Used Ssb Dg-Oe-0375.203.40-B8 for sale (1,811)

Condition: ready for operation (used), SSB Antriebstechnik DV-SgBH053-0480.600.40 geared motor SN: 96020557001, used, normal signs of wear, 100% functional, delivery as shown in photos. Ledpex Dwchofx Aiieab

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2018, operating hours: 11,449 h, load capacity: 1,800 kg, lifting height: 3,150 mm, load center: 500 mm, fuel type: electric, mast type: duplex, construction height: 2,050 mm, fork length: 1,200 mm, empty load weight: 3,100 kg, color: red, Equipment: additional headlights, cabin, lighting, pallet forks, sideshift, trailer coupling, Linde E18 Duplex Three-wheel electric forklift from 2018 with a load capacity of 1800kg. Please note that this forklift is equipped with a 48V battery. Battery tested with 86% Mast is a triplex mast with full free lift and a lifting height of 4320mm. The forklift is equipped with a side shift. Flutter cabin pre-installation available. Double pedal. Rear loading possible. Charger included Hydraulics are tight, customer service done! All work carried out by a specialist dealer! Ledpswp Sb Sefx Aiijab Battery serviced. Battery was tested by a specialist service using the C5 procedure 92% (C5 test) Technical data: Manufacturer: Linde Model: E18 Year of manufacture: 2019 Load capacity: 1400kg Hours: 11449 Height: 2050mm Fork length: 1600mm. 1200mm or 1000mm possible Lifting height: 3150mm Mast: duplex mast with full free lift Side shift Rear loading connection Double pedal control Battery 86% remaining capacity Grammer seat Heat seating Street legal lights Hydraulics tight Work lights front and rear. Tires Very good, Charger 48V included Forklift in very good condition, with UVV inspection on request. Transport possible VAT can be declared Net export possible with either a valid VAT number in the EU or when exporting to a third country.

Condition: used, machine/vehicle number: 007662, Position 1: Panel Feeding and Loading STEFANI + MAHROS-EVOLUTION SSB + RUNNER Position 2: Panel Turning Device STEFANI + MAHROS-EVOLUTION SSB + RUNNER Position 3: Double Sided Squaring/Edgebanding Machines STEFANI + MAHROS-EVOLUTION SSB + RUNNER Lajdpfxewuzzfj Aiieb Position 4: Panel Turning Device STEFANI + MAHROS-EVOLUTION SSB + RUNNER Position 5: Panel Stacking and Offloading STEFANI + MAHROS-EVOLUTION SSB + RUNNER

Condition: used, Year of construction: 2022, machine/vehicle number: 0102-260011, Kaltenbach KBS750 DG Bandsaw Line with T14 transport system Lsdpfey Rimujx Aiioab Kaltenbach KBS 750 double mitre horizontal bandsaw with LS270 NC cross-cut fence and T14 transport system in steel trade version - operation and programming are carried out at the control panel. This Kaltenbach KBS 750 DG horizontal bandsaw is a very fast and powerful bandsawing machine that is ideally suited for sawing sectional steel such as horizontal double T-beams, L-steel U-steel, flat material and rectangular tubes. KALTENBACH KBS 750 DG band saw Semi-automatic two-column bandsaw for sawing profiles with double miter swivel device. Technical data Cutting capacity: with 90° saw cut 750 mm × 500 mm +70°: 730 × 500 mm -70°: 710 × 500 mm +60°: 670 × 500 mm -60°: 650 × 500 mm +45°: 550 × 500 mm -45°: 520 × 500 mm +40°: 500 × 500 mm +30°: 390 × 500 mm Technical data: Min. profile cross-section: 10 × 10 mm Saw blade dimensions: 6990 × 41 × 1.3 mm, type bimetal M42, Z3/4 Drive power: Saw with frequency control: 5.5 kW Hydraulic unit (4.9 l/min): 1.5 kW Cutting speed: 15-100 m/min, continuously adjustable from the control panel Feed: work feed: 0-300 mm/min Fast forward and return: 2500 mm/min Working height: 640 mm Compressed air connection: 6-8 bar Air consumption: 500 NL/min (according to DIN 1342) Saw weight: approx. 3200 kg Saw dimensions: 3230 × 1160 × 2420 mm Electrical system: Version according to EN 60204-1 Mains connection: 3 phases + N + PE / 50 Hz Power consumption: 17 kVA Fuse protection: 35 A Machine equipment Kaltenbach KBS 750 DG Very robust two-column guide for maximum precision. Inclined saw arm for higher performance and accuracy. Automatic table lowering during material transport Infinitely variable speed control via frequency converter. Hydraulic belt feed, manually adjustable NC-controlled angle adjustment with absolute value encoder Automatic cycle: Clamping - sawing - unclamping Horizontal clamping device: Fixed front stop, opposite clamping block via cylinder. Manually adjustable pressure reduction. Vertical tensioning device: Directly next to the belt; manually adjustable pressure. Backlash-free linear guides. Automatic adjustment of the belt guides Automatic cutting pressure control Remote diagnosis possible (telephone line required by customer) Hydraulic belt tensioning with electronic monitoring Automatic release at standstill Automatic stop in the event of belt breakage Micro-spraying system for clean operation and long service life Integrated chip container Separately driven chip brush Electronic slip monitoring Hydraulic heating

