Used Sigma Laboratory Centrifuge, Refrigerated for sale (7,503)

Condition: excellent (used), Eppendorf 5702 centrifuge in very good condition. The F-35-30-17 rotor is designed for Eppendorf laboratory centrifuges and holds 30 conical Falcon tubes with a 15 ml capacity. This rotor is intended for use with the Eppendorf 5702 and 5702R centrifuges, reaching speeds of up to 4,400 rpm and a maximum RCF of 2,750 x g. Technical details: Rotor model: F-35-30-17 Capacity: 30 conical tubes Tube type: Falcon (15 ml) Rsdpfx Asxatkaommeu Maximum speed: 4,400 rpm Maximum RCF (relative centrifugal force): 2,750 x g

Condition: excellent (used), Hettich ROTINA 420 and 420R laboratory centrifuges are state-of-the-art devices designed for laboratories that require centrifugation of large numbers of samples or samples with large volumes. They are used in medical diagnostic laboratories, research institutions and industrial laboratories. With extensive equipment options, Rotina 420 centrifuges can always be optimally adapted to the current needs in the laboratory. The Rotina 420 R laboratory centrifuge additionally features a high-efficiency cooling system. The main advantages of the ROTINA 420 and 420R centrifuges: centrifugation of slides at up to 15,000 rpm (24,400 x g) capacity of up to 4 x 600 mL (52 x 15 mL / 84 blood collection tubes / 16 microplates) modern, easy-to-use control panel Rsdpfsuptrcsx Ammeu large, easy-to-read display of preset and current operating parameters selectable deceleration and acceleration curves 98 user-defined centrifugation programs self-diagnosis function quiet operation and high stability brushless induction motor guaranteeing many years of maintenance-free operation choice: model without cooling (ROTINA 420) or with efficient cooling system in the range of -20°C to +40°C with pre-cooling and 'stand-by' function (ROTINA 420R) wide range of rotors and accessories: 4 horizontal rotors for tubes and buckets up to 600 mL and microplates and cytology slides 2 angled rotors for tubes up to 250 mL 1 angled rotor for microtubes 0.2-2.0 mL 1 angled rotor for 0.2 mL tubes and PCR strips Rotor on equipment: Hettich Angle rotor 6-place with bio-containment for Benchtop centrifuge

Condition: good (used), Equipped with a patented compression mechanism that minimizes vibrations. Thanks to the FastTemp function, the centrifuge can cool down very quickly (about 8 minutes from 21°C to 4°C). Guaranteed temperature: 4°C at maximum spin speed. Low loading height (21.5 cm) facilitates easy insertion and removal of samples. Rsdstt In Uspfx Ammeu Includes: Rotor: FA-45-24-11 Power cable: EU Max. centrifuge speed: 21,130 x g. Temperature range: -10°C to 40°C. Dimensions: 29 x 48 x 26 cm. Weight: 21 kg (without rotor). Power supply: 230 V / 50-60 Hz. Maximum power consumption: 350 W. Cooling does not work.

Condition: like new (used), The Heraeus Primo R Refrigerated Centrifuge is the perfect centrifuge solution when performing routine analysis in different types of labs. This unit brings you flexibility, efficiency and functionality in a compact, high-performance system all designed to accelerate your sample processes. The Primo R features an imbalance recognition system for improper loading, an EASYcontrol® II control panel for user comfort and user-friendly technology with automatic rotor recognition system. To complete this instrument, we offer a complete selection of rotors and adapters to meet the needs of any lab. Product Features: Touch keypad microprocessor control (EASYcontrol II) Digital display shows all run parameters Variable speed/RCF/time control QUICK RUN key for short spins Choice of 2 acceleration and 9 braking curves for sensitive samples Memory retains current settings Rsdpfxoii Ahxs Ammeu With optional rotor/adapter combinations, accept tubes from 0.2 to 100mL Specifications: Capacity: 400mL (4 x 100mL) Max RCF: 21,885 x g Max Speed: 15,000 rpm; adjustable in increments of 10 Max Noise Level:

