Used Silicone Injection for sale (2,011)

Condition: reconditioned (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: X66924, clamping force: 6,600 kN, screw diameter: 115 mm, clearance between the columns: 1,000 mm, displacement volume: 5,349 cm³, injection pressure: 1,800 bar, injection weight: 5,082 g, opening stroke: 1,200 mm, Used Stork IMM 6600EP-8650 injection molding machine. The machine has been overhauled, tested and repaired. Blodpfx Aowhk Iueqwel

Condition: not inspected (used), Year of construction: 1998, functionality: unexamined, machine/vehicle number: 7814-0045, total length: 4,000 mm, total width: 1,500 mm, total height: 2,000 mm, Weight approximately 3000 kg For sale is a used machine from a site closure. Blodpjzqam Asfx Aqwol Sale is made excluding any warranty for defects. The machine has not been inspected but was operational until the very end.

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, machine/vehicle number: 36567, total length: 8,000 mm, total width: 2,000 mm, total height: 2,500 mm, Weight approximately 21,000 kg Linear robot including peripherals and safety fencing available. A used machine from a site closure is being sold. Sale excludes all warranty claims for defects. Bodpfszqagiox Aqwjll The machine has not been inspected but was operational until the end.

Condition: used, Year of construction: 2013, functionality: limited functionality, overall weight: 18,500 kg, We are offering this used KraussMaffei 200-750 EX injection molding machine, manufactured in 2013. Type: KM 200-750 EX International size designation: KM 750 EX/200 Year of manufacture: 2013 Machine No.: 61019432 Machine weight: 18,500 kg Bodpfxozxk Rus Aqwjll Please note: The machine is sold without machine conformity, as the safety door on the operator side is missing. The control panel is mounted on the rear of the machine. If you have any questions or require further information, please do not hesitate to send us a message or call us.

Condition: like new (used), Year of construction: 2019, operating hours: 11,337 h, functionality: fully functional, machine/vehicle number: 234917, clamping force: 1,600 kN, screw diameter: 30 mm, Equipment: documentation/manual, ENGEL eMotion 160 from a cleanroom injection molding facility, with only 11,300 operating hours and in like-new condition. The machine was used for the production of 64-cavity pipette molds at NYPRO (Jabil) in Knittlingen and is in like-new condition. This is the last available unit from an original total of 90 machines. It was originally intended for another NYPRO plant but has now been released for sale as part of a site relocation. • The order confirmation from ENGEL to NYPRO can be found in the documents. Bledswb Dl Tepfx Aqwol The original new price was approximately €330,000. The selling price is €78,500 including crane. I can provide you with the technical data upon request, but it is also available in the documents below. Included in the price: Dismantling the crane onto two Euro pallets, as well as removing the machine from the cleanroom and loading it onto your truck using a 15-ton forklift. If you are interested or have any questions, please do not hesitate to contact me. The machine is located near Karlsruhe and can be inspected there. Delivery is possible within a few days. You can find the order confirmation from ENGEL to NYPRO in the documents below!

Condition: not inspected (used), Year of construction: 1991, operating hours: 108,378 h, functionality: unexamined, total length: 8,000 mm, total width: 2,200 mm, total height: 2,500 mm, overall weight: 20,200 kg, For sale is a used machine from a site closure. Blodpfx Aqezrczljwol Sale is made with the exclusion of any warranty for defects. The machine has not been inspected but was in working order until the end.

