Used Spraying Machine Venjakob Comfort 2017-M for sale (106,917)

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system type L102 automatically working hot water parts washing machine with basket drive by means of gear motor, 2 stainless steel washing pumps (Fab. Lowara), 2 pieces circulating 3-sided spraying systems. Insulation of the complete plant included. - Basket diameter: 910 mm - useful height: 520 mm Lhsdpfx Ajdz Dy Hekyef - max. loading weight: 250 kg - spraying pressure: 2x 3 bar - tank volume: 175 litres - heating: electrically adjustable (RT - 90°C) plant dimensions (LxWxH): 1.300 x 1.250 x 1.990h mm Empty weight: approx. 300 kg washing time clock freely adjustable (minutes and hours) complete cleaning machine (interior and exterior) made of stainless steel 1.4301 water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid lock Bath cover with fine filter (2.000 micron) 2 pcs. Suction filter as pump protection Operating hour meter Steam vapour extraction incl. condensate recirculation Parts washer is as good as new (test plant/technical centre) OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST !!! This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Year of construction: 2026, condition: new, Parts cleaning system, spray cleaning system type L90 automatic hot water parts washer with automatic basket drive by means of gear motor, stainless steel washing pump (Lowara), rotating 3-sided spraying system (from below, from the side and from above) with stainless steel nozzles. - basket diameter: 790 mm - useful height: 500 mm - max. loading weight: 150 kg - spraying pressure: 3 bar - tank volume: 105 litres - heating: electrically adjustable (RT - 90°C) Ljdpfx Akehgh I Seyehf plant dimensions (LxWxH): 1.150 x 1.250 x 1.900h mm Empty weight: approx. 220 kg Washing time clock freely adjustable via Omron timer (minutes and hours) complete cleaning machine (interior and exterior) made of stainless steel 1.4301 water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid lock Bath cover with fine filter (2.000 micron) Suction filter as pump protection Operating hours counter Steam vapour extraction incl. condensate recirculation Preparation for later installation of an oil separator Parts washer is as good as new, never used. OTHER BASKET DIMENSIONS AVAILABLE ON REQUEST !!!

Condition: as good as new (ex-display), Year of construction: 2025, Parts cleaning machine / spray cleaning system type L102 automatically working hot water parts washer with basket drive by gear motor, 2 stainless steel washing pumps (Fab. Lowara), 2 pieces circulating 3-sided spray systems. Insulation of the complete system included. - Basket diameter: 910 mm - useful height: 520 mm - max. loading weight: 250 kg - spraying pressure: 2x 3 bar - tank volume: 175 liters - heating: electrically adjustable (RT - 90°C) Lhjdpjhl H Uuefx Akyjf plant dimensions (LxWxH): 1.300 x 1.250 x 1.990h mm empty weight: approx. 300 kg washing time clock freely adjustable (minutes and hours) complete cleaning machine (interior and exterior) made of stainless steel 1.4301 water circulation and loading basket made of stainless steel 1.4301 Insulation of the complete system (tank and cabin) made of stainless steel 1.4301 Mechanical lid lock Bath cover with fine filter (2.000 micron) 2 pcs. Suction filter as pump protection Operating hour meter Steam vapor extraction incl. condensate recirculation Parts washer is as good as new (test plant/technical center) This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

