Used Scheer Bm 340 for sale (3,530)

Condition: used, Material clamping via handwheel. Cutting length 3000 mm. Max. cutting height 60 mm. Kodpovvkbljfx Ab Ielu Storage location: Nattheim

Condition: like new (used), functionality: fully functional, Stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent, like-new optical and technical condition, the device has been used very little. Fully functional—ready to use immediately. All machines are intended for commercial use, no DIY store scrap. Treppenwangenfräsgerät SCHEER TW 4 With this device, you can mill treads and risers very precisely and accurately. The hand crank even allows you to machine curved joint surfaces; you can also use it for recesses in other panel materials, such as worktops. Equipped with hardened guide rods, on which the cross support with router is mounted. Kledsyxr T Tepfx Ab Iju Featuring ball bearing guide bushings, allowing the device to move very easily, accurately, and safely. The device can be clamped securely onto the stringer or similar workpieces using four screw clamps. The cross support has two stops each in both the longitudinal and transverse directions. Comes with two positioning angles. Complete with manual, tooling, and all accessories. Longitudinal milling travel: 750 mm; transverse milling travel has been increased from 75 mm to 320 mm, significantly expanding the machine's application range. To increase the milling travel, a new base frame made of aluminum profiles was manufactured. The modification work was carried out by a reputable engineering company. Everything works perfectly; this machine is a true one-off. Router SCHEER HM 16 Very good condition, with only minor signs of use. Very robust, thanks to triple-bearing router spindle. Accurate concentricity and flawless milling results. Precise column guidance and torsion-resistant milling table. Constant speed, even under heavy load. Equipped with high-performance motor (shows almost no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. The machine is suitable for the toughest continuous milling operations. Good visibility of the milling spindle; chips are blown away by a powerful fan. 220V, 1800W. Speed: 18,000 rpm. Fully functional. With M16 female thread mount.

Condition: like new (used), functionality: fully functional, Dowel Hole Drilling and Inserting Machine SCHEER BS 5102-V Kjdpfx Abjunvg To Islu The BS 5102-V is a powerful, electronically controlled machine designed for precise and efficient face-end drilling and accurate insertion of wooden dowels. It is ideally suited for industrial wood processing—especially in furniture and carcass production. Condition & Service: Condition: As new (completely overhauled & newly painted) Functionality: Fully operational Warranty: 12 months CE compliant / Dust-tested Main Technical Data & Features: Workpiece width: min. 60 mm / max. 1200 mm (Pendulum operation: max. 600 mm) Workpiece thickness: 15 – 60 mm Drilling depth: max. 45 mm Vertical stroke of the support: 7.5 – 50 mm Min. lateral drilling distance: 10 mm Drilling unit: 9,000 – 18,000 rpm (adjustable), 1.5 kW Drilling system: M10 external (Scheer system) Servo motor: 0.54 kW, max. 60 m/min feed rate Dowel size: 8 x 30 / 8 x 50 mm, DIN 68150 Form A Glue system: 1:1 diaphragm pump, max. 7 bar Glue container: spiral conveyor, 3.5 liter capacity Extraction connection: Ø 80 mm | Extraction airflow: 540 m³/h at 30 m/s Clamping cylinders: 4 short-stroke cylinders (Ø 63 mm), angular clamping Power supply: 400 V, 50 Hz Machine Construction & Operator Comfort: Controlled X-axis with machine frame as workpiece support X-support with linear guide and rack-and-pinion drive Servo drive for feed system Clamping portal with 4 adjustable clamping cylinders—controllable in 2 groups Stop rulers: left, right, and center on the table Drilling depth and dowel projection are adjustable directly on the support Offcut Unit & Safety Systems: Safety hood locking Lamella safety curtain Integrated extraction channels Control & Operation: PC with Siemens PLC controller User interface: WP-Studio—dialog-oriented programming Operating system: Windows 10 Display: 17" color monitor Separate workpiece programs for left & right operating sides (mirrored possible) Glue quantity can be individually defined per program Network capable (LAN/WLAN), compatible with Windows, Linux, Mac, Novell Remote maintenance & software updates possible Optional Equipment: Y-axis: automatic adjustment of drilling and glue units Electronic glue monitoring: ensures controlled glue flow Additional drilling unit for surface-side drilling: • Drilling motor: 1.5 kW at 18,000 rpm • Drill feed: pneumatic • Drill stroke: max. 25 mm • Depth limit: via spindle & SIKO display • Drill distance from reference edge: 5 – 35 mm • Holder: M10 external, max. Ø 35 mm • Workpiece length: min. 70 / 90 mm Warranty & Reliability: We are convinced of the stability and manufacturing quality of our machines—that’s why you receive a 7-year warranty on the machine construction, especially on the supporting structure and guide mechanism. Excluded are electrical supply components as well as normal wear parts. Additionally, we provide a 1-year warranty on the complete machine (including control, hydraulics, pneumatics, etc.). Conclusion: This machine combines state-of-the-art control technology, high manufacturing quality, and user-friendly operation. Ideal for precise dowel hole drilling and automated dowel insertion—reliable and efficient for continuous operation. 📞 Contact us for an individual offer or to schedule a demonstration. Available from stock. Delivery, commissioning, and training available as options.