Condition: used, Year of construction: 2018, Serial no. 221921, control system, manufacturer Engel, type CC300, clamping force 1,700 t, 2 injection units, rotary table, installation height min./max. 800 - 1,600 mm, platen distance 3,350 mm, clear width horizontal/vertical 1,850 / 1,415 mm, 16 cascades, 64 hot runner nozzles, core pulls hydr. 4 (DS) / 4 (AS), screw diameter 105 / 50 mm, shot weight 4,050 / 410 g, operating hours 22,401, machine weight 75,400 kg, mold temperature control unit, manufacturer Oni, type Rhytemper FlexControl 32, 4x 8-channel block modules 125 °C, 6-channel block modules 125 °C, visualization unit, parts removal handling system, manufacturer Engel, type Viper 60, 5 axes (X, Y, Z, C, B axis), nozzle spacing 300 mm, year of manufacture 2018, serial no. 221938, part enclosure, discharge conveyor, mobile conveyor, manufacturer Engel, type BGR FB100 KMAT, year of manufacture 2018, serial no. 2144098, length approx. 4,200 mm, width 1,000 mm, external temperature control unit and material dosing system are not included in this item. Damages: hydraulic hoses leaking. Blodpfx Aqjy I R Tqowol +++ Attention: Machine is part of an online auction! +++

Condition: excellent (used), functionality: fully functional, Manufacturer: KRAUSS MAFFEI Type: KM 420-1900 C2 Control: MC 4 Year of manufacture: 2005 Operating hours: 59,000 h Technical data, clamping side Clamping force: 4200 kN Tie bar distance h x v: 800 x 800 mm Bledpfx Aezypawsqwsl Platen size h x v: 1270 x 1200 mm Minimum mold thickness: 580 mm Maximum mold thickness: 1300 mm Opening stroke: 720 mm Ejector stroke: 250 mm Ejector force: 95 kN Centering of moving platen D: 200 mm Centering of fixed platen D: 200 mm Tool weight: 6700 kg Technical data, injection side Screw diameter: 60 mm Injection volume: 769 ccm Injection pressure: 2200 bar Screw length: 23 l/d Screw speed: 285 min Plasticizing rate: 70 g/s Injection rate into free air: 700 g/s Number of heating zones: 6 Dimensions & Weight Machine dimensions L x W x H: 6.83 m x 2.33 m x 2.48 m Total weight: 23090 kg Equipment • Screen text in German • Hydraulic core pull, 4x • Machine without handling system • Machine without material hopper • Leveling elements • Tool heating, 12x

Condition: excellent (used), Year of construction: 2007, clamping force: 2,000 kN, screw diameter: 55 mm, injection pressure: 2,183 bar, injection weight: 562 g, mold height (min.): 400 mm, ejector stroke: 180 mm, Engel VC 1350/200 Tech Clamping force: 200 tons Year of manufacture: 2007 Weight: 14,200 kg Dimensions (L x W x H): 6.3 x 1.9 x 2.3 m Bljdpfszt I Srsx Aqwjl Injection unit: .../1350 Screw diameter: 55 mm Injection volume: 618 cm³ Shot weight (for PS): 562 g Specific injection pressure: 2,183 bar Mould clamping system: 200/... Mould platen dimensions: 860 x 570 mm Mould installation height: 400 mm Opening stroke: 750 mm Maximum platen distance: 1,150 mm Ejector stroke: 180 mm Ejector force: 80 kN Equipment: - 2 × hydraulic core on moving platen - Pneumatic valve - 8 hot runner zones - 8-section rotameter

Condition: excellent (used), Manufacturer: ARBURG Type: Allrounder 375 V 500-170 Control system: Selogica-direkt Year of manufacture: 2013 Operating hours: 36163 h Technical data, clamping unit Clamping force: 500 kN Minimum mold height: 200 mm Maximum mold height: 550 mm Maximum mold thickness: 302 mm Opening stroke: 225 mm Rotating platen diameter: 900 mm Ejector force: 70 kN Centering of moving platen diameter: 125 mm Mold weight: 230 kg Technical data, injection unit Screw diameter: 25 mm Injection volume: 59 cm³ Injection pressure: 2500 bar Screw length: 24 l/d Blodpfx Aqjzyn Exswel Screw speed: 35 rpm Screw torque: 210 Nm Number of heating zones: 5 Dimensions & Weight Machine dimensions L x W x H: 3m x 1.6m x 3.48m Total weight: 3540 kg Equipment • Screen text in German • Rotating platen • Hydraulic core pull (1x) • Machine with water manifold • Machine without material hopper • Leveling elements • EUROMAP 67 handling interface • EUROMAP 73 interface • Interface for ejector plate locking