Condition: good (used), functionality: fully functional, JOUAN GR 412 is a laboratory benchtop centrifuge designed for use in clinical and research applications. This centrifuge comes equipped with a range of features that make it an ideal tool for quickly and effectively separating particles or compounds of differing molecular weights, densities, or sizes based on their relative centrifugal forces. GR 412 centrifuge has a maximum speed of up to 15,000 RPM and a maximum RCF of 4,440 g. This centrifuge is capable of centrifugal speeds up to 10,000 RPM and provides cut off times up to 60 minutes, depending upon the rotor and speed settings. In addition, JOUAN GR 412 offers a range of different rotors to choose from which can be used depending upon the sample requirements, including fixed angle and swinging bucket rotors. The centrifuge also includes a powerful digital control system that enables precise speed control and RCF, as well as a digital display which shows the programmed settings and any error messages. This centrifuge also has a wide range of safety features, including centrifugal imbalance control and power failure protection, in order to protect against sample loss and damage. The centrifuge is designed for ease of use and comes with a range of useful options, such as an air-cooled condenser which helps to reduce temperature fluctuations and a jacketed chamber, which helps to prevent contamination and cooling. Additionally, the centrifuge can be used with a variety of accessories, including adaptors and adapters. In terms of maintenance, the centrifuge is easy to clean, maintain, and can be wiped down quickly which helps to ensure it remains contamination free. It is also relatively silent which makes it an apt choice for use in quieter environments. Overall, GR 412 centrifuge is a powerful, reliable and easy to use centrifuge that is ideal for general purpose laboratory and clinical applications. With its powerful digital control system, range of safety features, and ease of use, it is a great choice for quickly separating particles and compounds of differing sizes, densities, and molecular-weights. Rjdjqyyl Topfx Ammou

Condition: ready for operation (used), Year of construction: 1986, functionality: fully functional, travel distance X-axis: 1,250 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 750 mm, controller model: Heidenhain iTNC 320, table load: 2,500 kg, rotational speed (max.): 6,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel in X-axis: 1,250 mm Travel in Y-axis: 650 mm Travel in Z-axis: 750 mm Rapid traverse rate X-axis: 15 m/min Rapid traverse rate Y-axis: 15 m/min Rapid traverse rate Z-axis: 15 m/min Table load: 2,500 kg Maximum spindle speed: 6,000 rpm Rodey Sxmtepfx Ammeu Number of tool positions in tool magazine: 40 MACHINE DETAILS Control model: Heidenhain iTNC 320 EQUIPMENT Chip conveyor

Condition: used, Year of construction: 2001, functionality: fully functional, travel distance X-axis: 850 mm, travel distance Y-axis: 480 mm, travel distance Z-axis: 580 mm, total height: 2,990 mm, total length: 4,226 mm, total width: 2,345 mm, table width: 570 mm, table length: 1,000 mm, overall weight: 6,000 kg, Equipment: chip conveyor, documentation/manual, - CE marking present: Yes - CE certificate available: No - Control: CNC - Control system brand: Heidenhain - Control system type: 426-M - Number of axes: 3 - X-axis travel [mm]: 850 - Y-axis travel [mm]: 480 - Z-axis travel [mm]: 580 - Table length [mm]: 1000 - Table width [mm]: 570 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 12,000 - Transport dimensions: 4226 x 2345 mm x 2990 mm (L x W x H) - Transport weight [kg]: 6,000 kg - Cooling system: external cooling + external air blast + ICS (internal coolant supply) - Tool holder SK40 - Magazine capacity: 21 VAT: The indicated price is exclusive of VAT You are welcome to arrange a viewing, the machines are powered up for inspection. Sale is exclusively to businesses, with all warranties excluded (sold as seen). Dismantling, collection and transport are the responsibility of the buyer. A 10-ton overhead crane is available on site. Rsdpfx Asy D Ng Ismmsu Any company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Technical data may deviate and errors in the description are subject to change.

