Used Rs 091 for sale (6,786)

Condition: used, Year of construction: 2010, functionality: fully functional, temperature: 1,700 °C, number of chambers: 1, control type: PLC-controlled, actuation type: electric, fuel type: electric, Equipment: CE marking, Excellent Condition: Used High-Temperature Vacuum Furnace PVA TePla COV 733 RS Condition & Terms of Sale: Please note: The furnace is being sold strictly on an "AS IS, WHERE IS" basis directly from our warehouse. The furnace was professionally dismantled from a working cleanroom environment. All wiring and connections are carefully labeled for easy reassembly by the buyer. Psdpfxszkwp Io Ai Togu For full transparency: Two internal graphite heating elements were damaged during the dismantling process and will require replacement. Otherwise, the equipment is 100% complete and ready for immediate relocation. You are highly encouraged and welcome to physically inspect the equipment in our warehouse near Białystok, Poland, prior to purchase. ##### Equipment Overview: Furnace chamber made entirely of stainless steel, double-walled for water-cooling. Horizontal design for easy loading and unloading and good accessibility for maintenance and service. Internal graphite box for precise guidance of process gases. Equipped with post-cleaned graphite components. Automatic control of the entire process sequence. Usable batch chamber (Width x Height x Length): 840 x 815 x 1000 mm. Total length of the graphite box: approx. 1100 mm. Maximum operating temperature under partial pressure: 1500 °C. Under vacuum: 1700 °C. Temperature uniformity: ± 10 K. Temperature fluctuation in steady state: ± 5 K. Process pressure range: 1×10-2 < p < 1040 mbar. TECHNICAL SPECIFICATIONS COV 733 RS Operating temperature: max. 1700 °C Max. load dimensions: 840 x 815 x 1000 mm Useful volume: approx. 685 L Temperature uniformity: ± 10 K Power supply: 3 x 400 V (50 Hz) Max. permissible voltage fluctuations: ± 5 % Installed heating power: max. approx. 190 kW Pump station - Final pressure in an empty, clean, and cold furnace: < 1×10⁻² mbar - Electrical power of the pump station: approx. 14 kW Leak rate: < 5×10⁻³ mbar·L/s Cooling water - Cooling water flow rate: approx. 150 L/min - Cooling water temperature: 20 ≤ TCW ≤ 30 °C - Cooling water pressure: 2 ≤ PCW ≤ 4 bar Cooling water quality requirements according to specification: PW 800 943 ND. Gas supply: Compressed air: for valve actuation (PVA) 4 ≤ PVA ≤ 5 bar A compressed air maintenance unit must be provided by the Customer. Nitrogen: Gas inlet pressure (PN2) 5 ≤ pN2 ≤ 7 bar Hydrogen: Gas inlet pressure (PH2) 5 ≤ pH2 ≤ 7 bar Space requirements - Width x depth x height to be determined in consultation with the Customer - Floor area to be determined in consultation with the Customer Foundation: level ground, no special preparations required.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2024, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/Rhld) Model: RS 6/1000 Machine No.: 51261 Year of Manufacture: 1978 Weight: 680 kg Overhauled: 11/2024 by Wiemers AG General Information / Technical Data: Overhauled mechanical vertical broaching machine Rausch RS 6 G Pulling force: 60 kN Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1000 mm Maximum tool length: 1200 mm Table dimensions / Working area: 610 x 470 mm / 520 x 320 mm Table aperture: Ø90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,250 mm x 850 mm x 1,200 mm (H = table height from floor, without attachments) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Additional modifications/upgrades to the original machine performed: - External stroke adjustment - New, machine-independent, reproducible tool length adjustment system - Additional limit switches for end position monitoring - Safety door with monitoring (integrated in the emergency circuit) - Machine enclosure below safety door with chip protection and tool storage area - Electrical sensing of clamping jaws (tool removal monitoring to prevent unintended retraction of the broaching bridge) - Coolant swing system with solenoid valve operated during swing motion (for switching on coolant before broaching stroke – optical flow control ensures lubrication, no dry cutting!) - Routing of electrical cables in protective steel conduits - Heavy-duty control cabinet mounting for machine components - Additional oil-proof drip tray on the control cabinet - Three-sided closed splash guard cabin (W = 960 x D = 450 x H = 590 mm) - Reinforced chip screen with magnetic separator Pjdjw Ighispfx Ai Togu - Control panel made of stainless steel with durable labeling - 4 central lubrication points for trapezoidal spindle drive Remarks: The machine has been completely overhauled, the machine body fully refurbished. All wear parts have been replaced. - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals renewed - The coolant system (pump, solenoid valve, and drain tap), including the coolant/lubrication swing system, is new - The clamping jaws are new - Complete electrical system (control cabinet) is new - All sheet metal and enclosures are new - The following components have been overhauled and re-used: - Machine base - Machine column - Machine table with table insert - Broaching bridge (clamping jaws new) - Gear wheels - Electric motor (new brake, new bearings) The machine is stored in our warehouse and can be inspected under power. The attached images are original photos of the machine. The machine is CE marked. The CE marking corresponds to the status as of 1998 (first overhaul).

