Used Stokota 90 M3 ( Stas ) for sale (20,392)

Condition: new, Year of construction: 2026, Sawdust extraction HOLZING RLA S 300 8900 m3h extraction capacity ~ 8900 m3/h engine power 7.5 kW rotational speed 3000 rpm rated voltage 400 V, 50 Hz extraction port 300/200 mm extraction speed 28 m/sec. Number of filters 45 G filter category Polyester filter material Sound level 80 dB without connection / 65 dB when connected through the pipe to the machine Filter area 22 m2 Overall dimensions (length x width x height) 2260/920/2140 mm Weight 274 kg Gbjdpfx Afelkd Spsusu The suction fans are located in the vacuum cabin on the clean side of the air in special sound-absorbing cabins. They have a special blade design, which makes them more efficient and effective and also contributes to electricity savings.

Condition: used, maximum load weight: 30,060 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 06/2024, next inspection (TÜV): 06/2025, loading space length: 9,665 mm, loading space width: 2,475 mm, loading space height: 9,665 mm, loading space volume: 52 m³, Year of construction: 2024, Equipment: ABS, Kingpin load: National 12 t Axle load: National 8 t Axle spacing: 1310-1310 mm Fifth wheel height: 1150 mm Chassis width: 1400 mm Internal height: Front 2165 mm Internal height: Rear 2165 mm Overall width: 2550 mm Wheelbase: 6800 mm Overall length: 10656 mm Chassis material: Aluminum Tires: 385/65R22.5 Loading length: 9665 mm Axles: SAF Brake type: SAF - SBS 2220 Offset: 120 Option: 1st axle with lift axle and traction aid Activation of traction aid: Via a button in the truck (installation of the button is not included in the scope of delivery) and by pressing the brake pedal three times. Brake pad wear indicator: Not connected Tire pressure monitoring system (Tire Pilot) Without Tire pressure monitoring: Wabco Trailerpulse ECAS air suspension with raising and lowering valve Air suspension lowering: Automatic lowering of the air suspension during tipping, manually lockable via smartboard and switch on the chassis Pneumatic coupling head: European Palm coupling Chrome wheel nut caps with STAS logo Landing gear: Aluminum drop legs mounted at the front of the chassis, with individual controls on both sides, support force 20 t/P Underrun protection control: Manual Towing eye: 1x in the direction of travel Underrun protection mud flaps: Black with STAS logo Underrun protection cover: Handle on the underrun protection EBS control panel: Control panel: In the direction of travel, in front of the axles Toolbox position: On the left in the direction of travel, in front of the axles: Plastic Toolbox dimensions: Left in front of the axles: 860 x 520 x 500 Type of fender: Domar STAS with white line Gsdsuar Amspfx Afuobu Number of mud flaps on the fender 2x Mudguard type: Clear Pass Lighting manufacturer: Aspöck Lighting type: ECOLED II Work lights (switch operated) Position of work lights (switch operated) 2x LED reversing lights, front, left and right, in the area of the landing gear Tilt cylinder manufacturer: Hyva Tilt cylinder type: Hydraulic cylinder with large casing Tilt cylinder model: Hyva - FC 169 Tilt cylinder stroke: 7130 Tilt cylinder max. pressure: 250 Surface treatment of cylinder stages: Standard surface treatment Hydraulic coupling: Swivel coupling Hydraulic coupling - size 1 Hydraulic coupling - gender: Female Hydraulic coupling - hose 2,500 mm Smartboard Aluminum leaning ladder 3 m Left-hand ladder attachment for rear entry: With hook for hanging Position of broom and shovel holder: With 3 holders each, on the chassis on the left in the direction of travel Loading pressure gauge Ø 100 mm - mounted on the front of the chassis With two Plastic wheel chocks including bracket Chassis safety device - body rubber pads Air and electrical console, centered in the direction of travel, with boom End wall inclination (°) 90 Rear wall inclination (°) 90 Rear wall type combi-door Inner lower chord profile inclination (°) 90 Floor 8 mm aluminum - 110 Brinell Position of rubber pads below the floor cross members End wall 4 mm (aluminum) Side wall profile 3 mm - 2 mm, smooth inside and outside, double-walled profiles 600 mm wide - 30 mm thick Rear wall aluminum Combi-door type 1/2 - 1/2 with pivoting door end cross member Door leaf opening: Right door leaf opens first (STAS manufacturer's choice) Door end cross member: Pivoting design Hinge type: With double door hinge (double-joint hinge) Slider: Rectangular design, standard Slider position 2 sliders with operating handles, one each on the left and right in the direction of travel. Securing the open door leaves. The

