Used Schmidt Toggle Press for sale (13,335)

Condition: good (used), functionality: fully functional, Very robust and heavy-duty mechanical knee-lever press made of cast iron. Converted to electric heating, 230V/50Hz. Ndjdszuwv Nspfx Aqxsc Approx. 850 kg. Pressing area: 40x45 cm.

Condition: good (used), Year of construction: 2000, 5 pieces in stock. Price applies to 1 piece. Knee-lever press, manufacturer: SCHMIDT, pressure: 3 kN. Ndsdpfoiduvgjx Aqxec

Condition: used, mileage: 20,050 km, power: 55 kW (74.78 HP), first registration: 11/2021, fuel type: diesel, driver cabin: other, gearing type: other, Year of construction: 2021, operating hours: 2,532 h, number of seats: 2, Equipment: air conditioning, * Compact sweeper Swingo 200+ Basic - push-type 2-brush system * Hydro-pneumatic suspension * 4-wheel steering (4WS) switchable * 2 brushes D=850mm * Rotating beacon (non-folding) * Pressurized water system with dirty water pump * 2 work lights on the cabin roof and 1 LED work light for the suction nozzle * Air conditioning * Cruise control * Warning triangle, first aid kit, safety vest - according to EN 471 * Swingo transport speed 50 km/h - including additional disc brake system on the rear axle * Folding rotating beacon * Wheel chock with holder * Engine: VM R 754 ISE 5 - EuroMot 5 - 4-cylinder - 55 kW (75 hp) EuroMot5 homologation incl.: DOC + DPF (Diesel Oxidation Catalyst + Diesel Particulate Filter closed system) * 500-hour service interval (instead of standard 300 hours) with special ASH Long Life oil Nsdszcfytspfx Aqxedc * Hydropneumatic comfort suspension on front and rear axles - front and rear axle suspension via hydraulic cylinders and nitrogen accumulators - high driving comfort and best driving safety. Note: System is not maintenance-free * Air-suspended driver's seat including headrest * 3-point safety belt for driver - mounted on the cabin rear wall - Option 174590 Headrest for driver's seat is required * 2-point belt (lap belt) for passenger * DAB+ radio, CD, MP3, USB connection and Bluetooth hands-free system * Rear area monitoring with monitor and camera * Camera for suction nozzle monitoring * Reversing warning signal can be switched off (night mode) * Steering wheel knob * 12V socket (cigarette lighter socket) in the cabin (max. 15 A) * Professional plate brush control for 2-brush system (independent control) * C-shaped brush arms for 2-brush system * Mixed brush bristles (steel / poly-plastic) * Coarse dirt flap rubber in the suction nozzle made of 17mm material instead of 10mm * Preparation for subsequent installation of the hand suction hose * Standard paint finish RAL 9016 white * LED rotating beacon (instead of the standard rotating beacon) * Manual central lubrication, all lubrication points combined on two blocks Other: * Trade-in and purchase of vehicles and machines possible. * Sale price excluding transport and delivery. * No liability for printing and typographical errors. * Errors, changes and prior sale reserved. * Offer is subject to change. * Photos may vary. Price applies to the existing condition. * All information without guarantee.

Condition: new, Knee-lever hand press HK 500, pressing force 5.0 kN, stroke 40 mm, working height 60-150 mm. · Power transmission via knee-lever mechanism · Spindle hardened and ground · Long spindle guide for optimal pressing performance · Working height adjustable by simply loosening the clamping screws on the stand Nedpfj Ab Dt Eox Aqxedc · Hand lever return via spring · With table hole 15 mm Ø in the T-slot · Important! With the knee-lever mechanism, the maximum pressing force is only achieved when the knee lever is fully extended, i.e., shortly before the end of the stroke. · Further technical specifications: Width: 175 mm · Length: 115 mm · Table length: 115 mm · Spindle bore: 10 H 7 mm · Weight: 11 kg · Base width: 175 mm · Overhang: 73 mm · Base length: 115 mm · Spindle guide: 50 mm · Stand height: 290 mm · Table width: 70 mm · Slot width: (DIN 650) 10 mm Base width: 175 mm Model: HK 500 Working height: 60-150 mm Width: 175 mm Weight: 10 kg Slot width: (DIN 650) 10 mm Table length: 115 mm Stroke: 40 mm Stand height: 290 mm Table width: 70 mm Pressing force: 5.0 kN Base length: 115 mm Spindle bore: 10 H 7 mm Overhang: 73 mm Spindle diameter: 20 mm Spindle guide: 50 mm Length: 115 mm

