Used Salt Spray Chamber Corrosion Testing Device for sale (24,386)

Condition: used, Weiss   Type: SWT 200/400-S   Weiss spray and splash water test cabinet   This cabinet is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum.   Features Glass door with wiper Pneumatic drive for the swivel nozzle Adjustable swivel angle Replaceable swivel nozzles Nozzle holder is swiveling and replaceable Adjustable water flow rate and measurement   Control of the test duration   Data for mechanical stress Max. load with test specimen (evenly distributed over the surface) Permissible test specimen weight for test specimen holder (total) 25 kg Spray radius 200 mm / 400 mm   Data for IP protection tests Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10°   Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm   Data for operation Voltage: 3/N/PE AC 400V ±10% 50Hz Iiodezii Akopfx Amgjh Rated power 1.5 kW Rated current 6.0 A   Weight: 375 kg   Important note: "The table shown in the photos is not included in the sale."   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: SWT 200/400-S Weiss spray and splash water testing cabinet The cabinet is used to test the ingress of water into enclosures. In combination with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 or EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system reduces water consumption to a minimum. Features: Glass door with wiper Pneumatic drive of the swivel nozzle Adjustable swivel angle Interchangeable swivel nozzles Nozzle holder can be swivelled and replaced Adjustable water flow rate and measurement Control of the test duration Data for mechanical stress: Max. load with test specimen (evenly distributed over the area) Permissible test specimen weight for test specimen carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection tests: Swivel speed approx. 60°/s Swivel angle IPX3 approx. ± 60° Swivel angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Operating data: Iedpfx Amszil T Esgjih Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 KW Rated current 5.0 A Weight: 375 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Year of construction: 2003, condition: used, functionality: fully functional, machine/vehicle number: 59 226 035 580 030, Type: SC/KWT 450 Salt Spray Chamber Technical Data: - Test chamber volume: 450 liters - System weight: 140 kg (test chamber + machine unit; without brine and without test specimens) - Brine reservoir: 180 liters - Maximum load: 100 kg, 8 kg per support rod - External dimensions: Height without hood 920 mm, height with hood 1370 mm, width 1930 mm, depth 800 mm - Test chamber dimensions: Height 740 mm, width 850 mm, depth 570 mm - Control unit: Simcon/32 - Condition: used - Operating hours: 22,914 h Iodpfx Amox Ig Tmegeih Connection Data: - Voltage: 1/N/PE AC 230V ±10% 50Hz - Rated power: 2.0 kW - Rated current: 8.5 A - Power consumption: 450 Wh/h - Brine consumption: approx. 0.5–1 liter per hour - Compressed air consumption: approx. 1.5 m3/h at 0°C and 1 bar - Deionized water consumption: approx. 0.4 liters per hour Application Areas: - Salt spray test in accordance with DIN 50021 - Condensation water test in accordance with DIN 50017 - Standard climate (ventilation): DIN 50014 The system has been serviced and calibrated annually by the manufacturer, with no outstanding repairs (full maintenance contract). Last maintenance/calibration/DGUV3 inspection: 03/2025. The system will remain connected until week 3 and can be inspected during this time. All installation and operating manuals as well as the service manual are available.

Year of construction: 2018, condition: excellent (used), Weiss Technik SaltEvent SC/UKWT 1000 Salt Spray Testing Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: SaltEvent SC/UKWT 1000, with annular spray air Machine Type: Salt Spray Testing Chamber / Climate Change Testing System Test Chamber Volume: 1,028 liters For sale is a used Weiss Technik SaltEvent SC/UKWT 1000 salt spray testing chamber with integrated climate change technology, touchscreen control, and annular spray air system. The system was developed for professional corrosion, salt spray, condensation water, temperature, and climate change testing. It is ideal for testing laboratories, the automotive industry, materials testing, research, and quality assurance. Technical Data: Manufacturer: Weiss Umwelttechnik GmbH Isdpfozzli Rsx Amgsih Type: SaltEvent SC/UKWT 1000 Year of Manufacture: 2018 Test Chamber Volume: 1,028 liters Internal Dimensions (W × D × H): 1,560 × 645 × 720 mm External Dimensions (W × D × H): 2,925 × 980 × 1,370 mm Transport Dimensions (W × D × H): 2,925 × 1,880 × 1,370 mm Weight: 650 kg Mains Connection: 3/N/PE AC 400 V (-10 % / +10 %) 50 Hz Electrical Connection: 3P+N+PE 400 Vac 32 A Rated Power: 9.4 kW Rated Current: 19 A Refrigerant: R134a Refrigerant Quantity: 1.30 kg GWP: 1,430 CO₂ Equivalent: 1.86 t Max. Low Pressure: 17 bar(g) Max. High Pressure: 25 bar(g) Air-cooled version Ethernet interface Testing Ranges: Salt Spray Testing: Ambient temperature +5 °C to +50 °C Condensation Water Testing: Ambient temperature +5 °C to +42 °C Climate Testing: +23 °C to +70 °C Drying / Ventilation: Ambient temperature +5 °C to +70 °C Humidity Range Climate Testing: 20 to 98 % RH Humidity Range Drying / Ventilation: < 30 % RH Dew Point Range: +12 °C to +69 °C Consumption Data: Water Consumption Salt Spray Testing: approx. 0.4 l/h Water Consumption Condensation Water Testing: approx. 34 l Consumption of Spray Solution: approx. 0.9 l/h Compressed Air Consumption Salt Spray Testing: approx. 1.4 m³/h Compressed Air Consumption Ventilation: approx. 7.0 m³/h Temperature Stability: ±1.0 K Equipment: Touchscreen Control Annular Spray Air System Climate Change Testing Function according to VDA 621-415 Salt Spray Testing Condensation Water Testing Temperature Testing Climate Testing Drying and Ventilation Function Air-cooled Cooling System Ethernet Interface Automatic Testing Programs Transport Data: Dimensions (W × D × H): approx. 2,925 × 980 × 1,370 mm Transport Dimensions (W × D × H): approx. 2,925 × 1,880 × 1,370 mm Weight: approx. 650 kg Condition: Used Optical condition according to pictures. Scope of Delivery: Weiss Technik SaltEvent SC/UKWT 1000 Integrated Touchscreen Control Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as pictured. Subject to changes, errors and prior sale.

