Used Technopack Clippeuse Tipper Tie Kdc Vt 4 for sale (61,156)

Condition: used, mileage: 1,000,000 km, power: 382 kW (519.37 HP), first registration: 05/2016, fuel type: diesel, overall weight: 320,000 kg, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, loading space length: 6,056 mm, loading space width: 2,457 mm, loading space height: 1,811 mm, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Manufacturer Scania Model R500 8x2/4 Euro 6 Tipper / Kipper / EcoTop Year 2016 Condition Good Serial Number YS2R8X20005425457 Ref. nr. 1078070 Reg. date: Last seen: 16-05-2025 Engine: DC16 Hk: 520 Km: 1.000.000 Gearbox: Opticruise (GRS905) Eurotype: 6 Diesel tank: 1 Tank liter: 200 L Rear view camera: ? Gsdpfx Aloy Ikifsxjit Cabin heater: ? Air conditioning: ? Leather seats: ? Radio: ? Refrigerator: ? Walkie: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 385/65R22,5 - 315/80R22,5 Cover% left 60% 60% 30% 30% Front suspension: Air Suspension rear: Air Wheelbase: 4700 mm Toolbox: ? Hydraulic system: ? Total weight: 32000 Kg Net weight: 16570 Kg Load capacity 15430 Kg Inside length: 6056 mm Internal width: 2457 mm Interior height: 1811 mm 3 way: ? EcoTop: ?

Condition: good (used), mileage: 575,156 km, power: 368 kW (500.34 HP), first registration: 12/2017, fuel type: diesel, tire size: 385/65R22.5, axle configuration: 6x2, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 11,500 kg, permissible axle load (axle 3): 7,500 kg, Year of construction: 2017, Equipment: AdBlue, air conditioning, central locking, cruise control, electric window regulation, onboard computer, parking heater, retarder, tail-lift, = Additional options and equipment = - Aluminum fuel tank - Rear work lights - Front work lights - Windscreen - Cabin - Auxiliary heater - Warm-up automatic (pre-heater) - Power take-off (PTO) = Remarks = Scania R500 6x2 – Food tipper with 4 compartments – Tail lift – Compressor – Retarder – Full air suspension MY: 22-12-2017 KM: 575,156 YS2R6X20002141681 Food tipper – 4 compartments Compressor Tail lift Retarder Full air suspension = Additional information = Gjdpfjyl Iwgex Alxsit Technical data Number of cylinders: 6 Gross vehicle weight (GVW): 27,000 kg Transmission Transmission: Opti Cruise, 12-speed, automatic Axle configuration Suspension: Air suspension Front axle: Tire size: 385/65R22.5; Max. axle load: 8,000 kg; Steering; Tire tread left: 40%; Tire tread right: 40% Rear axle 1: Tire size: 315/80R22.5; Twin tires; Max. axle load: 11,500 kg; Tire tread left inner: 40%; Tire tread left outer: 40%; Tire tread right inner: 40%; Tire tread right outer: 40% Rear axle 2: Tire size: 385/65R22.5; Max. axle load: 7,500 kg; Tire tread left: 40%; Tire tread right: 40% Functional Tail lift: Rear platform Tipper: Rear tipping Condition Technical condition: good Visual condition: good Further information Please contact VAEX The Truck Traders for more information.

Condition: reconditioned (used), tie-bar-set (4) complete for DEMAG ET 330 Giodpfxsfwctas Alxet

Condition: excellent (used), mileage: 147,161 km, power: 96 kW (130.52 HP), first registration: 11/2011, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: white, gearing type: mechanical, number of gears: 6, emission class: euro4, total length: 3,150 mm, total width: 1,820 mm, total height: 400 mm, Year of construction: 2011, Equipment: ABS, electric window regulation, = Additional options and accessories = - Leaf spring - Power take-off (PTO) - PTO - Radio/CD player = Remarks = VWASHTF24B2127094 = More information = Front axle: Steering Tipper: Back Technical condition: very good Visual appearance: very good Godpfx Asymqkfjlxsit = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: used, Year of construction: 2017, x-axis 332 mm z-axis 625 mm control Fanuc Vertical Turning Machine | EMAG - VT 2-4 Gjdpfx Asyy A Nbslxjit The machines are in very good condition and can be inspected under power. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VT2-4 | VT 2 4 | VT2 4