Condition: used, Year of construction: 1999, functionality: limited functionality, travel distance X-axis: 1,250 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 685 mm, total height: 3,030 mm, total length: 4,280 mm, total width: 2,860 mm, table width: 680 mm, table length: 1,400 mm, overall weight: 8,000 kg, Equipment: chip conveyor, documentation/manual, - CE marking available: Yes - CE certificate available: No - Control: CNC - Control system brand: Heidenhain - Control system type: 426-M - Number of axes [pcs]: 3 - X-axis travel [mm]: 1250 - Y-axis travel [mm]: 600 - Z-axis travel [mm]: 685 - Table length [mm]: 1400 - Table width [mm]: 680 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 12000 - Transport dimensions: 2860mm x 4280mm x 3030mm (w x l x h) - Transport weight [kg]: 8000kg - Cooling system: External cooling + external air blast + internal coolant supply (IKZ) - Tool holder: SK40 - Magazine positions: 21 Special feature: Unresolved fault in tool magazine VAT: The stated price is subject to VAT You are welcome to inspect the machine, it is under power. Sale is only to commercial customers, with exclusion of any warranty (sold as seen). Dismantling, collection, and transport are to be arranged by the buyer. A 10-ton overhead crane is available on site. All company names and trademarks are the property of their respective owners and are used for identification and descriptive purposes only. Rsdpsy D Ndajfx Ammsu Deviations from technical data and errors in the item description may occur and are reserved.

Condition: used, Year of construction: 1997, SIGMA MISSION 1 Machining Center FANUC O – M CNC Fully functional and in excellent condition Connected and ready for operation Table size: 750 mm x 400 mm T-slots – number, width, pitch: 3 x 18 x 125 mm Travel: X: 600 mm Y: 400 mm Z: 450 mm Rodpfx Amsxcgyyjmsu Spindle taper: ISO 40 Spindle speed: 6,000 rpm Tool magazine: 16 positions Supplied with various toolholders/tools Includes 2 machine vises Weight: 4,500 kg Year: 1997, complete with full documentation

Condition: ready for operation (used), A CNC vertical machining center Sigma is available. Travel X/Y/Z: 850mm/480mm/580mm, table dimensions X/Y: 1000mm/540mm, max. table load: 7000kg, tool positions: 40, tool holder: SK40, speed: 12000rpm, power: 15kW, torque: 15kW. Machine dimensions X/Y/Z: approx. 3900mm/2200mm/2850mm, weight: approx. 6500kg, control: Heidenhain TNC 426M, operating hours: approx. 15855h. Including chip conveyor and internal coolant supply. Documentation available. An on-site inspection is possible. Rsdpfx Ajy S A N Ejmmju

Condition: good (used), Year of construction: 2015, LIFT SIGMA - C-HOOK MACH-ID 7820 Manufacturer: LIFT SIGMA Type: C-HOOK Year of construction: 2015 Length: 4200mm Width: 1900mm Rodpfxewrzn Hj Ammsu Height: 600mm Weight: 8200kg

Condition: good (used), Year of construction: 2000, functionality: fully functional, Control: Heidenhain TNC 426 Year of manufacture: 2000 Travel X-axis: 800 mm Rsdpfey R Ak Hjx Ammsu Travel Y-axis: 480 mm Travel Z-axis: 580 mm Tool changer: 50 stations Tool holder: SK 40 Spindle speed: 12,000 rpm Coolant through spindle (IKZ) Chip conveyor * approx. 15,855 operating hours