Condition: used, Year of construction: 2011, Technical data: Lhjdpfx Akoytuadeyef - VEN SPRAY PERFECT automatic spraying machine - Year of manufacture: 2011 - Working width: 1,300 mm - Working height: 940 mm +-20 mm - Parts detection via light curtain - CNC 7000 control system - Right-hand side operation - Z16 dual gun drive - Water-sprinkled extraction system - Extraction system in stainless steel design - Extraction nozzle diameter 500 mm - Exhaust air capacity 10,000 m³/h - Paint recovery system via V-band - Feed speed continuously adjustable 3 - 9 m/min - Installed spray circuits 2 pcs. - Gun arm quick-change system, 2 pcs. - Number of installed spray devices 4+4 pcs. - Number of material pumps 2 pcs. - Supply air filter ceiling G5 - Length ~ 6,590 mm - Width 3,666 mm (+1,152 mm) - Height 2,500 mm - Total connection 22 KW - Volts, Hz 400 / 50 - Colour RAL 7035 - Location, in stock from Voltage fluctuations max. +/- 5 % The photos show the spray machines before the overhaul. _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, Year of construction: 2013, Overview This KeyKeg filling machine, MICROMAT M1/1‑F KeyKeg, was manufactured in 2013 by Germany m+f KEG Technik. The machine is designed for filling KeyKegs and was used in a brewery. The equipment is no longer required by the seller and can be visited at any time on request. Technical data  Formats: KeyKeg Application: KEG filling Operating pressure: 5.5 bar Electrical supply: 230/400 VAC Control voltage: 24 VDC Frequency: 50 Hz   Lsdpfx Aoyq Ia Eokyehf

Condition: used, Year of construction: 2017, machine/vehicle number: SO133, Used SIPA blow molding machine 2017 - 18.000 bphTechnical Specifications & Performance DataThis SIPA SFR EVO3 is a rotary stretch blow molding machine designed for high-efficiency PET bottle production in modern beverage operations. As a robust second hand asset for industrial packaging, it delivers reliable output for beverage production lines seeking consistent quality and throughput. The machine features an 8-cavity configuration and supports a broad range of bottle sizes commonly used across water and soft drink applications.Manufacturer: SIPAModel: SFR EVO3Year of manufacture: 2017Production speed: up to 18,000 bottles per hourNo. of cavities: 8Neck finish: PCO 28-1810Bottle formats: Compatible with 0.5L, 1.0L, 1.5L bottle formatsContainer type: Designed for PET bottle handlingBottle diameter (min–max, diagonal): 50–125 mmBottle height (min–max, without neck): 80–349 mmAdvanced Automation & Control SystemsEngineered for consistent performance, the SFR EVO3 integrates advanced automation with precise preform heating and controlled blowing sequences. Operator-friendly HMI and PLC-based control help streamline recipe management, process monitoring, and format changes. The machine architecture prioritizes repeatability of pre-blow and blow phases, promoting stable bottle quality across high-speed runs.Automated process control with user-oriented HMIEfficient preform heating for uniform material distributionQuick-change features to support format adjustmentsSafety-interlocked guards and emergency stop circuitry for operator protectionProduction Line Integration CapabilitiesThis blow molder integrates seamlessly into used bottling line configurations for PET, whether operated as a standalone unit upstream of a filler or synchronized within a complete beverage production line. The included preform feeding and preform cooling systems facilitate smooth infeed and stable production conditions, enhancing overall line efficiency.Inline or standalone operation with standard conveyor interfacesCompatible with downstream filling, capping, and labeling equipmentFlexible handling across 0.5L, 1.0L, and 1.5L bottle formatsSuitable for modernization or capacity upgrades in second hand packaging machinery setupsMachine Condition & Maintenance HistoryThe machine is currently working, indicating operational readiness within an active environment. Built in 2017, it offers a modern platform for operators seeking dependable performance and repeatable quality in PET bottle production. Its status as a functional, second hand unit makes it a strong candidate for rapid deployment in industrial packaging lines.Operational Performance & VersatilityWith 8 cavities and up to 18,000 bph output, the SFR EVO3 balances speed and quality for high-demand beverage production. The PCO 28-1810 neck standard supports widespread closure compatibility, simplifying cap sourcing and ... Lhjdpfsyhbihjx Akyjf