Condition: ready for operation (used), Year of construction: 2020, overall weight: 2,485 kg, This 3-axis Elumatec DG 244 was manufactured in 2020. It features a cutting length of 6.0 m and a maximum saw blade diameter of 550 mm, providing efficient cutting capabilities. The machine includes a complete extraction unit and a mobile workpiece support for enhanced functionality. If you are looking to get high-quality circular metal cutting capabilities, consider the Elumatec DG 244 machine we have for sale. Contact us for further details. - Cutting Length: 6.0 m- Saw Blade Diameter: Max. ø 550 mm- Saw Blade Bore: d 30 mm- Saw Blade Speed: 3000 1/min- Voltage: 3/PEN 400 V- Frequency: 50 Hz- Current: 21.8 A- Power: 9.2 kW- Operating Pressure: P 7 bar- Short-circuit current rating: Ik 10KA- Machine Weight: 2485 Kg- Included Components / Accessories:- Short-length stop for stationary aggregate- Complete extraction unit DG244 2x2.2kW- Profile lifting bar set for stationary and mobile aggregate- Pneumatic clamping device horizontal, per aggregate -230mm- Mobile workpiece support- Moving roller conveyor 1.5 m long, 400 mm wide for extraction unit Laedpfxoy Tm Saj Aiijb

Year of construction: 2023, condition: used, Field of application: Grounds care Tyre size: - Drive: Wheel Power: 3 kW (4 HP) Empty weight: 490 kg Top speed: 24 km/h Serial number: L4MCUCM47PA000041 Transport dimensions (LxWxH): 2.43x1.16x1.8 Ledpfx Aistr Tazeisab Please contact PFEIFER GROUP for more information

Year of construction: 2023, condition: used, Field of application: Grounds care Tyre size: - Drive: Wheel Power: 3 kW (4 HP) Lodpfetr Tbqex Aiijab Empty weight: 490 kg Top speed: 24 km/h Serial number: L4MCUCM46PA000046 Transport dimensions (LxWxH): 2.43x1.16x1.8 Please contact PFEIFER GROUP for more information

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, DG Line 6500 Automatic Perforating/Creasing Machine with Low Pile Feeder. The PIT STOP DG Line 6500 is perfect for companies offering print-on-demand services and requiring high-quality results from digitally printed materials, with fast and straightforward operation. The format is suitable for digital printing and also for book covers (books on demand) with an extension to 50×85 cm, or standard operation at 50×70 cm without the extension. Additionally, the PIT STOP DG Line 6500 can be equipped with a standard perforating kit (optional extra), which is programmable directly via the user display. Sheet Size Min / Max: 8×10 cm / 50×70 cm (extendable to 50×85 cm with optional feeder extension) Sheet Weight: 80 to 400 g.s.m. Programs: 20 programs with up to 20 operations each Minimum Creasing Distance: 0.1 mm Lasdpfsy Spaqjx Aiieb A4 Production (1 crease): up to 6,500 sheets per hour Power Supply: 230 V, 50 Hz, single-phase Power Requirement: 2 kW Net Weight: 180 kg Dimensions: 150 x 75 x 120 cm