Condition: good (used), Year of construction: 2006, functionality: unexamined, Internal article number: 26057 Nedpfozx Scxsx Aqxsdc Pneumatic press Manufacturer: Schmidt Machine no.: 27-400084 Year of manufacture: 2006 Pressing force: 20 kN Stroke: 100 mm Safety distance: 348 mm Table: 200 x 150 mm Acceptance diameter: 20 mm Max. distance from table to acceptance point: approx. 270 mm Dimensions (L x W x H): 70 x 40 x 100 cm Weight: 60 kg Includes two-hand operation and emergency stop. Attention! The control unit for the machine is missing. The press would have to be operated purely pneumatically. You are welcome to inspect the machine while it is powered on, in our heated warehouse with over 500 m² of space.

Condition: used, Year of construction: 2016, Pneumatic press Manufacturer: Schmidt Type: 25-100-3K Year of manufacture: 2016 Nominal force: 12.5 kN Stroke: 100 mm Includes SCHMIDT PressControl 75 in the two-hand safety version Ndsdjz Hlzhspfx Aqxsc Weight approx.: 45 kg 51026ä

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, power: 44 kW (59.82 HP), input voltage: 400 V, input current: 68 A, table width: 2,250 mm, table length: 4,000 mm, OTT press – 4000x2250 mm working surface Programmable control, heated platens, 8-cylinder hydraulic pressing system. Nsdpfx Aoz Rn Sfoqxedc Heated vertical working surface (can also be used horizontally). For sale in excellent technical condition!

Condition: new, pressure 17,0 kN stroke 60 mm throat 105 mm Working height from to 75 -180 mm table surface area 170 x 130 mm spindle diameter 25 mm weight of the machine ca. 35 Kg dimensions 260 x 130 x415 mm Knee lever hand presses SPECIAL PRICE!!! HK 1700 stroke 60 mm with crank with fine adjustment of working height Ndodpfx Aqsfv Avnjxjc Stand height 450 mm Even more pressure in production without additional effort. Maximum pressure performance shortly before the end of the stroke thanks to toggle lever technology. Particularly stable construction of the spindle head and column

Condition: good (used), Tranklein BP bookbinding press for pad/block pressing The machine is in very good condition, fully functional, and ready for production. Power supply: 380V. Fast operation. Hydraulic power unit. Format: 340 x 260 mm. Stack height: 820 mm. Adjustable pressing force, max. 2500 kg. Njdpfx Aqsz S Utlexjdc Weight: 250 kg. Mounted on casters for easy movement.

Condition: used, Year of construction: 2014, We are selling a used Schmidt Keil Vario snow plough KLV 24, year of manufacture 2014. Scraper bars made of steel, 20 mm, with shock absorber strip and stabilizing spring. Adapter group for Multicar, Ausa, Leiber. Glide plates, splash guard, side deflector, plough lighting, marker lights. If you have any further questions regarding the equipment, please feel free to contact us. Storage location: 99428 Weimar. Nedpfxjyq Awlo Aqxedc

Condition: new, pressure 26,0 kN stroke 60 mm throat 110 mm Working height from to 70 - 250 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 46 Kg dimensions 310 x 140 x 475 mm Knee lever hand presses SPECIAL PRICE!!! HK 2600 stroke 60 mm, incl. working height fine adjustment via bevel gear with comfortable and easy to adjust with a side crank. Stand height 475 mm Even more pressure in production without additional effort. Ndjdpfsfv Avrsx Aqxsc Maximum pressure performance shortly before the end of the stroke thanks to toggle lever technology. Particularly stable construction of the spindle head and column

Condition: new, pressure 34,0 kN stroke 40 mm throat 130 mm Working height from to 80 - 240 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 80 Kg dimensions 375 x 200 mm Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Toggle lever pneumatic presses are to be used when the maximum Ndsdpfx Aqjfv Avysxoc pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc.

