Used Solder Fume Extraction for sale (4,840)

Condition: as good as new (ex-display), machine/vehicle number: 20170140, TEKA AirTracker Basic - Room Monitoring System Professional room monitoring system that measures particulate matter, temperature, humidity, and noise levels. More than just a dust measurement system! Certified measurement sensors High-visibility LED display for dust levels Individual configuration of dust thresholds Dedicated TEKA Connect Wi-Fi AirTracker Control of fans or filter systems from the TEKA series Display and analysis of measurement data Display and readout of measurement data Trend display for evaluation / data logger Readout of data via web interface Wall-mounted, ceiling-mounted, and floor-standing units. One device – many possibilities! Built-in high-performance PC of the latest generation (MX6 with 2 cores) Wi-Fi control/UART The innovative, intelligent room monitoring system of the future. The European division of the World Health Organization (WHO) has urged the EU to impose stricter air quality standards. The innovative, intelligent solution from TEKA: AirTracker indoor air monitoring is used. Lasdpfxjv Taq Re Amzeh The newly developed sensor in the TEKA AirTracker series detects particles smaller than 100 nanometers and impresses with its evaluation from 0 to 30 mg/m³ with an accuracy of ± 0.1 mg/m³, documented and with a test certificate. Creating trust. High-tech sensors guarantee reliable measurement values and safety. Individual settings of the threshold/limit values set the course for a secure future. As soon as the configured threshold is reached, the sensor indicates the current status of the particulate matter concentration via two highly visible, large LED strips with a traffic light function. The optionally available AirController can be used to control fans or filter systems from the TEKA series, depending on the particulate matter load. Ready-to-Go: Industry 4.0 – TEKA AirTracker. Companies can document compliance with employers' liability insurance regulations, manually or using the data logger (optional), in advance of BG inspections. Always keep an eye on prevention and employee health – building trust. Dust, whether coarse or fine – up to nanoparticles, particulate matter categories PM2.5 for A dust or PM10 for E dust – the TEKA AirTracker, with its newly developed sensor, monitors particulate matter within a radius of over 30 meters with an accuracy of +/- 0.1 micrometers and certifies this – feel safe. The TEKA AirTracker comes standard with other innovative sensors. It also measures air temperature, humidity, and sound levels. Networked sensors/actuators are the future of Industry 4.0. TEKA is already embracing this networked technology. TEKA sensors/actuators are already an integral part of industry. With a suitable smartphone, tablet, or PC, you can download the TEKA AirTracker app, which displays the current room temperature, humidity, particulate matter levels, and noise levels in the ambient air. Various setting and function options in the app round out its user-friendliness and functionality. There are many "dust sensors" available. However, quality and safety can only be achieved through the networking of certified sensors that document the measurement data.

Condition: used, Ex-protected filter unit, extraction system, central extraction cartridge - impulse filter P. RIES GmbH Type 330 D ATEX Cartridge filter system, rectangular filter unit, central welding fume extraction Machine no. 10011932 Year of manufacture: 2020 - as new, unused Airflow rate: 3,300 m³/h Airflow rate: 0.9 m³/sec Lasdpfx Aey N Duqsmzeh Filter area: 20 m² (1 piece cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Exhaust connection at filter outlet: sound insulation hood Compressed air connection: approx. 8 bar Motor power: 3 kW Mains connection: 400 Volt, 50 Hz - Explosion-protected design ATEX II 2Db 125°C / 3G T4 - Pneumatic rotating filter cleaning, manual via push button - Manometer for differential pressure display (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm P-RIES, type cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (sound insulation hood) equipped with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Built-in radial fan, type IE 3-premium efficiency, 12% improved efficiency - Robust steel construction in RAL 7035 light grey, antistatic powder-coated - Dirt collection container as pull-out drawer approx. 70 litres (440 x 530 x 300 mm) - EC Declaration of Conformity, operating instructions with wiring diagram available Required space (L x W x H): 670 x 700 x 2430 mm Weight extraction unit: 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg As new, unused, ex stock

Condition: used, We are offering a welding fume extraction unit from the brand Euromate. Please contact us for a quote. Ljdjxz R Aiopfx Amzoah

Year of construction: 2015, condition: used, A central welding fume extraction system is offered. Airflow: 30000m³/h, airflow: 30000m³/h, motor power: 30kW, compressed air connection: 6-8bar, max. static pressure: 2500Pa, duty cycle: 100%, control: PLC. The system is equipped with 2 spark traps and various ductwork components (extraction arms and hoods not included). An inspection is possible by arrangement. Lodpfxszy Rvts Amzsah