Condition: used, mileage: 727,000 km, power: 368 kW (500.34 HP), first registration: 07/2014, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, gearing type: automatic, emission class: euro6, Year of construction: 2014, Equipment: ABS, air conditioning, crane, Manufacturer Volvo Model FM500 8x4?4 HMF 2620 K-5 Year 2014 Condition Good Serial Number YV2XT40G9EA759926 Ref. nr. 937860 Reg. date: 17-07-2014 Engine: D13 Hk: 500 Km: 727000 Gearbox: I-shift Eurotype: 6 Diesel tank: 1 Gedpfowppcmox Alxoit Tank liter: 400 Air conditioning: ? Radio: ? Disc brake: ? ABS: ? Tire Size: 385/65 - 315/80 - 315/80 - 385/65 Cover% left 60 - 60 - 50 - 10% Front suspension: Air Suspension rear: Air Wheelbase: 3700 mm Toolbox: ? Hydraulic system: ? Total weight: 32000 kg. Manufacturer: HMF Wire hoist: ? Crane Make: HMF 2620-K5 Year: 2014 Tonsmeter: 26 Procrastination: 5 Remote control: ?

Condition: new, power: 294 kW (399.73 HP), fuel type: diesel, tire size: 385/65R22.5, axle configuration: 8x4, wheelbase: 2,980 mm, fuel: diesel, driver cabin: day cab, gearing type: automatic, emission class: euro2, suspension: steel, loading space volume: 20 m³, Year of construction: 2022, Equipment: air conditioning, = Additional Options and Accessories = - Leaf suspension = Remarks = Body type: Tipper Model year: 2023 = Company Information = Godpfsvpqc Asx Alxjit Van Vliet Automotive Trading - Your Truck Partner A wide selection of new trucks, trailers, 4x4 vehicles, and machinery. Ready for immediate deployment! Our own (engineering) workshops, modification center, and paint shop ensure a quick and project-specific handling of your order, anywhere in the world. ISO and AEO certified. Logistics processing and customs/export facilities. Worldwide spare parts service. International team of mechanics and trainers, available globally on-site to provide technical support and training. Contact our experienced, multilingual customer service team now for professional, project-specific, and competitive advice. = Further Information = Transmission: TipMatic 12.28OD, automatic Year of manufacture: 2022 Model year: 2023 Suspension: Leaf suspension Front axle 1: Tire size: 385/65R22.5 Front axle 2: Tire size: 385/65R22.5 Rear axle 1: Tire size: 315/80R22.5 Rear axle 2: Tire size: 315/80R22.5 = Company Information = WE PROVIDE, YOU ACCELERATE Without boundaries Van Vliet is the official importer for MAN Truck & Bus SE in several African countries. Supported by comprehensive after-sales services, including parts supply and (local) training programs. WE PROVIDE, YOU ACCELERATE Without boundaries Van Vliet is the official MAN Truck & Bus SE importer for several African countries. Supported with careful after sales services, such as supplying parts and providing (local) trainings.

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, TipperTie double clipper Model: KDMCA 70 Caliber: 25 - 75 mm, also suitable for ring-shaped products (thread dispenser) Accessories: 1x nozzle 1x brake 1x filling cable 150,000x Clips E 220 T Gedpfxey Eq Aqe Alxoit Shipping possible

Condition: excellent (used), For sale: Becker VT 4.40 vacuum pump – a high-quality unit from the renowned German manufacturer Becker. This pump is ideal for industrial applications, CNC machinery, vacuum packaging, and automation systems. ⚙️ Technical data: Manufacturer: Becker Model: VT 4.40 Year of manufacture: 2009 Capacity: 40 / 48 m³/h Power: 1.25 / 1.50 kW Speed: 1420 / 1700 rpm Frequency: 50 / 60 Hz Max. vacuum: 150 mbar Country of origin: Germany 🛠️ Features: Dry-running (oil-free) vacuum pump Quiet and efficient operation Compact design Low operating costs Gijdpsyz Dy Djfx Alxot Very popular industrial model 📦 Condition: ✔️ Used ✔️ Very good visual condition ✔️ Normal signs of use ✔️ Ready for operation 📌 Applications: CNC machinery Vacuum packaging Wood industry Automation Suction systems 📦 Included: Becker VT 4.40 pump As shown in the pictures Weight: 39kg 🚚 Shipping: Courier or pallet shipping available Personal collection also possible We assist with transport organization