Condition: new, Year of construction: 2021, machine/vehicle number: 218, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, travel distance X-axis: 5,500 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 1,000 mm, controller manufacturer: OSAI, total height: 8,100 mm, total length: 5,100 mm, total width: 3,400 mm, controller model: OPENkey, spindle motor power: 7,400 W, number of spindles: 4, rapid traverse Z-axis: 38 m/min, rapid traverse X-axis: 90 m/min, rapid traverse Y-axis: 54 m/min, spindle speed (max.): 24,000 rpm, spindle speed (min.): 3,000 rpm, Equipment: CE marking, documentation/manual, We've lowered the price!!! NEW PRICE ONLY €130,000!!! This price is valid only until May 28, 2026! Don’t miss this opportunity! We invite you to purchase a BRAND NEW and outstanding 5-AXIS MACHINING CENTER from the renowned manufacturer FANUM. This machining center is specifically designed for the processing of: - wood, - wood-based materials, - aluminum, - plastics, - composites, - materials of similar hardness (CORIAN, DIBOND, MDF, HPL, HIMAX, etc.). We are offering the latest SIGMA model, which comes exceptionally well-equipped. The machine is entirely new. Attached you will find its specification, describing functions, parameters, and production capabilities. FANUM is a manufacturer known for many years for reliability, precision, high performance, and fast processing speeds. The MACHINING CENTER we offer is BRAND NEW. Purchased from FANUM Sp. z o.o. in 2021, it was delivered to our facility directly by the manufacturer. The only use has been the commissioning performed by the FANUM service team—since then, the machine has not been used. Its condition can be described as completely NEW. Our model is equipped to a very high standard and includes virtually everything you might require. A new comparable device currently costs approximately EUR 282,350 net, which is PLN 1,200,000 net. We have direct contact with and support from the manufacturer, FANUM Sp. z o.o. We can also arrange another start-up inspection and demonstration at our location. If required, we can transport the machine to its new owner, and the FANUM team can install and commission the machine at the new site. The proposed price includes the machine itself, but we can also provide a quotation including transport, installation, and commissioning at the new location. In our opinion, the discount we offer—over 40% (more than €117,640 net, approximately PLN 500,000 net) off the cost of a new machine—makes this a particularly attractive opportunity for anyone looking to expand their machinery fleet or who would not have expected, within their machining center budget, to acquire a modern, new, and highly efficient machine. General sales offer remarks: • Although the machine is NEW, it was manufactured in 2021, and we do not provide any guarantee or warranty; • The machine cannot be returned; • The price shown in the listing does not include VAT (23% will be added to the invoice for buyers in Poland); please check how the price is provided in the advertisement; • Single owner. * The price in EUR is based on the NBP exchange rate – 1 EUR = 4.25 PLN. Rjdpfx Amsyn Ri Rjmou Welcome to all MACHINESEEKER platform users. We are new to MACHINESEEKER. We are not a furniture, manufacturing, or machinery trading company. We own several properties in Poland and are active as a developer building homes and apartments in Warsaw (the capital of Poland). The machines offered are our property. We acquired them as settlements with tenants in the furniture industry. We know their history and condition, as described accurately in our listings. We maintain contact with the machine manufacturers, who can provide additional support – such as Homag, Otto Martin, OMC Machinery, and FANUM. Since we have no use for these machines, our prices are very attractive—especially as the machines are practically unused. We can assist with logistics and transport throughout Poland or the EU. Inspection prior to purchase is welcome. Kind regards.

Condition: used, Year of construction: 1996, total height: 2,570 mm, total length: 3,520 mm, total width: 2,350 mm, Empty weight: 6.000 kg Price: On request - Year: 1996 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: M2058 - Drive system: CNC - Number of axes [pcs]: 3 - X-axis travel [mm]: 750 - Y-axis travel [mm]: 420 - Z-axis travel [mm]: 450 - Table length [mm]: 900 - Table width [mm]: 420 - Min. spindle speed [rpm]: 40 - Max. spindle speed [rpm]: 8000 - Transport dimensions: 3520mm x 2350mm x 2575mm (l x w x h) - Transport weight [kg]: 6000kg Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum Rjdpfx Ajw Slaxsmmju

Condition: good (used), Transport shots, crane shot -Spare part: from a machining center, manufacturer Sigma, type Mission 5 -Hole: Ø 140 mm -Recess opening: Ø 80 mm -Bolt circle: Ø 110 mm Redpecnf E Uefx Ammju -Quantity: 4 pieces available -Price: complete -Weight: 23 kg

Condition: new, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 635 mm, feed rate X-axis: 48 m/min, feed rate Y-axis: 48 m/min, feed rate Z-axis: 36 m/min, nominal power (apparent): 40 kVA, rotational speed (max.): 15,000 rpm, overall weight: 7,200 kg, Equipment: documentation/manual, The SIGMA MISSION SMV 1050 Vertical Machining Center is a new and robust machine suitable for a wide range of industrial applications. Equipped with a Heidenhain TNC 620 CNC control, it provides precise and user-friendly operation. Its table dimensions are 1,150 × 560 mm, allowing a maximum load of up to 800 kg/m². The machine offers a wide range of movements, with travels of 1,050 mm on the X axis, 560 mm on the Y axis and 635 mm on the Z axis. This equipment requires an air pressure of 6 to 8 bar for proper operation. With a total weight of 7,200 kg, its solid construction ensures stability during machining processes. The operating power is 40 kVA, indicating a significant but appropriate energy consumption for its capacity and size. The SIGMA MISSION SMV 1050 is a reliable option for companies seeking efficiency and precision in vertical machining operations. Rsdpfxjxgqdqo Ammsu