Condition: used, maximum load weight: 32,950 kg, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 06/2024, loading space length: 10,450 mm, loading space width: 2,480 mm, loading space height: 2,100 mm, loading space volume: 54 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2024, Equipment: ABS, 3-Axle Stas S 300CX Tipping Semi-Trailer VIN: 080246 Chassis / Components: * Air suspension / Raise and lower function * Lift axle, 1st axle * Weweler supports * WABCO Smart Board * Alcoa aluminum rims * Tires: 385/65 R.22.5 * Remaining tire tread: 1=90% 2=like new 3=90% * 3 x Jost axles with disc brakes * 2x PVC storage box * 2x Work lights * Aluminum chassis Body: * Tipping semi-trailer * Hyva tipping cylinder, max. 220 bar * Volume: approx. 54 m³ * 2x pneumatic locking * Roller cover * Standing platform at the front * Portal doors 50:50 Weights: Gbodpfsyl N N Djx Afueu * Gross weight: 39,000 kg * Payload: 32,950 kg * Tare weight: 6,050 kg Other: * German registration * New MOT / safety inspection available upon request New main inspections / safety checks or weight reductions/increases are available upon request. We will gladly assist you in obtaining export/transfer license plates, and we can also arrange for the transportation of your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing and typographical errors, changes, prior sale and errors reserved!----Who are we? Leible Nutzfahrzeuge is a family-owned company based in Kehl on the Rhine. Thanks to our many years of experience in the preparation and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. On 11,000 m², you will find a wide variety of vehicles. Our corporate philosophy is characterized by fairness and integrity. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will assist them with the purchase or sale of vehicles. Convince yourself! Our services for you: Loading of vehicles We will gladly assist you in loading your purchased vehicles. Organization of special transports We will gladly assist you in organizing special transports. Temporary registration / Export license plates We will gladly assist you in obtaining export license plates/short-term registration. Handling of customs formalities We will gladly assist you in handling customs matters.

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 02/2024, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space height: 2,821 mm, loading space volume: 91 m³, total length: 14,000 mm, total width: 2,550 mm, Year of construction: 2024, Equipment: ABS, Chassis Type: Sliding Floor King Pin Load (National) (t): 12 Axle Load (National) (t): 8 Axle Distance (mm): 1310-1310 Saddle Height (mm): 1150 Loading Width (mm): 2475 Technical Permissible Total Weight: 39 = 12 + 9 + 9 + 9 Wheelbase (WB) Sliding Floor Trailer (mm): 7850 Internal Height Front (mm) (IHF): 2641 Internal Height Rear (mm) (IHB): 2821 Loading Length (mm): 13513 Volume (cbm): 91.3 Total Width (mm): 2550 Total Length (mm): 14000 Chassis Tire Size: 385/65R22.5 Godpfx Afszxvvveuebu Chassis Neck Height (mm): 217 Brake Type: Disc Brake Brake Type: SAF SBS 2220 Offset (ET): 120 Option: 1st axle with optimized starting aid Activation of starting aid via button in the truck (button installation not included in the equipment scope) and by pressing the brake pedal three times Air Suspension: ECAS with lifting and lowering valve Lowering of air suspension via Smartboard, as well as lifting and lowering valve Coupling Head: Pneumatic European Palm Coupling Support Winches: Weweler as steel geared support winches, type Weweler, with compensating support winches, single-sided operation and 2 speed levels Operator Console: EBS operation on the left side in the direction of travel, behind the axles Position Operator Console: Sliding floor on the left side in the direction of travel, behind the axles. Toolbox on the left side in the direction of travel, behind the axles. Manufacturer Lighting: Aspöck Work Lights (operated via switch): 2 pieces LED reversing lights front in the direction of travel on the left and right, mounted in the area of the support winches Hydraulic Coupling: Swivel coupling size ?? Gender: Female Hydraulic Coupling: Return Swivel Coupling Size 1 Gender: Female Hydraulic Coupling: Hose 3,000 mm Hydraulic Coupling: Position Connection possibility on the front wall (also with connection possibility on the support legs) Type: Smartboard ECAS control box Aluminum access ladder 3.80 m on the right side in the direction of travel Broom and shovel holder on the side impact protection on the left side in the direction of travel Sliding Floor System: Manufacturer Cargo Floor Air and electrical console in the middle in the direction of travel with mounting brackets Protection of the lighting unit: One-piece mud flap Superstructure Inclination Front Wall (): 90 Inclination Rear Wall (): 90 Rear Wall Type: Swing Doors Cover Plate between Floor and Front Wall: Solid aluminum plate and PVC strips Profile Front Wall: 3 mm 2 mm in smooth design inside and outside, double-walled profiles 600 mm wide, 30 mm thick Operation of floor system: Radio remote control Cargofloor Control Type: CF 500 SL-C-?E?-Control 21 floor profiles 10 mm ribbed, residue-free discharge wall Aluminum with brushes Storage residue-free discharge wall: 6 wheels with bidirectional cleaning (loading floor) Design: swing door division ? to ?, with door closing cross member Door closing cross member in swiveling design, aluminum Locking Rear Doors: 1x turning rod / door half Additional locking rear wall: Pneumatic, single-acting Ramm Protection Rear Doors: Aluminum Ramp buffer over the entire width of the rear wall Tensioner for tarpaulin tensioning: Tensioner with handle, mounted on the underside / side wall of the superstructure Walkway on the front wall with access and bracket protection, mounted, design STAS aluminum walkway Position Access Walkway: Access ladder mounted on the left and right side in the direction of travel Step ladder in the rear end: Extendable step ladder, mounted

