part of a fully integrated cutting line together with a Lectra Vectorfashion VT-FA-Q2-72 cutter (unit 35 C) and FINN-CONVEY V307 conveyor system (unit 30 C). This setup significantly improves production flow, reduces manual labor, and enables continuous high-volume operation. The machine has been used in a professional garment factory and was operational prior to factory shutdown. Recently serviced on 27.02.2026. Video available from operation (05.03.2026). The video material shows the GERBER spreading system in operation together with other cutting line equipment, including a Lectra Vectorfashion VT-FA-Q2-72 CNC cutter (unit 35 C) and a FINN-CONVEY V307 conveyor system (unit 30 C). Includes • GERBER XLS automatic spreading machine • Motorized spreading carriage • Roll holder system • Integrated touchscreen control panel • Fabric alignment and feeding system • Mounted rail system for table operation Technical Details • Manufacturer: Gerber Technology • Model: XLS-125-180-L • Year: 2009 • Serial number: 20082 • Max roll weight: 125 kg • Max roll diameter: approx. 600–650 mm • Machine weight: approx. 400 kg • Spreading width: up to 1800 mm • Speed: up to approx. 100 m/min (material dependent) • Voltage: 3 x 380–415 V • Frequency: 50/60 Hz • Current: approx. 10 A Key Features • Fully automated fabric spreading for reduced manual labor • Suitable for both rolled and folded fabrics • Precision tension control to prevent fabric distortion • Accurate edge alignment for material optimization • Touchscreen interface for easy programming and control • Integrated safety systems including emergency stop and sensors Production Advantages • High precision reduces material waste • Fast spreading significantly improves cutting room throughput • Consistent tension ensures dimensional stability of cut parts • Enables efficient multi-layer cutting preparation Maintenance & Reliability Gerber spreading systems are known for strong spare part availability and long service life. Condition Used industrial condition Fully operational prior to shutdown Recently serviced (27.02.2026) Video available from operation (05.03.2026) Typical signs of use from production environment Inspection possible prior to dismantling Sold as-is, where-is, without warranty Typical Applications • Automatic fabric spreading • Multi-layer cutting preparation • Denim and heavy fabric production • High-volume garment manufacturing • Cutting room operations Hfsdpey Alciofx Aaiek Location Valga, Estonia Removal & Transport Buyer responsible for dismantling and transport Professional dismantling recommended due to system size

Condition: new, functionality: fully functional, Year of construction: 2026, RPS-6000/9000 SALT & SAND SPREADER Hfsdpfet N Ty Tjx Aaijk TICAB (Trade Industrial Company AB) — a leading manufacturer of road maintenance equipment in Europe — offers you a cost-effective solution for efficient local repair and maintenance of asphalt concrete surfaces. Salt and Sand Spreader RPS-6000/9000 TM TICAB is a perfect solution for de-icing the streets and highways. New Salt and Sand Spreaders RPS-6000/9000 with 6 m3/9m3 capacity are made for spreading de-icing agents. Allowable outside temperature is to -40°С. The spreader should be mounted on a truck using a crane. The salt spreader RPS-6000/9000 is a prospective investment. Fits any truck. Technical Specifications ● Recommended velocity up to 30 km / h. ● The spreading density is 350 g/m2. ● The spreading width is up to 4-8 m. ● Width and density regulation from the Spreader body. ● Disc spreader stainless steel. Position regulating. ● Autonomous (diesel engine). ● Feed mechanism - conveyor chain. ● Adjusting the spreading angle. ● Protective awning. ● «ON» / «OFF» from the driver’s cab. ● In-cab adjustment of width and density of spreading. Service Terms ● In stock ● Warranty: 12 months ● Delivery: from the manufacturer’s warehouse ● Support: manual, technical assistance, video instructions