Condition: as good as new (ex-display), Year of construction: 2026, SRF Maxi. (Image on the right) 3 m extraction arm Application area Medium amounts of smoke/dust Regular use Benefits Low need for repositioning the extraction hood Contamination-free filter change Lodsdqzcvspfx Amzjah Safe operation thanks to rotary field detection High cost-effectiveness due to long filter service life Features Safe operation through filter monitoring Extraction hood can be rotated and swiveled 360 degrees Start/stop automatic (optional) Workplace lighting (optional) Technical data Process: 2-stage Filter type: Disposable filter Filter area: approx. 20 m² Separation rate: > 99% Filter material: Polyester fleece Welding fume separation class: W3 Additional filters: Pre-filter (aluminum mesh) Basic data Extraction capacity: max. 1,100 m³/h Diameter of extraction arm: Ø 150 mm Length of extraction arm: 3 m Diameter of suction connection: Ø 150 mm Power connection: 3 x 400 V / 50 Hz Motor power: 1.1 kW Sound pressure level: 70 dB(A) Dimensions (W x D x H): 790 x 815 x 1080 mm Weight: approx. 71 kg / approx. 120 kg

Condition: good (used), Year of construction: 2019, functionality: fully functional, volume flow: 8.64 m³/h, filter area: 120 m², suction capacity: 12,000 m³/h, Equipment: type plate available, Extraction capacity: 6,000–8,640 m³/h Max. fan capacity: 12,000 m³/h Total filter surface: 120 m² Number of filter elements: 12 Operating hours: 2.045 Featured with: - Central welding fume extraction and filtration system - Filter material ePTFE membrane - Automatic compressed-air filter cleaning - W3 Welding fume class Lsdpfx Amjz Tdfyozeah - Touchscreen control - Additional extraction point Country of origin: Germany Motor power: 7.5 kW Machine (L×W×H): 370 × 190 × 280 cm Machine weight: 1.220 kg

Condition: used, Year of construction: 2015, type of input current: three-phase, input voltage: 400 V, filter area: 286 m², suction capacity: 6,000 m³/h, input frequency: 50 Hz, Equipment: type plate available, Dust extraction unit, fume extraction unit for welding, self-cleaning cartridge filter, pneumatic, vacuum-based, suitable for plasma cutting, laser cutting, sandblasting, soda blasting, shot blasting, and for all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, resulting in high device efficiency. The fan is located on the clean air side, minimizing the risk of explosion. Brand: Donaldson Torit DCE Model: DFPRO 16-R Year of manufacture: 2015 Laodpfx Ajz Trrhemzsh Unit in the "R" version – reinforced construction with additional grounding. Built-in explosion relief flap. Delayed dust discharge valve, EX ATEX certified. Filtration area: 286 m2 Fan power: 7.5 kW Capacity: 6000 m3/h New filter cartridges installed in the unit. Stock number: 1029

Condition: good (used), suction capacity: 3,300 m³/h, negative pressure: 2,000 Pa, Dust extraction, welding fume extractor, self-cleaning filter, cartridge filter for plasma, laser, sandblasting, shotblasting The filter is cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Fan on the clean side, which reduces the risk of explosion to a minimum. Brand: DUST HOG / UAS Model: SBS-4-2 SD Engine power 4 Kw Fan in sound-absorbing housing Capacity 3300 m3/h Vacuum - 2000 Pa Filtration area - 112m2 Inlet diameter - 300 mm Cartridge filter cartridges - 4 pieces. Height - 3.90 m depth - 1.70m Ledsunh Uvjpfx Amzsah width - 1.25m

Condition: used, Year of construction: 2011, filter area: 418 m², suction capacity: 14,000 m³/h, negative pressure: 3,600 Pa, Dust extraction, welding fume extraction, self-cleaning, pneumatic, vacuum cartridge filter for plasma, laser, sandblasting, soda blasting, shot blasting and all types of dry dust. Brand: VALCO Model: PPX-18-W3 Thanks to the W3 approval, the filter in this version can be used when welding high-alloy steels. The filter is cleaned with compressed air pulses during operation, which ensures high efficiency of the device. The fan is on the clean side, which reduces the risk of explosion to a minimum. Parameters : Efficiency - 14000 m3/h Negative pressure - 3600 Pa Filtration area - 418 m2 Cartridge filter inserts - 18 pieces Fan - 15 Kw Lasdpfowiuaqjx Amzeh Inlet diameter - 450 mm total length - 2.80 m total width - 1.35 m height - 4.00 m Device from 2011 Full technical documentation available. There are 2 pieces of this device available. Stock no.: 0986 1/2