Condition: like new (used), Year of construction: 2019, operating hours: 399 h, functionality: fully functional, clamping force: 2,200 kN, screw diameter: 48 mm, clearance between the columns: 650 mm, displacement volume: 318 cm³, injection pressure: 1,900 bar, mold height (min.): 250 mm, ejector force: 35,000 N, ejector stroke: 150 mm, opening stroke: 550 mm, plate length: 900 mm, plate width: 900 mm, total height: 2,800 mm, overall weight: 10,700 kg, Equipment: documentation/manual, FANUC ROBOSHOT Alpha S-220iA – fully electric injection moulding machine, year 2019 Very lightly used precision injection moulding machine with only 399 operating hours. The FANUC ROBOSHOT Alpha S-220iA combines high repeatability, dynamic movements and energy-efficient production. Suitable for demanding technical plastic parts and reliable series production. Technical data: - Clamping force: 2,200 kN (220 t) - Double-toggle clamping mechanism - Tie-bar spacing: 650 × 650 mm - Platen size: 900 × 900 mm - Mould height: 250–750 mm, extended version - Clamping stroke: 550 mm - Ejector stroke: 150 mm - Maximum ejector force: 35 kN - Screw diameter: 48 mm - Shot volume: 318 cm³ - Maximum injection speed: 200 mm/s - Maximum injection pressure: 1,900 bar - Locating ring: Ø 160 mm - Fully electric drive Bsdpfx Aeznd Dyeqwell Control and equipment: - FANUC 31i-B CNC control - 15-inch LCD touchscreen - AI mould and ejector protection - Precision metering and pressure-profile functions - Automatic mould-height adjustment - Energy-consumption measurement - Euromap 67 robot interface - Three independent air valves - Cascade control for up to eight valves - USB and memory-card output - Four-circuit flow meter The machine is in like-new condition and fully operational. Inspection is available by appointment. Price, delivery time and further information are available on request.

Condition: used, Year of construction: 1999, functionality: fully functional, clamping force: 400 kN, screw diameter: 30 mm, clearance between the columns: 250 mm, column diameter: 50 mm, opening stroke: 480 mm, plate length: 450 mm, plate height: 500 mm, total length: 2,200 mm, total width: 1,200 mm, total height: 1,800 mm, overall weight: 2,800 kg, type of input current: three-phase, input frequency: 50 Hz, input voltage: 400 V, Complete plastic molding line OLEOPRESS OP/Z 40 press + 3M OPZ 50 oven + PGV thermoregulator For sale: a complete line for plastic molding, consisting of: OLEOPRESS OP/Z 40 hydraulic injection press 3M OPZ 50 industrial electric oven PGV RHC7 mold thermoregulator Machines are in working order and can be inspected on site. INJECTION PRESS Manufacturer: OLEOPRESS S.r.l. (Italy) Model: OP/Z 40 Year: 1999 Clamping force: 400 kN (40 tons) Configuration: Horizontal – 4 columns Technical data: Distance between columns: 250 × 300 mm Column diameter: 50 mm Maximum opening stroke: 480 mm Plate dimensions: 400 × 500 mm Cylinder heating capacity: approx. 6–8 kW Power supply: 400 V – 50 Hz – 100 A – three-phase Air line pressure: 10 bar Estimated weight: approx. 2,800 kg INDUSTRIAL OVEN Manufacturer: 3M Forni Industriali (Italy) Bodjzpbc Aspfx Aqwsll Model: OPZ 50 Power supply: 400 V Installed power: 36 kW (18 + 18 kW) Maximum temperature: 650°C High-temperature industrial electric oven, suitable for: mold preheating post-curing polymerization of thermosetting materials MOLD THERMOREGULATOR Manufacturer: PGV srl (Italy) Model: RHC7 Power supply: 400 V Rated current: 28.6 A Interrupting capacity: 17.6 kA Unit for controlling mold temperature during the production cycle.