Condition: new, axle configuration: 3 axles, loading space length: 8,880 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, loading space volume: 47 m³, total length: 10,259 mm, total width: 2,550 mm, total height: 2,165 mm, Year of construction: 2026, Equipment: ABS, Equipment: * Chassis material: Aluminum * Chassis type: V-chassis * Fifth wheel load National (t): 12 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1175 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 080 * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 8880 * KC-Value: 0400 * Overall width (mm): 2550 * Volume (m³): 47.5824 * Wheelbase (mm) (WB): 5800 * Overall length (mm): 10259 * Chassis * Axles, brakes and suspension * Axles: SAF * Offset (ET): 120 * Option: 1st axle with lift axle and traction aid * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator * Return-to-ride (RTR): 15 km/h * ECAS air suspension with lift and lower valve * Automatic lowering of air suspension during tipping, can be manually locked via Smartboard and switch on the chassis * Pneumatic coupling head: European palm-type coupling * Operation console: EBS controls on the left in direction of travel, ahead of the axles * Standard Smartboard * Air and electrical console on the right in direction of travel * Landing gears: Weweler steel gearbox-type landing gears with compensating feet, single-sided operation and 2-speed * Tire dimension: 385/65R22.5 * Tire pressure monitoring: Wabco TrailerPulse * Rims: Alcoa Dura-Bright * Tire type: Regional distance * TPMS sensor type: Rim-mounted sensor * TPMS sensor * Chrome lug nut covers with STAS logo * Work light position (operated by switch): 2 LED reversing lights at rear, left and right in direction of travel, mounted on lamp bracket * Work light position (operated by switch): 2 LED reversing lights at front, left and right in direction of travel, mounted at landing gear area * LEDs in door end cross member: 2 x 3-function LED * Underrun protection operated manually * Tow eyes: 2 each left and right * Splash guards on underrun protection: Black with STAS logo * Cylinder tipping angle normal ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 6480 * Tipping cylinder max. pressure: 250 bar * Cylinder stage surface treatment: Standard surface * Hydraulic coupling: Swivel coupling * Hydraulic coupling - size: 1 * Hydraulic coupling - gender: Female * Hydraulic coupling - hose: 2,500 mm * Mudguard type: Domar STAS with white stripe * Number of splash flaps on mudguard: 2 pcs * Mudguard splash flap type: Asphalt * Toolbox: 860x520x500 mm * Aluminum access ladder, 3 m - right side in direction of travel * Broom and shovel holder * Ferry lashing rings * 2 lashing eyes at rear of the chassis * Two plastic wheel chocks * Retention device chassis to body: rubber polyp Body: * Front wall angle (°): 20 * Rear wall angle (°): 90 * Inner lower belt profile angle (°): 45 * Front wall: 4 mm (aluminum) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm ALU - 110 Brinell * Rubber pads installed below floor cross members * Rear wall: Kombi-door type Gbsdpfx Afoy Dmvmousu * Kombi-door type: 2/3 - 1/3 with swiveling end cross member * Door wing opening: right wing opens first * End cross member of door: swiveling design * Hinge type: with double door joint * Slide: Rectangular design * Slide position: 1 piece in center * Grain discharge / dust bag: 1 piece grain chute incl. dust bag * Rear wall: smooth surface * Door wings secured open with chain

Year of construction: 2000, condition: ready for operation (used), Clamping force: 3000kN, stroke volume: 1047cm³, shot weight: 953g, injection pressure: 1778bar, screw diameter: 70mm, tie-bar spacing: 630mm, opening stroke: 1150mm, ejector stroke: 200mm, installation height: 330mm, platen width: 1050mm, platen height: 995mm. Machine dimensions X/Y/Z: approx. 6250mm/2050mm/2400mm, weight: approx. 12500kg. Documentation available. An on-site inspection is possible. Gjdozcyqtjpfx Afusbu

