Used Techtop Pumping Set for sale (17,062)

Condition: good (used), Wilo DL-E 100/145-11/2-S1 Dry-running twin pump Dry-running twin pump in an inline design for pipe installation or foundation mounting with an integrated frequency converter for electronic control, including constant or variable differential pressure (Δp-c/Δp-v). Design Electronically controlled dry-running twin pump in an inline design with flange connection and automatic power adjustment. Application Pumping of heating water (according to VDI 2035), cold water, and water-glycol mixtures without abrasive substances in heating, cold water, and cooling systems. Equipment/Function Operating modes Δp-c for constant differential pressure Δp-v for variable differential pressure PID control Controller operation (n=constant) Manual operating mode Setting of the differential pressure setpoint Setting of the speed (manual operating mode) Setting of the operating mode Setting pump ON/OFF Configuration of all operating parameters Fault acknowledgment External control functions Control input "Priority OFF" Control input "External pump switchover" (only effective in twin pump operation) Analog input 0-10 V, 0-20 mA for controller operation (DDC) and remote setpoint adjustment Analog input 2-10 V, 4-20 mA for controller operation (DDC) and remote setpoint adjustment Analog input 0-10 V for actual value signal from the pressure sensor Analog input 2-10 V, 0-20 mA, 4-20 mA for actual value signal from the pressure sensor Alarm and display functions Collective fault message SSM Collective operating message SBM Data exchange Infrared interface for wireless data exchange with IR monitor/IR stick Slot for Wilo IF modules (Modbus, BACnet, CAN, PLR, LON) for connection to building automation Safety functions Full motor protection with integrated tripping electronics Access restriction Twin pump management (twin pump or 2 x single pump) Gsdpewbqrtefx Acaeuh Main/reserve operation (automatic fault switchover) Main/reserve operation, pump switchover after 24 hours Addition operation Addition operation (efficiency-optimized peak load switching on and off) Your advantages Energy saving through integrated electronic power adjustment Easy operation thanks to Green Button technology and display Various operating modes: main/reserve operation and parallel operation Configurable fault behavior tailored to heating and air conditioning applications Integrated full motor protection (FMP) with tripping electronics Drive Mains connection 3~380 V, 50/60 Hz 3~400 V, 50/60 Hz 3~440 V, 50/60 Hz Motor efficiency class: IE4 Power consumption P1 max: 13000 W Motor rated power P2: 11 kW Current (max) Imax: 21 A Speed max. nmax: 2970 1/min Emitted interference EN 61800-3 Immunity to interference EN 61800-3 Insulation class: F Motor protection class: IP55 Motor protection: FMP integrated Installation dimensions Installation length L0 500 mm Suction-side pipe connection DNs DN 100 Pressure-side pipe connection DNd DN 100 RRP: €29,006.25 More new and used items can be found in our shop! International shipping costs on request!

Operating hours: 392 h, condition: used, Cogem engine-driven pump set 3''    • Maximum capacity 70 m3/h    • 125-liter tank    • Electric start    • Complete with suction hose Condition: Used Year of manufacture: 0 Guodsz Rw Nmspfx Acaoh