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, cutting height (max.): 350 mm, total length: 15,000 mm, overall weight: 2,500 kg, type of input current: three-phase, Equipment: rotational speed infinitely variable, FOR SALE: Kaltenbach KBS 400 DG + NA 400 – Automatic Band Saw Line High-quality German engineering tailored for professional structural steel fabrication. This Kaltenbach sawing line is engineered for high-volume production, delivering exceptional precision and a high degree of automation. The Package Includes: Lsdpfoy Rvfwjx Aiijab Kaltenbach KBS 400 DG: Semi-automatic band saw with double-sided mitre cutting capability. Kaltenbach NA 400: NC-controlled material feed system (push-type) enabling fully automatic series cutting. Roller Conveyors: Heavy-duty infeed and outfeed roller tables. Technical Specifications: Manufacturer: Kaltenbach GmbH + Co. KG, Germany Model: KBS 400 Year of Manufacture: 2008 Voltage: 400 V / 50 Hz Main Fuse: 35 A (Total current: 25 A) Control Voltage: 24 V DC / AC Key Features: Double Mitre (DG): Saw frame swivels in both directions, allowing precise angle cuts without the need to turn the workpiece. NC-Controlled Feeding: The NA 400 offers precise length measurements and automated feeding, increasing productivity and minimizing operator errors. Reliability: Kaltenbach machines are renowned worldwide for their robust frames and durable hydraulic systems. Condition: Well-maintained industrial equipment, immediately ready for operation. This setup is the ideal solution for steel fabricators seeking to automate profile cutting with proven, industry-standard technology.

Condition: ready for operation (used), Year of construction: 2009, operating hours: 87,094 h, spindle speed (max.): 4,000 rpm, travel distance X-axis: 140 mm, travel distance Z-axis: 450 mm, spindle motor power: 18,500 W, total height: 1,917 mm, total width: 2,076 mm, overall weight: 5,200 kg, controller manufacturer: TRAUB, controller model: TX8i, product length (max.): 4,354 mm, number of slots in tool magazine: 10, number of axes: 7, This 7-axis TRAUB TNC 65 DG was manufactured in 2009. It features a powerful tool drive turret with a speed of 4000 rpm and a high-pressure coolant system with programmable pressure stages. The machine is designed for machining metals and plastics, equipped with a C-axis for numerically controlled turning and positioning. If you are looking to get high-quality turning capabilities, consider the TRAUB TNC 65 DG horizontal turning machine we have for sale. Contact us for further details. • Control system: TX8i with 64-bit RISC high-performance processor and additional PLC high-performance processor, integrated PC• TX8i control with TFT color flat screen and electronic handwheel• Multi-range transformer for 460V / 400V / 380V / 220V / 200V, 50 Hz• Machine operating voltage: 400V 50 Hz• Accessories operating voltage: 230V 50 Hz• Control voltage: 24V DC• Designed for machining metals and plastics with defined cutting edge• Maximum turning length: 450 mm• Main spindle bore: 65 mm• Spindle through-hole: 65 mm• Maximum clamping diameter depending on collet system: 60 mm• Front bearing diameter: 66 mm• Standard collet: DIN 6343• Maximum clamping diameter: 65 mm• Main spindle torque: 230 Nm• Main spindle C-axis numerically controlled• X-axis rapid traverse/feed speed: 7.5 m/min• X-axis feed force at 100% duty cycle: 5000 N• X-axis ball screw: 32×5 mm• Z-axis rapid traverse/feed speed: 10 m/min• Z-axis feed force at 100% duty cycle: 8000 N• Z-axis ball screw: 32×10 mm• Y-axis rapid traverse/feed speed: 3 m/min• Y-axis travel: ±35 mm• Y-axis feed force at 100% duty cycle: 8000 N• Y-axis ball screw: 25×5 mm• Tool stations: 10 (14 optional)• Tool holder size: Ø30×55 mm• Alternative tool holder size: Ø25×48 mm• Tool shank size: 20×20 mm• Alternative tool shank size: 16×16 mm• Counter spindle maximum speed: 4000 rpm• Counter spindle maximum clamping diameter: 65 mm• Counter spindle power: 11 kW• Counter spindle constant power range: 1:8• Counter spindle torque: 210 Nm• Counter spindle rapid traverse/feed speed: 10 m/min• Counter spindle travel: 520 mm• Counter spindle feed force at 100% duty cycle: 6000 N• Counter spindle ball screw: 32×20 mm• Counter spindle C-axis with speed-synchronous control• Tool drive turret 1: 3.1 kW, 4000 rpm• Tool drive turret 2: 3.1 kW, 4000 rpm• Tool monitoring TX8i with wear and breakage control via axis motor monitoring• Thread cutting without compensating chuck• TRAUB Polyform software for milling programming with C-axis (front, longitudinal, cylindrical surface)• Ethernet network connection preparation with RJ45 interface• Z/V-axis counter spindle software with defined end position (face transfer)• Hydraulic system pressure: 70 bar• Hydraulic tank capacity: 70 l• Coolant pump pressure: 12 bar• Coolant tank capacity with chip conveyor: 435 l• Electrical connected load: 39 kW• Machine weight with counter spindle and electrical cabinet: 5200 kg• Noise level: 73 dB(A)• Permissible ambient temperature: 5–40 °C• Maximum relative humidity at 40 °C: 50 %• Work area turret section: 450 mm• Work area to counter spindle: 520 mm• Total work area: 728 mm• Minimum distance F to counter spindle contour: 127 mm Additional equipment • Workpiece unloading device with gripper in turret 2• Hinged belt chip conveyor, discharge height 1200 mm• High-pressure coolant system with programmable pressure stages 20 / 5 bar• Preparation for extraction and filter system, connection Ø200 mm, 400V socket• Bar feeder interface preparation DNH 61 Lasdpfx Aisy Sg Nisieb