Condition: new, Year of construction: 2026, extraction capacity ~ 8900 m3/h engine power 7.5 kW rotation speed 3000 rpm/m rated voltage 400 V, 50 Hz extraction nozzle 300/200 mm extraction speed 28 m/sec. number of filters 45 filter category G filter material polyester noise level 80 dB without connection / 65 dB when connected via pipe to the machine Gjdpfx Afov Dvbaouebu filter surface 22 m2 dimensions 920 x 2260 x 2250 mm weight 450 kg negative pressure 3000 Pa Polyester filter, 3 microns 2 containers Traction Filter cleaning by vibration system with control + 850 euros for model with fire extinguishing system (Safe System) + 550 euros for model with inverter (speed regulation)

Condition: new, overall weight: 36,000 kg, loading space volume: 68 m³, Year of construction: 2026, Equipment: ABS, ferroSTAR 68 cbm Silver-grey Gbedpez Exbrjfx Afusu Chassis material: Steel Chassis type: Z-chassis Axle spacing (mm): 1310-1310 Fifth wheel height (mm): 1150 Chassis width (mm): 1400 The widest chassis on the market with 1400 mm for maximum stability and safer handling. Load width (mm): 2325 Standard chassis: 110 Interior height, front (mm) (IHF): 2,460 Interior height, rear (mm) (IHB): 2,460 Load length (mm): 11744 Overall width (mm): 2550 Volume (m³): 68.00 Wheelbase (mm) (WB): 7,753 Overall length (mm): 13,128 Axles: SAF Axle version: Intra Brake version: Disc brake Brake type: SAF - SBS 2220 (Haldex) Offset (ET): 120 Option 1: 1st axle with lift axle and starting assist Starting assist activation: via button in the truck (button installation is not included in the scope of delivery) and by pressing the brake pedal three times. Option 3: 3rd axle with lift axle Brake pad wear indicator: connected Return-to-ride (RTR): 15 km/h Air spring protection plate ECAS air suspension with raising and lowering valve Automatic lowering of the air suspension during tilting, manually lockable via Smartboard, as well as switch on the chassis Coupling head: Pneumatic, European Palm coupling Control console: EBS control on the left side in the direction of travel, in front of the axles Standard: Smartboard Air and electrical console on the right side in the direction of travel Support winch: Type JOST MODUL Tires: Tire size 385/65R22.5 Tire pressure monitoring: Wabco OptiTire Rims: Alcoa Dura Bright TPMS sensor type: Rim-mounted sensor TPMS sensor supplier: ZF Wheel nut covers: Chrome-plated Lighting manufacturer: Aspöck Lighting type: ECOLED III - with STAS logo 2 LED reversing lights, rear, left and right in the direction of travel, mounted on the lamp carrier Position of work lights (operated via switch): 2 LED reversing lights in the front, left and right in the direction of travel, mounted in the area of the support winches Underrun protection Operation of underrun protection: manual Splash guard for underrun protection: Black with STAS logo Tilting cylinder: Hyva (STAS manufacturer choice) Type of tilting cylinder: Cylinder with small housing Tilting cylinder angle: Normal ±47° Tilting cylinder model: Hyva - FC 169 Stroke of tilting cylinder: 8130 Tilting cylinder max. PTO pressure: 250 Hydraulic coupling: Swivel coupling Hydraulic coupling - size: 1 Hydraulic coupling - gender: Female Hydraulic coupling - hose: 2,100 mm Number of splash guards on the fender: 2 pieces Toolbox Aluminum extension ladder with a length of 2.8 m, mounted on the right side in the direction of travel Broom and shovel holder with 3 holders each Load pressure gauge: Ø 100 mm Two plastic chock blocks Structure: Front wall inclination (°): 20 Rear wall inclination (°): 90 Front wall made of 3 mm HB450 Side wall made of 4/3 mm HB450 Floor made of 5 mm HB450 Position of rubber pads: mounted below the floor crossbeams Rear wall type: Hinged doors Rear wall made of 3 mm HB450 Number of hinges for rear wall: 3 pairs of door hinges Design of hinged door: 1/2 to 1/2 split, with 1 piece of latch Door wings open first on the right The open door wings are secured by a chain Seal for rear wall: with rubber seal in the lower area, extending 1,000 mm to the side Additional locking mechanism for rear wall: pneumatically double-acting Operation of the additional locking mechanism: manually via control on the side of the instrument panel Steel crossbars in trapezoidal design, foldable Number and positio