Condition: good (used), Year of construction: 2007, functionality: fully functional, Vertical CNC Machining Center Chiron FZ OSK S Magnum SK Ljdoypbmcjpfx Akyshf with NC swivel head, rotary table package, bar feeder, and discharge unit Year of manufacture: 2007, Factory overhaul in 2017 Operating hours approx. 22,500 h Technical data: Siemens 840D (PCU 20 / NCU 572.4) NC swivel head, swivel range -20° / +115°, water-cooled motor spindle, 15,000 rpm. Axes travel X 450mm / Y 270mm / Z 310mm Rapid traverse in X / Y / Z: 75 m/min. / Acceleration: X 1g / Y 1.5g / Z 2g 40 tool stations HSK-A 40, chip-to-chip time 2.6 sec. (vertical, to DIN standard) Additional equipment: Preparation for bar machining Rotary table package AWU 160 with D105mm (positioning axis), Hainbuch Spanntop collet chuck D100, additional equipment for 6th side machining Part removal handling and discharge unit for finished parts, bar loader IRCO SiMag 100.1-3000 (for round and profile material) Coolant gun, machine prep for high-pressure ICS 70 bar (vario-valve), fixture flushing Scraper-belt chip conveyor with discharge height 1050 mm, vacuum rotation filter VRF 400 ltr., manufacturer KNOLL MAHLE dual change-over filter Electrical cabinet cooler, signal light Tool life monitoring, tool breakage control, Single F500 3D probing system, Renishaw TS27R Brankamp Marposs collision monitoring CMS 100 Accessories: Breuning IRCO guide channel sets and Hainbuch collets (as per agreement) HSK-A40 tool holders Spare parts for this machine type including special operating materials Note on machine concept: Unmanned complete machining 24/7 of cubic components. Material supply via bar loader D100 / 3000 mm for round and profile material. Rotary table as positioning axis and machining of 4 surrounding faces via vertical milling spindle. Machining of the end face (5th side) horizontally with swivel head. Clamping of workpiece via clamping stock, separating workpiece and 180-degree rotation, machining of the 6th side again horizontally with swivel head. Removal handling and discharge unit into parts buffer. Note on machine condition: The machine was factory overhauled and technically updated in 2017 by Chiron (CMS). The last spindle replacement was carried out in September 2025. The last manufacturer service was in October 2025 (major annual maintenance, 4,000 h). From new until today, the machine has been continuously maintained, repaired, and kept up-to-date by the manufacturer through a full-service contract (preventive maintenance).

Condition: new, Year of construction: 2026, functionality: fully functional, workpiece weight (max.): 170 kg, grinding spindle speed: 45,000 rpm, spindle speed (min.): 5,000 rpm, spindle speed (max.): 45,000 rpm, clamping diameter: 140 mm, clamping length: 1,100 mm, warranty duration: 12 months, Workpiece Clamping Diameter : ø 3 – 140 mm (Optional: ø 210 mm) Workpiece Diameter : ø 3 – 310 mm Workpiece Length : 50 – 1.100 mm Centre Hole Diameter : ø 1 – 60 mm (Optional ø 100 mm) Workpiece Weight : max. 170 kg (Optional 1,000 kg) Center Hole Angle : 60 ° Accuracy : < 1 µm (Submicron accuracy) Spindle Speed : 5.000 – 45.000 rpm Grinding Cone Movements : 3+1 Rotation Orbital rotation Stroke movement +1 Workpeice rotation Quirlig Grinding Technique : Included (Cross-hatched grinding pattern) Semi-Auto Grinding Cone Dressing : Included Workpiece Rotation : Available (as a option) Dust Extraction And Filtration : Available (as a option) Grinding Process : Manual Sectors: : Precision Grinding, Aviation, Automotive, Machinery etc. Benefits: Sub-micron Precision: Achieve sub-micron (< 1 µm) precision in grinding thanks to Swiss engineering and a robust machine design. Sustainable Reliability: Ensure reliable and sustainable processing. Cost Efficiency & High Productivity: Benefit from lower production costs and high productivity due to a short grinding process and reduced production times for subsequent processes (cylindrical grinding). Lhjdewv Nq Rjpfx Akyef Quirlig Grinding Technique: Experience an optimized grinding process with the Quirlig Grinding Technique. Properly ground center holes that have cross-hatched grinding pattern. The cross-hatched grinding pattern ensures that oil is retained when the workpiece is placed between the centers during the cylindrical grinding process, creating a micro oil layer. The micro oil layer prevents unwanted "dry running" during cylindrical grinding. Low Maintenance Costs: Enjoy low maintenance costs throughout the machine's service life, thanks to Swiss-quality construction. The Zentroflex M-series center hole grinding machines are designed to deliver high-precision cylindrical grinding in the aviation, automotive, and machinery sectors. Additionally, the Zentroflex M-series is the ideal solution for recovering parts distorted after heat treatment or for reducing cylindrical grinding costs. Contact us for more details.

