Used Safan Safan E-Brake B 50-2050 for sale (100,693)

Condition: excellent (used), Year of construction: 2005, ENGEL VICTORY 2050/300 POWER injection molding machine Year of manufacture: 2005 Serial number: 155108 Control system: ENGEL CC200 Operating hours: approx. 88,000 h Design: columnless – Tie-Bar-Less Drive: hydraulic Clamping unit Clamping force: 3000 kN / 300 t Clamping system: ENGEL POWER – hydraulic, columnless Opening stroke: 900 mm Minimum mold height: 350 mm Maximum daylight opening: 1250 mm Dimensions of mounting plates: 1100 × 1000 mm Injection unit Injection unit: 2050 Screw diameter: 70 mm Injection volume: 1155 cm³ Injection weight for PS: approx. 1050 g Maximum injection pressure: approx. 1700 bar Screw L/D ratio: approx. 20:1 Control and equipment Control system: ENGEL CC200 Interface / robot preparation: yes Robot: none Hjdpfx Aezvdbuokronu Hydraulic core control: 2 circuits Central lubrication system: yes Hydraulic oil cooling: yes Power supply Voltage: 400 V Frequency: 50 Hz Dimensions and weight Machine length: approx. 7300 mm Machine width: approx. 2200 mm Machine height: approx. 2500 mm Machine weight: approx. 20,400 kg

Condition: good (used), Year of construction: 2005, power: 7.5 kW (10.20 HP), pressing force: 120 t, stroke length: 1,000 mm, operating speed: 10 mm/s, reverse speed: 120 mm/s, throat depth: 400 mm, clearance between the columns: 2,550 mm, total length: 5,700 mm, total width: 1,800 mm, total height: 3,100 mm, overall weight: 9,650 kg, Equipment: documentation/manual, Press brake SAFAN - H-Brake 120TS1 MACH-ID 9820 Make: SAFAN Type: H-Brake 120TS1 Control: TS1 YOP: 2005 Max. bending length: 3100mm Distance between column: 2550mm Max. pressing force: 120T Dis. Beam - Table: 470mm Beam stroke: 180mm Troth beam: 400mm Approch speed: 200mm/min. Working speed: 10mm/min. Return speed: 120mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: Y1 / Y2 / X/ Z1 / Z2 / R-Central Control: TS1 Hnedjz Hka Aopfx Akreu Crowning: Yes Hydraulic toolclamping: Yes Power: 7.5kW Length: 5700mm Width: 1800mm Height: 3100mm Weight: 9650kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: unexamined, Servo drives for press brakes. Used condition, removed from operational machines. Untested. Hjdex Dr Daopfx Akrenu Please request further details and photos. We can purchase your faulty press brake.

Condition: good (used), Year of construction: 2015, sheet width 2050 mm plate thickness 3.0 mm distance between columns 2100 mm back stop - adjustable 550 mm no. of strokes 35 Hub/min cutting angle 2°12 table width 400 mm table height 850 mm Control konv. total power requirement 3.0 kW weight of the machine ca. 1280 kg dimensions of the machine ca. 2400 x 1500 x 1300 mm Current list price: approx. 20.000 euros From a maintenance workshop Features: - Robust / high-performance electromechanical guillotine shear - Manual material backgauge * Continuously adjustable range * Adjustment from the back via handwheel * Includes mm scale * Max. adjustment range: 550 mm - Manual cutting gap adjustment, from the front - 1x side stop with mm scale - 2x support arms - 1x freely movable foot switch - rear sheet metal chute Hedjzd Hb Hspfx Akrjnu - rear safety device (light barrier) - operating instructions (machine control system) - Transport stand (homemade)