Condition: new, Year of construction: 2026, Autonomous spreader of sand-salt mixture RPS-1500 from ТМ TlSAV - is a powerful equipment for high-quality spreading of roads and pavements with de-icing materials, which allows to minimize the use of manual labour and reduce the accident and risk of injury to people. The spreader is equipped with a 1.5 m³ hopper with a scraper-chain feeding mechanism and a disc for spreading materials. Thanks to its autonomy and compact dimensions it can be used with any vehicle. CHARACTERISTICS -Spreading width, depending on disc speed - 3-6 m. - Hydraulic drive mechanisms. -Adjustment of the disc inclination (manual). -Mix feeding mechanism - scraper-chain. -System of proportional control of disc rotation speed on the control unit in the driver's cab - (optional). - Control of the equipment by remote control from the driver's cab. - It has its own wheelbase or can be mounted on the customer's vehicle. TICAB is a manufacturer of road machines: bitumen emulsion sprayers, joint and crack fillers, asphalt recyclers, street hoovers, universal loaders and other road machinery. High European quality, competitive prices. If we do not have an official representative office in your country, we are looking for a distributor! We will be glad to contact you! Sand spreader with capacity of 6 cubic metres (9 tonnes of mixture) for treatment of carriageway with anti-icing materials (sand, salt, sand-salt mixture) in winter period and transportation of asphalt concrete mixture in summer period. Sand spreaders are installed in the lorry body with the help of a crane. -Dimensions: L-4.5 m; W-2.10 m; H-1.85 m - Travelling speed - up to 30 km/h. - Strip treatment width up to 10 m, spreading density - up to 350 g /m. - Adjustment of width and density of spreading - on the body of the spreader. -Feed distributor is disc-shaped (stainless steel), equipped with a protective cover, height adjustable, equipped with a hydraulic motor. - Power take-off of the hydraulic system - from the standard power take-off box of the vehicle. -Scraper-chain sand (salt) feeding is equipped with a hydraulic motor, with protection against ingress of small foreign objects. Hfjdpfx Aaevpp S Njiek - Adjustment of scattering ‘right-left-proportional’. - Control (ON/OFF) from the driver's cab.

Condition: new, Year of construction: 2026, RPS-1500 The RPS-1500 self-contained sand-and-salt spreader from TISAV is the ideal piece of equipment for the effective spreading of de-icing materials on roads and pavements, minimising the need for manual labour and significantly reducing the risk of accidents and personal injury. The spreader is fitted with a 1.5 m³ hopper featuring a scraper-chain feed mechanism and a disc for spreading materials. Thanks to its self-contained design and compact dimensions, it can be used with any vehicle. SPECIFICATIONS: • Spreading width, depending on disc speed – 3–6 m • Hydraulically driven mechanisms • Disc tilt adjustment (manual) Hodpst Ifxlofx Aaiofk • Mixture feed mechanism – scraper-chain • Proportional control system for disc rotation speed via the control unit in the driver’s cab (optional) • Equipment controlled via a control panel from the driver’s cab. • Features its own wheelbase, or can be mounted on the customer’s vehicle.

Condition: new, functionality: fully functional, color: orange, empty load weight: 2,200 kg, brakes: other, gearing type: other, emission class: none, loading space length: 5,745 mm, loading space height: 2,821 mm, Year of construction: 2026, Equipment: additional headlights, hydraulics, TICAB RPS 9000 (9 m³) Sand & Salt Spreader | Heavy-Duty Winter Road Maintenance Equipment Engineered for productivity and durability, the RPS 9000 provides uniform spreading performance even in extreme weather conditions, helping maintain safe and accessible roads throughout the winter season. The TICAB RPS 9000 is a high-capacity, professional-grade sand and salt spreader designed for efficient winter road maintenance, snow and ice control, and anti-icing/de-icing operations. Built for demanding conditions, it ensures reliable performance on highways, municipal roads, airports, parking areas, and industrial surfaces. Key Advantages Hfjdpfjx Uwp Esx Aaijk ✔ Large 9 m³ hopper capacity for long, uninterrupted operation ✔ Hydraulic scraper-chain feeding system ensures stable and consistent material flow ✔ Disc spreading system for precise and uniform salt/sand distribution ✔ Adjustable spreading width from 4 to 8 meters ✔ Optional autonomous engine for independent operation ✔ Optional cab-controlled proportional disc speed for enhanced precision ✔ Quick mounting system for fast installation on trucks ✔ Heavy-duty construction designed for harsh winter environments Applications • Winter road maintenance and snow control • Anti-icing and de-icing operations • Highway and municipal street maintenance • Airport runways and taxiways • Parking lots and logistics centers • Industrial and commercial территории Built for Professional Winter Operations The TICAB RPS 9000 is designed to meet the demands of modern winter maintenance fleets. Its high-capacity hopper and precise spreading system ensure efficient material usage, reduced operating costs, and improved road safety under snow and ice conditions. Why Choose TICAB RPS 9000? • High productivity with large working capacity • Reliable performance in extreme weather conditions • Precise and uniform spreading quality • Flexible truck-mounted design • Ideal for municipal and highway winter service fleets Request a Quote Today Contact us for pricing, delivery options, and full technical specifications. The TICAB RPS 9000 is available for fast production and worldwide shipping.