Year of construction: 1988, condition: used, functionality: fully functional, PAAL RS 40/250 paper roll saw, Manufactured by Paal’s Packpressen-Fabrik in Germany. The machine is designed for cutting paper rolls and is suitable for industrial paper processing applications. Technical specifications: Manufacturer: Paal’s Packpressen-Fabrik Model / Type: RS 40/250 Year of manufacture: 1988 Machine number: 24458 Motor power: 17 kW Rated current: 34 A Voltage: 380 V Frequency: 50 Hz Weight: 2,350 kg Condition: Used Price: €7,000 The machine is available for inspection. Category: Paper, cardboard & foil processing machinery → Cutting machinery Pgsdpfx Aijxu A U Do Teu Keywords: PAAL RS 40/250, paper roll saw, paper roll cutting machine, roll cutting machine, paper processing machinery, Paal’s Packpressen-Fabrik, paper rolls.

Condition: like new (used), Year of construction: 2017, GUK RS 21/070 Roller Folding Machine This automatic machine is an add-on unit for packaging lines. Suitable for brochures with 4 folding pockets. Technical data: Folding unit: 210 mm feed width Output up to 300 sheets/min Min. format (W x L): 60 x 105 mm Max. format (W x L): 210 x 340 mm Manufacturer: GUK Year of manufacture: 2017 Pedpfeyuybpex Ai Tjgu Space requirement: 130 x 70 x 80 cm

Condition: good (used), Year of construction: 2009, Multrip saw for grooving foam/plywood/MDF/composite Pjdpfx Aijz Ii N Es Tjgu Maximum working width : 2500 mm Maximum cutting hight : 50 mm Infeed conveyer table with adjusteble speed Has been used for cutting tracks in foam, for the inner core in windmill wings ( so the foam can bend in any angle ) Can be used to cut tracks/grooves in plywood/MDF/composite/simillar.

Condition: good (used), Year of construction: 2012, operating hours: 30,006 h, functionality: fully functional, Screw compressor, manufactured by RENNER Type RS 11-10, year of manufacture 1995 Type RS-Top 15, year of manufacture 2012 Refrigerant dryer, year of manufacture 2022 Technical data for oil-injected screw compressor, type RS 11-10 Manufacturer: RENNER Type: RS 11-10 Year of manufacture: 1995 Delivery rate: 1500 l/min Max. operating pressure: 10 bar Motor power: 11 kW Technical data for oil-injected screw compressor, type RS-Top 15 Manufacturer: RENNER Type: RS-Top 15 Year of manufacture: 2012 Delivery rate: 1960 l/min Max. operating pressure: 10 bar Motor power: 15 kW Technical data for associated refrigerant dryer (compressed air dryer) Manufacturer: RENNER (produced by Friulair S.r.l.) Type: RKT CQ 0150 Refrigeration circuit: refrigerant Psdjz A Sypepfx Ai Tegu Year of manufacture: 2022 Refrigerant: R134a Filling quantity: 0.25 kg Max. operating pressure: 14 bar Power: 0.40 kW Fuse rating: 10 A All information is subject to change without notice. A demonstration under power is possible at any time in our showroom.