Condition: excellent (used), Sigma unrolling machine operates on 380 volts. Dimensions: Total length 3.20 m, Height 1.25 m, Depth 1.20 m. Fabric size per side: 0.63 x 0.50 m. Folded dimensions: H 1.45 m x W 1.26 m. Rodjy E Rm Eopfx Ammsu

Condition: good (used), Year of construction: 2000, ENGINE : Manufacturer : KAESER Model : SIGMA 33 Machine type : 90 kW engine Year of manufacture : 2000 Serial no. : 1340, Pressure : 15 bar SCREW STAGE : Manufacturer : SCHORCH Model : KA7317S-8X3Z-350 Machine type : screw stage Year of manufacture : 2000 Rsdpjumadtofx Ammsu - 960kg - 1785 RMP

Condition: ready for operation (used), Year of construction: 2000, - USED - 3-AXIS VERTICAL MACHINING CENTRE WITH PALLET CHANGER X-AXIS TRAVEL: 1250 mm Y-AXIS TRAVEL: 700 mm Z-AXIS TRAVEL: 750 mm DISTANCE SPINDLE NOSE-TABLE: 100 - 850 mm RAPID FEEDS X-Y-Z: 15 m/min Redpfx Asyvlxkjmmju SPINDLE: 4000 rpm; 26 kW; ISO 50 - DIN PALLET: N.2 TABLE SIZE: 650 x 1400 mm MAX ADMITTED LOAD: 1500 Kg HIGH PRESSURE COOLANT: 30 Bar TOOL MAGAZINE: CHAIN-TYPE ; 41 POS MAX TOOL DIAMETER: 120 (200) mm MAX TOOL LENGHT: 400 mm MAX TOOL WEIGHT: 20 Kg CONTROL UNIT: FANUC 16i-M WEIGHT: 16750 Kg OVERALL DIMENSIONS: 7135 x 5300 x 3426 mm ACCESSORIES: SWARF CONVEYOR ; GEAR BOX

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 79115016, The welding robot was virtually never used, as it was no longer required for its intended application. Welding Robot System - CoWelder UR10 Migatronic 79115016 CoWelder UR10 IAC 400C Sigma Product: 79115016 CoWelder™ welding robot system, consisting of: - Universal Robots robotic arm (UR10) - Self-balancing table mounting unit - Migatronic Sigma SELECT 400 C-L Synergy - Welding power source, 400 A, air-cooled, - with graphical control panel, incl. IGC® (Intelligent Gas Control), standard program package (56 characteristic curves), - Function package (DUO Plus, Sequence, Sequence Repeat, Miga Job Control, MigaLog), IAC Intelligent Arc Control, 1.0V, Teflon liner, - Start/stop safety box - Complete cable set - Robotic welding torch including torch holder - Robot control unit incl. operating panel Redpfx Asypbzmjmmou - Freedrive button on the 3rd "wrist" - Pulse function

Condition: used, Year of construction: 1999, machine/vehicle number: M5164, Type Sigma Eccon from Italy X1250 Y650 Z685 Rapid traverse XY 24m, Z 15m / min Spindle 12000 rpm Rjdpfxjhbzmhs Ammju 21 tools magazine HR410 handwheel Heidenhain TNC426 Weight 7500kg

Condition: used, This listing is for the Labnet Spectrafuge 24D centrifuge The unit is in full working condition and is ready for immediate use The Spectrafuge 24D is a compact benchtop centrifuge designed for the efficient separation of a wide range of research samples. Its small footprint makes it ideal for laboratories with limited bench space, while offering the performance and flexibility needed for micro-volume processing. Key Specifications Maximum Speed: Up to 13,300 rpm Maximum RCF (Relative Centrifugal Force): 16,300 × g Rjdpfoxv Dhnex Ammju Capacity: 24 x 1.5/2.0 mL microcentrifuge tubes Motor: Brushless—requires no routine maintenance Timer: Adjustable from 1 to 30 minutes; supports continuous or pulse operation Rotor Type: Easy-access 24-place aluminum rotor, included Adapters Available: For tubes smaller than 1.5 mL (0.5 mL, 0.4 mL, 0.2 mL) Cooling System: Multi-flow air cooling; maintains ambient temperature and is safe for use in cold rooms Control Interface: Digital microprocessor with LED displays; parameters set using two intuitive smart knobs Memory Function: Remembers last run settings Quiet Operation: Engineered for minimal noise Dimensions: 23.5 x 29.2 x 21.6 cm Weight: 8.1 kg Power Supply Options: 120V, 50/60 Hz, 200W, 2.6A (North America) 100V, 50/60 Hz, 190W, 2.7A (Japan) 230V, 50/60 Hz, 170W, 1.2A (Europe/UK)