Year of construction: 2018, condition: excellent (used), Weiss Technik SaltEvent SC/UKWT 1000 Salt Spray Chamber Manufacturer: Weiss Umwelttechnik GmbH Type: SaltEvent SC/UKWT 1000, with annular spray air Year of manufacture: 2018 Machine type: Salt spray chamber / Climate change testing system Test chamber volume: 1,028 liters For sale is a used Weiss Technik SaltEvent SC/UKWT 1000 salt spray chamber with integrated climate change technology, touch control, and annular spray air system. The system was developed for professional corrosion, salt spray, condensation water, temperature, and climate change testing. It is ideally suited for testing laboratories, the automotive industry, material testing, research, and quality assurance. Technical data: Manufacturer: Weiss Umwelttechnik GmbH Type: SaltEvent SC/UKWT 1000 Year of manufacture: 2018 Test chamber volume: 1,028 liters Internal dimensions (W × D × H): 1,560 × 645 × 720 mm External dimensions (W × D × H): 2,925 × 980 × 1,370 mm Transport dimensions (W × D × H): 2,925 × 1,880 × 1,370 mm Weight: 650 kg Power connection: 3/N/PE AC 400 V (-10 % / +10 %) 50 Hz Electrical connection: 3P+N+PE 400 Vac 32 A Rated power: 9.4 kW Rated current: 19 A Refrigerant: R134a Refrigerant quantity: 1.30 kg GWP: 1,430 CO₂ equivalent: 1.86 t Max. low pressure: 17 bar(g) Max. high pressure: 25 bar(g) Air-cooled design Ethernet interface Test ranges: Iedpfxezqab To Amgoih Salt spray test: Ambient temperature +5 °C to +50 °C Condensation water test: Ambient temperature +5 °C to +42 °C Climate test: +23 °C to +70 °C Drying / Ventilation: Ambient temperature +5 °C to +70 °C Humidity range climate test: 20 to 98 % r. F. Humidity range drying / ventilation: < 30 % r. F. Dew point range: +12 °C to +69 °C Consumption data: Water consumption salt spray test: approx. 0.4 l/h Water consumption condensation water test: approx. 34 l Consumption of spray solution: approx. 0.9 l/h Compressed air consumption salt spray test: approx. 1.4 m³/h Compressed air consumption ventilation: approx. 7.0 m³/h Temperature stability: ±1.0 K Equipment: Touchscreen control Annular spray air system Climate change test function according to VDA 621-415 Salt spray test Condensation water test Temperature test Climate test Drying and ventilation function Air-cooled cooling system Ethernet interface Automatic test programs Transport data: Dimensions (W × D × H): approx. 2,925 × 980 × 1,370 mm Transport dimensions (W × D × H): approx. 2,925 × 1,880 × 1,370 mm Weight: approx. 650 kg Condition: Used Optical condition as shown in the pictures. Scope of delivery: Weiss Technik SaltEvent SC/UKWT 1000 Integrated touch control Accessories as shown in the pictures Availability: by arrangement. Scope of delivery as shown in the pictures. Subject to change, errors and prior sale.

Year of construction: 2026, condition: new, functionality: fully functional, usable tank capacity: 5 l, machine/vehicle number: GDI-ECO, Equipment: CE marking, TECHNOMAKS GDI-6000 The TECHNOMAKS GDI-6000 is a high-pressure injector test and cleaning device developed for performing testing, analysis, and professional cleaning operations on injectors used in gasoline direct injection systems. Thanks to its specially designed ergonomic body, aluminum test rail, and durable test chamber, it is suitable for professional service use. The device features 6 special test tubes, each with a capacity of 150 mg, that are resistant to different temperature conditions and have a flexible structure. With the GDI-6000, 1 to 6 injectors can be tested simultaneously. Thanks to its practical connection accessories, injectors can be quickly connected to the system. The special drip and spray observation chamber allows for detailed control of the injector's spray pattern, direction, and leakage. Each test operation can be completed within a maximum of 90 seconds. The device's specially developed electronic pressure measurement system can reach a maximum working pressure of 200 bar. Thanks to tests performed under high pressure, dripping and leakage problems in injectors can be observed more clearly. The integrated printer allows test results to be printed and presented to the customer or relevant organization. 6000+ INJECTOR DATABASE The GDI-6000 has a large database containing reference test values for more than 6000 injectors. The fuel quantity values that the injector should deliver can be viewed on the 7-inch touchscreen. NEW-ENJ+ MODE For injectors not found in the database, the user can create their own test parameters and save new injector information to the system. Iiedpfxsz D S Ezj Amgsh OHM TEST MODE Allows for the control of the electrical resistance values of the injectors. Thus, the OHM values of the injector coils can be measured during the test. AUTOMATIC TEST MODES AUTO-1: 4000 RPM low-speed test AUTO-2: 5000 RPM medium-speed test AUTO-3: 7000 RPM high-speed test By simulating different engine speeds, it enables the comparison of the fuel quantity and spray performance of injectors under various operating conditions. DRIP / LEAKAGE TEST Thanks to the Leaking Out mode, injectors are checked under high pressure. Leakage, dripping, and pressure loss problems in the injector nozzle can be observed. MANUAL TEST MODE RPM, PULSE, and TIMER values can be adjusted manually by the user. Thus, special test scenarios can be created using the desired speed, triggering time, and test time. PROFESSIONAL CLEANING MODES CLEANING 1: Performs pressurized cleaning by operating the injectors at different speeds between 1000–7000 RPM. CLEANING 2: Increases the open time of the injectors, allowing for more intense pressurized cleaning to be applied to the fuel passage channels and injector nozzles. REVERSE FLUSHING: Using special reverse connection accessories, liquid is applied to the injector in the opposite direction. This method ensures that the injector shaft, nozzle, and internal fuel channels are professionally cleaned. ULTRASONIC CLEANING MODE: During the ultrasonic cleaning process, the injectors can be operated in a controlled manner in the 1000–7000 RPM range. In this way, the mechanical operation and ultrasonic cleaning can be performed simultaneously.