Condition: like new (used), This used SCHEER DB 4 universal dowel boring machine has been functionally tested, worn parts have been replaced and the machine geometry has been readjusted to ensure maximum precision. The SCHEER DB 4 universal dowel hole drilling machine is specially designed for drilling construction holes, for drilling holes in rows in a 32 mm grid system and for drilling a wide variety of fittings; it enables all these tasks to be carried out quickly, precisely and without long set-up times. Extremely simple operation via symbols and 4 program preselection controls for changing over to the new work process in seconds. Central adjustment of the removable side stops, therefore always flush at the front edge, precise drilling of left and right workpieces. It does not matter whether the parts are cut to size or at the correct angle. The doweled corner joint is always flush, both on the edge and on the surface! No CNC machine can achieve this as easily and quickly as a SCHEER DB 4. Safety clamping device across the entire table width, clamping of the workpieces directly on the drilling beam. Stop rail with three adjustable folding stops. Continuous table supports make it easier to push through and drill long workpieces, fold-up workpiece support tables facilitate line drilling and hardware drilling. 2 drilling units Drill motor type BM 602-230/400 Volt, 50 Hz, n= 2860, 2.2 kW output 25-spindle attachment gearbox Spindle pitch 32 mm (other spindle pitches on request) For surface and face drilling. The vertical drilling unit is equipped with an oil brake for tear-free drilling through rows of holes. The control cabinet of the machine has been completely rebuilt and converted to the new SIEMENS LOGO CONTROL. This ensures the operational safety of the machine for the future! Gantry passage: max. 950 mm Working length: max. 2360 mm Kledpfxju Rqi Aj Ab Ieu

Condition: used, Year of construction: 1991, width of the strips 150 mm band length 2.000 mm motor 400 V Klodpfx Aboy Ty A Es Isu loading area 450 x 160 mm total power requirement 4,0 kW dimensions of the machine ca. 1,10 x 0,70 x 1,15 m - Serial-No.: 200.184

Condition: excellent (used), 25 vertical drills 25 horizontal drills Kledsy S Awcjpfx Ab Isu 2.2 kW upper motor 2.2 kW lower motor 100 cm ground clearance

Condition: excellent (used), Year of construction: 1988, Scheer dowel drilling machine DB 12 used 3 spindles Kjdpjy Ahuhsfx Ab Iolu 32 mm drilling center distance Motor 1.1 kW Max. drilling depth 70 mm Location: ex stock 54634 Bitburg - immediately available -

Condition: used, boring spindle 21 dividing 32 mm hollow max. 1.000 mm Klsdpfx Aowp E Uxjb Isu swivable pneumatisch °

Condition: excellent (used), Year of construction: 1986, Scheer circular cutting system Stable base frame Portal design allows workpiece to pass through Fully automatic control with skip function Height-adjustable drilling unit Cutting diameter: Min: 70 mm Max: 305 mm Depth: Max. 40 mm Up to 2 panels per cut Central bore: 7–10 mm Possible center bore: 15–35 mm Drill motor BM 602 Machine cycle times: Beech: diameter 220 mm, depth 40 mm – 40 sec Plywood: diameter 220 mm, depth 40 mm – 20 sec Chipboard: diameter 350 mm, with bore D: 35 mm – 30 sec Location: ex stock 54634 Bitburg Klodpeyy St Ajfx Ab Isu - immediately available -

Condition: ready for operation (used), functionality: fully functional, FM 10-3100 A, horizontal veneer and panel saw, ideal for precise longitudinal cuts on veneer packs, chipboard, MDF, and thin solid wood, automatic feed and return of the saw carriage, infinitely variable control of feed rate, saw blade height, and cutting lengths, pneumatic special pressure beam, front and rear support tables HP 520, longitudinal and cross cuts in a single operation, Kodpsyzxkwsfx Ab Ijlu three-phase brake motor 6.8 HP / 5 kW and scorer unit, efficient dust extraction, maximum cutting height 60 mm, cutting length 3100 mm, good condition, machine ready for immediate use for further technical details, see pdf file (brochure) located in Neustadt/Weinstr. Transport available at additional cost! Due to the age of the used machine, warranty is excluded for commercial buyers.

Condition: used, Cutting length 6.100 mm length ~ 7.260 mm Kledpfx Absy Nn Dcj Iju width ~ 1.230 mm mm height ~ 1.550 mm mm Veneer saw or jointing and fine-cutting machine Scheer FM6-6100A for sawing veneer or other thin panels with automatic feed and integrated suction.

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, total length: 2,150 mm, year of last overhaul: 2025, total width: 550 mm, total height: 700 mm, DGUV certified until: 05/2027, conveyor belt width: 350 mm, input frequency: 50 Hz, Equipment: chassis, bm TEC Dough Conveyor Belt, Long Version Belt width: 350 mm Belt speed continuously adjustable Stainless steel design DGUV V3 tested exclusively by us Dimensions approx.: 2150 x 550 x 700 mm (W x D x H) Connection: 230 V Klodpfey Ik Arex Ab Iju Used machine, cleaned & SAB inspected Visit our large exhibition!