Condition: new, Year of construction: 2026, HOLZING RLA X3 VIBER Power 26.900 m3/h with sawdust screw feeder (rotary sluice, auger) Capacity ~ 26.900 m3/h Dimensions 1920x4685x6285mm Filter type 100% polyester, 5 microns Buffer tank capacity 8.53 m³ Filter size Ø160mm L:1680mm Number of filters 144 Filter area 123.84 m2 Filter thickness 1 mm Pressure chamber yes 0.75 kw worm reducer Rotary valve 0.75 sq 0.17 kw vibration motor Rotation speed 3000 rpm Power 40KM Gsdpfelk Dtnjx Afuebu Number of turbines 2 Transport dimensions (length/width/height) 10/2.5/2.7 m Weight: extraction + 2 turbines 3100 kg

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, overall weight: 730 kg, load capacity: 14 kg, arm reach: 1,000 mm, repeat accuracy: 0.03 mm, TECHNICAL DETAILS Load capacity: 14 kg Maximum reach between axis 1 and axis 6: 1,000 mm Repeatability according to ISO 9283: ± 0.03 mm Rotary unit Maximum rotation angle: 350° Safe positions: 0° / ± 90° / 180° Drive unit Maximum rotation speed: 16.8 °/s Maximum travel speed: 0.6 m/s Platform positioning accuracy: ± 10 mm / 1° Drive type: Differential drive Navigation: based on laser scanner data Average surface pressure on the ground: max. 10 N/mm² MACHINE DETAILS Wrist protection class: IP67 Arm protection class: IP65 Total system protection class: IP20 Battery capacity: 5.8–8.7 kWh Compressed air tank: 0.75 l Compressed air pressure: 7 bar Gjdpfx Aoz Im S Rsfuebu Power supply: 1 × 230 V / 16 A Dimensions & Weight Dimensions without robot arm (W x H x D): 890 × 1,120 × 1,000 mm Weight: 730 kg Interfaces: WLAN, LAN, Fieldbus Multi-coupling: Compressed air, power supply, 2 × Cat5e, 26 × 1 mm² contacts EQUIPMENT Storage station for 4 tools Tool changing system MPS032 3 laser scanners with 360° monitoring range Height of the personnel-safe scanning plane: 150 mm 4 LED units Storage space for up to 16 audio files

Condition: new, Year of construction: 2026, Capacity 8,900 m³/h Gbedpfoz I Scuox Afusu Motor power 7.5 kW (10 HP), 3,000 rpm Air velocity 32 m/s Filter dimensions Ø160 x 940 mm Number of filters 42 units Filtration area 21 m² Chip collection Big bag (1,250 liters) Inlet diameter Ø300 mm Dimensions 1,210 x 2,550 x 3,520 mm Weight 540 kg Operating temperature -20°C to 40°C

Condition: new, Year of construction: 2026, Technical specifications: • Conforms to H-2 standard • Extraction capacity ~ 8900 m3/h Gsdpfed H Rdvjx Afuebu • Motor power 7.5 kW • Speed 3000 rpm • Voltage 400V, 50Hz • Suction connection 300/200 mm • Speed 28m/sec. • Number of filters 45 • Dimensions 921 x 2342 x 2304 mm • Weight 500kg • Category of filters G • Polyester filter material • Noise 80 dB without connection, 65 dB when connected to the machine via a pipe • Filter area 22 m2 Delivery: - Fulfill H-2 Norms - 5 micron polyester filter - Fire extinguisher - 2 containers - Running gear - Filter cleaning using a controlled vibration system + 850 euros for the models with fire extinguisher (Safe System) + 850 euros for the models with inverter (speed control)

Condition: used, axle configuration: 3 axles, first registration: 09/2013, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2013, Axle configuration Tire size: 385/65 R22.5 Axle brand: SAF Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Lift axle; tire tread depth left: 10 mm; tire tread depth right: 10 mm Rear axle 2: Tire tread depth left: 7 mm; tire tread depth right: 8 mm Gjdpfx Afsz Hukxeuebu Rear axle 3: Tire tread depth left: 5 mm; tire tread depth right: 6 mm Weights Unladen weight: 5,340 kg Payload: 32,660 kg GVW: 38,000 kg Condition Damage: none