Condition: new, pressure 17,0 kN stroke 40 mm throat 110 mm Working height from to 70 - 220 mm table surface area 190 x 140 mm spindle diameter 30 mm weight of the machine ca. 60 Kg dimensions 310 x 190 mm Toggle pneumatic presses incl. working height fine adjustment via bevel gear with lateral crank comfortable and easily adjustable. Toggle lever pneumatic presses are to be used when the maximum pressure is required shortly before the end of the stroke, e.g. when assembling, punching, embossing, caulking, etc. Nedpfefv Avvsx Aqxodc

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Description WEOFFER AN BEAUTIFULL CONDITION REIS PRESS YEAR: 2004 WITH SIEMENS OPERATIONAL PANEL. Description Press force: 1000 KN Press closing speed: 50 mm/s Press opening speed: 50 mm/s Installation height: 1400 mm Maximum table distance: 1700 mm Tables: 1600×1300 mm Allowable weight 12000 kg No.1 clamping table Translation 1500 mm speed 200 mm/s Maximum load 6000 kg Nr.1 Tilting table Angle 60° Maximum load 7500 Kg Overall dimensions: 3900 x 2400 x 3045 mm Ndjdpfexu Ddtjx Aqxoc FOR TRANSPORT WILL BE DISASEMBLED -CILINDER AND HYDRAULIC UNIT TO FIT ON MEGA TRAILER 3000mm height is required. Weight: 17000 Kg

Condition: used, pressure 100 t Ndodpslp U Sdsfx Aqxsc distance between columns 310 mm no. of strokes 80 Hub/min ram - range of adjustment 40 mm table surface area 400x300 mm ram surface 250x190 mm table height 960 mm tool hole in ram Ø 35 mm weight of the machine ca. 1,5 t dimensions of the machine ca. BxTxH 1500x1500x2200 m

Condition: used, Year of construction: 2021, Suitable for (model): Unimog, truck, UNIMOG. We are selling one used Schmidt Stratos S 30 - 24 VEP 490 spreader, manufactured in 2021. STRATOS S30 Schmidt silo spreader STRATOS S 30 (24), 3.0 m³ stainless steel container Auger conveyor ("S") Protective grid 40x40 mm, steel (for S/F/D25-30) Folding roof Profi, stainless steel (for 25-30) Container in orange RAL2011 (standard) Auger cover (for S17 - S30) Stainless steel ladder (standard for stainless steel spreader) Rear cover, stainless steel FS preparation (additional valve on the hydraulic block) Drive via vehicle hydraulics ("V") Connections at the front of the unit (for V) Hydraulic couplings, leak-proof ISO16028, P=Size 2(M) R=Size 3 Control system Evolution Professional "EP", incl. electric adjustment of the spreading pattern Premium spreading disc "490" (spreading width 2 - 10 m) Ball joint frame for Unimog 405.125 Support feet (4 pcs.), 3 t., crank drive in the center, incl. lateral supports Rotating beacon (1 piece) Warning tape red-white, at the top of the container Marking "Winter service" (German) Contour marking according to UN ECE R48 Splash guard 2,000 mm Minimum flow connection on the valve block, without pressure gauge Ndodpfjyq Ar Asx Aqxoc Flow rate detection with load sensing pump (for V) Location: 93095 Hagelstadt

Condition: new, Year of construction: 2025, functionality: fully functional, Kyori High-Speed Press ANEX 40-1100 with Fixed Stroke Technical Specifications Capacity: 400 kN Die Area (L-R x F-B): 1100 x 600 mm Fixed Stroke Length: 13 mm (other stroke lengths available upon request) Speed with Maximum 180 kg Upper Die Weight (other upper die weights available upon request): 13 mm Stroke Length: 1050 SPM (strokes per minute) Power Supply: 76 kVA Servo Motor Power: 47 kW Die Shut Height: 250 – 300 mm (customizable) Slide Adjustment: 50 mm Strip Inlet Width: max. 200 mm Strip Inlet Height: 90 – 150 mm Additional Information · Highly dynamic, link-motion fixed stroke design · Modern, high-performance PCS100 press control with modular design · Highly efficient drive system for reduced CO2 footprint · Bottom dead center position and crank angle remain unchanged · Industry 4.0 ready via OPC-UA interface · Press force monitoring · Integrated tool monitoring · Integrated PV100 servo feeder system Njdpfx Asydvgtjqxjdc