Year of construction: 2007, condition: ready for operation (used), Cutting dimensions X/Y: 2000mm/3000mm, Z-axis stroke: 230mm, machine tolerance: +/-0.05mm/m, repeatability: +/-0.025mm/m, simultaneous movement: 56m/min, max. cutting speed: 30m/min, max. material thickness: 200mm, max. load capacity: 790kg/m², max. workpiece weight: 4740mm, max. clamping material thickness: 50mm, max. pump pressure: 3800bar, max. working pressure: 3600bar, machine weight: approx. 11300kg, working hours: 18111h. Documentation available. An on-site inspection is possible. Hjdpfx Aoyttwuokrjnu

Condition: used, functionality: fully functional, machine/vehicle number: 516029002148, Year of construction: 1999, operating hours: 6,424 h, load capacity: 5,000 kg, lifting height: 4,200 mm, free lift: 1,400 mm, fuel type: electric, mast type: triplex, construction height: 2,220 mm, empty load weight: 6,828 kg, drive type: Elektro, Electric 4-wheel forklift Chassis number: 516029002148 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully functional Technical condition: very good Front tire condition: 40 - 60% Rear tire condition: 80 - 100% Battery voltage: 80V Battery Ah: 930Ah Battery manufacturer: SBS Battery type: PzS Battery year of manufacture: 2019 Battery condition: 80 - 100% Description: German Still R60-50 No.: R0828 Year of manufacture: 1999 Operating hours: 6,424 h Lifting capacity: 5,000 kg Lifting height: 4200 mm Mast: Triplex Free lift: 1,580 mm Version: Container-capable Battery: 80 V / 930 Ah, year 2019, manufacturer SBS Battery condition: 80–100 % Equipment: Side shifter, 3rd and 4th hydraulic valve, front and rear work lights, and load backrest. Condition: Ready for use and fully functional Optical condition: good Technical condition: very good Charger available upon request. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. English Still R60-50 No.: R0828 Year of manufacture: 1999 Operating hours: 6,424 h Lifting capacity: 5,000 kg Lifting height: 2,800 mm Mast: Duplex Free lift: 1,580 mm Version: Container suitable Battery: 80 V / 930 Ah, year 2019, manufactured by SBS Battery condition: 80–100% Equipment: Side shift, third and fourth hydraulic valve, front and rear work lights, and load backrest. Condition: Ready for use and fully functional Optical condition: good Technical condition: very good Charger available upon request. Fast and uncomplicated transport can be arranged upon request! This advertisement is intended solely for the identification of the machine. A detailed description of its condition and possible equipment is available individually upon request. Errors and prior sale reserved. Sale exclusively to commercial customers. All used equipment is sold without warranty or guarantee. Should you not have found the right machine, please contact us. We have a large selection of additional equipment available on site. Side shifter, 3rd valve, 4th valve, rear work light, front work light, load backrest. Hedsz Dcm Aopfx Akrjnu

Condition: used, Double-column hydraulic press SCHÖN Type UTE/B 50 Machine No. 5509 Year of manufacture: 1971 Pressing force: 50 tons Column span: 550 mm Column clearance (side): 150 mm Table size: 480 x 380 mm T-slot width in machine table: 18 mm Table opening: Ø 70 mm Ram area: 490 x 280 mm Clamping pin bore: Ø 40 mm Max. ram stroke: 150 mm Max. installation height: 390 mm Table height above floor: 890 mm Rapid approach speed: approx. 130 mm/sec Working speed: approx. 20 mm/sec Return speed: approx. 130 mm/sec Motor power: 4 kW Power supply: 380 Volt, 50 Hz - Stepless pressing force adjustment Hnsdpfx Aev Srfwskreu - Rapid and working stroke - Pressure or stroke-dependent stroke limitation - Adjustable pressure holding time, press time extension 0.5–6 s - Mechanically adjustable hard stop via handwheel on ram - SICK light barrier, Type LVU - Stroke counter - Double column guide on ram Space requirement (L x W x H): 1100 mm x 1050 mm x 2320 mm Weight: approx. 1.5 tons Good condition

