Used Silikontech Gasket, Silicone Gaskets for sale (273)

Condition: ready for operation (used), Year of construction: 1995, functionality: unexamined, total length: 1,860 mm, total height: 1,500 mm, total width: 800 mm, type of input current: three-phase, input voltage: 400 V, input current: 27 A, power: 12 kW (16.32 HP), input frequency: 50 Hz, nominal power: 13 kW (17.68 HP), Thermal Shrink Tunnel HV 400 - Used machine, built in 1995 - Inspected, tested, and fully operational This high-performance shrink tunnel is designed for energy efficiency. The heating system and adjustable settings are highly variable, allowing for precise shrinking of film-wrapped products with various shapes and contours. Operating principle The thermal shrink tunnel operates with separate blowers for independently adjustable upper and lower heating. The machine is equipped with an electronic temperature controller and is designed for a maximum internal temperature of up to 250 °C. The conveyor speed is infinitely variable. Technical data Passage width: 400 mm Passage height: 130 mm Hood length: 1,000 mm Conveyor length: 1,860 mm Redpfoy H Dxkox Ad Ajt Rod conveyor: Rotating rods with silicone coating, every second rivet fitted Power supply: 380 V three-phase, 50 Hz Heating capacity: Selectable from 2 - 10 kW Connected load: 12 kW Color: Hammertone light grey Additional equipment: Temperature control with electronic regulator and contactless relay for precise temperature consistency Pressure rollers at the discharge end

Condition: ready for operation (used), Year of construction: 2008, functionality: unexamined, type of input current: three-phase, input voltage: 400 V, input current: 27 A, power: 19 kW (25.83 HP), input frequency: 50 Hz, nominal power: 19 kW (25.83 HP), heating capacity: 18 kW (24.47 HP), Beck Packautomaten HV601 HPLS Year of manufacture: 2008 Rsdpfxjy H Ddaj Ad Aet Pass-through width: 600 mm Pass-through height: 420 mm with pressure rollers at the outfeed Transport rods: 15 mm with 19 mm silicone coating Rod pitch (center to center): 38 mm Hood length: 1700 mm Overall length: approx. 2100 mm Conveyor speed: infinitely adjustable Connected load: 19 kW As shown in the photos

Year of construction: 2012, condition: used, functionality: fully functional, machine/vehicle number: 479 6475, Welding Machine Data: Model: MSE-III-F-EP-SB-200-250 Machine no.: 7739 Year of manufacture: 2002 The welding machine is equipped with: - All welding times can be set according to profile requirements. Rodpfx Adjy Eyqte Aet - Welding accuracy: 0.2 mm on the external dimension. - Clamping plates heated with interchangeable limit stops on the welding mirrors. - Automatic, movable limitation stops (white: 1.2 mm, colored: 0.5 mm). - Shims with adjustable gasket knives. - Gasket former for shaping and notching the inside corners. - Minimum welding dimension with thicker shims: 330 x 500 mm. - Maximum welding dimension: 3800 x 3300 mm. - Heads retract for easy profile insertion. - Set to 5 mm welding bead (2.5 mm on each side). The cleaner is equipped with: - Four-axis cleaning unit for rapid finishing operations. - Automatic turning station with a gripping arm for gentle rotation of large, heavy elements. - Automatic turning for elements up to 3,000 x 3,000 mm. - Manual operation without the cleaning unit for small elements or U-frames. Top tool carrier: - Gasket groove milling cutter. - V-groove peeling knife. - Peeling knife for 3 mm grooves. - Inside corner knife, standard projection. - Inside corner knife, rounded projection. - Inside corner knife with groove. - Horizontal secondary milling for central gasket. Bottom tool carrier: - V-groove peeling knife. - Peeling knife for 3 mm grooves. - Gasket groove milling cutter. - Inside corner knife, standard projection. - Inside corner knife, rounded projection. - Peeling knife for half-offset surfaces. - Outer contour disc for external corners. The machine is set up for the BluEvolution 82 system by Salamander and Elegante by Deceuninck. The machine is sold for pickup and self-dismantling only. Sale only to business customers.