Condition: used, This listing is for a Thermo Fisher Scientific Sorvall RC6+ Centrifuge The unit is in full working condition and is ready for immediate release. The Sorvall RC 6 Plus is a high-speed, refrigerated floor-standing centrifuge designed for large-volume separations in research, bioprocessing or production labs. According to the manufacturer, it: Is capable of speeds up to 22,000 rpm (which corresponds to about 55,200 ×g) without needing a vacuum system. Handles up to 4 × 1,000 mL bottles in a single run (i.e., ~4 L total) in its standard configuration. Uses a brushless high-frequency motor drive, and has full refrigeration for temperature control. Offers a broad rotor compatibility platform (including composite, aluminium, continuous flow etc) for different In short: this is a heavy-duty centrifuge for larger volumes and higher speeds, suited to labs that need more capacity and performance than benchtop or mid-range units. Key Features & Highlights Here are some of the standout features: Speed & G-force: Up to 22,000 rpm, approx. 55,200 ×g. Capacity: 4 bottles of 1,000 mL (4 L total) in typical configuration. Temperature control: Ability to set in range from -20 °C to +40 °C (in 1 °C increments), and maintain temperature accuracy of ±2 °C. Motor/drive: Brushless high-frequency motor = faster spin up/downs, lower maintenance than older belt drives. Rodpoxukkyefx Ammju Programmability & control: Up to 30 stored programs, with features like real-time control (delayed start/stop), ω² dt (integrator) for reproducibility, pre-cool function, and both rpm and RCF display. Safety & interlocks: Automatic lid-lock when running, door cannot be opened while rotor is spinning, and run terminates automatically in the event of certain malfunctions. Rotor flexibility: Supports a wide selection of rotors (fixed-angle, swinging bottle/bucket, continuous flow), including composite carbon-fibre rotors for higher performance / durability

Condition: used, This listing is for 1 of 2 Millipore Sigma RioS Essential 24 Water Purification Tank These units are in full working condition and is ready for immediate use The RiOs Essential 24 is a compact, efficient RO system that delivers around 480 L/day of consistent Type 3 water. It features minimal maintenance, intelligent self‑management, and smart cartridge monitoring—ideal for routine lab task Key Performance Specs Flow Rate: 24 L/hour (≈ 480 L/day) for non-critical lab uses Purity: Provides Type 3 water with ionic rejection between 95–99% and organic/particulate rejection ≥99% (MW ≥ 200 Da) Purification Process & Internal Features Progard® pretreatment cartridge: Removes particles (>1 µm), free chlorine, hardness, and colloids. High-efficiency RO membrane: Removes dissolved ions, organics, microorganisms, and particulates. Recovery loop: Recycles a portion of reject water to feed, cutting water waste by over 50% compared to conventional RO systems Temperature compensation: Automatically adjusts pump pressure to maintain steady flow across 5–35 °C feed water Design & Operation Redpfjxhfpdex Ammou Footprint: Compact – 47 cm high × 26.8 cm wide × 33.9 cm deep Weight: Net weight ~10.9–12.1 kg; Operating weight ~14.4–15.7 kg Power: 100–230 V AC, 50–60 Hz Feed water specs: Tap water under 2,000 µS/cm conductivity, 1–6 bar pressure, 5–35 °C,

Condition: good (used), Technical data of the CS Sigma profile: Rjdpfxsidchce Ammou Manufacturer: Stow Type: MSNSBG 350/2.0 S 350 GD Included in delivery: 01x CS Sigma profile, used material color: sendz. galvanized total length: approx. 5.500 mm CS Sigma profile: approx. 350 x 85 x 25 x 12 mm material thickness: approx. 2,00 mm