Condition: not inspected (used), Year of construction: 2002, functionality: unexamined, machine/vehicle number: 45719, total length: 9,000 mm, total width: 2,300 mm, total height: 2,500 mm, overall weight: 33,500 kg, Handling including linear robot. Automation is not included but can be purchased separately upon request. Automation is integrated; programming work may be required. For sale is a used machine from a site closure. Blodezrd Ugjpfx Aqwel Sale is made excluding any warranty for defects. The machine has not been tested but was operational until the end.

Condition: good (used), Year of construction: 2004, Ref. no.: 18255 Manufacturer: ENGEL Type: Victory 750 / 180 tech Year of construction: 2004 Clamping unit Bodpfx Aewm Iz Neqwjll Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009 Further information: ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility. Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system. ⸻ 🔍 Advantages of the ENGEL Victory Series ✔ Tie-Bar-Less Design The biggest advantage of the world-renowned ENGEL Victory series is its tie-bar-less construction. This system offers several important advantages: • Larger moulds can be installed easily • Easier access for complex mould geometries • Reduced mould changeover times • Easier robot integration • More efficient use of production space This technology is especially advantageous for automotive, technical plastic parts, packaging and industrial applications. ⸻ ✔ Wittmann Robot Integration The machine has been operated together with a Wittmann robot. Robot specifications: • Wittmann W743-0424 • Year of manufacture: 2009 • Payload capacity: 25 kg • X-axis: 1200 mm • Y-axis: 1600 mm • Z-axis: 4000 mm This configuration provides major advantages for automated production processes. ⸻ 🔍 Machine Operating System The ENGEL Victory Tech series operates with a servo-hydraulic system. ✔ Hydraulic System: • Clamping unit • Injection movements • Ejector system • Mould movements are driven by a high-performance hydraulic system. ✔ Thanks to the servo-controlled hydraulic system: • Only the required amount of energy is consumed • Power consumption is significantly reduced • Quieter operation is achieved • Production stability is improved Unlike older conventional hydraulic machines, the machine does not run continuously at full power. The servo pump system operates only when needed, providing the following advantages: • Lower energy costs • Reduced heat generation • Longer component lifetime • More stable processing conditions

Year of construction: 2019, condition: used, For sale: a partial injection molding cell consisting of a hydraulic press, a linear Cartesian robot, and a perimeter safety fence. This system is ideal for those seeking a ready-to-use package for molding and automatically unloading parts. The package includes only the 3 items listed below: 1. HYDRAULIC INJECTION MOLDING MACHINE Brand and Model: ARBURG ALLROUNDER 520 C 2000-675 Year of manufacture: 1998 Clamping force: 2,000 kN (200 tons) Screw diameter: 50 mm Distance between columns: 520 × 520 mm Platen size: approximately 715 × 715 mm Bjdpszw H Dbefx Aqwsll Opening stroke: approximately 650 mm Control: SELOGICA Machine weight: approximately 6,500 kg 2. LINEAR CARTESIAN ROBOT Brand and Model: STAR AUTOMATION XW-1000VI 2V Year of manufacture: 2019 Configuration: 3 servo-assisted linear axes (brushless motors), space-saving telescopic vertical arm. Included: Control cabinet, original operating keyboard (remote control) for programming, and manuals. 3. PERIMETER SAFETY FENCE Manufacturer: Star Automation Europe Features: Modular structure with a metal mesh to protect the work area. Access door equipped with safety microswitches and an interlocked electric lock. Included: External control panel for access requests and emergency chain reset.

Condition: excellent (used), Year of construction: 2013, Haitian Mars II 7000/2950 Injection Moulding Machine Year of manufacture: 2013 Blsdpsw U Tyljfx Aqwjl The machine is equipped with an injection unit offering 7000 kN clamping force and a specific injection pressure of 1580 bar. It features a mixing screw with a diameter of 80 mm, allowing for a maximum stroke volume of 1860 cm³ and a maximum shot weight (for PS) of 1692.6 g. The screw rotation speed reaches up to 200 rpm, and the plasticizing capacity (for PS) is 76.8 g/s. The cylinder heating power is 38.35 kW. The clamping system enables mould installation with a mould height range from 400 to 940 mm and a clearance between tie bars of 940 × 960 mm. The opening stroke is 970 mm. Mould centring on the A.S. and D.S. sides is 200 / 200 mm. The ejector stroke stands at 260 mm (stroke) and 200 mm (passage). Equipment includes core drives: - on the moving platen – 2 units, - on the fixed platen – 2 units.