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, overall weight: 875 kg, volume flow: 2,750 m³/h, Donaldson dry extraction unit for sale Capacity: Q 2.750 m³/h 5,5 KW further technical data see pictures Lajdpfeulgl Iex Amzeh Condition very good. Can be viewed at any time

Condition: used, functionality: fully functional, type of input current: three-phase, filter area: 150 m², suction capacity: 9,000 m³/h, Dust extraction, welding fume extraction, self-cleaning cartridge filter, pneumatic and vacuum-operated, suitable for plasma cutting, laser, sandblasting, soda blasting, shot blasting, and all types of dry dust. Lasdjy H Hkvopfx Amzsh The filter is cleaned pneumatically by compressed air pulses during operation, ensuring high device efficiency. The fan is located on the clean air side, which reduces explosion risk to a minimum. Brand: Plymovent / Euromate Model: SCS Cartridge filter elements – 2 pcs Filtration area: 150 m² Fan enclosed in a soundproof casing with noise silencer, power 7.5 kW. Fan model: CHB16LG03 Capacity up to 9,000 m³/h Inlet diameter: 400 mm Filtration efficiency: 99.8%

Condition: good (used), Year of construction: 1997, machine/vehicle number: 0001, Offer 24587 Technical data: - Electrostatic filter with control light - Exhausted and cleaned air is recirculated to the work area Lajdpfxewn Egre Amzjh - Wall-mounted version with two jointed extraction arms - Jointed arm length approx. 9000 mm - Air volume flow approx. 4700 m³/h - Active filter surface 9.2 m² - Drive - Fan 400 V / 0.75 kW - Space requirement approx. W 700 x H 1600 x D 550 mm - Weight approx. 120 kg

Condition: used, Year of construction: 2012, type of input current: three-phase, filter area: 62 m², suction capacity: 2,500 m³/h, negative pressure: 9,000 Pa, Dust extractor, welding fume extractor, self-cleaning pneumatic filter, vacuum dust collector, absorber for plasma, laser, sandblasting, and all types of dry dust. The filter is pneumatically cleaned with compressed air pulses during operation, resulting in high device efficiency. Large filtration area requiring minimal space. High mechanical stability of the filter material ensures long service life. Compared to conventional rigid filters, it causes minimal pressure loss. Lsdpfx Ajxrpmzomzeah Short bursts of compressed air during the filtration process provide effective filter cleaning. Fan power: 7.5 kW Capacity: 2,500 m³/h at a pressure of up to 9,000 Pa Filter cartridges: 11 pcs Filtration surface: 62 m² The device is equipped with an automatic system for impregnating cartridge filters. The extractor is designed for special applications where the filtered fumes and dust may be moist and sticky. Adding impregnating agent captures moisture from the fume, protecting the filters from clogging. In this case, the lifespan of the cartridge filters is increased. Stock number: 0981

Condition: like new (used), Year of construction: 2014, type of input current: three-phase, total width: 1,200 mm, total length: 1,600 mm, total height: 3,850 mm, filter area: 120 m², suction capacity: 7,200 m³/h, Dust extraction unit, fume extraction unit, self-cleaning filter from the renowned NEDERMAN brand. The FilterMax DX, designed by Nederman, is a modular filtration system capable of serving extraction points throughout the entire production hall. The FilterMax DX is designed to operate with dry dust that may pose an explosion hazard. The unit is equipped with a reinforced, double-grounded housing with a panel designed to withstand extreme loads that occur during an explosion. The unit is like new – it has never been used (stock surplus). Brand: Nederman Model: FilterMax DX 6000 TR Year of manufacture: 2014 Designation: EX II 1/3 D T=125°C Capacity: 7200 m3/h Filtration area: 120 m2 Laodpozf Hn Ajfx Amzoh Filter cartridges: 12 pcs Fan power: 11 kW Inlet diameter: 300 mm ATEX panel to relieve explosion pressure ATEX check valve Unit dimensions: Width: 1.20 m x 1.60 m Height: 3.85 m Base: 1.10 m x 1.40 m Stock number: 0008

Condition: used, Year of construction: 2022, Technical data: Process: 2-stage Filter surface area: approx. 17 m² Separation efficiency: >99% Welding fume separation class: W3 Extraction capacity: 1100 m³/h Extraction arm diameter: 150 mm Extraction arm length: 3 m Power supply: 3 x 400 V Motor power: 1.1 kW Sound pressure level: 70 dB(A) Dimensions (approx.): 785 x 730 x 950 mm Weight (approx.): 106 kg Features: - Made in Germany - Suitable for low to medium amounts of smoke/dust - Suitable for occasional to frequent use - Convenient filter replacement via service door - Extraction hood rotatable and pivotable by 360 degrees Equipment: - 3 new replacement main filters (approx. €330 each, new) - 7 new replacement pre-filters - 2 extraction hoods (one unused) Lsdpfxjxbflrs Amzeah