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, 2000 Arburg projector. 130 tons of closing force. The machine is delivered completely reconditioned in our facilities in Heras (Cantabria). New gaskets in the sealing body. We can show it in operation. Technical details CLOSING POWER 1300 kN PLATE DIMENSIONS 660x840 OPENING STROKE 575mm MAXIMUM DISTANCE BETWEEN PLATES 800/850 DISTANCE BETWEEN COLUMNS 420x420/470x470 SPINDLE 50mm INJECTION VOLUME 353cm3 INJECTION WEIGHT 117 Rodorxtpdspfx Ad Aot YEAR OF MANUFACTURE 2000 INJECTION PRESSURE 2500bar

Condition: used, Year of construction: 2010, Used machine Year of manufacture: 2010 Features and technical data: Right-hand version 2 auxiliary tables are still in original packaging H&H / HARDO TH 1020-V46 BV DA (twin system) Maximum application width: 2,040 mm (2 × 1,020 mm) Design: Twin system, both machines can also be operated individually Application roller: reinforced version Application roller diameter: 46 mm Application roller knurling: 0.5 mm Bearings: reinforced roller bearings Bearing shells: hardened Scraper: pneumatically actuated, needle bearings Main bearing lubrication: routed externally, to be filled with a manual grease gun Container seal: adjustable and replaceable without removing the application unit Application speed control: via frequency converter Speed range: 3.2 – 19.3 m/min Control: potentiometer Display: digital speed display Pressure rollers: 2 pieces, silicone-coated Pressure roller length: 2,040 mm Pressure roller diameter: 159 mm Pressure roller actuation: pneumatic Automatic lowering of pressure rollers when drive motor is switched off Height adjustment for material clearance: electromechanically, manual inching mode Applicator unit stroke: 0 – 200 mm Conveying height: 925 mm (underside of material) Pressure roller drive: separate drive Motor: including motor mounting, fastening, and enclosure Additional application speed control: via separate frequency converter Additional speed range: 3.2 – 19.3 m/min Additional control: potentiometer Additional display: digital speed display Base frame: aluminium profile system Stands: 2 pieces, anodised aluminium plates Adjustable feet: adjustment range ±25 mm Material feed direction: right to left Heating control: programmable timer (daily and weekly program) Temperature control: electronic with digital actual value display Melt tank capacity: 2 × 25 litres Heating power: 2 × 8.0 kW Nominal power: 18.5 kW Control voltage: 24 V Nominal frequency: 50 Hz Operating voltage: 400 V Phases: 3 Fuse: 63 A Compressed air connection: < 8 bar Redpfxoy E Avlo Ad Aet Application: Melting and applying non-reactive hot-melt adhesives Weight: 1,560 kg Availability: short-term Location: Rhineland-Palatinate

Year of construction: 2024, condition: used, Manufacturer : IMMEQUIP Engineering Model : CEMH-LAM360 Year : 2024 Type : Cutter / Laminator Structure & design: All-stainless steel 304L mechanically welded frame Fitted with 4 swivel wheels with brakes Fully enclosed machine (compliant with 2006/42/EC) Access secured by coded magnetic sensors Dimensions Longueur totale : 3550 mm Hauteur tapis entrée : 1025 mm (±15 mm réglable) Hauteur tapis sortie : 737 mm Largeur bandes : 360 mm Convoyage : Tapis d’entrée - Bande NEOBELTING silicone blanc - Température max : 90°C en continu - Vitesse : 17 m/min - Motorisation : 0,37 kW – triphasé 400V - Option fournie avec la machine : guidage produits par peigne inox + rouleaux presseurs (voir photo) Conveyor system: Exit conveyor - White silicone NEOBELTING belt - Speed: 43 m/min - Motor: 0.37 kW – three-phase 400V - Integrated air blow-off ramp Cutting unit - Cutting wheel Ø350 mm - 3 blade holders (45° and 90°) - Hardened and ground steel blades (Z30C13 – 40/42 HRC) Rsdpfxey D Ugyo Ad Ast - Rotation speed: 72 rpm - Motor: 0.37 kW – three-phase 400V - Stainless steel housing with adjustable pressure roller - Stainless steel roller guide - Cutting kit options: 90° and 45° Product orientation kit: 2 symmetrical sets, each comprising 1 cell, 1 stop flap and 1 pneumatic cylinder Laminating / rolling function - Hollow stainless steel roller, Ø140 x 350 mm - Motor: 0.12 kW - Speed: 29 m/min - Precise gap adjustment (1 to 30 mm) - Adjustable anti-clogging scraper Conveyor system: Intermediate conveyor - HABASIT belt, type WVT-140 - Speed: 29 m/min - Motor: 0.18 kW - Stainless steel drum, Ø44 mm - Tension and position adjustment Power supply: Three-phase 400V – 50 Hz SIEMENS G120C frequency converters (x5) SIEMENS 7-inch operator display (HMI) Full machine control Buzzer + power-on indicator light Emergency stop buttons (including 1 on the cutting unit side) Technical documentation available