Year of construction: 2020, condition: ready for operation (used), A comprehensive machine package for textile processing, automatic cutting, laser cutting, industrial sewing operations, punching and riveting is offered. 1) CNC cutting table Atom FlashCut 222, year of manufacture 2020, machine weight: approx. 650kg, the machine will be available at the end of 2026. 2) CO₂ laser cutting and engraving machine Trotec Rayjet 50 with associated extraction system, working area: approx. 457mm/305mm, laser power: 30W, max. processing speed: approx. 1.5m/s, Aigner/Trotec Atmos Cube extraction system, year of manufacture: 2020, airflow: 320m³/h. 3) Single-needle lockstitch flatbed machine with triple feed and large vertical hook Dürkopp Adler 867 ECO, subclass 867-190020-M, max. stitch length: approx. 9mm, clearance: approx. 335mm, clearance height: approx. 125mm. 4) Single-needle high-speed lockstitch machine Juki DDL-9000B-SS, year of manufacture 2019, max. sewing speed: approx. 5000stitches/min, max. stitch length: approx. 5mm, needle bar stroke: approx. 30.7mm. 5) Single-needle high-speed lockstitch machine Dürkopp Adler 261-140342-02, max. stitch length: approx. 5mm, control: AHE59. 6) Post-bed sewing machine Pfaff 591-900/81-BL. 7) 2x identical swing-arm cutting presses Moneus 1333. 8) 5-thread overlock machine Chee Siang Golden Wheel CSK-2516D-03/S35-3x5. 9) Manually operated riveting and setting machine with mechanical foot operation. 10) Rotary screw compressor Kaeser Aircenter SM 13, year of manufacture: 2020, motor power: 7.5kW, max. operating pressure: 11bar, motor speed: 2955rpm, control: Kaeser SIGMA CONTROL 2. Documentation available. Inspection possible by appointment. Hnjdjzt Skxepfx Akrou

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, System consisting of: 1 Welding robot Qirox QRC 350-E including control unit, programming handheld device, 24 V buffer, PC connection on the control cabinet side, 2 GB flash drive from a training system, in like-new condition, manufactured in 2023. Gas nozzle sensor, arc welding seam tracking, multi-layer welding technique, point editor, oscillating patterns, transformation. Qineo Puls 600 with Premium control module, wire feeder, torch hose package, welding torch MRW 510 evo, torch testing gauge, mechanical cleaning, pressure booster. Like-new floor track with a capacity of 20 kN, travel distance 12 m, robot is mounted on a C-shaped stand in a hanging position, manufactured in 2019, 135 operating hours. 2 Rotary positioning device with counter bearing TC 5 kN (no operating hours), load capacity 1000 kg, clamping length 5.0 m. Connection control, 4 light barriers, 2 start pre-selection. Delivery date: upon agreement. The components are in stock and need to be assembled and tested. Warranty: 6 months. Hjdpfxszu Shys Akrsnu

Condition: used, Year of construction: 1998, saw blade diameter 350 mm cutting diameter 110 mm capacity 90 degrees: flat 180 x 85 mm capacity 45 degrees: round 105 mm Hedpfx Akexabzyersnu capacity 45 degrees: flat 130 x 85 mm capacity 60 degrees: round 105 mm capacity 60 degrees: flat 90 x 85 mm turning speeds 9-18-36-74 U/min vice max. 180 mm Control IMET CNC total power requirement 1.5 / 2.2 kW weight 710 kg range L-W-H 2000 x 1100 x 2000 mm Current new price approx. 25.000 euros Special price on request Circular saws are used to cut thin-walled tubes and profiles. Clean, precise cut edges are achieved with the circular saw. Fast sawing and easy miter adjustment are the advantages of the circular saw. Basically, you should also pay attention to the correct cooling of the materials. Cooling lubrication is essential for metallic materials. Cooling lubrication is not required for non-metallic materials such as plastic, brass or cast iron. Choosing the right tooth pitch is decisive for the optimal use of metal circular saw blades. For the material cross-section to be machined in connection with the material quality. Furnishing: - CNC fully automatic / vertically guided metal circular saw - swiveling CNC control, front left * Entry of parameters such as quantities and material lengths - Precision prism guide of the gear head, laterally adjustable - Hydro-pneumatic control of the saw unit - with automatic material feed & quantity specification * electro-pneumatic material feed unit - Smooth-running, powerful worm drive * with large transmission ratio - with miter adjustment via large turntable - continuous saw blade lowering - pneumatic material clamping - Stable base with built-in automatic cooling and large chip drawer - Micro spray device for stainless steel cuts (untested) - Safety device for feed device (hood) - Saw blade guard - User manual (PDF) * Machine link : ?machineno=1008-9164086