Condition: excellent (used), For sale is a professional Vötsch VTL 7010 climate chamber, designed for conducting temperature tests and simulating environmental conditions. The device is used in laboratories, quality control departments, research and development centers, and for testing electronic, automotive, and mechanical components. The chamber is in good working order – the touchscreen starts up correctly and displays the main menu and the current operating temperature, as confirmed by the photos. Technical specifications: Manufacturer: Vötsch Industrietechnik GmbH Model: VTL 7010 Year of manufacture: 2010 Temperature range: -70°C to +180°C Heating/cooling rate: approx. 3.5 K/min Refrigerant: R404A – 0.8 kg R23 – 0.2 kg Power supply: 230 V AC, 50 Hz Rated power: 3.5 kW Rated current: 15.2 A Operating pressure: 8 bar Control via a color touchscreen Working chamber made of stainless steel Door with a viewing window Adjustable internal shelves CE marking Applications The device is ideally suited for: temperature tests, material testing, testing electronics and components, Isdpfxez Snbws Amgjih durability tests, quality control, research and development work. Condition: used, functional, control panel operates correctly, internal chamber is clean and well-maintained, normal signs of wear and tear, sold exactly as shown in the pictures. Included: Vötsch VTL 7010 climate chamber, 2 perforated shelves, built-in control panel.

Condition: good (used), Weiss climate testing chamber with seat pulsator Manufacturer: Weiss Type: SD 1400/+20 DU Test chamber: Material: Stainless steel Dimensions: Height approx. 800 mm Width approx. 2000 mm Depth approx. 900 mm Volume: 1440 liters Outer housing Material: Double-coated Zincor sheet Dimensions: Height approx. 2000 mm Width approx. 2200 mm Depth approx. 2000 mm H x W x D 2000 x 2200 x 2000 mm Paint finish: Light grey (RAL 9002) Door, double-leaf: Hinged on the left and right Equipment: Ijdjxbgrgjpfx Amgeih Pass-through in the floor and ceiling: 2 each, DN 100 mm, for inserting the pulsation tables Pass-through in the side walls: 1 each, left, right, 100 mm Refrigeration unit: Air-cooled Control: Digital measurement and control system DMR Basic control panel: Integrated into the main switch panel Interface: RS 232 C, for connection to a PC Software: Operating software for MS-Windows Performance data: Temperature range without climate control: +20...+100 °C Temperature stability without climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the steady state Temperature range with climate control: 20...+95 °C Temperature stability with climate control: +0.2 … +0.5 K (time-dependent) depending on the range, in the steady state Dew point range: 20...+94 °C Humidity range: 10...98 % RH Humidity stability: +3 ... +5 % RH, depending on the range, in the steady state Temperature change rate measured in the outlet without a test specimen and without a load - Cooling: 0.5 K/min. on average, between +100 and +20 °C - Heating: 0.5 K/min. on average, between +20 and +100 °C The performance data refer to an ambient temperature of max. +25 °C and the specified rated voltage For trouble-free operation of the system, the ambient temperature must be between +10 and +35 °C Connections / Other Protection class: IP 32 for the control cabinet Sound pressure level during free-field measurement at a distance of 1 m in front of the device: 60 dB (A) Humidification water: fully demineralized, conductivity max. 20 μS/cm, pH value 6 - 7, automatic topping up Condensate drain: back-pressure-free, 3/4" hose connection Power connection: 400 V; 3 PH+N PE; 50 Hz Connected load: max. 10 KVA Weight: approx. 1160 kg Seat testing device with steel structure for mounting and securing to the climate testing chamber, including: • 2 pneumatic weight lifting devices (150 mm stroke) for test specimen change, 12 weights each weighing 5 kg • 1 base frame in normal steel welded construction for attachment to the underside of the climate testing chamber. This frame is provided on all sides with removable sheets and has 2 folding doors for adjusting the eccentricity. These doors have safety switches. • 2 eccentric disks with bearings and tachometer, 2 connecting rods, 2 ball guides • 2 mounting tables, perforated, 20 mm grid, 650 x 650 mm, for connecting the test specimens, made of aluminum, thickness min. 10 mm • 2 mounting plates, perforated, 20 mm grid, 200 x 200 mm, for connecting the buttocks replica • 2 load rods, 600 mm long, made of stainless steel (The connection to the test specimen is not included in our price, but can be offered subsequently after a precise definition) • 2 three-phase motors, 2 belt drives with tensioning devices • 1 pneumatic control system with 2 manual valves, one filter-regulator unit and one shut-off valve, 1 electrical control cabinet with 2 SEW frequency inverters, hand switch, emergency stop button, 2 push buttons,

Condition: used, Atlas Xenon Weather-Ometer / Weathering Test Device Atlas Ci3000+ Xenon Weather-Ometer Xenon test device for artificial weathering and light aging For sale is a used Xenon Weather-Ometer from Atlas Material Testing Technology LLC. The device is suitable for weathering tests, light aging, material testing, quality control, research and development, as well as aging tests for plastics, paints, coatings, and materials. Technical data Manufacturer: Atlas Material Testing Technology LLC Type: Ci3000+ Iodpfxozf D Rnj Amgoih Model: Ci3000+ Weather-Ometer Device type: Xenon Weather-Ometer / Weathering Test Device Year of manufacture: 12/2010 Light source: Xenon arc lamp Lamp rated power: 4,500 W Operating range Xenon lamp: 1,700 – 4,500 W Device model according to display: Ci3000+ W Sample sensor 1: Black standard Sample sensor 2: Black panel Light sensor 1: CI 300 – 400 nm Light sensor 2: CI 420 nm Mains connection: 220 / 380 V Frequency: 50 Hz Connection type: 3/N/PE Rated current: 50 A Power consumption: 9.5 kW Control voltage: 24 VDC Compressed air supply required Operating pressure: 80 – 100 PSI (552 – 689 kPa) Compressed air consumption: approx. 4 CFM (0.11 m³/min) Dimensions: approx. 950 x 730 x 1830 mm (W x D x H) Required footprint: approx. 1050 x 2030 mm (W x D) Weight: approx. 404 kg Minimum distance exhaust hood: approx. 102 mm to 152 mm Equipment Touchscreen control panel Xenon burner Test chamber with sample rack Black standard sensor Black panel sensor CI 300 – 400 nm light sensor CI 420 nm light sensor Water-cooled lamp system Exhaust connection Interface connections Integrated humidification system Documentation / Documents as shown in the pictures Accessories / Documents Atlas Weathering Testing Guidebook Atlas Weather-Ometer Auxiliary Filter Lantern Kit Instructions Documentation as shown in the pictures Accessories as shown in the pictures Areas of application Artificial weathering Light aging testing UV and Xenon testing Material testing Plastic testing Paint and coating testing Colors and pigments Textiles Packaging Automotive industry Construction and materials testing Quality assurance Research and development Condition Used Good optical condition Optical condition as shown in the pictures Scope of delivery 1x Atlas Ci3000+ Xenon Weather-Ometer Available accessories as shown in the pictures Available documentation as shown in the pictures The table shown in the photos, as well as any other items not explicitly mentioned, are not included in the sale. Shipping or freight shipping possible. (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Heraeus Atlas Type: Heraeus Atlas Xenotest BETA LM Weathering test device Heraeus Atlas Xenotest BETA is a universal weathering instrument for testing the lightfastness and weather resistance of materials under normal, high-temperature, and high-performance conditions. XENOSENSIV gearbox Control of lamp power in W/m² XENOCHROME 320 35-100 W/m² Specimen chamber temperature up to 80°C, controlled Measurement sensors at specimen level XENOSENSIV E(300-400 nm) Humidification / irrigation Water supply with integrated water tank Specimen chamber temperature: Ambient - 80 °C Black standard temperature: Surface - 130 °C Relative humidity: 10 % - 95 % Electrical version: 3/N/PE AC 400V ± 10 % 50-60 Hz Mains connection: 32A Iodpfszdtkuex Amgsih Power consumption: approx. 12 kVA Rated power of the xenon lamp 2200 VA Power of the xenon lamp 2800 VA Rated current 16A Lamp current max. 20A Dimensions: Width 900 mm x Depth 1200 mm x Height 1800 mm Maximum specimen area 4000 cm² Weight: approx. 400 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Operating hours: 3,888 h, condition: good (used), Heraeus Weathering Test Device Xenotest 1200 CPS Xenon device for testing the lightfastness and weathering resistance of materials under simulated conditions. Rapid exposure device with program control and radiation control. The Xenotest 1200 CPS is equipped with: 3 Xenon lamps NXE 4500 Optional filter system Microprocessor control including data display Simultaneous or alternating/simultaneous operation function Humidity function Iisdpfx Amoxal Haogoh Spraying function Electrical connection Voltage: 400 V Rated current: 50 A max. Connection power: 33 kVA max. Power consumption of the xenon lamps: 2.8 - 6 kW per lamp Compensation: 3 capacitors at 50 uF Operating hours: 3888 Housing dimensions: W x H x D 900 x 1900 x 1700 mm Weight: 800 kg More items – new and used – can be found in our shop! International shipping costs available upon request!