Condition: excellent (used), Year of construction: 2007, clamping force: 1,000 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, injection pressure: 1,865 bar, injection weight: 192 g, mold height (min.): 200 mm, ejector stroke: 100 mm, Year of manufacture: 2007 Injection shot weight: 192g Injection unit 410 Screw diameter: 40 mm Specific injection pressure: 1865 bar Injection volume: 217 ccm Injection shot weight: 192 g Screw L/D ratio: 20 Mold closing unit 100 Mold plate dimensions: 600x600 mm Distance between columns: 420x420 mm Ejector force: 35 kN Mold height: 200 mm Ejector stroke: 100 mm Blsdpfxezt I Rno Aqwel Weight: 5000 kg Control system: NC4 Tooling: - 2 x hydraulic core - pneumatic valve - Euromap 67 connector

Condition: excellent (used), Year of construction: 2006, ENGEL DUO 7050/1100 Advanced Injection Moulding Machine Year of manufacture: 2006 Control system: ENGEL EC100 / CC100 (microprocessor-based) Key Technical Specifications Clamping force: 11,000 kN Platen dimensions: 1,850 × 1,810 mm (width × height) Tie bar spacing: 1,400 × 1,150 mm (horizontal × vertical) Bljdpfx Aqjw U Tcmjwjl Mould height: 400 – 1,200 mm Variant A: Reduced minimum mould height to 400 mm (–200 mm) Maximum opening stroke: 1,800 mm Screw diameter: Ø105 mm L/D ratio: 22 (M3 barrel), optionally L/D = 24 (extended M3 barrel) Injection volume (max): 4,160 cm³ Injection weight (PS, max): 3,830 g Injection pressure (max): 2,090 bar Plasticising rate: 112 g/s (for PE-HD, L/D = 22) Injection nozzle: Herzog, needle type, pneumatically actuated shut-off, HP1.1 type, Ø12 mm orifice, M30×2 thread, adapter for ENGEL; no standard nozzle supplied Injection Unit Two injection cylinders with compact design M3 plasticising barrel, bimetallic, corrosion and wear resistant, operating temperature up to 350°C S4V screw Ø105 mm, heat-treated, nitrided, chrome plated, with hardfacing; R9 non-return valve 2D mixing head Ø105 mm TMR mixer Ø105 mm Material hopper with a capacity of 300 l and magnetic grid Clamping Unit Hydromechanical, two-platen system Four high-pressure short-stroke cylinders on nozzle side Four locking nuts on the ejector side Two rapid traverse cylinders (diagonal assembly) Special platen design – horizontal and vertical knockout holes Mould cooling: 10-fold rotameters (0-30 l/min), total of 20 circuits (10 per platen) Variant A: Reduced minimum mould height to 400 mm, maximum daylight maintained (2,400 mm), and increased opening stroke

Condition: excellent (used), Year of construction: 2016, operating hours: 2,000 h, functionality: fully functional, clamping force: 3,200 kN, screw diameter: 65 mm, clearance between the columns: 680 mm, displacement volume: 929 cm³, injection pressure: 2,130 bar, injection weight: 845 g, ejector force: 62,000 N, ejector stroke: 160 mm, plate length: 680 mm, plate height: 680 mm, total length: 7,010 mm, total width: 1,700 mm, total height: 2,250 mm, overall weight: 13,500 kg, type of input current: AC, input frequency: 50 Hz, input voltage: 400 V, The Haitian Mars Series MA3200 (available in generations II and III, as well as an Eco variant) is a servo-hydraulic injection molding machine with a clamping force of 3200 kN (320 US tons). The machine was in operation at an R&D test center in Israel for quality control purposes. The machine operated without any issues until it was deactivated in June 2026. Blodpozww D Sjfx Aqwjl You can find an exact specification in the documents. Delivery terms: EXW Israel – Zeelim, unpacked on the ground, transport and packaging at the buyer's expense.