Condition: ready for operation (used), Year of construction: 2016, stroke length: 350 mm, total width: 3,350 mm, total height: 5,500 mm, overall weight: 100,000 kg, product length (max.): 4,100 mm, Mechanical stamping press manufactured in 2016. This HIM HWAIL PRESS HCDS-600 features a press capacity of 600 tons and a stroke length of 350 mm. It includes a slide area of 2900 x 1300 mm and a bolster area of 3000 x 1400 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-600 machine we have for sale. Contact us for further details. • Press capacity: 600 ton • Rated tonnage point above B.D.C.: 7 mm • Number of strokes: 30 SPM • Stroke length: 350 mm • Die height: 600 mm • Slide adjustment: 120 mm • Slide area (L x W): 2900 x 1300 mm • Bolster area (L x W): 3000 x 1400 mm • Bolster thickness: 240 mm • Working height: 1300 mm • Side opening: 1450 x 750 mm • Main motor: AC 55 kW x 4 / VS 75 kW x 4 • Slide adjustment motor: 5.5 kW x 6 • Air pressure: 5 kg/cm² • Die cushion capacity: 16 x 2 ton • Die cushion stroke: 130 mm • Pad area (L x W): 1400 x 650 mm • Quantity available: 5 units Nsdsz Sqf Rjpfx Aqxedc • Pricing note: indicated price is per individual machine Additional equipment • Shuttle transfer robot/system • Included when purchasing the complete package of machines • Available separately at EUR 120,000 Technical Specification Stamping Force 6000 Kn

Condition: ready for operation (used), Schmidt 24-041-89 Pneumatic Press Pressing force: 9 kN Overtravel: 15 mm Nedexxaz Aopfx Aqxjdc Two-hand operation Max. operating pressure: 9 bar Stroke: 50 mm You are welcome to arrange a viewing appointment. We are happy to organize cost-effective shipping for you! You will receive a proper invoice. For international customers, net invoicing is possible, provided you have a valid VAT ID number. Subject to prior sale. Visit our shop and check out our other offers. Stated company names and trademarks are property of their respective owners and are used for identification and description purposes only. Deviations from technical data and errors in the item description are possible and remain reserved.

Condition: ready for operation (used), Year of construction: 2016, stroke length: 280 mm, total width: 3,050 mm, total height: 5,000 mm, product length (max.): 4,000 mm, Mechanical stamping press manufactured in 2016. This HIM HWAIL PRESS HCDS-500 features a press capacity of 500 tons and a stroke length of 280 mm. It includes a slide area of 2800 x 1200 mm and a bolster area of 3000 x 1300 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-500 machine we have for sale. Contact us for further details. • Press capacity: 500 ton • Rated tonnage point above BDC: 7 mm • Strokes per minute: 30 SPM • Stroke length: 280 mm • Die height: 550 mm • Slide adjustment: 120 mm • Slide area (L x W): 2800 x 1200 mm Ndjdpfjz Sqiiex Aqxsc • Bolster area (L x W): 3000 x 1300 mm • Bolster thickness: 235 mm • Working height: 1300 mm • Side opening (W x H): 1200 x 700 mm • Main motor: AC 45 kW x 4 / VS 55 kW x 4 • Slide adjustment motor: 3.7 kW x 6 • Air pressure required: 5 kg/cm² • Die cushion capacity: 16 x 2 ton • Die cushion stroke: 130 mm • Pad area (L x W): 1400 x 650 mm Technical Specification Stamping Force 5000 Kn

Condition: used, Year of construction: 1988, Width: 1600 mm, Height: 830 mm, Sweeping width: 1360 mm, Weight: 280 kg, Rubber blades approximately 30% worn, Suitable for Mercedes/Multicar UX 100. Nede Afg Hpjpfx Aqxedc

Condition: used, Year of construction: 1996, Suitable for (model): Unimog, truck_____We are selling 1 used Schmidt snow plow CP 3 with sliding shoes, lighting, and hydraulic swiveling left/right. Further information available upon request. Location: 93095 Hagelstadt. Ndjdpfxeyq Aq Se Aqxec