Condition: used, functionality: fully functional, Year of construction: 2020, total length: 950 mm, total height: 1,360 mm, total width: 700 mm, overall weight: 188 kg, feed length X-axis: 297 mm, feed length Y-axis: 210 mm, feed length Z-axis: 200 mm, We are offering this ready-to-use Keyence AGILISTA-3200W. All maintenance has been carried out by Keyence. A full service was recently performed by Keyence, and the printer has been in standby mode since. Redpfey Hmhhsx Ad Ast The printer is in excellent condition. Complete accessory set for immediate operation included: - 1x cartridge of print material - 1x cartridge of support material - 3x waste containers - 1x rinse tank for printed parts - Cleaning kit for parts and printer Viewing by appointment possible. On-site introduction/training available upon request. Technical specifications: - Print material: AR-M2 (transparent print material), AR-H1 (heat-resistant print material), AR-G1L (silicone rubber [low hardness]), AR-G1H (silicone rubber [high hardness]) - Support material: AR-S1 (water-soluble support material) - Build volume: 297 × 210 × 200 mm (DIN A4 size × 200 mm) - Resolution: 635 × 400 dpi - Layer thickness: High resolution AR-M2: 15 µm, standard resolution AR-M2: 20 µm, AR-H1: 20 µm, AR-G1L/H: 30 µm - Interface: Ethernet 10BASE-T / 100BASE-TX - Operation: color touch panel - Dimensions: 95 x 70 x 136 cm - Weight: 188 kg If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, CEROX 1000 Hot Stamping / Thermal Transfer Printing Machine — 1999 Brand: CEROX Model: 1000 Year: 1999 Type: Thermal transfer printing machine Cycle counter: 130,342 cycles Rjdpey Eyicefx Ad Aot Compatible surfaces: Cylindrical, oval, and irregular shapes (ideal for bottles and jars) Controller: Telemecanique Dimensions: 1,900 x 2,500 x 1,870 mm Includes: ✅ Aluminium tooling ✅ Silicone tooling ✅ Consumables and spare parts ✅ Sample engravings Condition: Good Location: Albacete, Spain Available for inspection by appointment VAT invoice available

Condition: used, -Model: NG 144 -Capacity: 90 to 252 baguettes -Trolley dimensions: 600x800 mm -Dimensions (LxWxH): 1500x1560x2200 mm -Year: 2000 -Serial No.: 144NGA035 Rodpfx Adjwxl H He Ajt -High-grade top hanging hook -Power: 2 kW -Heating capacity: 90 kW -Voltage: 400 V -Weight: 1,320 kg -Suitable for baking bread, pastry, and viennoiserie -Burner: C10 gas -Insulated with rock wool panels -Double glazed 8 mm, tempered 'Securit' glass -400 mm stainless steel access ramp Lrey Tdewxl H Hoxugsr -Equipped with steam evacuation valves -Fully stainless steel refractory heat exchanger -2 steam units for optimal distribution over the products -4 heat distribution turbines for improved baking -Front, hood, and extractor made of stainless steel -Stainless steel sheathed heating elements -High-temperature resistant silicone electric wiring harnesses.

Condition: used, Year of construction: 2006, I'm selling a used industrial pressure washer from the Finnish company Aqua Clean in very good condition. The machine has a working space of 140 cm in diameter and a height of 90 cm. It's made of stainless steel. It's also equipped with an oil separator and filter. The washer is insulated. The upper and side lances are driven by a motor with a reducer. The lower lance is driven by a pump pressure of 4 atmospheres. It also has a fume extractor. It has a heating temperature of up to 90 degrees Celsius and an operating timer. The last photo shows the new machine, still in production today in its original form. The manual is in English. The main pump has a silicon carbide seal replaced to withstand the high temperatures and aggressive chemicals. Rsdpfx Adey Hxz Hj Aet

Condition: good (used), functionality: fully functional, Used container facility, dry, leak-proof, uncleaned, various signs of usage. The complete system is for sale. 12x office units, 2x break rooms, 2x toilets/women, 2x toilets/men. - Consists of 8 pieces of 24-foot containers = 284 m² - Cement-bonded floor slab - Ground-level installation possible without issue. Rodpfxjy Hf Dhs Ad Ast Dimensions per container: Length: 7.34 m Width: 2.50 m External height: 2.80 m Internal height: 2.50 m Insulation: Roof: 140 mm Wall: 100 mm Floor: 100 mm Equipment: - 2x entrance doors - Plastic windows with insulated glazing and tilt/turn function - Blinds - Electric heating - Kitchen - 2x WC with washbasin – ladies - 2x WC with washbasin and urinal – men - Sealing gaskets - Wall paneling - Ceiling paneling - Crossover plates - Container clamps - Documentation available The facility is dismantled and prepared for transport. Loading and transport can be arranged. Only serious and reputable inquiries including your name, email address, and telephone number will be answered.