Condition: used, This listing is for a 1 of 2 Charles Austin Capex 8C Diaphram Pump. The unit is in full working condition and is ready for immediate release. The Charles Austin Capex 8C is a highly efficient diaphragm pump designed to deliver a clean, oil-free vacuum and pressure source tailored for laboratory benchtop use. With its durable alloy casing and advanced engineering, the Capex 8C sets a new standard in versatile laboratory vacuum and pressure solutions. Features: - Oil-Free Operation: Ensures a clean environment, making it suitable for sensitive applications like microbiology and IVF treatments. - Quiet Running: Designed for low noise levels, ideal for use in laboratories without disrupting ongoing work. - Compliant with IEC 1010: Meets electrical safety standards, ensuring safe operation in laboratory settings. - Versatile Applications: Perfect for vacuum and pressure-assisted filtration, residue analysis, gas monitoring, and evacuating rotary evaporators or desiccators. - Lightweight Design: Easy to transport and reposition, enhancing usability across different workstations in a lab. Key Specifications: - Maximum Flow Rate: 8 L/min - Vacuum Level: 240 mbar (excellent for sensitive applications) - Pressure Capability: 200 kPa - Motor Type: Shaded pole motor for quiet and efficient operation - Dimensions: 282 mm (W) x 214 mm (D) x 137 mm (H) - Weight: 3.75 kg (lightweight and portable) Multipurpose Applications: - Microbiology Experiments: Ideal for creating a sterile environment during sample handling. Gusdpfx Acjxxx U Ieajh - Embalming Procedures: Provides reliable pressure and vacuum for fluid transfer. - IVF Treatment: Ensures a clean, controlled environment for sensitive biological processes. - Waterjet Pump Replacement: A reliable alternative for general laboratory duties. - Aspiration and Filtration: Effective for removing particles and contaminants from samples. - Beauty Therapy: Used for vacuum treatments in cosmetic procedures.

Condition: used, This listing is for a Biotek Instruments Vacuum pump 2 The unit is in full working condition and is ready for immediate release. BioTek Instruments GAST Vacuum Pump 7103034 Overview The BioTek Instruments GAST Vacuum Pump 7103034 is a high-performance, oil-less rocking piston compressor and vacuum pump designed for use with a variety of microplate washers, including the EL 406, 405 TS, 405 LS, and ELx405. Key Features Standard Vacuum Pump: Ideal for a wide range of applications. Oil-less Rocking Piston Compressor: Ensures outstanding performance and durability. Flexibility and Durability: Suitable for various laboratory settings. Easy to Retrofit: Simple installation and integration with existing systems. Low Exhaust Temperatures: Reduces the risk of overheating and extends the pump's lifespan. Longer Life Span: Built to last, minimizing the need for frequent replacements. Voltage: Operates at 115-230V. Max Vacuum: 26 in -hg. Sound Level: Less than 65 db(A). Product Information Compressor Type: Standard Vacuum Pump Port Size: 1/4 in NPT End Connections: NPT Phase: Single Maximum RPM: 1725 RPM; 1425 RPM Minimum Working Temperature: 5°C Maximum Working Temperature: 40°C Standards: CE; UL For Use With: 405 ls, 405 touch, el406, elx405 microplate washers Voltage: 115 - 230V Sound Level: Less than 65 db(A) Max Vacuum: 26 in -hg Specifications Guodpfx Aexwc I Njcaeh Weight Metric: 11.34 kg Imperial: 25 lb Dimensions Metric: 35.56 cm x 25.4 cm x 33.02 cm Imperial: 14 in x 10 in x 13 in Harmonized Code: 84141000 Harmonized Code Details: Vacuum pumps; liquid ring vacuum pumps and other rotary positive displacement pumps Availability eBay: This vacuum pump is listed on eBay with free shipping for many products. Sellers typically respond within 24 hours to assist with any inquiries or specific configurations.

Condition: used, This listing is for the Watson-Marlow 520Di Dispensing Pump The unit is in full working condition and is ready for immediate use Overview The 520Di is a high-precision, programmable peristaltic dispensing pump designed for aseptic fluid transfer and filling in pharmaceutical, biotech, and food processing environments. With a simple keypad-screen interface and up to 50 programmable batch routines, it meets cGMP documentation needs while delivering fast and accurate fluid dispensing. Dispenses 50 mL in 2 seconds with ±0.5% accuracy Pumps up to 3.5 L/min, pressures up to 2 bar Batch record output for regulatory compliance 5-year warranty Enclosure options: IP31 (NEMA2) and IP66 (NEMA4X) Control User Interface: Tactile membrane keypad + alphanumeric LCD Security: Optional passcodes to lock settings Program Storage: Save 50 custom fill/dispense sequences Digital I/O: 4 configurable outputs Remote Operation: Contact closure or logic input control Guedpfx Aoxv Da Rjcaeh Documentation Full operating manuals Validation support documents (cGMP, IQ/OQ protocols) Maintenance and calibration guides Sectors & Applications Pharmaceutical & Biotech: Aseptic fill/finish, cell culture media filling, vial/bottle dosing Food Production: Adding dyes, vitamins, flavours Laboratory R&D: Benchtop reagent prep, Petri dish filling Chemical Processing: Metering corrosive or high-viscosity fluids