Condition: excellent (used), Year of construction: 2012, Pressing force 28 kN Min./max. operating pressure 3 / 6 bar Stroke 12 mm Electrical connection 220 Volt Overhang 130 mm Ndsdpfoz Hv U Sox Aqxec Table 200 x 150 mm

Condition: new, Year of construction: 2024, functionality: fully functional, Kyori High Speed Press VX50-1500 with variable stroke adjustment Tonnage: 500 kN Drive design: flywheel with dynamic balancing Strip running direction: possible on both sides Main drive position: right Ram adjustment range: 55 mm Shut height standard: 300 mm Max. upper die weight: 300 kg Safety doors: front and back Work area lighting: 2 LED lights Bolster (LxW): 1500 x 600 mm Bolster thickness: 210 mm Bolster plate: T-slot pitch Bolster material: steel Press bed opening (LxW): 1200 x 160 mm Bridge in machine bed: No Ram size (LxW): 1400 x 420 mm Machining ram: 90 slot pitch Ndjdpfx Aqswhk Dpexoc Dimensions: 2311 x1835 mm Total height: 3780mm Press weight: (approx.) 14,500 kg Strip inlet height: 100 - 140 mm Strip inlet width: max. 280 mm Possible feeds: PV30-200 Cooling: water cooled, for cooling of control cabinet; AC servo main drive; as well as machine oil; connection to existing hall cooling system Press control with the following features: - 15" touch screen with stand. - User-friendly visualized menu navigation - Data import/export - Energy safe / night shutdown - Three-level energy options - User administration - Error log - High resolution coding system - Tool changeover including stored process parameters - TDC shutdown with brake angle calculation over entire speed range - Oil and air pressure display including monitoring - Integration of the press into a process chain via peripheral interfaces -Ethernet interface - USB interface - Backup function - Test stroke - Reverse run - Increased working capacity, i.e. reduction of speed to 80 strokes/min. - Quick lift including automatic approach to quick lift position and the shut height in set-up and continuous mode - Stroke change menu driven - Detection of the working stroke after stroke change with SET/ACTUAL comparison - UPS - for fail-safe operation - Absolute ram position display - Punching area protection with non-contact safety switches - Beckhoff "Twincat 3.1" control system - Beckhoff "TwinSafe" safety controller - water-cooled, for cooling the control cabinet and AC servo main drive * for stable production with fluctuating environmental influences such as heat * minimal heat dissipation inside the sound enclosure due to main drive * no suction and swirling of punching oils and particles through main drive - all electrical cables, connectors, control elements, are professionally installed - Remote support Team Viewer - Internet access through integrated Ethernet interface - Interlinked EMERGENCY STOP function - Extension of the press control for further SYS products on request - Integrated service counters for programmable maintenance intervals and maintenance instructions - 8 customer-specific error messages - 2 peripheral interfaces including power supply *Harting Interface 16A *Harting Interface 32 A - SCHUKO socket outlet 230V 10A

Condition: ready for operation (used), Year of construction: 2011, stroke length: 280 mm, total width: 2,850 mm, total height: 4,800 mm, overall weight: 68,000 kg, product length (max.): 3,550 mm, Mechanical stamping press manufactured in 2011. This HIM HWAIL PRESS HCDS-400 features a press capacity of 400 tons and a stroke length of 280 mm. It includes a slide area of 2600 x 1100 mm and a bolster area of 2700 x 1200 mm. If you are looking to get high-quality stamping capabilities, consider the HIM HWAIL PRESS HCDS-400 machine we have for sale. Contact us for further details. • Press capacity: 400 ton • Rated tonnage point above B.D.C.: 7 mm • Strokes per minute: 35 SPM • Stroke length: 280 mm • Die height: 550 mm • Slide adjustment: 120 mm • Slide area (L x W): 2600 x 1100 mm • Bolster area (L x W): 2700 x 1200 mm • Bolster thickness: 230 mm • Working height: 1200 mm • Side opening: 1100 x 700 mm • Main motor: AC 37 kW x 4 / VS 45 kW x 4 • Slide adjustment motor: 2.2 kW x 4 Ndsdpfoz Stfyex Aqxoc • Required air pressure: 5 kg/cm² • Die cushion capacity: 16 x 2 ton • Die cushion stroke: 130 mm • Pad area (L x W): 1400 x 650 mm Technical Specification Stamping Force 4000 Kn