Condition: used, Year of construction: 2019, Numerical control with bSolid software The multi-document software application in Windows environment allows the design of the finished product, the definition of its processes, the definition of the work plan, the simulation of the piece machining operations on the 3D model of the machine and generation of the necessary machine programs. bSolid - 3-Axis Machining bSolid - 5-Axis Machining Module for surface machining with 5-axis units and interpolation movements on all 5 available axes (X,Y,Z,C,B). The module includes the following commands: · assignment to surfaces three-dimensional roughing and finishing operations · spread or project a path onto a curved surface machining lying on a plane · follow 2D or 3D curves with any type of tool bSolid - 3D Engraving bSolid - Import external formats Fields of work: X = 5055 mm; Y = 1650 mm (may vary depending on configuration) Z = 200 mm with modules H=74 mm Z = 245 mm with modules H=29 mm Loadable piece in Y: * 1650 mm, with thickness up to 60 mm on H=74 mm modules * 1600 mm, with thickness over 60 mm on H=74 mm modules. 10 ATS floors – 40 trolleys The code includes: • 2 aluminium bars (n. 1 left and n. 1 right) on which the lateral stops slide. • 10 aluminum worktops. The worktops slide on hardened and ground linear guides using recirculating ball bearing slides. Locking occurs on both linear guides, front and rear, by means of four pneumatic cylinders. The control is activated by a button located in front of the work surface. The carriages slide on steel guides positioned above the extrusion. Pneumatic locking system divided into 2 locking zones in X Automatic positioning (EPS) for worktops. "EPS" (Electronic Positioning System) device for the automatic positioning by NC of the work surfaces and trolleys complete with locking devices capable of eliminate possible operator errors. Rear row stop, with 140 mm stroke Intermediate row stop, positioned at 405 mm, with 140 mm stroke. Front row stop, positioned at 1460 mm, with 140 mm stroke 4 lateral stops, with 140 mm stroke (2 right + 2 left) with system 2 additional side stops, with 140 mm stroke (1 right + 1 left). Sensor for checking whether the stops have descended 12 clamping devices for clamping narrow workpieces 6 loading aid bar lifts, for H=74 mm modules Configuration 5A, for Rover B. Configuration for high productivity and flexibility, thanks to the two operating groups 4 and 5 axes and the possibility of performing tool changes in concurrent time. It includes the axes and carriages for the movement of the main operating groups. Includes 2 inverters. Second Y-axis. Introduces the separation of the front and rear Y-carriages, with independent motorization. The two Y-carts have a maximum speed of 118 m/min. 13.2 kW (17.7 HP) electrospindle, HSK F63 connection, air-cooled. Main features: • 11 kW (14.7 HP) from 12,000 to 15,000 rpm in S1 service. • 13.2 kW (17.7 HP) from 12,000 to 15,000 rpm in S6 service. • Bearings ceramics. • Right and left rotation. • Rotation speed from 1,000 to 24,000 rpm programmable by NC. • The release pneumatic operation is carried out via a prismatic linear guide and recirculating ball bearings. A cover is included for chip extraction, with 6 different positions in Z managed by the NC, depending on the length of the tool, or by program. The suction mouth is automatically closed when the electrospindle is not working. Provision for subsequent installation of the 360° operating group (C-axis) Revolver tool maga... Hsdjw D E A Espfx Akronu