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Lajdoxf Up Iepfx Amzsh

Condition: used, suction capacity: 1,600 m³/h, negative pressure: 2,800 Pa, Mobile station welding fume extractor, dust extractor , filter ESTA SRF K-15 FM Fan of 2.2 Kw (three-phase) located on the clean side Laodpfx Astpui Iemzsh Extraction arm with a range of 3 m Capacity 1600 m3/h Vacuum pressure 2800 Pa Possibility to connect a second extraction arm( inlet 2 x 140mm) SRF K series is designed for extraction and filtration of welding fumes and light grinding dust. It is an excellent solution to the problem of welding fumes and other dust contaminants. Welding or soldering fumes are filtered with a filtration efficiency of 99.9%. The high airflow rate can even pull out large clouds of smoke. Automatic filter cleaning manually activated - after finishing work, connect the compressed air line to the device and manually start the filter cleaning procedure. The filter cartridge is automatically cleaned by pulses of compressed air through a rotary nozzle, which significantly extends the life of the cartridge. During welding, the device does not need to be connected to the compressed air network and thus remains mobile.

Condition: used, Welding fume filter, welding fume extraction, flexible extraction arm -Manufacturer: MIG O MAT, welding fume extraction Laodpfx Amsk Aubqozsh -Extraction fan: Motor Elmot 1.1 kW -Extraction arm: length 5700 mm -Tube: Ø 160 mm / inner Ø 145 mm, see photos -Transport dimension: 2900/100/H470 mm -Weight: 165.5 kg

Condition: new, Year of construction: 2026, The CORMAK ODL4K extraction and filtration system is a modern solution that ensures safe working conditions for operators and effective protection of laser system components against contamination and damage. Filtration at a level of 99.9% removes harmful particles and fumes, guaranteeing clean air in the workplace. ODL4K stands out with an automatic filter cleaning system, an efficient fan, and a compact, solid design that allows for easy integration with various cutting systems. An additional advantage is the ergonomic waste drawer, which allows for quick and convenient emptying of collected waste. The modern ODL4K extraction system ensures effective filtration of contaminants and protection of the most important components of the laser system. ODL4K combines automatic filter cleaning with compressed air, an efficient fan generating high negative pressure and filtration at a level of 99.9% for particles of 0.3 μm thanks to the use of appropriate filters. The system is equipped with an ergonomic dirt drawer, which allows for quick and convenient removal of accumulated dust without the need for disassembly. Additionally, thanks to the modular design, it is possible to mount extraction nozzles on both the left and right side of the device, which allows for flexible adjustment of the installation to the layout of the production hall. ODL4K is a compact, efficient and reliable solution for any laser cutting system - increasing safety, comfort and work efficiency. The main functions of the exhaust gas extraction and filtration system in the laser processing process are: Removal and neutralization of laser smoke. Ensuring work safety at the laser station and in its immediate vicinity. Extending the service life of laser systems by keeping them clean and protecting important components from contamination. The most important advantages of the CORMAK ODL4K extraction system: The extraction system has automatic filter cleaning using compressed air. Under the influence of pressure, the filter is "shaken off", which effectively cleans the filter cartridge and thus extends its service life. Thanks to this, the system maintains its efficiency for a longer period of time. The filter element used in the system is imported and made of high-quality material. The Nano-type fire-resistant filter has high filtration efficiency, retaining particles of 0.3 μm in more than 99.9%. The large dust collection drawer allows convenient collection and cleaning of dust, which makes the system easy to maintain. The motors used in the system are equipped with overload protection, thus ensuring a high level of protection and trouble-free operation. The specially developed high-performance fan wheel generates a large negative pressure, which allows effective removal of laser exhaust gas and ensures high airflow efficiency. The total purification efficiency of the system is 0.3 μm, and the efficiency is more than 99.9%, which shows the high efficiency of the exhaust in removing harmful particles from the air. In addition, it is characterized by a compact structure, which makes it easy to operate and maintain. Technical parameters: Number of filter cartridges 4 Air flow 4000 m³/h Air pressure 3000 Pa Filtration efficiency 99.99% Filter size 350x660 mm Fan power 5.5 kW Inlet diameter 250 mm Weight 420 kg Lajdpfx Amowcdrvszjh Dimensions (L x W x H) 1050 x 1400 x 2250 mm