Condition: ready for operation (used), Fanuc A14B-0082-B209-02 Laser power supply SN: P96P09100,used, small traces of use, 100% functional, scope of delivery according to photos Podpfxsmq H S Ts Ai Tsgu

Condition: used, functionality: fully functional, USED RS TANGENTIAL GRINDER. Pjdjzh E Efopfx Ai Tegu

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Risco RS 750 Twin-Shaft Paddle Mixer Manufacturer: Risco S.p.A. Model: RS 750 Serial number: 1205004 Year of manufacture: 2007 Power supply: 400 V, 3 phase, 50 Hz Power: 7.8 kW Capacity: 750 l Weight: 1010 kg Dimensions: 2760 × 1170 × 1720 mm Psdpfox E Darsx Ai Tjgu The Risco RS 750 twin-shaft paddle mixer is a robust and reliable machine designed for industrial food production. Equipped with two counter-rotating shafts with paddles, it ensures intensive yet gentle and uniform mixing of various masses – meat, vegetable, cheese or confectionery. With a large 750-litre capacity, it is ideal for medium and large-scale production facilities. The construction offers stable operation, high efficiency and consistent mixing results. The unit is designed for ease of use and for integration with processing lines.

Condition: used, machine/vehicle number: 10460, Rotor diameter = 400 mm Podo Admchspfx Ai Tjgu Rotor width = 600 mm Number of rotor blades = 5 Number of stator blades = 2 Drive power = 30 kW

Condition: good (used), Year of construction: 2008, Ref. -No.: 10581 Manufacturer: HEDELIUS Type: RS 80 Magnum Year of construction: 2008 Type of control: CNC-Steuerung Control: HEIDENHAIN iTNC 530 Storage location: Halberstadt Country of origin: Germany X-Travel: 945 mm Y-Travel: 800 mm Z-Travel: 600 mm C-Axis: 360.000 x 0,001 ° Spindle Taper: ISO 40 Table Load: 600 kg Tool changer: 30 fach Spindle Speed: 10 - 8000 RPM Drive Capacity - Spindle Motor: 27 kW Total Power Requirement: 55 kW Pgodpfx Aiszc D Agj Tsu Weight Of The Machine Ca.: 16 t A-axis (swivel axis): ° Table clamping area: 800 x 630 mm Further information: - Pendulum machining with swivel rotary table and fixed machine table - Coolant system, chip conveyor - Complete housing The machine can be viewed under power by arrangement.

Condition: good (used), Code: 0503 Brand: SAC - ITALY Model: RS 53 - CE Standard Automatic thickness planer for joinery workshops, furniture factories, custom furniture, sawmills, wood, composite materials, plastics - CE Standard Technical data Working width mm 530 Max working height mm 240 Min working height mm 3 Max depth of cut mm 8 N° 4 knives Feed speed mt/min 5 - 7,5 - 10 - 15 Motor Hp 5,5 Pgodpfs Aa Ayzex Ai Tju Diameter of suction connection mm 140 Overall dimensions mm 930 x 1050 x 1100 h Weight kg 970