Condition: used, Weiss Type: SWT 200/400 Weiss Spray and Splash Water Test Chamber The chamber is used to test the ingress of water into enclosures. In conjunction with a timer, the test cycle can be automated with an adjustable test time of 3 seconds to 30 hours. Complies with DIN VDE 0470 T1 and EN 60529 for tests according to protection classes IPX3 and IPX4. The integrated circulation system can reduce water consumption to a minimum. Iodpfx Amjzh D Rmegjih Features Glass door with wiper Pneumatic drive for the pivoting nozzle Adjustable pivoting angle Replaceable pivoting nozzles Nozzle holder is pivotable and replaceable Adjustable water flow rate and measurement Control of the test duration Data for mechanical stress Max. load with test specimen (evenly distributed over the surface) Permissible test specimen weight for test specimen carrier (total) 25 kg Spray radius 200 mm / 400 mm Data for IP protection tests Pivoting speed approx. 60°/s Pivoting angle IPX3 approx. ± 60° Pivoting angle IPX4 approx. ± 180° -10° Dimensions: External dimensions with control cabinet (D x W x H) approx. 1000 x 1350 x 1,900 mm External (D x W x H) approx. 1000 x 1000 x 1,900 mm Internal dimensions (D x W x H) 400 x 650 x 750 mm Operating data Voltage: 3/N/PE AC 400V ±10% 50Hz Rated power 1.5 kW Rated current 6.0 A Weight: 375 kg Condition: used Scope of supply: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: excellent (used), WEISS SWT 600/800 Spray and Splash Water Test System IPX3 IPX4 Manufacturer: Weiss Umwelttechnik GmbH Type: SWT 600/800 Machine Type: Spray and Splash Water Test System Operating Hours: approx. 755.9 h according to the display For sale is a used WEISS SWT 600/800 spray and splash water test system for reproducible testing of enclosures, electrical products, components, and assemblies against penetrating water. The test specimen is positioned on the rotating table in the stainless steel test chamber. A pivoting tube with several spray nozzles moves around the test specimen and subjects it to water from alternating directions. Water flow rate and test duration can be adjusted and monitored via the integrated control system. Technical Data: Test medium: Water Test system: Pivoting tube / Rotating table Ingress Protection (IP) tests: IPX3 / IPX4 according to DIN EN 60529 Pivoting angle: adjustable Pivoting speed: approx. 60°/s according to series documentation Test specimen table: rotatable / height-adjustable Operating modes: Manual / Automatic Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 0.6 kW Rated current: 6.0 A CE marking available Water connections: Water inlet: max. 6 bar Water outlet: without back pressure Adjustable water flow rate Flow meter Regulating valve Manometer Control / Equipment: Touch operating panel Program editor / adjustable test time Operating hours, status and alarm display Stainless steel test chamber Large transparent test chamber door Pivoting tube with spray nozzles Rotating table / Test specimen table Height-adjustable test specimen holder Water inlet and outlet Side-mounted control cabinet Siemens SITOP power supply Lenze drive component Expansion options: With appropriate additional equipment, further IP tests are possible with the SWT series, e.g., IPX1 / IPX2, IPX4K, IPX5 / IPX6 and IPX9K. The additional test equipment or high-pressure units required for this are not included in the scope of supply for this offer. Application areas: Spray and splash water testing IP protection testing Electronics and electrical components Automotive components Sensors and control units Enclosures and luminaires Quality assurance Development and testing laboratories Dimensions / Transport data: Test chamber (L × W × H): approx. 2,350 × 2,400 × 2,650 mm Without hinges / door locking: approx. 2,350 × 2,400 × 1,850 mm Weight of test chamber: approx. 650 kg Transport by forwarding agent Condition: Used Operating hours: approx. 755.9 h Optical condition according to the pictures. Scope of delivery: WEISS SWT 600/800 Spray and Splash Water Test System Pivoting tube spray device Rotating table / Test specimen table Touch control Side-mounted control cabinet Iiedjzzk Tbepfx Amgjh Equipment according to the pictures Availability: by arrangement. Scope of delivery as shown. Subject to changes, errors and prior sale.