Condition: used, This listing is for a Cole Parmer Masterflex L/S 7554-95 Peristaltic Pump. The unit is in full working condition and is ready for immediate release. This unit is supplied with no pump head. The Cole Parmer MasterFlex L/S 7554-95 is a high-performance peristaltic pump designed for precise and reliable fluid transfer across a range of applications in laboratory, pharmaceutical, and industrial settings. Its versatile design and robust features make it an essential tool for any fluid handling needs. Features: - Versatile Applications: Ideal for transferring a wide range of fluids, including delicate biological fluids, viscous materials, and corrosive solutions. - User-Friendly Interface: Easy-to-read digital display and intuitive controls for straightforward operation and adjustment. Gujdpfx Acexxx U Ujaoh - Durable Construction: Built for longevity with materials resistant to wear and chemical damage, ensuring reliability in demanding environments. - Quiet Operation: Designed to run quietly, making it suitable for laboratory settings without disrupting workflows. - Safety Features: Includes built-in protection against overload and dry running to extend pump life and ensure safe operation. Key Specifications: - Flow Rate: 0.6 to 3400 mL/min, adjustable based on tubing size - Speed Range: 6 to 600 RPM for precise flow control - Pumping Method: Peristaltic pumping action for gentle and accurate fluid transfer - Reversible Pumping: Supports easy priming, purging, and efficient fluid transfer - Tubing Compatibility: Compatible with a variety of tubing materials and sizes for flexibility Ideal For: - Laboratory fluid transfer, pharmaceutical production, process scaling, and industrial fluid handling.

Condition: used, This listing is for the Watson-Marlow 520Di Dispensing Pump The unit is in full working condition and is ready for immediate use The pump-head fixed to this model is a Watson-Marlow 520R2. The pump-head is configured for 2.4 mm wall-thickness tubing Overview The 520Di is a high-precision, programmable peristaltic dispensing pump designed for aseptic fluid transfer and filling in pharmaceutical, biotech, and food processing environments. With a simple keypad-screen interface and up to 50 programmable batch routines, it meets cGMP documentation needs while delivering fast and accurate fluid dispensing. Dispenses 50 mL in 2 seconds with ±0.5% accuracy Pumps up to 3.5 L/min, pressures up to 2 bar Batch record output for regulatory compliance Gsdpfx Acjxv A Akjaouh 5-year warranty Enclosure options: IP31 (NEMA2) and IP66 (NEMA4X) Control User Interface: Tactile membrane keypad + alphanumeric LCD Security: Optional passcodes to lock settings Program Storage: Save 50 custom fill/dispense sequences Digital I/O: 4 configurable outputs Remote Operation: Contact closure or logic input control Documentation Full operating manuals Validation support documents (cGMP, IQ/OQ protocols) Maintenance and calibration guides Sectors & Applications Pharmaceutical & Biotech: Aseptic fill/finish, cell culture media filling, vial/bottle dosing Food Production: Adding dyes, vitamins, flavours Laboratory R&D: Benchtop reagent prep, Petri dish filling Chemical Processing: Metering corrosive or high-viscosity fluids