Condition: ready for operation (used), Year of construction: 2018, machine/vehicle number: 2300223434, functionality: fully functional, power: 1.5 kW (2.04 HP), input voltage: 380 V, input current: 16 A, input frequency: 50 Hz, type of input current: AC, overall weight: 280 kg, Equipment: CE marking, We purchased the machine new at the time and it has been used in our production for occasional sawing operations since 2018. Due to restructuring, the saw is now surplus and is to be sold. The machine is immediately ready for operation and functions perfectly. An on-site inspection under power can be arranged at short notice. We can also organize shipping quickly. BMBS 230 x 280 H-DG – Hydraulic swing frame metal band saw for miter cuts from +60° to -45° • Hydraulic swing frame metal band saw for miter cuts from +60° to -45° • Suitable for cutting, for example, stainless steel, tool steel, hollow profiles, and solid materials • Precise and robust blade guides with adjustable carbide plates • Saw blade tension is monitored electromechanically via microswitch • Equipped with a cooling system at the blade guides • Equipped with a chip removal brush for optimal cleaning and maintenance of the saw blade • When the saw arm is raised, the lowering cylinder automatically locks in the upper position—no additional locking on the cylinder is necessary • Saw arm is inclined at 25°, resulting in longer blade life • After completion of the cutting process, the saw blade stops automatically • Saw arm lowering by its own weight or manually (H-DG) Laodjy R Dcdspfx Aiisb Scope of delivery: • Saw blade • Coolant pump • Operating tools • Vice with quick-release mechanism Technical data Electrical connection: 400 V / 50 Hz Motor power: 1.4 / 2.0 kW Speed settings: 2 Blade speeds: 35 / 70 m/min Blade dimensions: 2720 x 27 x 0.9 mm Dimensions (L x W x H): 1650 x 885 x 1860 mm Table height material infeed: 785 mm Weight: 280 kg Feed length max. per stroke Minimum remnant length CNC operation Minimum remnant length manual operation Cutting capacities Cutting area 0° round profile: 230 mm Cutting area 0° solid round: 150 mm Cutting area 0° square material flat: 280 x 180 mm Cutting area 0° square material upright: 260 x 230 mm Cutting area -45° round profile: 195 mm Cutting area -45° solid round: 110 mm For additional cutting ranges, please refer to the documentation.

Condition: ready for operation (used), Year of construction: 1999, operating hours: 124,009 h, number of axes: 5, This 5-axis TRAUB TNC65 DG was manufactured in 1999. It features a robust control system with TRAUB TX8H technology, dual tool carriers with 10 stations each, and a maximum clamping diameter of 60 mm. The machine is equipped with a coolant cleaning system and a hinged belt conveyor for efficient chip removal. If you are looking to get high-quality turning capabilities, consider the TRAUB TNC65 DG horizontal turning machine we have for sale. Contact us for further details. • Control system: TRAUB TX8H (32-bit technology) • Main spindle: Yes • Counter spindle: Yes • Spindle synchronization: Yes • C-axis main spindle: Yes • C-axis counter spindle: Yes • V-axis: Yes (programmable position) • Tool carriers: 2 (tool carrier I and II) • Driven tools on tool carrier I: Yes • Driven tools on tool carrier II: Yes • Number of tool stations: 10 per tool carrier • Thread cutting: Without compensating chuck • Drilling and milling units: X-direction (i=1 and i=3) and Z-direction (i=1 and i=3) • Coolant system: Cleaning system with cyclone filter • Coolant tank capacity: approx. 470 liters • Coolant pump: Supply for both turrets integrated • Hydraulic system: Yes • Operating voltage: 400 V / 50 Hz • Control voltage: 24 V DC • Accessory voltage: 230 V / 50 Hz • Multi-range transformer: 460 V / 400 V / 380 V / 220 V / 200 V • Standards: EC Machinery Directive, EMC Directive, Low Voltage Directive, DIN EN 292, DIN EN 294, DIN EN 418, DIN EN 60204 • Tool monitoring: Tool breakage and wear monitoring • Programming software: TRAUB Polyform • Coolant type: Water-based coolant compatible Additional equipment • Chip conveyor: Hinged belt conveyor • Bar feeder: TRAUB DNH 61-3000 (preparation included) • Workpiece ejection device: Yes • Workpiece removal device: Yes, with gripper Laedpfjy R Uvuox Aiiob • Collet system: Röhm, max clamping diameter 60 mm Technical Specification Counter Spindle Yes Driven Tools Yes