Condition: used, functionality: unexamined, For press brakes: Used servomotors of various types, encoders, linear scales, servodrivers. Please specify the type and send photos. We will buy your worn press for spare parts. Hnsdpfx Akex Dr U Eorju

Condition: used, Year of construction: 2018, functionality: fully functional, Schneider Electric Masterpact NW32HF 3200 A four-pole drawout switch-disconnector, supplied with its matching withdrawable cradle/chassis. Heavy-duty low-voltage switching device suitable for use as a main incomer, bus-coupler or isolating switch in industrial distribution boards, generator systems, data centres and other high-current electrical installations. This is a switch-disconnector, not a circuit breaker with an electronic protection trip unit. The photographed configuration corresponds to the Schneider Masterpact NW32HF 4-pole, 3200 A drawout version. Technical details Manufacturer: Schneider Electric Series: Masterpact NW Model: NW32HF Schneider reference: 48321 Equipment type: Switch-disconnector / isolator Rated current: 3200 A Number of poles: 4 Version: Drawout / withdrawable Rated operational voltage: 690 V AC Frequency: 50/60 Hz Rated insulation voltage, Ui: 1000 V Rated impulse withstand voltage, Uimp: 12 kV Rated short-time withstand current, Icw: 85 kA / 1 second Rated short-circuit making capacity, Icm: 187 kA peak Utilisation category: AC-23A Standard: IEC 60947-3 Manual Push ON / Push OFF operating mechanism Rear high-current terminal connections Withdrawable cradle/chassis included Hnsdpfozlivpex Akreu Schneider identifies reference 48321 as a 3200 A, 690 V, four-pole drawout Masterpact NW32HF switch-disconnector

Condition: good (used), Year of construction: 1991, operating hours: 49,637 h, functionality: fully functional, machine/vehicle number: 9666, ram adjustment: 64 mm, conveyor belt width: 203 mm, pressing force: 50 t, control cabinet length: 940 mm, control cabinet width: 760 mm, stroke length: 1,651 mm, input voltage: 380 V, overall weight: 9,000 kg, control voltage: 24 V, sheet thickness steel (max.): 4 mm, input frequency: 50 Hz, sheet thickness aluminum (max.): 4 mm, Technical Data Manufacturer: BRUDERER AG Model: BSTA 50 EL CNC Machine Type: CNC High-Performance Punching Machine Year of Construction: 1991 Machine Number: 9666 Press Force: 500 kN (50 t) Connected Load: 40 kW Main Motor Power: 25 kW Supply Voltage: 380 V / 50 Hz Control Voltage: 24 V DC Compressed Air Connection: 6–10 bar Operating Hours: approx. 49,637 h Adjustable Stroke: 16–51 mm Mounting Space/Clamping Plate: 760 x 940 mm Main Drive: 22 kW Power Supply: 400 V / 50 Hz Table Area: 940 x 580 mm Strip Feed Height (adjustable): 50–140 mm Hedpfx Akjzuur Usrenu Max. Strip Width: 203 mm Max. Material Thickness: 4 mm Dimensions of machine with BBV 202: 2390 x 1270 x 3090 mm Machine Weight: approx. 9000 kg Configuration 2 x BRUDERER BBV 202/120 DOUBLE strip feeder KOHLER leveling machine 100.180/2.500.2M, year of construction 1992 Unwinding reel / coil reel Soundproof cabin Conveyor belt for part removal Lifting and sorting device for containers Roller conveyors and stacking racks Technical documentation available Description Complete BRUDERER high-performance punching line consisting of a precision punching machine BSTA 50 EL, BRUDERER strip feeder BBV 202/120, KOHLER leveling machine, unwinding reel, soundproof cabin, and discharge and conveying equipment. The system is designed for the efficient processing of strip material in high-speed punching operations. Extensive technical documentation is available.