Year of construction: 2021, condition: used, Manufacturer : IMMEQUIP Engineering Model : CEMH-LAM360 Rodpfjy Dvpvex Ad Ajt Year : 2021 Type : Cutter / Laminator Structure & design: All-stainless steel 304L mechanically welded frame Fitted with 4 pivoting wheels with brakes Dimensions Longueur totale : 3550 mm Hauteur tapis entrée : 1025 mm (±15 mm réglable) Hauteur tapis sortie : 737 mm Largeur bandes : 360 mm Conveyor: Inlet conveyor - White silicone NEOBELTING belt - Maximum temperature: 90°C continuous - Speed: 17 m/min - Motor: 0.25 kW – three-phase 400V - Product guidance via stainless steel comb Conveyor system: Exit conveyor - White silicone NEOBELTING belt - Speed: 43 m/min - Motor: 0.37 kW – three-phase 400V - Integrated air blow-off ramp Cutting unit - Cutting wheel Ø350 mm - 3 blade holders (45° and 90°) - 3 ground hardened steel blades (Z30C13 – 40/42 HRC) – additional blades can be fitted - Rotational speed: 72 rpm - Motor: 0.37 kW – three-phase 400V - Stainless steel housing with adjustable pressure roller - Stainless steel roller guide - Cutting kit available: 90° and 45° Product orientation kit: 2 symmetrical sets, each comprising 1 cell, 1 stop flap and 1 pneumatic cylinder Rolling function - Non-motorised hollow stainless steel roller, Ø140 x 350 mm - Gap adjustment: manual - Adjustable anti-clogging scraper Power supply: Three-phase 400V – 50 Hz Danfoss VLT frequency converters Operator display (HMI) Full machine control Buzzer + power-on indicator light Emergency stop buttons (including 1 on the cutting unit side) Electrical documentation available

Condition: like new (used), functionality: fully functional, Year of construction: 2023, operating hours: 100 h, Demo unit for sale, not used in production. APEX3R (83 x 168 Inch or 2108 x 4267mm) APEX3R includes Phenolic Table Top, Work Area (2108 x 4267mm), Single Piece All Welded Tube Frame, Stress Relieved and Milled axis Datums, All axis Servo Drive system, X&Y axis Planetary Gear box, Helical Racks & Pinions on X & Y Axis, Z axis Ball Screw, Repeatability +/-0.025mm, Max Slew Rate 70m/min Phenolic Vacuum Grided Table Top, Pop Up Pin Ready; Right Front Pins 3-306-R16; Right Front Pins Locator Pins; Front Right Location 4 Zone High Pressure Manual Ball Valve Vacuum Table Plumbing Units in Millimeters Controller Display Main Electrical Enclosure Kit; Apex3R 380V 3P CE MACHINE VOLTAGE 380V/415V 3PHASE CE Standard Grid Vacuum table 30mm block grid using 6mm gasket tape CE Safety Machine Configuration 300 Standard WidthGantry; 6 inch clearance ATC Spindle: 10 HP (7.S kW) HSD HSK63 (ER40/ 240O0 rpm) 380V 3PH CE Fan Cooled Spindle: Max Shaft Size 1 inch (25-26mm) Pneumatic Controlled Dust Boot Linear Spindle Tool Changer System - Single Row 11 Position HSK63 Tool Holder Kit HSK63 QTY 3 - Includes metric collets in various sizes Techniks HSK63 Stand & ER40 Torque wrench Kit Spindle Only Z Carriage; No Knife Kit Surface Probe and Auto Calibration Sensor Apex3R Operator Hands Free material surfacing setup Auto Misting / Lubricating System for ATC spindles Design Designed for ATC spindle machines. Includes both rigid copper and flexiable Loc Line nozzles. Rsdpfx Aoy Hpkxod Ast Maglube Misting Fluid (1 gallon) Seed based lubricant that works well for Non Ferrious material cutting. Evaporates quickly after initial wipe off. Single Zone Safety Light Curtain Kit Individual Mirror Beam Bender Stanchion Cross Hair Laser Pointer Allows operator to easily set 0,0 location on material to start job using visual red crosshairs Operations Roller Workstation with All in One 24" PC Includes Keypad Stand, Maintenance Override Switch & CE Safety Reset Butto