Condition: used, Year of construction: 2018, Battenfeld MacroPower 700/2250 UNILOG B8 Clamping force: 700 tons Screw diameter: 65 mm Shot volume: 422 cm3 Distance between tie bars: 1100 x 950 mm Mold height: 450 x 950 mm Laodoy Tn Dkepfx Aiiob Hot runners: 16 Core pullers: 2 + 2 \+ Robot Wittmann W833PRO-0469 (X-900, Y-1800, Z-3000, Payload: 10,6 kg)

Condition: good (used), Year of construction: 1988, functionality: fully functional, Double mitre saw DG79 - 2 x 2 kW - 380 Volt - Year of manufacture: 1988 - 2100 / 3800 rpm - Saw blade 330 mm Ø Lajdpfxsygm Ake Aiisb - Cutting area at 90°: 195 x 90 mm; at 45°: 135 x 90 mm - Minimum cutting length 500 mm, maximum approx. 3300 mm - Compressed air 6-8 bar / 250 l/min - Weight: approx. 500 kg - Pneumatic clamping device Transport available at extra cost! Due to the age of the used machine, warranty is excluded for commercial customers.

Condition: new, Band saw machine Make: METALLKRAFT Model: BMBS 230 x 280 H-DG Art.no.: 3680013 Condition: New machine Cutting range (round): 230 mm cutting speed: 35/70 m/min standard equipped with: - horizontal vice Ledocuntzepfx Aiioab - length stop (600 mm) - Monitoring of saw band tension, electromechanical - chip clearing brush - coolant device - operating instructions

Condition: new, Band saw machine Make: METALLKRAFT Laodpfxoilg Hds Aiiob Model: BMBS 300 x 320 HA-DG Art.no.: 3690041 Condition: New machine cutting range (round): 300 mm belt speed: 20-100 m/min, infinitely variable standard equipped with: - Fully hydraulic, semi-automatic version. after starting, the machine clamps automatically after the end of the cut, it returns to the starting position stops the saw band and opens the vice. - Cutting probe for automatic detection of material height - Horizontal vice, mechanical, hydraulic - Monitoring of saw band tension, electromechanical - Chip clearing brush - Measuring stop with scale 1.000 mm - coolant device - Operating instructions

Condition: like new (used), Year of construction: 2025, functionality: fully functional, cutting length (max.): 6,000 mm, saw blade diameter: 550 mm, like new, previous company out of business Lajdpfsy Rp Tzsx Aiijb

Condition: good (used), Year of construction: 2003, - Power (kW): 2.4 - Voltage (V): 400 - Frequency: 50 Hz / 3 phases - Various drill bits and drill holders: included - CE Laedpfx Aioy H I I Asisb

Condition: used, Year of construction: 2007, functionality: fully functional, Horizontal Bandsaw Manufacturer: KALTENBACH Model: KBS 620 DG Year: 2007 Technical Data Manufacturer: Kaltenbach Model: KBS 620 DG Year of manufacture: 2007 Working range: 620 x 350 mm Working range (round): 360 mm Saw band dimensions: 6175 x 41 x 1.3 mm Cutting speed: 15-90 m/min Saw band inclination: 3° Feed rate: 0 - 300 mm/min Saw dimensions: L 3.0 x W 1.2 x H 2.10 m Roller conveyor size: L 8.6 x W 1.1 m (incl. stop) Weight: approx. 2.6 t Equipment • Roller conveyor with CNC length measurement system, L = 8600 mm • CNC stop travel 7200 mm • Minimum quantity lubrication • Laser cutting line indicator • Automatic saw blade cleaning • CNC control Kaltenbach AS620 • CNC stop control EPS 80 • Automatic vertical hold-down • Automatic horizontal hold-down All information without guarantee. Lasdoy H D Raspfx Aiieb A demonstration is available at any time in our showroom.