Condition: used, This listing is for 1 of 2 QuattroFlow QF15PTIU Single-use Pump Diaphragm Pump. The unit is in full working condition and is ready for immediate release. The QuattroFlow QF 150 PTIU is an advanced single-use quaternary diaphragm pump tailored for biopharmaceutical applications, offering several notable features and benefits that enhance its functionality in sensitive environments. Here’s a detailed look at its specifications and advantages: Key Features and Specifications: Flow Rate: Operates within a range of 0.02 to 3.2 lpm (0.01 to 0.85 gph), making it highly adaptable for various bioprocessing tasks. Design: Utilizes a 4-piston diaphragm positive displacement system, which ensures total product containment. This design minimizes the risk of abrasion and particle shedding, crucial for maintaining product purity. Materials: Constructed from disposable machined polypropylene, the pump is designed specifically for single-use applications, significantly reducing contamination risks. Control System: Equipped with an integrated controller, allowing for automated operation and precise control over pump functions, which enhances efficiency and consistency in processes. Certifications: Complies with USP Class VI and 3.1B standards, as well as CFR FDA regulations, ensuring it meets the stringent requirements for biopharmaceutical manufacturing. Gujdpfoxxz Iwjx Acajh Applications: The QF 150 PTIU is versatile and suitable for various critical applications, such as: Filtration Systems: Ideal for use in Tangential Flow Filtration (TFF) setups, where it can efficiently process biological solutions. Chromatography Systems: Effectively manages the flow of reagents and samples during separation processes. Feeding Pumps: Provides reliable and consistent dosing in various bioprocessing applications. Virus Filtration: Plays a pivotal role in ensuring the safety of biopharmaceutical products by filtering out contaminants. Sterile Filtration: Maintains sterility in critical processing steps, essential for product integrity. Key Benefits: Total Product Containment: Ensures that no product is lost or contaminated during transfer, vital for high-value biopharmaceuticals. Low Pulsation and Low Shear Operation: These features preserve delicate biological materials and maintain their integrity throughout the pumping process. Variable Flow Rate: Allows for flexibility in operations, accommodating different process needs easily. Quiet Operation: Minimizes noise during operation, making it suitable for laboratory and clinical environments. CIP/SIP Capable: Facilitates easy cleaning and sterilization, ensuring high hygiene standards are maintained. Autoclavable: Supports sterilization processes, enhancing its usability in critical applications. Single-Use Design: Reduces maintenance requirements and downtime, allowing for efficient workflow in biopharmaceutical settings.

Condition: used, This listing is for 1 of 2 Watson Marlow 504u Mk2 Peristaltic Pumps These units are in full working condition and ready for immediate release. The Watson‑Marlow 504U is a peristaltic (tube) pump designed for dosing, dispensing, or fluid transfer in laboratory, process, and industrial settings. Because of its design, the fluid only contacts the tubing, which helps with chemical compatibility, sterility, and ease of cleaning/maintenance. It features a fairly durable, washdown‑resistant housing (IP55) in many versions, allowing it to tolerate exposure to splashing or low‑pressure water jets. A few variants (e.g., “Mk2” or “Du”) bring updates in control, enclosure, and durability Other features: Gsdpjxv Affsfx Acasuh The manual for the 504Du version describes that the pump’s speed control ratio is 220:1, giving a minimum speed of 1 rpm (for the 220 rpm drive) and 0.5 rpm (for 55 rpm version). The pump is intended to be installed on a horizontal surface with good ventilation and free airflow around it. The pump allows for remote control / automation through a 6‑pin port for auto/remote operation

Condition: used, This listing is for the Cole Parmer MasterFlex LS Pump Head 07528-10 with easy load ll pump head The unit is in full working condition and is ready for immediate release Cole-Parmer Masterflex L/S Easy-Load II Pump Head The Cole-Parmer Masterflex L/S Easy-Load II Pump Head is a high-performance peristaltic pump head designed for laboratory and industrial applications that require precise fluid handling. This updated model builds upon the original Easy-Load design, offering enhanced features for improved efficiency and ease of use. Key Features New Design and Automatic Tubing Retention: The updated design allows for easy tubing changes without removing the head from the drive. Automatic tubing retention secures the tubing without the need for manual adjustments, simplifying setup and reducing the risk of errors. Three-Roller Design: This design provides smooth and consistent flow, reducing pulsation and improving fluid transfer performance. Adjustable Occlusion: Fine-tune the occlusion to balance tubing life and pressure performance. By adjusting the "squeeze" on the tubing, users can optimize pressure, suction capabilities, and extend tubing life. Stainless Steel (SS) or Cold-Rolled Steel (CRS) Rotor/Roller: Choose between stainless steel or cold-rolled steel for increased durability and enhanced chemical resistance, catering to various operational needs. Stackable Design: The pump head is stackable for multichannel applications, and the rollers are offset by 45° to minimize pulsation when multiple pump heads are combined. Compact Design: The compact design ensures efficient use of space in laboratory or industrial setups. Multiple Tubing Sizes Compatibility: The pump head accepts various tubing sizes, including L/S 13, L/S 14, L/S 16, L/S 25, L/S 17, and L/S 18. This provides maximum flexibility for different fluid handling applications. Automatic Tubing Retention for Easy Setup: The automatic tubing retention system eliminates the need for manual adjustments, ensuring an easy setup process, improved tubing life, and better overall performance. Guedexuqh Espfx Acash Flow Rate Range The pump supports flow rates from 0.06 to 2300 mL/min, depending on tubing size and drive settings, providing flexibility for a wide range of applications.