Condition: like new (used), functionality: fully functional, input voltage: 230 V, total length: 1,200 mm, year of last overhaul: 2025, total width: 500 mm, total height: 1,050 mm, DGUV certified until: 06/2027, conveyor belt width: 300 mm, input frequency: 50 Hz, Equipment: chassis, bm TEC dough conveyor belt, foldable Belt width: 300 mm Belt speed: infinitely adjustable Stainless steel design Exclusive to us: DGUV V3 tested Approx. dimensions: 1200 x 500 x 1050 mm (W x D x H) Klodpjy Ik Aljfx Ab Iou Connection: 230 V Used machine, cleaned & SAB tested We have many more bakery machines in stock!

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, total length: 700 mm, year of last overhaul: 2025, total width: 550 mm, total height: 800 mm, DGUV certified until: 05/2027, conveyor belt width: 350 mm, input frequency: 50 Hz, Equipment: chassis, bm TEC Dough Conveyor Belt, short version Belt width: 350 mm Belt speed infinitely adjustable Stainless steel construction DGUV V3 tested exclusively by us Dimensions approx.: 700 x 550 x 800 mm (W x D x H) Connection: 230 V Used machine, cleaned & SAB tested We have more bakery machines in stock! Kedpfx Ajy Ik Afeb Ielu

Condition: excellent (used), functionality: fully functional, Kitchen Worktop Router FG 314-2 - with overhead router HM / 18 Scheer - Milling length: 900 mm - Milling depth: 0–90 mm - Complete with template - Weight approx. 21 kg - 2000 watts - 7 kg - Speed: 10,000 – 18,000 rpm Transport available at additional cost! Kjdpfx Abex R Efgs Ijlu Due to the age of the used machine, warranty is excluded when selling to commercial customers.

Condition: used, Year of construction: 1985, functionality: fully functional, Scheer DB5 line boring machine - Year of manufacture: 1985 - 380 Volt - 21 spindles; 32 mm pitch Klodpswv Uy Defx Ab Iju - stop ruler - various dowel drills - portal clearance: 1056 mm - 2.2 kW Transport available at extra cost!

Condition: used, Cutting length: 3050 mm Workpiece clamping: handwheel Kodpfx Absm H Uxyj Islu Extraction system: yes

Condition: good (used), Year of construction: 1980, Dowel drilling machine for frame production Kedjyy I Snepfx Ab Islu

Condition: good (used), Manufacturer: John Scheer Meuselwitz Machine number: 6815.17 Type / Model: SFW 250 Table: mm Sanding area: 1,000 x 250 mm Magnet: 1,000 x 250 mm Grinding wheels: mm Table speed: m/min Table spindle center max.: mm max. sanding height: mm Kjdpfjrrdtxsx Ab Ielu Connection: 10.5 kW Accessories/equipment: Electromagnet Condition: good Weight: 5 tons Dimensions: mm

Condition: new, functionality: fully functional, Cutting rotor for a strand pelletizer Kledpopgulwofx Ab Iou Manufacturer: MAAG / Scheer - Cutting rotor width: 200 mm - Excellent condition

Condition: good (used), Rigo Lamibind 340 HM Perfect Binder Machine in perfect condition, manufactured in 2016, with very low mileage. Ready to use. Hot Melt Binder Machine is very quick to set up – controlled via a touchscreen panel. Disc milling. External waste extraction. Instructions included. Kedpoy E Ewrofx Ab Ijlu Technical specifications: Capacity up to 290 cycles/h Binding thickness 40 mm Max. format 340 x 450 mm Min. format 80 x 80 mm Cover thickness 300 gsm Weight 300 kg Power supply 230V

Condition: refurbished (used), hydraulic feed drive unit, fully reconditioned, stepless variable; Kledpfoirmulex Ab Iou 1 unit for KME 2 or BM - right execution - without additional pump - type 56-009

Condition: used, Scheer FM 2-3000 Veneer Saw, Splicing and Fine Cutting Saw Kodpoxf Tqwsfx Ab Ijlu Type: FM 2-3000 Motor: 2.5 HP Machine No.: 199540 Cutting length: 3000 mm Saw blade diameter: 180 mm Rear support table Weight approx. 300 kg.

Year of construction: 2008, condition: good (used), functionality: fully functional, Used strand granulator Klsdohfmrtopfx Ab Iou Year of manufacture: 2008 Scheer SGS 100-E4 Condition: good, functional tested Available immediately

Condition: good (used), Year of construction: 1984, functionality: fully functional, Veneer Saw Scheer FM8-3100 Year of manufacture: 1984 Pneumatic tensioning Cutting length: 3100 mm Kjdpfx Aoyvg D Usb Ijlu Max. cutting height: 45 mm Dimensions: 3.8 x 0.7 x 1.15 m Weight: approx. 400 kg