Year of construction: 2025, operating hours: 50 h, condition: as good as new (ex-display), Spray-Flood Cleaning System – Parts Cleaning System for Highest Standards and Precision/Ultra-fine Cleaning Basket Internal Dimensions (Product Carrier): LxWxH 600x400x300 mm Lhedpfx Ajg Itg Ejkysf Max. Load Capacity: 150 kg; loading trolley in front of the unit included 3-Tank Configuration: - Cleaning (600 liters) - Rinsing-1 (600 liters) - Rinsing-2 (600 liters) - System electrically heated - Cleaning methods: spraying, injection flooding, ultrasonic - Ultrasonic (rod transducer): 3,000 W effective / 6,000 W peak – 30 kHz - During cleaning, rinsing, and drying, the basket can remain stationary, swivel, or rotate (freely selectable in the program) - Hot air and vacuum drying (vacuum pump by Leybold, 300 m³/h) - Full filtration on all tanks (3), each equipped with Topline bag filter (by Eaton), filter fineness freely selectable - Automatic water replenishment in each tank - Preparation for coalescence oil separator - Preparation for installation of a demineralized water circulation system for rinsing water treatment Control system: Siemens S7-1200 with 16 programs Year of manufacture: 12/2025

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit Lhjdpfjdzp T Dsx Akyjf - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: used, Year of construction: 2008, machine/vehicle number: 7281, - Producer Elmag Superfici - Type Magnum 3.2.2 - Year of construction 2008 (2010) - Working width 1.350 mm - Working height 900 mm + - 20 mm - Operating side, right - Actual condition, machine is not overhauled - Duo gun drive system - Spraying gun carrier independently controllable - Dry filter system - Exhaust air 13.500 m³/h Lsdetz Dgzjpfx Akyjhf - Transport belttransport System - Feed speed adjustable bis 18 m/min - 2 belt cleaning units - Belt cleaning system with roller - Belt cleaning system, behind the machine - Lacquer reclaiming system with v-belt - Gun control system - PLC control with touch screen - Number of installed lacquer circles 2 Stk. - Supply air box - Length ~ 6.680 mm - Width 4.455 mm - Total connection power ~ 26.3 KW - Voltage / HZ 400 / 50 - Location, not on stock - Voltage fluctuation max. +/- 5 %

Year of construction: 1999, condition: used, machine/vehicle number: 942, - Manufacturer: Fladder - Type. Gyro 300 VAC Ex - Working width 1300 mm - Year of construction 1999 Lhodpfx Asvwa Drekyjf - Number of brush heads 6 pcs. - Rotating and oscillating sanding unit - 2 vacuum fans- Motor power 7.5 kW - With vacuum conveyor belt - Electrical connection switch cabinet 1, machine 10kW - Electrical connection switch cabinet 2, vacuum fan, 15kW - Feed infinitely variable 2 - 8 m/min - Length 2070 mm - Width 2370 mm - Height 2240 mm - Weight 2300 kg - Separate switch cabinet, Dimensions: W: 800mm, Depth: 400mm, Height: 1700mm - Location, in stock - Volt, HZ 400 / 50