Year of construction: 2000, condition: used, Landini Water Pump • Model CU5/A • Output 84 m³ • Power 50 HP • Max. pressure 10.4 bar • Not self-priming • Three-point hitch • Suction hose • PTO-driven pump with single impeller for high pressure. Specially suited for small irrigation reels. • Comes with hoses and sprinklers Condition: Used Gjdjz Rxlpjpfx Acaouh Year of manufacture: 2000

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Well-maintained cabinet machine for band saws, new model. Includes a clamping device for band saws. Used very little. Photos show the original condition. Gujdpfx Ajz R S E Rjcaoh

Condition: used, This listing is for a Charles Austen Pumps Dymax 30 Vacuum Pump. The unit is in full working condition and is ready for immediate release. The Dymax series includes diaphragm pumps that are engineered to deliver a clean, oil-free vacuum or pressure source, making them ideal for a range of applications from laboratories to industrial settings. Key Specifications: Dimensions: Approximately 210 x 151 x 125 mm (width x depth x height), allowing for compact installation. Max Flow Rate: Capable of achieving a maximum flow rate of up to 14 L/min, ensuring efficient performance for various tasks. Ultimate Vacuum: Can reach an ultimate vacuum of up to 240 mbar, suitable for applications requiring low pressure. Weight: Each unit weighs around 1.6 kg, making it lightweight and portable. Features: Continuous Operation: Designed for long-term use without overheating, making them reliable for demanding applications. Whisper Quiet: Operates at low noise levels, ideal for environments where sound levels need to be minimized. Rugged Reliability: Built to withstand tough conditions, ensuring long-lasting performance. Flexibility and Customization: Can be tailored to meet specific requirements, enhancing versatility across different applications. Gedpfx Ajxxz Nhscajuh Safety Compliance: Adheres to IEC 1010 standards, ensuring safety in operation. Applications: The Dymax series pumps are suitable for a variety of uses, including: Laboratory Use: Ideal for tasks requiring accurate and clean vacuum or pressure sources. Industrial Applications: Versatile enough for various processes in manufacturing settings. OEM Uses: Customizable options make them suitable for original equipment manufacturers needing specific functionalities.

Condition: used, Year of construction: 2006, functionality: unexamined, High-frequency welding machine ERKA (06-016-101) FIAB HF generator 8 kW, model P-8 GF with accessories Location: Bad Tölz Inspection is welcome. Gedpfx Acezud Aioajuh We have other used machines available. Please contact us.

Condition: used, KMA Heat Exchanger and Pumping Station Gujdpfx Aeym Dx Aecaeh

Year of construction: 1977, condition: used, Name: High Pressure Pump Manufacturer: Abel Type: AK57/105 Year built: 1977 Material: mild steel Driving force: 55 kW Dimensions: L 2500 x W 1100 x H 1000mm Empty weight: 1200 kg Gsdpfx Ash Unlkecajuh Speed: 326 rpm Flow rate: 240 liters/min Operating pressure: 100 bar Operating voltage: 380/660 V Type of protection: 44 Flanges: DN 65 Condition: Used Message: Frequency range: 50 Hz, protection class: 44, flanges: DN 65 Price: on request