Condition: excellent (used), Year of construction: 2010, Injection Moulding Machine ENGEL DUO 5550/1100 Robot: ERC 200 Year of manufacture: 2010 Operating hours: approx. 79,000 h Clamping force: 1,100 tons Injection Unit – 5550 Screw diameter: 90 mm Injection pressure (specific): 2,180 bar Injection volume: 2,740 cm³ Screw L/D ratio: 22 Cylinder: type M3, bimetallic – increased wear and corrosion resistance Screw: type S4V, heat-treated, chrome-plated, with armoured edges – high wear and corrosion resistance Clamping Unit – DUO 1100 Clamping force: 1,100 tons Distance between tie bars: 1,400 x 1,150 mm Mould height: from 600 mm to 1,200 mm Ejector stroke: 300 mm Equipment Hydraulic cores: 2+1 Pneumatic cores: 1+1 GK heating zones: 3 x 8 = 24 zones Blsdpfew U Sz Iex Aqwsl Rotameters: 20 circuits Control system: CC 200 A02 Installed programs: - Micrograph Plus - Microplast - QDP - PD Graphics II Robot ERC 63/1-F, RC 200 X-axis: 1,300 mm Y-axis: 1,800 mm Z-axis: up to 2,840 mm C-axis: rotary movement 0–90° 2 vacuum circuits 1 pressure circuit for sprue removal

Condition: good (used), Year of construction: 2000, clamping force: 1,600 kN, screw diameter: 35 mm, clearance between the columns: 520 mm, Basic data Clamping force: 160 t Year of manufacture: 2000 Control system: Selogica Injection weight: 154.7 g Bjdezt Ikbopfx Aqwoll Injection unit .../675 Screw diameter: 35 mm Injection volume: 170 cm³ Injection weight: 154.7 g Mold clamping unit 160/... Clamping force: 160 t Mold plate dimensions: 728 × 728 mm Distance between columns: 520 × 520 mm Mold height: 250 mm Opening stroke: 650 mm Maximum mold plate distance: 900 mm Ejector force: 50 kN Ejector stroke: 175 mm

Condition: not inspected (used), Year of construction: 2012, functionality: unexamined, machine/vehicle number: 17659, total length: 11,000 mm, total width: 3,000 mm, total height: 2,600 mm, overall weight: 40,000 kg, Includes handling equipment, peripherals, and conveyor belt. Bledezrd Slopfx Aqwjl A used machine is being sold as part of a site closure. Sale is made excluding any warranty for defects. The machine has not been inspected but was in working order until the end.

Condition: used, Year of construction: 1998, operating hours: 99,161 h, clamping force: 32,000 kN, screw diameter: 130 mm, injection weight: 8,100 g, total length: 4,900 mm, total height: 4,200 mm, overall weight: 230,000 kg, # Sales Description A high-performance injection molding machine from the German manufacturer KraussMaffei is available for sale. This is the KM 3200-19000 MC model, specifically designed for the production of large-sized plastic components and industrial series manufacturing. The machine offers very high clamping force and is particularly suitable for applications involving technical plastic parts or large-scale items. The machine features a clamping force of 32,000 kN, a screw diameter of 130 mm, and a maximum shot weight of 8,100 g. This allows for the efficient production of large parts with high material requirements. In addition, the system is equipped with extensive peripheral equipment, including a robot interface for KUKA KRC4, a S.I.S.E. IS’Tech sequential injection controller, GWK temperature control units, and a Motan Colormetric dosing and mixing system. A belt conveyor is also included in the package. Technical Data * Manufacturer: KraussMaffei * Model: KM 3200-19000 MC * Machine No.: IMM MC3F No.12 * Year of manufacture: 1998 * Operating hours: approx. 99,161 h Performance * Clamping force: 32,000 kN Bljdpfx Aqjyt H Dhswel * Screw diameter: 130 mm * Max. shot weight: 8,100 g Dimensions and Weight * Machine weight: approx. 230,000 kg * Machine depth: approx. 4,900 mm * Machine height: approx. 4,200 mm The machine represents a robust and proven solution for industrial plastics processing and is especially suitable for manufacturers requiring large-format injection molding capacity. Further information, photos, or inspection appointments are available upon request.