Condition: used, Year of construction: 2004, machine/vehicle number: 02919475, - Manufacturer Cefa - type. KLEENSPRAY - Year of construction 2004 - Operating side left - Working width 1.200 mm - Working height 900 mm + - 20 mm - Gun drive single version - Dry extraction - Extraction nozzle diameter 490 x 350 mm - Exhaust air capacity 6,500 m³/h - Paper belt transport system - Infinitely variable feed speed 1.5 - 7 m/min - PLC control with touch screen - Number of spray guns installed 0 pcs. - Height-adjustable spray guns - Number of paint pumps 0 pcs. Lhsdpfx Aksv N D Ewsyof - Suitable for solvent-based paints - Suitable for water-based paints - Length 4,450 mm - Width 3,360 mm + 1000 mm - Height 2,600 mm - Total connection ~ 7.1 kW / 28.6 A - Volt, Hz 400 / 50 - Location, in stock - Voltage fluctuations max. +/- 5 _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: used, Year of construction: 2005, - Manufacturer: Cefa - Type: KLEENSPRAY - Year of manufacture: 2005 - Working width: 1,200 mm - Working height: 900 mm + - 20 mm - Operating side: right - Price for reconditioned machine - Gun drive: Duo version - Height-adjustable sprayers - Dry extraction - Extraction nozzle diameter 490 x 350 mm - Exhaust air capacity ~ 6,500 m³/h - Paper belt transport system - Feed speed continuously adjustable 1.5 - 7 m/min - PLC control with touch screen - Number of sprayers installed 0 - Number of paint pumps 0 - Suitable for solvent-based paints - Suitable for water-based paints - Length 4.300 mm - Width 3.360 mm + 1.850 mm - Height 2.700 mm - Total connection ~ 7.1 kW / 28.6 A Lodpfx Asxnbhvskyshf - Volts, Hz 400 / 50 - Location, in stock - Voltage fluctuations max. +/- 5% _____ Optionally, we can also provide you with a quote for assembly and commissioning of the system, as well as training for employees. On request, we also offer regular maintenance and servicing of the machine. For further information, please contact us!

Condition: used, Year of construction: 2008, Spraying machine CEFLA FINISHING EASY 2000 DUO D Pictures are only sample - Producer Cefla - Type EASY-DUO - Year of construction 2008 - Working width 1300 mm - Operating side, left - Prize for overhauled machine - Actual condition, machine is not overhauled - Duo gun drive system - Dry filter system - Exhaust air 12.000 m³/h - Transport belttransport System - Feed speed adjustable 2 - 8 m/min - Belt cleaning system with roller - Lacquer reclaiming system with v-belt - Number of installed lacquer circles 2 Stk. - Number of installed spraying guns 4 Stk. - spray gun type Kremlin AVX - Airmix spraying system - Height adjustment for spraying guns - Number of lacquer pumps 1 Stk. - Producer lacquer pump Kremlin 16-120 - Supply air box - Ex-prevention - Suitably for solvent based lacquer - Suitably for water based lacquer - Used machine, good condition - Length ca. 6152 mm - Width 3.700 mm - Height 2.895 mm - Total connection power 18 KW - Location, on stock - Voltage fluctuation max. +/- 5 % _____ Lsdpfx Aksqhquwsyohf Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in contact with us!

Condition: used, Year of construction: 2001, machine/vehicle number: 5358, - Manufacturer Elmag Superfici - Type. TWIN SPRAY - Year of manufacture 2001 - Working width 1,300 mm - Working height 890 mm + - 20 mm - Operating side right - Price for overhauled machine - Gun drive in duo version - Dry extraction - Exhaust air output 8,000 m³/h - Belt transport system - Belt cleaning via roller cleaning system - With belt cleaning system - Belt cleaning, behind the machine, in the direction of travel, - With paint recovery - Gun control - Number of installed spray guns 4 pcs. - Spray guns type. Kremlin ATX - Airmix spray system - Supply air filter ceiling - Length 5,950 mm - Width 3,980 mm - Height 2,790 mm - Total connection 21 KW, 40 A - Volt, Hz 400 / 50 - Location, in stock _____ Ljdpfxoumvk Aj Akyohf Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in contact with us!