Condition: used, mileage: 1,147 km, power: 75 kW (101.97 HP), first registration: 10/2024, fuel type: diesel, empty load weight: 1,715 kg, maximum load weight: 585 kg, overall weight: 2,300 kg, wheelbase: 297 mm, next inspection (TÜV): 10/2026, CO₂ emissions: 140 g/km, fuel consumption (urban): 6.9 l/100km, fuel consumption (extra-urban): 4.8 l/100km, fuel consumption (combined): 5.6 l/100km, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, second-hand vehicle warranty, soot filter, traction control, "Composition Audio" radio with color touch display and USB interface (Type C), digital radio reception (DAB), air conditioning, Lane Keeping Assist "Lane Assist", cruise control (GRA), Bluetooth hands-free preparation, mobile phone connectivity via Bluetooth, digital radio reception (DAB+), rear parking aid, multifunction steering wheel, digital cockpit, multicolor with selectable information profiles, 6-speed manual transmission, acoustic package, comfort package, technology package, occupant protection technology package, driver and passenger airbags with passenger airbag deactivation, distraction and fatigue detection, automatic headlight control with daytime running lights, fatigue detection, multifunction camera, emergency braking assistant "Front Assist" with pedestrian and cyclist detection, eCall emergency call system, tire pressure monitoring indicator, electronic power steering (Servotronic), sun visors with mirror, airbag label on passenger sun visor, traffic sign recognition, Radio Composition with 10" color touch display, USB interface, USB type-C data port(s) with increased charging power, prepared for online services, electrically adjustable/heatable exterior mirrors, height-adjustable driver's seat, cab seats: driver's seat with armrest, start-stop system with brake energy recovery, central locking with remote control, 12-volt socket in luggage compartment, armrest for driver's seat, electric windows, ABS & immobilizer, fabric seat covers in "Double Grid" design, steel wheels / steel rims, diesel particulate filter, truck registration, full service history, electronic immobilizer, prepared for VW Connect and VW Connect Plus, all-season tires, auto-dimming interior mirror, new general/technical inspection, full service history, CADDY Cargo MAXI EU new vehicle (BeNeLux) with day registration (D) and new refrigeration conversion! Rear doors without window cutouts ... Fresh service up to 0°C. Robust insulated interior construction with smooth surface (HACCP), almost no silicone joints, stainless steel loading edges, non-slip floor." Rodpfx Adjuyy D Is Ast

Year of construction: 2025, condition: new, Demo machine Year of manufacture: 2025 Travel range: 2500x1300x200mm Machine frame in 19mm Forescolour, consisting of milling table (X-axis), gantry (Y-axis), Z-axis unit in compact board, and base frame with adjustable machine feet. Milling bed as sacrificial board in 19mm MDF. Table openings longitudinally and transversely pre-configured. Mechanical set consisting of profile rails including profile rail carriages, ball screw and precision rack gears. All components assembled, pre-lubricated including test run, immediately ready for operation. Control set consisting of control cables, energy chains, planetary gears, stepper motors, high-performance drivers, power supply and toroidal transformer, all preinstalled in the control cabinet, as well as sensors for each axis. Control relay for automatic actuation of the existing extraction system. Brush seals for dust protection and protective equipment compliant with CE regulations: includes moving extraction unit and one-sided mounted laser scanner for work area monitoring, with 275° and 5.5m field range. (Machine positioned in a room corner) Manual control panel equipped with all necessary machine functions, including emergency stop and dead man’s switch. Tool length sensor for determining tool length and active offset of the reference point. High-frequency spindle with 2.2 kW, incl. clamping nut, frequency inverter, power filter, breaking resistor, and collet set. Built-in monitor, incl. mini PC with Windows 11, control software Beamicon2, mouse and keyboard, pre-installed in an ergonomic console. CAD license Rhino 8.0 and CAM license Estlcam V12, as well as all necessary documentation, will be sent by email prior to delivery. Includes milling bed designed as a vacuum table, consisting of four individually controllable segments. Cross table made of PE with top layer in MDF. Becker vacuum pump with a capacity of 100m³/h, oil-lubricated. A 16 Amp, 400 V AC plug is required for the vacuum pump electrical connection. The customer must provide HDF 3mm raw on both sides for the whole vacuum table (2500x1300mm) as a sacrificial board. (Recommended application: machining of coated wood-based panels) Includes 10-piece tool set consisting of: 3 pcs. 5 mm Z2 (HF52REVHM) 6 pcs. 4 mm Z1 (HF41REVHM) 1 pc. 5mm Z3 (HF53SRECAR) (Tool selection can be adapted as needed) Includes maintenance package in systainer: - 150 ml grease gun - 400 g cartridge high-performance grease - 500 ml can of silicone spray grease - Grease nipple incl. hose and 30mm face mill with indexable inserts Rjdexc Rmqjpfx Ad Ast Availability: short notice Location: Flörsheim