Condition: ready for operation (used), Year of construction: 2020, machine/vehicle number: C124207, functionality: fully functional, power: 6.5 kW (8.84 HP), input voltage: 400 V, input current: 10 A, input frequency: 50 Hz, type of input current: three-phase, overall weight: 1,700 kg, Equipment: CE marking, BAZ: Gbedoz Iyb Eopfx Afueu Emmegi BAZ Centro Di Lavoro Phantomatic M3 (C124207), manufactured in 2020 Technical data: Weight 1,700 kg, compressed air 6–8 bar, 6.5 kW, 10 A, 400/3 V, 50 Hz. BAZ with screen/control unit. 3+1-axis machining center for aluminum, PVC, and steel profiles. 2 clamps. Location: Nuremberg/Krottenbach Inspection/test run: by appointment VAT: shown separately

Condition: used, maximum load weight: 30,140 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2014, next inspection (TÜV): 07/2026, loading space length: 10,500 mm, loading space width: 2,500 mm, loading space height: 2,200 mm, loading space volume: 53 m³, Year of construction: 2014, Equipment: ABS, Well-maintained aluminum box body, Stas S300CX, for grain transport. Features: Godpfx Afozmdbpeuebu Lift axle Platform at the front wall Roll-up tarpaulin Grain sack Grain slide Combination rear door with 1/3 and 2/3 opening Foldable rear underrun protection Lateral underrun protection Toolbox For questions regarding the equipment, please call. Errors and prior sale excepted!

Condition: new, The Holzprofi CNC machine offers working dimensions of 900x600x200mm, a solid cast iron frame and a mechanically welded sheet metal frame. This CNC machine allows you to cut, shape and engrave various materials as well as produce intricate designs and patterns precisely and efficiently. CE compliant, depth probe included. Advantages and features: -Large work surface for many applications, even for larger workpieces - Compatible with many drawing programs thanks to G-Code integration - Made from special steel, it ensures maximum strength and longevity and is suitable for use in all weather conditions - DSP control box guarantees efficient and safe operation - High durability thanks to solid design with cast table and mechanically welded sheet metal frame Technical data: Working dimensions (L x W x H): 900x600x200mm Gjdpfx Afsvrv Ayjujbu Cast iron frame: 1230x730x100mm Working height without legs: 750mm Motor: 2.2kW/3CV/230V spindle driven by frequency converter Stepper Motor: Nema 34 stepper motors for X, Y, Z and A axes Drive: The X, Y and Z axes are driven by 2505 ball screws Control: DSP type control box A-axis mandrel Ø: 100mm A-axis distance: 800mm Guide rail: 20x20mm ground stainless guide rail for ball supports Clamping option: ER20 clamp with Ø3, 6 and 12.7mm socket Base area: 1400x1180x1600mm Packaging dimensions: 1550x1235x1590mm Weight: 320kg

Condition: used, axle configuration: 3 axles, first registration: 05/2012, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2012, Axle configuration Tire size: 385/65 R22.5 Axle brand: Mercedes-Benz Brakes: Disc brakes Suspension: Air suspension Gbodozxmnispfx Afuou Rear axle 1: Lift axle; tire tread depth left: 8 mm; tire tread depth right: 5 mm Rear axle 2: Tire tread depth left: 7 mm; tire tread depth right: 7 mm Rear axle 3: Tire tread depth left: 10 mm; tire tread depth right: 10 mm Weights Unladen weight: 5,890 kg Payload: 32,110 kg GVW: 38,000 kg Condition Damage: None