Condition: used, Vötsch Temperature testing chamber / Climate testing chamber Vötsch VT 7004 temperature testing chamber Temperature range from -70 °C to +180 °C For sale is a used temperature testing chamber from the manufacturer Vötsch Industrietechnik GmbH. The temperature testing chamber is suitable for temperature tests, environmental simulation, material testing, quality assurance, electronics and component testing, as well as development, aging and stress tests. Iisdpsz R Nrzjfx Amgoh The system features a programmable controller, a stainless steel test chamber, air cooling, and a side access for test specimens. Technical data: Manufacturer: Vötsch Industrietechnik GmbH Type: VT 7004 Device type: Temperature testing chamber / Climate testing chamber Temperature range: -70 °C to +180 °C Humidity control: not available Air-cooled design Test results documented in the workshop protocol: Temperature change rate, heating: approx. 5.44 K/min Temperature change rate, cooling: approx. 4.81 K/min Refrigerant 1: R404A Refrigerant quantity: 0.7 kg Refrigerant 2: R23 Refrigerant quantity: 0.22 kg Standing pressure: 15 bar Permissible operating overpressure: 25 bar Mains connection: 1/N/PE AC 230 V ±10 % / 50 Hz Rated power: 2.0 kW Rated current: 10 A External dimensions according to manufacturer's drawing (W × D × H): approx. 950 × 830 × 757 mm Weight: approx. 150 kg Test specimen access: approx. Ø 80 mm Equipment: Programmable controller Temperature control Air-cooled design Stainless steel test chamber Side access for test specimens RS232 interface RS485/RS422 interface Digital I/O Potential-free contact Program operation and manual operation Application areas: Temperature testing Environmental simulation Material testing Electronics testing Component testing Assembly testing Sensor testing Quality assurance Research and development Aging and stress tests Condition: Used Optical condition as shown in the pictures With signs of wear and tear due to age and use Scope of delivery: 1x Vötsch VT 7004 temperature testing chamber Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional check and replacement of any necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. Documented test run after successful inspection The table shown in the photos and any other items not explicitly mentioned are not included in the sale. Shipping or freight transport is possible. Subject to changes, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: used, Vötsch Temperature testing chamber / Vibration testing chamber Vötsch VTV³ 7120-10 temperature testing chamber Temperature range: -70 °C to +180 °C Designed for combination with vibration / oscillation testing systems For sale is a used temperature testing chamber from the manufacturer Vötsch Industrietechnik / Weiss Technik. Suitable for temperature testing as well as testing in combination with vibration and oscillation testing systems, environmental simulation, material and component testing, as well as development, aging, and stress tests. Technical data: Manufacturer: Vötsch Industrietechnik / Weiss Technik Type: VTV³ 7120-10 Design: Customer-specific unit Simpac Device type: Temperature testing chamber / Vibration testing chamber Temperature range: -70 °C to +180 °C Test chamber volume: approx. 1,150 liters Temperature change rate cooling: approx. 10.5 K/min Temperature change rate heating: approx. 12.0 K/min Test chamber dimensions (W × D × H): approx. 1,100 × 1,100 × 950 mm External dimensions (W × D × H): approx. 1,525 × 3,590 × 2,150 mm Weight: approx. 2,150 kg Refrigerant 1: R452A Quantity: 8.00 kg · GWP: 3,922 · CO₂ equivalent: 31.38 t Max. low pressure: 22.5 bar g · Max. high pressure: 25 bar g Refrigerant 2: R23 Quantity: 5.60 kg · GWP: 14,800 · CO₂ equivalent: 82.88 t Max. low pressure: 22.5 bar g · Max. high pressure: 25 bar g · Static pressure: 17 bar g Power connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 26 kW · Rated current: 49 A Equipment: Programmable touch panel control Temperature control Large stainless steel test chamber Observation window Test specimen ports Preparation for vibration / oscillation testing systems Water-cooled refrigeration unit Multi-stage refrigeration system Connection and supply components as shown in the pictures Application areas: Temperature and vibration testing Environmental simulation Material, electronics, and component testing Assembly and automotive testing Quality assurance Research and development Lifetime, aging, and stress tests Environmental Stress Screening (ESS) Condition: Used Optical condition as shown in the pictures Scope of delivery: 1 × Vötsch VTV³ 7120-10 temperature testing chamber Programmable touch panel Existing connection and supply components Accessories as shown in the pictures Shipping or freight shipping possible. Iedez Ixwljpfx Amgoih Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: used, ESPEC Temperature Shock Chamber / Liquid-to-Liquid Shock Chamber ESPEC TSB-51 Temperature Shock Chamber Temperature range: Hot bath +70 °C to +200 °C / Cold bath -65 °C to 0 °C Approximately 13,611 operating hours Air-cooled For sale is a used liquid-to-liquid temperature shock chamber from the manufacturer ESPEC CORP. The temperature shock chamber is suitable for thermal shock testing, material testing, quality assurance, electronics and component testing, as well as development, aging, and stress tests. The system operates with a liquid-to-liquid testing process with a movable test basket between the hot and cold baths and features a programmable controller. Technical data: Manufacturer: ESPEC CORP. Type: TSB-51 Equipment type: Liquid-to-liquid temperature shock chamber Operating hours: approx. 13,611 h Temperature range, hot bath: +70 °C to +200 °C Temperature range, cold bath: -65 °C to 0 °C Bath volume: approx. 55 liters Test basket: 150 × 150 × 200 mm (W × H × D) Internal dimensions: 290 × 350 × 520 mm (W × H × D) External dimensions: 1200 × 1785 × 1320 mm (W × H × D) Weight according to nameplate: 800 kg Power connection: AC 400 V / 3-phase / 50 Hz Max. power consumption: 22 A Refrigerant 1: R404A Refrigerant quantity: 2.8 kg Refrigerant 2: R508A Refrigerant quantity: 0.89 kg Equipment: Programmable ESPEC controller with display Liquid-to-liquid temperature shock testing system Movable test basket Hot bath and cold bath Overcooling protection Overheating protection Operating hour counter RS-485 interface ESPEC OnlineConverter PN5-CN Ethernet and USB interfaces Operating manuals as shown in the pictures Application areas: Temperature shock testing Thermal cycle testing Material testing Electronics testing Component testing Automotive Quality assurance Research and development Service life testing Aging and stress tests Condition: Used Optical condition as shown in the pictures Device powers on / Controller and display are active Scope of delivery: 1x ESPEC TSB-51 temperature shock chamber ESPEC OnlineConverter PN5-CN Operating manuals as shown in the pictures Accessories as shown in the pictures Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight shipping is possible. Subject to changes, errors and prior sale. Iijdpfxsz Hb Tye Amgoh We would be happy to answer any further questions by telephone.