Condition: used, Year of construction: 2008, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 100 m², suction capacity: 7,500 m³/h, negative pressure: 3,000 Pa, input frequency: 50 Hz, Equipment: type plate available, Dust extraction, filter ventilation, fume extraction, self-cleaning cartridge filter, pneumatic, vacuum system for plasma, laser, sandblasting, soda blasting, shot blasting, and for all types of dry dust. Brand: TEKA Model: Filtercube 4H Year of manufacture: 2008 The filter is cleaned by a microprocessor controller using pulses of compressed air during operation, resulting in high device efficiency. Low compressed air consumption thanks to the "Power-Spray" system. The central Filtercube filter ventilation unit, equipped with cartridge filters, provides an ideal solution for almost all problems in the field of fume and dust filtration. The fan is located on the clean side, minimizing the risk of explosion. The Filtercube production series is certified by a German institute according to DIN EN ISO 15012-1 and approved for welding class W3 as a stationary fume extraction unit. Lajdpfx Ame Aazd Eozsh Applications: central extraction system for multiple welding stations extraction system for welding robots extraction system for thermal cutting and grinding tables system for general ventilation of halls (push-pull system, buoyancy system) extraction system in combination with an extraction table extraction system for grinding non-explosive materials Parameters: *Fan with a power of 7.5 Kw. *Capacity 7500 m3/h *Maximum vacuum 3000 Pa *Filtration area 100 m2 *Noise silencer Stock number: 1178

Condition: used, Extraction system, central extraction, room air filter system, ETS Efficient Technical Solutions GmbH Central welding fume extraction system Year of manufacture approx. 2005 Volume flow rate approx. 5000 m³/h Laedoicic Hjpfx Amzsh Extraction connection at the filter inlet 1200 x 150 mm Exhaust connection at the filter outlet 400 x 300 mm Motor power 10 kW Mains connection 400 volts, 50 Hz - Control cabinet for wall mounting - Bag filter - Maintenance flap for filter replacement - Radial fan on top of the system Space requirement L x W x H 2000 x 1650 x 3650 mm Transport height without fan 3100 mm Weight approx. 2000 kg Very good condition

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, type of input current: three-phase, input voltage: 400 V, filter area: 64 m², suction capacity: 5,000 m³/h, negative pressure: 3,000 Pa, input frequency: 50 Hz, Equipment: type plate available, Nederman dust extraction unit, fume extraction system, self-cleaning cartridge filter, pneumatic, vacuum-based, suitable for plasma, laser, sandblasting, soda blasting, shot blasting, plastics, and catalysts, mineral processes, and all types of dry dust. The filter is cleaned pneumatically with pulses of compressed air during operation, ensuring high device efficiency. The fan is located on the clean side, minimizing the risk of explosion. Fan power: 5.5 kW Lodpfx Ajz R T Elomzeah Capacity: up to 5000 m3/h Vacuum: up to 3000 Pa Cartridge filter elements: 16 pcs Filtration area: 64 m2 Inlet diameter: 315 mm Dimensions: Length: 1.60 m Width: 1.65 m Height: 3.40 m Base: 1.32 m x 1.12 m Stock number: 1174

Condition: used, Welding fume filter, welding fume extraction, flexible extraction arm, welding fume extraction Laodpfx Aolry Tgjmzsh -Handover in the actual condition as seen -Welding fume extraction: with articulated extraction arm -Extraction fan: Brook Crompton 0.75 kW -extraction arm: total length 3880mm -Inlet connection: Ø 170/160 mm, outlet Ø 150 mm -Number: 1x suction available -Price per piece -Transport dimension: 1900/800/H560 mm -Weight: approx. 67 kg/pc.

Condition: good (used), filter area: 180 m², suction capacity: 9,000 m³/h, Dust extraction, welding fume extraction, filtering, self-cleaning filter, pneumatic, vacuum dust collector, absorber for plasma, laser, sandblasting and all kinds of dry dust. PLYMOVENT MDB / AZUR Cartridge filter cartridges cleaned pneumatically with pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. inlet diameter - 400 mm The fan has a power of 7.5 Kw. Capacity up to 9000 m3/h Filtration area of 180 m2 Dimensions: height - 3.10m width - 2.80m depth - 1.25m fan: 1.00m x 1.00m Laodpfxju A Thls Amzsh

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 18133-00 12632868, input voltage: 400 V, Nederman ventilation unit for extraction of paint dust, oil mist, and contaminated air Laedpfxew Hw Dgj Amzoh