Condition: new, functionality: fully functional, color: orange, brakes: other, gearing type: mechanical, emission class: none, suspension: hydraulics, Year of construction: 2026, Equipment: additional headlights, fog lights, hydraulics, low noise, onboard computer, traction control, TICAB Sand & Salt Spreader RPS 1500 | 1.5 m³ – Professional Winter Road Maintenance & De icing Equipment Featuring a 1.5 m³ hopper, hydraulic drive and efficient brush chain feed, this spreader delivers uniform distribution of salt, sand, grit, and other anti skid materials, helping municipalities, contractors and road services maintain safe roads, sidewalks and pavements throughout the cold season. The TICAB RPS 1500 is a high performance sand and salt spreader engineered for winter road maintenance, snow and ice control, anti icing, de icing, and surface safety operations. Key Features • Hopper capacity: 1.5 m³ for extended operation without frequent refills • Hydraulic scraper chain feeding system for reliable material delivery • Spreading width: 3–6 m (varies with disc speed) for broad winter coverage • Disc spreader with adjustable tilt for optimized salt and sand dispersion • In cab control panel with optional proportional disc speed control • Can be mounted on a trailer or customer truck chassis for versatile use Applications • Winter road de icing & anti icing spreading • Municipal street, highway & urban pavement treatment • Sidewalks, parking lots & industrial surface maintenance Hfodpfjx Uql Hex Aaijk • Sand, salt & grit spreading for traffic safety Why Choose TICAB RPS 1500 It’s a cost effective choice for municipalities, winter service contractors, and road maintenance fleets. The TICAB RPS 1500 delivers compact design, high efficiency, and reliable performance — reducing manual labor, improving safety, and increasing productivity during winter road service, de icing, and anti skid applications Contact us for price, delivery options, and full technical specifications. Get ready for safe winter roads with TICAB!

Condition: new, functionality: fully functional, color: orange, brakes: other, driver cabin: other, gearing type: other, emission class: none, suspension: other, Year of construction: 2026, Equipment: all wheel drive, fog lights, low noise, TICAB Sand & Salt Spreader RPS 6000 – Road De icing & Winter Maintenance Equipment The TICAB RPS 6000 Sand and Salt Spreader is a high capacity winter maintenance machine engineered for large scale snow and ice control, road de icing, and anti icing treatment on local, national, and international roads, highways, streets, parking lots, and airport surfaces. Hfodpfx Aaex U Sv Tjisk Developed for efficient, continuous spreading of sand and salt mixtures, this spreader delivers uniform coverage and high productivity during winter service. Key Features: • Large hopper capacity: 6 m³ for prolonged operation without frequent refilling • Hydraulic drive system with scraper chain feed for reliable material supply • Wide spreading width: 4–8 m — ideal for single to multi lane roads and highways • In cab control: on/off and optional proportional disc speed control from the driver’s cabin • Optional autonomous engine for independent operation • Easy removal from truck chassis so vehicle can be reused after winter service Applications: • Winter road maintenance and anti icing operations • Spreading salt, sand, grit, and de icing agents • Highway, municipal street, airport, industrial yard, and parking lot treatment • Surface preparation and ice prevention for safer traffic Why Choose TICAB RPS 6000: The TICAB RPS 6000 combines high productivity, reliable hydraulic drive, large hopper capacity, and adjustable spreading performance, making it a top choice for contractors, municipalities, road service companies, and airport operations focused on efficient, high quality winter road maintenance. Contact us now for price, delivery options, configuration details, and full technical specifications.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, working width: 200 mm, working height: 40 mm, Equipment: documentation/manual, Impregnation machine / Coating machine Manufacturer: Schiele Type: Impregmat VM Mini Year of manufacture: 2016 Board coating machine with brush application, suitable for coating profiled boards, moldings, and construction timber. Suitable coating systems: Suitable for water-based paints and coatings Suitable for solvent-based paints, stains, and coatings Working width: approx. 30 - 200 mm Workpiece height: approx. 5 - 40 mm Workpiece length: from approx. 800 mm - endless Hfodpfszpydrox Aaiek Feed speed: approx. 20 m/min pneumatic double-diaphragm pump Stainless steel machine body for easy cleaning with roller conveyors before and behind the machine, length approx. 2000 mm each Documentation & wiring diagram available