Condition: used, Year of construction: 2017, COMPLETE HOOKAH TOBACCO PACKAGING PLANT - TWO LINES + MIXING EQUIPMENT Fixed package: two complete, lightly used hookah (shisha / molasses tobacco) packaging lines with all support equipment, sold together as one lot at one price: - 50g line: up to 120 packs per minute, built 2017, European (mainly Italian) machinery - 250g line: up to 40 packs per minute, built 2018, U.S. and European machinery - Barrel mixing, barrel loading and storage equipment, spare parts and dosing screws Each line runs from bulk tobacco feeding through dosing, flow-pack sealing, check weighing, cartoning and film wrapping. The lines were used from 2017-2018 to 2019 and have been idle since 2020. Location: Gaithersburg, Maryland, USA. Available for inspection by appointment. Reason for sale: the owner stopped plans for U.S. tobacco production because of FDA regulatory requirements. The equipment is not being sold because of any fault. LINE 1 - 50g LINE - UP TO 120 PACKS PER MINUTE (BUILT 2017) 1. Main control cabinet (HMI + PLC) - synchronizes the complete line 2. Manual loading table and feed hopper with twin augers 3. Dosing machine - GB Automazioni (Italy), screw/auger dosing 4. Horizontal flow-pack machine - sealed 50g pouches 5. Inline checkweigher 6. Cartesian robot loader 7. Stepper (indexing) conveyor 8. Case box machine (cartoner) with its own control panel 9. Carpet transfer conveyor 10. Box wrapping machine - film overwrap of each carton 11. Superimpose box unit - carton grouping and stacking 12. Case cross box machine - GB Automazioni (Italy) 13. Overwrapping cross machine - film overwrap of carton bundles 14. Roller exit conveyor LINE 2 - 250g LINE - UP TO 40 PACKS PER MINUTE (BUILT 2018) 1. Material feed hopper 2. Dosing machine - GB Automazioni (Italy) 3. Horizontal flow-pack machine - Delfin 4. Inline checkweigher - Mettler Toledo 5. Stepper conveyor 6. Case box machine (cartoner) 7. Carpet transfer conveyor 8. Box wrapping machine - Barrington Packaging Systems (USA) MIXING AND STORAGE EQUIPMENT (INCLUDED) - 2 barrel mixing / tumbling machines with control panels - Barrel loading machine (lift and tipper) - Blue storage barrels - Stainless steel storage tubs with lids SPARE PARTS (INCLUDED) Pgjdpfx Asz Rtwaei Tsu - Interchangeable dosing screws in several sizes (for setting pack weight) - Spare parts and stainless steel fittings ELECTRICAL AND UTILITIES - 50g line: 220V / 60Hz, 3-phase + PE, approx. 22.5 kW total across 7 supply points (see layout drawing) - 250g line: electrical details available on request - Pneumatic components: compressed air supply required - The equipment has been operated on U.S. 60Hz power DOCUMENTS AVAILABLE - Brochure for each line - 50g line layout drawing with power supply schedule - Additional photos - Videos of the lines running in production and recent walk-arounds PRICE AND TERMS - USD 550,000 for the complete package as described (both lines + mixing and storage equipment + spare parts) - Sold as-is, where-is (EXW Gaithersburg, Maryland) - Buyer arranges rigging, crating and shipping unless otherwise agreed - Inspection welcome: in person, by video call, or by a third-party inspector

Condition: refurbished (used), functionality: fully functional, Year of construction: 2023, input voltage: 400 V, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580 kg Overhauled: 3/2023 by Wiemers AG General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4, with current “CE” certification Pulling force: 40 kN (4,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / Working area: 540 x 340 mm / 450 x 250 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,350 mm x 900 mm x 1,000 mm (with splash-guard cabin) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special equipment: - Drive with 2 speeds - Safety door with interlock and chip chute - Chip chute with tool storage - Electric clamp jaw sensing (tool removal monitoring to prevent unintentional retraction of the drawbridge) - Integrated coolant system with solenoid valve (controlled via swing system) Pedpfsw H Dgnex Ai Tegu - Patented coolant/lubricant swiveling system - Externally adjustable tool length setting system (reproducible across multiple machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided enclosed splash guard cabin with tool storage (ideal for profile broaching) - External control panel (connected via Harting plug connector) Remarks: The machine has been completely overhauled, the machine body thoroughly reconditioned. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals replaced The coolant system (pump, check valve, and drain valve) including coolant/lubricant swing system is new - Coolant supply is controlled via a solenoid valve, which can be switched over by the swing system - The drawbridge as well as the clamping jaws and rack segments are new - A deactivatable clamping jaw detection system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal display, and door lock - The tool length adjustment system has been relocated outside the machine compartment - Additional end-position limit switches have been installed - Complete new electrical system (control cabinet) - No PLC installed, machine is electrically maintenance-friendly - New drive motor (SEW Germany) with brake - The machine has been freshly painted with 2-component structural paint General The dual spindle drive ensures smooth, centralized pulling force and consistent broaching speed (broaching speed selectable: 3 m/min or 6 m/min). By design, the machine is quick and simple to set up for broaching with flat broaching tools for keyway cutting. Thanks to the universally constructed design of the drawbridge and machine table, operation with both profile and flat broaching tools is possible without the need for additional drawheads.