Condition: excellent (used), Year of construction: 2006, clamping force: 500 kN, screw diameter: 22 mm, clearance between the columns: 355 mm, overall weight: 2,700 kg, Clamping force: 50 t Year of manufacture: 2006 Injection unit .../200 Screw diameter: 22 mm Specific injection pressure: 2800 bar Injection volume: 41.8 ccm Mould clamping system 50/... Clamping force: 50 t Mould plate dimensions: 520 x 520 mm Tie bar clearance: 355 x 355 mm Bodpfx Aozt Ih Tjqwsll Mould height: 210 mm Opening stroke: 400 mm Maximum platen distance: 610 mm Weight: 2700 kg Dimensions (m) L x W x H: 3.8 x 1.1 x 2.1 m Control: NC4

Condition: excellent (used), Year of construction: 2011, ENGEL DUO 5550/1100 Injection Moulding Machine Year of manufacture: 2011 Injection unit Two short-barrel cylinders for plastic injection. Direct screw drive; ceramic heaters on cylinders. Standard screw geometry L/D = 22. Hardened and nitrided screw, diameter Ø 90 mm. Maximum injection volume: 2,740 cm³. Maximum shot weight (PS): 2,520 g. Open nozzle: front radius R = 35 mm, channel diameter Ø 6 mm, mounting thread M55×3. Increased specific injection pressure: 2,180 bar. Plasticizing capacity: 85 g/s (for polystyrene, screw Ø 90 mm). Injection unit equipment: M3-type barrel – bimetallic, increased corrosion and wear resistance, permissible temperature up to 350°C. S4V-type screw – heat-treated, chrome-plated, with armoured edges; increased resistance to corrosion and wear. Special G11.3 screw geometry optimized for processing. R12 non-return valve (multi-ball, recommended for PC, PMMA, ABS). Clamping unit (clamping system) Hydromechanical dual-platen clamping system. Blsdjw U Taxopfx Aqwsl Four short high-pressure cylinders on the nozzle side. Four tie-bar tensioners on the ejector side. Two diagonally mounted fast movement cylinders on the clamp unit. Opening stroke dependent on mould height (dynamic stroke adjustment). Moving platen guided on the machine frame – ensures platen rigidity and parallelism. Clamping force: 11,000 kN. Mould mounting platen dimensions: 1,850 × 1,810 mm. Tie bar spacing: 1,400 × 1,150 mm. Mould mounting height: 600–1,200 mm. Maximum opening stroke: 1,800 mm. Mould cooling system: 10 water circuits with rotameters (max. 30 l/min each). Special execution of platens with additional holes for ejector systems in two arrangements (horizontal and vertical). Core pull drives (core pull systems) Independent hydraulic core pull drives: 2 units on the moving platen, 2 units on the fixed platen. Hydraulic pressure reduction systems for core pulls. Independent pneumatic core pull drive on the moving and fixed platens. Hydraulics Pump station with electrohydraulic pressure and flow regulated pumps, and fixed delivery pumps. Energy-saving proportional hydraulics with precise flow and pressure control. Servo valve for injection speed, holding pressure, and back pressure control. ECODRIVE system – energy-efficient hydraulic drive enabling parallel auxiliary movements with minimal energy consumption. ENGEL Viper 40 Robot Integrated Cartesian robot, operated via CC200/RC200 control panel. Three servo-driven axes: X = 700 mm (extendable to 900 mm), Y = 1,000 mm (tandem up to 1,900 mm), Z = 1,880 mm (extendable up to 5,720 mm). Payload up to 17 kg, accuracy ±0.05 mm. C axis: 0–90° rotating gripper, pneumatic drive. B axis: rotation of head around lift axis (Y), servo motor drive, range +90° / –180°.