Condition: excellent (used), I offer a professional vacuum pump from the renowned German manufacturer Becker, model VT 4.40. This device is designed for industrial use and is characterized by high reliability and maintenance-free operation. The pump features oil-free (dry-running) technology, which means it does not require oil and minimizes operating costs. Ideal for applications where cleanliness and stable vacuum are required. The visual condition is very good. The device is complete. Technical data: Manufacturer: Becker, Germany Model: VT 4.40 Year of manufacture: 2007 Capacity: approx. 40 m3/h at 50 Hz Vacuum: up to approx. 150 mbar absolute Motor power: approx. 1.25 kW Power supply: three-phase Speed: approx. 1420–1700 rpm Weight: approx. 38–40 kg Gsdpfxoyxgt Is Alxjit Applications: CNC machines and vacuum tables vacuum packaging wood industry printing and graphic arts material handling Advantages: oil-free operation – no oil service required quiet and stable performance robust industrial construction long vane life Made in Germany

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Gsdpfod Tbbdox Alxjit Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. Gijdpfefdkb Tox Alxjt According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. Gsdpod Tqaljfx Alxjit The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface Gijdpefdkb Uofx Alxjt - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights. Gjdpfx Aleguk A Hsxjit

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports. Gedpsfdkbhjfx Alxsit

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Godpfx Aeguk Dkelxoit Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) Gjdpfx Aleguk Dvoxsit - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), The scope of delivery includes: 1x Depth bar, used Material color: raw Total length: approx. 1,110 mm Inner length: approx. 1,102 mm for stand depth: approx. 1,100 mm Clear span: approx. 1,000 mm Profile dimensions: K 140 x 60 x 4 mm Crossbeam support: approx. 52 mm Unit weight: approx. 7.10 kg Gedpfx Alowl Ncfjxeit Your contact persons in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately from us depending on the delivery location and scope of delivery.

Condition: good (used), Scope of delivery includes: 01x deep beam, used Material color: RAL 5001 blue Total length: approx. 1,112 mm Inner length: approx. 1,103 mm for frame depth: approx. 1,100 mm clear support span: approx. 999 mm Profile dimensions: K 50 x 50 x 4 mm Beam support width: approx. 53 mm Gedpswwviiofx Alxsit Unit weight: approx. 2.52 kg Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any transport or shipping beyond this is associated with additional costs, which can be requested from us separately depending on the delivery location or scope of delivery.

Condition: good (used), The scope of delivery includes: 1x Depth bar, used Material color: raw Total length: approx. 1,110 mm Inner length: approx. 1,102 mm for stud depth: approx. 1,100 mm Clear span: approx. 1,000 mm Profile dimensions: K 100 x 50 x 4 mm Crossbeam support: approx. 52 mm Unit weight: approx. 5.42 kg Your contact persons in our company: Mr. Andre Evening Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Gisdpfx Aswl Ullslxst This item is available for pickup only. Any additional transport or shipping of this item is subject to additional costs, which can be requested separately from us depending on the delivery location or scope of delivery.

Condition: good (used), Scope of delivery includes: Giedpfx Alewwuchoxet 01x deep beam, used Material colour: black Total length: approx. 1,111 mm Internal length: approx. 1,103 mm for upright depth: approx. 1,100 mm Clear support width: approx. 1,000 mm Profile dimensions: K 140 x 50 x 4 mm Cross member bearing: approx. 52 mm Unit weight: approx. 7.26 kg Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. If transport or shipping is required, additional costs will apply; these can be requested from us separately depending on delivery location or scope of supply.

Condition: excellent (used), revolving point, revolving center point, revolving Morse taper, revolving center point, revolving lathe point, center point Gjdjhb Ug Nopfx Alxoit -Manufacturer: Stieber % Nebelmeier, revolving center point with adapter set unused -Types: RKN 3 DM 4-22 -Recording: MK3 / MK4 -Price / fee: complete -Dimension box: 270/180 / H65 mm -Weight: 3 kg

Condition: like new (used), Clipping machine Giedpfx Alsxtn Dbjxet Manufacturer: Technopack Tipper Tie Made of stainless steel and durable industrial plastic Easy to clean thanks to smooth surfaces Machine dimensions: Width: 100 cm Depth: 78 cm Height: 180 cm Power: 0.1 kW Voltage: 2.5 A Compressed air: 4–6 bar / 0.4–0.6 MPa

Condition: ready for operation (used), Clipper Technopack Giedpfsrvgt Iox Alxjt Type: KDCV 70 Power: 0.1 kW Dimensions: 1250 x 600 x 1850 mm Weight: 118 kg For all covers Plastic, fibrous, collagen and natural Mobile machine on a trolley In set funnel 22 mm Stock quantity: 1 Condition: Used