Condition: excellent (used), pressure 50 t throat 245 mm stroke 14 / 90 mm ram adjustment 75 mm table height adjustment 150 mm strokes per minute 42/85 table surface area 700 x 490 mm ram surface 400 x 230 mm tool hole in ram 40 mm hole in the table 240 x 140 mm daylight, max. stroke above - ram adjustment above 360 mm total power requirement 4 kW weight of the machine ca. 3,41 t dimensions of the machine ca. 0,8 x 1,75 x 2,1 m Hnjdpfx Aketrhf Aorou Machine was partially overhauled in our house as follows: - disassembly, cleaning and inspection - table milled over - new paintwork of the machine - shaft crack test carried out - disassemble Ortlinghaus clutch and additional brake, clean, check, replaceseals - additional air storage tanks - new control cabinet with safety control and touchscreen display - new wiring of the machine - new Vogel central lubrication system with piping - new Herion press safety valve + maintenance unit - new Balluff cam swith - new 2-hand control panel - new footswitch - Current UVV test with braking time measurement - Machine safe for hand inlay work

Condition: new, Wilo MHI403-1/E/3-400-50-2/B pump, serial number: 4024295, unused, 100% functional, scope of supply as shown in the photos. Hnjdpfjz Adnnox Akrou

Condition: used, Year of construction: 1984, Press force 1,500 kN Hnedpfeyg Ebxjx Akreu Adjustable stroke 20 - 120 mm Ram adjustment max. 85 mm Stroke rate 50 / 75 1/min. Machine weight approx. 8,000 kg Further data and images available on request

Condition: new, Year of construction: 2025, diameter 28 mm length 50 mm clamping range 45-50 mm The price is exclusive of statutory VAT. Also available in D28 x 75 mm (clamping range 70–75 mm). Clamping range: 45–50 mm Type: Ball Lock Pin 50 mm Diameter: 28 ± 0.02 mm Material: 45# steel Hodpfeymf Urox Akronu Hardness: HRC28–32 Surface roughness: Ra 0.8 µm GERD WOLFF ball lock pins are specialized fastening components designed for integration into a wide range of welding table systems and setups. Their main function is the efficient and precise positioning and securing of workpieces. These pins are compatible with welding tables from all manufacturers that feature 28 mm bore holes. The unique ball-lock design enables flexible alignment of workpieces at various angles and positions. Thanks to their high-quality manufacturing and robust construction, GERD WOLFF ball lock pins provide reliable holding force throughout the entire welding process. These pins allow for easy handling, fast clamping, and release of workpieces — without the need for additional tools. GERD WOLFF stands for quality and precision in welding technology. These ball lock pins are engineered to meet the high demands of professional welding applications. Quick release locking pins, quick lock pins, quick releases, quick installation pin, metal horizontal quick release, working pin, quick release locking pin, quick latch pin, locking quick release pins.

Condition: like new (used), Year of construction: 2015, clamping force: 1,200 kN, Engel E-Victory 170H/50V/120 combi (2015) 2k machine CC300 controll Clamping force: 1200 kN Mould min-max: 300mm Total tool max height: 800 mm plate size : 740 x 680mm Opening stroke: 505 mm Ejector stroke: 130 mm Ejector force: 39.8 kN Pump drive power: 15 kW Injection unit 1 Screw diameter: 25 mm Max. swept volume: 59 cm³ Screw speed max: 400 r/min Screw speed max (current): 400 r/min Injection rate: 109 cm³/s Injection rate (increased): 109 cm³/s Specific injection pressure: 2400 bar Specific injection pressure (increased): 2400 bar Injection unit 2 Screw diameter: 20 mm Max. swept volume: 25 cm³ Hnsdpfoxyi Rvsx Akreu Screw speed max: 450 r/min Injection rate: 104 cm³/s Specific injection pressure: 2400 bar Machine with conveyor. Working hours : 41.427 h Possible to buy robot Engel VIPER 20 Linear (Z=3320mm)