Year of construction: 1977, condition: refurbished (used), functionality: fully functional, machine/vehicle number: 6082, S.A. Central Adams Heavy Duty Press & Pump (Made in Italy / Milano) Heavy-duty industrial press complete with hydraulic pump unit. Previously used within a manufacturing environment and now surplus to requirements following equipment changes. Specification: Manufacturer: S.A. Central Adams Model: MTE 84 EXS0-D Heavy-duty industrial construction Gusdez Nkuajpfx Acash Hydraulic press and pump assembly Suitable for workshop, engineering, fabrication, manufacturing and maintenance applications Condition The machine was operational when last in use but is being sold as surplus equipment. Due to its age and the nature of industrial machinery, it is sold as seen without warranty. Buyers are welcome and encouraged to inspect prior to bidding. Collection: Collection only due to size and weight. Forklift loading may be available by prior arrangement. Located in Edenbridge, Kent, TN8 6HL, England Important Sold strictly as seen. Viewing welcomed. Please contact for further information, dimensions or additional photographs. This is a substantial industrial machine and represents an excellent opportunity for workshops, engineers, machinery dealers or refurbishment specialists. Keywords: Hydraulic Press, Workshop Press, Industrial Press, Engineering Machinery, Manufacturing Equipment, Fabrication Equipment, Heavy Duty Press, Hydraulic Pump Unit, Factory Machinery., Factory Machinery.

Condition: good (used), Year of construction: 2001, For cardboard traysWith Busch vacuum pump More information or a quote? Do this quick and easily via the Duijndam Machines website! You can also give us a call. Gjdpfxsz Rcbbo Acajuh See all the available machines at our website. Since 1977 supplier of reliable used agricultural and horticultural equipmentMachines are checked for deliveryExperienced teamWe can help you with getting the machine to your company Duijndam Machines The specialist in used agriculture and horticulture machinery

Condition: excellent (used), Rowatec MM 33 - Transformer welding machine Gusdez Sb Ukspfx Acajh - Transformer with thick copper winding - Power: 330A - 60%, 250A - 100% - Voltage range: 15.8V - 33V - Current protection: 22A, 400V - Stepped voltage adjustment (10 fine adjustment positions, 2 coarse adjustment positions) - Smooth wire feed adjustment - 4-roller wire feeder - Welding modes: 2-stroke, 2-stroke spot welding, 2-stroke timed welding, 4-stroke, 4-stroke spot welding, 4-stroke timed welding - Smooth adjustment of pause duration and welding duration - Wire retraction time after welding

Condition: used, functionality: limited functionality, 3 x OTC robots including manipulator sets Dr-4200L (not functional) 2 x FD-V6L (functional up until the time of disassembly/storage) 4 x welding units CPVAS350 Gsdpfjz Ipc Ejx Acajuh 3 x manipulators All items are offered as a single set. The equipment is packed and stored in a warehouse.

Condition: used, functionality: fully functional, mileage: 428,788 km, first registration: 07/2026, Year of construction: 2007, operating hours: 984 h, ASTRA HD8 84.48-80 with Sermac 28m concrete pump First registered on July 9th, 2007 – Euro 5 Mileage: 428,788 km Operating hours: 984 Guodpfjz Rmmhex Acash Equipment: Sermac 28m SCC73-4Z28 concrete pump Tires: 50-60% tread remaining Valid inspection certificate Good condition Available immediately WE WILL CONSIDER TRADING IN VEHICLES OF ALL BRANDS, INCLUDING MAN, MERCEDES, DAF, RENAULT, VOLVO, AND SCANIA, EQUIPPED WITH CIFA, SERMAC, OR PUTZMEISTER EQUIPMENT; OR EARTHMOVING MACHINERY FROM CATERPILLAR, FIAT HITACHI, OR KOMATSU.