Year of construction: 2018, condition: excellent (used), Record Scorpion BS RS Medium Flow Wrapper Bottom-seal horizontal flow pack machine designed for small-to-medium products, reaching speeds up to 120-240 ppm. It is known for its compact size, robust mechanical construction, and user-friendly operation. Key Features Performance: The Scorpion BS RS manages 120 (up to 240 in some configs) packages per minute. Structure: This machine features a bottom seal system suitable for fragile or heavy items. Capacity: It handles products up to 750 mm wide and 120-160 mm high. Purpose: Ideal for food and non-food, including irregular or delicate items, utilizing high technology for medium speed. Pjdoywzhkspfx Ai Tegu The machine is often used for items like fresh produce, bakery products, or cheese, where a secure, bottom-sealed wrap is necessary.

Condition: good (used), Year of construction: 1990, For sale is a used SAC RS-53 thickness planer with a maximum planing height of up to 240 mm. The machine is in good condition and has been overhauled and inspected by our specialist personnel. Technical specifications: - 4-knife cutterhead - Planing width: 530 mm - Max. pass-through height: 240 mm - 4 feed speeds - Suction port Ø 140 mm - Motor power: 4 kW / 5.4 HP - Year of manufacture: 1990 Pgjdpfx Aioyh Arhs Teu The planer is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Related terms: planer, thicknesser, thicknessing machine, reference: R-G00 V0

Condition: used, Year of construction: 2010, operating hours: 29,900 h, functionality: fully functional, machine/vehicle number: 21470, power: 45 kW (61.18 HP), volume flow: 390 m³/h, operating pressure: 10 bar, pressure (max.): 10 bar, Equipment: refrigerant dryer, type plate available, Renner RS 45 Screw Compressor - Fully functional, regularly serviced and inspected up until removal Pgodpfx Aieykn Ehj Tsu

Condition: used, Year of construction: 2015, Working condition reflow oven. Pgodpfx Aex Tq I Sei Teu Ask for additional information!

Condition: new, Year of construction: 2023, For sale: a new, unused SPANEX SHB RS 55–70 briquetting press, manufactured in 2023. The package includes a separate intermediate hopper designed to feed wood chips and dust from an extraction system into the press. The press was purchased for our own production facility but was never installed or commissioned. It is stored disassembled on pallets, as shown in the actual photographs. The intermediate hopper is a separate unit, approximately 1.5 × 1.5 m. Included in the sale: • SPANEX briquetting press • Hydraulic unit and control cabinet • Intermediate hopper Technical information: • Briquette diameter: Ø 70 mm • Published output for the SHB RS 55–70 series: 50–90 kg/h, depending on the material • Custom configuration with a more powerful motor than the standard series specification The actual output of this particular configuration has not been tested. The exact installed motor rating can be confirmed from its nameplate. The first gallery image is a concept visualization showing a possible installation beneath a dust extraction unit. The remaining images show the actual equipment offered for sale. Psdpfx Aioz Eqfce Tegu The large dust extraction unit is not included. Connections and installation will need to be adapted to the buyer’s system. The equipment is located in Latvia and can be inspected by appointment. We can assist with loading and transport arrangements.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, For sale is a high-quality Renner RS Pro 22 screw compressor, including a refrigerant dryer. The system is of German quality manufacture and is ideally suited for craft businesses, carpentry shops, metal construction, industry, and workshops with higher compressed air requirements. The additional refrigerant dryer ensures dry and clean compressed air, which extends the service life of machines and pneumatic tools. Technical data: Manufacturer: Renner GmbH Model: RS Pro 22 Year of manufacture: 2019 Type: 3440 Motor power: 22 kW Voltage: 400 V Frequency: 50 Hz Phases: 3~ Delivery rate: 3,440 l/min Max. operating pressure: 10 bar Made in Germany CE version Equipment: Screw compressor Integrated refrigerant dryer Soundproof enclosure Industrial version Three-phase connection 400 V Maintenance-friendly design High air output Suitable for continuous operation Application areas: Carpentry Joinery Metal construction Automotive workshops Industry Craft businesses Scope of delivery: Renner RS Pro 22 screw compressor Pgedpfjzfi Dtox Ai Tju Refrigerant dryer Accessories as per scope of delivery Condition: Used - but with few operating hours - see photo Oil change performed New drive belts Functional Signs of wear and tear consistent with age and use Ready for immediate use The machine will be inspected before sale. For used machines manufactured in 2009 or earlier, the warranty is excluded when sold to commercial customers. Technical data and equipment may vary. Errors, prior sales and changes are subject to change. All information without guarantee.