Condition: excellent (used), operating hours: 100 h, PERFECT CONDITION, purchased in December 2016 Used for about 100h New price is 46808 EURO The MKF series environmental simulation chamber from BINDER is ideal for all cold and heat tests, carried out on the basis of recognized temperature and climate test standards in accordance with DIN and IEC. High operating comfort and extensive standard equipment have obvious advantages in everyday use. Key features Temperature range: -40 °C to 180 °C Humidity range: from 10 to 98% relative humidity Integrated 20 L water tank 4 potential-free relay contacts e™ preheating chamber technology Programmable condensation protection for samples Heated viewing window with internal LED lighting Humidity control with capacitive humidity sensor and steam humidification Rsdpfxevldnqj Ad Ajt BINDER Multi Management Software APT-COM™ 4 Basic Edition Diagnostics system with optical and acoustic alarm Intuitive touchscreen controller with time interval programming and real-time programming Internal data logger, measured values in open format can be read via USB 2 access ports with 80 mm silicone plug, left and right Independent, adjustable temperature protection class 2 (DIN 12880) with optical alarm 4 castors, two with brakes 230 V socket on the side panel on the right Ramp function can be set Integrated line recorder Time clock actual Door heating Alarm message in the event of lack of water in the fresh water tank 1 stainless steel wire shelf Protection against leaking hoses, covering the water supply and discharge pipes up to a height of 1 m Stainless steel interior Halogen-free refrigerant R-404A Cooling provided by a compressor unit

Condition: used, Year of construction: 2013, machine/vehicle number: CA47, Used capsuling equipment Nortan Prisma 4T 6000 bph This used capsuling equipment was rebuilt in 2013 as a new, and shrink-wrap capsule type. Redovguvzspfx Ad Ajt Safeguards are available for this Used rotary capsuling machine There are three different sets of bottle equipment available. The machine has been checked before dismantling. It is in good working condition and has been in operation until September 2021. It has automatic storage for the shrink capsules. A photocell connects the components to the main structure, which releases capsules for incoming bottles, completely automatically and synchronized. Despite its simplicity, maintenance is very important for this capsuling machine. The thermal heads and their gaskets, need to be checked carefully. The electrical panel is in order and complete with all cables and PLC, manuals, and wiring diagrams. The floor space required for this used capsuling machine square meters 4,50. Max. speed is 6,000 b\h. The Used rotary capsuling machine, has a whole set of stars, augers, and counter-stars to convey the bottle correctly. The direction of entry is from left to right and therefore clockwise. This machine is specific for glass containers. It can handle formats ranging from 0.50 L, to 0.75 L up to the size of 1 L. Nortan is one of the most common brands in circulation, it is therefore easy to find any spare parts for the machine.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 24 months, total width: 700 mm, total length: 660 mm, total height: 1,670 mm, empty load weight: 110 kg, Dough divider for traditional artisan products for exceptional bread / pastry quality " The original " Robust dough divider for flexible use Rsdpfx Ajgtx Nljd Aet Press plate, cutting and punching grid can be easily exchanged Manual dividing and shaping of the dough Strengthened construction Ergonomic division from direct processing to long-term management Pull-out holder for the dough tray The device is space-saving and 4 inserts can be stored no power connection required, maintenance-free As standard with: 1 punched grid, 1 dough pan, 2 silicone pads Visit our large bakery machine park!

Condition: used, Year of construction: 2006, operating hours: 8,100 h, Wheel Loader Ahlmann AL80 Year of manufacture: 2006 Hours: 8100 4-cylinder Deutz engine Hydraulic quick coupler Tyres approx. 40% good Heating 1 x bucket 1 x fork Redpfjy Dzbwsx Ad Aet Service carried out at 8038 hours! UVV safety inspection new on request! Cylinder head gasket replaced in 04/2026! Timing belt replaced on 20.01.2019 at 5736 hours! Original paint! German machine! Excellent condition! You can view and test the machine at any time after prior telephone arrangement. If you have any questions, just call. Transport is no problem. All information subject to change. Errors and prior sale reserved.