Condition: used, CTS   CTS CW‑60/5.5 – Water-Cooled Climatic Test Chamber   The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climatic chamber for performing temperature and humidity tests on multiple test specimens simultaneously.   Device Description The climatic test chamber can be used to test the function or material properties of a test specimen under temperature and humidity conditions. The efficient air circulation with a correspondingly high air exchange rate guarantees good heat transfer to the test specimen. The air handling unit is located on the rear of the interior chamber. The components are located in a separate frame behind the device and are easily accessible. The control system is housed in a separate control cabinet. The operating panel is integrated into the control cabinet door. To dehumidify the test chamber, the chamber is equipped with a self-regenerating compressed air dryer. The test chamber can be purged with fresh air using a fan.   Technical Performance Data:   Temperature Tests: Temperature range: -60 °C to +100 °C Temperature deviation: ±0.5 to 1 K over time Temperature change rate: linear, depending on the test specimen and with heat radiation, measured in the supply air Heating: 2 K/min from -40 °C to +85 °C Cooling: 2 K/min from +85 °C to -40 °C   Climatic Tests:   Temperature range: +10 °C to +90 °C Humidity range: 10 % to 95 % relative humidity in the dew point range: +5 °C to +89 °C Temperature deviation: ± 0.5 K over time Humidity deviation: ±1 to ±3 % RH over time Ijdpfszizmnex Amgjih   The technical data refers to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment.   Dimensions: Internal dimensions (test chamber / usable space): Volume: approx. 5,500 liters (5.5 m³)   Internal dimensions (approx.): Height: 2300 mm, Width: 1600 mm, Depth: 1550 mm External dimensions: Height: 2800 mm, Width: 2250 mm, Depth: 5000 mm   Operating Data:   Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz Rated power: 58.3 kW (incl. 5 sockets) Rated current: 86.0 A Protection class: IP 54   Technical Design:   Refrigeration unit: water-cooled, low noise, semi-hermetic, stepless power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R 23 / R 404 A   Notes   Inspection possible by appointment (46325 Borken)   Shipping by freight forwarder possible – costs & organization on request   Scope of supply: (See image)   (Changes and errors in the technical data and specifications are subject to change!)   We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: EmissionEvent VOC/240 Weiss Technik EmissionEvent VOC/240 Industrial emission test chamber / VOC test chamber / climate test chamber Water-cooled For sale is a professional emission test chamber: Weiss Technik EmissionEvent VOC/240 (year of manufacture 2018) from an industrial laboratory and testing facility. The device is used to perform emission tests in accordance with standards under precisely controlled temperature, climate and process conditions and is designed for continuous use in laboratories, industry and quality assurance. What does VOC mean / What does the device do? VOC = Volatile Organic Compounds The device measures and tests the outgassing (emission) of materials under defined conditions. This involves examining which substances a material releases into the air. Typical applications: Emission testing of plastics, components, materials Automotive interior material tests (odor / pollutants) Building products & furniture emissions Packaging, textiles, adhesives, paints Quality control and standard tests (e.g. ISO / VDA / DIN) The test system generates precisely defined temperature, humidity and air conditions. Emissions are passed from the test chamber via a carrier gas (e.g. nitrogen or air) and can then be measured with analysis devices. Device function / features: Stainless steel emission test chamber (hermetically sealed) Temperature and climate control Carrier gas system for emission measurements Automatic process control with touch panel Program operation / continuous operation possible Sampling connections for VOC analysis Industrial design (laboratory & continuous operation) Data for temperature tests: Temperature range +20 to +130 °C Temporal temperature deviation in the center of the usable space ± 0.1 to ± 0.3 K Spatial temperature homogeneity ± 0.1 to ± 0.5 K Temperature change rate (according to IEC 60068-3-5) Heating 0.4 K/min Cooling 0.3 K/min Temperature change rate (on average, with increased heating and cooling capacity) Heating up to +65 °C 1.5 K/min Cooling from +65 °C to +20 °C 1.3 K/min Data for climate tests: Temperature range +20 to +130 °C Dew point range +5 to +60 °C Humidity range 5 to 95 % RH Temporal temperature deviation 0.1 to 0.3 K Temporal humidity deviation -3 to 3 % RH Dimensions EmissionEvent VOC/240 External dimensions (device) Width: approx. 1350 mm, Depth: approx. 2500 mm, Height: approx. 1985 (2190) mm Internal dimensions (test chamber) Emission test chamber: 200 l Test chamber gross: 240 l Test chamber net: 208 l Max. test specimen: 80 kg Internal dimension VOC/240 Width: approx. 600 mm, Depth: approx. 560 mm, Height: approx. 600 mm Electrical: Voltage: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 12.1 kW Rated current: 30 A Protection class: IP54 Refrigerant R134a – 2.5 kg Weight: approx. 1080 kg For your security as a buyer, the following information! The following points will be carried out on our offered chambers in advance: 1. Function check and replacement of necessary components 2. If necessary, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers will be subjected to a documented test run. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions for you by telephone. Iodoziyz Ropfx Amgeih