Condition: used, Year of construction: 2018, Technical data: Pos.1 - Dedusting VEN CLEAN Smart - Working width: 1,300mm - Length: 1,060mm - Roller transport: 1,000mm - Extraction fan 4,000m/h - Compressed air 980Nl/min. - Deduster Air nozzles - With ionisation Pos.2 - Automatic spray gun VEN SPRAY PERFECT - Year of construction 2018 - Working width: 1,300 mm - Working height: 940 mm +-20 mm - Part detection via light curtain - CNC 7000 control unit - Operating side right - Gun drive in Duo version Z16 - Dry extraction with filter - Extraction nozzle diameter 500 mm - Exhaust air capacity 10,000 m³/h - External filter box, LxDxH: 3500x1280x2740mm - Paint recovery system via V-belt - Infinitely variable feed speed 2 - 6m/min - Installed spray circuits 2 pcs. - Gun arm quick-change system, 1pc. - Number of spray guns installed 4 pcs. - Number of material pumps 1pc. - Supply air filter cover G5 - Length ~ 6,590 mm - Width 3,666 mm (+1152mm) - Height 2.500mm - Total connection 21 KW Lsdpfovvbqqox Akyehf - Volt, Hz 400 / 50 - Colour RAL 7035 - Location, from 01/2025 in stock - Voltage fluctuations max. +/- 5% _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: as good as new (ex-display), The Vector 1000 M Si (15" Multitouch-Panel/SK40) is an advanced Vertical Machining Center within the C-Frame Vertical CNC Centers category, designed by KNUTH for tackling complex manufacturing tasks. This compact all-in-one machining solution is built with a rigid structure, featuring a 30 mm preloaded ball screw and dual-arm tool changer with 24 stations, ensuring both flexibility and efficiency for everyday production needs. Its robust design allows for high accuracy and excellent force absorption during machining, supported by 30-bar internal cooling for superior machining quality. With the Siemens Sinumerik 828D control panel, operators can benefit from maximum precision and user-friendly programming via a 15-inch multitouch display, enhancing productivity and ergonomics. Ideal for multi-shift operation, this machine is perfect for achieving optimized performance in various milling applications. For more information or to request a quote, explore the unique features of the Vector 1000 M Si in the Vertical Machining Centers and C-Frame Vertical CNC Centers range. Lhedpfxoyg Dine Akyef

Condition: as good as new (ex-display), The VECTOR M 850 Si, a leading model in the Vertical Machining Centers category, represents an advanced solution within the C-Frame Vertical CNC Centers product group by KNUTH. This compact all-in-one machining center features a rigid structure designed for optimal stability and floor space efficiency. It utilizes 30 mm preloaded ball screws and a digital drive package, facilitating high torque and a precise table guide. The dual-arm tool changer with 24 stations ensures flexibility for daily production demands. Notable specifications include a travel of 850 mm on the X-axis and 550 mm on the Y-axis, along with a 30-bar internal cooling system that enhances machining quality. The Siemens Sinumerik 828D control system, equipped with a 15-inch multitouch panel, provides an intuitive interface for seamless operation, while the machine's maintenance-free design maximizes operational uptime. For further details and to request a quote, explore the capabilities of this robust Vertical Machining Center and enhance your machining precision today. Ledpfxjyg Dgmj Akyohf

Condition: as good as new (ex-display), The Vector 1000 M Si is a versatile and powerful Vertical Machining Center in the C-Frame Vertical CNC Centers group, designed by KNUTH to tackle complex manufacturing tasks with ease. This compact all-in-one solution features a rigid machine structure with an extra deep center of gravity and a small footprint, which optimizes its operation. It includes 30 mm preloaded ball screws and a digital drive package for high torque and precision. The dual-arm tool changer with 24 stations facilitates flexibility and efficiency for daily production needs. With the Siemens Sinumerik 828D control system, users can expect maximum machining precision, intelligent kinematic transformations for complex parts, and features like the Advanced Surface for superior finishes in mold-making applications. The machine is equipped with a 15-inch multitouch panel that enhances usability and ergonomic comfort, making it suitable for multi-shift operations. To enhance your manufacturing capabilities, request a quote for the Vector 1000 M Si, a top-tier choice in Vertical Machining Centers and C-Frame Vertical CNC Centers. Lhedpfx Aeyg Dgtekysf

Condition: excellent (used), Filling machine TM Industry Belgium M 25 for filling liquids Filling range 0,5-30kg Very good condition, directly from production!!! Lhjdoiu H Uvspfx Akyef