Condition: used, Year of construction: 2003, functionality: fully functional, Siemens Sinumerik 840D control system includes: grinding media preparation, hydraulic unit, and portal loading system for loading and unloading the machine Technical data: Center distance: 600 mm, center height: 180 mm maximum grinding diameter: 355 mm maximum workpiece weight: 150 kg maximum Z-axis speed: 11 m/min minimum Z-axis speed: 0.01 m/min maximum X-axis speed: 7.5 m/min minimum X-axis speed: 0.01 m/min External cylindrical grinding spindle: Grinding wheel standard (outer diameter x width x inner diameter): 600 x 80 x 304.8 mm Pgedpfx Aijzh Uvao Tou Grinding wheel peripheral speed: 5 - 50 m/s Power consumption of grinding spindle motor: 11 kW Workpiece spindle: Taper bore of workpiece spindle stock: MK 5 Power consumption: 2.7 kW Tailstock: Taper bore of center: MK 4 Coolant tank: 2000 liters, lubricating oil: 30 liters, hydraulic oil: 60 liters Operating voltage: 400 volts, 3 phases Mains frequency: 50 Hz Total machine weight: approx. 5800 kg Operating sound pressure level: 70 dB (A)

Condition: used, Year of construction: 2003, functionality: fully functional, Control system: Siemens Sinumerik 840D Includes: Grinding media preparation, hydraulic unit, and portal loading system for loading and unloading the machine. Psdpfezh Ux Iex Ai Tjgu Technical data: Center distance: 600 mm, Center height: 180 mm Maximum grinding diameter: 355 mm Maximum workpiece weight: 150 kg Maximum Z-axis speed: 11 m/min Minimum Z-axis speed: 0.01 m/min Maximum X-axis speed: 7.5 m/min Minimum X-axis speed: 0.01 m/min External cylindrical grinding spindle: Grinding wheel standard (outer diameter x width x inner diameter): 600 x 80 x 304.8 mm Grinding wheel peripheral speed: 5 - 50 m/s Power consumption of grinding spindle motor: 11 kW Workpiece spindle: Taper bore of workpiece spindle: MK 5 Power consumption: 2.7 kW Tailstock: Taper bore of center: MK 4 Coolant tank: 2000 liters, Lubricating oil: 30 liters, Hydraulic oil: 60 liters Operating voltage: 400 volts, 3 phases Mains frequency: 50 Hz Total machine weight: approx. 5800 kg Operating sound pressure level: 70 dB (A)