Condition: good (used), functionality: fully functional, Two KSB ETANORM SYT horizontal single stage centrifugal pumps, model ETNY 080-065-160 SG DB25LD20125. Mounted on metal base frames and driven by three phase electric motors with guarded couplings. Indicated nominal data: flow rate of 105 cubic metres per hour, total head of 28 m, operating speed of 2,958 rpm and diameter of 160 mm. One unit was manufactured in 2018 and the other in 2020. ATEX II 2G execution. Each pump incorporates an EagleBurgmann TS1016/A007-00 double mechanical seal manufactured in 2020, with an 8 litre jacket volume, 0.2 litre tube volume, maximum allowable pressure of 16 bar, test pressure of 28 bar and temperature range from minus 60 to plus 200 degrees Celsius. The system includes instrumentation, auxiliary piping, reservoirs, R. STAHL explosion proof local electrical control panels and a support structure. Gedpez R Azuofx Acajuh

Condition: used, NMNE 40 872 317 NMNE 40EA596 376 Stainless steel pump housing with screw Hygiene version with bearing housing Stator NEMO LASI S65l d11027327001 Motor 7.5 kW, 1425 rpm / 250 rpm Inlet DN50 (± 400mm) Outlet connection DN 30 (± 400mm) Dimensions: (L x W x H): ± 2.400 x 500 x 600 mm Guedpfxjz Rnzaj Acajh

Condition: new, power: 335 kW (455.47 HP), fuel type: diesel, overall weight: 42,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 10/2028, color: white, gearing type: automatic, emission class: euro6, Year of construction: 2026, Equipment: air conditioning, Internal vehicle number: G300327 Available immediately at our yard in Kaufungen. More information at: * Luis Lucena * Viktoria Sologubova Mercedes-Benz Arocs 4146 8x4 PUMI – SERMAC 4Z28 – 8.5 m³ concrete mixer pump New Mercedes-Benz Arocs 4146 8x4 with SERMAC 4Z28 concrete mixer pump. The superstructure combines a concrete mixer with a high-performance concrete pump and a four-section Z-boom. The vehicle features two SERMAC radio remote controls and a theoretical delivery rate of up to 73 m³/h. Chassis specifications: * Vehicle number: G300327 * Vehicle condition: New * Category: Concrete mixer pump / PUMI * Manufacturer: Mercedes-Benz * Model: Arocs 4146 * Year: 2026 * Mileage (according to display): 1,301 km * Engine displacement: 10,677 cm³ * Power: 335 kW (455 hp) * Fuel type: Diesel * Drive type: Internal combustion engine * Transmission: Automatic * Emission class: Euro 6 * Environmental badge: 4 (Green) * Axles: 4 * Wheel configuration: 8x4 * Permissible total weight: 42,000 kg * Air conditioning * MOT: New * Color: White SERMAC concrete mixer pump: * Manufacturer: SERMAC Srl * Model: 4Z28 * Superstructure type: Concrete mixer pump * Year of superstructure construction: 2025 * Serial number: PA361 * Four-section Z-boom * Model-specific reach class: 28 m * Pump unit: BS6C07-73:70 * Theoretical delivery rate: up to 73 m³/h Gedoytllkspfx Acaeuh * Maximum theoretical concrete pressure: 70 bar * Hydraulic oil pressure: 350 bar * Diameter of the concrete delivery cylinder: 125 mm * Nominal volume of the mixer drum: 8.5 m³ * Geometric drum volume: 14 m³ * CE marking available Equipment: * Two SERMAC radio remote controls * Hydraulic outriggers * Radio control of the concrete pump * Mixer superstructure with hopper * Concrete delivery line * Work lights on the superstructure * Rotating beacons * Front grille on the headlights * Air conditioning Inspection and functional testing are possible by prior appointment. Further information, photos, technical documents and videos are available upon request. Errors, changes and prior sale reserved.

Condition: used, Our experience with the E-series propeller pumps enabled us to develop the ET-series mobile pump: high pump performance (over 800 l/s) with remarkable energy savings (up to 40%). The ET mobile pump series is unique in its category, as it can provide high flow rates with limited energy consumption. This was achieved by implementing propeller pump hydraulics. Condition: Used Condition: New Gujdpfx Acez Rwtreaeh