Condition: used, CTS   CTS CW‑60/5.5 – Water-Cooled Climate Test Chamber   The CW‑60/5.5 from CTS GmbH (Climatic Test Systems) is a medium-sized, walk-in or drive-in climate chamber for conducting temperature and humidity tests on multiple test specimens simultaneously.   Device Description The climate test chamber can be used to test the function or material properties of a test specimen under temperature and humidity conditions. The good air circulation, with a correspondingly high volume of recirculated air, guarantees good transfer to the test specimen. The air handling unit is located at the rear of the interior. The units are located behind the device in a separate frame and are easily accessible. The control system is housed in a separate control cabinet. The control panel is integrated into the control cabinet door. To dehumidify the test chamber, the chamber is equipped with a self-regenerating compressed air dryer. The test chamber can be purged with fresh air via a fan.   Technical Performance Data:   Temperature Tests: Temperature range -60 °C to +100 °C Temperature deviation ±0.5 to 1 K over time Temperature change rate, linear with test specimen and with heat radiation, measured in the supply air Heating: 2 K/min from -40 °C to +85 °C Cooling: 2 K/min from +85 °C to -40 °C   Climate Tests:   Temperature range +10 °C to +90 °C Humidity range 10 % to 95 % relative humidity in the dew point range +5°C to +89 °C Temperature deviation ± 0.5 K over time Humidity deviation ±1 - ±3 % r.h. over time   The technical data refer to an ambient temperature of +25 °C, rated voltage 400 V, without test specimen, without radiation, and without additional equipment.   Dimensions: Internal dimensions (test chamber / usable space): Volume: approx. 5,500 liters (5.5 m³)   Internal dimensions (approx.): Height: 2300 mm Width: 1600 mm Depth: 1550 mm External dimensions: Height: 2800 mm Width: 2250 mm Depth: 5000 mm   Operating Data:   Electrical connection: 400 V +6/-10%, 3/N, PE, 50 Hz Rated power: 58.3 kW (incl. 5 sockets) Iijdpfx Aozizmbomgoh Rated current: 86.0 A Protection class IP 54   Technical Design:   Refrigeration unit water-cooled, low-noise, semi-hermetic, stepless power adjustment through electronic monitoring and control system, environmentally friendly refrigerant R 23 / R 404 A   Notes   Inspection possible by arrangement (46325 Borken)   Shipping by freight forwarder possible – costs & organization on request   Scope of supply: (See picture)   (Changes and errors in the technical data are subject to change!)   We will gladly answer any further questions you may have by phone.

Condition: used, BINDER   BINDER KB 720 Refrigerated Incubator with P Plus Package – Battery Test Chamber EUCAR 5, CO₂ extinguishing system   Device Description:   For sale is a BINDER KB 720 (E6) refrigerated incubator, manufactured in 2022, equipped with the extended safety and performance test package "P Plus".   This device is not a standard laboratory incubator, but a high-quality safety test chamber, specifically designed for aging, performance, and safety testing of lithium-ion energy storage units.   Iodpsziznfefx Amgjih Particular Added Value: The device is designed to safely detect, monitor, and contain critical battery events – up to EUCAR hazard level 5 (fire / flames, no explosion).   What can the device do specifically? (Point 2 – Performance & Application)   Conducting aging tests on lithium-ion cells Performance tests (charge/discharge cycles under temperature) Temperature endurance tests and temperature cycling tests Tests of non-energized and cyclically energized cells Reproducible, precise temperature control throughout the usable space Safe execution of tests under realistic thermal conditions   Test environment for R&D, Automotive, E-Mobility, and energy storage technology   Suitable for: Battery & cell manufacturers Research and development laboratories Testing laboratories & safety testing Automotive / E-Mobility / Energy storage   The P Plus package turns the KB 720 into a genuine battery safety test chamber:   Integrated safety functions: Automatic & manual CO₂ fire extinguishing system Smoke detector with optical & acoustic alarm Mechanical double door lock (secure containment) Spark protection in the interior Exhaust port with reversible overpressure valve Connections for external inerting (e.g., nitrogen) Emergency stop / manual activation of the extinguishing system Feedthrough openings for charging and measuring cables   Result: The device is designed for tests on lithium-ion cells up to EUCAR hazard level 5, where fire or flames may occur, without resulting in an explosion or uncontrolled spread.   Not an abuse or destruction test device, but a safe, standard-compliant test chamber for real operating and fault scenarios.   Technical Core Data:   Temperature range: – 10 °C to +100 °C   Interior volume: approx. 698 liters Shelves: 4 × stainless steel Max. load per shelf: 45 kg Max. total load: 100 kg   Electrical Data: Mains connection: 200–240 V AC Frequency: 50 / 60 Hz Phase: 1-phase Power consumption: approx. 2.1 kW Fuse rating: 16 A   Refrigerant: R134a   Protection class: IP 20   Dimensions & Weight: External (W × H × D): approx. 1250 × 1950 × 900 mm Internal (W × H × D): approx. 970 × 1250 × 576 mm   In short – why this device is special genuine battery safety test chamber suitable for EUCAR hazard level 5 integrated CO₂ extinguishing system large chamber (≈700 l) high market & resale attractiveness   Weight: approx. 285–300 kg   Documents & Downloads   Condition: used   Scope of delivery: (See image)   (Changes and errors in the technical data, specifications are subject to change!)   We will gladly answer any further questions you may have by phone.

Condition: used, Vötsch   Temperature Shock Chamber / 2-Chamber Shock Test System   Vötsch VT³ 7012 S2 Temperature Shock Chamber Warm chamber +50 °C to +220 °C / Cold chamber -80 °C to +70 °C 125 liter test chamber volume – Year of manufacture 2018 – water-cooled version   For sale is a used temperature shock chamber from the manufacturer Vötsch Industrietechnik GmbH.   The system is used for performing rapid and shock-like temperature changes and is particularly suitable for environmental simulation, Environmental Stress Screening (ESS), quality assurance, as well as stress and reliability tests of electronic components, assemblies, and other test specimens.   The VT³ 7012 S2 operates according to the 2-chamber principle with a warm and cold chamber. The test specimen is transported between the two temperature zones in a vertically moving test carriage and is thus subjected to rapid temperature changes.   Technical data:   Manufacturer: Vötsch Industrietechnik GmbH Type: VT³ 7012 S2 Device type: Temperature shock chamber / 2-chamber shock test system Year of manufacture: 2018 Made in Germany   Test chamber volume: 125 liters Number of chambers: 2 Temperature range warm chamber: +50 °C to +220 °C Temperature range cold chamber: -80 °C to +70 °C Max. test weight / test carriage load: 50 kg Refrigeration unit: water-cooled Isdpfx Amozzazuogoih   Refrigerant 1: R449A Refrigerant quantity: 1.70 kg GWP: 1,397 CO₂ equivalent: 2.37 t Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g   Refrigerant 2: R23 Refrigerant quantity: 1.27 kg GWP: 14,800 CO₂ equivalent: 18.80 t Max. low pressure: 22.5 bar g Max. high pressure: 25 bar g Operating pressure: 14 bar g   Mains connection: 3/N/PE AC 400 V ±10 % / 50 Hz Rated power: 10 kW Rated current: 25 A   Test chamber dimensions (W × D × H): 470 × 650 × 410 mm External dimensions (W × D × H): 970 × 2,350 × 1,985 mm Required room height for operation: approx. 2,450 mm Weight: approx. 1000 kg   Equipment:   2-chamber temperature shock system Vertically moving test carriage Programmable touch panel control CONTROLPAD for status display Temperature control Test chamber lighting Observation window Pipe connection Water-cooled refrigeration unit Automated and programmable defrost cycles Operating hour counter Cycle counter / remaining runtime display USB and Ethernet interfaces   Areas of application:   Temperature shock testing Environmental Stress Screening (ESS) Environmental simulation Electronics and component testing Assembly testing Material testing Quality assurance Research and development Reliability testing Lifetime and stress tests   Condition:   Used Optical condition as shown in the pictures   Scope of delivery:   1x Vötsch VT³ 7012 S2 Temperature shock chamber Touch panel control Equipment and accessories as shown in the pictures   Important note: For the safety of our customers, the following work will be carried out on the offered testing and climate systems in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection   Shipping by freight forwarder is possible. Subject to change, errors and prior sale.   We will be happy to answer any further questions by telephone.