Condition: used, overall weight: 36,000 kg, first registration: 12/2022, next inspection (TÜV): 02/2027, loading space volume: 91 m³, Year of construction: 2022, Equipment: ABS, bioSTAR 91 cbm/8 mm floor/forklift compatible/steel rims Internal length of the body: 13500 MM Internal width of the body: 2475 MM Internal height of the body: 2650/2825 MM Volume of the body: 91 cbm Wheelbase: 1310 MM Saddle height: 1150 MM TECHNICAL DESCRIPTION 1. FRAME SUBFRAME: High-quality construction made of steel S355JR (= ST52.3). Chassis not painted, but galvanized (EN ISO 1461), hot-dip galvanization. SADDLE HEIGHT: The exact saddle height is 1150mm. AXLES: Tridem: Manufacturer: JOST (EX-MERCEDES) = MANUFACTURER'S CHOICE. Capacity: 3 x 9 tons. Suspension: Original JOST air suspension. Brakes: Large disc - Offset: ET 120. BVA: with BRAKE WEAR INDICATOR (BVA) connection. The first and third axles are automatic lift axles (automatic lifting when unladen, automatic lowering when loaded). The lift axles are controlled via the EBS-E system. Both axles lift independently. The starting aid is activated when a button is pressed in the truck (truck equipment not included). AIR SUSPENSION: Lifting and lowering device. Aluminum air tank. 6 x 385/65 R 22.5 tires for regional transport on steel rims. ET 120. SADDLE SUPPORTS: WEWELER with leveling supports for air-sprung vehicles. Mechanical version with single-sided operation and 2 speed levels. BRAKE SYSTEM - EBS: EBS-E system WABCO 2S/2M - PREMIUM MODULATOR. 2-circuit compressed air brake system according to CE directives. Spring-loaded parking brake acting on 2 axles. With SMARTBOARD. R.S.S. (Roll Stability System). LIGHTING: ASPÖCK 24-volt electrical system. 2 x 7-pin + 1 x 15-pin sockets, ISO connection. Aspöck kit. Orange LED lighting is mounted on the side of the trailer. Without distribution box at the rear - NORDIC. REAR LIGHTING IN THE UNDER RIDE GUARD: The lighting is mounted in the fixed aluminum under ride guard. With aluminum lighting protection (foldable). 2 x 1 five-chamber light - EUROPOINT III - LED version. WORK LIGHTS ON THE FRAME: 2 x LED WORKPOINT work lights in front of the axles and 2 x behind the axles - with switch on the control console. HYDRAULIC SYSTEM: Edbro hydraulic system: Pressure: 1 female. TYPE ARGUS HDK. Return line: 1 female, TYPE ARGUS HDK DA VINCI 29227. HYDRAULIC HOSES: Hydraulic hoses 3/4 - 1, length 3,000 mm. HYDRAULIC POSITION: Connection on the front wall. With an additional connection option below the body in front of the supports. ACCESSORIES: 3 holders for broom, shovel and scraper Aluminum ladder (3.7 m) With air connection mounted in the toolbox. Retractable ladder integrated at the rear of the vehicle, on the right side. With pneumatic central locking. With TÜV certificate for load securing. With standard side impact protection. Toolbox PVC. POSITION CONTROL CONSOLE + HYDR. SYSTEM BOX: The control console is mounted in front of the axles on the left side. The box for operating the system from the ground is also mounted in front of the axles on the left side. Gbodpfjz Nuhksx Afuou FENDER: 6 plastic single-wheel fenders. 2 Clear Pass splash guards are permanently mounted on the plastic fenders. SPLASH GUARD: A retractable splash guard (black - EBB) over the entire width of the under ride guard. WHEEL CHOCKS: With two plastic wheel chocks with holder. 2. DUMP BODY FRONT WALL: The front wall consists of strong aluminum plank profiles. COVERING INSIDE BETWEEN FLOOR-FRONT WALL: Fixed sealing between floor and front wall by means of aluminum profile and PVC sealing. SIDE WALLS: Side walls in smooth design inside and outside. Double-walled s

Condition: used, functionality: fully functional, axle configuration: > 3 axles, first registration: 05/2021, tire condition: 60 %, color: light grey, Year of construction: 2021, Universal gate / Steel chassis / HARDOX body CRAMARO tarpaulin / Pneumatic tires Aluminum rims 26 m3 Gsdpoznkv Nefx Afuebu

Condition: used, axle configuration: 3 axles, first registration: 09/2008, suspension: air, tire size: 385/65 R22.5, color: other, Year of construction: 2008, Axle configuration Tire size: 385/65 R22.5 Axle brand: Mercedes-Benz Brakes: Disc brakes Suspension: Air suspension Rear axle 1: Aluminum rims; Lift axle; Tire tread depth left: 6 mm; Tire tread depth right: 6 mm Rear axle 2: Aluminum rims; Tire tread depth left: 4 mm; Tire tread depth right: 8 mm Gbsdpfozgmazox Afueu Rear axle 3: Aluminum rims; Tire tread depth left: 7 mm; Tire tread depth right: 7 mm Weights Unladen weight: 4,890 kg Payload: 33,110 kg GVW: 38,000 kg Condition Damage: None