Condition: ready for operation (used), Year of construction: 1998, cutting diameter 305 mm capacity 90 degrees: flat 350 x 200 mm capacity 45 degrees: round 250 mm capacity 45 degrees: flat 230 x 200 mm capacity 60 degrees: round 175 mm capacity 60 degrees: flat 170 x 100 mm cutting speed 18 - 110 m/min vice max. 350 mm dimensions of saw-band 3370 x 27 x 0.9 mm engine output 1.5 / 1.8 kW weight of the machine ca. 880 kg range L-W-H 1700 x 2200 x 2000 mm Equipment: - robust, electro-hydraulic fully automatic band saw - user-friendly controls - Mitre cuts left to 45 . possible in automatic mode - Mitre cuts up to 60° . only possible in semi-automatic mode - Hydraulic power unit with automatic Hnedpfx Aeyy A Hyekrsu . pressure cut-off when idling - Stationary base frame * with large chip drawer and automatic cooling system - infinitely variable saw blade speed adjustment (ESC) - rotating chip brush - remnant min. 80 mm - operating instructions (PDF)

Condition: used, functionality: unexamined, control type: NC control, actuation type: electric, Spare parts for early-model press brakes that were no longer needed during modernization. They are in good condition and can be reused in similar systems. These include CNC controllers, X- and Y-axis servo drivers, R- and Z-axis servo drivers, electric motors and encoders, and various circuit boards. Any individual parts are also available for purchase. Identification via photo and serial number. We can also purchase your faulty or unwanted press brake. Hedpfxox Ed H As Akronu

Condition: as good as new (ex-display), Year of construction: 2026, functionality: fully functional, Rebar bending machine / Bending machine B 50 – exhibition model COMPLETE TECHNICAL SPECIFICATIONS – SEE PHOTO - CE marking - Incl. bending pins / stop / bending sleeves - Bending capacity max. 50 mm / diameter (single bar) - Foot switch - Complete documentation Hedpfozvy S Nex Akronu - Bending via program or individual bends Dimensions: L x W x H 1.3 x 0.9 x 1 meter / Weight 500 kg Errors and omissions excepted.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 5,115 h, load capacity: 5,000 kg, lifting height: 4,675 mm, free lift: 1,460 mm, fuel type: electric, mast type: triplex, construction height: 2,360 mm, fork carriage width: 1,350 mm, fork length: 2,400 mm, drive type: Elektro, Electric 4-wheel forklift Load centre: 500 mm Fork width: 130 mm Fork thickness: 60 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Double pedal Technical condition: Good Front tyres type: Superelastic Front tyres size: 345/45-15 Front tyres condition: 40 - 60% Hodsyl A N Djpfx Akrenu Rear tyres type: Superelastic Rear tyres size: 23x9-10 Rear tyres condition: 40 - 60% Battery voltage: 80V Battery capacity: 930Ah Battery brand: Hoppecke Battery type: PzS Battery year: 2021 Battery condition: 60 - 80% Description: Handover with new FEM 4.004 inspection including inspection book. If you have further questions, please feel free to contact us. In addition to this model, we have approx. 150 other industrial trucks in stock. Visit our homepage fleischmann-foerdertechnik. Leasing & financing, as well as delivery on favourable terms, can be arranged upon request. We are also happy to consider trade-in of Linde units – even if you do not purchase a truck from us. Specified operating hours were read at the time of listing. Subject to prior sale, changes, and errors. Sideshift, fork positioner, Durwen fork positioner 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, full free lift, safety light,

Condition: used, machine/vehicle number: 008266, Type of edging: Thin edge, Thick edge Hjdpfx Aksx A Hfijrjnu Gluing System: EVA Hotmelt Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3000 mm Max feed speed: 25 m/min Operating Units Right Side: 9 nr Operating Units Left Side: 9 nr

Condition: used, Year of construction: 1991, Pressing force 1,500 kN Adjustable stroke 20 - 132 mm Ram adjustment max. 90 mm Stroke rate 50 / 75 strokes/min. Further data and images available upon request Used, the press was completely disassembled Not operational and requires mechanical and electrical overhaul Hodpfx Asrm Nqmskronu Press is currently mechanically reassembled