Condition: used, Heraeus Type: HT 7012 S2 Heraeus Shock Test Chamber Temperature Shock Test Cabinet, Water-Cooled Two-Chamber Design Warm Chamber: The temperature control for the warm chamber ranges from +50°C to +220°C. Temporal temperature deviation in the center of the usable space: ± 1 K. Spatial temperature deviation: ± 2 K. Temperature change rate: Heating: 11 K/min. Cold Chamber: The temperature control for the cold chamber ranges from -65°C to +70°C. Temporal temperature deviation in the center of the usable space: ± 1 K. Spatial temperature deviation: ± 2 K. Temperature change rate: Heating: 2 K/min. Cooling: 3 K/min. Test chamber volume: 125 liters. Temperature range, warm chamber: +50°C to +220°C. Temperature range, cold chamber: -80°C to +70°C. Test chamber dimensions: Width 470 mm, Depth 650 mm, Height 410 mm. External dimensions: Width 930 mm, Depth 2115 mm, Height 1970+ mm. Rated power: 10 kW. Rated current: 25 A. Voltage: 3/N/PE AC 400 V +6/-10% 50 Hz. Refrigerant: R404A / R23. Weight: 1000 kg. For your safety as a buyer, please note the following information: The following steps will be carried out on our offered chambers in advance: 1. Functional check and replacement of any necessary components. 2. Refilling with refrigerants that comply with legal regulations. 3. Leak test with certificate. 4. After successful inspection, the chambers will undergo a test run, which is monitored with calibrated devices. Condition: used. Iisdpfxozd R Aze Amgeh Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Heraeus Vötsch Type: VTS 7034-5 Heraeus Vötsch Temperature Testing Chamber, Water-Cooled Temperature range: -70°C to +180°C Temperature deviation (temporal): ± 0.1 to ± 0.5 K Temperature deviation (spatial): ± 0.5 to ± 2.0 K Temperature change rate (cooling): 5.0 K/min Temperature change rate (heating): 6.5 K/min Heat compensation at +20°C: 3000 W Heat compensation at -20°C: 3000 W Test chamber dimensions: Width 580 mm, Depth 765 mm, Height 750 mm External dimensions: Width 870 mm, Depth 1595 mm, Height 1775 mm Test chamber volume: 335 liters Rated voltage: 3/N/PE AC, 400V ±10 %, 50Hz Rated power: 10 kW, Rated current: 21 A Iiedpozd R Tgjfx Amgoh Sound level at 1m distance (free-field measurement): < 69dB (A) Side access port: 5.5 cm / 12.5 cm The chamber is water-cooled. Refrigerant: R 452A and R 23 Weight: approx. 570 kg For your safety as a buyer, please note the following information: The following steps are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with refrigerants that comply with legal requirements 3. After successful inspection, the chambers undergo a test run, which is monitored with calibrated devices. Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) We would be happy to answer any further questions you may have by phone.

Condition: used, Espec Climate testing chamber / temperature testing chamber Espec PL-4J climate testing chamber Temperature and climate testing chamber, water-cooled For sale is a used climate testing chamber from the manufacturer ESPEC Corp. The testing chamber is suitable for temperature and climate tests, environmental simulation, material testing, quality assurance, as well as development and stress tests. Technical data Manufacturer: ESPEC Corp. Type: PL-4J Device type: Climate testing chamber / temperature testing chamber Year of manufacture: 2020 Test chamber volume: approx. 800 liters Weight: approx. 610 kg Temperature range: -40 °C to +100 °C Temperature change rate (heating): approx. 3 K/min Temperature change rate (cooling): approx. 2 K/min Humidity range: 10 to 98 % RH Refrigerant: R452A Refrigerant quantity: 1.16 kg + 0.36 kg Power connection: AC 400 V / 3~ / 50 Hz Max. power consumption: 21 A Internal dimensions (W × H × D): approx. 1000 × 1000 × 800 mm External dimensions (W × H × D): approx. 1410 × 1970 × 1273 mm Equipment Touchscreen control Program control Temperature and humidity control Stainless steel interior Viewing window with interior lighting 100 mm cable entry Water-cooled condenser Castors for easy transport Application areas Temperature testing Climate testing Environmental simulation Material testing Electronics testing Quality assurance Research and development Condition Used Optical condition as shown in the pictures Scope of supply 1x ESPEC PL-4J climate testing chamber Accessories as shown in the pictures Important note: Iiedpfxjzntxms Amgoh For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Shipping or freight forwarding possible. Subject to changes, errors and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Weiss Type: TS 130 Temperature shock test chamber, water-cooled Specification: Temperature range, hot chamber: +60°C … +220°C Temperature range, cold chamber: -10°C … -80°C Hot/cold chamber changeover: 10 sec. Temperature stability: ±1 K Dimensions and other data: External dimensions: Height 1990 mm Width (without and with door hinge): without… approx. 1820 mm, with… approx. 1850 mm Depth (without and with test chamber door): without… approx. 900 mm, with… approx. 1155 mm Iisdpfx Amjzp D Dijgoh Dimensions of the lift platform (test chamber): Height 450 mm, Width 500 mm, Depth 600 mm Volume: 130 liters Test chamber load: max. 20 kg Load on the test chamber floor: max. 20 kg Cooling water pressure: min. 2 ... max. 6 bar Max. fuse rating: 35 A (plug 32 A CEE) Sound pressure level, 1 m in front of the device: approx. 65 dB(A) Refrigeration cascade, water-cooled Connection values: 3/N/PE/AC 400V ±10% 50Hz /14.0 kW Rated current: 26.0 A Refrigerant: R 404A / R23 Weight: approx. 950 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.