Condition: used, Year of construction: 2005, Injection molding machine Manufacturer: Krauss Maffei Type: KM350 /1900 C2 Year of construction: 2005 Clamping force: 3,500 kN Tool opening force: 220 kN Drive force of movable platen: opening: 105 kN closing: 95 kN Platen size (h x v): 1,060 x 1,095 mm Clear opening (h x v): 710 x 710 mm Tool opening stroke: 920 mm Minimum tool mounting height: 380 mm Opening width: 1,300 mm Ejector stroke: 250 mm Ejector force front/rear: 95 / 48 kN Pump motor: 75 kW Installed heating capacity: 30 kW Control zones for cylinder heating: 6 Dry cycle rate: 1,550 1/h Oil capacity: 720 l Dimensions and weights: Net weight with control cabinet: approx. 16.0 tons L/W/H: 6,510 x 2,040 x 2,380 mm Maximum tool weight: 4,780 kg Injection unit: Working capacity: 1900 Screw diameter: 70 mm Injection pressure: 1,778 bar Displacement: 1,047 cm3 Shot weight for PS: 953 g Injection rate: 527 cm3/s Screw speed standard / option: 1/min 285/349 Screw speed standard or stage 1: 95 PS Screw speed option or stage 2: 117 PS Nozzle system force: 82 kN Fully hydraulic 2-platen clamping system PV control for injection unit MC4 32-bit microprocessor control Integrated control panel with TFT color screen and Floppy disk drive (3.5 inch) for data backup Plasticizing: 1 complete thermoplastic plasticizing unit in wear-resistant design, screw diameter 70 mm with backflow preventer and open nozzle Nozzle radius: 15.00 mm Nozzle bore: 6.00 mm 121026 Godpfx Aexu Uvaofusbu

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 01/2017, next inspection (TÜV): 09/2026, loading space length: 13,179 mm, loading space width: 2,500 mm, loading space height: 2,800 mm, Equipment: ABS, * Stas walking floor trailer * Tarp cover Gedpfx Aexu Th Uofuobu * Alloy wheels * SAF axles * Unladen weight: 7,790 kg * Year of manufacture: Internal vehicle number: 11498-----Errors and prior sale reserved.

Condition: used, maximum load weight: 34,422 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2024, next inspection (TÜV): 01/2027, loading space length: 10,149 mm, loading space width: 2,400 mm, loading space height: 2,285 mm, loading space volume: 55 m³, total length: 11,521 mm, total width: 2,550 mm, total height: 3,672 mm, Year of construction: 2024, Equipment: ABS, STAS 3-axle HardoX steel tipper, 55 cbm, "X-Shape" design First registered 01/2024, from first owner Delivered in Germany Mileage: 243,148 km Dimensions (L x W x H): 10,149 x 2,320/2,450 x 2,285 mm (tapered design in width) Unladen weight: only 7,578 kg Z-chassis, curved design Floor made of continuous 4 mm HardoX steel HB450 Front and side walls made of 3 mm HardoX steel HB450 Sloping front wall, with internal access steps 2-wing portal doors with PENDULUM FUNCTION/combination doors, pneumatic automatic release 2 grain slides with dust protection cover Reinforced roof cover HYVA tilting cylinder, Alpha type, suitable for high and low pressure ALU fifth wheel, full load capacity 2 air vibrators below the body SAF axles with large disc brakes, 430 mm 1st axle: LIFT AXLE with starting aid WABCO trailer EBS with roll-over protection RSS WABCO Smartboard Automatic tipping lowering Lifting and lowering mechanism Godpoz I Hr Rofx Afusbu Tires: 385/65 R 22.5 ALCOA aluminum rims, Dura-Bright, high-gloss finish Aluminum access ladder Shovel and broom holder Toolbox on the right 4 LED reversing lights RENTING is the new BUYING; with us, it is also immediately available in a FULL-SERVICE rental package.

Condition: used, axle configuration: 3 axles, first registration: 09/2009, suspension: air, Year of construction: 2009, Equipment: ABS, = Additional options and accessories = - EBS - Rear doors - Air suspension = Additional information = Suspension: Air suspension Unladen weight: 6,315 kg Payload: 32,685 kg GVWR: 39,000 kg Tipping: Rear Vehicle number: Tipping semi-trailer: 16 Stas S339CX / Thermo, full aluminum / 28 m³ .: YE6S339CX90000429 F.1 Technically permissible total weight in kg: 39,000 G Unladen weight: 6,315 kg Full aluminum 28 m³ No liability for printing and typographical errors, changes, prior sale and errors! = Company information = No liability for printing and typographical errors, changes, prior sale and errors! Al Shogran GmbH An der Glashütte 15 41516 Grevenbroich Tel.: Gbedpfxjzwwqro Afuou Mobile: Ms. Sabine Faust Email:

Condition: used, Screw jack, linear drive, linear gear, lifting gear, screw jack, spindle drive, electric actuator, valve drive, actuator, servomotor, screw jack, lifting drive -Spindle lifting gear: from double mitre saw elumatec DG 204 -Manufacturer gearbox: Atlanta, type 539 05 040 i 4 -Engine manufacturer: SEM, type DPM30E4 36 V 0.18 kW -Dimensions: 450/320/H130mm Gbjdpfjttnt Ijx Afueu -Weight: 9.5 kg