Year of construction: 2023, operating hours: 300 h, condition: excellent (used), functionality: fully functional, The BM 1000 K is a high-performance automatic spray painting machine designed for professional, industrial finishing of flat and profiled parts. It delivers uniform, high-quality coating for water-based and solvent-based paints, varnishes, primers, dyes, and adhesives, making it an ideal solution for furniture, doors, cabinet fronts, and glass components. Lhedjyrgyajpfx Akyof Equipped with a precision sensor reading system, high-pressure spray guns, and an automatic paper belt conveyor, the BM 1000 K ensures accurate paint application with minimal overspray and material waste. The machine features efficient filtration and ventilation systems, automatic lubrication for long service life, and a user-friendly touch-screen control panel for easy operation and parameter control. This machine is a reliable and cost-effective choice for small to medium-sized manufacturers looking to increase productivity, improve surface quality, and reduce operating costs.

Condition: like new (used), Year of construction: 2011, functionality: fully functional, type of input current: three-phase, input frequency: 50 Hz, temperature: 60 °C, load capacity: 250 kg, SUMMA DC3/OSK rotating basket, rotating drum cleaning equipment, Carousel degreasing machine with dryer. Lhsdewty H Depfx Akyjf The chamber rotary machine of the Czech manufacturer operates on the principle of pressure spraying. The degreasing machine offers three surface cleaning combinations. The machine is suitable for surface degreasing of a wide range of materials. Manufacturer: SUMMA DC3/OSK Year of manufacture: 2011 Max. workpiece size: 770x500mm Max. workpiece weight: 250kg Electr. Power: 23kw Bath temperature: Max. 60°C Air temperature: Max. 120°C Bath (rinsing) heating: 12/6kw Drying air heating: 13.5kw Aerosol pressure: 0.28Mpa Pump performance: 70 liters/minute Machine weight: 520kg Machine dimensions: 1800x1800mm Height: 1500mm If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Year of construction: 2025, condition: as good as new (ex-display), The "RH S" spray cleaning system is a compact, space-saving, fully automatic cleaning system designed to meet demanding requirements for cleaning/degreasing and drying results. Component cleaning can be performed with the basket in a stationary, swiveling/oscillating, or rotating mode. The spray system, featuring multiple spray bars mounted on the longitudinal and end sides, is fixed inside the working chamber. Basket dimensions: LxWxH 470x320x200(h) mm Two baskets can be washed in parallel (simultaneously) Maximum loading weight: 100 kg Lhodpogrm Dfsfx Akyjf Spray pressure (wash cycle): 4 bar, Circulation rate: 360 l/min Control: Siemens S7-1200 with KTP700 touch panel Includes hot air drying (12 kW) Includes compressed air impulse blowing Includes steam extraction Includes stainless steel exterior cladding Includes preparation for retrofitting an oil separator Includes bag filter for medium maintenance Includes 2 stainless steel wire baskets, 470x320x200(h) mm System dimensions: LxWxH 1,425x1,920x1,980(h) mm Dimensions include open loading door Electrical connection value: approx. 25 kW

Condition: new, SprayClean Front Loading Spray Washing Machines Ledpfxjd Hbp Ee Akyohf SprayClean systems are designed to clean parts automatically with pressurized hot water plus a biodegradable detergent. SprayClean machines are front loading systems and have tank heating insulation, vapour extraction and pneumatic control door as standard features. Rinsing and drying processes can also be added to this model meaning the whole process of washing, rinsing and drying can be completed in the same location. Multiple systems are controlled via PLC control in the main control panel. The SprayClean also comes with a large range of optional accessories from oil skimmers, oil separators, filtration units, tank discharge pumps, loading/unloading carts, cabin insulation and many more. - Pneumatically powered vertical opening front access door - Heavy duty stainless steel mesh motor driven component basket - Integral fluid filtration system - Corrosion resistant spray jets - Chemical & corrosion resistant stainless steel pump - Microprocessor or PLC controlled - Electrical powered fluid heating - Optional double skinned fluid tanks with 20mm thick insulation