Year of construction: 2010, condition: excellent (used), Used four-head welding machine, year of manufacture 2010, running direction from left to right, maximum welding size = 3,500 x 3,000 mm, gasket presser, WINDOWS control, incl. safety fence and cooling & transport table. Rjdpfey Dtbcox Ad Aet

Condition: new, axle configuration: 3 axles, loading space length: 8,880 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, loading space volume: 476 m³, total width: 2,550 mm, total height: 2,165 mm, Year of construction: 2026, Equipment: * Chassis material: aluminium * Chassis type: V-chassis * King pin load National (t): 12 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1175 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 080 * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 8880 * KC-Value: 0400 * Overall width (mm): 2550 * Volume (m³): 47.5824 * Wheelbase (mm) (WB): 5800 * Overall length (mm): 10259 * Chassis * Axles, brakes and suspension * SAF axles * Offset (ET): 120 * Option: 1st axle with lift axle and traction assist * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator * Return-to-ride (RTR) 15 km/h * ECAS air suspension with lift and lower valve * Automatic lowering of air suspension during tipping, manually lockable via Smartboard and chassis switch * Pneumatic coupling head: European palm coupling * Control console: EBS operation on driver's side before the axles * Standard Smartboard * Air and electrical console, passenger side * Landing gears: Weweler steel gear landing gears, type Weweler, with compensating feet, one-sided operation, and 2-speed function * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco Trailerpulse * Rims: Alcoa Dura Bright * Tyre type: Regional application * TPMS sensor type: rim-mounted sensor * TPMS sensor included * Chrome wheel nut covers with STAS logo * Working lamp position (operated by switch): 2 LED reversing lights at the rear, left and right, mounted on the lamp bar * Working lamp position (operated by switch): 2 LED reversing lights at the front, left and right, mounted near the landing legs * LEDs in door end cross member: 2 x 3-function LED * Underrun protection: manual operation * Tow hooks: 2 pcs left and right * Mud flaps underrun protection: black with STAS logo * Cylinder tipping angle, normal: ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 6480 * Max. tipping cylinder pressure: 250 * Cylinder stage surface treatment: standard finish * Hydraulic coupling: rotary coupling * Hydraulic coupling size: 1 Rodpfxoy Dmvaj Ad Ast * Hydraulic coupling gender: female * Hydraulic coupling hose: 2,500 mm * Mudguard type: Domar STAS with white stripe * Number of mud flaps on mudguard: 2 pcs * Mudguard mud flap type: asphalt * Toolbox: 860x520x500 * Aluminium ladder 3 m - passenger side * Broom and shovel holder * Ferry lashing rings * 2 lashing rings at the rear of the chassis * Two plastic wheel chocks * Retention device chassis to body: rubber buffer Body: * Front wall tilt (°): 20 * Rear wall tilt (°): 90 * Inner lower belt profile tilt (°): 45 * Front wall: 4 mm (aluminium) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm aluminium - 110 Brinell * Rubber pads installed under floor crossmembers * Rear wall type: combination door * Combination door type: 2/3 - 1/3 with swiveling door cross member * Door leaf opening: right leaf opens first * Swiveling door end cross member * Hinge type: double door hinge * Slide gate: rectangular design * Slide gate position: 1 piece, centred * Grain outlet / dust bag: 1 grain funnel incl. dust bag * Smooth rear wall surface * Fastening of opened door leaves secured by chain * Rear wall gasket with standard rubber seal * Extra aluminium round profile

Condition: new, Year of construction: 2026, functionality: fully functional, Performance Data: Diamond Grinding Spindle: HSK-50 or customer-specific (e.g., SK-40, Perfect Arbor, etc.) Max. Dressing Wheel Diameter: ø300 mm Max. Dressing Wheel Width: 20 mm Max. Grinding Wheel Diameter: up to ø250 mm Grinding Wheel Speed: 0–1,500 rpm (infinitely variable) Travel Range (Left/Right): 135 mm Travel Range (Forward/Back): 135 mm Dressing Wheel Diameter (Silicon Carbide): ø180 x 10 x ø32 mm Swivel Range: approx. 98 degrees on both sides Dressing Wheel Speed: 0–2,800 rpm (infinitely variable) Dressing Wheel Oscillation Frequency: 0–50 strokes/min (infinitely variable) Dressing Wheel Oscillation Length: 0–50 mm (adjustable) X, Y Axis Optical Scale Resolution: 0.001 mm Capabilities: Dressing of radii and wheel stacks (multi-wheel packs) Power Supply: 380V, 50Hz; Total Power: approx. 1.5 kW Rodpfx Adeha Eh Ho Aet DXF Import: Included Camera System: Included (with live transmission via 23" monitor) Software: Latest generation GWDress-Studio with automatic AI measurement included