Condition: ready for operation (used), Year of construction: 2013, overall weight: 2,492 kg, Circular Metal Saw manufactured in 2013. This Elumatec DG 244 features a cutting length of 6,000 mm and a saw blade diameter of 550 mm. It includes a motorized tilting range from 22.5° to 140° and comes with a mobile roller conveyor for efficient extraction. If you are looking to get high-quality cutting capabilities, consider the Elumatec DG 244 machine we have for sale. Contact us for further details. • Cutting Length (X-Axis Travel): 6,000 mm (6.0 m) • Saw Blade Diameter: 550 mm Laodpfx Ajyv H Tisiijb • Controller: E 355 (2-Axis Control) • Tilting Range: 22.5° to 140° (Motorized E-Axis) • Software: Module for chop cuts and overlengths (E355/E555) • Software Interface: Connection for window construction programs Additional equipment • Short length stop: Included for stationary unit • Profile lifting rail set: Included for stationary and mobile units • Roller conveyor: 1.5 m, mobile, 400 mm width for extraction • Workpiece support: Mobile type • Extraction Unit: Complete for DG 244, 230/400V, 50Hz, 2x 2.2kW

Condition: good (used), Type: SSB 3 A Machine No.: 5607 Year of manufacture: 1973 Equipment: - MK3 quill - Machine lamp Ljdpfxsxlqxfj Aiisab - Quick-action drill chuck incl. morse taper arbor, clamping range 3-16 mm - Infinitely variable speeds Range 1: 0-900 rpm Range 2: 0-1700 rpm - Thread cutting device Condition: good, workshop-tested, speed variator with new bearings

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, cutting length (max.): 6,000 mm, total length: 7,500 mm, total width: 1,500 mm, total height: 2,000 mm, Technical data – Elumatec DG 244/2, year of manufacture 2008 Control unit model: E555 – touchscreen Technical advantages of the machine: - Saw blade diameter: 550 mm - Blade speed: 2800 rpm Lsdsyv E N Aepfx Aiieab - Compressed air supply: 7 bar - Weight: 2300 kg The machine is fully operational and can be tested on site. Price includes loading. We can also assist with delivery to the specified address. The machine is located in Poland – 33350. Inspection possible by prior arrangement. Our company is situated 120 km from Kraków airport (KRK). Transport possible. Export price.

Condition: good (used), Year of construction: 2000, Offer 24477 Lasdpfxsy H Dmhs Aiieb Technical Specifications: - Cutting range at 90° round: 220 mm - flat: 250 x 100 mm - square: 170 x 170 mm - Cutting range at 45° round: 150 mm - flat: 150 x 150 mm - Mitre adjustment left and right - Saw blade dimensions: 2890 x 27 x 0.9 mm - Cutting speeds: 40 + 60 m/min - Hydraulic lowering of the saw frame - Infinitely adjustable cutting pressure: 0 - 10 m/min - Total drive power: 400 V / 1.5 kW - Installation space approx.: W 1500 x H 1000 x D 650 mm - Weight approx.: 250 kg

Condition: used, Year of construction: 2022, functionality: fully functional, empty load weight: 270 kg, load capacity: 2,000 kg, Rotator Lsdjy Hmwcspfx Aiioab Load Center: 500 ISO Class: ISO Class 2 = 1,000 - 2,500 kg Condition: Ready for use and fully functional Technical Condition: Good Description: If you have further questions, feel free to call us. In addition to this model, we have around 150 other industrial trucks in stock. Please visit our website at fleischmann-foerdertechnik. Leasing & financing as well as delivery at favorable conditions can also be arranged for you. We also accept Linde equipment as trade-in – even if you do not purchase a vehicle from us. Recorded operating hours correspond to the status at the time of listing. Sale subject to prior sale, changes, and errors excepted.

Condition: ready for operation (used), Year of construction: 1982, An Elumatec double mitre saw for aluminium and plastic profiles, including E200 positioning unit, is available. Saw head swivel: 45°, saw blade diameter: 380mm, speed: 2800rpm, max. cutting capacity: 195mm/120mm, min. cutting length: 520mm, weight: approx. 1000kg. Documentation available. An on-site inspection is possible. Lajdpfx Aioy Hk Thsieb