Condition: used, Year of construction: 2010, machine/vehicle number: 1000017741, inner dimension length: 1,000 mm, inner dimension width: 840 mm, inner dimension height: 815 mm, operating temperature: 1,700 °C, usable tank capacity: 685 l, No minimum price – guaranteed sale to the highest bidder! The machine was professionally dismantled and stored. All parts and connections are labeled for reassembly. An on-site inspection is possible at any time. TECHNICAL DETAILS Furnace chamber and usable space Usable batch space (W × H × L): 840 × 815 × 1,000 mm Total length of the graphite box: approx. 1,100 mm Usable volume: approx. 685 l Operating temperature: max. 1,700 °C Operating temperature under partial pressure: max. 1,500 °C Operating temperature under vacuum: max. 1,700 °C Temperature uniformity: ± 10 K Temperature fluctuation in the steady state: ± 5 K MACHINE DETAILS Process pressure range: 1 × 10⁻² < p < 1,040 mbar Final pressure in the empty, clean, and cold furnace: < 1 × 10⁻² mbar Leak rate: < 5 × 10⁻³ mbar·l/s Power supply: 3 × 400 V, 50 Hz Permissible voltage fluctuation: max. ± 5 % Installed heating power: max. approx. 190 kW Electrical power of the pump station: approx. 14 kW Pjdpfxsz I Tt Is Ai Tegu Cooling water flow rate: approx. 150 l/min Cooling water temperature: 20–30 °C Cooling water pressure: 2–4 bar Cooling water quality requirements: according to specification PW 800 943 ND Compressed air for valve operation: 4–5 bar Nitrogen inlet pressure: 5–7 bar Hydrogen inlet pressure: 5–7 bar EQUIPMENT Double-walled furnace chamber made of stainless steel with water cooling Internal graphite box for precise guidance of the process gases Post-cleaned graphite components Automatic control of the entire process Pump station Labeled lines and connections for easier recommissioning Note: Two internal graphite heating elements were damaged during dismantling and must be replaced.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Log scanner with belonging electric-operating equipment and operators chair *Is a high-performance scanner. The system will operate at very high line speeds, making it the perfect choice in a modern sawmill. Pedpfx Aist Irffe Tsgu • Provides a true image of log ovality, taper and sweep. Damage and knots are registered and taken inti consideration. • Can be used at all log measuring positions. Log sorting, log optimisation and log turning in the saw line. • Can measure bark thickness. The RS-Bark add-on can calculate the actual log shape under bark. The function can be used in combination with log pattern sorting in the log sorting line to reduce the need of diameter-based log classes. • Minimal need for calibration and service. Easy to calibrate and no need for supplier expertise in case of replacement

Condition: ready for operation (used), functionality: fully functional, total height: 1,840 mm, total length: 1,700 mm, total width: 1,750 mm, type of input current: three-phase, overall weight: 1,850 kg, travel distance X-axis: 490 mm, travel distance Y-axis: 130 mm, travel distance Z-axis: 115 mm, grinding spindle motor power: 2,200 W, input voltage: 400 V, spindle nose: HSK 63, Tool grinding machine EWAG RS15 Pgsdozz Rtuspfx Ai Teu TECHNICAL CHARACTERISTICS: Stroke X axis: 490 [mm] Stroke Y axis: 130 [mm] Stroke Z axis: 115 [mm] Grinding spindle motor power: 2.2 [kW] B axis swivelling stroke: 260 [°] Workpiece spindle nose: HSK 63 Variable power feeding: Yes Digital read out: RSF-Elektronik Number of axes Digital Read Out: 3 Lubrication tank capacity: 100 [l] Centralized lubrication: Oui Supply voltage: 400 [V] Dimensions: 1700 x 1750 x 1840 [mm] Weight: 1850 [Kg] INCLUDED EQUIPMENT: x1 EWAG dividing head (HSK63 tapper) x1 cross table x1 FR15 adjustable-speed grinding spindle drive x1 OR15 adjustable X-axis oscillator (oscillation frequency: 0–68 min⁻¹) x1 mounting unit for PRO15M metric projector (measuring travel: 150 mm) x1 MARCEL AUBERT Ø150 mm profile projector Machine visible under power in our premises by appointment. Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed. Machine for sharpening tools, milling cutters, taps and drills. Machine similar to brands Blohm, Elb, Ewag, Favretto, Fenix, Ger, Jones & Shipman, Jung, Karstens, NUMAFFUT, Okamoto, Okuma, Saacke, SMP, Studer, Vollmer, Walter; also consider cylindrical or surface grinding machines, lathes, machining centres and milling machines.