Condition: new, Year of construction: 2026, functionality: fully functional, The GWDress-250 smartline is the intelligent solution for the precise dressing of grinding wheels up to Ø 250 mm. Thanks to selectable manual or automatic control, dressing processes can be designed with maximum flexibility and efficiency. Performance Data: Rotary axis & feed axis CNC controlled Diamond Grinding Spindle: HSK-50 or customer-specific (e.g., SK-40, Perfect Arbor, etc.) Max. Dressing Wheel Diameter: ø300 mm Max. Dressing Wheel Width: 20 mm Max. Grinding Wheel Diameter: up to ø250 mm Grinding Wheel Speed: 0–1,500 rpm (infinitely variable) Travel Range (Left/Right): 135 mm Travel Range (Forward/Back): 135 mm Dressing Wheel Diameter (Silicon Carbide): ø180 x 10 x ø32 mm Swivel Range: approx. 98 degrees on both sides Dressing Wheel Speed: 0–2,800 rpm (infinitely variable) Dressing Wheel Oscillation Frequency: 0–50 strokes/min (infinitely variable) Dressing Wheel Oscillation Length: 0–50 mm (adjustable) Rodpew E E S Ajfx Ad Aet X, Y Axis Optical Scale Resolution: 0.001 mm Capabilities: Dressing of radii and wheel stacks (multi-wheel packs) Power Supply: 380V, 50Hz; Total Power: approx. 1.5 kW DXF Import: Included Camera System: Included (with live transmission via 23" monitor) Software: Latest generation GWDress-Studio with automatic AI measurement included Country of Origin: Austria

Condition: new, functionality: fully functional, Year of construction: 2026, The FM230 extractor is characterized by small dimensions and at the same time high efficiency of up to 1000 m3/h. Standardly equipped with a metal rotor and a running base. Great value for money, which makes it an uncompromising device in its category. Many years of effort by our team resulted in the creation of a multi-patch metal impeller of the WhirlWind series, which, together with the massive metal casing, constitutes the heart of the extraction system. The vacuum air draft perfectly sucks excess sawdust generated during mechanical processing of wood, produced during machine operation. The massive construction of the extraction unit has been enriched with additional supports in the base to ensure stable and vibration-free operation of the device. The entire structure has been reinforced with appropriately thick supports that keep the chute cylinders and the weight of waste bags in the right position on a massive base. An additional advantage is the use of a flexible and durable gasket placed in a critical place to improve the tightness of the entire system. As standard, we equip the extractors with canvas bags (filter and waste) and additional disposable, durable plastic waste bags. Flexible metal bands ensure long-term trouble-free operation of bag replacement. The use of swivel and ball-bearing wheels ensures efficient movement of the extractor around the facility. Machine characteristics The perfect machine for both professionals and amateur carpenters. Optimum extraction performance works perfectly with machines such as: Planers Planers Redpfevu Az Ujx Ad Aot Thickness planers Milling machines Technical data ENGINE POWER 0.75 kW SUCTION PERFORMANCE 1000 m3/h VOLUME OF BAGS 60L NUMBER OF BAGS 2 DIAMETER OF SUCTION PIPE 100mm HEIGHT 1500mm WIDTH 420mm LENGTH 600mm VOLTAGE/FREQUENCY 230V WEIGHT 27kg

Condition: new, Year of construction: 2026, functionality: fully functional, New, FM230-L1 low-noise vacuum extractor. Large design and powerful vacuum allows for removing sawdust and chips from machines and floors. Machine features Extractor with a powerful vacuum (horizontal system rotor) Metal, balanced rotor Strengthened motor Workplace vacuuming capability Large bags capacity Wide suction nozzle in the set Portable due to large wheels Ergonomic handle for machine manoeuvring Quiet work, high efficiency Due to its small size it doesn't take a lot of space in the workshop Many years of our team's effort resulted in creating a WhirlWind series multi-wing metal rotor, which, along with the rigid metal body, constitutes the heart of the extractor. Vacuum air-flow perfectly sucks out excess amount of sawdust produced during machining wood. Large design of the extractor is equipped with a solid frame providing stability and vibration-free operation. Entire construction is also strengthened with appropriately thick supports, which hold the cylinders along with the weight of the waste bags in proper position. Another advantage is the usage of an elastic and durable gasket, located in the integral part of the machine in order to improve the tightness of the entire system. By default, our extractors are equipped with burlap (filtering and waste) as well as additional, disposable, durable, plastic waste bags. Elastic metal bands ensure long-term reliable bags replacement. Usage of rotary wheels in bearings provides quick relocation of the machine. Technical data S1 continuous work motor power 0.75 kW Speed 2800 rpm Suction efficiency 1150 m3/h Bags capacity 90 L Number of bags 2 Extracting connector diameter 100 mm Redpjvu A Eaefx Ad Ast Height 1550 mm Width 420 mm Length 800 mm Voltage 230V Weight 27 kg