Condition: used, Year of construction: 2020, _____KTS 30 Special / Crane-Manure Tank Saddle Trailer, 3-axle, 30 cbm tank capacity - V2A stainless steel tank, DIN 1.4301, manufactured in-house - Nova-Gray powder-coated frame - Tank diameter 2200 mm - Manhole at the rear - 3 baffle plates specially welded - Rinsing system for stirring the contents - 2 x hose storage, aluminum - Tire size 385/65 R 22.5 - 3 axles, SAF with air suspension - ABS - EBS - Disc brakes with special off-road protection - Wabco braking system with spring brake accumulator and parking brake - 1st axle as a lift axle with starting aid - 2nd axle rigid - 3rd axle trailing steering axle with automatic locking from 30 km/h and when reversing - Automatic filling shut-off via float and indicator at the front - Free filling and venting - 6 x polyethylene fenders - 2 x LED work lights at the rear - Aluminum support legs - Underrun protection with truck tail lights - 1 x lockable storage box on the left, water tank with soap dispenser for hand washing on the right - Document holder - Ge-Ka couplings for filling at the suction arm - Compressed air discharge at the suction arm for suction hose - TÜV inspection - Surcharge for tank with 31.7 cbm - KTS surcharge for 31.7 cbm tank instead of 30.0 cbm (longer chassis required) - All KTSPROFI package, KTS 30 light - Simplest operation by pressing a button - Fully automatic interlocking of the tank ventilation valves - No possibility of incorrect operation - With overpressure and underpressure valves - Ventilation valve and suction valve as pneumatic flat gate valves - Main control panel at the rear left in a stainless steel housing with laser-engraved control panel - Additional control panel at the front left, level indicator at the rear with cover - Automatic pump shut-off when full - Pump Vogelsang 6 cbm KTS 30 - Vogelsang rotary lobe pump VX 186-260, 6,000 liters / min. - Injection system and interchangeable housings - Docking funnel at the top, 8 inches with knife gate valve (KTS) - with pneumatic actuation (flat gate valve) for all vehicles - Pump mounting parts in stainless steel 1.4301 - instead of galvanized version - Flat gate valve under the tank, KTS 30 - Flat gate valve under the tank for discharging with KTS 30 (MANDATORY !! for KTS docking funnel at the bottom and if there is the possibility of transferring liquid) - Overflow tank, KTS - made of stainless steel with swivel flap and drain valve - Additional LED headlight at the front (2 pieces) - 2 LED spotlights at the front, mounted under the hose trays on the right and left - Transfer crane 6" KTS short - Transfer crane in 6" up/down, right/left, approx. 6 m long. Only for emptying! - Slide dome cover 600 KTS 30 - Slide dome cover 600 pneumatic for KTS 30 - Storage location: BNP PARIBAS LEASE GR Hsdpfx Aaezpgrieijfk

Condition: used, functionality: fully functional, Equipment: double-sided, Amod CDL 1300, double-sided adhesive applicator Hodpfezrlykex Aaisfk Working width: 1300 mm Min./max. clearance: 0-90 mm Diameter of application rollers: 170 mm Two feed speeds Year of manufacture: 1994

Condition: used, Year of construction: 2016, _____For sale on behalf of a customer: Kaweco Profi 2. 20 VCB, year of manufacture 2016, suction arm on the right, forced steering, tires 750/60 R30.5, telescopic axle, hydraulic suspension, hydraulic drawbar suspension, air pressure plus hydraulic brakes, ball hitch, load sensing (but not Isobus), vacuum pump 13500 liters, 3-point hydraulics, 7.20 meter Opti-Ject slot seeder. Price: 55,000.00 euros net, storage location: null. Hfjdpfx Aajzpcvkeiok

Condition: excellent (used), functionality: fully functional, Year of construction: 2011, operating hours: 5,672 h, load capacity: 3,000 kg, lifting height: 4,100 mm, free lift: 2,000 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 2,900 mm, motor manufacturer: G.M., gearing type: hydrostat, fork carriage width: 4,000 mm, fork length: 1,200 mm, fork width: 120 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 23X10-12, rear tire type: cushion tires (black), rear tire size: 355X65-15, overall weight: 9,800 kg, empty load weight: 6,800 kg, total height: 2,550 mm, total length: 2,100 mm, total width: 2,300 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, pallet forks, sideshift, 🔶 COMBILIFT C3000XL – 2011 – 5672 HOURS – LPG – DUPLEX 4100 mm – SPREADER BEAM – CONDITION 5/5 🔶 🏷️ Used and new forklifts with guaranteed quality – FT LOGISTICS ✔️ Ready for operation. No compromises. Hfsdpfjzq R R Sjx Aaisk This COMBILIFT C3000XL is not just a machine — it is a guarantee that your logistics will proceed smoothly, reliably, and without interruption. Designed for demanding applications and fully reconditioned both technically and visually, the forklift presents as new and is ready for immediate use. 📌 Key Technical Data: 📅 Year of manufacture: 2011 ⏱️ Operating hours: 5672 🔥 Drive: LPG 💪 Load capacity: 3000 kg 📏 Mast: Duplex – 4100 mm 🔧 Fork positioner: 1340 mm | Forks: 1200 mm 🟦 Spreader beam: 4000 mm | Forks: 1200 mm 🛞 Tyres: Super elastic (100%) 🛠️ Technical condition: 5/5 – fully serviced, ready for operation 🎨 Visual condition: refurbished, corrosion-free, like new 📐 Dimensions: Height 2550 mm | Length 2100 mm | Width 2300 mm 📦 Overall height: 2900 mm 🛞 Tyres: SE – Front 23x10-12 | Rear 355x65-15 🏗️ Free lift: 2000 mm 📦 Perfect for: 📚 Narrow aisle warehouses 🪵 Steel, timber and pipe industries 📏 Handling long loads 🏭 Indoor and outdoor operations FT LOGISTICS – Quality you can rely on. Service you can trust.